AD-30 / AD-50 Parts Manual 1987 thru 1991

AD-30 / AD-50
Parts Manual
1987 thru 1991
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
050492
ADC Part No. 450096
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors or liquids
in the vicinity of this or any other
appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables dans le voisinage de cet
appareil ou de yout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________
MODEL NO. __________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s)
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
Table of Contents
AD-30 High Security Control Door Assembly ......................................................................................... 4
AD-50 High Security Control Door Assembly ......................................................................................... 5
Phase 3 OPL Microprocessor Control Panel Assembly ....................................................................... 6, 7
Phase 3 OPL Microprocessor Control Box Assembly ......................................................................... 8, 9
Phase 4 OPL Non-Reversing Microprocessor Control Panel Assembly ................................................. 10
Phase 4 OPL Non-Reversing Microprocessor Control Box Assembly ....................................................11
Phase 4 OPL Reversing Microprocessor Control Panel Assembly.......................................................... 12
Phase 4 OPL Reversing Microprocessor Control Box Assembly............................................................ 13
Phase 4 Single Coin Microprocessor Control Panel Assembly ............................................................... 14
Phase 4 Single Coin Microprocessor Control Box Assembly ................................................................. 15
Phase 4 Dual Coin Microprocessor Control Panel Assembly ................................................................. 16
Phase 4 Dual Coin Microprocessor Control Box Assembly ................................................................... 17
Phase 4.1 Single Coin Microprocessor Control Panel Assembly ............................................................ 18
Phase 4.1 Single Coin Microprocessor Control Box Assembly .............................................................. 19
Phase 4.1 Dual Coin Microprocessor Control Panel Assembly .............................................................. 20
Phase 4.1 Dual Coin Microprocessor Control Box Assembly ................................................................ 21
Dual Timer Control Panel Assembly ................................................................................................ 22, 23
Dual Timer Control Box Assembly .................................................................................................. 24, 25
Non-Microprocessor Coin Meter Control Panel Assembly .............................................................. 26, 27
Non-Microprocessor Coin Meter Control Box Assembly ................................................................ 28, 29
AD-30/AD-50 Coin Vault Assembly ..................................................................................................... 30
AD-30 Slide Meter Case Assembly ...................................................................................................... 31
AD-30 Slide Meter Control Box Assembly
For Models Mfd. with Globar® Ignition ONLY .......................................................................... 32
AD-30 Slide Meter Control Box Assembly
For Models Mfd. with Direct Spark Ignition (DSI) ONLY ........................................................ 33
AD-30/AD-50 Main Door Assembly
For Door Magnet Type Models ONLY ...................................................................................... 34
AD-30 Front Panel Assembly
For Door Magnet Type Models ONLY ...................................................................................... 35
AD-30/AD-50 Main Door Assembly
For Door Latch Type Models ONLY .......................................................................................... 36
AD-50 Front Panel Assembly
For Door Magnet Type Models ONLY ...................................................................................... 37
AD-30 Front Panel Assembly
For Door Latch Type Models ONLY .......................................................................................... 38
AD-50 Front Panel Assembly
For Door Latch Type Models ONLY .......................................................................................... 39
Plunger Type Main Door Switch Assembly ............................................................................................ 40
New Style (N.S.) Series Main Door Switch Assembly........................................................................... 41
AD-30 Basket (Tumbler)/Support Assemblies
For Models Mfd. with Non-Tapered Ribs ONLY ...................................................................... 42
AD-50 Basket (Tumbler)/Support Assemblies
For Models Mfd. with Non-Tapered Ribs ONLY ...................................................................... 43
AD-50 Basket (Tumbler)/Support Assemblies
For Models Mfd. with Tapered Ribs ONLY ............................................................................... 44
AD-30 Drop Lint Door Assembly ......................................................................................................... 45
AD-50 Drop Lint Door Assembly ................................................................................................... 46, 47
AD-30 Lint Trap Assembly ................................................................................................................... 48
AD-50 Lint Trap Assembly ................................................................................................................... 49
AD-30 Basket (Tumbler) Bearing Assembly .................................................................................... 50, 51
AD-50 Basket (Tumbler) Bearing Assembly .................................................................................... 52, 53
AD-30/AD-50 Idler Bearing Assembly ........................................................................................... 54, 55
AD-30 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
For Models Mfd. with Non-Tapered Ribs ONLY ................................................................ 56, 57
AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
For Models Mfd. with Non-Tapered Ribs ONLY ................................................................ 58, 59
AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
For Models Mfd. with Non-Tapered Ribs ONLY ................................................................ 60, 61
AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
For Models Mfd. with Tapered Ribs ONLY......................................................................... 62, 63
AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
For Models Mfd. with Tapered Ribs ONLY ......................................................................... 64, 65
Sensor Bracket Assemblies ............................................................................................................. 66, 67
ADG-30 Standard Non-Hi/Lo Burner Assembly
For Models Mfd. with Globar® Ignition ONLY .................................................................... 68, 69
ADG-50 Standard Non-Hi/Lo Burner Assembly
For Models Mfd. with Globar® Ignition ONLY .................................................................... 70, 71
ADG-30/ADG-50 Hi/Lo Computerized Burner Assembly
For Models Mfd. with Globar® Ignition ONLY .................................................................... 72, 73
ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. with Direct Spark Ignition (DSI) ONLY .................................................. 74, 75
ADE-30/ADE-50 Electric Oven Assembly
For Models Mfd. as of November 12, 1990 ......................................................................... 76, 77
ADE-30/ADE-50 Electric Oven Assembly
For Models Mfd. prior to November 12, 1990 ..................................................................... 78, 79
ADG-30/ADG-50 Sail Switch/Hi-Limit Assemblies
For Globar® Models and Direct Spark Ignition (DSI) Models ONLY ...................................... 80
ADG-30/ADG-50 Replacement Coils For 3/8” Non-Hi/Lo Gas Valve
For Globar® Ignition Models ONLY .......................................................................................... 81
ADG-30/ADG-50 Replacement Coils For 3/8” Hi/Lo Gas Valve
For Globar® Ignition Models ONLY ........................................................................................... 82
Microprocessor Reversing Rear Control Box Assembly
For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays .................. 83
Dual Timer Reversing Rear Control Box Assembly
For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays .................. 84
Microprocessor Reversing Rear Control Box Assembly
For Models Mfd. with 208 Volt or 230 Volt Controls with Dunco (Struthers-Dunn) Relays ... 85
Dual Timer Reversing Rear Control Box Assembly
For Models Mfd. with 208 Volt or 230 Volt Controls with Dunco (Struthers-Dunn) Relays ... 86
3-Phase (3Ø) Motor, Electric Relay Panel Assembly
For Models Mfd. with 208 Volt or 230 Volt Controls with Furnas Relays ............................... 87
3-Phase (3Ø) Motor, Electric Relay Panel Assembly
For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays .................. 88
Control/Heat Step Down Transformer
For Globar® Models and High Pressure Motorized Steam Valve Models ONLY ................... 89
ADS-30 Steam Coil Damper Assembly .......................................................................................... 90, 91
ADS-50 Steam Coil Damper Assembly .......................................................................................... 92, 93
ADS-30/ADS-50 Steam Coil/Valve Assembly
For Motorized Type and Solenoid Type Models ONLY ............................................................ 94
AD-30/AD-50 Outer Top/Back Guard Assemblies ............................................................................... 95
ADG-30/ADG-50 Heat Reclaimer Assembly ........................................................................................ 96
Relay Board Listing .............................................................................................................................. 97
Microprocessor Coin Acceptors Listing ................................................................................................ 98
Coin Meter Replacement Parts ............................................................................................................. 99
ADG-30/ADG-50 Globar® Burner Assembly Specifications ................................................................ 100
ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly Specifications ................................... 101
ADE-30/ADE-50 Electric Oven Component Application Charts
For Models Mfd. as of November 12, 1990 ............................................................................. 102
ADE-30/ADE-50 Electric Oven Component Application Charts
For Models Mfd. prior to November 12, 1990 ......................................................................... 103
Additional Parts Available ................................................................................................................... 104
4
AD-30 High Security Control Door Assembly
Illus. No.
Part No.
Qty.
1
160015
1
160017
1
160104
160016
881053
870011
800023*
1
1
1
1
1
800140
1
180200
102307
150201
150309
102600
102601
102502
1
3
5
4
1
1
1
2
3
4
5
6
7
8
9
10
11
*
Description
High Security MK-100 Lock Assembly with Key
(for coin models Only)
Special Dummy Lock ONLY
(for non-coin models Only)
MK-100 Key ONLY
Lock Cam ONLY
ADC Logo with Tape
Double Sided Tape Kit
AD-30 High Security Control Door Assembly without Lock
(includes illus. nos. 4 through 7)
AD-30 Stainless Steel High Security Control Door Assembly without Lock
(includes illus. nos. 4 through 7)
AD-30 Top Gray Trim Strip with Lock Hole
Trim Bumper Gasket (sold by the foot)
#10-32 x 1/4” Phillips Pan Head TEK Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Control Door Rod Support Catch
Control Door Rod Retainer Clip
Control Door Support Rod
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
5
AD-50 High Security Control Door Assembly
Illus. No.
Part No.
Qty.
1
160015
1
160017
1
4
160104
160032
881053
870011
800022*
1
1
1
1
1
5
6
7
8
9
10
11
180201
102307
150201
150309
102600
102601
102502
1
3
5
4
1
1
1
2
3
*
Description
High Security MK-100 Lock Assembly with Key
(for coin models Only)
Special Dummy Lock ONLY
(for non-coin models Only)
MK-100 Key ONLY
Lock Cam ONLY
ADC Logo with Tape
Double Sided Tape Kit
AD-50 High Security Control Door Assembly without Lock
(includes illus. nos. 4 through 7)
AD-50 Top Gray Trim Strip with Lock Hole
Trim Bumper Gasket (sold by the foot)
#10-32 x 1/4” Phillips Pan Head TEK Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Control Door Rod Support Catch
Control Door Rod Retainer Clip
Control Door Support Rod
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
6
American Dryer Corporation
Phase 3 OPL Microprocessor Control Panel Assembly
88 Currant Road / Fall River, MA 02720-4781
7
Phase 3 OPL Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
112535
112276
1
1
112275
1
112277
1
112278
1
800057
800164
1
1
800161
1
800163
1
865088*
1
865089*
1
137092
137093
1
1
137094
137095
1
1
152001
882541
4
1
2
3
4
5
*
Description
OPL English Keyboard Label Assembly
OPL Stick-On Labels
(English Only) ... Not Illustrated
OPL Stick-On Labels
(Spanish, Italian, and Hebrew) ... Not Illustrated
3 Language OPL Stick-On Labels
(English, Spanish, and Hebrew) ... Not Illustrated
5 Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese) ... Not Illustrated
Microprocessor Controller (computer) Control Panel ONLY
Microprocessor Controller (computer) Control Panel ONLY
with Battery Bracket
Phase 3 OPL Non-Reversing Control Panel Assembly Complete
(includes illus. nos. 1 through 5)
Phase 3 OPL Non-Reversing Control Panel Assembly Complete
with Battery Option
(includes illus. nos. 1 through 5)
Phase 3 OPL Reversing Control Panel Assembly Complete
(includes illus. nos. 1 through 5)
Phase 3 OPL Reversing Control Panel Assembly Complete
with Battery Option
(includes illus. nos. 1 through 5)
Phase 3 OPL Non-Reversing Microprocessor Controller (computer) ONLY
Phase 3 OPL Non-Reversing Microprocessor Controller (computer)
ONLY with Battery Clip
Phase 3 OPL Reversing Microprocessor Controller (computer) ONLY
Phase 3 OPL Reversing Microprocessor Controller (computer) ONLY
with Battery Clip
#8-32 Hex Nut
Spring Turn Latch Assembly
Used on dryer models with reversing option ONLY.
IMPORTANT: Check label on computer chip to verify correct part number of microprocessor controller
(computer).
NOTE: OPL microprocessor controllers (computers) listed are suitable for ALL voltage applications.
Telephone: (508) 678-9000
Fax: (508) 678-9447
8
American Dryer Corporation
Phase 3 OPL Microprocessor Control Box Assembly
88 Currant Road / Fall River, MA 02720-4781
9
Phase 3 OPL Microprocessor Control Box Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
137021
122800
137020
150315
137022
137013
---------
*
1
1
1
1
**
1
7
137061
131916
1
***
131930
***
140150
136052
150309
131030
1
***
2
1
131031
1
150002
120709
151000
2
1
2
8
9
10
11
12
13
14
Description
Microprocessor Socket ONLY
Microprocessor (female) Pin Extraction Tool
15-Pin Microprocessor Connector ONLY
#6 x 3/8” Phillips Pan Head Screw
15-Pin Strain Relief ONLY
Nylon Standoff
Arc Suppressor (A.S.) Relay Board
(refer to Relay Board Listing on page 97)
Arc Suppressor (A.S.) Board ONLY without Relays
P.C.B. (electromechanical) Relay ONLY
(for 120 volt models Only)
P.C.B. (electromechanical) Relay ONLY
(for 208/230 volt models Only)
Diode Logic Board (for gas models Only)
4-Amp Fuse ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Steam Valve Relay
(for high pressure steam models Only)
For 120 Volt Models ONLY
Steam Valve Relay
(for high pressure steam models Only)
For 208/230 Volt Models ONLY
#6-32 x 1” Phillips Round Head Machine Screw
8-Position Terminal Strip
#6-32 Pal Nut
* Quantity required is 13 or 15 required.
** Quantity required is 4 or 8 required.
*** Quantity required is 1 or 2 required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
10
Phase 4 OPL Non-Reversing Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
112535
112276
1
1
112275
1
112277
1
112278
1
800057
800164
1
1
800171
1
865095
1
137125
1
137126
1
152001
882541
4
1
2
3
4
5
Description
OPL English Keyboard Label Assembly
OPL Stick-On Labels
(English Only) ... Not Illustrated
OPL Stick-On Labels
(Spanish, Italian, and Hebrew) ... Not Illustrated
3 Language OPL Stick-On Labels
(English, Spanish, and Hebrew) ... Not Illustrated
5 Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese) ... Not Illustrated
Microprocessor Controller (computer) Control Panel ONLY
Microprocessor Controller (computer) Control Panel ONLY
with Battery Bracket
Phase 4 OPL Non-Reversing Control Panel Assembly Complete
(includes illus. nos. 1 through 5)
Phase 4 OPL Non-Reversing Control Panel Assembly Complete
with Battery Option
(includes illus. nos. 1 through 5)
Phase 4 OPL Non-Reversing Microprocessor Controller (computer)
ONLY
Phase 4 OPL Non-Reversing Microprocessor Controller (computer)
ONLY with Battery Clip
#8-32 Hex Nut
Spring Turn Latch Assembly
IMPORTANT: Check label on computer chip to verify correct part number of microprocessor controller
(computer).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Phase 4 OPL Non-Reversing Microprocessor Control Box Assembly
Illus. No.
Part No.
Qty.
