Operating Instructions
Colour Laser Multi-Function Printer
Model No.
DP-MC210
Do NOT connect the unit to a computer with the USB cable until prompted by the MultiFunction Station (CD-ROM).
1
2
Designed to be used only in Canada.
L This unit is compatible with Call Display. You must subscribe to the appropriate service
offered by your service provider/telephone company.
Thank you for purchasing a Panasonic MultiFunction Printer.
You can select English or French for the language.
The display and reports will be in the selected language.
The default setting is English. If you want to change the
setting, see feature #110 on page 59.
Caution:
L Do not rub or use an eraser on the printed side of
recording paper, as the print may smear.
Trademarks:
L Microsoft, Windows, Windows Vista and Internet
Explorer are either registered trademarks or
trademarks of Microsoft Corporation in the United
States and/or other countries.
L Pentium is a trademark of Intel Corporation in the
U.S. and other countries.
L Screen shots reprinted with permission from
Microsoft Corporation.
L Adobe and Reader are either registered trademarks
or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
L 3M is a trademark or registered trademark of 3M
Company.
L Avery is a registered trademark of Avery Dennison
Corporation.
L PCL is a trademark of Hewlett-Packard Company.
L SD and the SD logo are trademarks.
L SDHC and the SDHC logo are trademarks.
L miniSD and the miniSD logo are trademarks.
L miniSDHC and the miniSDHC logo are trademarks.
L microSD and the microSD logo are trademarks.
L microSDHC and the microSDHC logo are
trademarks.
L All other trademarks identified herein are the
property of their respective owners.
Copyright:
L This material is copyrighted by Panasonic
Communications Co., Ltd., and may be reproduced
for internal use only. All other reproduction, in whole
or in part, is prohibited without the written consent of
Panasonic Communications Co., Ltd.
© Panasonic Communications Co., Ltd. 2009
2
Important Information
IImportant
1
mportant Information
For your safety
Laser radiation
The printer of this unit utilizes a laser. Use of
controls or adjustments or performance of
procedures other than those specified
herein may result in hazardous radiation
exposure.
Fuser unit
During or immediately after printing, the
fuser unit (1) gets hot. This is normal. Do
not touch the fuser unit.
Note:
L The left side of the unit (2) and the area near the
recording paper exit (3) also get warm. This is
normal.
1
3
2
For best performance
Toner cartridge and drum cartridge
L When replacing the toner cartridge or drum
cartridge, do not allow dust, water, or liquids to come
in contact with the drum. This may affect print quality.
L For optimal performance, genuine Panasonic toner
cartridges and drum cartridges are recommended.
We cannot be responsible for problems that may be
caused by a non-Panasonic toner cartridge or drum
cartridge:
– Damage to the unit
– Poor print quality
– Improper operation
them, open the drum cartridge protection bag. The
drum cartridge contains a photosensitive drum.
Exposing it to light may damage the drum. Once you
have opened the protection bag:
– Do not expose the drum cartridge to light for
more than 45 seconds.
– Do not touch or scratch the green drum surface.
– Do not place the drum cartridge near dust or dirt,
or in a high humidity area.
– Do not expose the drum cartridge to direct
sunlight.
L To extend the life of the drum cartridge, the power
switch should never be turned OFF immediately after
printing. Leave the power turned ON for a minimum
of 30 minutes after printing.
Location
L To avoid malfunction, do not position the unit near
appliances such as TVs or speakers which generate
an intense magnetic field.
Static electricity
L To prevent static electricity damage to the interface
connectors or other electrical components inside the
unit, touch a grounded metal surface before touching
the components.
Environment
L Keep the unit away from electrical noise generating
devices, such as fluorescent lamps and motors.
L The unit should be kept free from dust, high
temperature and vibration.
L The unit should not be exposed to direct sunlight.
L Do not place heavy objects on top of the unit. When
you leave the unit unused for a long period of time,
unplug this unit from the power outlet.
L The unit should be kept away from heat sources such
as heaters, kitchen stoves, etc. Damp basements
should also be avoided.
L In the printing process, heat is used to fuse toner
onto the page. As a result, it is normal for the
machine to produce an odour during and shortly after
printing. Be sure to use this unit in an area with
proper ventilation.
L Do not place any objects within 10 cm (4 inches) of
the right, left and back sides of the unit.
Toner cartridge
L Do not leave the toner cartridge out of the protection
bag for a long time. It will decrease the toner life.
Drum cartridge
L Read the instructions on page 11 before you begin
installation of the drum cartridge. After you have read
3
Important Information
L Do not cover slots or openings on the unit. Inspect
the air circulation vents regularly and remove any
dust build-up with a vacuum cleaner (1).
Approx. 30 kg (67 lb)
1
Routine care
L Wipe the outer surface of the unit with a soft cloth. Do
not use benzine, thinner, or any abrasive powder.
Moving the unit
The unit weighs approximately 30 kg (67 lb). It is highly
recommended that two people handle this unit.
When moving the unit, hold both of the side grips (2).
2
Illegal copies
L It is unlawful to make copies of certain
documents.
Copying certain documents may be illegal in your
country. Penalties of fines and/or imprisonment may
be imposed on those found guilty. The following are
examples of items that may be illegal to copy in your
country.
– Currency
– Bank notes and checks
– Bank and government bonds and securities
– Passports and identification cards
– Copyright material or trademarks without the
consent of the owner
– Postage stamps and other negotiable
instruments
This list is not inclusive and no liability is
assumed for either its completeness or accuracy.
In case of doubt, contact your legal counsel.
Notice:
L Install your machine near a supervised area to
prevent illegal copies from being made.
2
4
Table of Contents
1. Introduction and Installation
1. Table of Contents
Accessories
1.1
1.2
Supplied accessories .................................... 7
Accessory information ................................... 7
Finding the Controls
1.3
1.4
1.5
Button descriptions........................................ 8
Display descriptions ...................................... 9
Overview ..................................................... 10
Installation
1.6
1.7
Toner cartridge and drum cartridge............. 11
Recording paper.......................................... 15
2. Preparation
Connections and Setup
2.1
2.2
2.3
2.4
Connections ................................................ 18
Turning the power switch ON....................... 19
Dialing mode ............................................... 19
Selecting the operation mode (Scan/Copy/Fax/
Print)............................................................ 20
Document Requirements
2.5
Setting the original....................................... 20
Volume
2.6
Adjusting the volume ................................... 22
Initial Programming
2.7
2.8
2.9
2.10
2.11
2.12
Date and time .............................................. 22
Your logo...................................................... 23
Your fax number .......................................... 23
Configuring the unit to access the LAN ....... 24
Installing Multi-Function Station .................. 25
Starting Multi-Function Station .................... 27
3. Printer
Printer
3.1
3.2
3.3
3.4
Printing from Windows applications ............ 29
Direct printing from an SD card ................... 31
Direct printing from an FTP server (LAN
connection only) .......................................... 33
Printing a received e-mail attachment
automatically (LAN connection only) ........... 34
4. Scanner
Scanner
4.1
4.2
Scanning from the unit (Push Scan)............ 35
Scanning from a computer (Pull Scan)........ 38
5. Copier
Copy
5.1
5.2
Making a copy ............................................. 40
More copying features ................................. 42
6. Fax
Sending Faxes
6.1
6.2
6.3
Sending a fax manually ............................... 45
Storing items for the navigator directory...... 46
Sending a fax using navigator directory ...... 47
6.4
6.5
Broadcast transmission................................48
Sending a computer document as a fax
message from your computer ......................49
Receiving Faxes
6.6
Receiving a fax automatically – Auto answer
ON................................................................50
6.7 Receiving a fax manually – Auto answer OFF
.....................................................................50
6.8 Displaying a received fax document.............51
6.9 Using the unit with an answering machine...52
6.10 Junk fax prohibitor (preventing fax reception
from undesired callers).................................53
6.11 Receiving a fax on your computer................54
7. Call Display
Call Display
7.1
7.2
7.3
7.4
Call Display service......................................55
Viewing and calling back using caller
information ...................................................55
Erasing caller information.............................56
Storing caller information .............................56
8. Distinctive Ring
Distinctive Ring
8.1
8.2
8.3
8.4
Distinctive Ring service ................................57
Using two or more phone numbers on a single
telephone line...............................................57
Using three or more phone numbers on a
single telephone line ....................................57
Programming the ring pattern assigned for fax
.....................................................................57
9. Programmable Features
Features Summary
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
Programming................................................58
Basic features ..............................................59
Fax features .................................................62
Copy features ...............................................67
PC print features ..........................................68
Scan features ...............................................71
LAN features ................................................73
Direct print feature........................................75
Network features (LAN connection only)......76
10.Useful Information
Useful Information
10.1
10.2
10.3
10.4
10.5
Character entry ............................................78
Status of the unit ..........................................78
Cancelling the operations.............................79
Changing the colour calibration....................80
SD card ........................................................80
Option
10.6 Optional automatic duplex unit.....................82
10.7 Optional input tray ........................................82
10.8 Setting the optional input tray/optional
automatic duplex unit ...................................83
5
Table of Contents
11.Help
Error Messages
11.1 Error messages – Reports .......................... 84
11.2 Error messages – Display ........................... 85
Troubleshooting
11.3 When a function does not work ................... 89
12.Paper Jams
Jams
12.1 Recording paper jam ................................... 99
12.2 Document jams (Automatic document feeder)
.................................................................. 104
13.Cleaning
Cleaning
13.1 Cleaning the white plates and glass.......... 105
13.2 Cleaning the document feeder rollers........ 106
13.3 Cleaning the paper chute .......................... 107
14.General Information
Printed Reports
14.1 Reference lists and reports ....................... 108
Specifications
14.2 Specifications ............................................ 109
Copyrights
14.3 Information of copyrights and licences ...... 112
15.Index
15.1 Index......................................................... 122
6
1. Introduction and Installation
Accessories
1
Introduction and Installation
1.1 Supplied accessories
1.2 Accessory information
1 Toner cartridge (starter)
(Cyan/Magenta/Yellow/Black)*1
To ensure that the unit operates properly, we
recommend the use of Panasonic toner cartridge and
drum cartridge.
■ Replacement accessories
– Toner cartridge
2 Colour drum cartridge
3 Monochrome drum
cartridge
4 Waste toner cartridge 5 CD-ROM
(pre-installed inside the
unit)
6 Quick reference guide
–
7 Quick installation guide
–
–
–
8 Power cord
9 Telephone line cord
Colour
Model No. (Part No.)
Cyan
KX-FATC501A
Magenta
KX-FATM502A
Yellow
KX-FATY503A
Black
KX-FATK504A
L Prints about 2,000 sheets of letter-size pages
with a 5 % coverage using KX-FATC501A/KXFATM502A/KX-FATY503A and about 2,500
sheets using KX-FATK504A.
Toner cartridge (high capacity)
Colour
Model No. (Part No.)
Cyan
KX-FATC506A
Magenta
KX-FATM507A
Yellow
KX-FATY508A
Black
KX-FATK509A
L Prints about 4,000 sheets of letter-size pages
with a 5 % coverage.
Colour drum cartridge
L Model No. (Part No.): KX-FADC510A
Monochrome drum cartridge
L Model No. (Part No.): KX-FADK511A
Waste toner cartridge
L Model No. (Part No.): KX-FAW505A
■ Optional accessories
– Optional lower input tray
L Model No. (Part No.): KX-FAP317A
– Automatic duplex unit
L Model No. (Part No.): KX-FAB318A
*1 Prints about 4,000 letter-size pages with a 5 %
coverage (page 110).
Note:
L Save the original carton and packing materials for
future shipping and transportation of the unit.
L After unpacking the product, take care of the power
plug cap and/or packing materials appropriately.
7
1. Introduction and Installation
When you press {Monitor} while receiving a call,
you will be able to hear the other party, but the
other party will not be able to hear you.
Finding the Controls
1.3 Button descriptions
AB
C D E FG H
I
JK
L M NO
Q R
P
A {Copy}
L To switch to copy mode (page 20, 40).
B {Scan}
L To switch to scan mode (page 20, 35).
C {Advance}*1
L To switch to the basic/advance settings.
D {Menu}
L To start or exit programming.
E {Set}*1
L To store a setting during programming.
F {Redial}{Pause}
L To redial the last number dialed. If the line is busy
when you send a fax, the unit will automatically
redial the number 1 time.
L To insert a pause during dialing.
G {Flash}
L To access special telephone services or for
transferring extension calls.
H {Tone}
L To change from pulse to tone temporarily during
dialing when your line has rotary/pulse service.
I {Fax Auto Answer}
L To turn the auto answer setting ON/OFF (page
50).
J {Fax}
L To switch to fax mode (page 20, 45).
K {Print}
L To switch to print mode (page 20, 31, 33).
L {Back}*1
L To return to the previous display.
L To erase a character/number.
M Navigator key*1
L To select desired settings.
L To adjust the volume (page 22).
L To search for a stored item (page 47).
N {Call Display}
L To use Call Display features (page 55).
O {Monitor}
L To initiate dialing.
8
P {Black}
L To copy a document in monochrome (page 40).
L To scan a document in monochrome (push scan)
(page 35).
L To print a document in monochrome (direct print)
(page 31, 33).
L To send or receive a fax (page 45).
L To print a received fax document (page 51).
Q {Colour}
L To copy a document in colour (page 40).
L To scan a document in colour (push scan) (page
35).
L To print a document in colour (direct print) (page
31, 33).
R {Stop}
L To stop an operation or programming session.
*1 See page 9 for details.
1. Introduction and Installation
1.4.1 Display and buttons
1.4 Display descriptions
B
A
C
The following buttons can be used to navigate through
operations or to select items shown on the display.
DE
Copy
A
B
F
Basic
Copies
01
Zoom
100%
Contrast
Resolution
Text/Photo
Page Layout
Disabled
Select Menu.
Copy:
G
A Feature mode
L Displays the feature mode status.
B Status bar
L Displays the operation mode (page 20).
L Displays date and time (page 22).
L Displays error messages (page 85).
C Main display
L Displays the feature settings.
L Displays thumbnail images saved on an SD™
card (page 31) or received fax documents (page
51).
L Displays error messages (page 85).
D SD card icon
C D
A {Advance}
L To change the display between basic and
advanced feature modes.
L To change the feature settings during operation.
B {Set}
L To store a setting during programming.
L To place “,” and select the item, or remove “,”
and cancel the selected item.
C {Back}
L To return to the previous display.
L To exit an operation while maintaining the
settings.
D Navigator key
L To select the item shown on the display.
L To select features or feature settings during
programming.
L To navigate to the next operation.
L To scroll a displayed image (page 51).
L This icon is displayed when an SD card is
inserted (page 81).
E SD card access icon
L This icon is displayed when an SD card is
inserted (page 81).
L This icon turns green when the SD card is being
accessed.
F Toner cartridge life
L Displays the remaining toner level for each
colour.
G Button operation guide
L Displays the available buttons for the
corresponding operations.
Note:
L The displayed menu items may be different
depending on the operation. To select a menu item
not shown on the current page, scroll up or down by
using navigator key.
9
1. Introduction and Installation
1.5.2 Rear view
1.5 Overview
A
1.5.1 Front view
1 2 345
B
6
7
8
9
j
n
C D
k
1
2
3
4
5
6
7
8
9
j
k
l
m
n
ADF (Automatic Document Feeder) cover
Document guides
Document tray
Document tray extender
Document cover
Document exit
Document entrance
Power switch
SD card slot
Left cover
Left cover open lever
Standard input tray
Front cover
Recording paper exit*1
o Waste toner cartridge (pre-installed inside the
unit)*2
*1 The unit can hold up to approximately 100 sheets of
printed paper. Remove the printed paper before the
recording paper exit becomes full.
*2 The waste toner cartridge stores toner that is
discharged during printing. See page 111 for
information on the waste toner cartridge life.
H
F
lm
o
10
E G
A
B
C
D
E
F
G
H
Speaker
Power inlet
Telephone line jack
External telephone jack
LAN interface connector
LED
USB interface connector
Automatic duplex unit (optional) connector
Removing the shipping tape
Remove the shipping tape (1).
1
Note:
L Shipping tape positions are subject to change
without notice.
1. Introduction and Installation
2 Unlock the drum cartridge cover by pushing the tabs
Installation
1.6 Toner cartridge and drum
cartridge
(2) in the direction of the arrows.
The supplied toner cartridge is a starter toner cartridge.
Caution:
L Read the following instructions before you begin
installation. After you have read them, open the
drum cartridge protection bag. The drum
cartridge contains a photosensitive drum.
Exposing it to light may damage the drum. Once
you have opened the protection bag:
– Do not expose the drum cartridge to light for
more than 45 seconds.
– Do not touch or scratch the green drum
surface at the bottom of the drum cartridge.
– Do not place the drum cartridge near dust or
dirt, or in a high humidity area.
– Do not expose the drum cartridge to direct
sunlight.
L Do not leave the toner cartridge out of the
protection bag for a long time. It will decrease the
toner life.
L We cannot be responsible for any damage to the
unit or degradation of print quality which may
occur from the use of a non-Panasonic toner
cartridge and drum cartridge.
L Do not add toner to the toner cartridge.
2
3 Lift up the levers (3) and open the drum cartridge
cover (4).
1 Open the front cover (1) by holding the centre part.
3
1
4
11
1. Introduction and Installation
4 Remove the orange protector (5) by pulling it
toward you, then pull it completely out from the unit.
6 Detach the protective caps (6), then detach the
upper seal cover by holding the tab (7).
6
7
5
7 Firmly grip the colour drum cartridge (8) and
remove the protective tray (9) by sliding it toward
you.
8
9
L Do not touch or scratch the green drum surfaces
(j) at the bottom of the drum cartridge.
5 Remove the colour drum cartridge from the
protection bag.
j
8 Hold the green lever (k) of the colour drum
L Remove the shipping tape.
L Do not remove the monochrome drum cartridge
from the protection bag before installing the
colour drum cartridge in step 8.
L When holding the colour drum cartridge, be sure
to handle it over a table to prevent damage
caused by dropping it from a high position.
12
cartridge (l) using your left hand, and hold the front
part using your right hand. Then insert it into the left
side of the unit.
L Make sure that the arrows (m) match to insert
the drum cartridge correctly.
1. Introduction and Installation
L Do not touch or scratch the accumulator unit
(n).
11 Firmly grip the monochrome drum cartridge (q) and
remove the protective tray (r) by sliding it toward
you.
m
q
k
r
L Do not touch or scratch the green drum surface
(s) at the bottom of the drum cartridge.
l
s
n
9 Remove the monochrome drum cartridge from the
protection bag.
12 Insert the monochrome drum cartridge (t) into the
right side of the unit.
L Make sure that the arrows (u) match to insert
the drum cartridge correctly.
L Do not touch or scratch the accumulator unit
(v).
u
L Remove the shipping tape.
10 Detach the protective cap (o), then detach the
upper seal cover by holding the tab (p).
p
o
t
v
13
1. Introduction and Installation
13 Before opening the protection bag of the new toner
17 Lift the drum cartridge cover (a) and push down on
cartridges, shake them vertically more than 10
times.
the levers (b) to close.
L Push the levers down until you hear a click to
ensure that the cover is locked.
a
14 Remove the 4 toner cartridges from the protection
bags.
L Remove the shipping tape.
15 Remove each protective tray (w) by lifting up the
toner cartridge (x).
x
w
16 Insert each toner cartridge (y) in the appropriate
colour slot.
From left to right, yellow, magenta, cyan, black.
L Make sure that the arrows (z) match to insert
the toner cartridge correctly.
L Do not touch the toner cartridge shutter at the
bottom of the toner cartridge. The toner may spill
out of the toner cartridge.
b
18 Close the front cover.
z
y
When to replace the toner cartridge and the drum
cartridge
When the display shows the following, replace the toner
cartridge.
– “Change Supplies Toner Low”
14
1. Introduction and Installation
–
–
–
–
“Change
“Change
“Change
“Change
Supplies
Supplies
Supplies
Supplies
Black :Low”
Cyan
:Low”
Magenta:Low”
Yellow :Low”
–
–
–
–
–
“Change
“Change
“Change
“Change
“Change
Supplies
Supplies
Supplies
Supplies
Supplies
Toner Empty”
Black :Empty”
Cyan
:Empty”
Magenta:Empty”
Yellow :Empty”
When the display shows the following, replace the drum
cartridge.
– “Colour Drum Life Low”
– “Monochrome Drum Life Low”
–
–
“Colour Drum Replace”
“Monochrome Drum Replace”
Note:
L When replacing a toner cartridge, be sure to seal the
used toner cartridge in a plastic bag or other
container so that toner does not spill out of it.
L When replacing the colour drum cartridge, hold the
green lever using the same hand you used to install
it. See step 8 on page 12 for instructions.
L To ensure that the unit operates properly, we
recommend the use of Panasonic toner cartridge
and drum cartridge. See page 7 for accessory
information.
L See page 110 for information on toner life and drum
life.
1.7 Recording paper
The standard input tray unit can hold:
– Up to 250 sheets of 75 g/m2 (20 lb) paper.
– Up to 230 sheets of 80 g/m2 (21 lb) paper.
– Up to 200 sheets of 90 g/m2 (24 lb) paper.
– Up to 180 sheets of 105 g/m2 (28 lb) paper.
– Up to 25 transparencies.*1
– Up to 25 labels.*1
– Up to 10 envelopes.*1
– Up to 10 card stocks.*1
*1 Only when using the unit as a printer. See page 30
for details.
L Please refer to page 110 for information on recording
paper.
L The unit is set for printing letter-size plain paper
by default.
– To use A4 or legal-size paper, change the
recording paper size setting (feature #380 on
page 60).
– To use thin or thick paper, change the
recording paper type setting (feature #383 on
page 60).
1 Pull the standard input tray (1) until it clicks into
place, then pull it completely out, lifting the front part
of the tray.
Waste disposal method
Waste material should be disposed of under conditions
which meet all national and local environmental
regulations.
Toner save feature
If you want to reduce toner consumption, set the toner
save setting to ON (feature #482 on page 61). The toner
cartridge will last approximately 40 % longer. This
feature may lower the print quality.
1
2 Before loading a stack of paper, fan the paper to
prevent paper jams.
15
1. Introduction and Installation
3 Load the paper, print-side up (2).
Important:
L Push and lock the plate (3) in the standard
input tray, if it has come up.
L Make sure that the recording paper guides (6)
are at the paper size mark and the recording
paper is under the paper limit mark (7). The
paper should not be loaded over the tab (8).
7
6
8
3
2
4 Pinch the right side of the recording paper guide
(4), then slide it to match the paper size mark.
Pinch the front and back recording paper guides (5)
at the same time, then slide them together to match
the paper size mark.
