LANCOM L-822acn dual Wireless

Wireless LAN
LANCOM L-822acn dual Wireless
Dual-radio enterprise-class 11ac WLAN access point with up
to 867 Mbps
The LANCOM L-822acn dual Wireless is a high-performance 11ac WLAN enterprise-class access point. It provides
fast WLAN to 11n clients in the 2.4-GHz frequency band and also to the increasing number of modern
11ac-enabled devices in the 5-GHz band. It offers wireless freedom for virtually every industry and application.
a Dual concurrent WLAN – parallel operation at 2.4 and 5 GHz with up to 867 Mbps with IEEE 802.11ac and
300 Mbps with IEEE 802.11n
a Dynamic WLAN optimization thanks to LANCOM Active Radio Control (ARC)
a Powerful WLAN diagnostics with Spectral Scan
a Professional security features such as IEEE 802.1X
a Zero-touch deployment with a LANCOM WLAN controller or LSR
a Easy and secure integration of external users with the Public Spot Option
DATASHEET
LANCOM L-822acn dual Wireless
Dual concurrent WLAN with up to 867 Mbps
Support for zero-touch deployment
The LANCOM L-822acn dual Wireless offers one wireless
By supporting zero-touch deployment, the LANCOM
radio module for 11ac WLAN and another for 11n WLAN.
L-822acn dual Wireless is quickly and easily integrated and
This provides fast WLAN to 11n clients in the 2.4-GHz
configured without having to access the configuration UI.
frequency band and also the increasing number of modern
In installations operated by a WLAN controller or LSR the
11ac-enabled devices in the 5-GHz band.
access
point
receives
an
appropriate
configuration
immediately after network authentication.
Dynamic radio-field optimization from Active Radio
Control
Secure integration of external users
The LANCOM L-822acn dual Wireless supports the WLAN
In combination with the LANCOM Public Spot Option, the
optimization concept LANCOM Active Radio Control. This
LANCOM L-822acn dual Wireless is ideal for operating
intelligent combination of innovative features included with
hotspots. Users benefits from a hotspot that is secure and
the LCOS operating system – such as Band Steering, Adaptive
easy-to-use, while hotspot operators can be sure that their
Noise Immunity, Adaptive RF Optimization, Airtime Fariness
own network remains separate from the hotspot.
and Client Steering – sustainably increases WLAN
performance and supports administrators with professional
Maximum future-proofing
tools for WLAN management.
In combination with the LANCOM Public Spot Option, the
LANCOM L-822acn dual Wireless is ideal for operating
Powerful WLAN diagnostics with Spectral Scan
hotspots. Users benefits from a hotspot that is secure and
The LANCOM L-822acn dual Wireless uses the Spectral Scan
easy-to-use, while hotspot operators can be sure that their
to search the surrounding radio field for sources of
own network remains separate from the hotspot.
interference. This professional tool for efficient WLAN
troubleshooting is a combination of hardware and software
features. It identifies and graphically represents sources of
interference, so helping the administrator to initiate
countermeasures.
LANCOM security for wireless networks
With numerous integrated security features, such as IEEE
802.1X, this enterprise-class access point provides optimal
security for networks. As a result, employees and visitors all
benefit from security policies in the network.