1
137021
122800
137020
150315
137022
137013
---------
12
1
1
1
1
4
1
8
9
137061
131916
131930
136057
136052
150300
141403
1
1
1
*
*
2
1
10
11
150309
131030
2
1
131031
1
150002
120715
151000
136057
150301
136008
2
1
2
*
*
*
2
3
4
5
6
7
12
13
14
15
16
17
*
11
Description
Microprocessor Socket ONLY
Microprocessor (female) Pin Extraction Tool
15-Pin Microprocessor Connector ONLY
#6 x 3/8” Phillips Pan Head Screw
15-Pin Strain Relief ONLY
Nylon Standoff
Solid State Relay (SSR) Board
(refer to Relay Board Listing on page 97)
Arc Suppressor (A.S.) Board ONLY without Relays
P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only)
P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only)
1/2-Amp (slo blo) Fuse ONLY
4-Amp Fuse ONLY
#10-16 x 1/2” Hex Washer TEK Screw
Direct Spark Ignition (DSI) 24 VAC Transformer
(for gas models with Direct Spark Ignition [DSI] Only)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Steam Valve Relay (for high pressure steam models Only)
For 120 Volt Models ONLY
Steam Valve Relay (for high pressure steam models Only)
For 208/230 Volt Models ONLY
#6-32 x 1” Phillips Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
1/2-Amp (slo blo) Fuse ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fuse Block/Strip ONLY
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
12
Phase 4 OPL Reversing Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
112535
112276
1
1
112275
1
112277
1
112278
1
800057
800164
1
1
865092
1
865096
1
3
137127
137128
1
1
4
5
152001
882541
4
1
2
Description
OPL English Keyboard Label Assembly
OPL Stick-On Labels
(English Only) ... Not Illustrated
OPL Stick-On Labels
(Spanish, Italian, and Hebrew) ... Not Illustrated
3 Language OPL Stick-On Labels
(English, Spanish, and Hebrew) ... Not Illustrated
5 Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese) ... Not Illustrated
Microprocessor Controller (computer) Control Panel ONLY
Microprocessor Controller (computer) Control Panel ONLY
with Battery Bracket
Phase 4 OPL Reversing Control Panel Assembly Complete
(includes illus. nos. 1 through 5)
Phase 4 OPL Reversing Control Panel Assembly Complete
with Battery Option
(includes illus. nos. 1 through 5)
Phase 4 OPL Reversing Microprocessor Controller (computer) ONLY
Phase 4 OPL Reversing Microprocessor Controller (computer) ONLY
with Battery Clip
#8-32 Hex Nut
Spring Turn Latch Assembly
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller
(computer).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Phase 4 OPL Reversing Microprocessor Control Box Assembly
Illus. No.
Part No.
Qty.
1
137021
122800
137020
150315
137022
137013
---------
12
1
1
1
1
4
1
8
9
137061
131930
136057
136052
150300
141403
1
1
*
*
2
1
10
11
150309
131030
2
1
12
13
14
15
16
17
150002
120715
151000
136057
150301
136008
2
1
2
*
*
*
2
3
4
5
6
7
*
13
Description
Microprocessor Socket ONLY
Microprocessor (female) Pin Extraction Tool
15-Pin Microprocessor Connector ONLY
#6 x 3/8” Phillips Pan Head Screw
15-Pin Strain Relief ONLY
Nylon Standoff
Solid State Relay (SSR) Board
(refer to Relay Board Listing on page 97)
Arc Suppressor (A.S.) Board ONLY without Relays
P.C.B. (electromechanical) Relay ONLY (for 220 volt models Only)
1/2-Amp (slo blo) Fuse ONLY
4-Amp Fuse ONLY
#10-16 x 1/2” Hex Washer TEK Screw
Direct Spark Ignition (DSI) 24 VAC Transformer
(for gas models with Direct Spark Ignition [DSI] Only)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Steam Valve Relay (for high pressure steam models Only)
For 120 Volt Models ONLY
#6-32 x 1” Phillips Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
1/2-Amp (slo blo) Fuse ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fuse Block/Strip ONLY
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
14
Phase 4 Single Coin Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
2
112526
800088
1
1
800168
1
800040
800039
150415
137110
137115
1
1
1
1
1
5
6
7
152001
153012
---------
4
4
1
8
9
10
137056
137023
137021
865050
122800
1
1
3
1
1
3
4
--
Description
Coin Keyboard Label Assembly
Phase 4 Coin Control Panel Assembly
(includes illus. nos. 1, 2, 4, 5, and 6)
Phase 4 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, 4, 5, and 6)
Coin Control Panel ONLY
Coin Control Panel ONLY with Battery Bracket
#10-16 x 1/2” Phillips Round Head Crimptite Screw
Phase 4 Coin Microprocessor Controller (computer) ONLY
Phase 4 Coin Microprocessor Controller (computer) ONLY
with Battery Clip
#8-32 Hex Nut
#8 Star Washer
Microprocessor Single Coin Acceptor with Optical Switch
(refer to Microprocessor Coin Acceptors Listing on page 98)
Optic Switch ONLY
Optic Switch Connector ONLY
Microprocessor Socket ONLY
Single Coin Optical Switch Harness
Microprocessor (female) Pin Extraction Tool
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller
(computer).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Phase 4 Single Coin Microprocessor Control Box Assembly
Illus. No.
Part No.
Qty.
1
2
137020
137021
122800
150315
137022
137013
---------
1
14
1
1
1
4
1
137061
131916
131930
136052
150309
131030
1
*
*
*
2
1
131031
1
150002
120709
151000
2
1
2
3
4
5
6
7
8
9
10
11
12
13
*
15
Description
15-Pin Microprocessor Connector ONLY
Microprocessor Socket ONLY
Microprocessor (female) Pin Extraction Tool
#6 x 3/8” Phillips Pan Head Screw
15-Pin Strain Relief ONLY
Nylon Standoff
Arc Suppressor (A.S.) Relay Board
(refer to Relay Board Listing on page 97)
Arc Suppressor (A.S.) Board ONLY without Relays
P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only)
P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only)
4-Amp Fuse ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Steam Valve Relay (for high pressure steam models Only)
For 120 Volt Models ONLY
Steam Valve Relay (for high pressure steam models Only)
For 208/230 Volt Models ONLY
#6-32 x 1” Phillips Round Head Machine Screw
8-Position Terminal Strip
#6-32 Pal Nut
Quantity required is 1 or 2.
Telephone: (508) 678-9000
Fax: (508) 678-9447
16
Phase 4 Dual Coin Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
2
112526
800088
1
1
800168
1
800040
800039
150309
137110
137115
1
1
1
1
1
5
6
7
152001
153012
---------
2
2
1
8
9
10
137056
137023
137021
865050
122800
1
1
3
1
1
3
4
Description
Coin Keyboard Label Assembly
Phase 4 Coin Control Panel Assembly
(includes illus. nos. 1, 2, 4, 5, and 6)
Phase 4 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, 4, 5, and 6)
Coin Control Panel ONLY
Coin Control Panel ONLY with Battery Bracket
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Phase 4 Coin Microprocessor Controller (computer) ONLY
Phase 4 Coin Microprocessor Controller (computer) ONLY
with Battery Clip
#8-32 Hex Nut
#8 Star Washer
Microprocessor Dual Coin Acceptor with Optical Switch
(refer to Microprocessor Coin Acceptors Listing on page 98)
Optic Switch ONLY
Optic Switch Connector ONLY
Microprocessor Socket ONLY
Single Coin Optical Switch Harness
Microprocessor (female) Pin Extraction Tool
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller
(computer).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Phase 4 Dual Coin Microprocessor Control Box Assembly
Illus. No.
Part No.
Qty.
1
2
137020
137021
122800
150315
137022
137013
---------
1
15
1
1
1
4
1
137061
131916
131930
136052
150309
131030
1
*
*
*
2
1
131031
1
150002
120709
151000
2
1
2
3
4
5
6
7
8
9
10
11
12
13
*
17
Description
15-Pin Microprocessor Connector ONLY
Microprocessor Socket ONLY
Microprocessor (female) Pin Extraction Tool
#6 x 3/8” Phillips Pan Head Screw
15-Pin Strain Relief ONLY
Nylon Standoff
Arc Suppressor (A.S.) Relay Board
(refer to Relay Board Listing on page 97)
Arc Suppressor (A.S.) Board ONLY without Relays
P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only)
P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only)
4-Amp Fuse ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Steam Valve Relay (for high pressure steam models Only)
For 120 Volt Models ONLY
Steam Valve Relay (for high pressure steam models Only)
For 208/230 Volt Models ONLY
#6-32 x 1” Phillips Round Head Machine Screw
8-Position Terminal Strip
#6-32 Pal Nut
Quantity required is 1 or 2.
Telephone: (508) 678-9000
Fax: (508) 678-9447
18
Phase 4.1 Single Coin Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
2
112526
865098
1
1
865099
1
800040
800039
150415
137130
137131
1
1
1
1
1
5
6
7
152001
153012
---------
4
4
1
8
9
10
-----
137056
137023
137021
865050
122800
1
1
3
1
1
3
4
Description
Coin Keyboard Label Assembly
Phase 4.1 Coin Control Panel Assembly
(includes illus. nos. 1, 2, 4, 5, and 6)
Phase 4.1 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, 4, 5, and 6)
Coin Control Panel ONLY
Coin Control Panel ONLY with Battery Bracket
#10-16 x 1/2” Phillips Round Head Crimptite Screw
Phase 4.1 Coin Microprocessor Controller (computer) ONLY
Phase 4.1 Coin Microprocessor Controller (computer) ONLY
with Battery Clip
#8-32 Hex Nut
#8 Star Washer
Microprocessor Single Coin Acceptor with Optical Switch
(refer to Microprocessor Coin Acceptors Listing on page 98)
Optic Switch ONLY
Optic Switch Connector ONLY
Microprocessor Socket ONLY
Single Coin Optical Switch Harness
Microprocessor (female) Pin Extraction Tool
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller
(computer).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Phase 4.1 Single Coin Microprocessor Control Box Assembly
Illus. No.
Part No.
Qty.
1
137021
122800
137020
150315
137022
137013
---------
12
1
1
1
1
4
1
8
9
137061
131916
131930
136057
136052
150300
141403
1
1
1
*
*
2
1
10
11
150309
131030
2
1
131031
1
150002
120715
151000
136057
150301
136008
2
1
2
*
*
*
2
3
4
5
6
7
12
13
14
15
16
17
*
19
Description
Microprocessor Socket ONLY
Microprocessor (female) Pin Extraction Tool
15-Pin Microprocessor Connector ONLY
#6 x 3/8” Phillips Pan Head Screw
15-Pin Strain Relief ONLY
Nylon Standoff
Arc Suppressor (A.S.) Relay Board
(refer to Relay Board Listing on page 97)
Arc Suppressor (A.S.) Board ONLY without Relays
P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only)
P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only)
1/2-Amp (slo blo) Fuse ONLY
4-Amp Fuse ONLY
#10-16 x 1/2” Hex Washer TEK Screw
Direct Spark Ignition (DSI) 24 VAC Transformer
(for gas models with Direct Spark Ignition [DSI] Only)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Steam Valve Relay (for high pressure steam models Only)
For 120 Volt Models ONLY
Steam Valve Relay (for high pressure steam models Only)
For 208/230 Volt Models ONLY
#6-32 x 1” Phillips Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
1/2-Amp (slo blo) Fuse ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fuse Block/Strip ONLY
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
20
Phase 4.1 Dual Coin Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
2
112526
865098
1
1
865099
1
800040
800039
150309
137130
137131
1
1
1
1
1
5
6
7
152001
153012
---------
2
2
1
8
9
10
137056
137023
137021
865051
122800
1
1
3
1
1
3
4
Description
Coin Keyboard Label Assembly
Phase 4.1 Coin Control Panel Assembly
(includes illus. nos. 1, 2, 4, 5, and 6)
Phase 4.1 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, 4, 5, and 6)
Coin Control Panel ONLY
Coin Control Panel ONLY with Battery Bracket
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Phase 4.1 Coin Microprocessor Controller (computer) ONLY
Phase 4.1 Coin Microprocessor Controller (computer) ONLY
with Battery Clip
#8-32 Hex Nut
#8 Star Washer
Microprocessor Dual Coin Acceptor with Optical Switch
(refer to Microprocessor Coin Acceptors Listing on page 98)
Optic Switch ONLY
Optic Switch Connector ONLY
Microprocessor Socket ONLY
Dual Coin Optical Switch Harness
Microprocessor (female) Pin Extraction Tool
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller
(computer).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Phase 4.1 Dual Coin Microprocessor Control Box Assembly
Illus. No.
Part No.
Qty.
1
137021
122800
137020
150315
137022
137013
---------
12
1
1
1
1
4
1
8
9
137061
131916
131930
136057
136052
150300
141403
1
1
1
*
*
2
1
10
11
150309
131030
2
1
131031
1
150002
120715
151000
136057
150301
136008
2
1
2
*
*
*
2
3
4
5
6
7
12
13
14
15
16
17
*
21
Description
Microprocessor Socket ONLY
Microprocessor (female) Pin Extraction Tool
15-Pin Microprocessor Connector ONLY
#6 x 3/8” Phillips Pan Head Screw
15-Pin Strain Relief ONLY
Nylon Standoff
Arc Suppressor (A.S.) Relay Board
(refer to Relay Board Listing on page 97)
Arc Suppressor (A.S.) Board ONLY without Relays
P.C.B. (electromechanical) Relay ONLY (for 120 volt models Only)
P.C.B. (electromechanical) Relay ONLY (for 208/230 volt models Only)
1/2-Amp (slo blo) Fuse ONLY
4-Amp Fuse ONLY
#10-16 x 1/2” Hex Washer TEK Screw
Direct Spark Ignition (DSI) 24 VAC Transformer
(for gas models with Direct Spark Ignition [DSI] Only)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Steam Valve Relay (for high pressure steam models Only)
For 120 Volt Models ONLY
Steam Valve Relay (for high pressure steam models Only)
For 208/230 Volt Models ONLY
#6-32 x 1” Phillips Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
1/2-Amp (slo blo) Fuse ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fuse Block/Strip ONLY
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
22
American Dryer Corporation
Dual Timer Control Panel Assembly
88 Currant Road / Fall River, MA 02720-4781
Dual Timer Control Panel Assembly
Illus. No.
Part No.
Qty.
1
123000
123001
122400
865550
1
1
1
1
865551
1
800051
131812
131813
150207
154001
152013
153010
120713
1
1
1
2
2
2
2
1
120708
1
150002
150110
150001
131030
131031
151000
112050
882541
124103
124020
124021
124022
124023
122602
122700
122801
2
4
2
1
1
2
1
1
2
1
1
1
1
1
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
---
Telephone: (508) 678-9000
23
Description
Red Indicator Light (for 120 volt models Only)
Red Indicator Light (for 230 volt models Only)
Rocker Heat Selector Switch
Dual Timer Control Panel Assembly Complete
(includes illus. nos. 1 through 21)
For 120 Volt Models ONLY
Dual Timer Control Panel Assembly Complete
(includes illus. nos. 1 through 21)
For 230 Volt Models ONLY
Dual Timer Control Panel ONLY
Push To Start Relay (for 120 volt models Only)
Push To Start Relay (for 230 volt models Only)
#10-24 x 1/2” Phillips Pan Head Machine Screw
#10-24 Speed Nut
#6-32 Hex Nut
#6 Star Washer
18-Position Terminal Block
(for models mfd. as of May 3, 1989)
3-Position Terminal Strip
(for models mfd. prior to May 3, 1989)
#6-32 x 1” Phillips Round Head Machine Screw
#8-32 x 1/4” Phillips Round Head Machine Screw
#6-32 x 1/2” Phillips Round Head Machine Screw
Dual Timer Relay (for 120 volt models Only)
Dual Timer Relay (for 230 volt models Only)
#6-32 Pal Nut
Dual Timer Label ONLY
Spring Turn Latch Assembly
Arrow Timer Knob
60 Minute Timer (for 120 volt models Only)
60 Minute Timer (for 230 volt models Only)
15 Minute Timer (for 120 volt models Only)
15 Minute Timer (for 230 volt models Only)
9-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
Fax: (508) 678-9447
24
American Dryer Corporation
Dual Timer Control Box Assembly
88 Currant Road / Fall River, MA 02720-4781
25
Dual Timer Control Box Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
122603
122701
122801
315010
150300
150300
141403
1
9
1
1
2
2
1
7
8
150309
131030
2
1
131031
1
131814
150309
136008
875250
136057
136052
136054
136056
150301
136002
136052
136054
136056
150002
120715
120709
151000
1
2
*
*
**
**
**
**
*
2
**
**
**
2
1
1
2
9
10
11
12*
13
14
15*
16
17
18
Description
9-Pin Socket Connector ONLY
Socket Terminal ONLY
Pin/Socket Extraction Tool
9-Pin Connector Bracket
#10-16 x 1/2” Hex Washer TEK Screw
#10-16 x 1/2” Hex Washer TEK Screw
Direct Spark Ignition (DSI) 24 VAC Transformer
(for gas models with Direct Spark Ignition [DSI] Only)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Steam Valve Relay (for high pressure steam models Only)
For 120 Volt Models ONLY
Steam Valve Relay (for high pressure steam models Only)
For 230 Volt Models ONLY
Motor Control Relay (for 120 volt controls Only)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Fuse Block/Strip ONLY
In-Line Fuse Holder Assembly ONLY
1/2-Amp (slo blo) Fuse ONLY
4-Amp Fuse ONLY
15-Amp (slo blo) Fuse
20-Amp (slo blo) Fuse
#8-18 x 7/16” Phillips Pan Head TEK Screw
Panel Mount Fuse Holder Assembly
4-Amp Fuse ONLY
15-Amp (slo blo) Fuse
20-Amp (slo blo) Fuse
#6-32 x 1” Phillips Round Head Machine Screw
30-Position Terminal Block
8-Position Terminal Strip
#6-32 Pal Nut
* As required.