5
6
5 Insert the standard input tray to the unit, lifting the
front part of the tray. Then push it completely into the
unit.
5
4
Note:
L If the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.
L If the standard input tray does not close, the plate in
the standard input tray may be lifted. Push the paper
and make sure that the paper is laid flat in the
standard input tray.
16
1. Introduction and Installation
Caution for the standard input tray
L Do not drop the standard input tray.
L Hold the standard input tray with both hands
when removing or installing. The standard input
tray weighs approximately 2.9 kg (6.4 lb) when
the recording paper is fully loaded.
Do not touch the plate (1) on the left side of the
standard input tray.
1
Approx. 2.9 kg (6.4 lb)
17
2. Preparation
2 Preparationand Setup
Connections
2.1 Connections
Caution:
L When you operate this product, the power outlet
should be near the product and easily
accessible.
Note:
L If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
L A telephone handset cannot be connected directly to
this unit. To talk to the other party, please connect an
extension telephone.
Using surge protectors
L The warranty does not cover damage due to power
line surges or lightning. For additional protection, we
recommend using a surge protector (9).
8
3
7
If the unit shares a single telephone line with a DSL
service
Fax transmission/reception may be disturbed, noise
interference may be heard during telephone
conversations, or Call Display (page 55) may not
function properly. Please attach a DSL filter (j) to the
telephone line cord of the unit to prevent this. A DSL filter
is provided by your DSL service provider.
5
4
6
1
2
9
1 Power cord
L Connect to a power outlet
(120 V, 60 Hz).
2 Telephone line cord
L Connect to a single telephone line jack (RJ11).
3 [EXT] jack
L You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.
4 Answering machine (not supplied)
5 To the internet
6 Network router/Network hub (not supplied)
L Also connect networked computers.
7 LAN cable (not supplied)
L To assure continued emission limit compliance,
only use a shielded LAN cable (category 5
straight cable).
8 Automatic duplex unit (optional) connector
IMPORTANT NOTICE FOR THE USB
CONNECTION
L DO NOT CONNECT THE UNIT TO A
COMPUTER WITH THE USB CABLE UNTIL
PROMPTED BY THE MULTI-FUNCTION
STATION (page 25).
18
j
Using network router/network hub
L We recommend using network routers/network hubs
(6) under secure network environments. Consult
your network administrator for firewall settings, etc.
L The warranty does not cover damage due to security
problems or any disadvantages relating to it.
2. Preparation
2.2 Turning the power switch ON
2.3 Dialing mode
Turn the power switch to the ON position (1).
If you cannot dial (page 45), change this setting
according to your telephone line service.
1
{Menu}
{Set}
1 {Menu}
2 Press {#}{1}{2}{0} to display “Dialing Mode”.
3 Press {1} or {2} to select the desired setting.
{1} “Pulse”: For rotary/pulse dial service.
{2} “Tone” (default): For tone dial service.
4 {Set}
5 Press {Menu} to exit.
19
2. Preparation
Document Requirements
2.4 Selecting the operation mode
(Scan/Copy/Fax/Print)
You can select the desired mode by pressing one of the
following buttons.
2.5 Setting the original
2.5.1 Using the scanner glass
1
2
–
–
–
–
{Scan}: Select this mode when using the unit as a
scanner (page 35).
{Copy}: Select this mode when using the unit as a
copier (page 40).
{Fax}: Select this mode when using the unit as a fax
machine (page 45).
{Print}: Select this mode when using the unit as a
printer (page 31).
Note:
L The default operation mode is the copy mode.
L You can change the default operation mode (feature
#463 on page 61) and the timer before returning to
the default operation mode (feature #464 on page
61).
1 Open the document cover (1).
2 Place the document FACE DOWN on the scanner
glass (2), aligning the top left of the document with
the corner to which the m mark points.
3 Close the document cover.
Note:
L Confirm that there are no documents in the
automatic document feeder.
L Place the original onto the scanner glass gently. Do
not press down too firmly to avoid malfunction.
L If the original is a thick book, do not close the
document cover.
L Check that any ink, paste or correction fluid has dried
completely.
L Effective scanning area is as follows:
Effective scanning area
L Shaded area will be scanned.
4 mm
(5/32")
208 mm
(8 3/16")
4 mm
(5/32")
4 mm
(5/32")
20
347 mm
(13 11/16")
4 mm
(5/32")
2. Preparation
Minimum document size
148 mm
(6")
2.5.2 Using the automatic document feeder
1
148 mm
(6")
600 mm
(23 5/8")
Maximum document size
216 mm
(8 1/2")
1 Insert the document (up to 50 pages) FACE UP into
the feeder until a single beep is heard.
2 Adjust the width of the document guides (1) to fit
Effective scanning area
L Shaded area will be scanned.
the actual size of the document.
Note:
L Confirm that there are no documents on the scanner
glass.
L Check that any ink, paste or correction fluid has dried
completely.
L Remove clips, staples or other fasteners.
L Do not insert the following types of documents (Make
a copy of the document using the scanner glass and
set the copy instead.):
– Chemically treated paper such as carbon or
carbonless duplicating paper
– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface
– Paper with printing on the opposite side that can
be seen through the other side, such as
newsprint
L The total height of the documents when laid flat,
must be less than 5 mm (3/16"). If the documents
exceed the capacity of the automatic document
feeder, they may fall or cause a jam in the feeder.
L To set a document with a width of less than 210 mm
(8 1/4"), we recommend using the scanner glass to
copy the original document onto A4 or letter-size
paper, then setting the copied document.
L Do not set documents that do not satisfy the
requirements of size and weight. Make a copy of the
document using the scanner glass and set the copy.
L Available document size, document weight and
effective scanning area are as follows:
4 mm (5/32")
4 mm (5/32")
4 mm (5/32")
4 mm (5/32")
208 mm (8
3/16")
216 mm (8 1/2")
Document weight
L Single sheet:
45 g/m2 to 90 g/m2 (12 lb to 24 lb)
L Multiple sheets:
60 g/m2 to 80 g/m2 (16 lb to 21 lb)
Using the document tray extender
When you insert the legal-size paper, open the
document tray extender (1).
1
21
2. Preparation
Volume
Initial Programming
2.6 Adjusting the volume
2.7 Date and time
Important:
L Before adjusting the volume, set the operation
mode to fax mode. If the {Fax} light is OFF, turn it
ON by pressing {Fax}.
{Menu}
{Set} {V}{^}{<}{>}
1 {Menu} i {#}{1}{0}{1} i {Set}
2 Enter the current month/date/year/hour/minute.
{Fax}
{V}{^}{<}{>}
Example: August 10, 2009 10:15 PM (12 hour
clock format)
Ringer volume
1. Press {V} or {^} repeatedly to select “Date”.
i {<}/{>}
1. Press {V} or {^} repeatedly to select “Ringer
Volume”.
2. Press {0}{8} {1}{0} {2}{0}{0}{9}.
M:08/D:10/Y:2009
2. Press {<} or {>}.
To turn the ringer OFF
1. Press {V} or {^} repeatedly to select “Ringer
Volume”.
2. Press {<} repeatedly to display “Ringer Off” in
the status bar.
L The unit will not ring.
L To turn the ringer back ON, press {>}.
Monitor volume
1. While using the monitor, press {V} or {^}
repeatedly to select “Monitor Volume”.
2. Press {<} or {>}.
3. {Set}
4. Press {V} or {^} repeatedly to select “Time”.
i {<}/{>}
5. Press {1}{0} {1}{5}, then press {V} or {^}
repeatedly to select “PM”.
10:15PM
6. {Set}
3 Press {Menu} to exit.
Note:
L The other party’s fax machine will print the date and
time on the top of each page you send according to
your unit’s date and time setting.
L If you select French for the language (feature #110
on page 59), the time is set using a 24 hour clock.
Example: 15:15
Press {1}{5}{1}{5}.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Call Display service
The date and time will be automatically set according to
the received caller information.
L If the time has not previously been set, Call Display
will not adjust the clock.
L You can turn this feature OFF (feature #226 on page
60).
22
2. Preparation
2.8 Your logo
2.9 Your fax number
You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
You can program your fax number so that it appears on
the top of each page sent.
{Menu}
{Menu}
{Back} {<}{>} {Set}
1 {Menu} i {#}{1}{0}{2} i {Set}
2 Enter your logo, up to 30 characters (see page 78 for
character entry). i {Set}
3 Press {Menu} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
character, and make the correction.
L To erase all characters, press and hold {Back}.
{Flash}
{Back} {<}{>} {Set}
1 {Menu} i {#}{1}{0}{3} i {Set}
2 Enter your fax number, up to 20 digits.
L
L
L
L
To enter a “+”, press {*}.
To enter a space, press {#}.
To enter a hyphen, press {Flash}.
To erase a number, press {Back}.
3 {Set}
4 Press {Menu} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
L To erase all numbers, press and hold {Back}.
23
2. Preparation
For the default gateway:
2.10 Configuring the unit to
access the LAN
You can print documents, scan documents, receive
faxes or send faxes using a computer on the LAN. To
enable these features, you need to set the IP address,
subnet mask, and default gateway for the unit.
Important:
L Consult your network administrator when setting
the IP address, subnet mask, and default
gateway.
2.10.1 Setting up automatically with a
DHCP server
1. Press {5}{0}{3} to display “Default
Gateway”.
2. {Set} i Enter the default gateway of the
network. i {Set}
5 Press {Menu} to exit.
6 Install Multi-Function Station on the computer that
you want to use it with. See page 25 for details.
To correct a mistake in the IP address, subnet mask,
or default gateway
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
Your situation:
– When only one unit is connected to the LAN.
2.10.3 Setting the computer for PC fax
reception
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
You need to select the computer that will be used for
receiving faxes.
L Make sure the PC fax setting is turned ON
beforehand (feature #442 on page 65).
L Make sure the fax preview mode is turned OFF
beforehand (feature #448 on page 65).
1 After connecting the LAN cable to the unit and the
computer, turn the power switch ON.
L The IP address, subnet mask, and default
gateway will be set automatically.
2 Install Multi-Function Station on the computer that
you want to use it with. See page 25 for details.
Note:
L You can connect two or more units and assign IP
addresses automatically with a DHCP server, but we
recommend assigning static IP addresses manually
for each unit to avoid unnecessary trouble.
2.10.2 Setting up manually
Your situation:
– When your network administrator does not manage
the network with a DHCP server.
– When two or more units are connected to the LAN.
You need to assign an IP address, subnet mask, and
default gateway manually.
1
2
3
4
{Menu}
Press {#}{5}{0}{0} to display “DHCP”.
Press {0} to select “Disabled”. i {Set}
Set each item.
For the IP address:
1. Press {5}{0}{1} to display “IP Address”.
2. {Set} i Enter the IP address of the unit. i
{Set}
For the subnet mask:
1. Press {5}{0}{2} to display “Subnet Mask”.
2. {Set} i Enter the subnet mask of the network.
i {Set}
24
1 {Menu} i {#}{4}{4}{3} i {Set}
2 Press {V} or {^} repeatedly to select the desired
computer. i {Set}
3 Press {Menu} to exit.
Note:
L If the unit is not connected to the LAN, the computer
connected to the unit by USB is assigned as the
default computer for PC fax reception.
L To select the desired computer easily, change the PC
name beforehand (page 27).
2. Preparation
2.11 Installing Multi-Function
Station
2.11.1 Required computer environment
Panasonic Multi-Function Station software enables the
unit to carry out the following functions:
– Printing on plain paper, thin and thick paper,
transparencies, labels, envelopes and card stock
– Scanning documents and converting an image into
text with Readiris OCR software
– Scanning from other applications for Microsoft®
Windows® that support TWAIN scanning and WIA
scanning (Windows XP/Windows Vista®, USB
connection only)
– Storing, editing or erasing items in directories using
your computer
– Programming the features using your computer
– Sending, receiving fax documents using your
computer
To use Multi-Function Station on your computer, the
following are required:
Operating System:
Windows 98/Windows Me/Windows 2000/Windows
XP/Windows Vista
CPU:
Windows 98/Windows Me/Windows 2000: Pentium® y
or higher processor
Windows XP: Pentium z or higher processor
Windows Vista: Pentium 4 or higher processor
RAM:
Windows 98/Windows Me: 64 MB (128 MB or more
recommended)
Windows 2000/Windows XP: 128 MB (256 MB or more
recommended)
Windows Vista: 512 MB (1,024 MB or more
recommended)
Other Hardware:
CD-ROM drive
Hard disk drive with at least 150 MB of available space
USB interface
LAN interface (10Base-T/100Base-TX)
Other:
Internet Explorer® 5.0 or later
Warning:
L To assure continued emission limit compliance;
– use only shielded USB cable (example: Hi-Speed
USB 2.0 certified cable).
– use only shielded LAN cable (category 5 straight
cable).
L To protect the unit, use only shielded USB cable in
areas where thunderstorms occur.
2.11.2 Installing Multi-Function Station on
a computer
L Install Multi-Function Station (CD-ROM) before
connecting the unit to a computer with the USB
cable. If the unit is connected to a computer with
the USB cable before installing Multi-Function
Station, the [Found New Hardware Wizard]
dialogue box will appear. Click [Cancel] to close
it.
L The screenshots shown in these instructions are
for Windows XP and are included for reference
only.
L The screenshots shown in these instructions
may differ slightly from those of the actual
product.
L Software features and appearance are subject to
change without notice.
L If you are using KX-MB200/KX-MB700/KXFLB880 series, see page 98.
1 Start Windows and exit all other applications.
L For Windows 2000, Windows XP and Windows
Vista users, you must be logged in as an
administrator in order to install Multi-Function
Station.
2 Insert the supplied CD-ROM into your CD-ROM
drive.
L If the [Select Language] dialogue box appears,
select the language that you want to use with this
software. Click [OK].
L If the installation does not start automatically:
Click [Start]. Choose [Run...]. Type “D:\Install”
(where “D” is the drive letter of your CD-ROM
drive). Click [OK].
(If you are not sure what the drive letter is for your
CD-ROM drive, use Windows Explorer and look
for the CD-ROM drive.)
3 [Easy Installation]
L The installation will start automatically.
4 When the setup program starts, follow the on-screen
instructions.
L Readiris OCR software (page 36) and Device
Monitor (page 79) will also be installed.
5 The [Connect Type] dialogue box appears.
For USB connection:
1. [Connect directly with a USB cable.] i [Next]
L The [Connect Device] dialogue box will appear.
Note:
L A USB cable is not supplied. Please purchase a
shielded Type-A male/Type-B male USB cable.
25
2. Preparation
2. Connect the unit to a computer with the USB cable
(1), then click [Next].
L Adobe® Reader® is required to view the
operating instructions.
Note:
L If the screen prompts you to insert the CD-ROM for
the operating system when installing Multi-Function
Station, insert it into your CD-ROM drive.
L If you install the operating instructions, you can view
them anytime by clicking [o] on the Multi-Function
Station launcher.
1
L If the unit is connected to your computer, the
model name will be automatically detected.
L You can change the name of the unit if necessary.
3. Click [Install], then follow the on-screen
instructions.
L The files will be copied to your computer.
For LAN connection:
1. [Connect via the Network.] i [Next]
L The [Select a Network Device] dialogue box
will appear.
2. Check [Select in the searched list] and select the
unit from the list.
L If the name of the desired unit is not displayed on
the list, and the IP address for the unit has been
assigned, check [Direct input] and enter the IP
address.
3. [Next]
L You can change the name of the unit if necessary.
4. Click [Install], then follow the on-screen
instructions.
L The files will be copied to your computer.
Important notice
If you use Windows XP or Windows Vista, a message
may appear after connecting the unit with the USB
cable. This is normal and the software will not cause
any difficulties with your operating system. You can
continue the installation with no problem. This kind of
message is displayed:
L For Windows XP users
“The software you are installing for this hardware
has not passed Windows Logo testing to verify its
compatibility with Windows XP.”
L For Windows Vista users
“Would you like to install this device software?”
To view or install the operating instructions data
1. Start Windows and insert the supplied CD-ROM into
your CD-ROM drive.
2. Click [Operating Instructions], then follow the onscreen instructions to view or install the operating
instructions in PDF format.
26
To use another unit with the computer
You need to add the printer driver for each unit, as
follows.
1. Start Windows and insert the supplied CD-ROM into
your CD-ROM drive.
2. [Modify] i [Add Multi-Function Station
Driver]. Then follow the on-screen instructions.
Note:
L You cannot connect more than one unit to the same
computer at the same time (USB connection only).
To modify the software (To add or uninstall each
component)
You can select the components to install or uninstall
anytime after the installation.
For Windows 2000, Windows XP and Windows Vista
users, you must be logged in as an administrator in order
to modify Multi-Function Station.
1. Start Windows and insert the supplied CD-ROM into
your CD-ROM drive.
2. [Modify]i [Modify Utilities]. Then follow the onscreen instructions.
To uninstall the software
For Windows 2000, Windows XP and Windows Vista
users, you must be logged in as an administrator in order
to uninstall Multi-Function Station.
[Start] i [All Programs] or [Programs] i
[Panasonic] i the unit’s name i [Uninstall]. Then
follow the on-screen instructions.
2. Preparation
2.12 Starting Multi-Function
Station
[Start] i [All Programs] or [Programs] i
[Panasonic] i the unit’s name i [Multi-Function
Station]
L Multi-Function Station will appear.
[n]
L To display information about Multi-Function Station.
Note:
L You can confirm if the unit is connected to your
computer by using Device Monitor (page 79).
L Computer features (printing, scanning, etc.) may not
function properly in the following situations:
– When the unit is connected to a computer that
was custom-built by the user.
– When the unit is connected to the computer via a
PCI card or other expansion card.
– When the unit is connected to another piece of
hardware (such as a USB hub or interface
adapter) and not connected directly to the
computer.
To change the settings
You can change the settings for Multi-Function Station
beforehand.
1. Select [Settings] from Multi-Function Station.
2. Click the desired tab and change the settings. i
[OK]
[Scan] (page 38)
L To scan and display the scanned images.
L To scan and create an image file.
L To scan and send by e-mail.
L To scan and convert an image into editable text data.
[PC FAX]
L To send a document created on the computer as a
fax message (page 49).
L To display a fax document received on the computer
(page 54).
[Remote Control] (page 78)
L To program the features.
L To store, edit or erase items in directories.
L To view items in the journal report or caller’s list.
L To store caller information into directories.
L To store or erase items for broadcast transmission.
[Utilities]
L To start Quick Image Navigator (Windows
2000/Windows XP/Windows Vista)/Multi-Function
Viewer (Windows 98/Windows Me) (page 38).
L To start Device Monitor (page 79).
L To start OCR application (page 36).
L To start the configuration web page (page 58, 79)
(LAN connection only).
[Settings] (page 27)
L To change the general settings.
L To change the settings for scanning.
L To change the folder for saving the received fax
documents (page 51).
[o]
L For detailed instructions on Multi-Function Station.
L To view operating instructions.
[p]
L To display usage tips.
[General]
– [Launcher display setting]: To select the display
type of the launcher.
– [OCR Path]: To select the OCR software.
– [PC name list up on device] (LAN connection
only): To select whether or not your computer name
is displayed on the unit.
– [PC name] (LAN connection only): The computer
name that will be displayed on the unit.
[Scan]
– [Save to]: To select the folder where the scanned
image or the received fax document will be saved.
– [Viewer][File][E-Mail][OCR][Custom]: To
change scanning settings for Multi-Function scan
application.
Note:
L Assign a unique name for the [PC name] to avoid
overlapping, or the scanned image may be sent to an
undesired computer.
To select the default E-mail software
The default E-mail software is used when using
“4.1.3 Scan to E-mail”, page 36.
You can select the default E-mail software as follows.
For Windows 98/Windows Me/Windows 2000:
1. [Start] i [Settings] i [Control Panel] i
[Internet Options] i [Programs] i [E-mail]
2. Select the desired MAPI-compliant E-mail software
such as [Outlook Express], etc. i [OK]
For Windows XP:
1. [Start] i [Control Panel] i [Internet
Options] i [Programs] i [E-mail]
27
2. Preparation
2. Select the desired MAPI-compliant E-mail software
such as [Outlook Express], etc. i [OK]
For Windows Vista:
1. [Start] i [Control Panel] i [Internet
Options] i [Programs] i [Set programs] i
[Set program access and computer defaults]
L If the [User Account Control] dialogue box
appears, click [Continue].
2. [Custom]
3. Select the desired MAPI-compliant E-mail software
such as [Windows Mail], etc. from [Choose a
default e-mail program]. i [OK]
28
3. Printer
3 Printer
Printer
3.1 Printing from Windows
applications
You can print a file created in a Windows application. For
example, to print from WordPad, proceed as follows:
1 Open the document you want to print.
2 Select [Print...] from the [File] menu.
L The [Print] dialogue box will appear.
For details about the [Print] dialogue box, click
[?], then click the desired item.
3 Select the unit’s name as the active printer.
L If you have changed the name of the unit when
installing, select that name from the list.
L For easier greyscale printing, select the unit’s
name with [B/W] attached to the name.
L To change the printer settings, proceed as
follows.
For Windows 98/Windows Me:
Click [Properties], then click the desired tab.
Change the printer settings, then click [OK].
For Windows 2000:
Click the desired tab and change the printer
settings.
For Windows XP/Windows Vista:
Click [Preferences], then click the desired tab.
Change the printer settings, then click [OK].
4 Click [Print] or [OK].
L The unit will start printing.
and types of paper) on the unit before purchasing large
quantities.
You can change or display the settings on the following
tabs.
[Basic]: Paper size, media type, pages per sheet, etc.
[Output]: Number of prints, collate, etc.
[Quality]: Colour mode, colour management, toner
save feature, etc.
[Effects]: Watermark, overlay.
[Profile]: Saving the desired settings, selecting the
saved settings, etc.
[Support]: Version information.
Note:
L Select the desired media type on the [Basic] tab
according to the recording paper.
Recording paper type
Media type
Plain paper
75 g/m2 to 105 g/m2
(20 lb to 28 lb)
[Plain Paper]
Thin paper
60 g/m2 to 74 g/m2
(16 lb to 19 lb)
[Thin Paper]
Thick paper
106 g/m2 to 165 g/m2
(29 lb to 44 lb)
[Thick Paper]
Transparency
[Transparency]
Label
[Label]
Envelope*1
–––––––––
Card stock
163 g/m2 (90 lb)
[Card Stock]
*1 Select [Envelope #10] or [Envelope DL] for
paper size.
L When printing from a computer, the printer
properties setting overrides the following unit’s
programming features:
– Media type setting (feature #383 on page 60)
– Toner save setting (feature #482 on page 61)
L When printing on envelopes, press
{Black}/{Colour} on the unit after step 4. Change
the colour mode on the [Quality] tab beforehand.