DATASHEET
LANCOM L-822acn dual Wireless
LCOS 9.18
WLAN Product Specifications
Frequency band 2.4 GHz or 5 GHz
2400-2483.5 MHz (ISM) or 5150-5825 MHz (depending on country-specific restrictions)
Data rates IEEE 802.11ac/n
867 Mbps according to IEEE 802.11ac with MCS9 (Fallback to 6,5 Mbps with MCS0). Compatible to IEEE 802.11 ac/n/a, IEEE 802.11
ac/n, IEEE 802.11 n/a or pure IEEE 802.11ac, pure IEEE 802.11n, pure IEEE 802.11a and data rates selectable
Data rates IEEE 802.11n
300 Mbps according to IEEE 802.11n with MCS15 (Fallback to 6,5 Mbps with MCS0). Compatible to IEEE 802.11a/n, IEEE 802.11g/n,
IEEE 802.11b/g/n and IEEE 802.11b/g compatibility mode or pure IEEE 802.11n, pure IEEE 802.11a, IEEE 802.11g or pure IEEE 802.11b
mode and data rates selectable
Data rates IEEE 802.11a/ h
54 Mbps (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection), fully compatible with TPC (adjustable power output)
and DFS (automatic channel selection, radar detection) and data rates selectable
Data rates IEEE 802.11b/g
54 Mbps to IEEE 802.11g (fallback to 48, 36, 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection) compatible to IEEE 802.11b (11, 5.5,
2, 1 Mbps, Automatic Rate Selection), IEEE 802.11 b/g compatibility mode or pure IEEE802.11g or pure IEEE802.11b and data rates
selectable
Range IEEE 802.11a/b/g *
Up to 150 m (up to 30 m in buildings)
Output power at radio module WLAN-1, 5 IEEE 802.11a/h: +17 up to +18 dBm @ 6 up to 48 Mbps, +13 up to +15 dBm @ 54 Mbps, IEEE 802.11n: +17 up to +18 dBm @
GHz
(MCS0/8/16, 20 MHz), +11 up to +13 dBm @ (MCS7/15/23, 20 MHz), +16 up to +17 dBm @ (MCS0/8/16, 40 MHz), +9 up to +12 dBm
@ (MCS7/15/23, 40 MHz)
Output power at radio module WLAN-2, 5 IEEE 802.11a/h: +18 dBm @ 6 up to 48 MBit/s and +16 dBm @ 54 MBit/s IEEE 802.11ac: +16 up to +18 dBm @ (MCS0-7, 20/40/80
GHz
MHz), +14 dBm @ (MCS8, 20/40/80 MHz), +14 dBm @ (MCS9, 40/80 MHz)
Output power at radio module WLAN-1,
2.4 GHz
IEEE 802.11b: +22 dBm @ 1 and 2 Mbps, +22 dBm @ 5,5 and 11 Mbps, IEEE 802.11g: +22 dBm @ 6 up to 36 Mbps, +20 dBm @ 48
Mbps, +18 dBm @ 54 Mbps, IEEE 802.11n: +22 dBm @ (MCS0/8/16, 20 MHz), +16 dBm @ (MCS7/15/23, 20 MHz), +21 dBm @
(MCS0/8/16, 40 MHz), +15 dBm @ (MCS7/15/23, 40 MHz)
Max. radiated power (EIRP), 2.4 GHz band IEEE 802.11b/g: Up to 20 dBm / 100 mW EIRP (transmission power control according to TPC)
Max. radiated power (EIRP), 5 GHz band
IEEE 802.11a/h: Up to 30 dBm / 1000 mW EIRP (depending on national regulations on channel usage and subject to further obligations
such as TPC and DFS)
Minimum transmission power
Transmission power reduction in software in 1 dB steps to min. 0.5 dBm
Receiver sensitivity WLAN-1, 5 GHz
IEEE 802.11a/h: -98 dBm @ 6 Mbps, -81 dBm @ 54 Mbps, IEEE 802.11n: -94 dBm @ (MCS0, 20 MHz), -76dBm @ (MCS 7, 20 MHz),
-92 dBm @ (MCS0, 40 MHz), -72 dBm @ (MCS7, 40 MHz)
Receiver sensitivity WLAN-2, 5 GHz
IEEE 802.11a/h: -95 dBm @ 6 MBit/s, -76 dBm @ 54MBit/s, IEEE 802.11ac: -94 dBm @ MCS0 20 MHz, -76 dBm @ MCS7 20 MHz, -72
dBm @ MCS8 20 MHz, -92 dBm @ MCS0 40 MHz, -76 dBm @ MCS7 40 MHz, -71 dBm @ MCS8 40 MHz, -70 dBm @ MCS9 40 MHz,
-90 dBm @ MCS0 80 MHz, -72 dBm @ MCS7 80 MHz, -68 dBm @ MCS8 80 MHz, -67 dBm @ MCS9 80 MHz
Receiver sensitivity WLAN-1, 2.4 GHz
IEEE 802.11b: -97 dBm @ 1 MBit/s, -93 dBm @ 11 MBit/s, IEEE 802.11g: -95dBm @ 6 MBit/s, -81dBm @ 54 MBit/s IEEE 802.11n: -94
dBm @ 6,5MBit/s (MCS0, 20 MHz), -77 dBm @ 65 MBit/s (MCS7, 20 MHz), -91 dBm @ 15 MBit/s (MCS0, 40 MHz), -74 dBm @ 150
MBit/s (MCS7, 40 MHz)
Radio channels 2.4 GHz
Up to 13 channels, max. 3 non-overlapping (depending on country-specific restrictions)
Radio channels 5 GHz
Up to 26 non-overlapping channels (available channels and further obligations such as automatic DFS dynamic channel selection
depending on national regulations)
Multi-SSID
Up to 31 (Simultaneous use of up to 16 independent WLAN networks at WLAN interface 1 and up to 15 independent WLAN networks
at WLAN interface 2.