** Check fuse rating for verification.
Telephone: (508) 678-9000
Fax: (508) 678-9447
26
Non-Microprocessor Coin Meter Control Panel Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
27
Non-Microprocessor Coin Meter Control Panel Assembly
Illus. No.
Part No.
Qty.
1
123000
123001
122400
800070
1
1
1
1
800071
1
800054
800052
131812
131813
150207
154001
125000
125003
150303
120712
1
1
1
1
2
2
1
1
2
1
120707
1
882541
122602
122700
122801
1
1
9
1
2
3
4
5
6
7*
8
9
10
11
12
--*
Description
Red Indicator Light (for 120 volt models Only)
Red Indicator Light (for 230 volt models Only)
Rocker Heat Selector Switch
Coin Meter Control Panel Assembly Complete
(includes illus. nos. 1 through 6 and 8 through 12)
For 120 Volt Models ONLY
Coin Meter Control Panel Assembly Complete
(includes illus. nos. 1 through 6 and 8 through 12)
For 230 Volt Models ONLY
Coin Meter Control Panel (for 12-position terminal block Only)
Coin Meter Control Panel (for 2-position terminal strip Only)
Push To Start Relay (for 120 volt models Only)
Push To Start Relay (for 230 volt models Only)
#10-24 x 1/2” Phillips Pan Head Machine Screw
#10-24 Speed Nut
25¢ Coin Meter (specify timing) For 120 Volt Models ONLY
25¢ Coin Meter (specify timing) For 230 Volt Models ONLY
#4 x 3/4” Phillips Pan Head “A” Machine Screw
12-Position Terminal Block
(for models mfd. as of May 15, 1989)
2-Position Terminal Strip
(for models mfd. prior to May 15, 1989)
Spring Turn Latch Assembly
9-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
Consult factory for coin meters not listed.
NOTE: For Coin Meter Replacement Parts refer to page 99.
Telephone: (508) 678-9000
Fax: (508) 678-9447
28
Non-Microprocessor Coin Meter Control Box Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
29
Non-Microprocessor Coin Meter Control Box Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
122603
122701
122801
315010
150300
150300
141403
1
9
1
1
2
2
1
7
8
150309
131030
2
1
131031
1
131814
150309
136008
875250
136057
136052
136054
136056
150301
136002
136052
136054
136056
150002
120715
120709
151000
1
2
*
*
**
**
**
**
*
2
**
**
**
2
1
1
2
9
10
11
12*
13
14
15*
16
17
18
Description
9-Pin Socket Connector ONLY
Socket Terminal ONLY
Pin/Socket Extraction Tool
9-Pin Connector Bracket
#10-16 x 1/2” Hex Washer TEK Screw
#10-16 x 1/2” Hex Washer TEK Screw
Direct Spark Ignition (DSI) 24 VAC Transformer
(for gas models with Direct Spark Ignition [DSI] Only)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Steam Valve Relay (for high pressure steam models Only)
For 120 Volt Models ONLY
Steam Valve Relay (for high pressure steam models Only)
For 208/230 Volt Models ONLY
Motor Control Relay (for 120 volt controls Only)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Fuse Block/Strip ONLY
In-Line Fuse Holder Assembly ONLY
1/2-Amp (slo blo) Fuse ONLY
4-Amp Fuse ONLY
15-Amp (slo blo) Fuse
20-Amp (slo blo) Fuse
#8-18 x 7/16” Phillips Pan Head TEK Screw
Panel Mount Fuse Holder Assembly
4-Amp Fuse ONLY
15-Amp (slo blo) Fuse
20-Amp (slo blo) Fuse
#6-32 x 1” Phillips Round Head Machine Screw
30-Position Terminal Block
8-Position Terminal Strip
#6-32 Pal Nut
* As required.
** Check fuse rating for verification.
Telephone: (508) 678-9000
Fax: (508) 678-9447
30
AD-30/AD-50 Coin Vault Assembly
Illus. No.
Part No.
Qty.
1
802112
1
802117
802110
1
1
4
802115
160028
875061
160105*
802020
1
1
1
1
1
5
6
7
8
9
802019
125915
802018
152014
102502
102601
102600
1
1
1
4
1
1
1
2
3
*
Description
Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 6)
Microprocessor Coin Vault ONLY
Non-Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 6)
Non-Microprocessor Coin Vault ONLY
Cam for 1/4 Turn Lock ONLY
1/4 Turn Lock with Key and Cam
1/4 Turn Mer-Pel Key ONLY
1/4 Turn Coin Box Assembly
(includes illus. nos. 2 through 5)
1/4 Turn Coin Box ONLY without Face Plate
High Security (Greenwald) Coin Box ONLY with Key
1/4 Turn Coin Box Face Plate ONLY
1/4-20 Free Spin Wash Nut
Control Door Support Rod
Control Door Rod Retainer Clip
Control Door Rod Support Catch
Specify key number when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
31
AD-30 Slide Meter Case Assembly
Illus. No.
*
Part No.
Qty.
1*
2
3
4
5
6
7
160199
160099
125908
152014
125900
154203
801700
1
1
1
4
1
6
1
8
9
10
11
12
13
14
15
16
17
315404
----------------801701
102502
102601
102600
122400
123005
131812
1
1
1
1
1
1
1
1
1
1
Description
Key ONLY for Slide Meter Lock
Lock, Key, Cam, and Hardware
Slide Meter Accumulator - 120 Volt
1/4-20 Free Spin Wash Nut
Slide Meter Case ONLY with Door Less Lock
1/4” Drive Rivet
Slide Meter Extension ONLY with Mirror
(includes illus. nos. 7 and 8)
Stainless Steel Mirror ONLY
Typical Slide Meter Coin Chute (not available from ADC)
Typical Slide Meter Coin Box (not available from ADC)
Slide Meter Case Mounting Plate
Control Door Support Rod
Control Door Rod Retainer Clip
Control Door Rod Support Catch
Rocker Heat Selector Switch
Red Indicator Light (for 120 volt models Only)
Push To Start Relay (for 120 volt models Only)
Specify key number when ordering.
IMPORTANT: Parts listed are for 120 volt controls ONLY...for other voltages contact factory.
Telephone: (508) 678-9000
Fax: (508) 678-9447
32
AD-30 Slide Meter Control Box Assembly
For Models Mfd. with Globar® Ignition ONLY
Illus. No.
Part No.
Qty.
1
2
150300
311913
311921
150309
132002
151000
120709
150002
136052
875250
150309
131814
2
1
1
2
1
2
1
2
1
1
2
1
3
4
5
6
7
8
9
10
11
American Dryer Corporation
Description
#10-16 x 1/2” Hex Washer TEK Screw
Service Box Cover Plate ONLY (9-7/8” x 4-3/8”)
Service Box Cover Plate ONLY (9-7/8” x 5-3/4”)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
200 Watt Transformer (terminals are not included)
#6-32 Pal Nut
8-Position Terminal Strip
#6-32 x 1” Phillips Round Head Machine Screw
4-Amp Fuse ONLY
In-Line Fuse Holder Assembly ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Motor Control Relay (for 120 volt controls Only)
88 Currant Road / Fall River, MA 02720-4781
33
AD-30 Slide Meter Control Box Assembly
For Models Mfd. with Direct Spark Ignition (DSI) ONLY
Illus. No.
Part No.
Qty.
1
2
150300
311913
311921
150300
141403
2
1
1
2
1
151000
120715
150002
150309
131814
136008
875250
136057
136054
136056
150301
2
1
2
2
1
*
*
**
**
**
*
3
4
5
6
7
8
9
10
11*
12*
Description
#10-16 x 1/2” Hex Washer TEK Screw
Service Box Cover Plate ONLY (9-7/8” x 4-3/8”)
Service Box Cover Plate ONLY (9-7/8” x 5-3/4”)
#10-16 x 1/2” Hex Washer TEK Screw
Direct Spark Ignition (DSI) 24 VAC Transformer
(for gas models with Direct Spark Ignition [DSI] Only)
#6-32 Pal Nut
30-Position Terminal Block
#6-32 x 1” Phillips Round Head Machine Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Motor Control Relay (for 120 volt contols Only)
Fuse Block/Strip ONLY
In-Line Fuse Holder Assembly ONLY
1/2-Amp (slo blo) Fuse ONLY
15-Amp Fuse (for 120 volt models Only)
20-Amp (slo blo) Fuse (for 208/230 volt models Only)
#8-18 x 7/16” Phillips Pan Head TEK Screw
* As required.
** Check fuse rating for verification.
Telephone: (508) 678-9000
Fax: (508) 678-9447
34
AD-30/AD-50 Main Door Assembly
For Door Magnet Type Models ONLY
Illus. No.
Part No.
Qty.
1
800136
1
800133
1
800134
1
2
3
4
5
6
7
8
9
10
11
12
13
103050
150410
152014
102350
102210
150002
102105
152013
306802
102102
150410
800131
1
4
4
1
1
2
2
2
6
4
4
2
---
170730
1
American Dryer Corporation
Description
AD-30/AD-50 Main Door Assembly Complete
(includes illus. nos. 1 through 12)
AD-30/AD-50 Main Door Assembly Less Accessories
(includes illus. nos. 1 through 3)
AD-30/AD-50 Main Door with Glass and Gasket ONLY
(includes illus. nos. 1, 2, 3, 5, and 6)
12-1/2” Stainless Steel Main Door Hinge
#10-24 x 3/8” Phillips Pan Head Taptite Screw
1/4-20 Free Spin Wash Nut
Main Door Gasket
20-7/16” Door Glass
#6-32 x 1” Phillips Round Head Machine Screw
Magnet Holder ONLY
#6-32 Hex Nut
Magnet Keeper
0.215 Door Magnet
#10-24 x 3/8” Phillips Pan Head Taptite Screw
Cast Aluminum Magnet Holder Assembly Complete
(includes illus. nos. 7 through 11)
Main Door Glass Adhesive (10.3 oz. cartridge)
88 Currant Road / Fall River, MA 02720-4781
AD-30 Front Panel Assembly
35
For Door Magnet Type Models ONLY
Illus. No.
Part No.
Qty.
1
800369*
1
800366*
1
800383
1
170340
154200
121405
150309
150300
150201
---------
2
4
1
8
1
2
1
2
3
4
5
6
7
8
*
Description
AD-30 Right Hand Front Panel (magnet type) Assembly Complete
(includes illus. nos. 1 through 4)
AD-30 Right Hand Insulated Front Panel (magnet type) Assembly
Complete
(includes illus. nos. 1 through 4)
AD-30 Stainless Steel Right Hand Front Panel (magnet type) Assembly
Complete
(includes illus. nos. 1 through 4)
3-1/2” Stainless Steel Striker Pad
5/32” Pop Rivet
Rubber Grommet
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#10-16 x 1/2” Hex Washer TEK Screw
#10-32 x 1/4” Phillips Pan Head TEK Screw
Main Door Switch
(refer to Plunger Type Main Door Switch Assembly on page 40)
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
36
AD-30/AD-50 Main Door Assembly
For Door Latch Type Models ONLY
Illus. No.
Part No.
Qty.
1
881421
1
2
3
4
5
6
800448
150410
152014
102349
102212
170730
150448
170319
150431
1
4
4
1
1
1
4
4
1
7
8
9
American Dryer Corporation
Description
Gray Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
12-1/2” Stainless Steel Main Door Hinge Assembly
#10-24 x 3/8” Phillips Pan Head Taptite Screw
1/4-20 Free Spin Wash Nut
Main Door Gasket
20-7/16” Door Glass with Four (4) Holes
Main Door Glass Adhesive (10.3 oz. cartridge)
Door Glass (nylon) Spacer
1/2” Stainless Steel Flat Head Allen Screw
Main Door Latch Screw
(#10 x 7/16” dome hex head screw)
88 Currant Road / Fall River, MA 02720-4781
AD-50 Front Panel Assembly
37
For Door Magnet Type Models ONLY
Illus. No.
Part No.
Qty.
1
800368*
1
800371*
1
800388
1
170340
154200
121405
150309
150300
150201
---------
2
4
1
8
1
2
1
2
3
4
5
6
7
8
*
Description
AD-50 Right Hand Front Panel (magnet type) Assembly Complete
(includes illus. nos. 1 through 4)
AD-50 Right Hand Insulated Front Panel (magnet type) Assembly
Complete
(includes illus. nos. 1 through 4)
AD-50 Stainless Steel Right Hand Front Panel (magnet type) Assembly
Complete
(includes illus. nos. 1 through 4)
3-1/2” Stainless Steel Striker Pad
5/32” Pop Rivet
Rubber Grommet
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#10-16 x 1/2” Hex Washer TEK Screw
#10-32 x 1/4” Phillips Pan Head TEK Screw
Main Door Switch
(refer to Plunger Type Main Door Switch Assembly on page 40)
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
38
AD-30 Front Panel Assembly
For Door Latch Type Models ONLY
Illus. No.
Part No.
Qty.
1
875300*
1
875311
1
154215
170330
150300
150309
121405
150201
---------
2
1
1
8
1
2
1
2
3
4
5
6
7
8
*
Description
AD-30 Right Hand Insulated Front Panel (latch type) Assembly
Complete
(includes illus. nos. 1, 2, 3, and 6)
AD-30 Stainless Steel Right Hand Insulated Front Panel (latch type)
Assembly Complete
(includes illus. nos. 1, 2, 3, and 6)
5/32” Pop Rivet
Friction Door Catch
#10-16 x 1/2” Hex Washer TEK Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Rubber Grommet
#10-32 x 1/4” Phillips Pan Head TEK Screw
New Style (N.S.) Series Main Door Switch
(for microprocessor models mfd. as of November 21, 1990 and
non-microprocessor models mfd. as of November 15, 1990)
Refer to New Style (N.S.) Series Main Door Switch Assembly
on page 41
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
39
AD-50 Front Panel Assembly
For Door Latch Type Models ONLY
Illus. No.
Part No.
Qty.