Note:
L To stop printing from the unit, see page 79.
L To load paper, see page 15, 30.
L For details about the paper specifications, see page
110.
L If a printing error occurs, the Device Monitor (page
79) will start automatically and display the error
information.
Setting the printer properties
You can change the printer setting in step 3. We
recommend that you test paper (especially special sizes
29
3. Printer
3.1.1 Printing on special media
You can print not only on plain paper but also on special
media (transparencies / labels / envelopes / card stocks).
L Please refer to page 110 for information on recording
paper.
L To load paper, see page 15.
To print on transparencies
Use transparencies designed for laser printing.
We recommend the following:
3M® CG3300/PP2500
L Do not stack more than 25 transparencies at a
time.
L After printing, place transparencies on a flat
surface to cool and to prevent them from curling.
L Do not re-use transparencies that have already been
fed through the unit. This includes transparencies
that have been fed through and ejected without being
printed on.
L Some types of transparencies have instructions
recommending which side to print on. If the print
quality is poor, try printing on the other side of a new
transparency.
To print on labels
Use labels designed for laser printing. We recommend
the following:
Avery®
5160/5163/5660/5663/L7159/L7164
L Do not stack more than 25 labels at a time.
L Do not use the following types of labels:
– Labels that are wrinkled, damaged or separated
from the backing sheet.
– Any sheet of labels that has spaces in it where
some of the labels have been removed.
– Labels that do not completely cover the backing
sheet as follows:
To print on envelopes
Use envelopes designed for laser printing. We
recommend the following:
– High quality envelopes of 90 g/m2 (24 lb) paper,
– Envelopes that have thin, sharply creased leading
edges,
– Envelopes that have diagonal seams, and
– Envelopes with a moisture content of 4 % to 6 % by
weight.
L Load envelopes with the sealing flap FACE DOWN.
L Do not stack more than 10 envelopes at a time.
Note:
L Wrinkles and waving may occur in some cases, even
if high quality envelopes are used.
L Avoid printing in high humidity. High humidity may
cause the envelope to curl or seal the envelope.
L Store envelopes away from moisture and humidity,
where they can lay flat and their edges will not be
bent or damaged.
Do not use envelopes with any of the following
characteristics (using these may result in paper
jams):
L Irregularly shaped envelopes
L Envelopes with curls, wrinkles, nicks, twists, dogears or other damage
L Envelopes with side seam construction
L Highly textured envelopes, or envelopes with
extremely shiny surfaces
L Envelopes that seal by removing a peel-off strip
L Envelopes with more than one sealing flap
L Self-adhesive envelopes
L Envelopes that are baggy or not sharply creased
L Embossed envelopes
L Envelopes that have previously been printed on
L Envelopes that include cotton and/or fibre material
Side seam
construction
30
Peel-off strip
Multiple flaps
3. Printer
3.2 Direct printing from an SD
card
Twisted
Curled
Bent-edged
You can directly print a file stored on an SD card without
using your computer.
{Print}
Waved
Dog-eared
Self adhesive
Do not attempt to print on any of the following types
of envelopes (these may cause damage to the unit):
L Envelopes with clasps, snaps or tie strings
L Envelopes with transparent windows
L Envelopes that use encapsulated types of adhesive
that do not require moistening but rely on pressure to
seal them
{Back} {Black} {Colour}{Stop}
{Advance} {Set}{V}{^}{<}{>}
1 Insert the SD card in the SD card slot of the unit
(page 81).
L An SD card is not supplied.
2 {Print}
3 Press {V} or {^} repeatedly to select “SD Card”.
Clasp
Transparent window
3.1.2 Duplex printing (optional)
Connecting the optional automatic duplex unit allows
duplex printing (page 82). For example, to print from
WordPad, proceed as follows:
1 Open the document you want to print.
2 Select [Print...] from the [File] menu.
3 Select the unit’s name as the active printer.
L For Windows 2000 users, go to step 5.
4 For Windows 98/Windows Me:
[Properties]
For Windows XP/Windows Vista:
[Preferences]
5 Click the [Basic] tab.
6 Select the desired duplex layout. i [OK]
L Select [None] to deactivate this feature.
L You can also change the duplex margin.
7 Click [Print] or [OK].
Booklet feature
You can print the document, then fold it in half to create
booklets. The documents will be reduced to fit the
recording paper.
To use this feature, select the [Booklet] icon for the
[Layout Print] after step 5 on “3.1.2 Duplex printing
(optional)”, page 31.
i {Set}
L The printable files stored on the SD card will be
displayed.
4 Press {V} or {^} repeatedly to select the desired file.
i {Set}
L To select a file inside a folder, press {V} or {^},
and then press {Set}. Repeat this until the
desired file is selected.
L To select the desired file in thumbnail display
mode, press {<} or {>}, and then press {Set}.
L You can select up to 40 files. To select multiple
files, repeat this step.
L If you press {Stop}, you will return to step 3, and
the selection will be cancelled.
L If you press {Back}, you will return to step 3, and
the selection will be maintained.
5 If necessary, change the direct print settings (page
32).
6 {Black}/{Colour}
Note:
L To switch between the file name display and
thumbnail display, press {*}. You can change the
default display mode (feature #673 on page 75).
L The file formats that can be printed are as follows:
– TIFF
– JPEG
– PDF (Image type only. Such as files scanned
from the unit, files scanned from the computer
using Quick Image Navigator/Multi-Function
Viewer, or received fax documents saved to an
SD card.)
31
3. Printer
L The up to 8 characters are displayed for the file
name.
L For details about the SD card, see page 80.
L To stop printing, see page 79.
What “,” means
“,” next to a file name or thumbnail means the file is
selected.
3.2.1 Setting direct print features
You can change the direct print settings. The settings are
reset after each printing.
To change the number of copies to print
1. {Advance}
2. Press {V} or {^} repeatedly to select “Copies”.
4. {Set} i {Advance}
To select duplex print
Connecting the optional automatic duplex unit allows
duplex printing (page 82). You can also select the type of
binding.
1. {Advance}
2. Press {V} or {^} repeatedly to select “Duplex”.
3. Press {<} or {>} repeatedly to select the desired
setting.
– “Off”: Deactivates this feature.
– “Long Edge”: For long edge binding.
– “Short Edge”: For short edge binding.
4. {Set} i {Advance}
3. Enter the number of copies (up to 99). i {Set} i
{Advance}
To select continuous print
You can select whether or not documents in different file
formats are printed onto 1 page in layout printing or
duplex printing.
To change the orientation
You can change the print orientation.
1. {Advance}
1. {Advance}
2. Press {V} or {^} repeatedly to select
“Orientation”.
3. Press {<} or {>} repeatedly to select the desired
setting.
– “Portrait”: For portrait orientation.
– “Landscape”: For landscape orientation.
2. Press {V} or {^} repeatedly to select “Continuous
Print”.
3. Press {<} or {>} repeatedly to select the desired
setting.
– “Disabled”: Only the same file formats can be
printed.
– “Enabled”: Different file formats can be printed.
4. {Set} i {Advance}
4. {Set} i {Advance}
To select the page layout (N in 1)
You can save paper by printing 2, 4 or 8 pages onto 1
page. The documents’ size will be reduced to fit the
recording paper.
1. {Advance}
2. Press {V} or {^} repeatedly to select “N in 1”.
3. Press {<} or {>} repeatedly to select the desired
setting.
– “Off”: Deactivates this feature.
– “2 in 1”: 2 pages will be printed onto 1 page.
– “4 in 1”: 4 pages will be printed onto 1 page.
– “8 in 1”: 8 pages will be printed onto 1 page.
4. {Set} i {Advance}
To adjust the brightness
You can adjust the brightness setting depending on the
document. 7 levels are available.
1. {Advance}
2. Press {V} or {^} repeatedly to select “Image
Adjustment”. i {Set}
3. Press {V} or {^} repeatedly to select
“Brightness”.
4. Press {<} or {>} repeatedly to select the desired
brightness. i {Set} i {Back} i {Advance}
To adjust the saturation
You can adjust the saturation setting depending on the
document. 7 levels are available.
1. {Advance}
To select a page border for N in 1
You can select whether or not to print a line between the
pages in N in 1 printing.
2. Press {V} or {^} repeatedly to select “Image
Adjustment”. i {Set}
1. {Advance}
3. Press {V} or {^} repeatedly to select
“Saturation”.
2. Press {V} or {^} repeatedly to select “Nin1 Page
Border”.
4. Press {<} or {>} repeatedly to select the desired
saturation. i {Set} i {Back} i {Advance}
3. Press {<} or {>} repeatedly to select the desired
setting.
– “None”: For printing without a line.
– “Solid Line”: For printing with a line.
To adjust the tint
You can adjust the tint setting depending on the
document. 7 levels are available.
32
3. Printer
1. {Advance}
2. Press {V} or {^} repeatedly to select “Image
Adjustment”. i {Set}
3. Press {V} or {^} repeatedly to select “Tint”.
4. Press {<} or {>} repeatedly to select the desired
tint. i {Set} i {Back} i {Advance}
3.3 Direct printing from an FTP
server (LAN connection only)
You can directly print a file stored on an FTP server.
Important:
L Program the FTP server settings beforehand
(page 75).
1 {Print}
2 Press {V} or {^} repeatedly to select “FTP
Server”. i {Set}
3 Press {V} or {^} repeatedly to select the desired
FTP server. i {Set}
L The printable files on the FTP server will be
displayed.
4 Press {V} or {^} repeatedly to select the desired file.
i {Set}
L To select a file inside a folder, press {V} or {^},
and then press {Set}. Repeat this until the
desired file is selected.
L You can select up to 40 files. To select multiple
files, repeat this step.
L If you press {Stop} or {Back}, you will return to
step 3, and the selection will be cancelled.
5 If necessary, change the direct print settings (page
32).
6 {Black}/{Colour}
Note:
L The file formats that can be printed are as follows:
– TIFF
– JPEG
– PDF (Image type only. Such as files scanned
from the unit, files scanned from the computer
using Quick Image Navigator/Multi-Function
Viewer, or received fax documents saved in a
folder on an FTP server.)
L Only file names are displayed in the list.
L To stop printing, see page 79.
33
3. Printer
6 Close the web browser.
3.4 Printing a received e-mail
attachment automatically (LAN
connection only)
If you configure the POP server settings beforehand, the
unit will automatically print files attached to an e-mail
that are sent from a compatible unit via the Internet
(scan to e-mail print). This is useful if you want to print
only attached files, without checking your e-mails.
Important:
L The unit does not print e-mail messages.
L The unit will only print attached files sent from a
compatible unit, which can send e-mails directly
(without using a computer).
L The attachment file formats that can be printed
are as follows:
– TIFF
– JPEG
– PDF (Image type only. Such as files scanned
from the unit, files scanned from the
computer using Quick Image Navigator/MultiFunction Viewer, or received fax documents
saved as an e-mail attachment.)
L Received e-mails and the attached files will be
deleted automatically after printing.
A
B
C
A Send from a compatible multi-function unit (example:
“4.1.5 Scan to e-mail server (LAN connection only)”,
page 36)
B E-mail is sent via the Internet (e-mail server)
C Receiving unit prints attached files
1 Start Multi-Function Station.
2 [Utilities] i [Configuration Web Page] i
[Network Configuration]
3 Type “root” as the user name, then enter the
password (feature #155 on page 59). i [OK]
4 Click the [Scan to E-Mail Print] tab.
5 Set each item.
To activate this feature:
Select [Enabled] next to [Scan to E-Mail Print].
i [Submit]
To set the e-mail server information:
1. Click [Edit] next to [E-Mail Server].
2. Enter the e-mail server and POP server
information. i [Submit]
34
Note:
L Printing will not stop even if you press {Stop}.
L This feature can be programmed only through the
web browser interface (page 58).
L To view the recent scan to e-mail print information,
click [List] next to [E-Mail Print Log] (page 77).
L If the attached file is too large or is in an unsupported
format, it will not be printed properly.
L You can change the e-mail checking interval (page
77) or header print setting (page 77).
L Consult your service provider or network
administrator for details.
4. Scanner
4 Scanner
Scanner
4.1 Scanning from the unit (Push
Scan)
You can easily scan the document by using the operation
panel on the unit. You can select one of the following
scanning modes depending on how you intend to use
the scanned image.
– Viewing using Quick Image Navigator*1/MultiFunction Viewer*2 (Viewer)
– Saving as a file to your computer (File)
– Sending as an attached file to e-mail destination from
your computer (E-mail)
– Using OCR software (OCR)
– Sending as an attached file to e-mail destination
directly from your server (E-mail server)
– Sending to an FTP server (FTP)
– Saving to an SD card (SD card)
*1 For Windows 2000/Windows XP/Windows Vista
users
*2 For Windows 98/Windows Me users
Note:
L You can hold the previous scan settings (feature
#494 on page 71).
L To select the scan type for monochrome scanning
(black/white or greyscale), set the desired type
beforehand (feature #495 on page 71).
L When scanning a document, we recommend using
the scanner glass rather than the automatic
document feeder for better results.
L Do not open the document cover when scanning a
document with the automatic document feeder.
{Scan}
4. For USB connection:
Press {V} or {^} repeatedly to select “USB Host”.
i {Set}
For LAN connection:
Press {V} or {^} repeatedly to select the computer to
which you want to send the scanned image. i
{Set}
5. Press {V} or {^} repeatedly to select “Viewer”. i
{Set}
6. If necessary, change the scanning settings. Press
{V} or {^} repeatedly to select the desired setting,
then press {<} or {>}. i {Set}
7. {Black}/{Colour}
L The scanned image will be displayed in the
[Quick Image Navigator] window after
scanning.
Note:
L To stop scanning, see page 79.
L You can save the images in TIFF, JPEG, BMP or PDF
formats.
L You can set the desired scan mode for scanning to
your computer beforehand (feature #493 on page
71).
L The scanned image will be automatically saved in the
folder selected in the [Settings] window (page 27).
For Windows 98/Windows Me users
1. Set the original (page 20).
2. {Scan}
3. Press {V} or {^} repeatedly to select “PC”. i {Set}
4. For USB connection:
Press {V} or {^} repeatedly to select “USB Host”.
i {Set}
For LAN connection:
Press {V} or {^} repeatedly to select the computer to
which you want to send the scanned image. i
{Set}
5. Press {V} or {^} repeatedly to select “Viewer”. i
{Set}
6. If necessary, change the scanning settings. Press
{V} or {^} repeatedly to select the desired setting,
then press {<} or {>}. i {Set}
{Black} {Colour}{Stop}
{Set}{V}{^}{<}{>}
4.1.1 Scan to Viewer
For Windows 2000/Windows XP/Windows Vista
users
1. Set the original (page 20).
2. {Scan}
3. Press {V} or {^} repeatedly to select “PC”. i {Set}
7. {Black}/{Colour}
L The scanned image will be displayed in the
[Multi-Function Viewer] window after scanning.
However, when you select PDF as a file format,
the software that is associated to open PDF file
will start.
Note:
L To stop scanning, see page 79.
L You can save the images in TIFF, JPEG, BMP or PDF
formats.
L You can set the desired scan mode for scanning to
your computer beforehand (feature #493 on page
71).
35
4. Scanner
L The scanned image will be automatically saved in the
folder selected in the [Settings] window (page 27).
4.1.2 Scan to save as a file
1 Set the original (page 20).
2 {Scan}
3 Press {V} or {^} repeatedly to select “PC”. i
{Set}
4 For USB connection:
Press {V} or {^} repeatedly to select “USB Host”.
i {Set}
For LAN connection:
Press {V} or {^} repeatedly to select the computer to
which you want to send the scanned image. i
{Set}
5 Press {V} or {^} repeatedly to select “File”. i
{Set}
6 If necessary, change the scanning settings. Press
{V} or {^} repeatedly to select the desired setting,
then press {<} or {>}. i {Set}
7 {Black}/{Colour}
L The scanned image will be automatically saved
in the folder selected in the [Settings] window.
To change the folder, see page 27.
Note:
L To stop scanning, see page 79.
L You can save the images in TIFF, JPEG, BMP or PDF
formats.
L You can set the desired scan mode for scanning to
your computer beforehand (feature #493 on page
71).
4.1.3 Scan to E-mail
You can send the scanned image as an e-mail
attachment using e-mail software on your computer.
1 Set the original (page 20).
2 {Scan}
3 Press {V} or {^} repeatedly to select “PC”. i
{Set}
4 For USB connection:
Press {V} or {^} repeatedly to select “USB Host”.
i {Set}
For LAN connection:
Press {V} or {^} repeatedly to select the computer to
which you want to send the scanned image. i
{Set}
L The e-mail software will automatically start and
the scanned image will be attached to a new email message.
Note:
L To select the default e-mail software, see page 27.
L To stop scanning, see page 79.
L You can save the images in TIFF, JPEG or PDF
formats.
L You can set the desired scan mode for scanning to
your computer beforehand (feature #493 on page
71).
L The scanned image will be automatically saved in the
folder selected in the [Settings] window (page 27).
4.1.4 Scan to OCR
With OCR software, you can convert an image into text
data that can be edited with word processing software.
Readiris OCR software can be installed when installing
Multi-Function Station.
1 Set the original (page 20).
2 {Scan}
3 Press {V} or {^} repeatedly to select “PC”. i
{Set}
4 For USB connection:
Press {V} or {^} repeatedly to select “USB Host”.
i {Set}
For LAN connection:
Press {V} or {^} repeatedly to select the computer to
which you want to send the scanned image. i
{Set}
5 Press {V} or {^} repeatedly to select “OCR”. i
{Set}
6 If necessary, change the scanning settings. Press
{V} or {^} repeatedly to select the desired setting,
then press {<} or {>}. i {Set}
7 {Black}/{Colour}
L The scanned image will be displayed in the OCR
window after scanning.
Note:
L To stop scanning, see page 79.
L You can save the images in TIFF, JPEG or BMP
formats.
L For detailed instructions about OCR, select [Help].
L You can set the desired scan mode for scanning to
your computer beforehand (feature #493 on page
71).
L The scanned image will be automatically saved in the
folder selected in the [Settings] window (page 27).
5 Press {V} or {^} repeatedly to select “E-Mail”. i
{Set}
6 If necessary, change the scanning settings. Press
{V} or {^} repeatedly to select the desired setting,
then press {<} or {>}. i {Set}
7 {Black}/{Colour}
36
4.1.5 Scan to e-mail server (LAN
connection only)
You can send the scanned image as an attachment
without using e-mail software.
4. Scanner
Important:
L Program the e-mail server, SMTP server settings
(page 71) and the e-mail destinations (page 71)
beforehand.
1 Set the original (page 20).
2 {Scan}
3 Press {V} or {^} repeatedly to select “E-Mail
Server”. i {Set}
4 Enter the destination e-mail address.
Using navigator key:
Press {V}, {^}, {<} or {>} repeatedly to select the
desired destination.
Using dial keypad:
1. Press {V} or {^} repeatedly to select
“Temporary Address”. i {Set}
2. Enter the e-mail address using the dial keypad
(page 78).
5 {Set}
6 If necessary, change the scanning settings. Press
{V} or {^} repeatedly to select the desired setting,
then press {<} or {>}. i {Set}
7 {Black}/{Colour}
L The scanned image will be sent as an
attachment via an e-mail server.
Note:
L You can search for an e-mail address by initial.
Example: “Lisa”
1. Perform steps 1 to 3 on “4.1.5 Scan to e-mail
server (LAN connection only)”, page 36.
2. Press {5} repeatedly to display any name with
the initial “L” (see page 78 for character entry).
L To search for symbols, press {*}.
3. Press {V}, {^}, {<} or {>} repeatedly to select
“Lisa”.
L To stop the search, press {Stop}.
L To stop scanning, see page 79.
L You can save the images in TIFF, JPEG or PDF
formats.
4 Press {V} or {^} repeatedly to select the destination
to which you want to send the scanned image. i
{Set}
5 If necessary, change the scanning settings. Press
{V} or {^} repeatedly to select the desired setting,
then press {<} or {>}. i {Set}
6 {Black}/{Colour}
L The scanned image will be saved in the folder on
the FTP server.
Note:
L To stop scanning, see page 79.
L You can save the images in TIFF, JPEG or PDF
formats.
L To print scanned images, see page 33 for details.
4.1.7 Scan to SD card
You can save scanned images to an SD card.
1 Insert the SD card in the SD card slot of the unit
(page 81).
L An SD card is not supplied.
2 Set the original (page 20).
3 {Scan}
4 Press {V} or {^} repeatedly to select “SD Card”.
i {Set}
L “SD Card” is displayed only when the SD card is
inserted into the unit.
5 If necessary, change the scanning settings. Press
{V} or {^} repeatedly to select the desired setting,
then press {<} or {>}. i {Set}
6 {Black}/{Colour}
L The scanned image will be saved to the SD card.
Note:
L To stop scanning, see page 79.
L You can save the images in TIFF, JPEG or PDF
formats.
L To print scanned images, see page 31 for details.
L For details about the SD card, see page 80.
4.1.6 Scan to FTP server (LAN connection
only)
You can send the scanned image to a folder on an FTP
server.
Important:
L Program the FTP server settings beforehand
(page 72).
1 Set the original (page 20).
2 {Scan}
3 Press {V} or {^} repeatedly to select “FTP
Server”. i {Set}
37
4. Scanner
4.2 Scanning from a computer
(Pull Scan)
Note:
L When scanning a document, we recommend using
the scanner glass rather than the automatic
document feeder for better results.
L Do not open the document cover when scanning a
document with the automatic document feeder.
4.2.1 Using Multi-Function scan
application
By clicking an application icon, the selected application
starts automatically after scanning.
1 Set the original (page 20).
2 Start Multi-Function Station. i [Scan]
3 Click the desired application icon.
L When you click [Custom], the pre-programmed
application starts.
L To cancel scanning while the documents is being
scanned, click [Cancel].
Note:
L You can change the scanning settings beforehand for
each application (page 27).
L When you point to an application icon, the scanning
settings for that application are displayed as a tooltip.
L The scanned image will be automatically saved in the
folder selected in the [Settings] window (page 27).
4.2.2 Using Viewer
For Windows 2000/Windows XP/Windows Vista
users
1. Set the original (page 20).
2. Start Multi-Function Station.
3. [Utilities] i [Viewer]
L [Quick Image Navigator] will appear.
4. Click the [Acquire Image to Import Folder...] icon
in the [Quick Image Navigator] window.
L The unit’s name dialogue box will appear.
5. If necessary, change the scanning settings on your
computer.
L To preview the scanned image, click [Preview].