Concurrent WLAN clients
Up to 200 clients (recommended), 512 clients (max.)**
Others
Wireless Quality Indicators (WQI)
*) Note
The effective distances and transmission rates that can be achieved are depending of the site RF conditions
**) Note
The 11ac WLAN module supports max. 128 clients, this specification refers to the combination with the 11n radio module.
Supported WLAN standards
IEEE standards
IEEE 802.11ac, IEEE 802.11n, IEEE 802.11a, IEEE 802.11g, IEEE 802.11b, IEEE 802.11i, IEEE 802.1X, IEEE 802.11u, IEEE 802.11r (Fast
Roaming), IEEE 802.11w (Protected Management Frames), WME and U-APSD/WMM Power Save as defined in IEEE 802.11e, IEEE
802.11h, IEEE 802.11d
Standard IEEE 802.11ac
Supported features
2x2 MIMO, 80 MHz channels, QAM-256
DATASHEET
LANCOM L-822acn dual Wireless
LCOS 9.18
Standard IEEE 802.11n
Supported features
2x2 MIMO, 40-MHz channel, 20/40MHz coexistence mechanisms in the 2.4GHz Band, MAC aggregation, Block Acknowledgement,
STBC (Space Time Block Coding), LDPC (Low Density Parity Check), MRC (Maximal Ratio Combining), Short Guard Interval
WLAN operating modes
Modes
WLAN Access Point (standalone, WLC or Lightweight Controller architektur managed), WLAN Bridge (P2P or P2MP) (standalone or
AutoWDS*), (standalone, WLC or Lightweight Controller architektur managed), WLAN client mode, transparent WLAN client mode
Security
Encryption options
IEEE 802.1X (WPA2-Enterprise), IEEE 802.11i (WPA2-Personal), Wi-Fi Certified™ WPA2™, WPA, WEP, IEEE 802.11w (Protected
Management Frames), LEPS (LANCOM Enhanced Passphrase Security)
Encryption
AES:CCMP (Advanced Encryption Standard with Counter Mode and Cipher Block Chaining Message Authentication Code Protocol),
TKIP (Temporal Key Integrity Protocol), RC4 (only used by WEP)
EAP types (authenticator)
EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-AKA Prime, EAP-FAST
RADIUS/EAP-server
User administration MAC based, rate limiting, passphrases, VLAN user based, authentication of IEEE 802.1X clients via EAP-TLS,
EAP-TTLS, EAP-MD5, EAP-GTC, PEAP, MSCHAP or MSCHAPv2
Others
WLAN protocol filters, IP-redirection of any packet received over the WLAN interface, IEEE 802.1X supplicant, background scanning,
client detection ("rogue wlan client detection"), Wireless Intrusion Detection System (WIDS)
LANCOM Active Radio Control
Client Steering*
Steering of WLAN clients to the ideal access point
Band Steering
Steering of 5GHz clients to the corresponding high-performance frequency band
Managed RF Optimization*
Selection of optimal WLAN channels by the administrator
Adaptive Noise Immunity
Better WLAN throughput due to immunity against interferences
Spectral Scan
Monitoring your WLAN for sources of interference
Adaptive RF Optimization
Dynamic selection of the optimal WLAN channel
Airtime Fairness
Improved utilization of the WLAN bandwidth
*) Note
Only in installations with WLAN controller
Roaming
Roaming
IAPP (Inter Access Point Protocol), IEEE 802.11r (Fast Roaming), OKC (Opportunistic Key Caching), Fast Client Roaming (only in operating
mode client modus)
Layer 2 features
VLAN
4.096 IDs based on IEEE 802.1q, dynamische assignment, Q-in-Q tagging
Quality of Service
WME based on IEEE 802.11e, Wi-Fi Certified™ WMM®
Rate limiting
SSID based, WLAN client based
Multicast
IGMP-Snooping
Protocols
Ethernet over GRE-Tunnel (EoGRE), ARP-Lookup, LLDP, DHCP option 82, IPv6-Router-Advertisement-Snooping, DHCPv6-Snooping,
LDRA (Lightweight DHCPv6 Relay Agent), Spanning Tree, Rapid Spanning Tree, ARP, Proxy ARP, BOOTP, DHCP