1
875301*
1
875312
1
154215
170330
150300
150309
121405
150201
---------
2
1
1
8
1
2
1
2
3
4
5
6
7
8
*
Description
AD-50 Right Hand Insulated Front Panel (latch type) Assembly
Complete
(includes illus. nos. 1, 2, 3, and 6)
AD-50 Stainless Steel Right Hand Insulated Front Panel (latch type)
Assembly Complete
(includes illus. nos. 1, 2, 3, and 6)
5/32” Pop Rivet
Friction Door Catch
#10-16 x 1/2” Hex Washer TEK Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Rubber Grommet
#10-32 x 1/4” Phillips Pan Head TEK Screw
New Style (N.S.) Series Main Door Switch
(for microprocessor models mfd. as of November 21, 1990 and
non-microprocessor models mfd. as of November 15, 1990)
Refer to New Style (N.S.) Series Main Door Switch Assembly
on page 41
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
40
Plunger Type Main Door Switch Assembly
Illus. No.
Part No.
Qty.
1
137003
1
2
3
401551
870010
*
1
4
313209
152003
1
1
*
Description
Plunger Type Main Door Switch ONLY
(includes illus. nos. 1, 2, and 4)
Door Switch Spacer Washer
Plunger Type Main Door Switch Assembly Complete
(includes illus. nos. 1 through 4)
For Microprocessor Models Mfd. prior to November 21, 1990 and
Non-Microprocessor Models Mfd. prior to November 15, 1990
Main Door Switch Housing ONLY
3/8-32 x 1/2” Door Switch Nut
As required.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
41
New Style (N.S.) Series Main Door Switch Assembly
Illus. No.
Part No.
Qty.
1
2
312215
800445*
1
1
880446*
1
313217
150025
153045
137004
153045
152016
1
2
2
**
2
2
3
4
5*
6
7
Description
Door Switch Actuator Arm
New Style (N.S.) Series Microprocessor Main Door Switch Housing
Assembly Complete
(includes illus. nos. 1 through 7)
For Models Mfd. as of November 21, 1990
New Style (N.S.) Series Non-Microprocessor Main Door Switch
Housing Assembly Complete
(includes illus. nos. 1 through 7)
For Models Mfd. as of November 15, 1990
Main Door Switch Housing ONLY
#4-40 x 1” Phillips Pan Head Machine Screw
#4 Lock Washer
New Style (N.S.) Series Main Door Switch ONLY
#4 Lock Washer
#4-40 Hex Nut
*
Microprocessor controller (computer) models require two (2) New Style (N.S.) series door switches.
Non-microprocessor controller (non-computer) models require one (1) New Style (N.S.) series door switch.
** Quantity is 1 or 2.
Telephone: (508) 678-9000
Fax: (508) 678-9447
42
AD-30 Basket (Tumbler)/Support Assemblies
For Models Mfd. with Non-Tapered Ribs ONLY
Illus. No.
Part No.
Qty.
1*
800703**
800803**
1
1
2
3
4
5
6
7
8
9
10
11
---
150309
301304
150518
100902
153001
800603
152004
153002
153001
116002
401010
40
4
1
4
4
1
4
4
4
1
1
Description
AD-30 Basket (tumbler) ONLY without Felt Collar
AD-30 Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 10)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
AD-30 Basket (tumbler) Rib ONLY
5/16-18 x 3/8” Socket Button Head Screw
5/16-18 x 31” Tie Rod
5/16” Flat Washer
AD-30 Basket (tumbler) Support ONLY
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Felt Collar ONLY
#847 Adhesive For Felt Collar (5.0 oz. tube)
* For stainless steel basket (tumbler), contact factory.
** Felt collar is not included and must be ordered separately.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
43
AD-50 Basket (Tumbler)/Support Assemblies
For Models Mfd. with Non-Tapered Ribs ONLY
Illus. No.
1*
2
3
4
5
6
7
8
9
10
11
---
Part No.
Qty.
800705**
800820**
1
1
800817**
1
150309
301302
301310
150518
100902
153001
800616
800614
152004
153002
153001
116002
401010
40
2
2
1
4
4
1
1
4
4
4
1
1
Description
AD-50 Basket (tumbler) ONLY without Felt Collar
AD-50 Non-Reversing Basket (tumbler) and Support Assembly
Complete
(includes illus. nos. 1 through 10)
AD-50 Reversing Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 10)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
AD-50 Basket (tumbler) Rib ONLY (low rib)
AD-50 Basket (tumbler) Baffle Rib ONLY (high rib)
5/16-18 x 3/8” Socket Button Head Screw
5/16-18 x 31” Tie Rod
5/16” Flat Washer
AD-50 Non-Reversing Basket (tumbler) Support ONLY
AD-50 Reversing Basket (tumbler) Support ONLY
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Felt Collar ONLY
#847 Adhesive For Felt Collar (5.0 oz. tube)
* For stainless steel basket (tumbler), contact factory.
** Felt collar is not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
44
AD-50 Basket (Tumbler)/Support Assemblies
For Models Mfd. with Tapered Ribs ONLY
Illus. No.
1*
2
3
4
5
6
7
8
9
10
11
---
Part No.
Qty.
800838**
800837**
1
1
800839**
1
150309
301302
301311
150518
100902
153001
800616
800614
152004
153002
153001
116002
401010
40
2
2
1
4
4
1
1
4
4
4
1
1
Description
AD-50 Basket (tumbler) ONLY with Tapered Ribs without Felt Collar
AD-50 Non-Reversing Basket (tumbler) and Support Assembly
Complete with Tapered Ribs
(includes illus. nos. 1 through 10)
AD-50 Reversing Basket (tumbler) and Support Assembly
Complete with Tapered Ribs
(includes illus. nos. 1 through 10)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
AD-50 Basket (tumbler) Rib ONLY (low rib)
AD-50 Basket (tumbler) Baffle Rib ONLY (high rib)
5/16-18 x 3/8” Socket Button Head Screw
5/16-18 x 31” Tie Rod
5/16” Flat Washer
AD-50 Non-Reversing Basket (tumbler) Support ONLY
AD-50 Reversing Basket (tumbler) Support ONLY
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Felt Collar ONLY
#847 Adhesive For Felt Collar (5.0 oz. tube)
* For stainless steel basket (tumbler), contact factory.
** Felt collar is not included and must be ordered separately.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
45
AD-30 Drop Lint Door Assembly
Illus. No.
Part No.
Qty.
1
160001
160103
800150
160200
160003
160104
160008
160009
150425
1
1
1
1
1
1
1
1
1
157000
800216*
1
1
800233*
1
800240
150201
117600
117603
180210
150419
150418
108120
1
10
7
3
2
2
1
1
2
3
4
5
6
7
8
9
10
*
Description
AD-100 Lock Assembly with Key
AD-100 Key ONLY
Knob Latch Kit Assembly (for non-coin models Only)
Knob Latch ONLY with Two (2) Screws (for non-coin models Only)
Dummy Lock ONLY (for non-coin models Only)
MK-100 Key ONLY
Lock Cam For AD-100 Lock
Knob Latch Adjustable Cam (for non-coin models Only)
#12-24 x 3/8” Phillips Round Head Machine Screw
(for knob latch adjustable cam)
Drop Lint Door Spring
AD-30 Drop Lint Door Assembly
(includes illus. nos. 4 through 8)
AD-30 Insulated Drop Lint Door Assembly
(includes illus. nos. 4 through 8)
AD-30 Stainless Steel Drop Lint Door Assembly
#10-32 x 1/4” Phillips Pan Head TEK Screw
Noise Suppressor Tape (sold by the foot)
Suppressor Tape/Gasket (sold by the foot)
AD-30 Trim/Kick Plate (31-1/8” length)
#6 x 1/2” Tamperproof TEK Screw
Tamperproof Screw Hand Driver
Chain For Drop Lint Door
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
46
American Dryer Corporation
AD-50 Drop Lint Door Assembly
88 Currant Road / Fall River, MA 02720-4781
47
AD-50 Drop Lint Door Assembly
Illus. No.
Part No.
Qty.
1
160001
160103
800150
160200
160003
160104
160008
160009
150425
1
1
1
1
1
1
1
1
1
157000
800219*
1
1
800232*
1
800243
150201
117600
117603
180210
150419
150418
108120
1
10
7
3
2
2
1
1
2
3
4
5
6
7
8
9
10
*
Description
AD-100 Lock Assembly with Key
AD-100 Key ONLY
Knob Latch Kit Assembly (for non-coin models Only)
Knob Latch ONLY with Two (2) Screws (for non-coin models Only)
Dummy Lock ONLY (for non-coin models Only)
MK-100 Key ONLY
Lock Cam For AD-100 Lock
Knob Latch Adjustable Cam (for non-coin models Only)
#12-24 x 3/8” Phillips Round Head Machine Screw
(for knob latch adjustable cam)
Drop Lint Door Spring
AD-50 Drop Lint Door Assembly
(includes illus. nos. 4 through 8)
AD-50 Insulated Drop Lint Door Assembly
(includes illus. nos. 4 through 8)
AD-50 Stainless Steel Drop Lint Door Assembly
#10-32 x 1/4” Phillips Pan Head TEK Screw
Noise Suppressor Tape (sold by the foot)
Suppressor Tape/Gasket (sold by the foot)
AD-30 Trim/Kick Plate (31-1/8” length)
#6 x 1/2” Tamperproof TEK Screw
Tamperproof Screw Hand Driver
Chain For Drop Lint Door
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
48
AD-30 Lint Trap Assembly
Illus. No.
Part No.
Qty.
1
800408
1
2
3
4
5
6
7
-
800409
154200
304102
150300
800503
150419
108120
150418
1
7
1
3
1
2
1
1
American Dryer Corporation
Description
AD-30 Lint Trap Assembly Complete
(includes illus. nos. 1, 3, 4, and 5)
AD-30 Lint Trap ONLY
5/32” Pop Rivet
AD-30 Lint Screen Holder ONLY
#10-16 x 1/2” Hex Washer TEK Screw
AD-30 Lint Screen ONLY
#6 x 1/2” Tamperproof TEK Screw
Chain For Drop Lint Door (10-1/2” length)
Tamperproof Screw Hand Driver
88 Currant Road / Fall River, MA 02720-4781
AD-50 Lint Trap Assembly
Illus. No.
Part No.
Qty.
1
800402
1
800404
800407
1
1
800406
154200
304101
150300
800501
150419
108120
150418
1
7
1
3
1
2
1
1
2
3
4
5
6
7
-
Telephone: (508) 678-9000
49
Description
AD-50 Lint Trap Assembly Complete
(includes illus. nos. 1, 3, 4, and 5)
AD-50 Non-Reversing Lint Trap ONLY
AD-50 Reversing Lint Trap Assembly Complete
(includes illus. nos. 1, 3, 4, and 5)
AD-50 Reversing Lint Trap ONLY
5/32” Pop Rivet
AD-50 Lint Screen Holder ONLY
#10-16 x 1/2” Hex Washer TEK Screw
AD-50 Lint Screen ONLY
#6 x 1/2” Tamperproof TEK Screw
Chain For Drop Lint Door
Tamperproof Screw Hand Driver
Fax: (508) 678-9447
50
American Dryer Corporation
AD-30 Basket (Tumbler) Bearing Assembly
88 Currant Road / Fall River, MA 02720-4781
51
AD-30 Basket (Tumbler) Bearing Assembly
Illus. No.
Part No.
Qty.
880203
153005
152005
150508
153005
152005
150600
153004
153005
152005
150501
153002
153001
150621
152004
801101
1
4
4
2
2
2
2
*
2
2
4
4
4
2
2
1
801103
1
801105
801104
880779
1
1
1
880202
19
152004
20
150610
21
101100
22
154301
23
100713
24
100108
25
824807
As required.
1
2
2
1
2
1
1
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
*
Telephone: (508) 678-9000
Description
1-3/8” Flange Bearing with Nylock Setscrew
3/8” Lock Washer
3/8-16 Hex Nut
3/8-16 x 3/4” Hex Head Machine Bolt
3/8” Lock Washer
3/8-16 Hex Nut
3/8-16 x 1-1/2” Hex Head Machine Bolt
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 x 1-1/2” Hex Head Machine Bolt
5/16-18 Hex Nut
1-3/8” Bearing Box Assembly Complete
(includes illus. nos. 4 through 20)
1-3/8” Bearing Box and Support ONLY
(includes illus. nos. 4, 5, 6, 16, and 17)
1-3/8” Bearing Box ONLY
Pillow Block Bearing Support ONLY
1-3/8” Pillow Block Bearing Assembly with Magnet
(for models mfd. with rotational sensor)
1-3/8” Pillow Block Bearing ONLY
5/16-18 Hex Nut
5/16-18 x 1-1/2” Allen Setscrew
18” Pulley
5/16-18 x 1” Allen Setscrew
1/4” x 1/4” x 7/8” Key
5L-680 V-Belt (basket [tumbler] to idler)
Rotational Sensor Assembly
Fax: (508) 678-9447
52
American Dryer Corporation
AD-50 Basket (Tumbler) Bearing Assembly
88 Currant Road / Fall River, MA 02720-4781
53
AD-50 Basket (Tumbler) Bearing Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
*
Part No.
Qty.
880220
153025
152050
150508
153005
152005
150600
153004
153005
152005
150501
153002
153001
150621
152004
801101
1
4
4
2
2
2
2
*
2
2
4
4
4
2
2
1
801103
1
801105
801104
880779
1
1
1
880202
152004
150610
101100
101118
101119
154301
100713
100108
824807
1
2
2
1
1
1
2
1
1
1
Description
1-3/4” Flange Bearing with Nylock Setscrew
9/16” Lock Washer
9/16-12 Hex Nut
3/8-16 x 3/4” Hex Head Machine Bolt
3/8” Lock Washer
3/8-16 Hex Nut
3/8-16 x 1-1/2” Hex Head Machine Bolt
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 x 1-1/2” Hex Head Machine Bolt
5/16-18 Hex Nut
1-3/8” Bearing Box Assembly Complete
(includes illus. nos. 4 through 20)
1-3/8” Bearing Box and Support ONLY
(includes illus. nos. 4, 5, 6, 16, and 17)
1-3/8” Bearing Box ONLY
Pillow Block Bearing Support ONLY
1-3/8” Pillow Block Bearing Assembly with Magnet
(for models mfd. with rotational sensor)
1-3/8” Pillow Block Bearing ONLY
5/16-18 Hex Nut
5/16-18 x 1-1/2” Allen Setscrew
18” Pulley (for non-reversing models Only)
18-3/4” Pulley (for reversing models Only)
1-3/8” Taper Lock Hub (for reversing models Only)
5/16-18 x 1” Allen Setscrew
1/4” x 1/4” x 7/8” Key
5L-680 V-Belt (basket [tumbler] to idler)
Rotational Sensor Assembly
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
54
American Dryer Corporation
AD-30/AD-50 Idler Bearing Assembly
88 Currant Road / Fall River, MA 02720-4781
55
AD-30/AD-50 Idler Bearing Assembly
Illus. No.
Part No.
Qty.
1
100108
1
2
4
5
6
7
8
9
10
11
101129
101140
100110
100112
154301
100705
301850
152002
153007
100214
150521
801007
1
1
1
1
2
1
1
3
3
2
3
1
12
13
14
15
16
17
150617
153005
153004
801009
152004
150509
2
2
2
1
1
1
3
Telephone: (508) 678-9000
Description
5L-680 V-Belt (idler to basket [tumbler]) For Use On AD-30
and AD-50 Models
9” x 2-1/2” Compound Pulley (for use on AD-30 models Only)
14” x 3” Compound Pulley (for use on AD-50 models Only)
4L-500 V-Belt (idler to motor) For Use On AD-30 Models ONLY
4L-610 V-Belt (idler to motor) For Use On AD-50 Models ONLY
5/16-18 x 1” Allen Setscrew
3/16” x 3/16” x 1-3/8” Key
5/8” x 3/4” Idler Shaft
1/4-20 Hex Nut
1/4” Lock Washer
5/8” Flange Bearing
1/4-20 x 2” Carriage Bolt
Idler Bearing Assembly Complete
(includes illus. nos. 5 through 17)
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
Idler Square Washer
5/16-18 Hex Nut
5/16-18 x 3” Hex Head Machine Bolt
Fax: (508) 678-9447
56
AD-30 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
For Models Mfd. with Non-Tapered Ribs ONLY
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
AD-30 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
57
For Models Mfd. with Non-Tapered Ribs ONLY
Illus. No.