You can drag the frame to specify the scanning
area. If you change the scan settings, click
[Preview] to refresh the scanned image.
If you use the automatic document feeder, only
the first page will be previewed. When you need
to refresh the scanned image, set the document
to preview again.
6. [Scan]
L If you preview the scanned image using the
automatic document feeder in step 5, set the
document again and click [Scan].
38
L The scanned image will be displayed in the
[Quick Image Navigator] window after
scanning.
L To save the scanned image, select [Save As...]
from the [File] menu.
L To cancel scanning while the document is being
scanned, click [Cancel].
Note:
L You can display images in applications that support
TIFF, JPEG, PDF, PNG and BMP formats.
L You can save images in TIFF, JPEG, BMP, PNG or
PDF formats.
L If the [Select...] button is displayed in [Target
Device], click [Select...] to select the unit from the
list, and then click [OK].
The [Select...] button will not be displayed when
there is only one printer driver installed.
L You can move, copy and delete a file or page.
For Windows 98/Windows Me users
1. Set the original (page 20).
2. Start Multi-Function Station.
3. [Utilities] i [Viewer]
L [Multi-Function Viewer] will appear.
4. Click the [Scan] icon in the [Multi-Function
Viewer] window.
L The unit’s name dialogue box will appear.
5. If necessary, change the scanning settings on your
computer.
L To preview the scanned image, click [Preview].
You can drag the frame to specify the scanning
area. If you change the scan settings, click
[Preview] to refresh the scanned image.
If you use the automatic document feeder, only
the first page will be previewed. When you need
to refresh the scanned image, set the document
to preview again.
6. [Scan]
L If you preview the scanned image using the
automatic document feeder in step 5, set the
document again and click [Scan].
L The scanned image will be displayed in the
[Multi-Function Viewer] window after scanning.
L To save the scanned image, select [Save As ...]
from the [File] menu.
L To cancel scanning while the document is being
scanned, click [Cancel].
Note:
L You can display images in applications that support
TIFF, JPEG, PCX, DCX and BMP formats.
L You can save images in TIFF, JPEG, PCX, DCX,
BMP or PDF formats.
L If the [Select...] button is displayed in [Target
Device], click [Select...] to select the unit from the
list, and then click [OK].
The [Select...] button will not be displayed when
there is only one printer driver installed.
4. Scanner
L You can move, copy and delete a file or page.
4.2.3 Using other applications
Multi-Function Station includes a TWAIN and WIA
compliant scanner driver. You can also scan using other
applications that support TWAIN or WIA scanning. For
scanning example, proceed as follows:
1 Set the original (page 20).
2 Start an application that supports TWAIN or WIA
scanning.
3 For TWAIN scanning:
Select [Acquire Image...] from the [File] menu.
For WIA scanning:
Select [From Scanner or Camera...] from the
[File] menu.
L The unit’s name dialogue box will appear.
4 If necessary, change the scanning settings on your
computer. i [Scan]
L The scanned image will be displayed in the
application window after scanning.
L To cancel scanning while the document is being
scanned, click [Cancel].
Note:
L Scanning from WIA compliant applications is only
available for Windows XP and Windows Vista, and
via a USB connection.
L Depending on the application used, the appearance
may differ slightly.
L If the [Select...] button is displayed in the [Target
Device] when performing TWAIN scanning, click
[Select...] to select the unit from the list, then click
[OK].
The [Select...] button will not be displayed when
there is only one printer driver installed.
39
5. Copier
5 Copier
Copy
5.1 Making a copy
5.1.1 Using the scanner glass
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
1. Press {V} or {^} repeatedly to select “Contrast”.
2. Press {<} or {>}. i {Set}
{Copy}
Note:
L You can hold the previous contrast setting (feature
#462 on page 67).
To select the resolution
1. Press {V} or {^} repeatedly to select
“Resolution”.
{Black} {Colour}
{Set}{V}{^}{<}{>}
{Stop}
{Fax Auto Answer}
1 If the {Copy} light is OFF, turn it ON by pressing
{Copy}.
2 Set the original (page 20).
3 If necessary, change the copy settings according to
the type of document.
L To change the number of copies, see page 40.
L To select the contrast, see page 40.
L To select the resolution, see page 40.
L To select the zoom rate, see page 40.
4 {Black}/{Colour}
L If the copy input tray select (feature #471 on page
67) is activated, select the desired recording
paper size by pressing {<} or {>} repeatedly,
then press {Black}/{Colour} again.
L The unit will start copying.
5 After you finish copying, press {Stop} to reset the
settings you set in step 3.
Note:
L To stop copying, see page 79.
L You can change the default operation mode (feature
#463 on page 61) and the timer before returning to
the default operation mode (feature #464 on page
61).
L If the {Fax Auto Answer} light is ON, the unit can
receive faxes automatically even when in the copy
mode.
To change the number of copies
1. Press {V} or {^} repeatedly to select “Copies”.
2. Enter the number of copies (up to 99).
3. {Set}
40
2. Press {<} or {>} repeatedly to select the desired
resolution.
– “Text/Photo”: For both text and photographs.
– “Text”: For text only.
– “Photo”: For photographs, shaded drawings,
etc.
3. {Set}
Note:
L You can change the default resolution (feature #461
on page 67).
To select zoom rate (enlargement / reduction)
1. Press {V} or {^} repeatedly to select “Zoom”.
2. Press {<} or {>} repeatedly to select the zoom rate
that fits the size of your document and recording
paper.
– “100%”
– “50%”
– “200%”
L You can enter the desired percentage from
“25%” to “400%” specifically by using the dial
keys.
L Additional zoom rates can be selected according
to the recording paper size setting (feature #380
on page 60 or feature #382 on page 60).
Feature #380/#382 setting
Additional zoom rate
“Letter”
“A4→Letter”
“Legal→Letter”
“A4”
“Letter→A4”
“Legal→A4”
“Legal”
–
3. {Set}
Note:
L Zoom copy is not available for the following features:
– Quick ID copy feature (page 42)
– Easy repeat feature (page 42)
– Poster feature (page 43)
– N in 1 feature (page 43)
– Separate N in 1 feature (page 43)
5. Copier
– Booklet feature (page 44)
L You can hold the previous zoom setting (feature #468
on page 67).
L When using the scanner glass, the unit will only
enlarge the right top corner of the document starting
from the m mark on the unit.
L When using the automatic document feeder, the
unit will only enlarge the centre of the upper part of
the document. To make an enlarged copy of the
bottom of the document, turn the document around,
and then make a copy.
Example: 150 % enlarged copy
Using the scanner glass (1):
Original document
Enlarged copy
5.1.2 Using the automatic document feeder
{Copy}
{Stop}
{<}{>} {Black}
{Colour}
1 If the {Copy} light is OFF, turn it ON by pressing
{Copy}.
2 Set the original (page 21).
3 If necessary, change the copy settings according to
1
Using the automatic document feeder:
Original document
Enlarged copy
the type of document.
L To change the number of copies, see page 40.
L To select the contrast, see page 40.
L To select the resolution, see page 40.
L To select the zoom rate, see page 40.
4 {Black}/{Colour}
L If the copy input tray select (feature #471 on page
67) is activated, select the desired recording
paper size by pressing {<} or {>} repeatedly,
then press {Black}/{Colour} again.
L The unit will start copying.
Example: 70 % reduced copy
Using the scanner glass (1):
Original document
5 After you finish copying, press {Stop} to reset the
settings you set in step 3.
Reduced copy
Note:
L To stop copying, see page 79.
1
Using the automatic document feeder:
Original document
Reduced copy
41
5. Copier
“5.2.1 Collate copy”, page 42). The unit will make 1 set of
a collated copy and stop temporarily so you can check
whether the copy was made as you expected. If the copy
is correct, press {Black}/{Colour} to continue copying.
If the copy is not correct, press {Stop} and start again
from the beginning.
5.2 More copying features
L Make sure that the {Copy} light is ON.
5.2.1 Collate copy
The unit can collate multiple copies in the same order as
the original document pages.
1
2
3
4
5
6
Set the original (page 20).
Press {V} or {^} repeatedly to select “Copies”.
Enter the number of copies (up to 99). i {Set}
{Advance}
Press {V} or {^} repeatedly to select “Collate”.
Press {<} or {>} repeatedly to select “On”. i
{Set} i {Advance}
7 When using the scanner glass:
When using the automatic document feeder:
{Black}/{Colour}
8 After you finish copying, press {Stop} to reset this
feature.
Example: Making 2 copies of a 4-page original
document
4
3
4
2
4
1
3
3
2
4
1
Collated pages
2
1
1
Uncollated pages
Note:
L The unit will store the documents into memory while
collating the copies. If memory becomes full while
storing, the unit will only print out the stored pages.
L You can hold the previous collate setting (feature
#469 on page 67).
Proof set feature
To make 1 set of a collated copy first, press {<} or {>}
repeatedly to display “Proof Set” (step 6 on
42
Note:
L The copied documents will not be reduced to fit the
recording paper, and useful for copying small sized
documents such as business cards.
Layout”. i {<}/{>}
2. Place the next document on the scanner glass
and press {Set}. Repeat this until you have
scanned all pages, and then press
{Black}/{Colour}.
L The unit will start copying.
3
Quick ID copy feature: To copy 2-sided documents
onto one page.
Easy repeat feature: To copy a single document
repeatedly onto one page.
1 Press {V} or {^} repeatedly to select “Page
1. {Black}/{Colour}
L The unit will scan 1 page.
2
5.2.2 Quick ID copy feature / Easy repeat
feature (Scanner glass only)
2 Press {V} or {^} repeatedly to select “Quick ID
Copy” or “Easy Repeat”. i {Set}
3 Press {V} or {^} repeatedly to select the desired
page layout.
Quick ID copy feature:
– “2 in 1 (Landscape)”
– “2 in 1 (Portrait)”
– “4 in 1 (Landscape)”
– “4 in 1 (Portrait)”
– “8 in 1 (Landscape)”
– “8 in 1 (Portrait)”
Easy repeat feature:
– “2 in 1”
– “4 in 1”
– “8 in 1”
4 Set the original (page 20).
L To make a landscape copy, set the original in
landscape direction. To make a portrait copy, set
the original in portrait direction.
L The scanning area changes according to the
selected setting in step 3. Follow the on-screen
instructions.
5 {Set}
6 If necessary, enter the number of copies (page 40).
L Other copy settings are also available. See page
40 for details.
7 Quick ID copy feature:
1. {Black}/{Colour}
L The unit will scan 1 page.
2. Place the next document on the scanner glass
and press {Set}. Repeat this until all the
documents are scanned.
L The unit will start copying.
5. Copier
L You can press {Black}/{Colour} anytime to
start copying.
Easy repeat feature:
{Black}/{Colour}
8 After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous page layout setting
(feature #467 on page 67).
5.2.3 Poster feature (Scanner glass only)
You can make copies divided into 4 (“2×2”) or 9 (“3×3”)
sections to make enlarged copies of the individual
sections. You can then glue them together to make a
poster.
1 Set the original (page 20).
2 Press {V} or {^} repeatedly to select “Page
Layout”. i {<}/{>}
3 Press {V} or {^} repeatedly to select “Poster”. i
{Set}
4 Press {V} or {^} repeatedly to select “2×2” or
“3×3”. i {Set}
5 If necessary, enter the number of copies (page 40).
L Other copy settings are also available. See page
40 for details.
6 {Black}/{Colour}
7 After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous page layout setting
(feature #467 on page 67).
5.2.4 N in 1 feature
You can save paper by copying 2, 4 or 8 pages onto 1
page. The documents will be reduced to fit the recording
paper.
1 Set the original (page 20).
L To make a portrait copy, set the original in portrait
direction. To make a landscape copy, set the
original in landscape direction.
2 Press {V} or {^} repeatedly to select “Page
Layout”. i {<}/{>}
3 Press {V} or {^} repeatedly to select “N in 1”. i
5 {Set}
6 If necessary, enter the number of copies (page 40).
L Other copy settings are also available. See page
40 for details.
7 When using the scanner glass:
1. {Black}/{Colour}
L The unit will scan 1 page.
2. Place the next document on the scanner glass
and press {Set}. Repeat this until all the
documents are scanned.
L The unit will start copying.
L You can press {Black}/{Colour} anytime to
start copying.
When using the automatic document feeder:
{Black}/{Colour}
8 After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous page layout setting
(feature #467 on page 67).
Separate N in 1 feature (Scanner glass only)
You can separate an N in 1 copied document back into
its original, separate pages. This feature is available for
documents created using the “2 in 1” and “4 in 1”
settings.
1. Set the original (page 20).
2. Press {V} or {^} repeatedly to select “Page
Layout”. i {<}/{>}
3. Press {V} or {^} repeatedly to select “Separate N
in 1”. i {Set}
4. Press {V} or {^} repeatedly to select the desired
page layout.
– “2 in 1 (Portrait)”
– “2 in 1 (Landscape)”
– “4 in 1 (Portrait)”
– “4 in 1 (Landscape)”
5. {Set}
6. If necessary, enter the number of copies (page 40).
L Other copy settings are also available. See page
40 for details.
7. {Black}/{Colour}
8. After you finish copying, press {Stop} to reset this
feature.
{Set}
4 Press {V} or {^} repeatedly to select the desired
page layout.
– “2 in 1
– “2 in 1
– “4 in 1
– “4 in 1
– “8 in 1
– “8 in 1
(Portrait)”
(Landscape)”
(Portrait)”
(Landscape)”
(Portrait)”
(Landscape)”
5.2.5 Copy reservation
You can make a copy reservation under the following
conditions:
– while the unit is printing documents from your
computer.
– while the unit is printing received fax documents.
– while the unit is performing direct printing.
1 Set the original (page 20).
43
5. Copier
2 While “PC Printing”, “Printing” or
“Loading” is displayed, press {Copy}.
3 Make necessary settings such as number of copies,
resolution, zoom features and page layout features
(page 40). i {Black}/{Colour}
L “Copy Reserved” will be displayed. The unit
will start copying after the current printing job.
–
–
–
–
“Left Binding(1)”
“Left Binding(All)”
“Right Binding(1)”
“Right Binding(All)”
L “(1)”: To print 4 documents as separate blocks.
L “(All)”: To print all documents as 1 block
(monochrome printing only).
5. {Set}
5.2.6 Duplex copy (optional)
You can make a duplex copy if the optional automatic
duplex unit is connected (page 82). This allows you to
make 2-sided copies of 1-sided documents.
1
2
3
4
Set the original (page 20).
{Advance}
Press {V} or {^} repeatedly to select “Duplex”.
Press {<} or {>} repeatedly to select the desired
binding.
– “Long Edge”
– “Short Edge”
L Select “Off” to deactivate this feature.
5 {Set} i {Advance}
6 If necessary, enter the number of copies (page 40).
L Other copy settings are also available. See page
40 for details.
7 When using the scanner glass:
1. {Black}/{Colour}
L The unit will scan 1 page.
2. Place the next document on the scanner glass
and press {Set}.
L The unit will start copying.
When using the automatic document feeder:
{Black}/{Colour}
8 After you finish copying, press {Stop} to reset this
feature.
Note:
L Duplex copy is not available for the quick ID copy
feature (page 42), easy repeat feature (page 42) or
poster feature (page 43).
L You can save the previous duplex setting (feature
#470 on page 67).
Booklet feature
You can make copies, and then fold them in half to create
booklets. The documents will be reduced to fit the
recording paper.
1. Set the original (page 20).
2. Press {V} or {^} repeatedly to select “Page
Layout”. i {<}/{>}
3. Press {V} or {^} repeatedly to select “Booklet”.
i {Set}
4. Press {V} or {^} repeatedly to select the desired
binding direction and pages.
44
6. If necessary, enter the number of copies (page 40).
L Other copy settings are also available. See page
40 for details.
L Multiple copies will be collated automatically.
7. When using the scanner glass:
1. {Black}/{Colour}
L The unit will scan 1 page.
2. Place the next page on the scanner glass and
press {Set}. Repeat this until you have scanned
all pages.
3. If “Left Binding(1)” or “Right
Binding(1)” is selected in step 4, the unit will
start copying.
L You can press {Black}/{Colour} anytime to
start copying.
L For multiple copies, press {Black}/{Colour}
to start copying.
If “Left Binding(All)” or “Right
Binding(All)” is selected in step 4, press
{Black} to start copying.
When using the automatic document feeder:
{Black}/{Colour}
8. After you finish copying, press {Stop} to reset this
feature.
Note:
L If “Left Binding(All)” or “Right
Binding(All)” is selected in step 4, only
monochrome copy is available, so press {Black} in
step 7. If you press {Colour}, steps 2 to 6 will be
reset.
L You can save the previous page layout setting
(feature #467 on page 67).
6. Fax
6 Fax
Sending
Faxes
6.1 Sending a fax manually
Important:
L You can only send faxes in monochrome.
6.1.1 Using the scanner glass
By using the scanner glass, you can send a page from
booklets or small size paper that cannot be sent with the
automatic document feeder.
To select the resolution
1. Press {V} or {^} repeatedly to select
“Resolution”.
2. Press {<} or {>} repeatedly to select the desired
resolution. i {Set}
– “Standard”: For normal-sized characters.
– “Fine”: For small-sized characters.
– “Super Fine”: For very small-sized characters.
– “Photo”: For photographs, shaded drawings,
etc.
L Using the “Fine”, “Super Fine” and “Photo”
settings will increase transmission time.
{Fax}
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
1. Press {V} or {^} repeatedly to select “Contrast”.
2. Press {<} or {>}. i {Set}
{Black} {Redial}
{Set}{V}{^}{<}{>}
1 If the {Fax} light is OFF, turn it ON by pressing
{Fax}.
2 Set the original (page 20).
3 If necessary, change the resolution and contrast
according to the type of document.
L To select the resolution, see page 45.
L To select the contrast, see page 45.
4 Dial the fax number.
L To send a single page, go to step 7.
L To send multiple pages, go to the next step.
5 Press {V} or {^} repeatedly to select “Quick
Scan”, then press {<} or {>} repeatedly to select
“On”. i {Black}
L Wait until “Scan: Press <Set>.” “Send:
Press <Start>.” is displayed.
L Press {<} or {>} repeatedly to change the
resolution during scanning, and then press
{Set}. The setting will be applied starting with the
next page.
6 Place the next page on the scanner glass. i {Set}
L To send more pages, repeat this step.
7 {Black}
Note:
L To stop sending, see page 79.
L You can change the default operation mode (feature
#463 on page 61) and the timer before returning to
the default operation mode (feature #464 on page
61).
To redial the last number
{Redial}
L If the line is busy, the unit will automatically redial the
number 1 time.
Note:
L To stop sending, see page 79.
Reserving the fax transmission (Dual Access)
You can reserve a fax transmission even when the unit is
just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory
transmission.
2. Enter the fax number using the dial keypad or
navigator directory.
3. When using the scanner glass:
1. {Black}
L The unit will scan 1 page.
2. Place the next document on the scanner glass.
i {Set}
L Repeat this until all the documents are
scanned.
3. {Black}
When using the automatic document feeder:
{Black}
L If the document exceeds the memory capacity,
transmission will be cancelled. You must send the
entire document manually.
Printing a confirmation report
A confirmation report provides you with a printed record
of transmission results. To print confirmation reports,
45
6. Fax
make sure feature #401 is activated (page 62). For an
explanation of error messages, see page 84.
Printing a journal report
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see page 108.
To print it automatically after every 30 new fax
transmissions and receptions, make sure feature #402 is
activated (page 62). For an explanation of error
messages, see page 84.
6.2 Storing items for the
navigator directory
The unit provides a navigator directory (300 items).
{Menu}
{Stop}
6.1.2 Using the automatic document feeder
{Fax}
{V}{^}{<}{>} {Set}
6.2.1 Storing navigator directory items
1 {Menu}
2 Press {V} or {^} repeatedly to select “Directory
Set”.
{Monitor}{Black}
{V}{^}{<}{>}
3 Press {<} or {>} repeatedly to select “New
Addition”. i {Set}
4 Enter the name, up to 20 characters (see page 78 for
1 If the {Fax} light is OFF, turn it ON by pressing
{Fax}.
2 Set the original (page 21).
3 If necessary, change the resolution and contrast
according to the type of document.
L To select the resolution, see page 45.
L To select the contrast, see page 45.
4 {Monitor}
5 Dial the fax number. i {Black}
Note:
L To stop sending, see page 79.
L Do not open the document cover when sending a fax
with the automatic document feeder.
Pre-dialing a fax number
1. Enter the fax number.
2. Set the original (page 21). i {Black}
Sending from memory (Quick scan feature)
1. Set the original (page 21).
2. Enter the fax number.
3. Press {V} or {^} repeatedly to select “Quick
Scan”, then press {<} or {>} repeatedly to select
“On”. i {Black}
character entry). i {Set} i {V}/{^}
5 Enter the telephone number, up to 32 digits. i
{Set} i {Set}
L To program other items, repeat steps 4 to 5.
6 {Menu}
Note:
L A hyphen or a space entered in a telephone number
counts as 2 digits.
6.2.2 Editing a stored item
1 {Menu}
2 Press {V} or {^} repeatedly to select “Directory
Set”.
3 Press {<} or {>} repeatedly to select “Edit”. i
{Set}
4 Press {V}, {^}, {<} or {>} repeatedly to select the
desired item. i {Set}
5 Edit the name if necessary. i {Set} i {V}/{^}
6 Edit the telephone number if necessary. i {Set}
i {Set} i {Menu}
6.2.3 Erasing a stored item
1 {Menu}
2 Press {V} or {^} repeatedly to select “Directory
Set”.
3 Press {<} or {>} repeatedly to select “Edit”. i
{Set}
46
6. Fax
4 Press {V}, {^}, {<} or {>} repeatedly to select the
desired item. i {#}
L To cancel erasing, press {Stop}, then press
{Menu}.
5 {Set} i {Menu}
6.3 Sending a fax using navigator
directory
Before using this feature, store the desired names and
telephone numbers into the navigator directory (page
46).
L Make sure that the {Fax} light is ON.
6.3.1 Using the scanner glass
1 Set the original (page 20).
2 Press {<} or {>} to initiate the navigator directory.
3 Press {V}, {^}, {<} or {>} repeatedly to select the
desired item. i {Set}
4 If necessary, change the resolution (page 45) and
the contrast (page 45).
L To send a single page, go to step 7.
L To send multiple pages, go to the next step.
5 Press {V} or {^} repeatedly to select “Quick
Scan”, then press {<} or {>} repeatedly to select
“On”. i {Black}
6 Place the next page. i {Set}
L To send more pages, repeat this step.
7 {Black}
To search for a name by initial
Example: “Lisa”
1. Press {<} or {>} to initiate the navigator directory.
2. Press {5} repeatedly to display any name with the
initial “L” (see page 78 for character entry).