Layer 3 features
Firewall
Stateful inspection firewall including paketfiltering, extended port forwarding, N:N IP address mapping, paket tagging, user-defined
rules and notifications
Quality of Service
Traffic shaping, Bandwidth reservation, DiffServ/TOS, Packet-size control, Layer 2-in-Layer 3-Tagging
Security
Intrusion Prevention, IP spoofing, Access control lists, Denial of Service protection, detailed settings for handling reassembly,
session-recovery, PING, stealth mode and AUTH port, URL blocker, Password protection, programmable reset button
PPP authentication mechanisms
PAP, CHAP, MS-CHAP and MS-CHAPv2
High availability / redundancy
VRRP (Virtual Router Redundancy Protocol), analog/GSM modem backup
Router
IPv4-, IPv6-, NetBIOS/IP multiprotokoll router, IPv4/IPv6 dual stack
Router virtualisation
ARF (Advanced Routing and Forwarding) up to separate processing of 16 contexts
DATASHEET
LANCOM L-822acn dual Wireless
LCOS 9.18
Layer 3 features
IPv4 services
HTTP and HTTPS server for configuration by web interface, DNS client, DNS server, DNS relay, DNS proxy, dynamic DNS client, DHCP
client, DHCP relay and DHCP server including autodetection, NetBIOS/IP proxy, NTP client, SNTP server, policy-based routing
IPv6 services
DHCPv6 client, DHCPv6 server, DHCPv6 relay
IPv6 compatible LCOS applications
WEBconfig, HTTP, HTTPS, SSH, Telnet, DNS, TFTP, Firewall, RAS dial-in
Dynamic routing protocol
RIPv2
IPv4 protocols
DNS, HTTP, HTTPS, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RADSEC (secure RADIUS), RTP, SNMP, TFTP, TACACS+
IPv6 protocols
NDP, stateless address autoconfiguration (SLAAC), stateful address autoconfiguration (DHCPv6), router advertisements, ICMPv6,
DHCPv6, DNS, HTTP, HTTPS, PPPoE, RADIUS, SMTP
WAN operating mode
VDSL, ADSL1, ADSL2 or ADSL2+ with external ADSL2+ modem at an ETH Port
WAN protocols
PPPoE, Multi-PPPoE, ML-PPP, GRE, EoGRE, PPTP (PAC or PNS), L2TPv2 (LAC or LNS) and IPoE (using DHCP or no DHCP), RIP-1, RIP-2,
VLAN, IPv6 over PPP (IPv6 and IPv4/IPv6 dual stack session), IP(v6)oE (autokonfiguration, DHCPv6 or static)
Tunneling protocols (IPv4/IPv6)
6to4, 6in4, 6rd (static and over DHCP), Dual Stack Lite (IPv4-in-IPv6-Tunnel)
Interfaces
Ethernet ports
2 x 10/100/1000BASE-T Autosensing (RJ-45), PoE (Power over Ethernet) at ETH1
Serial interface
Serial configuration interface / COM port (8 pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional connection of analog/GPRS
modems. Supports internal COM port server and allows for transparent asynchronous transmission of serial data via TCP
External antenna connectors
Four reverse SMA connectors for external LANCOM AirLancer Extender antennas or for antennas from other vendors. Please respect
the restrictions which apply in your country when setting up an antenna system. For information about calculating the correct antenna
setup, please refer to www.lancom-systems.eu
Hardware
Power supply
12 V DC, external power adapter (230 V) with bayonet cap. PoE (Power over Ethernet), compliant with IEEE 802.3af
Environment
Temperature range 0–40°C a vertical mounting position using the LANCOM Wall Mount; Temperature range 0–35°C a horizontal
mounting position; humidity 0–95%; non-condensing; In order to prevent overheating of the device the WLAN modules are deactivated
automatically.
Power consumption (max)
approx. 11 Watts with 12 V/ 1,5 A power supply adapter (total power consumption of access point and power supply adapter), approx.