Part No.
Qty.
1
2
3
100110
100701
101104
101132
150501
153002
153001
100065
1
1
1
1
4
4
4
1
122701
122801
137030
152004
153002
153001
117600
154000
800908
803938*
8
1
1
4
4
4
4
4
1
1
803883*
1
803809*
1
153050
100604
100702
153050
152006
120200
100004
2
1
1
2
2
1
1
100007
1
4
5
6
7*
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22*
*
Description
4L-500 V-Belt (motor to idler)
3/16” x 3/16” x 1” Key (for use on 3-phase [3ø] models Only)
1/2” x 2” Motor Pulley (for use on 1-phase [1ø] models Only)
5/8” x 2” Motor Pulley (for use on 3-phase [3ø] models Only)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
1/2 HP 100-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor with Plug
Socket Terminal ONLY
Pin/Socket Extraction Tool
8-Pin Housing Connector
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Noise Suppressor Tape (sold by the foot)
5/16-18 Tinnerman Nut
AD-30 Non-Reversing Motor Mount ONLY (56Z frame)
1/2 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Non-Reversing Motor Mount Assembly Complete
(includes illus. nos. 3 through 7 and 13 through 20)
Plug Type Motor
1/2 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Non-Reversing Motor Mount Assembly Complete
(includes illus. nos. 3 through 7 and 13 through 22)
Non-Plug Type Motor
1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Non-Reversing Motor Mount Assembly Complete
(includes illus. nos. 3 through 7 and 13 through 22)
Non-Plug Type Motor
1/2” S.A.E. Flat Washer
12-1/2” Impellor (fan/blower) with 1/2” Bore
1/8” x 1/8” x 1-1/2” Key
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
3/8” x 90° Connector
1/2 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor (56Z frame) Non-Plug Type Motor
1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame) Non-Plug Type Motor
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
58
AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
For Models Mfd. with Non-Tapered Ribs ONLY
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
59
For Models Mfd. with Non-Tapered Ribs ONLY
Illus. No.
Part No.
Qty.
1
2
3
100112
100701
101133
101130
150501
153002
153001
120200
100033*
1
1
1
1
4
4
4
1
1
100034
1
100007*
1
152004
153002
153001
117600
154000
800905
803852*
4
4
4
4
4
1
1
803793*
1
803849*
1
803856*
1
153050
100604
100702
153050
152006
2
1
1
2
2
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
*
Description
4L-610 V-Belt (motor to idler)
3/16” x 3/16” x 1” Key (for use on 3-phase [3ø] models Only)
5/8” x 2-1/4” Motor Pulley (for use on 60 Hz models Only)
5/8” x 2-1/2” Motor Pulley (for use on 50 Hz models Only)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
3/8” x 90° Connector
3/4 HP 120/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor (56Z frame)
3/4 HP 230v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor
(56Z frame)
1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame)
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Noise Suppressor Tape (sold by the foot)
5/16-18 Tinnerman Nut
AD-50 Non-Reversing Motor Mount ONLY (56Z frame)
3/4 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Non-Reversing Motor Mount Assembly Complete
(includes illus. nos. 3 through 8 and 12 through 19)
3/4 HP 230v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Non-Reversing Motor Mount Assembly Complete
(includes illus. nos. 3 through 8 and 1 through 19)
1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Non-Reversing Motor Mount Assembly Complete
(includes illus. nos. 3 through 8 and 12 through 19)
1/2 HP 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Non-Reversing Motor Mount Assembly Complete
(includes illus. nos. 3 through 8 and 12 through 19)
1/2” S.A.E. Flat Washer
12-1/2” Impellor (fan/blower) with 1/2” Bore
1/8” x 1/8” x 1-1/2” Key
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
60
AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
For Models Mfd. with Non-Tapered Ribs ONLY
Illus. No.
Part No.
Qty.
1
2
3
4
5
100112
100701
101133
101130
120200
181003*
1
1
1
1
1
1
6
7
8
150501
153002
153001
4
4
4
American Dryer Corporation
Description
4L-610 V-Belt (motor to idler)
3/16” x 3/16” x 1” Key
5/8” x 2-1/4” Motor Pulley (for use on 60 Hz models Only)
5/8” x 2-1/2” Motor Pulley (for use on 50 Hz models Only)
3/8” x 90° Connector
1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame) Non-Plug Type Motor
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
88 Currant Road / Fall River, MA 02720-4781
AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly (continued)
61
For Models Mfd. with Non-Tapered Ribs ONLY
Illus. No.
Part No.
Qty.
9
100065
1
10
122701
122801
137030
150501
153002
153001
154000
152004
153002
153001
800912
803873*
8
1
1
4
4
4
8
4
4
4
1
1
803869*
1
803940
1
117600
153050
100702
100604
153050
152006
100004*
4
2
1
1
2
2
1
100035
1
120200
1
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
*
Description
1/2 HP 100-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor - Plug Type Motor
Socket Terminal ONLY
Pin/Socket Extraction Tool
8-Pin Housing Connector
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 Tinnerman Nut
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
AD-50 Reversing Motor Mount ONLY
AD-50 1ø 50/60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor Mount Assembly Complete - Plug Type Motor
(includes illus. nos. 2 through 15 and 19 through 25)
AD-50 1ø 60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor Mount Assembly Complete - Non-Plug Type Motor
(includes illus. nos. 2 through 8, 12 through 15, and 19 through 27)
AD-50 3ø 50 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor Mount Assembly Complete - Non-Plug Type Motor
(includes illus. nos. 2 through 8, 12 through 15, and 19 through 27)
Noise Suppressor Tape (sold by the foot)
1/2” S.A.E. Flat Washer
1/8” x 1/8” x 1-1/2” Key
12-1/2” Impellor (fan/blower) with 1/2” Bore
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
1/2 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor (56Z frame) Non-Plug Type Motor
1/2 HP 230v 3ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor
(56Z frame) Non-Plug Type Motor
3/8” x 90° Connector
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
62
AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
For Models Mfd. with Tapered Ribs ONLY
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
AD-50 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
63
For Models Mfd. with Tapered Ribs ONLY
Illus. No.
Part No.
Qty.
1
2
3
100112
100701
101130
101139
150501
153002
153001
120200
100033*
1
1
1
1
4
4
4
1
1
100034
1
100007*
1
152004
153002
153001
117600
154000
800905
803972*
4
4
4
4
4
1
1
803973*
1
803970*
1
803971*
1
153050
100604
100702
153050
152006
2
1
1
2
2
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
*
Description
4L-610 V-Belt (motor to idler)
3/16” x 3/16” x 1” Key (for use on 3-phase [3ø] models Only)
5/8” x 2-1/2” Motor Pulley (for use on 60 Hz models Only)
5/8” x 2-3/4” Motor Pulley (for use on 50 Hz models Only)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
3/8” x 90° Connector
3/4 HP 120/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor (56Z frame)
3/4 HP 230v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor
(56Z frame)
1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame)
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Noise Suppressor Tape (sold by the foot)
5/16-18 Tinnerman Nut
AD-50 Non-Reversing Motor Mount ONLY
3/4 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Non-Reversing Motor Mount Assembly Complete
(includes illus. nos. 3 through 8 and 12 through 19)
3/4 HP 230v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Non-Reversing Motor Mount Assembly Complete
(includes illus. nos. 3 through 8 and 1 through 19)
1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Non-Reversing Motor Mount Assembly Complete
(includes illus. nos. 3 through 8 and 12 through 19)
1/2 HP 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Non-Reversing Motor Mount Assembly Complete
(includes illus. nos. 3 through 8 and 12 through 19)
1/2” S.A.E. Flat Washer
12-1/2” Impellor (fan/blower) with 1/2” Bore
1/8” x 1/8” x 1-1/2” Key
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
64
AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
For Models Mfd. with Tapered Ribs ONLY
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
AD-50 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
65
For Models Mfd. with Tapered Ribs ONLY
Illus. No.
Part No.
Qty.
1
2
3
4
5
100112
100701
101130
101139
120200
181003*
1
1
1
1
1
1
6
7
8
9
150501
153002
153001
100065
4
4
4
1
10
122701
122801
137030
150501
153002
153001
154000
152004
153002
153001
800912
803974*
8
1
1
4
4
4
8
4
4
4
1
1
803977
1
20
21
22
23
24
25
26
117600
153050
100702
100604
153050
152006
100035
4
2
1
1
2
2
1
27
120200
1
11
12
13
14
15
16
17
18
19
*
Description
4L-610 V-Belt (motor to idler)
3/16” x 3/16” x 1” Key
5/8” x 2-1/2” Motor Pulley (for use on 30 Hz models Only)
5/8” x 2-3/4” Motor Pulley (for use on 50 Hz models Only)
3/8” x 90° Connector
1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame) Non-Plug Type Motor
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
1/2 HP 100-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor - Plug Type Motor
Socket Terminal ONLY
Pin/Socket Extraction Tool
8-Pin Housing Connector
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 Tinnerman Nut
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
AD-50 Reversing Motor Mount ONLY
AD-50 1ø 50/60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor Mount Assembly Complete - Plug Type Motor
(includes illus. nos. 2 through 9, 12 through 15, and 19 through 25)
AD-50 3ø 50/60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor Mount Assembly Complete - Non-Plug Type Motor
(includes illus. nos. 2 through 8, 12 through 15, and 19 through 27)
Noise Suppressor Tape (sold by the foot)
1/2” S.A.E. Flat Washer
1/8” x 1/8” x 1-1/2” Key
12-1/2” Impellor (fan/blower) with 1/2” Bore
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
1/2 HP 230v 3ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor
(56Z frame) Non-Plug Type Motor
3/8” x 90° Connector
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
66
Sensor Bracket Assemblies
Microprocessor
Sensor Bracket
Assembly
Non-Computer
Sensor Bracket
Assembly
Illus. No.
Part No.
Qty.
1
880251
1
2
3
4
5
6
7
8
9
10
130301
153010
152000
121028
122701
122605
154007
150000
801425
1
2
2
2
4
1
2
2
1
11
12
13
305007
122604
122700
150301
1
1
4
2
American Dryer Corporation
Description
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 and 5 through 8)
225° Large Manual Reset Thermostat
#6 Star Washer
#6-32 Hex Nut
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
1/4” Tinnerman Push On Fastener
#6-32 x 1/4” Slotted Round Head Machine Screw
Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
88 Currant Road / Fall River, MA 02720-4781
67
Sensor Bracket Assemblies (continued)
Illus. No.
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Part No.
Qty.
Description
150005
130100
130109
130301
130107
130301
130101
153010
152000
840063
840065
121028
122701
122609
122605
831702
*
1
1
1
1
1
1
*
*
1
1
**
***
1
1
1
840062
1
801405
1
801411
1
305007
122608
122604
1
1
122700
122801
150301
***
1
2
#6-32 x 1/4” Phillips Round Head Machine Screw
150° Large Thermostat
140° Large Thermostat (for UniDryer® models Only)
225° Large Manual Reset Thermostat
160° Large Thermostat (for UniDryer® models Only)
225° Large Manual Reset Thermostat (for UniDryer® models Only)
180° Large Thermostat
#6 Star Washer
#6-32 Hex Nut
Sensor Jumper Three (3) ONLY
Sensor Jumper Four (4) ONLY (for UniDryer® models Only)
Insulated Terminal ONLY
Socket Terminal ONLY
3-Pin Socket Connector ONLY
4-Pin Socket Connector ONLY (for UniDryer® models Only)
Sensor Three (3) Bracket Harness Assembly
(includes illus. nos. 22 through 24)
Sensor Four (4) Bracket Harness Assembly
(includes illus. nos. 22 through 24)
For UniDryer® Models ONLY
Non-Computer Sensor Three (3) Bracket Assembly Complete
with Thermostats
(includes illus. nos. 14 through 25)
For Models Mfd. as of August 1, 1993
Non-Computer Sensor Four (4) Bracket Assembly Complete
with Thermostats
(includes illus. nos. 14 through 25)
For UniDryer® Models ONLY
Universal Sensor Bracket ONLY
3-Pin Connector ONLY
4-Pin Connector ONLY
(for UniDryer® models Only)
Pin Terminal ONLY
Pin/Socket Extraction Tool
#8-18 x 7/16” Phillips Pan Head TEK Screw
* Quantity is 4 or 5.
** Quantity is 6 or 8.
*** Quantity is 3 or 4.
Telephone: (508) 678-9000
Fax: (508) 678-9447
68
ADG-30 Standard Non-Hi/Lo Burner Assembly
For Models Mfd. with Globar® Ignition ONLY
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADG-30 Standard Non-Hi/Lo Burner Assembly
69
For Models Mfd. with Globar® Ignition ONLY
Illus. No.
Part No.
Qty.
1*
---------**
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21*
804004
150309
150001
130401
319704
151000
152001
153012
130500
150108
150309
802705
150108
153000
151001
141105
150002
153017
128910
151000
---------
1
2
2
1
1
2
2
1
1
2
2
1
2
2
2
2
1
1
1
2
2
27
28
29
30
---
141206
319501
150301
150309
140004
140402
318700
150309
142809
881367
---------*
1
1
3
2
1
1
2
4
1
1
1
---
410000
1
22
23
24
25
26
Description
ADG-30 Standard Non-Hi/Lo Burner Assembly Complete Less Orifices
(includes illus. nos. 1 through 20 and 22 through 30)
Refer to Globar® Burner Assembly Listing on page 100
Non-Heat Reclaimer Burner Box ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#6-32 x 1/2” Phillips Round Head Machine Screw
330° Hi-Limit
Hi-Limit Mounting Bracket ONLY
#6-32 Pal Nut
#8-32 Hex Nut
#8 Star Washer
Infrared (IR) Sensor ONLY
#8-32 x 1/2” Phillips Pan Head Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Infrared (IR)/Globar® Mounting Bracket ONLY
#8-32 x 1/2” Phillips Pan Head Screw
#8 Steel Burr
#8-32 Pal Nut
Large Burner Tube
#6-32 x 1” Phillips Round Head Machine Screw
#6 Steel Burr
Globar® ONLY
#6-32 Pal Nut
Burner Orifice
(refer to Globar® Burner Orifice Listing on page 100)
3/8” Swage Manifold ONLY
3/8” Gas Valve Mounting Bracket ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
3/8” Globar® (natural gas) Gas Valve
3/8” Valve Liquid Propane (L.P.) Conversion Kit
Pipe Bracket (bent)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/2” x 29-1/8” Pipe
1/2” Union Shutoff with Tail Piece
Conversion Kit
(refer to Globar® Liquid Propane [L.P.] Conversion Kit Listing
on page 100)
3/8” Allen Wrench
* Consult factory for elevations over 2,000 feet.
** Burner orifices are not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
70
ADG-50 Standard Non-Hi/Lo Burner Assembly
For Models Mfd. with Globar® Ignition ONLY
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADG-50 Standard Non-Hi/Lo Burner Assembly
71
For Models Mfd. with Globar® Ignition ONLY
Illus. No.
Part No.
Qty.