L To search for symbols, press {*}.
3. Press {V}, {^}, {<} or {>} repeatedly to select
“Lisa”.
L To stop the search, press {Stop}.
Fax auto redial
If the line is busy or if there is no answer, the unit will
automatically redial the number 1 time.
Note:
L To stop sending, see page 79.
6.3.2 Using the automatic document feeder
1 Set the original (page 21).
2 Enter the fax number using navigator directory.
3 If necessary, change to the desired resolution (page
45) and the desired contrast (page 45).
4 {Black}
47
6. Fax
6.4 Broadcast transmission
You can send the same document to multiple parties (up
to 20). To use this feature, store the fax numbers into
broadcast memory using the navigator directory (page
46).
Your programmed items will remain in the broadcast
memory, allowing frequent re-use.
6.4.1 Programming items into the
broadcast memory
1 {Menu}
2 Press {V} or {^} repeatedly to select “Directory
Set”.
3 Press {<} or {>} repeatedly to select
“Broadcast”. i {Set}
4 Press {V} or {^} repeatedly to select the desired
broadcast memory location (“<Broadcast1>” to
“<Broadcast5>”).
L When you do not wish to change the broadcast
memory name, press {<} or {>} and go to step
8.
5 Press {Set} to change the broadcast memory name.
6 {<}/{>} i Change the name, up to 20 characters
(see page 78 for character entry).
7 Press {Set} 2 times.
8 Press {V}, {^}, {<} or {>} repeatedly to select the
desired item. i {Set}
L The number in the upper right indicates the
number of registered items.
L To program other items, repeat this step (up to 20
items).
L If you have programmed the wrong item, press
{Set} again to remove “,” and cancel the
selected item.
9 {Back} i {Menu}
6.4.2 Adding a new item into the broadcast
memory
1 {Menu}
2 Press {V} or {^} repeatedly to select “Directory
Set”.
3 Press {<} or {>} repeatedly to select
“Broadcast”. i {Set}
4 Press {V} or {^} repeatedly to select the desired
broadcast memory location (“<Broadcast1>” to
“<Broadcast5>”). i {<}/{>} i {;}
L If you changed the broadcast memory name
when programming, select that name.
5 Press {V}, {^}, {<} or {>} repeatedly to select the
item that you want to add. i {Set}
48
L To add other items, repeat this step (up to 20
items).
6 {Back} i {Menu}
Note:
L When adding new items to the broadcast memory,
you can only select stored items.
6.4.3 Erasing a stored item from the
broadcast memory
1 {Menu}
2 Press {V} or {^} repeatedly to select “Directory
Set”.
3 Press {<} or {>} repeatedly to select
“Broadcast”. i {Set}
4 Press {V} or {^} repeatedly to select the desired
broadcast memory location (“<Broadcast1>” to
“<Broadcast5>”). i {<}/{>}
L If you changed the broadcast memory name
when programming, select that name.
5 Press {V}, {^}, {<} or {>} repeatedly to select the
item that you want to erase.
L To cancel erasing, press {Stop}, then press
{Menu}.
6 {#} i {Menu}
Note:
L If you erase all programmed items, the broadcast
memory name will return to the default name.
6.4.4 Sending the same document to preprogrammed parties
L Make sure that the {Fax} light is ON.
To send the same document using the scanner glass
1. Set the original (page 20).
2. Press {<} or {>} to initiate the navigator directory.
3. Press {V} or {^} repeatedly to select the desired
broadcast memory location. i {Set}
4. If necessary, change the resolution (page 45) and
the contrast (page 45). i {Black}
L To send a single page, go to step 6.
L To send multiple pages, go to the next step.
5. Place the next page. i {Set}
L To send more pages, repeat this step.
6. {Black}
Note:
L To stop sending, see page 79.
L If you select “Fine”, “Super Fine” or “Photo”
resolution, the number of pages that the unit can
send will decrease.
L If the document exceeds the memory capacity,
sending will be cancelled.
6. Fax
L If a party is busy or does not answer, it will be skipped
and redialed later 1 time.
L After transmission, the unit will automatically print a
report (broadcast sending report).
To send the same document using the automatic
document feeder
1. Set the original (page 21).
2. Press {<} or {>} to initiate the navigator directory.
3. Press {V} or {^} repeatedly to select the desired
broadcast memory location. i {Set}
4. If necessary, change the resolution (page 45) and
the contrast (page 45).
5. {Black}
6.5 Sending a computer
document as a fax message from
your computer
You can access the fax function from a Windows
application using Multi-Function Station.
For example, to send a document created from
WordPad, proceed as follows.
1 Open the document you want to send.
2 Select [Print...] from the [File] menu.
L The [Print] dialogue box will appear.
3 Select the PCFAX unit’s name as the active printer.
4 Click [Print] or [OK].
L The [Send a Fax] dialogue box will appear.
5 Enter the fax number using the keypad display or the
directory.
L To stop the operation, click [Cancel].
6 [Send]
L The document will be sent through the unit from
your computer.
Note:
L To stop sending, see page 79.
L If the document exceeds the memory capacity of the
unit, sending will be cancelled.
L For details, see the help file by selecting [p] from
Multi-Function Station.
L Click [Select...] to change the active unit.
49
6. Fax
Receiving Faxes
6.6 Receiving a fax automatically
– Auto answer ON
6.7 Receiving a fax manually –
Auto answer OFF
Important:
L You can only receive faxes in monochrome.
Important:
L Use this mode with an extension telephone.
L You can only receive faxes in monochrome.
6.6.1 Activating FAX ONLY mode
Press {Fax Auto Answer} repeatedly to display “Fax
Only Mode”.
L The display will show the ring count in FAX ONLY
mode. If you wish to change it, press {V} or {^}
repeatedly to display the desired setting, and press
{Set}.
L The {Fax Auto Answer} light turns ON.
{Set}{V}{^}
How faxes are received
When receiving calls, the unit will automatically answer
all calls and only receive fax documents.
Note:
L The number of rings before a call is answered in FAX
ONLY mode can be changed (feature #210 on page
60).
If you have subscribed to a Distinctive Ring service
See page 57.
6.7.1 Activating TEL mode
Set the unit to TEL mode by pressing {Fax Auto
Answer} repeatedly to display “Tel Mode”.
L The {Fax Auto Answer} light turns OFF.
Note:
L If you do not answer the call within 10 rings, the unit
will temporarily switch to fax reception. The other
party can then send a fax.
How to receive faxes with an extension telephone
If you have another telephone connected to the [EXT]
jack or the same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the handset
of the extension telephone.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*} {#} {9} (default fax activation code)
firmly.
3. Replace the handset.
Note:
L To stop receiving, see page 79.
L To receive fax documents using the extension
telephone, make sure remote fax activation is turned
ON (feature #434 on page 64) beforehand. The
default setting is OFF.
50
6. Fax
6.8 Displaying a received fax
document
You can display a received fax document on the unit.
You can print or save the necessary document after you
confirm the image.
Make sure the fax preview mode setting is turned ON
beforehand (feature #448 on page 65).
L Make sure that the {Fax} light is ON.
L Make sure that the unit is idle.
{Fax}
{Advance} {Set}
{Stop}
Keypad
Action
{4}
Returns to the previous page
(only available for multiple pages)
{6}
Goes to the next page (only
available for multiple pages)
{2}
Enlarges an image
{8}
Reduces an image
{5}
Rotates an image (90 °, 180 °,
270 °)
{^}{V}{<}{>}
Scrolls an image
6.8.2 Printing a fax document
1 {Advance}
2 Press {V} or {^} repeatedly to select “Fax
Preview”. i {Set}
{Back} {V}{^}{<}{>} {Black}
3 Press {V} or {^} repeatedly to select the desired fax
document. i {Black}
L The received fax document will be printed.
4 {Advance}
Note:
L You can delete the received fax document
automatically after printing (feature #449 on page
65).
6.8.3 Saving a fax document
Important:
L You can only receive faxes in monochrome.
6.8.1 Viewing a fax document
1 {Advance}
2 Press {V} or {^} repeatedly to select “Fax
Preview”. i {Set}
3 Press {V} or {^} repeatedly to select the desired fax
document. i {Set}
L The selected fax document will be displayed.
L To stop viewing, press {Back}.
L To print the fax document, press {Black}.
4 {Back} i {Advance}
Note:
L The display speed depends on the contents and size
of the document.
What “,” means
“,” on the display means the image has already been
viewed, printed or saved.
To adjust the image
The following keypad is used to adjust the image.
Important:
L When you save a fax document as an e-mail
attachment, program the e-mail server, SMTP
server settings (page 66) and the e-mail
destinations (page 66) beforehand.
L When you save the fax document in a folder on
an FTP server, program the FTP server settings
beforehand (page 66).
1 {Advance}
2 Press {V} or {^} repeatedly to select “Fax
Preview”. i {Set}
3 Press {V} or {^} repeatedly to select the desired fax
document. i {;}
4 Select the desired destination.
Saving to your computer:
1. Press {V} or {^} repeatedly to select “PC”. i
{Set}
2. Press {V} or {^} repeatedly to select “USB
Host” or the computer on which you want to
save the data. i {Set}
L The fax document will be automatically saved
in the folder selected in the [Settings]
window. To change the folder, see page 27.
L The software that is associated to open PDF
files will automatically start.
51
6. Fax
Saving as an e-mail attachment:
1. Press {V} or {^} repeatedly to select “E-Mail
Server”. i {Set}
2. Press {V}, {^}, {<} or {>} repeatedly to select
the destination e-mail address. i {Set}
L To enter the e-mail address using the dial
keypad, select “Temporary Address”.
L The fax document will be sent as an
attachment via an e-mail server.
Saving in a folder on an FTP server:
1. Press {V} or {^} repeatedly to select “FTP
Server”. i {Set}
2. Press {V} or {^} repeatedly to select the desired
FTP server. i {Set}
L The fax document will be saved in the folder
on the FTP server.
6.9 Using the unit with an
answering machine
6.9.1 Setting up the unit and an answering
machine
1 Connect the answering machine (1).
L An answering machine is not supplied.
L Remove the stopper (2) if attached.
2
Saving to an SD card:
1. Insert an SD card in the SD card slot of the unit
(page 81).
L An SD card is not supplied.
2. Press {V} or {^} repeatedly to select “SD
Card”. i {Set}
L If a file with the same name already exists on
the SD card, a message will appear (page
85).
L The fax document will be saved in a
predefined folder on the SD card (page 81).
5 {Advance}
Note:
L The received fax document is saved as an image file
(PDF format). Adobe Reader is required to view it.
L For details about the SD card, see page 80.
L To stop saving a fax document, see page 79.
6.8.4 Erasing a fax document
1 {Advance}
2 Press {V} or {^} repeatedly to select “Fax
Preview”. i {Set}
3 Press {V} or {^} repeatedly to select the desired fax
document. i {#}
L To cancel erasing, press {Stop}, then press
{Advance}.
4 {Set} i {Advance}
Note:
L To erase the fax document, you need to view or print
the data beforehand (page 51).
1
2 Set the number of rings on the answering machine to
4 rings or less.
L This will allow the answering machine to answer
the call first.
3 Record a greeting message on the answering
machine.
L We recommend you record a message that is
under 10 seconds long, and not to pause for
more than 4 seconds during the message.
Otherwise, neither machine will function
correctly.
4 Activate the answering machine.
5 Set the unit to the desired receiving mode (page 50).
L If you set it to FAX ONLY mode, change the ring
setting in FAX ONLY mode to “5 Rings”
(feature #210 on page 60).
6 Make sure each of the following is unique:
–
–
–
52
the remote access code of the answering
machine
the fax activation code (feature #434 on page 64)
remote access to your phone company’s Voice
Mail (if you subscribed)
6. Fax
Note:
L If the call is a phone call, the answering machine will
record voice messages.
If a fax calling tone is detected, the fax machine will
receive a fax automatically.
L Regarding the remote access code for the answering
machine, see the operating instructions of the
answering machine.
Receiving a voice message and fax document in one
call
The caller can leave a voice message and send a fax
document during the same call. Inform the caller of the
following procedure beforehand.
6.10 Junk fax prohibitor
(preventing fax reception from
undesired callers)
If you subscribe to Call Display service (page 55), this
feature prevents fax reception from calls that do not
show caller information.
Additionally, the unit will not accept faxes originating
from numbers that match the ones on a programmable
junk fax prohibitor list.
L Make sure that the {Fax} light is ON.
1. The caller calls your unit.
L The answering machine will answer the call.
Important:
L This feature does not work if you receive faxes
manually.
2. The caller can leave a message after the greeting
message.
6.10.1 Activating the junk fax prohibitor
3. The caller presses {*}{#}{9} (pre-selected fax
activation code).
L The unit will activate the fax function.
1 {Advance}
2 Press {V} or {^} repeatedly to select “Junk Fax
4. The caller presses the start button to send a
document.
3 Press {V} or {^} repeatedly to select
Note:
L To use this feature, make sure remote fax activation
is turned ON (feature #434 on page 64). The fax
activation code can also be changed.
L If there is no room left in the memory of your
answering machine, the unit may not be able to
receive documents. See the operating instructions of
the answering machine and erase unnecessary
messages.
Prohibitor”. i {Set}
“Prohibitor”.
4 Press {<} or {>} repeatedly to select “On”. i
{Set}
5 Press {Advance} to exit.
6.10.2 Storing undesired callers
You can register up to 20 undesired numbers from the
caller’s list (page 55) if you do not wish to receive faxes
from them.
1 {Advance}
2 Press {V} or {^} repeatedly to select “Junk Fax
Prohibitor”. i {Set}
3 Press {V} or {^} repeatedly to select “Junk List
Set”. i {Set}
4 Press {V} or {^} repeatedly to display the party you
do not want to receive faxes from. i {Set}
L If you have programmed the wrong item, press
{Set} again to remove “,” and cancel the item.
5 {Back} i {Advance}
To display the junk fax prohibitor list
1. {Advance}
2. Press {V} or {^} repeatedly to select “Junk Fax
Prohibitor”. i {Set}
3. Press {V} or {^} repeatedly to select “Junk List
Display”. i {Set}
4. Press {V} or {^} to display the items on the list.
5. Press {Advance} to exit.
To print the junk fax prohibitor list
1. {Advance}
53
6. Fax
2. Press {V} or {^} repeatedly to select “Junk Fax
Prohibitor”. i {Set}
3. Press {V} or {^} repeatedly to select “Junk List
Print”. i {Set}
4. Press {Advance} to exit.
To erase an item from the junk fax prohibitor list
1. {Advance}
2. Press {V} or {^} repeatedly to select “Junk Fax
Prohibitor”. i {Set}
3. Press {V} or {^} repeatedly to select “Junk List
Display”. i {Set}
4. Press {V} or {^} repeatedly to select the desired
item. i {#}
L To cancel erasing, press {Stop}, then press
{Advance}.
5. {Set} i {Advance}
6.11 Receiving a fax on your
computer
You can receive a fax document on your computer. The
received fax document is saved as an image file (TIFFG4 format).
To receive a fax document using your computer, make
sure the following features are set beforehand.
– PC fax reception (feature #442 on page 65)
– Computer setting for the PC fax reception (feature
#443 on page 24)
L Make sure the fax preview mode is turned OFF
beforehand (feature #448 on page 65).
1 Press {Fax Auto Answer} repeatedly to turn the
auto answer setting ON (page 50).
2 Start Multi-Function Station. i [PC FAX]
3 When a fax call is received, your computer will
receive a document through the unit.
Note:
L You can view, print or transfer the received document
using your computer.
Viewing a received document
1. Select [PC FAX] from Multi-Function Station.
2. Select [Received Log] in [Communication Log].
3. Click the item you want to view.
4. Click [File] in the menu bar, then select [View], or
click the [View] icon in the toolbar.
L The received fax will be displayed.
If a received fax document is stored in the unit’s
memory
You can load the document into your computer.
1. Select [PC FAX] from Multi-Function Station.
2. Select [Received Log] in [Communication Log].
3. Click [File] in the menu bar. i [Receive a Fax]
L If feature #442 is activated, the received fax
document will be automatically transferred to the
computer.
54
7. Call Display
7 Call
Call
Display
Display
7.1 Call Display service
This unit is compatible with the Call Display service
offered by your local telephone company. To use this
unit’s Call Display features, you must subscribe to a
Call Display service.
Make sure the following ring count is set to 2 or more
rings beforehand.
–
FAX ring count (feature #210 on page 60)
L The name display service may not be available in
some areas. For further information, please contact
your telephone company.
7.1.1 How Call Display is displayed
The calling party’s name or telephone number will be
displayed after the 1st ring. You have the option of
whether or not to answer the call.
The unit will automatically store caller information
(name, telephone number and date and time of the call)
from the 30 most recent calls. It is possible to view caller
information on the display (page 55) or print the entire
caller’s list (page 108).
L When caller information is received and it matches a
telephone number stored in the unit’s navigator
directory, the stored name will be displayed.
L If the unit is connected to a PBX (Private Branch
Exchange) system, caller information may not be
received properly. Consult your PBX supplier.
L If the unit cannot receive caller information, the
following will be displayed:
“Unavail Name&No”: The caller dialed from an
area which does not provide Call Display service.
“Private Caller”: The caller requested not to
send caller information.
“Long Distance”: The caller made a long distance
call.
To confirm caller information by printing the caller’s
list
– To print manually, see page 108.
– To print automatically after every 30 new calls,
activate feature #216 (page 60).
7.2 Viewing and calling back
using caller information
{Call Display} i Press {V} to search from the recently
received caller information.
L If you press {^}, the display order will be reversed.
L To send a fax, see page 45.
To change the way caller information is displayed
While displaying the desired caller information, press
{<} or {>} repeatedly to change name/telephone
number information.
7.2.1 Symbols and operations for caller
information
What “,” means
“,” on the display means the call has already been
highlighted or answered.
To stop viewing
Press {Stop}.
To edit a telephone number before calling
back/storing
While displaying a desired caller information, press {*}
repeatedly. Each time you press {*}, the telephone
number will be changed as follows:
A 1 – Area code – Local telephone number (“1” added)
B Local telephone number only (area code omitted)
C Area code – Local telephone number
D 1 – Local telephone number (“1” added and area code
omitted)
L To store the number in navigator directory, follow
from step 3 of the storing procedure on page 56.
55
7. Call Display
7.3 Erasing caller information
7.4 Storing caller information
7.3.1 Erasing all caller information
1 {Call Display}
2 Press {V} or {^} repeatedly to select the desired
1 {Menu}
2 Press {V} or {^} repeatedly to select “Caller
Setup”. i {Set}
L “Erase All OK?” will be displayed.
L To cancel erasing, press {Stop}, then press
{Menu}.
3 {Set}
4 Press {Menu} to exit.
7.3.2 Erasing specific caller information
1 {Call Display}
2 Press {V} or {^} repeatedly to select the desired
item. i {#} i {Set} i {Stop}
56
item.
3 {Set}
4 Edit the name if necessary. i {Set} i {V}/{^}
5 Edit the telephone number if necessary. i {Set}
i {Set} i {Stop}
Note:
L To edit a name or number, see page 46.
8. Distinctive Ring
8 Distinctive
Distinctive
Ring
Ring
8.1 Distinctive Ring service
When a call is made to one of your phone numbers, the
telephone company sends a ring pattern to your
telephone line to indicate which number the call is
intended for. By setting up this unit for Distinctive Ring,
you can make the unit automatically start fax reception
when a call comes to the fax number.
To use this service, you must subscribe to the
Distinctive Ring service offered by your local
telephone company. Consult your local telephone
company for availability.
8.2 Using two or more phone
numbers on a single telephone
line
8.2.1 Activating the Distinctive Ring
feature
To use one phone number for the fax, program the ring
pattern assigned for the fax (feature #431 on page 57). In
the example, the ring pattern assigned for fax is a triple
ring, so you should program “C” (triple ring).
Ring pattern
Selection
Standard ring (one long ring)
{1} “A”
1st ring
2nd ring
Double ring (two short rings)
1st ring
2nd ring
Triple ring (short-long-short
rings)
1st ring
{3} “C”
2nd ring
Other triple ring (short-short-long
rings)
1 {Menu} i {#}{4}{3}{0}
2 Press {1} to select “On”.
{2} “B”
{4} “D”
L Press {0} to select “Off”.
3 {Set} i {Menu}
1st ring
Note:
L While the Distinctive Ring feature is activated, you
cannot change the receiving mode.
How phone calls and faxes are received
If the incoming call is for the fax number, the unit will ring
with the assigned ring pattern and automatically start fax
reception.
If the incoming call is for the phone number, the unit will
continue ringing.
L If an external telephone answering machine is
connected, set the ring count of the answering
machine to more than 2.
2nd ring
Note:
L The default setting is {5} “B-D”. The fax will respond
to all calls with ring tone patterns “B”, “C” and “D”.
8.4 Programming the ring pattern
assigned for fax
1 Set feature #430 to “On” (page 57).
2 {Menu} i {#}{4}{3}{1}
3 Press {1} to {5} to select the ring pattern assigned
for fax. i {Set} i {Menu}
8.3 Using three or more phone
numbers on a single telephone
line
You may wish to use three or more phone numbers for a
single telephone line. In order to distinguish which
number the call was addressed to, a different ring
pattern must be assigned for each number.
Example: Using three phone numbers
Telephone
number
Ring pattern
Use
012 1234
Standard ring
Personal
012 5678
Double ring
Business
012 9876
Triple ring
Fax
57
9. Programmable Features
9 Programmable
Features
Summary
Features
9.1 Programming
{Menu}
{Set}
1 {Menu}
2 Press {#} and the 3-digit code (page 59 to page
75).
3 Press the appropriate selection to display the
desired setting.
L This step will vary depending on the feature.
4 {Set}
5 Press {Menu} to exit.
To select features through the web browser interface
(LAN connection only)
You can change features through the web browser
interface instead of the unit.
1. Start Multi-Function Station. i [Utilities] i
[Configuration Web Page]
L You can also access the unit by entering its IP
address on the web browser.
2. Select the desired category from the menu bar.
[Device Configuration]: features of the unit
[Advance Configuration]: advanced features for
each mode
[Network Configuration]: network features
3. Type “root” as the user name, then enter the
password (feature #155 on page 59). i [OK]
4. Select the desired feature tab at the top of the right
frame.
5. Change the settings or edit information.
L This step will vary depending on the feature.
6. [Submit]
L The new data will be transferred to the unit.
7. Close the web browser.
Note:
L The settings displayed in the web browser will be
updated by clicking [Reload].