12 Watts via PoE
Housing
Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; 210 x 45 x 140 mm (W x H x D)
Management and monitoring
Management
LANconfig, WEBconfig, LSR (LANCOM Large Scale Rollout), WLAN-Controller, LANCOM Layer 2 Management (emergency management)
Management funktions
Alternative boot configuration, Voluntary automatic updates for LCMS and LCOS
FirmSafe
Two stored firmware versions, incl. test mode for firmware updates
Monitoring
LANmonitor, WLANmonitor, LSM (LANCOM Large Scale Monitor)
Monitoring funktions
Device SYSLOG, SNMPv2c, Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, internal logging buffer
for firewall events
Monitoring statistics
Extensive Ethernet, IP and DNS statistics; SYSLOG error counter, accounting information exportable via LANmonitor and SYSLOG
Declarations of conformity*
CE
EN 60950-1, EN 301 489-1, EN 301 489-17
Wi-Fi Alliance Certification
Wi-Fi Certified
2.4 GHz WLAN
EN 300 328
5 GHz WLAN
EN 301 893
Medical
Medical conformity with EN 60601-1-2
IPv6
IPv6 Ready Gold
*) Note
You will find all declarations of conformity in the products section of our website at www.lancom-systems.de/en
DATASHEET
LANCOM L-822acn dual Wireless
LCOS 9.18
Manual
Installation Guide (DE/EN/FR/ES/IT/PT/NL)
Cable
1 Ethernet cable, 3 m
Antenna
Four 3 dBi dipole dual-band antennas
Power supply unit
External power adapter (230 V), NEST 12 V/1.5 A DC/S, coaxial power connector 2.1/5.5 mm bayonet, temperature range from -5 to
+45° C, LANCOM item no. 110723 (EU)/LANCOM item no 110829 (UK) (not included in bulk delivery)
Support
Warranty
3 years support via hotline and Internet KnowledgeBase
Software updates
Regular free updates (LCOS operating system and LANCOM Management System) via Internet
Options
Warranty Extension
LANCOM Warranty Basic Option S, item no. 10710
Warranty Extension & Advanced
Replacement
LANCOM Warranty Advanced Option S, item no. 10715
Public Spot
LANCOM Public Spot Option (authentication and accounting software for hotspots, incl. Voucher printing through Standard PC printer),
item no. 60642
Accessories
LANCOM WLC-4006+ (EU/UK/US)
LANCOM WLAN controller for central management of 6 (opt. up to 30) LANCOM access points and WLAN routers, item no. 62035
(EU), item no. 62036 (UK) and item no. 62037 (US)
LANCOM WLC-4025+ (EU/UK/US)
LANCOM WLAN controller for central management of 25 (opt. up to 100) LANCOM access points and WLAN routers, item no. 61378,
item no. Art.-Nr. 61379 and item no. 61384 (US)
LANCOM WLC-4100 (EU/UK)
LANCOM WLAN controller for central management of 100 (opt. up to 1000) LANCOM access points and WLAN routers, item no. 61369
(EU) and item no. 61377 (UK)
External antenna, indoor use
AirLancer Extender I-D180agn (item no. 60917)
External antenna, outdoor use
AirLancer Extender O-D80g (item no. 61221), AirLancer Extender O-D60a (item no. 61222), AirLancer Extender O-D9a (item no. 61224)
Surge arrestor (antenna cable)
AirLancer Extender SA-5L surge arrestor (2.4 and 5 GHz), to be integrated between Access Point and antenna, item no. 61553
Surge arrestor (LAN cable)
AirLancer Extender SA-LAN surge arrestor (LAN cable), item no. 61213
LANCOM Wall Mount
For simple, theft-proof mounting of LANCOM devices with plastic housings, item no. 61349
LANCOM Wall Mount (White)
For simple, theft-proof mounting of LANCOM devices with plastic housings, item no. 61345
Analog modem backup/serial adapter
LANCOM Serial Adapter Kit, item no. 61500
Power over Ethernet Injector
LANCOM GE PoE+ Injector, item no. 61738 (EU) and 61739 (UK)
*) Note
The polarization diversity antennas require 2 cables and surge arrestors
Item number(s)
LANCOM L-822acn dual Wireless (EU/UK)
61743(EU), 61744(UK)
LANCOM L-822acn dual Wireless (Bulk 10) 61753
www.lancom-systems.de
LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Würselen I Deutschland I E-Mail info@lancom-systems.de
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for
technical errors and/or omissions. 09/15
Scope of delivery
Download PDF
Similar pages