1*
---------**
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21*
804004
150309
150001
130401
319704
151000
152001
153012
130500
150108
150309
802705
150108
153000
151001
141105
150002
153017
128910
151000
---------
1
2
2
1
1
2
2
1
1
2
2
1
2
2
2
2
1
1
1
2
2
26
27
28
29
---
141205
318700
150309
140005
140411
318700
150309
142809
881367
---------*
1
1
2
1
1
2
4
1
1
1
---
410001
1
22
23
24
25
Description
ADG-50 Standard Non-Hi/Lo Burner Assembly Complete Less Orifices
(includes illus. nos. 1 through 20 and 22 through 29)
Refer to Globar® Burner Assembly Listing on page 100
Non-Heat Reclaimer Burner Box ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#6-32 x 1/2” Phillips Round Head Machine Screw
330° Hi-Limit
Hi-Limit Mounting Bracket ONLY
#6-32 Pal Nut
#8-32 Hex Nut
#8 Star Washer
Infrared (IR) Sensor ONLY
#8-32 x 1/2” Phillips Pan Head Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Infrared (IR)/Globar® Mounting Bracket ONLY
#8-32 x 1/2” Phillips Pan Head Screw
#8 Steel Burr
#8-32 Pal Nut
Large Burner Tube
#6-32 x 1” Phillips Round Head Machine Screw
#6 Steel Burr
Globar® ONLY
#6-32 Pal Nut
Burner Orifice
(refer to Globar® Burner Orifice Listing on page 100)
1/2” Manifold ONLY (2-port)
Pipe Bracket (bent)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/2” Globar® (natural gas) Gas Valve
1/2” Valve Liquid Propane (L.P.) Conversion Kit
Pipe Bracket (bent)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/2” x 29-1/8” Pipe
1/2” Union Shutoff with Tail Piece
Conversion Kit
(refer to Globar® Liquid Propane [L.P.] Conversion Kit Listing
on page 100)
1/2” Allen Wrench
* Consult factory for elevations over 2,000 feet.
** Burner orifices are not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
72
ADG-30/ADG-50 Hi/Lo Computerized Burner Assembly
For Models Mfd. with Globar® Ignition ONLY
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADG-30/ADG-50 Hi/Lo Computerized Burner Assembly
73
For Models Mfd. with Globar® Ignition ONLY
Illus. No.
Part No.
Qty.
1*
---------**
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21*
804004
150309
150001
130401
319704
151000
152001
153012
130500
150108
150309
802705
150108
153000
151001
141105
150002
153017
128910
151000
---------
1
2
2
1
1
2
2
1
1
2
2
1
2
2
2
2
1
1
1
2
2
26
27
28
29
---
141205
318700
150309
140010
140011
318700
150309
142809
881367
---------*
1
1
2
1
1
2
4
1
1
1
---
410001
1
22
23
24
25
Description
ADG-50 Standard Non-Hi/Lo Burner Assembly Complete Less Orifices
(includes illus. nos. 1 through 20 and 22 through 29)
Refer to Globar® Burner Orifice Listing on page 100
Non-Heat Reclaimer Burner Box ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#6-32 x 1/2” Phillips Round Head Machine Screw
330° Hi-Limit
Hi-Limit Mounting Bracket ONLY
#6-32 Pal Nut
#8-32 Hex Nut
#8 Star Washer
Infrared (IR) Sensor ONLY
#8-32 x 1/2” Phillips Pan Head Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Infrared (IR)/Globar® Mounting Bracket ONLY
#8-32 x 1/2” Phillips Pan Head Screw
#8 Steel Burr
#8-32 Pal Nut
Large Burner Tube
#6-32 x 1” Phillips Round Head Machine Screw
#6 Steel Burr
Globar® ONLY
#6-32 Pal Nut
Burner Orifice
(refer to Globar® Burner Assembly Listing on page 100)
1/2” Manifold ONLY (2-port)
Pipe Bracket (bent)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/2” Hi/Lo Globar® (natural gas) Gas Valve
1/2” Hi/Lo Globar® Liquid Propane (L.P.) Gas Valve
Pipe Bracket (bent)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/2” x 29-1/8” Pipe
1/2” Union Shutoff with Tail Piece
Liquid Propane (L.P.) Conversion Kit
(refer to Globar® Liquid Propane [L.P.] Conversion Kit Listing
on page 100)
1/2” Allen Wrench
* Consult factory for elevations over 2,000 feet.
** Burner orifices are not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
74
ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. with Direct Spark Ignition (DSI) ONLY
Direct Spark Ignition (DSI) module may be mounted on the left outside wall (as shown) or it may be mounted on
the inside of the left side panel.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly
75
For Models Mfd. with Direct Spark Ignition (DSI) ONLY
Illus. No.
Part No.
Qty.
1
2
3
4
318030
150300
150309
128915
880134
1
2
2
1
1
5
6
7
8
9
10*
880330
150103
153000
151001
141105
---------
1
2
2
2
2
2
11
12
13
14
141230
318700
150300
128927
1
1
2
1
140411
880960
1
1
15
16
17
18
19*
881367
142809
150309
318700
---------**
1
1
4
2
1
20
21
22
23
---
850851
850861
880815
150299
319505
150301
---------
1
1
1
4
1
***
1
Description
Direct Spark Ignition (DSI) Burner Shield (2-tube)
#10-16 x 1/2” Hex Washer TEK Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Direct Spark Ignition (DSI) Ignitor/Flame-Probe Assembly
Ignitor/Flame-Probe Kit Assembly
(includes high voltage [HV] wire and connector assembly)
High Voltage (HV) Wire and Connector Assembly
#8-32 x 1/2” Pan Head Machine Screw
#8 Steel Burr
#8-32 Pal Nut
Large Tube Burner ONLY
Burner Orifice
(refer to Direct Spark Ignition [DSI] Burner Orifice Listing
on page 101)
1/2” Direct Spark Ignition (DSI) Manifold (2-port)
Pipe Bracket (bent)
#10-16 x 1/2” Hex Washer TEK Screw
1/2” Direct Spark Ignition (DSI) 24 VAC Redundant (natural gas)
Gas Valve
1/2” Valve Liquid Propane (L.P.) Conversion Kit
1/2” Direct Spark Ignition (DSI) Gas Valve/Liquid Propane (L.P.)
Conversion Kit Combination
1/2” Union Shutoff with Tail Piece
1/2” x 29-1/8” Pipe
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Pipe Bracket (bent)
Direct Spark Ignition (DSI) Burner Assembly Complete Less Orifices
(includes illus. nos. 1 through 9 and 11 through 23)
Refer to Direct Spark Ignition (DSI) Burner Assembly Listing
on page 101
Non-Heat Reclaimer Burner Box ONLY
Heat Reclaimer Burner Box ONLY
ADC Direct Spark Ignition (DSI) Module ONLY (50/60 Hz)
#10 x 1” Hex Washer TEK Screw
Direct Spark Ignition (DSI) Module Mounting Bracket ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Conversion Kit
(refer to Direct Spark Ignition [DSI] Liquid Propane [L.P.]
Conversion Kit Listing on page 101)
* Consult factory for elevations over 2,000 feet.
** Burner orifices are not included and must be ordered separately.
*** As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
76
ADE-30/ADE-50 Electric Oven Assembly
For Models Mfd. as of November 12, 1990
ELECTRIC OVEN (FRONT VIEW)
ELECTRIC OVEN (REAR VIEW)
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
77
ADE-30/ADE-50 Electric Oven Assembly
For Models Mfd. as of November 12, 1990
Illus. No.
Part No.
Qty.
1
803005
---------*
---------*
150300
802800
802801
1
1
2
1
1
154004
150309
802799
122200
150303
105500
319202
154002
150300
803100
320611
150207
130400
150300
154001
121012
152014
---------*
---------*
120081
120080
152008
121011*
---------*
153009
320301
150207
1
2
1
1
2
1
1
1
2
1
1
2
1
2
2
1
3
1
1
1
2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
*
Description
Large Electric Oven Box ONLY
Electric Oven Assembly Complete
Electric Element
#10-16 x 1/2” Hex Washer TEK Screw
Sail Switch Box with Bracket and Cover ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 4 through 12)
Twin Speed Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch Box Cover and Bracket ONLY
Sail Switch ONLY
#4 x 3/4” Phillips Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
#10-16 x 1/2” Hex Washer TEK Screw
Electric Oven Front Cover ONLY
Large Relay Box Cover ONLY
#10-24 x 1/2” Phillips Pan Head Machine Screw
290° Hi-Limit
#10-16 x 1/2” Hex Washer TEK Screw
#10-24 Speed Nut
L-70 Ground Lug
1/4-20 Free Spin Wash Nut
Oven Relay
Oven Relay Replacement Coil
Internal Ceramic Insulator (2 per element)
External Ceramic Insulator (2 per element)
#10-32 Hex Nut (4 per element)
Bus Bar (sold by the foot)
Terminal Lug
#10 Star Washer (2 per element)
Large Electric Oven Right Side Cover ONLY
#10-24 x 1/2” Phillips Pan Head Machine Screw
Refer to ADE-30/ADE-50 Electric Oven Component Application Charts on page 102.
Telephone: (508) 678-9000
Fax: (508) 678-9447
78
ADE-30/ADE-50 Electric Oven Assembly
For Models Mfd. prior to November 12, 1990
ELECTRIC OVEN (FRONT VIEW)
ELECTRIC OVEN (REAR VIEW)
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
79
ADE-30/ADE-50 Electric Oven Assembly
For Models Mfd. prior to November 12, 1990
Illus. No.
Part No.
Qty.
1
803001
---------*
---------*
150300
802800
802801
1
1
2
1
1
154004
150309
802799
122200
150303
105500
319202
154002
150300
803100
320611
150207
130400
150300
154001
150103
120704
154001
152001
121012
152014
---------*
---------*
120081
120080
152008
121011*
---------*
153009
320301
150207
1
2
1
1
2
1
1
1
2
1
1
2
1
2
2
2
-*
2
2
1
3
1
1
1
2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
*
Description
Large Electric Oven Box ONLY
Electric Oven Assembly Complete
Electric Element
#10-16 x 1/2” Hex Washer TEK Screw
Sail Switch Box with Bracket and Cover ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 4 through 12)
Twin Speed Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch Box Cover and Bracket ONLY
Sail Switch ONLY
#4 x 3/4” Phillips Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
#10-16 x 1/2” Hex Washer TEK Screw
Electric Oven Front Cover ONLY
Large Relay Box Cover ONLY
#10-24 x 1/2” Phillips Pan Head Machine Screw
290° Hi-Limit
#10-16 x 1/2” Hex Washer TEK Screw
#10-24 Speed Nut
#8-32 x 3/4” Phillips Round Head Machine Screw
Terminal Block
#10-24 Speed Nut
#8-32 Hex Nut
L-70 Ground Lug
1/4-20 Free Spin Wash Nut
Oven Relay
Oven Relay Replacement Coil
Internal Ceramic Insulator (2 per element)
External Ceramic Insulator (2 per element)
#10-32 Hex Nut (4 per element)
Bus Bar (sold by the foot)
Terminal Lug
#10 Star Washer (2 per element)
Large Electric Oven Right Side Cover ONLY
#10-24 x 1/2” Phillips Pan Head Machine Screw
Refer to ADE-30/ADE-50 Electric Oven Component Application Charts on page 103.
Telephone: (508) 678-9000
Fax: (508) 678-9447
80
ADG-30/ADG-50 Sail Switch/Hi-Limit Assemblies
For Globar® Models and Direct Spark Ignition (DSI) Models ONLY
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
154004
150309
802799
150303
122200
105500
319202
154002
802800
802801
1
2
1
2
1
1
1
1
1
1
10
11
12
13
14
15
142809
150309
319704
151000
150001
130401
1
2
1
2
2
1
American Dryer Corporation
Description
Twin Speed Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch Box Cover and Bracket ONLY
#4 x 3/4” Phillips Pan Head “A” Machine Screw
Sail Switch ONLY
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
Sail Switch Box with Cover and Bracket ONLY
Sail Switch Assembly Complete
(includes illus. nos. 1 through 8)
1/2” x 29-1/8” Pipe
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Hi-Limit Mounting Bracket ONLY
#6-32 Pal Nut
#6-32 x 1/2” Phillips Round Head Machine Screw
330° Hi-Limit ONLY
88 Currant Road / Fall River, MA 02720-4781
ADG-30/ADG-50 Replacement Coils For 3/8” Non-Hi/Lo Gas Valve
81
For Globar® Ignition Models ONLY
Illus. No.
Part No.
Qty.
1
2
3
140111
140112
140110
1
1
1
Telephone: (508) 678-9000
Description
Holding Coil
Booster Coil
Secondary Coil
Fax: (508) 678-9447
82
ADG-30/ADG-50 Replacement Coils For 3/8” Hi/Lo Gas Valve
For Globar® Ignition Models ONLY
Illus. No.
Part No.
Qty.
1
2
3
4
140116
140115
140117
140118
1
1
1
1
American Dryer Corporation
Description
Holding Coil
Booster Coil
Secondary Coil
Hi/Lo Coil
88 Currant Road / Fall River, MA 02720-4781
83
Microprocessor Reversing Rear Control Box Assembly
For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
150301
322808
137060
137013
153002
152004
150108
132425
6
1
1
4
2
2
2
1
132427
1
151001
322807
150108
132426
2
1
2
1
132427
2
151001
2
9
10
11
12
13
Telephone: (508) 678-9000
Description
#8-18 x 7/16” Phillips Pan Head TEK Screw
Control Box Cover Plate ONLY (12” x 8-1/2”)
Arc Suppressor (A.S.) Board Three (3)
Nylon Standoff
5/16” Lock Washer
5/16-18 Hex Nut
#8-32 x 1/2” Phillips Pan Head Machine Screw
Impellor (blower/fan) Contactor
(for 208/230/240 volt - 50/60 Hz models Only)
Impellor (blower/fan) Contactor Replacement Coil
(for 208/230/240 volt - 50/60 Hz models Only)
#8-32 Pal Nut
Contactor Mounting Panel ONLY
#8-32 x 1/2” Phillips Pan Head Machine Screw
Reversing Contactor
(for 208/230/240 volt - 50/60 Hz models Only)
Reversing Contactor Replacement Coil
(for 208/230/240 volt - 50/60 Hz models Only)
#8-32 Pal Nut
Fax: (508) 678-9447
84
Dual Timer Reversing Rear Control Box Assembly
For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays
Illus. No.
Part No.
Qty.