58
9. Programmable Features
9.2 Basic features
Feature/Code
Selection
Setting the date and time
{#}{1}{0}{1}
Enter the date and time using the dial keypad. See page 22 for details.
Setting your logo
{#}{1}{0}{2}
Enter your logo using the dial keypad. See page 23 for details.
Setting your fax number
{#}{1}{0}{3}
Enter your fax number using the dial keypad. See page 23 for details.
Selecting the language
{#}{1}{1}{0}
The display and reports will be in the selected language.
{1} “English” (default): English is used.
{2} “French”: French is used.
1. {Menu} i {#}{1}{1}{0}
2. Press {1} or {2} to select the desired language. i {Set} i {Menu}
Setting the dialing mode
{#}{1}{2}{0}
{1} “Pulse”
{2} “Tone” (default)
See page 19 for details.
Setting flash time
{#}{1}{2}{1}
The flash time depends on your telephone exchange or host PBX.
{0} “900ms”
{1} “700ms” (default)
{2} “600ms”
{3} “400ms”
{4} “300ms”
{5} “250ms”
{6} “200ms”
{7} “160ms”
{8} “110ms”
{9} “100ms”
{*} “90ms”
{#} “80ms”
Note:
L If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
Changing the password for
feature programming via
remote operation
{#}{1}{5}{5}
1. {Menu} i {#}{1}{5}{5} i {Set}
2. Enter the current password. i {Set}
L The default password is “1234”.
3. Enter a new 4-digit password using 0–9. i {Set}
4. Enter the new password again. i {Set} i {Menu}
Note:
L It is recommended that you change this password from the default
password.
L This password is also used for feature programming via a web browser.
59
9. Programmable Features
Feature/Code
Selection
Setting the toner
maintenance time
{#}{1}{5}{8}
The unit will automatically activate for maintenance, once every 24 hours.
Because this is to prevent the toner from solidifying, the noise that the unit
makes during maintenance cannot be stopped. However, if the unit’s noise
bothers you, you can change the start time.
1. {Menu} i {#}{1}{5}{8} i {Set}
2. Enter the maintenance start time.
L The default time is “12:00AM”.
L Press {*} repeatedly to select “AM” or “PM”.
L If you select French for the language (feature #110 on page 59), the
default time is “00:00”.
3. {Set} i {Menu}
Setting the ringer pattern
{#}{1}{6}{1}
{1} “A” (default)
{2} “B”
{3} “C”
Changing the ring count in
FAX ONLY mode
{#}{2}{1}{0}
{1} “1”
{2} “2”
{3} “3” (default)
{4} “4”
{5} “5 Ext. Tam” (External Telephone Answering Machine)
Setting the caller’s list to print
automatically
{#}{2}{1}{6}
{0} “Off” (default): The unit will not print the caller’s list, but will keep records
of the information for the last 30 callers.
{1} “On”: The unit will print the caller’s list automatically after every 30 new calls
(page 55).
Setting the time adjustment
{#}{2}{2}{6}
Using this feature, the unit’s date and time setting will be automatically adjusted
when caller information is received.
{1} “Auto” (default): The date and time setting will be automatically adjusted.
{2} “Manual”: Deactivates this features.
Setting the recording paper
size in the standard input tray
{#}{3}{8}{0}
{1} “Letter” (default): Letter-size paper
{2} “A4”: A4-size paper
{3} “Legal”: Legal-size paper
Setting the recording paper
size in the optional input tray
{#}{3}{8}{2}
This feature will be displayed only when the optional input tray is installed.
{1} “Letter” (default): Letter-size paper
{2} “A4”: A4-size paper
{3} “Legal”: Legal-size paper
Setting the recording paper
type
{#}{3}{8}{3}
{1} “Plain Paper” (default): 75 g/m2 to 105 g/m2 (20 lb to 28 lb) paper.
{2} “Thin Paper”: 60 g/m2 to 74 g/m2 (16 lb to 19 lb) paper.
{3} “Thick Paper”: 106 g/m2 to 165 g/m2 (29 lb to 44 lb) paper.
Note:
L This setting is valid for both the standard input tray and the optional input
tray.
L “Thick Paper” will be displayed only when “#1” is selected for the
following:
– Paper input tray setting for fax (Feature #440 on page 64).
– Paper input tray setting for copy (Feature #460 on page 67).
– Paper input tray in PCL® (Feature #760 on page 68).
– Paper input tray setting for the scan to e-mail print feature (Feature #565
on page 74).
– Paper input tray setting for direct print (Feature #669 on page 75).
60
9. Programmable Features
Feature/Code
Selection
Setting the waiting time for
the power save mode
{#}{4}{0}{3}
To set the length of time before the unit enters power save mode.
{1} “5min”: 5 minutes
{2} “15min” (default): 15 minutes
{3} “30min”: 30 minutes
{4} “1h”: 1 hour
Note:
L When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
Setting the default operation
mode
{#}{4}{6}{3}
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{1} “Copy” (default): Copy mode is selected as default.
{2} “Fax”: Fax mode is selected as default.
Note:
L You cannot select the scan mode or print mode using this feature.
Setting the default operation
mode timer
{#}{4}{6}{4}
To set the timer before returning to the default operation mode (feature #463).
{0} “Off”: Deactivates this feature.
{1} “30s”: 30 seconds
{2} “1min” (default): 1 minute
{3} “2min”: 2 minutes
{4} “5min”: 5 minutes
Cleaning the drum
{#}{4}{8}{0}
Clean the drum cartridge automatically. See page 108 for details.
Setting toner save feature
{#}{4}{8}{2}
{0} “Off” (default): Deactivates this feature.
{1} “On”: The toner cartridge will last longer.
Note:
L This feature may lower the print quality by reducing toner consumption.
Changing the colour
calibration for all colours
(cyan, magenta, yellow and
black)
{#}{4}{8}{5}
Change the colour calibration if colour printing is too dark or too light. See page
80 for details.
Changing the colour
calibration for cyan
{#}{4}{8}{6}
Change the colour calibration if colour printing is too dark or too light. See page
80 for details.
Changing the colour
calibration for magenta
{#}{4}{8}{7}
Change the colour calibration if colour printing is too dark or too light. See page
80 for details.
Changing the colour
calibration for yellow
{#}{4}{8}{8}
Change the colour calibration if colour printing is too dark or too light. See page
80 for details.
Changing the colour
calibration for black
{#}{4}{8}{9}
Change the colour calibration if colour printing is too dark or too light. See page
80 for details.
61
9. Programmable Features
9.3 Fax features
Feature/Code
Selection
Printing a confirmation report
{#}{4}{0}{1}
{0} “Off”: Confirmation reports will not be printed.
{1} “On”: A confirmation report will be printed after every fax transmission.
{2} “Error” (default): A confirmation report will be printed only when fax
transmission fails.
Setting the journal report to
print automatically
{#}{4}{0}{2}
{0} “Off”: The unit will not print a journal report, but will keep a record of the
last 30 fax transmissions and receptions.
{1} “On” (default): The unit will print a journal report automatically after every
30 new fax transmissions and receptions (page 46).
Sending documents
overseas
{#}{4}{1}{1}
If you cannot send a fax overseas even if the number is correct and the line is
connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
{0} “Off”: Deactivates this feature.
{1} “Next Fax”: This setting is effective only for the next attempted fax
transmission. After transmission, the unit will return to the previous setting.
{2} “Error” (default): When the previous fax transmission fails and you wish to
re-send the document.
Note:
L This feature is not available for broadcast transmission.
L Calling charges may be higher than usual.
62
9. Programmable Features
Feature/Code
Selection
Sending a fax at a specific
time
{#}{4}{1}{2}
This feature allows you to take advantage of low-cost calling hours offered by
your telephone company. This feature can be set up to 24 hours in advance of
the desired time.
{0} “Off” (default)
{1} “On”
To send a document:
1. If the {Fax} light is OFF, turn it ON by pressing {Fax}.
2. Set the original (page 20).
3. {Menu} i {#}{4}{1}{2}
4. Press {1} to select “On”. i {Set}
5. Enter the fax number.
L To enter an item using navigator directory, see steps 2 to 3 on
“6.3.1 Using the scanner glass”, page 47.
6. {Set}
7. Press {V} or {^} repeatedly to select “Time”. i {<}/{>}
8. Enter the transmission start time.
L Press {<} or {>} repeatedly to move the cursor, and then press {V} or
{^} repeatedly to select “AM” or “PM”.
L If you select French for the language (feature #110 on page 59), the time
is set using a 24 hour clock.
9. {Set}
10. If necessary, change the resolution (page 45) and the contrast (page 45).
11. When using the scanner glass, press {Black}. i {Black}
When using the automatic document feeder, press {Black}.
L The document will be fed into the unit and scanned into memory. The
unit will then send the data at the specified time. You cannot use this
feature for another fax transmission until the former sending is
completed.
Note:
L To cancel this setting after programming, press {Stop} while the unit is idle,
and then press {Set}.
Setting the Error Correction
Mode (ECM)
{#}{4}{1}{3}
This feature is available when the sending / receiving fax machines are ECM
compatible.
{0} “Off”: Deactivates this feature.
{1} “On” (default): Fax transmission / reception will be carried out so that the
errors do not occur.
Setting the connecting tone
{#}{4}{1}{6}
If you often have trouble when sending faxes, this feature allows you to hear
connecting tones: fax tone, ring back tone and busy tone. You can use these
tones to confirm the status of the other party’s machine.
{0} “Off”: Deactivates this feature.
{1} “On” (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party’s machine may not be a fax
machine or may have run out of paper. Check with the other party.
L The connecting tone volume cannot be adjusted.
Setting the maximum fax
speed
{#}{4}{1}{8}
{1} “14.4Kbps”
{2} “33.6Kbps” (default)
Note:
L The fax speed maybe lower than the selected speed depending on your
line.
63
9. Programmable Features
Feature/Code
Selection
Activating the Distinctive
Ring feature
{#}{4}{3}{0}
{0} “Off” (default)
{1} “On”
See page 57 for details.
Setting the ring pattern for fax
(Distinctive Ring feature)
{#}{4}{3}{1}
{1} “A”
{2} “B”
{3} “C”
{4} “D”
{5} “B-D” (default)
See page 57 for details.
Setting auto reduction
feature
{#}{4}{3}{2}
To receive a fax document that is longer than your recording paper.
{0} “Off”: The unit will print received documents at their original size.
{1} “On” (default): The unit will scale received documents to fit your recording
paper.
Changing the fax activation
code
{#}{4}{3}{4}
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
L The fax activation code must be different from the code that you
programmed on the answering machine.
{0} “Off” (default)
{1} “On”
1. {Menu} i {#}{4}{3}{4}
2. Press {1} to select “On”. i {Set}
3. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L The default code is “;#9”.
L Do not enter “0000”.
4. {Set} i {Menu}
Setting the memory reception
alert
{#}{4}{3}{7}
To alert you with a beeping sound when a received fax document is stored into
memory due to some existing problem.
{0} “Off”: Deactivates this feature.
{1} “On” (default): You will hear a beeping sound.
Note:
L The slow beeps will continue until you solve the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
Setting friendly reception
{#}{4}{3}{8}
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
{0} “Off”: You have to press {Black} for fax reception.
{1} “On” (default): You do not have to press {Black} for fax reception.
Setting the paper input tray to
use for printing received
faxes
{#}{4}{4}{0}
This feature will be displayed only when the optional input tray is installed.
{1} “#1” (default): Standard input tray
{2} “#2”: Optional input tray
{3} “#1+#2”
Note:
L If you select “#1+#2”, make sure the same paper size is selected for the
following:
– Standard input tray (feature #380 on page 60)
– Optional input tray (feature #382 on page 60)
If either is changed, “#1” will be selected automatically.
64
9. Programmable Features
Feature/Code
Selection
Receiving a fax into the
computer
{#}{4}{4}{2}
If you wish to receive a fax into the computer, activate this feature and run [PC
FAX] from Multi-Function Station.
This feature is available when feature #448 is deactivated.
{0} “Off” (default): Deactivates this feature.
{1} “Always”: If the unit recognizes the connection to the computer, it will
transfer received documents to the computer. If the unit cannot recognize the
connection, it will store received documents in memory, and then transfer the
data after recognition of the connection.
{2} “Connected”: If the unit recognizes the connection to the computer, it will
transfer received documents to the computer. If the unit cannot recognize the
connection, it will print the data.
Setting the computer for PC
fax reception
{#}{4}{4}{3}
To select the computer that will be used for receiving a fax. See page 24 for
details.
Sending legal size
documents using the scanner
glass
{#}{4}{4}{5}
{0} “Off” (default): Deactivates this feature.
{1} “Next Fax”: Legal-size documents can be sent for the next fax
transmission using the scanner glass. After transmission, this setting will turn
OFF automatically.
{2} “Always”: Legal-size documents can be sent using the scanner glass
anytime.
Setting the fax preview mode
{#}{4}{4}{8}
If you wish to display the received fax document, activate this feature.
{0} “Off” (default): Deactivates this feature.
{1} “On”: The unit will store the received fax document in memory. You can
display the fax document before printing or saving (page 51).
Note:
L If you select “On”, the PC fax setting (feature #442 on page 65) will be
deactivated.
Deleting received fax
documents automatically
{#}{4}{4}{9}
This feature is available when feature #448 is activated.
{0} “Off”: Deactivates this feature.
{1} “On” (default): The received fax document will be deleted automatically
after printing (page 51).
Resetting fax features to their
default settings
{#}{4}{5}{9}
{0} “No” (default)
{1} “Yes”
To reset the fax features:
1. {Menu} i {#}{4}{5}{9}
2. Press {1} to select “Yes”. i {Set} i {Set} i {Menu}
Note:
L The PC fax reception (feature #443 on page 24) will not be reset.
L If you select “Yes”, the unit will print the received fax documents that have
been stored into memory.
65
9. Programmable Features
Feature/Code
Selection
Setting the information for
saving a fax document as an
e-mail attachment (via an email server) (LAN connection
only)
L This feature can be
programmed only through
the web browser interface.
When you save the fax document as an e-mail attachment, you need to
program the e-mail server and SMTP server settings beforehand. Consult your
service provider or network administrator for details.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Network Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 59). i [OK]
4. Select the [E-Mail Feature] tab.
5. Click [Edit] next to [E-Mail Server].
6. Enter the e-mail server and SMTP server information. i [Submit]
7. Close the web browser.
Registering the e-mail
destinations (via an e-mail
server) (LAN connection
only)
L This feature can be
programmed only through
the web browser interface.
When you save the fax document as an e-mail attachment, you can register email destinations (up to 300 destinations) for the unit through the web browser
interface in advance.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Network Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 59). i [OK]
4. Select the [E-Mail Feature] tab.
5. Click [Edit] next to [Send User].
6. Click [Edit] next to the desired e-mail user.
7. Enter the name and e-mail address. i [Submit]
8. Close the web browser.
Setting the FTP server
information for saving a fax
document (LAN connection
only)
L This feature can be
programmed only through
the web browser interface.
When you save the fax document in the folder on the FTP server, you can
register FTP destinations (up to 6 destinations) to the unit through the web
browser interface.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Network Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 59). i [OK]
4. Select the [FTP Feature] tab.
5. Click [Edit] next to [FTP Server].
6. Click [Edit] next to the desired FTP server.
7. Enter the server name, IP address, folder directory, etc. i [Submit]
8. Close the web browser.
Note:
L If you do not enter a folder directory in step 7, the fax document will be
saved in the root folder.
66
9. Programmable Features
9.4 Copy features
Feature/Code
Selection
Setting the paper input tray to
use for copy
{#}{4}{6}{0}
This feature will be displayed only when the optional input tray is installed.
{1} “#1” (default): Standard input tray
{2} “#2”: Optional input tray
{3} “#1+#2”
Note:
L If you select “#1+#2”, make sure the same paper size is selected for the
following:
– Standard input tray (feature #380 on page 60)
– Optional input tray (feature #382 on page 60)
If either is changed, “#1” will be selected automatically.
Changing the default copy
resolution
{#}{4}{6}{1}
To change the default resolution setting for copying.
{1} “Text/Photo” (default): For documents containing both text and
photographs.
{2} “Text”: For documents containing only text.
{3} “Photo”: For documents containing photographs, shaded drawings, etc.
Holding the previous contrast
setting
{#}{4}{6}{2}
{0} “Disabled” (default): Deactivates this feature.
{1} “Enabled”: The unit will hold the previous setting.
Note:
L The previous setting will be held individually for copying and sending faxes.
Holding the previous page
layout setting
{#}{4}{6}{7}
{0} “Disabled” (default): Deactivates this feature.
{1} “Enabled”: The unit will hold the previous setting.
Holding the previous zoom
setting
{#}{4}{6}{8}
{0} “Disabled” (default): Deactivates this feature.
{1} “Enabled”: The unit will hold the previous setting.
Holding the previous collate
setting
{#}{4}{6}{9}
{0} “Disabled” (default): Deactivates this feature.
{1} “Enabled”: The unit will hold the previous setting.
Holding the previous duplex
setting
{#}{4}{7}{0}
This feature will be displayed only when the automatic duplex unit is installed.
{0} “Disabled” (default): Deactivates this feature.
{1} “Enabled”: The unit will hold the previous setting.
Setting the paper input tray
select for copy
{#}{4}{7}{1}
This feature will be displayed only when the optional input tray is installed.
{0} “Off”: Deactivates this feature.
{1} “On” (default): When making a copy, you will be prompted to select the
desired recording paper size.
Note:
L When prompted, select the desired recording paper size by pressing {<} or
{>} repeatedly, then press {Black}/{Colour}.
L Even if “On” is selected, this feature will not be activated if the recording
paper type setting (feature #383 on page 60) is set to “Thick Paper”.
Change the setting to “Plain Paper” or “Thin Paper” beforehand.
L If you select “On”, make sure the recording paper size setting matches the
installed recording paper.
– Standard input tray (feature #380 on page 60)
– Optional input tray (feature #382 on page 60)
67
9. Programmable Features
9.5 PC print features
Feature/Code
Selection
Setting the paper input tray in
PCL
{#}{7}{6}{0}
This feature will be displayed only when the optional input tray is installed.
{1} “#1” (default): Standard input tray
{2} “#2”: Optional input tray
{3} “#1+#2”
Note:
L If you select “#1+#2”, make sure the same paper size is selected for the
following:
– Standard input tray (feature #380 on page 60)
– Optional input tray (feature #382 on page 60)
If either is changed, “#1” will be selected automatically.
Setting the number of copies
in PCL
{#}{7}{6}{2}
1. {Menu} i {#}{7}{6}{2} i {Set}
2. Enter the number of copies from “001” to “999”, using the dial keypad.
L The default setting is “001”.
3. {Set} i {Menu}
Setting the recording paper
size in PCL
{#}{7}{6}{3}
{1} “Letter” (default): Letter-size paper
{2} “A4”: A4-size paper
{3} “Legal”: Legal-size paper
Setting the image reduction
feature in PCL
{#}{7}{6}{4}
{0} “Off”: Deactivates this feature.
{1} “On” (default): The document resolution will be automatically reduced
when the data size is too large to print.
Note:
L This feature may lower the print quality by reducing the resolution.
Setting the recording paper
direction in PCL
{#}{7}{6}{5}
{1} “Portrait” (default): The document will be printed in portrait direction.
{2} “Landscape”: The document will be printed in landscape direction.
Setting the A4 wide feature in
PCL
{#}{7}{6}{6}
You can change the margin and printable area of A4-size recording paper so
that 80 characters in 10 cpi font may be printed on a line.
{0} “Off” (default): Deactivates this feature.
{1} “On”: The margin and printable area of A4 recording paper will be changed.
Setting the line per page in
PCL
{#}{7}{6}{7}
To set the number of lines per page in PCL printing.
1. {Menu} i {#}{7}{6}{7} i {Set}
2. Enter the number of lines per page from “005” to “128”, using the dial
keypad.
L The default setting is “060”.
3. {Set} i {Menu}
Setting the font source in PCL
{#}{7}{6}{8}
68
This feature is available when the downloaded font is registered to the unit.
{1} “Resident” (default): The document will be printed using resident font.
{2} “Download Font”: The document will be printed using download font.
9. Programmable Features
Feature/Code
Selection
Setting the font number in
PCL
{#}{7}{6}{9}
To set the font number to be used in PCL printing. The unit assigns a number
to each font.
1. {Menu} i {#}{7}{6}{9} i {Set}
2. Enter the font number from “000” to “054”, using the dial keypad.
L The default setting is “000”.
3. {Set} i {Menu}
Note:
L If feature #768 is set to “Download Font”, the default setting is “001”.
L To print the font list, see page 108.
Setting the font pitch/point in
PCL
{#}{7}{7}{0}
To set the font pitch/point to be used in PCL printing.
1. {Menu} i {#}{7}{7}{0} i {Set}
2. Enter the font pitch from “00.44” to “99.99”, or the point from “004.00”
to “999.75”, using the dial keypad.
L The default pitch is “10.00” and the default point is “012.00”.
3. {Set} i {Menu}
Setting the symbol set in PCL
{#}{7}{7}{1}
To set the symbol set to be used in PCL printing.
1. {Menu} i {#}{7}{7}{1}
2. Press {V} or {^} repeatedly to display the desired symbol set. i {Set}
i {Menu}
Setting the line breaks in PCL
{#}{7}{7}{2}
To set each behaviour when receiving CR, LF, and FF codes.
{1} “CR/LF/FF” (default): CR=CR, LF=LF, FF=FF
{2} “CR+LF/LF/FF”: CR=CR+LF, LF=LF, FF=FF
{3} “CR/CR+LF/CR+FF”: CR=CR, LF=CR+LF, FF=CR+FF
Setting the waiting time for
auto continue mode
{#}{7}{7}{3}
To set the length of time before the unit recovers if a memory overflow occurs.
{1} “Off” (default): Deactivates this feature.
{2} “20s”: 20 seconds
{3} “30s”: 30 seconds
{4} “60s”: 60 seconds
{5} “90s”: 90 seconds
{6} “120s”: 120 seconds
Changing the data timeout
setting
{#}{7}{7}{4}
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1. {Menu} i {#}{7}{7}{4} i {Set}
2. Enter the desired data timeout setting from “005” seconds to “600”
seconds, using the dial keypad.
L The default setting is “060” seconds.
3. {Set} i {Menu}
Detecting monochrome
pages
{#}{7}{7}{5}
{0} “Off”: When you make a colour printout, all pages including monochrome
pages will be printed using colour toner cartridges and the colour drum
cartridge. This will increase consumable usage for colour toner cartridges and
the colour drum cartridge.
{1} “On” (default): When you make a colour printout, this feature automatically
detects the monochrome pages of your document and prints only using the
black toner cartridge and monochrome drum cartridge. This will decrease
consumable usage for colour toner cartridge and colour drum cartridge, but will
require time to automatically switch between monochrome printing and colour
printing.