1
2
3
4
150301
322808
150108
132200
132202
151001
153002
152004
150108
132425
6
1
2
1
1
2
2
2
2
1
132427
1
151001
322807
150108
132426
2
1
2
1
132427
2
151001
2
5
6
7
8
9
10
11
12
13
14
American Dryer Corporation
Description
#8-18 x 7/16” Phillips Pan Head TEK Screw
Control Box Cover Plate ONLY (12” x 8-1/2”)
#8-32 x 1/2” Phillips Pan Head Machine Screw
Reversing Timer (60 Hz)
Reversing Timer (50 Hz)
#8-32 Pal Nut
5/16” Lock Washer
5/16-18 Hex Nut
#8-32 x 1/2” Phillips Pan Head Machine Screw
Impellor (blower/fan) Contactor
(for 208/230/240 volt - 50/60 Hz models Only)
Impellor (blower/fan) Contactor Replacement Coil
(for 208/230/240 volt - 50/60 Hz models Only)
#8-32 Pal Nut
Contactor Mounting Panel ONLY
#8-32 x 1/2” Phillips Pan Head Machine Screw
Reversing Contactor
(for 208/230/240 volt - 50/60 Hz models Only)
Reversing Contactor Replacement Coil
(for 208/230/240 volt - 50/60 Hz models Only)
#8-32 Pal Nut
88 Currant Road / Fall River, MA 02720-4781
85
Microprocessor Reversing Rear Control Box Assembly
For Models Mfd. with 208 Volt or 230 Volt Controls with Dunco (Struthers-Dunn) Relays
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
150301
322808
137060
137013
153002
152004
150108
132400
6
1
1
4
2
2
2
1
9
10
11
12
151001
322807
150108
132404
2
1
2
1
132401
2
132416
1
132415
2
132407
2
151001
2
13
14
Telephone: (508) 678-9000
Description
#8-18 x 7/16” Phillips Pan Head TEK Screw
Control Box Cover Plate ONLY (12” x 8-1/2”)
Arc Suppressor (A.S.) Board Three (3)
Nylon Standoff
5/16” Lock Washer
5/16-18 Hex Nut
#8-32 x 1/2” Phillips Pan Head Machine Screw
Impellor (blower/fan) Contactor
(for 208 volt models Only)
#8-32 Pal Nut
Contactor Mounting Panel ONLY
#8-32 x 1/2” Phillips Pan Head Machine Screw
Reversing Contactor
(for 208 volt - 60 Hz models Only)
Reversing Contactor
(for 220/230 volt - 60 Hz models Only)
Reversing Contactor Replacement Coil
(for 208 volt - 60 Hz models Only)
Reversing Contactor Replacement Coil
(for 220/230 volt - 60 Hz models Only)
Reversing Contactor Replacement Coil
(for 240 volt - 50 Hz models Only)
#8-32 Pal Nut
Fax: (508) 678-9447
86
Dual Timer Reversing Rear Control Box Assembly
For Models Mfd. with 208 Volt or 230 Volt Controls with Dunco (Struthers-Dunn) Relays
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
150301
322808
150108
132200
132202
151001
153002
152004
150108
132400
6
1
2
1
1
2
2
2
2
1
10
11
12
13
151001
322807
150108
132404
2
1
2
1
132401
2
132416
1
132415
2
132407
2
151001
2
14
15
American Dryer Corporation
Description
#8-18 x 7/16” Phillips Pan Head TEK Screw
Control Box Cover Plate ONLY (12” x 8-1/2”)
#8-32 x 1/2” Phillips Pan Head Machine Screw
Reversing Timer (60 Hz)
Reversing Timer (50 Hz)
#8-32 Pal Nut
5/16” Lock Washer
5/16-18 Hex Nut
#8-32 x 1/2” Phillips Pan Head Machine Screw
Impellor (blower/fan) Contactor
(for 208/230/240 volt - 50/60 Hz models Only)
#8-32 Pal Nut
Contactor Mounting Panel ONLY
#8-32 x 1/2” Phillips Pan Head Machine Screw
Reversing Contactor
(for 208 volt - 60 Hz models Only)
Reversing Contactor
(for 220/230 volt - 60 Hz models Only)
Reversing Contactor Replacement Coil
(for 208 volt - 60 Hz models Only)
Reversing Contactor Replacement Coil
(for 220/230 volt - 60 Hz models Only)
Reversing Contactor Replacement Coil
(for 240 volt - 50 Hz models Only)
#8-32 Pal Nut
88 Currant Road / Fall River, MA 02720-4781
3-Phase (3Ø) Motor, Electric Relay Panel Assembly
87
For Models Mfd. with 208 Volt or 230 Volt Controls with Furnas Relays
Illus. No.
Part No.
Qty.
1
2
3*
4
150309
311913
311921
880662
132400
6
1
1
1
1
5
151001
2
*
Description
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Service Box Cover Plate ONLY (9-7/8” x 4-3/8”)
Service Box Cover Plate ONLY (9-7/8” x 5-3/4”)
Dual RC Suppressor with Tab Receptacle ONLY
Impellor (blower/fan) Contactor
(for 208/230/240 volt - 50/60 Hz models Only)
#8-32 Pal Nut
Used on microprocessor controller (computer) models ONLY.
Telephone: (508) 678-9000
Fax: (508) 678-9447
88
3-Phase (3Ø) Motor, Electric Relay Panel Assembly
For Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays
Illus. No.
Part No.
Qty.
1
2
150309
311913
311921
137015
132425
6
1
1
1
1
132427
1
150108
150300
151001
311920
4
2
4
1
3*
4
5
6
7
8
*
Description
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Service Box Cover Plate ONLY (9-7/8” x 4-3/8”)
Service Box Cover Plate ONLY (9-7/8” x 5-3/4”)
Arc Suppressor (A.S.) Capacitor ONLY
Impellor (blower/fan) Contactor
(for 208/230/240 volt - 50/60 Hz models Only)
Impellor (blower/fan) Contactor Replacement Coil
(for 208/230/240 volt - 50/60 Hz models Only)
#8-32 x 1/2” Phillips Pan Head Machine Screw
#10-16 x 1/2” Hex Washer TEK Screw
#8-32 Pal Nut
3-Phase (3ø) Non-Reversing Contactor Mounting Bracket
Used on microprocessor controller (computer) models ONLY.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
89
Control/Heat Step Down Transformer
For Globar® Models and High Pressure Motorized Steam Valve Models ONLY
Illus. No.
*
Part No.
Qty.
1*
132002
1
2
3
880210
150309
121400
1
2
2
Description
200 Watt Transformer (terminals are not included)
For 120 Volt Models ONLY
Terminal Package for Globar® Transformer
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Universal Bushing
Used on models with 208 volt and 230 volt controls ONLY.
Telephone: (508) 678-9000
Fax: (508) 678-9447
90
American Dryer Corporation
ADS-30 Steam Coil Damper Assembly
88 Currant Road / Fall River, MA 02720-4781
ADS-30 Steam Coil Damper Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
165008
153002
152004
152002
153007
820321
803416
1
6
6
4
4
2
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
153007
152002
115995
102350
151007
152007
100495
323365
152002
153007
100472
143110
100472
100496
143238
100498
150002
153010
152000
330987
152002
153007
100520
4
4
36
1
1
1
1
2
2
2
1
1
1
1
1
1
2
2
2
1
2
2
1
Telephone: (508) 678-9000
91
Description
ADS-30 Steam Coil Assembly
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Damper Hinge Assembly
ADS-30 Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
1/4” Lock Washer
1/4-20 Hex Nut
Steam Damper Gasket (sold by the inch)
Steam Damper Gasket (68-1/2” length)
7/16-20 Stainless Steel Acorn Nut
7/16-20 Hex Nut
1-1/16” x 3” Stroke Piston
Left and Right Piston Support
1/4-20 Hex Nut
1/4” Lock Washer
1/4” x 1/8” Connector
1/4” Tubing (sold by the foot)
1/4” x 1/8” Connector
1/8” Needle Valve
1/8” Close Nipple
3-Way Micro Valve - 24 VAC
#6-32 x 1” Phillips Round Head Machine Screw
#6 Star Washer
#6-32 Hex Nut
Micro Valve Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/8” N.P.T. Silencer (muffler)
Fax: (508) 678-9447
92
American Dryer Corporation
ADS-50 Steam Coil Damper Assembly
88 Currant Road / Fall River, MA 02720-4781
ADS-50 Steam Coil Damper Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
165011
153002
152004
152002
153007
820321
803417
1
6
6
4
4
2
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
153007
152002
115995
102350
151007
152007
100495
323365
152002
153007
100472
143110
100472
100496
143238
100498
150002
153010
152000
330987
152002
153007
100520
4
4
36
1
1
1
1
2
2
2
1
1
1
1
1
1
2
2
2
1
2
2
1
Telephone: (508) 678-9000
93
Description
ADS-50 Steam Coil Assembly
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Damper Hinge Assembly
ADS-50 Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
1/4” Lock Washer
1/4-20 Hex Nut
Steam Damper Gasket (sold by the inch)
Steam Damper Gasket (68-1/2” length)
7/16-20 Stainless Steel Acorn Nut
7/16-20 Hex Nut
1-1/16” x 3” Stroke Piston
Left and Right Piston Support
1/4-20 Hex Nut
1/4” Lock Washer
1/4” x 1/8” Connector
1/4” Tubing (sold by the foot)
1/4” x 1/8” Connector
1/8” Needle Valve
1/8” Close Nipple
3-Way Micro Valve - 24 VAC
#6-32 x 1” Phillips Round Head Machine Screw
#6 Star Washer
#6-32 Hex Nut
Micro Valve Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/8” N.P.T. Silencer (muffler)
Fax: (508) 678-9447
94
ADS-30/ADS-50 Steam Coil/Valve Assembly
For Motorized Type and Solenoid Type Models ONLY
Illus. No.
Part No.
Qty.
1
803500
803501
150300
165002
165003
142711
142713
165107
165102
165103
1
1
6
1
1
1
1
1
1
1
2
3
4
5
American Dryer Corporation
Description
Large Steam Rack (for high pressure Only)
Large Steam Rack (for low pressure Only)
#10-16 x 1/2” Hex Washer TEK Screw
Large Steam Coil (for high pressure Only)
Large Steam Coil (for low pressure Only)
1” Closed Nipple (for high pressure Only)
1-1/4” Closed Nipple (for low pressure Only)
1” Motorized Steam Valve (for high pressure Only)
1-1/4” Solenoid Valve - 120 VAC (for low pressure Only)
1-1/4” Solenoid Valve - 230 VAC (for low pressure Only)
88 Currant Road / Fall River, MA 02720-4781
AD-30/AD-50 Outer Top/Back Guard Assemblies
Illus. No.
Part No.
Qty.
1
312511
312518
312519
150300
121101
121100
801521
152014
880501
103500
1
1
1
7
1
1
1
3
1
4
2
3
4
5
6
7
8
Telephone: (508) 678-9000
95
Description
Outer Top Assembly (for AD-30 gas models and electric models Only)
Outer Top Assembly (for ADG-50 gas models Only)
Outer Top Assembly (for ADE-50 electric models Only)
#10-16 x 1/2” Hex Washer TEK Screw
Junction Box Cover ONLY (for gas models and steam models Only)
Junction Box ONLY (for gas models and steam models Only)
Back Guard Assembly
1/4-20 Free Spin Wash Nut
8” Damper Replacement (for non-heat reclaimer models Only)
Leveling Leg
Fax: (508) 678-9447
96
ADG-30/ADG-50 Heat Reclaimer Assembly
Illus. No.
1
2
3
4
5
6*
7
8
9*
10
11
*
Part No.
Qty.
121101
121100
801521
152014
103500
143513
880502
143509
117505
143501
880502
143509
1
1
1
3
4
1
1
1
2
1
1
1
Description
Junction Box Cover ONLY
Junction Box ONLY
Back Guard Assembly
1/4-20 Free Spin Wash Nut
Leveling Leg
6” x 6” x 5” Tee
6” Replacement Damper Assembly
6” Flexible Duct
Aluminum Duct Tape (sold by the foot)
8” x 6” x 6” Tee
6” Replacement Damper Assembly
6” Flexible Duct
Damper assembly must be purchased separately.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
97
Relay Board Listing
TYP E
OF HEAT
E LECTRIC S ERVICE
V OLTAGE PHASE
WIRE
S ERVICE
RELAY B OARD
P ART NUM BER
C ONTROL V OLTAGE
120 V OLT
208/230 V OLT
GAS
®
Globar Non-Hi/Lo
Globar® Non-Hi/Lo
Globar® Non-Hi/Lo
Globar® Hi/Lo
Globar® Hi/Lo
Globar® Hi/Lo
Direct Spark Ignition (DSI)
Direct Spark Ignition (DSI)
Direct Spark Ignition (DSI)
120
208/230
208/480
120
208/230
208/480
120
208/230
208/480
1ø
1ø
3ø
1ø
1ø
3ø
1ø
1ø
3ø
2
2
3
2
2
3
2
2
3
137077 or 137150
----------------137077 or 137150
137077
137077
137076*
-----------------
--------137079
137079
--------------------------------137151
137078
208/230
208/480
208
380/480
1ø
3ø
3ø
3ø
2
3
4
4
----------------137151
---------
137151
137078*
--------137078*
120
208/230
208/480
120
208/230
208/480
1ø
1ø
3ø
1ø
1ø
3ø
2
2
3
2
2
3
137151
----------------137151
-----------------
--------137151
137078
--------137151
137078
ELECTRIC
15 Kw through 30 Kw
STEAM
Low Pressure
Low Pressure
Low Pressure
High Pressure
High Pressure
High Pressure
*
May also use Part No. 137151 (Solid State Relay [SSR] Board).
IMPORTANT: Check label on relay board to verify correct part number.
NOTE: ADC Part No. 137151 (Solid State Relay [SSR] Board) cannot be used with 3-phase (3ø) motors.
Telephone: (508) 678-9000
Fax: (508) 678-9447
98
Microprocessor Coin Acceptors Listing
NOTE: Coin acceptors listed include optical switch (ADC Part No. 137056).
Single Coin*
ADC Part No.
Nation
125100
125127
125101
125114
125115
125106
125120
125124
125109
125125
125108
125107
125130
125123
125104
125103
125121
125129
125132
125133
U.S. and Canada
Canada
United Kingdom
United Kingdom
United Kingdom
France
France
France
Denmark
Netherlands
Australia
Australia
Australia
New Zealand
Japan
------Singapore
Hong Kong
Description
25¢ Optic Coin Acceptor
$1 Canadian Optic Coin Acceptor
10 New Pence Optic Coin Acceptor
20 New Pence Optic Coin Acceptor
1 Pound Optic Coin Acceptor
1 French Franc Optic Coin Acceptor
2 French Franc Optic Coin Acceptor
5 French Franc Optic Coin Acceptor
1 Danish Krone Optic Coin Acceptor
25¢ Guilder Optic Coin Acceptor
10¢ Australian Optic Coin Acceptor
20¢ Australian Optic Coin Acceptor
$1 Australian Optic Coin Acceptor
50¢ New Zealand Optic Coin Acceptor
100 Yen Optic Coin Acceptor
0.882 Token Optic Coin Acceptor
0.800 Token Optic Coin Acceptor
Muller Token Optic Coin Acceptor
50¢ Singapore Optic Coin Acceptor
$1 Hong Kong Optic Coin Acceptor
Dual Coin*
125116
125128
125112
125110
125111
125113
125122
125117
125131
125126
125118
125105
*
U.S. and Canada
Canada
United Kingdom
United Kingdom
United Kingdom
United Kingdom
France
Denmark
Denmark
Netherlands
Singapore
Japan
10¢/25¢ Dual Optic Coin Acceptor
25¢/$1 Dual Optic Coin Acceptor
10/20 Pence Dual Optic Coin Acceptor
10/50 Pence Dual Optic Coin Acceptor
20/50 Pence Dual Optic Coin Acceptor
1£/20 Pence Dual Optic Coin Acceptor
2/5 Franc Dual Optic Coin Acceptor
1/5 Danish Krone Dual Optic Coin Acceptor
5/10 Danish Krone Dual Optic Coin Acceptor
25¢/1 Guilder Dual Optic Coin Acceptor
20¢/50¢ Singapore Dual Optic Coin Acceptor
50/100 Yen Dual Optic Coin Acceptor
Consult factory for coin acceptors not listed.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Coin Meter Replacement Parts
Illus. No.
Part No.
Qty.
1
125511
125532
125530
125513
125500
125501
125502
125503
125504
125506
125507
125508
125510
115515
115516
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
3
4
Telephone: (508) 678-9000
99
Description
1/60 RPM 120 Volt/60 Hz Meter Motor
1/60 RPM 230 Volt/60 Hz Meter Motor
1/60 RPM 120 Volt/50 Hz Meter Motor
1/30 RPM 230 Volt/50 Hz Meter Motor
2-Point Cam
3-Point Cam
4-Point Cam
5-Point Cam
6-Point Cam
8-Point Cam
9-Point Cam
10-Point Cam
12-Point Cam
Meter Switch “B” with Arm
Meter Switch “A” or “C”
Fax: (508) 678-9447
100
ADG-30/ADG-50 Globar® Burner Assembly Specifications
G LOBAR ® BURNER ORIFICE LISTING*
ADC
M ODEL
NUM BER
ADG-30B
ADG-30B
ADG-30BH
ADG-30BH
ADG-50B
ADG-50B
ADG-50BH
ADG-50BH
DRYER
HEAT
CONTROLS
R ECLAIM ER
Computer
Non-Computer
Computer
Non-Computer
Computer
Non-Computer
Computer
Non-Computer
QTY.