Note:
L Depending on the type of document, this feature may not be activated even
when “On” is selected.
69
9. Programmable Features
Feature/Code
Selection
Setting mutual A4/letter print
{#}{7}{7}{6}
This feature allows printing in A4-size even if letter-size recording paper is
installed, and vice versa.
{0} “Off”: Deactivates this feature.
{1} “On” (default): Printing is possible between A4/letter-size.
70
9. Programmable Features
9.6 Scan features
Feature/Code
Selection
Setting the scan mode for
scanning to your computer
{#}{4}{9}{3}
{1} “Viewer” (default): The scanned image will be displayed in the [Quick
Image Navigator]*1/[Multi-Function Viewer]*2 window.
{2} “File”: The scanned image will be saved as a file.
{3} “E-Mail”: The scanned image will be saved for e-mail attachment.
{4} “OCR”: The scanned image will be displayed in the OCR window.
*1 For Windows 2000/Windows XP/Windows Vista users
*2 For Windows 98/Windows Me users
Holding the previous
scanning parameter for Push
Scan
{#}{4}{9}{4}
{0} “Disabled” (default): Deactivates this feature.
{1} “Enabled”: The unit will hold the previous scan settings for each mode of
push scan; scan size, resolution, file format, brightness, colour
contrast/contrast.
Setting the monochrome
scan type for Push Scan
{#}{4}{9}{5}
{1} “Black/White” (default): To scan as black lines, select this for text
contents.
{2} “Greyscale”: To scan as black lines and grey shades, select this for
images.
Setting the information for
scan to e-mail (via an e-mail
server) (LAN connection
only)
L This feature can be
programmed only through
the web browser interface.
When you send scanned files via an e-mail server, you need to program the email server and SMTP server settings beforehand. Consult your service
provider or network administrator for details.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Advance Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 59). i [OK]
4. Select the [Scan Feature] tab.
5. Click [Edit] next to [E-Mail Server].
6. Enter the e-mail server and SMTP server information. i [Submit]
7. Close the web browser.
Registering the scan to e-mail
destinations (via an e-mail
server) (LAN connection
only)
L This feature can be
programmed only through
the web browser interface.
When you send scanned files via an e-mail server, you can register e-mail
destinations (up to 300 destinations) for the unit through the web browser
interface in advance.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Advance Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 59). i [OK]
4. Select the [Scan Feature] tab.
5. Click [Edit] next to [Send User].
6. Click [Edit] next to the desired e-mail user.
7. Enter the name and e-mail address. i [Submit]
8. Close the web browser.
71
9. Programmable Features
Feature/Code
Selection
Setting the information for
scan to FTP (LAN connection
only)
L This feature can be
programmed only through
the web browser interface.
When you send scanned files to an FTP server, you can register FTP
destinations (up to 6 destinations) to the unit through the web browser interface.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Advance Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 59). i [OK]
4. Select the [Scan Feature] tab.
5. Click [Edit] next to [FTP Server].
6. Click [Edit] next to the desired FTP server.
7. Enter the server name, IP address, folder directory, etc. i [Submit]
8. Close the web browser.
Note:
L If you do not enter a folder directory in step 7, the scanned image will be
saved in the root folder.
72
9. Programmable Features
9.7 LAN features
Feature/Code
Selection
LAN setting with a DHCP
server
{#}{5}{0}{0}
{0} “Disabled”: Deactivates this feature.
{1} “Enabled” (default): The following will be allocated automatically using a
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
Setting the IP address for the
LAN connection
{#}{5}{0}{1}
This feature is available when feature #500 is deactivated.
Setting the Subnet mask for
the LAN connection
{#}{5}{0}{2}
This feature is available when feature #500 is deactivated.
1. {Menu} i {#}{5}{0}{1} i {Set}
2. Enter the IP address of the unit on the LAN using the dial keypad. i {Set}
i {Menu}
1. {Menu} i {#}{5}{0}{2} i {Set}
2. Enter the subnet mask of the network on the LAN using the dial keypad. i
{Set} i {Menu}
Setting the default gateway
for the LAN connection
{#}{5}{0}{3}
This feature is available when feature #500 is deactivated.
Setting the primary DNS
server for the LAN
connection
{#}{5}{0}{4}
This feature is available when feature #500 is deactivated.
Setting the secondary DNS
server for the LAN
connection
{#}{5}{0}{5}
This feature is available when feature #500 is deactivated.
Setting the machine name
{#}{5}{0}{7}
1. {Menu} i {#}{5}{0}{7} i {Set}
1. {Menu} i {#}{5}{0}{3} i {Set}
2. Enter the default gateway of the network on the LAN using the dial keypad.
i {Set} i {Menu}
1. {Menu} i {#}{5}{0}{4} i {Set}
2. Enter the primary DNS server of the network on the LAN using the dial
keypad. i {Set} i {Menu}
1. {Menu} i {#}{5}{0}{5} i {Set}
2. Enter the secondary DNS server of the network on the LAN using the dial
keypad. i {Set} i {Menu}
2. Enter the name of the unit to recognize on the LAN, up to 15 characters,
using the English alphabet and numbers (see page 78 for character entry).
i {Set} i {Menu}
Note:
L In order to recognize the unit on the LAN, the default name of the unit is
assigned automatically. If you change the name, assign a unique name to
avoid overlapping.
Displaying the MAC address
of the unit
{#}{5}{0}{8}
1. {Menu} i {#}{5}{0}{8} i {Set}
2. The MAC address of the unit will be displayed. i {Menu}
73
9. Programmable Features
Feature/Code
Selection
IP filtering for the LAN
connection
{#}{5}{3}{2}
{0} “Disabled” (default): Deactivates this feature.
{1} “Enabled”: The unit will deny/approve access from the pre-programmed
IP patterns. Whether to deny or approve, and up to 4 patterns can be
programmed through the web browser interface.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Network Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 59). i [OK]
4. Select the [LAN Feature] tab.
5. Click [Edit] next to [IP Filtering].
6. Click [Edit] next to [Filter].
7. Change the mode and edit IP filtering information. i [Submit]
8. Close the web browser.
Setting the IP address
automatically for the LAN
connection
{#}{5}{3}{3}
This feature will be displayed only when feature #500 is activated.
{0} “Disabled” (default): Deactivates this feature.
{1} “Enabled”: IP address will be allocated automatically without using a
DHCP (Dynamic Host Configuration Protocol) server.
Setting HTTPD for the LAN
connection
{#}{5}{3}{4}
{0} “Disabled”: Denies access to the web browser.
{1} “Enabled” (default): Allows access to the web browser.
IPv6 protocol
{#}{5}{3}{5}
{0} “Disabled” (default): Deactivates this feature.
{1} “Enabled”: IPv6 protocol can be used. After installing the printer driver, be
sure to change the port to IPv6 protocol. You can check the IPv6 protocol
address by printing the “Setup List” (page 108).
Note:
L To activate this feature, you need to turn the power switch of the unit OFF,
then ON.
Setting the paper input tray to
use for the scan to e-mail
print feature
{#}{5}{6}{5}
74
This feature will be displayed only when the optional input tray is installed.
{1} “#1” (default): Standard input tray
{2} “#2”: Optional input tray
{3} “#1+#2”
Note:
L If you select “#1+#2”, make sure the same paper size is selected for the
following:
– Standard input tray (feature #380 on page 60)
– Optional input tray (feature #382 on page 60)
If either is changed, “#1” will be selected automatically.
9. Programmable Features
9.8 Direct print feature
Feature/Code
Selection
Paper input tray setting for
direct print
{#}{6}{6}{9}
This feature will be displayed only when the optional input tray is installed.
{1} “#1” (default): Standard input tray
{2} “#2”: Optional input tray
{3} “#1+#2”
Note:
L If you select “#1+#2”, make sure the same paper size is selected for the
following:
– Standard input tray (feature #380 on page 60)
– Optional input tray (feature #382 on page 60)
If either is changed, “#1” will be selected automatically.
Setting the display sort
{#}{6}{7}{2}
{0} “Off”: Deactivates this feature.
{1} “Name Order”: The files will be sorted alphabetically by name.
{2} “Date Order” (default): The files will be sorted by date.
Note:
L Using the “Name Order” or “Date Order” setting will increase display
time.
Setting the display mode for
direct printing from an SD
card
{#}{6}{7}{3}
Setting the information for
direct printing from an FTP
server (LAN connection only)
L This feature can be
programmed only through
the web browser interface.
{1} “File List” (default): The file name for each file will be displayed.
{2} “Thumbnail”: A thumbnail image of each file will be displayed.
Note:
L Using the “Thumbnail” setting will increase display time.
When you print files on an FTP server, you can register FTP server (up to 6
servers) to the unit through the web browser interface.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Network Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 59). i [OK]
4. Select the [FTP Feature] tab.
5. Click [Edit] next to [FTP Server].
6. Click [Edit] next to the desired FTP server.
7. Enter the server name, IP address, etc. i [Submit]
8. Close the web browser.
75
9. Programmable Features
9.9 Network features (LAN connection only)
These features can be programmed only through the web browser interface.
Feature
Tab
Selection
Setting the LAN
features
[LAN Feature]
Enter the LAN feature settings. See page 73 for details.
Setting the community
name for SNMP
[SNMP]
Enter the SNMP community name. Consult your
service provider or network administrator for details.
Setting the location
where you use this unit
[SNMP]
Enter the location information of the unit.
Displaying the link local
address
[IPv6]
The link local address will be displayed.
Displaying the IP
address for auto
configuration
[IPv6]
The IP address for auto configuration will be displayed.
Setting the IP address
for IPv6
[IPv6]
Enter the IP address for IPv6. Consult your service
provider or network administrator for details.
Setting the default
router for IPv6
[IPv6]
Enter the default router address for IPv6. Consult your
service provider or network administrator for details.
Setting the FTP server
information
[FTP Feature]
Enter the FTP server information to carry out the
following functions:
– Printing a file stored on an FTP server (page 33).
– Sending scanned images to a folder on an FTP
server (page 37).
– Saving the fax document in a folder on an FTP
server (page 51).
Setting the e-mail server
information
[E-Mail Feature]
Enter the e-mail server and SMTP server information to
carry out the following functions:
– Sending scanned images from the unit via an e-mail
(page 36).
– Saving the fax document as an e-mail attachment
(page 51).
Registering the e-mail
destinations (via an email server)
[E-Mail Feature]
Register e-mail destinations (up to 300 destinations) for
the unit. See page 66, 71 for details.
Setting the error notify
feature
[Error Notify]
[Enabled]: The unit will send an e-mail to registered
destinations when a problem occurs.
[Disabled] (default): Deactivates this feature.
Setting the information
for the error notify
feature
[Error Notify]
Enter the e-mail server and SMTP server information to
send error notification e-mails to.
76
9. Programmable Features
Feature
Tab
Selection
Registering
destinations for the
error notify feature
[Error Notify]
Enter the e-mail address to which error notifications will
be sent and select the types of problems.
[Life Warning]: A warning indicating that the toner
cartridge, drum cartridge or waste toner cartridge
needs to be replaced soon.
[Media Path Error]: An error indicating that there is a
problem with the paper input tray.
[Life Error]: An error indicating that the toner cartridge,
drum cartridge or waste toner cartridge needs to be
replaced.
Setting the scan to email print feature
[Scan to E-Mail Print]
[Enabled]: The unit will automatically print e-mail
attachments that it receives.
[Disabled] (default): Deactivates this feature.
See page 34 for details.
Setting the e-mail
checking interval for the
scan to e-mail print
feature
[Scan to E-Mail Print]
Enter the desired e-mail checking interval.
Setting the header print
option for the scan to email print feature
[Scan to E-Mail Print]
[Enabled] (default): The unit will print the header
information along with the received e-mail attachments.
[Disabled]: Deactivates this feature.
Setting the information
for the scan to e-mail
print feature
[Scan to E-Mail Print]
When you use the scan to e-mail print feature, you need
to program the POP server settings beforehand. See
page 34 for details.
Displaying the scan to
e-mail print information
[Scan to E-Mail Print]
The information for the 30 most recently received emails will be displayed.
77
10. Useful Information
10 Useful
Useful
Information
Information
10.1 Character entry
10.2 Status of the unit
The dial keypad is used to enter characters and
numbers.
– Press {<} or {>} to move the cursor.
– Press dial keys to enter characters and numbers.
– Press {Back} to erase the character or number
highlighted by the cursor. Press and hold {Back} to
erase all characters or numbers.
– To enter another character located on the same dial
key, press {>} to move the cursor to the next space,
then press the appropriate dial key.
Keypad
Characters
{1}
1
.
_
–
[
]
{
}
/
=
,
`
:
;
?
|
{2}
A B C a
b
c
2
{3}
D E F d
e
f
3
{4}
G H I
g
h
i
4
{5}
J
j
k
l
5
{6}
M N O m n
o
6
{7}
P Q R S p
q
r
{8}
T U V t
u
v
8
{9}
W X Y Z w
x
{0}
0
@ (
)
$
% & ¥
K L
+
You can easily operate the following functions from your
computer.
– Programming the features (page 59)
– Storing, editing or erasing items in directories (page
46)
– Storing or erasing items for broadcast transmission
(page 48)
– Viewing items in the journal report (page 46)
– Saving the journal report to your computer
– Viewing items in the caller’s list (page 55)
– Storing caller information into directories (page 56)
– Saving the caller’s list on your computer
1 Start Multi-Function Station. i [Remote Control]
L The [Multi-Function Remote Control] window
will appear.
s
7
y
z
9
<
> !
"
#
@
^
→
’
10.2.1 Using Remote Control
{#}
To switch between uppercase
and lowercase letters.
{Flash}
Hyphen
{Call Display}
To insert a space.
{Back}
To delete a character.
2 Select the desired tab.
L The latest data in the unit will be displayed.
3 Perform the desired operation.
L For details about each function, click [Help].
L To stop the operation, click [Cancel].
To select characters using {V} or {^}
Instead of pressing the dial keys, you can select
characters using {V} or {^}.
4 [OK]
1. Press {V} repeatedly to display the desired
character. Characters will be displayed in the
following order:
1 Uppercase letters
2 Numbers
3 Symbols
4 Lowercase letters
L If you press {^}, the order will be reversed.
5 Enter the password (feature #155 on page 59). i
2. Press {>} to insert the displayed character.
3. Return to step 1 to enter the next character.
78
L You can also click [Apply] to continue the next
operation without closing the window.
[OK]
L The new data will be transferred to the unit and
the window will close.
Note:
L Some of the features cannot be programmed from
your computer.
L For details, see the help file by selecting [p] from
Multi-Function Station.
L When another person is adjusting stored data in the
unit, it may be overwritten. Make sure the unit is not
currently being used for the same function.
10. Useful Information
10.2.2 Using Device Monitor
You can confirm the setting information and current
status of the unit from your computer.
1 Start Multi-Function Station.
2 [Utilities] i [Device Monitor]
L The [Device Monitor] window will appear.
3 Confirm the status of the unit.
[Status]: Current status of the unit
Note:
L Additional information (toner and recording paper
status, unit information, etc.) will be displayed in
[Status] tab by clicking [Advanced Information].
L You can update the status of the unit by clicking
[Refresh].
L If a printing error occurs, the Device Monitor will start
automatically and display the error information.
L For details, see the help file by selecting [p] from
Multi-Function Station.
10.3 Cancelling the operations
You can cancel the current operation from the unit. You
can also select the desired operation to cancel.
1 {Stop}
L The current operation will be cancelled.
L If the operation is not cancelled, go to step 2.
2 When a cancel confirmation message is
displayed:
Press {Set} to cancel the operation.
When some operations are displayed:
Press {V} or {^} repeatedly to select the operation
that you want to cancel. i {Set}
10.2.3 Using the web browser (LAN
connection only)
You can confirm the setting information and status of the
unit from the web browser.
1 Start Multi-Function Station. i [Utilities] i
[Configuration Web Page]
L You can also access the unit by entering its IP
address in a web browser.
2 Select a category from the menu bar.
[Status]: Toner and paper information, etc.
[Device]: Current status of the unit, etc.
[Advance]: Feature settings information, etc.
[Network]: Network information, etc.
L When you select [Device], [Advance] or
[Network], you can change which features are
displayed by clicking the feature tabs at the top of
the right frame.
3 Confirm the status of the unit.
Note:
L You can update the status of the unit by clicking
[Reload].
79
10. Useful Information
10.4 Changing the colour
calibration
If colour printing is too dark or too light, change the
colour calibration.
1 Select the desired colour to change the calibration.
L To change the colour density for cyan, magenta,
yellow and black, press {Menu}. i
{#}{4}{8}{5}
L To change the colour calibration for cyan, press
{Menu}. i {#}{4}{8}{6}
L To change the colour calibration for magenta,
press {Menu}. i {#}{4}{8}{7}
L To change the colour calibration for yellow, press
{Menu}. i {#}{4}{8}{8}
L To change the colour calibration for black, press
{Menu}. i {#}{4}{8}{9}
2 Select the desired colour calibration.
{0} “-5”
{1} “-4”
{2} “-3”
{3} “-2”
{4} “-1”
{5} “0” (default)
{6} “1”
{7} “2”
{8} “3”
{9} “4”
{*} “5”
3 {Set}
4 Press {Menu} to exit.
Printing a colour test
You can print the colour test to check the colour density
for each colour (page 108).
10.5 SD card
You can print files stored on an SD card and save files to
an SD card.
This unit supports the following commercially available
memory cards. These are referred to as SD cards in the
operating instructions.
– SD Memory Card (up to 2 GB)*1
– SDHC™ Memory Card (up to 32 GB)*1
– miniSD™ Card (up to 2 GB) (adaptor required)*2
– miniSDHC™ Card (up to 16 GB) (adaptor required)*2
– microSD™ Card (up to 2 GB) (adaptor required)*2
– microSDHC™ Card (up to 16 GB) (adaptor
required)*2
*1 Equipped with a write-protect switch that can prevent
data from being written to the card.
*2 First insert the card into the adaptor, and then insert
the adaptor into the SD card slot. The card adaptor is
equipped with a write-protect switch that can prevent
data from being written to the card.
L To ensure that the unit operates properly, we
recommend the use of Panasonic SD cards.
Important:
L Do not remove the SD card or turn the power
switch off while reading or writing data to avoid
damage to the data.
L Be sure to make a backup copy of the data.
L We are not responsible for any damages incurred
to your SD card resulting from corrupted, or lost
data.
L When the write-protect switch is in the lock
position, it is not possible to write data to the
card. Be sure that the switch is unlocked (1) to
ensure correct operation.
1
Note:
L Confirm the SD card icon and the SD card access
icon on the display (page 9). If the SD access icon is
green, the SD card is working correctly.
L An SD card is not supplied. Please purchase a
supported SD card.
L The access speed may be slightly different
depending on the kind of SD card.
L For details on the SD card, see the operating
instructions of the SD card.
80
10. Useful Information
10.5.1 Inserting an SD card
Insert the SD card (1) with the labelled surface facing
upward into the SD card slot (2).
1
Note:
L Do not delete or change the folder name on your
computer.
L If you use the SD card with 2 or more units at the
same time, a different folder is made on the SD card
for each unit. To view data that was saved using a
different unit, you need to select the folder that was
created by the different unit.
2
10.5.2 Removing an SD card
1 Push the SD card in (1).
1
2 Pull the SD card (2) straight out.
2
File folder in an SD card
When you save files into the SD card, the following folder
is made on the SD card.
SD:/PRIVATE/MEIGROUP/PCC/MFP/IMAGE/XXXXXX
(“XXXXXX” will vary depending on the unit.)
81
10. Useful Information
Option
10.6 Optional automatic duplex
unit
You can add an optional automatic duplex unit. See page
7 for accessory information.
A4, letter or legal-size recording paper (plain and thin)
can be used.
Important:
L Before starting installation of the optional
automatic duplex unit, be sure to turn the power
switch OFF. For more details about the
installation, please refer to the installation guide
for the optional automatic duplex unit.
L To use the optional automatic duplex unit with
your computer, you need to change the printer
properties. See page 83 for details.
–
To use thin paper, change the recording paper
type setting (feature #383 on page 60).
Important:
L Before starting installation of the optional input
tray, be sure to turn the power switch OFF. For
more details about the installation, please refer
to the installation guide for the optional input
tray.
L After installation, you can select the optional
input tray to be used for the following:
– Paper input tray setting for faxing (feature
#440 on page 64).
– Paper input tray setting for copying (feature
#460 on page 67).
– Paper input tray in PCL (feature #760 on page
68).
– Paper input tray setting for the scan to e-mail
print feature (feature #565 on page 74).
– Paper input tray setting for direct print
(Feature #669 on page 75).
L To use the optional input tray with your
computer, you need to change the printer
properties. See page 83 for details.
Caution for the optional input tray
L Do not drop the optional input tray.
10.7 Optional input tray
You can add an optional input tray. See page 7 for
accessory information.
L Hold the optional input tray with both hands
when removing or installing. The optional input
tray weighs approximately 4.8 kg (10.6 lb) when
the recording paper is fully installed.
A4, letter or legal-size recording paper (plain and thin)
can be used.
The optional input tray can hold:
– Up to 520 sheets of 75 g/m2 (20 lb) paper.
– Up to 470 sheets of 80 g/m2 (21 lb) paper.
– Up to 410 sheets of 90 g/m2 (24 lb) paper.
– Up to 360 sheets of 105 g/m2 (28 lb) paper.
L The unit is set for printing letter-size plain paper
by default.
– To use A4 or legal-size paper, change the
recording paper size setting (feature #382 on
page 60).
82
10. Useful Information
Do not touch the plate (1) on the left side of the
optional input tray.
10.8 Setting the optional input
tray/optional automatic duplex
unit
To use the optional input tray/optional automatic duplex
unit with your computer, proceed as follows.
L This setting is necessary for both the colour and
monochrome printer drivers.
1
1 [Start]
2 Open the printer window.
For Windows 98/Windows Me/Windows 2000:
[Settings] i [Printers]
For Windows XP Professional:
[Printers and Faxes]
Approx. 4.8 kg (10.6 lb)
L Do not position the unit in a location where it is
unstable or subject to vibrations. The unit weighs
approximately 40 kg (88 lb) when the optional input
tray is installed and the recording paper is fully
installed.
For Windows XP Home:
[Control Panel] i [Printers and Other
Hardware] i [Printers and Faxes]
For Windows Vista:
[Control Panel] i [Printers]
3 Select the unit’s name.
4 For Windows 98/Windows Me/Windows
2000/Windows XP:
Select [Properties] from the [File] menu.