No
No
Yes
Yes
No
No
Yes
Yes
2
2
2
2
2
2
2
2
NATURAL G AS
L IQUID P ROPANE
(L.P.) G AS
D.M.S.
PART N O.
D.M.S.
PART N O.
1/8”
1/8”
#31
#31
#27
#27
#30
#30
140843
140843
140818
140818
140822
140822
140819
140819
#49
#49
#49
#49
#44
#44
#48
#48
140803
140803
140803
140803
140808
140808
140804
140804
* Consult factory for elevations over 2,000 feet.
GLOBAR® B URNER A SSEM BLY L ISTING
ADC
M ODEL
NUM BER
ADG-30B
ADG-30B
ADG-30BH
ADG-30BH
ADG-50B
ADG-50B
ADG-50BH
ADG-50BH
DRYER
CONTROLS
Computer
Non-Computer
Computer
Non-Computer
Computer
Non-Computer
Computer
Non-Computer
RECLAIM ER
NATURAL G AS
P ART NUM BER
L IQUID P ROP ANE
(L.P.) GAS
P ART NUM BER
No
No
Yes
Yes
No
No
Yes
Yes
808702
808702
809591
809541
808703
808703
809593
809542
808802
808802
809601
809546
808803
808803
809603
809547
HEAT
NOTES: 1. Burner assemblies do not include burner orifices. They must be ordered separately.
2. Models with computer controls and optional heat reclaimer systems have Hi/Lo computerized gas
valve system.
3. When ordering burner assemblies, specify model number and if computer or non-computer.
G LOBAR® L IQUID P ROPANE (L.P.) C ONVERSION KIT LISTING*
ADC M ODEL N UM BER
ADG-30B
ADG-30B
ADG-30BH
ADG-30BH
ADG-50B
ADG-50B
ADG-50BH
ADG-50BH
DRYER
C ONTROL S
HEAT
R ECLAIMER
L IQUID P R OP ANE (L.P.) KIT
P ART N UMBER
Computer
Non-Computer
Computer
Non-Computer
Computer
Non-Computer
Computer
Non-Computer
No
No
Yes
Yes
No
No
Yes
Yes
874012
874012
874013
874012
874014
874014
874016
874015
* Consult factory for elevations over 2,000 feet.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly Specifications
101
DIRECT SPARK IGNITION (DSI)
B URNER ORIFICE L ISTING*
ADC
M ODEL
N UMBER
ADG-30D
ADG-30DH
ADG-50D
ADG-50DH
HEAT
R ECLAIM ER
QTY.
No
Yes
No
Yes
L IQUID P ROP ANE
(L.P.) G AS
N ATURAL G AS
D.M.S.
P ART NO.
D.M.S.
PART NO.
#30
1/8”
#21
#26
140819
140843
140827
140823
#46
#49
#40
#43
140806
140803
140854
140809
2
2
2
2
* Consult factory for elevations over 2,000 feet.
DIRECT SP ARK IGNITION (DSI)
BURNER ASSEM BLY L ISTING
ADC
M ODEL
NUM BER
ADG-30D
ADG-30DH
ADG-50D
ADG-50DH
BTU/HR
H EAT
NATURAL GAS
RATING RECLAIM ER P ART N UM BER
100,000
90,000
150,000
130,000
No
Yes
No
Yes
809631
809633
809625
809624
LIQUID P ROP ANE
(L.P.) G AS
P ART NUM BER
809632
809634
809626
809624
NOTES: 1. Burner assemblies do not include burner orifices. They must be ordered separately.
2. When ordering burner assemblies, specify model number and if computer or non-computer.
DIRECT S PARK IGNITION (DSI)
L IQUID P ROPANE (L.P.) CONVERSION KIT LISTING
ADC M ODEL NUM BER
KIT P ART NUM BER
ADG-30D
ADG-30DH
ADG-50D
ADG-50DH
874050
874049
874044
874045
* Consult factory for elevations over 2,000 feet.
Telephone: (508) 678-9000
Fax: (508) 678-9447
102
ADE-30/ADE-50 Electric Oven Component Application Charts
For Models Mfd. as of November 12, 1990
ADE-30
KW
VOLTAGE
PHASE
WIRE
O VEN
ASSEMBLY
PART NO .*
E LEMEN T
Qty.
Kw
RELAY
T ER MINAL L UG B US B AR
O VEN RELAY
PART NO.
C OIL
Part No. Qty. Part No. 121011 Cat. No. Part No. PART NO.
O VEN WIR E
Part No.
Qty. Size
30
208
3ø
3
815105
6
5
120012
6
#6
133200
7
121012
1
FEAG
131309
131811
30
208
3ø
4
815105
6
5
120012
6
#6
133200
7
121012
1
FEAF
131308
131810
30
230
3ø
3
815305
6
5
120013
5
#8
133100
7
121012
1
EEAG
131307
131809
30
416
3ø
3 or 4
815605
6
5
120012
3
#8
133100
4
121010
2
CEAG
131303
131809
30
460/480
3ø
3 or 4
815705
6
5
120013
3
#8
133100
4
121010
2
BEAG
131311
131809
25
380
3ø
3 or 4
815405
6
5
120012
3
#8
133100
4
121010
2
BEAG
131311
131809
24
208
3ø
3
815107
6
4
120010
5
#8
133100
7
121012
1
EEAG
131307
131809
24
208
3ø
4
815107
6
4
120010
5
#8
133100
7
121012
1
EEAF
131306
131808
24
230
3ø
3
815307
6
4
120011
5
#10
133000
7
121010
1
DEAG
131305
131809
24
416
3ø
3 or 4
815604
6
4
120010
3
#8
133100
4
121010
2
BEAG
131311
131809
24
460/480
3ø
3 or 4
815704
6
4
120011
3
#10
133000
4
121010
2
BEAG
131311
131809
20
208
1ø
2
815005
5
4
120010
2
#4
133330
2
121010
2
GEAG
131312
131811
20
230
1ø
2
815205
5
4
120011
2
#4
133330
2
121010
2
FEAG
131309
131811
20
380
3ø
3 or 4
815404
6
4
120010
3
#10
133000
4
121010
2
BEAG
131311
131809
15
208
3ø
3 or 4
815101
3
5
120012
3
#8
133100
4
121010
2
CEAG
131303
131809
15
208
3ø
3
815101
3
5
120012
3
#8
133100
4
121010
2
CEAF
131302
131808
15
230
3ø
3
815301
3
5
120013
3
#8
133100
4
121010
2
BEAG
131311
131809
ADE-50
KW
*
VOLTAGE
PHASE
WIRE
OVEN
A SSEMBLY
PAR T N O.*
E LEMENT
Qty.
Kw
T ERMINAL L UG B US B AR
P ART NO.
Part No. Qty. Part No. 121011
OVEN WIRE
Part No. Qty. Size
RELAY
COIL
Part No. PART NO .
O VEN RELAY
Cat. No.
30
208
3ø
3
815106
6
5
120012
6
#6
133200
7
121010
1
FEAG
131309
131811
30
208
3ø
4
815106
6
5
120012
6
#6
133200
7
121010
1
FEAF
131308
131810
30
230
3ø
3
815306
6
5
120013
5
#8
133100
7
121010
1
EEAG
131307
131809
30
416
3ø
3 or 4
815603
6
5
120012
3
#8
133100
4
121010
2
CEAG
131303
131809
30
460/480
3ø
3 or 4
815703
6
5
120013
3
#8
133100
4
121010
2
BEAG
131311
131809
25
380
3ø
3 or 4
815403
6
5
120012
3
#8
133100
4
121010
2
BEAG
131311
131809
24
208
3ø
3
815104
6
4
120010
5
#8
133100
7
121010
1
EEAG
131307
131809
24
208
3ø
4
815104
6
4
120010
5
#8
133100
7
121010
1
EEAF
131306
131808
24
230
3ø
3
815304
6
4
120011
5
#10
133000
7
121010
1
DEAG
131305
131809
24
416
3ø
3 or 4
815602
6
4
120010
3
#8
133100
4
121010
2
BEAG
131311
131809
24
460/480
3ø
3 or 4
815702
6
4
120011
3
#10
133000
4
121010
2
BEAG
131311
131809
20
208
1ø
2
815003
5
4
120010
2
#4
133300
2
121012
2
GEAG
131312
131811
20
230
1ø
2
815203
5
4
120011
2
#4
133300
2
121012
2
FEAG
131309
131811
20
380
3ø
3 or 4
815402
6
4
120010
3
#10
133000
4
121010
2
BEAG
131311
131809
Oven Assembly Complete does not include Oven Relay (contactor). This item must be ordered separately.
When ordering Oven Assembly Complete, specify 3 or 4 wire when applicable as well as if dryer has
microprocessor controller (computer) or non-microprocessor controls.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
103
ADE-30/ADE-50 Electric Oven Component Application Charts
For Models Mfd. prior to November 12, 1990
ADE-30
KW
VOLTAGE
PHASE
WIRE
O VEN
A SSEMBLY
PART NO .*
ELEMENT
Qty. Kw
RELAY
T ERMIN AL LU G B US B AR
O VEN RELAY
P ART NO.
C OIL
Qty. Size Part No. Qty. Part No. 121011 Cat. No. Part No. P ART NO.
O VEN WIRE
Part No.
30
208
3ø
3
815105
6
5
120012
6
#6
133200
7
121012
1
DEAG
131305
131809
30
208
3ø
4
815105
6
5
120012
6
#6
133200
7
121012
1
DEAF
131304
131808
30
230
3ø
3
815305
6
5
120013
5
#8
133100
7
121012
1
CEAG
131303
131809
30
416
3ø
3 or 4
815605
6
5
120012
3
#8
133100
4
121010
2
CEAG
131303
131809
30
460/480
3ø
3 or 4
815705
6
5
120013
3
#8
133100
4
121010
2
BEAG
131311
131809
25
380
3ø
3 or 4
815405
6
5
120012
3
#8
133100
4
121010
2
BEAG
131311
131809
24
208
3ø
3
815107
6
4
120010
5
#8
133100
7
121012
1
CEAG
131303
131809
24
208
3ø
4
815107
6
4
120010
5
#8
133100
7
121012
1
CEAF
131302
131808
24
230
3ø
3
815307
6
4
120011
5
#10
133000
7
121010
1
BEAG
131311
131809
24
416
3ø
3 or 4
815604
6
4
120010
3
#8
133100
4
121010
2
BEAG
131311
131809
24
460/480
3ø
3 or 4
815704
6
4
120011
3
#10
133000
4
121010
2
BEAG
131311
131809
20
208
1ø
2
815005
5
4
120010
2
#4
133330
2
121010
2
GEAG
131312
131811
20
230
1ø
2
815205
5
4
120011
2
#4
133330
2
121010
2
FEAG
131309
131811
20
380
3ø
3 or 4
815404
6
4
120010
3
#10
133000
4
121010
2
BEAG
131311
131809
15
208
3ø
3
815101
3
5
120012
3
#8
133100
4
121010
2
CEAG
131303
131809
15
208
3ø
4
815101
3
5
120012
3
#8
133100
4
121010
2
CEAF
131302
131808
15
230
3ø
3
815301
3
5
120013
3
#8
133100
4
121010
2
BEAG
131311
131809
ADE-50
KW
VOLTAGE
PHASE
WIRE
OV EN
ASSEMBLY
P ART NO.*
30
208
3ø
3
815106
6
5
120012
6
#6
133200
7
121010
1
30
208
3ø
4
815106
6
5
120012
6
#6
133200
7
121010
30
230
3ø
3
815306
6
5
120013
5
#8
133100
7
121010
30
416
3ø
3 or 4
815603
6
5
120012
3
#8
133100
4
121010
*
E LEMEN T
Qty. Kw
Part No.
RELAY
T ERMIN AL L U G B US BA R
OVEN R ELA Y
PAR T N O.
C OIL
Part No. Qty. Part No. 121011 Cat. No. Part No. P ART NO.
OVEN WIRE
Qty. Size
FEAG
131305
131809
1
FEAF
131304
131808
1
EEAG
131303
131809
-
CEAG
131303
131809
30
460/480
3ø
3 or 4
815703
6
5
120013
3
#8
133100
4
121010
-
BEAG
131311
131809
25
380
3ø
3 or 4
815403
6
5
120012
3
#8
133100
4
121010
-
BEAG
131311
131809
24
208
3ø
3
815104
6
4
120010
5
#8
133100
7
121010
1
EEAG
131303
131809
24
208
3ø
4
815104
6
4
120010
5
#8
133100
7
121010
1
EEAF
131302
131809
24
230
3ø
3
815304
6
4
120011
5
#10
133000
7
121010
1
BEAG
131311
131809
24
416
3ø
3 or 4
815602
6
4
120010
3
#8
133100
4
121010
-
BEAG
131311
131809
131809
24
460/480
3ø
3 or 4
815702
6
4
120011
3
#10
133000
4
121010
-
BEAG
131311
20
208
1ø
2
815003
5
4
120010
2
#4
133300
2
121012
-
GEAG
131312
131811
20
230
1ø
2
815203
5
4
120011
2
#4
133300
2
121012
-
FEAG
131309
131811
20
380
3ø
3 or 4
815402
6
4
120010
3
#10
133000
4
121010
-
BEAG
131311
131809
Oven Assembly Complete does not include Oven Relay (contactor). This item must be ordered separately.
When ordering Oven Assembly Complete, specify 3 or 4 wire when applicable as well as if dryer has
microprocessor controller (computer) or non-microprocessor controls.
Telephone: (508) 678-9000
Fax: (508) 678-9447
104
Additional Parts Available
Part No.
Description
112039
112090
112280
112530
112531
114001
114006
120100
120200
120300
120400
120500
120600
120707
120708
120800
120802
120902
120903
121014
121026
121499
121500
121503
122804
404500
404502
404506
404507
880200
“Black/White/Green Ground” Label
“Phase 4 OPL Program Location Summary” Label
“Clean Lint Screen” Label
“Coin Program Location Summary” Label
“Phase 3 OPL Program Location Summary” Label
“CAUTION - Exhaust/Lint Screen” Label
“WARNING - Fire Hazards” Label
3/8” Straight (BX) Connector
3/8” x 90° (BX) Connector
3/8” x 45° (BX) Connector
3/8” Red Jacket (BX) Insulator
3/8” Jiffy Clip (BX retainer clip)
3/8” Greenfield (BX)
2-Position Terminal Strip
3-Position Terminal Strip
1/4” In-Line Connector
Red Butt Connector
#74B Wire Nut
Closed End Connector
1/4” Insulated (female) Terminal
Tab Receptacle Combination
5-1/2” Harness Tie
7” Harness Tie
Harness Tie Mounting Clip
Manometer (hydro gauge) For Measuring Gas Pressure
Almond Brush-In-Cap Bottle Touch-Up Paint
White Brush-In-Cap Bottle Touch-Up Paint
Almond “B” Brush-In-Cap Bottle Touch-Up Paint
Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
Electrical Terminal (assortment) Kit
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADC 450096
1- 01/28/92-100
4* 03/21/94-100
7* 12/27/00-25
2- 05/07/92-200
5- 01/24/95-200
3- 10/19/92-200
6* 05/28/97-200
Download PDF
Similar pages