L The printer properties window will appear.
For Windows Vista:
Select [Properties] from the [Organize] menu.
L The printer properties window will appear.
5 Click [Auto Configuration] on the [Device] tab.
i [OK]
L The optional input tray and/or optional automatic
duplex unit will be automatically detected.
– For [Number of Input Tray], [2] will be
selected.
– For [Automatic Duplex Unit], [Installed]
will be selected.
If the setting is not changed automatically,
change it manually.
6 [OK]
83
11. Help
11 Help
Error
Messages
11.1 Error messages – Reports
If a problem occurs during fax transmission or reception, one of the following messages will be printed on the
confirmation and journal reports (page 45).
Message
Communication Error
Code
40-42
46-72
FF
Cause & Solution
L A transmission or reception error occurred. Try
again or check with the other party.
43
44
L A line problem occurred. Connect the telephone line
cord to a different jack and try again.
L An overseas transmission error occurred. Try using
the overseas mode (feature #411 on page 62).
Document Jammed
-----
L Remove the jammed document (page 104).
Error-Not Your Unit
53
54
59
70
L A transmission or reception error occurred because
of a problem with the other party’s fax machine.
Check with the other party.
Junk Fax Proh. Reject
-----
L The junk fax prohibitor feature of this unit rejected
fax reception.
Memory Full
-----
L The memory is full of received documents due to a
lack of recording paper or a recording paper jam.
Install paper (page 15) or remove the jammed paper
(page 99).
L If feature #442 is set to “Always” (page 65), check
the connection between the computer and the unit.
L If feature #448 is set to “On” (page 65), the memory
is full of received documents. View, print or save the
documents, and then erase unnecessary
documents (page 52).
No Document / Failed Pickup
-----
L The document was not fed into the unit properly. Reinsert it and try again.
Other Fax not responding
-----
L The other party’s fax machine is busy or has run out
of recording paper. Try again.
L The other party’s fax machine rings too many times.
Send the fax manually (page 45).
L The other party’s machine is not a fax machine.
Check with the other party.
L The number you dialed is not in service.
Pressed the ‘Stop’ key
-----
L {Stop} was pressed and fax communication was
cancelled.
The cover was opened
-----
L The front or left cover was opened. Close it and try
again.
OK
-----
L Fax transmission or reception was successful.
84
11. Help
11.2 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display
Cause & Solution
“Access Error”
L The access to an SD card did not work correctly due to some existing
problem. Press {Stop} to clear the message, or remove the SD card, and
then try again.
“Call Service”
L There is something wrong with the unit. Contact our service personnel.
“Change Supplies Toner
Empty”
“Change Supplies Black
:Empty”
L The toner cartridge life is finished (page 9). Replace the toner cartridge
immediately.
“Change Supplies Toner
Low”
“Change Supplies Black
:Low”
Note:
L “Black”: Black toner
L “Cyan”: Cyan toner
L “Magenta”: Magenta toner
L “Yellow”: Yellow toner
L The toner cartridge life is near its end (page 9). Replace the toner cartridge
as soon as possible.
Note:
L “Black”: Black toner
L “Cyan”: Cyan toner
L “Magenta”: Magenta toner
L “Yellow”: Yellow toner
“Change Supplies
Replace Waste Toner”
“Change Supplies
Replace Waste Toner
Cartridge”
L The waste toner cartridge life is finished. Replace the waste toner cartridge
immediately (page 10, 111).
“Change Supplies Waste
Toner Full”
L The waste toner cartridge life is near its end. Replace the waste toner
cartridge as soon as possible.
“Check Document”
L The document was not fed into the unit properly. Remove the document,
and then press {Stop} to clear the message. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers (page 106)
and try again.
“Check Install Input
Tray #1”
L The paper input tray is not installed correctly. Pull out the paper input tray
and re-insert it.
Note:
L “#1”: Standard input tray
L “#2”: Optional input tray
L “#1+#2”: Standard input tray and optional input tray
“Check Paper”
L You are printing on envelopes. Check the standard input tray to be sure that
envelopes are installed, and then press {Black}/{Colour}.
L The recording paper size is not the same as the size selected for copy.
Change the recording paper size setting (feature #380 on page 60 or
feature #382 on page 60), and install the appropriate recording paper.
L The recording paper size is not the same as the size selected when printing
from the PC. Change the recording paper size setting (feature #380 on page
60 or feature #382 on page 60), and install the appropriate recording paper.
L The recording paper size is not the same as the size selected for receiving
a fax. Change the recording paper size setting (feature #380 on page 60 or
feature #382 on page 60), and install the appropriate recording paper.
85
11. Help
Display
“Check Pick Up Input
Tray #1”
Cause & Solution
L Recording paper was not fed into the unit properly. Re-insert the recording
paper (page 103).
Note:
L “#1”: Standard input tray
L “#2”: Optional input tray
“Colour Drum Life Low”
“Monochrome Drum Life
Low”
L The drum cartridge life is near its end. Replace the drum cartridge as soon
as possible.
“Colour Drum Replace”
“Monochrome Drum
Replace”
L The drum cartridge life is finished. Replace the drum cartridge immediately.
Note:
L The continuous use of an old drum cartridge may cause malfunction. To
prevent this, when the drum life is finished, the unit will stop printing after a
while, and printing will not be possible until a new drum cartridge is
installed.
“Cool Down Fuser”
L The unit is cooling down the fuser unit. Wait for a while.
“Directory Full”
L There is no space to store new items in navigator directory. Erase
unnecessary items (page 46).
“Drum Not Installed”
L The colour drum cartridge or the monochrome drum cartridge is not
installed. Install it (page 11).
“E-Mail Size Over”
L When performing scan to e-mail server, the total file size of scanned data
exceeded the file size limitation. Divide the document into sections.
“Fax in Memory”
L The unit has a document in memory. See the other displayed message
instructions to print out the document. For fax memory capacity, see page
109.
L If feature #442 (page 65) is set to “Always”,
– check the connection between the computer and the unit.
– check the computer is turned ON.
L If feature #448 (page 65) is set to “On”,
– view, print or save the received fax documents (page 51), and then
erase the unnecessary documents (page 52).
– turn the setting to “Off”. The fax documents stored in memory will be
printed automatically.
– set feature #449 (page 65) to “On”, and then print the received fax
documents (page 51).
“File Size Over”
L When performing scan to FTP server, the total file size of scanned data
exceeded the file size limitation. Divide the document into sections.
L When printing a file on an FTP server, the total print file size exceeded the
file size limitation. Divide the document into sections.
“Front or Left Cover
Open”
L The front or left cover is open. Close it.
“Keep Copying”
L Copying has stopped due to some existing problem (example: a lack of
recording paper or a recording paper jam). See the other displayed
message instructions to continue copying.
“Keep Printing”
L Direct printing has stopped due to some existing problem (example: a lack
of recording paper or a recording paper jam). See the other displayed
message instructions to continue printing.
“Low Temperature”
L The inside of the unit is extremely cold and cannot be operated. Use the unit
in a warmer area.
86
11. Help
Display
Cause & Solution
“Memory Full”
L When performing memory transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.
L When making a copy, the document being stored exceeded the memory
capacity of the unit. Press {Stop} to clear the message. Divide the
document into sections.
“Memory Overflow”
L When printing a file, the document being stored exceeded the memory
capacity of the unit. Press {Stop} to clear the message. Change the printer
settings (page 29).
“Modem Error”
L There is something wrong with the unit’s modem. Contact our service
personnel.
“No Fax Reply”
L The other party’s fax machine is busy or has run out of recording paper. Try
again.
“No Printable Data”
L There is no printable data on the SD card or FTP server. Store the data in
a supported format.
“Not Support Format”
L The files on the SD card are in an unsupported format. Use one of the
supported formats (page 31).
L The SD card is not formatted correctly. After backing up your data, use your
computer to format the SD card, selecting FAT for the file system.
Formatting the card will erase all data stored on the SD card.
“Not Support Media”
L The inserted SD card could not be read. Use a supported SD card (page
80).
“Out of Paper Input Tray
#1”
L Recording paper is not installed or the paper input tray has run out of paper.
Install paper (page 15, 30).
L Recording paper was not fed into the unit properly. Reinstall the paper
(page 15, 30).
Note:
L “#1”: Standard input tray
L “#2”: Optional input tray
L “#1+#2”: Standard input tray and optional input tray
“Paper Jammed”
L A recording paper jam occurred. See the other displayed message
instructions to remove the jammed paper (page 99).
“PC Fail or Busy.”
L The cable or the computer power cord is not connected correctly. Check the
connections (page 18, 26).
L The software is not running on the computer. Restart the software and try
again.
“Please Wait”
L The unit is warming up. Wait for a while.
“Redial Time Out”
L The other party’s fax machine is busy or has run out of recording paper. Try
again.
“Remove Document”
L The document is jammed. Remove the jammed document (page 104).
L Attempted to send or copy a document longer than 600 mm (235/8") using
the automatic document feeder. Press {Stop} to remove the document.
Divide the document into two or more sheets and try again.
87
11. Help
Display
Cause & Solution
“RX Memory Full”
L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper (page 15) or remove the jammed
paper (page 99).
L If feature #442 (page 65) is set to “Always”,
– check the connection between the computer and the unit.
– check the computer is turned ON.
L If feature #448 (page 65) is set to “On”,
– view, print or save the received fax documents (page 51), and then
erase the unnecessary documents (page 52).
– turn the setting to “Off”. The fax documents stored in memory will be
printed automatically.
– set feature #449 (page 65) to “On”, and then print the received fax
documents (page 51).
“Same name already
exists.”
L The same file name already exists in the SD card folder. See the other
displayed message instructions to continue saving the data.
“Scanner Position Error”
L There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
“SD Card is pulled out.”
L The SD card has been removed from the unit. Reinsert it (page 81).
“SD Card not installed.”
L There is no SD card inserted in the unit. Insert one (page 81).
“SD Card Write
Protection”
L The write-protect switch of the SD card is in the lock position. Unlock the
switch to allow write access (page 80).
“SD Size Over”
L There is no space to save new data on the SD card. Erase unnecessary
data.
“Self Calibration”
L The unit is changing the colour calibration. Wait for a while.
“Transmit Error”
L A transmission error occurred. Try again.
“Toner Cartridge Not
Installed”
L The toner cartridge is not installed. Install it (page 11).
“Tray #2 Left Cover
Open”
L The left cover of the optional input tray is open. Close it.
“Waste Toner Not
Installed”
“Waste Toner Cartridge
Not Installed”
L The waste toner cartridge is not installed. Install it (page 10).
88
11. Help
Troubleshooting
11.3 When a function does not work
11.3.1 General
Problem
Cause & Solution
The unit does not work.
L Check the connections (page 18, 26).
The recording paper exit
becomes full quickly or the
recording paper does not
stack properly at the
recording paper exit.
L High humidity may cause the recording paper to curl. Try turning the paper
over and re-inserting it. If the curl on the paper is heavy, please remove it
from the recording paper exit. If you still have this problem, contact our
service personnel.
I cannot adjust the volume or
display items stored in
navigator directory.
L The unit is set to scan mode, copy mode or print mode. Press {Fax} to
switch modes. If you still have this problem, contact our service personnel.
A printing error is displayed
while using PC FAX and
Remote Control.
L The printer driver is used for PC FAX and Remote Control. Transmission
errors will be displayed as printing errors.
Multi-Function Station does
not work properly.
L If the USB cable is connected to a USB hub, connect the cable directly to the
USB port on your computer.
L Make sure you have installed the latest Service Pack available for the
version of Windows installed on your computer. See the Microsoft web site
for details.
L If you have any other multifunction software installed on your computer,
uninstall it.
L Check that your computer has enough memory and hard disk space. If your
computer warns that there is insufficient memory, close other applications.
If there is not enough space on the hard disk, delete unnecessary files.
L Uninstall Multi-Function Station once, and re-install it.
I cannot install or uninstall
Multi-Function Station.
L Some of the files needed to install or uninstall Multi-Function Station may be
corrupted. Use the MfsCleaner utility (found on the supplied CD-ROM) to
solve the problem.
1. Insert the supplied CD-ROM into your CD-ROM drive.
L The setup program will start automatically.
2. [Tools] i [Cleanup Tool]
L The [MfsCleaner] window will appear.
3. Click [Clean], and then click [Yes] to restart the computer.
Note:
L To install Multi-Function Station again, see page 25.
I cannot view the operating
instructions using MultiFunction Station.
L Install the operating instructions on your computer beforehand (page 26).
I cannot find the unit in the
[Target Device] or [Device
Select] dialogue box when
operating the following
functions.
– Scanning
– Remote Control
– PC FAX
– Device Monitor
L The printer driver has not been installed. Install it on your computer (page
25).
89
11. Help
Problem
Cause & Solution
I forgot the password for
feature programming via
remote operation.
L You may have changed the feature programming password. If you do not
remember it, assign a new password using feature #155 (page 59). When
required to enter the current password, enter “0101” instead.
11.3.2 Printing problems
Problem
Cause & Solution
I cannot print in
monochrome.
OR
I cannot print in colour.
L When using the unit as a printer, change the colour mode from the
[Quality] tab (page 29).
L When printing on envelopes, even if you press {Black}/{Colour}, the
printing colour will follow the colour mode setting.
L When using the unit as a printer;
– select the monochrome printer driver to print in monochrome.
– select the colour printer driver to print in colour.
L When performing direct printing;
– press {Black} to print in monochrome.
– press {Colour} to print in colour.
L When using the unit as a copier;
– press {Black} to copy in monochrome.
– press {Colour} to copy in colour.
L When using the unit as a fax, sending/receiving colour faxes is not possible.
L One or more colour toner cartridge(s) is empty. Replace the toner cartridge
according to the displayed message. Even if cyan, magenta, yellow is
empty, you can still print in monochrome.
I cannot print a file on an FTP
server.
L The FTP server settings are not registered. Program the FTP server
settings beforehand (page 75).
L The file is too large or is in an unsupported format. Use a supported file
format (page 33).
Colour printing is too dark or
too light.
L Change the colour calibration (page 80).
Vertical, white lines appear
on the printed documents.
L The drum cartridge may be the cause. Print the colour test, then the printer
test pages to clean the drum cartridge (feature #480 on page 108).
The printing quality is poor
(e.g. has smudges, blurred
points or lines).
L Some paper has instructions recommending which side to print on. Try
turning the recording paper over.
L You may have used paper with a cotton and/or fibre content that is over
20 %, such as letterhead or resume paper.
L The recording paper is too damp. Use new paper.
ABC
I changed the recording
paper, but the printing quality
is still poor.
L The glass or rollers are dirty with correction fluid, etc. Clean them (page
105, 106). Please do not insert a document before correction fluid has dried
completely.
L The paper chute is dirty with toner, etc. Clean it (page 107).
L The toner save mode of feature #482 is ON (page 61).
L The unit may not be the cause. Print the printer test list to find out the
problem (page 108).
A blank sheet is ejected.
L You placed the document facing the wrong way when using the copier.
L The other party placed the document in their fax machine the wrong way.
Check with the other party.
90
11. Help
Problem
I cannot find the PCL driver.
Cause & Solution
L The PCL driver can be found in the following folder on the supplied CDROM.
Operating system
Folder path
Windows 98/Windows Me
“D:\Drivers\Object\Printer\Win98\PCL”
Windows 2000/Windows XP
Home/Windows Vista x32
“D:\Drivers\Object\Printer\x32\PCL”
Windows XP Professional x64
Edition/Windows Vista x64
“D:\Drivers\Object\Printer\x64\PCL”
(where “D” is the drive letter of your CD-ROM drive)
For more details, refer to:
http://panasonic.co.jp/pcc/cs/en/telecom/mfp-faq.htm
I specified automatic duplex
printing using the printer
driver, but documents are
printed on one side.
L Install the optional automatic duplex unit (page 82).
11.3.3 Scanner
Problem
Cause & Solution
I cannot scan.
L When scanning at a high resolution, a large amount of available memory is
required. If your computer warns that there is insufficient memory, close
other applications and try again.
L The unit is in use. Try again later.
L There is not enough space on the hard disk. Delete unnecessary files and
try again.
L Check the connection between the computer and the unit (page 18, 26).
L Restart the computer, and try again.
L You attempted to scan a document longer than the paper size which you
set. Change the setting or divide the document into the appropriate paper
size, and try again.
I cannot scan in
monochrome.
OR
I cannot scan in colour.
L To scan in monochrome, press {Black}. To scan in colour, press {Colour}.
The document is not fed into
the unit when using the unit
as a scanner.
L Remove the document in the automatic document feeder and re-insert it.
Even after clicking [Cancel],
scanning continues.
L Please wait. It may take a while for the cancel request to be accepted.
91
11. Help
Problem
The name of the desired
computer is not displayed on
the unit when scanning
documents from the unit
(LAN connection only).
Cause & Solution
L The printer driver has not been installed. Install it on your computer (page
25).
L The PC name list up feature has been set to [Off]. Set [PC name list up
on device] to [On] (page 27).
L The maximum number of computers on the LAN is connected to the unit (up
to 30 computers). Set [PC name list up on device] to [Off] on the other
computers (page 27).
L The IP address of the unit may have changed. To detect the IP address,
proceed as follows.
[Start] i [All Programs] or [Programs] i [Panasonic] i the
unit’s name i [IP Address Checker]
L The IP address for the unit will be detected.
11.3.4 Copier
Problem
Cause & Solution
The unit will not make a copy.
L You cannot make a copy during programming. Make the copy after
programming.
L The document was not fed into the unit properly. Re-insert the document.
L Recording paper is not installed or the unit has run out of paper. Install
paper (page 15).
Letters on the copied
documents are not clear.
L The original document is too dark or too light. Change the contrast (page
40) and try again.
The copied documents are
too dark and cannot be read.
L You used a coloured paper as a document. Change the contrast (page 40)
and make a lighter copy of the document, using “Text” resolution (page
40).
11.3.5 Fax
Problem
Cause & Solution
I cannot send documents.
L The telephone line cord is connected to the [EXT] jack on the unit. Connect
to the [LINE] jack (page 18).
L The other party’s fax machine is busy or has run out of recording paper. Try
again.
L The other party’s machine is not a fax machine. Check with the other party.
L The other party’s fax machine failed to answer the fax automatically. Send
the fax manually (page 45).
L Set the maximum fax speed to “14.4Kbps” (feature #418 on page 63).
I cannot send a fax overseas.
L Use the overseas transmission mode (feature #411 on page 62).
L Add two pauses at the end of the telephone number or dial manually.
The other party complains
that letters on their received
document are distorted.
L If your line has special telephone services such as call waiting, the service
may have been activated during fax transmission. Connect the unit to a line
that does not have these services.
L Another telephone on the same line is off the hook. Hang up the extension
telephone and try again.
The other party complains
about the quality of their
received documents.
L Try copying the document. If the copied image is clear, there may be
something wrong with the other party’s machine.
If the copied image is not clear, too dark, or black and white lines or
smudges appear, refer to “11.3.2 Printing problems”, page 90.
L The original document is too dark or too light. Change the contrast (page
45) and try again.
92
11. Help
Problem
Cause & Solution
The other party complains
that received documents are
too dark and cannot be read.
L You used a coloured paper as a document. Change the contrast (page 40)
and make a lighter copy of the document, using “Text” resolution (page
40), and try again.
I cannot receive documents.
L You may have subscribed to a voice mail service due to service packs
offered by your telephone company. Fax reception may not be possible
when voice mail is activated so we recommend you to:
– contact your telephone company and request to deactivate voice mail
service, or
– subscribe to a Distinctive Ring service (page 57).
L The telephone line cord is connected to the [EXT] jack on the unit. Connect
to the [LINE] jack (page 18).
L Feature #442 is activated and the received fax documents are automatically
transferred to the computer. View the received documents using the
computer (page 54).
L Feature #448 is activated and the received fax documents are automatically
stored in memory. View the received documents on the display (page 51).
L Set the maximum fax speed to “14.4Kbps” (feature #418 on page 63).
I cannot receive documents
automatically.
L The receiving mode is set to TEL mode. Set to FAX ONLY mode. Press
{Fax Auto Answer} repeatedly to turn ON the {Fax Auto Answer} light.
L The time taken to answer the call is too long. Decrease the number of rings
before the unit answers a call (feature #210 on page 60).
L Make sure that the Distinctive Ring of feature #430 is set properly (page 57).
If you do not subscribe to the Distinctive Ring service offered by your local
telephone company, this feature should be OFF.
The display shows
“Connecting”, but faxes are
not received.
L The incoming call is not a fax. Set to TEL mode. Press {Fax Auto Answer}
repeatedly to turn OFF the {Fax Auto Answer} light.
The printing quality of the
received documents is poor.
L If documents can be copied properly, the unit is working normally. The other
party may have sent a faint document or there may be something wrong
with the other party’s machine. Ask them to send a clearer copy of the
document or to check their fax machine.
L If documents can not be copied properly, refer to “11.3.2 Printing problems”,
page 90.
The other party complains
that they cannot send a
document.
L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper (page 15) or remove the jammed
paper (page 99).
L If feature #442 is set to “Always” (page 65), check the connection between
the computer and the unit.
L If feature #448 is set to “On” (page 65), the memory is full of received
documents. View, print or save the documents, and then erase
unnecessary documents (page 52).
L The unit is not in FAX ONLY mode. Press {Fax Auto Answer} repeatedly to
turn ON the {Fax Auto Answer} light.
I cannot select the desired
receiving mode.
L If you want to set FAX ONLY mode:
– press {Fax Auto Answer} repeatedly to turn ON the {Fax Auto
Answer} light.
L If you want to set TEL mode:
– press {Fax Auto Answer} repeatedly to turn OFF the {Fax Auto
Answer} light.
L The Distinctive Ring of feature #430 is activated (page 57).
93
11. Help
Problem
Cause & Solution
When an extension telephone
is connected, I cannot receive
documents by pressing
{*}{#}{9}.
L You must set remote fax activation to ON (feature #434 on page 64)
beforehand.
L Press {*}{#}{9} firmly.
L You may have changed the remote fax activation code from {*}{#}{9}
(default setting). Verify the remote fax activation code (feature #434 on page
64).
I cannot hear a dial tone.
L The telephone line cord is connected to the [EXT] jack on the unit. Connect
to the [LINE] jack (page 18).
L If you use a splitter/coupler to connect the unit, remove the splitter/coupler
and connect the unit to the wall jack directly. If the unit operates properly,
check the splitter/coupler.
L Disconnect the unit from the telephone line and connect a known working
telephone. If the working telephone operates properly, contact our service
personnel to have the unit repaired. If the working telephone does not
operate properly, contact your telephone company.
L The power cord or telephone line cord is not connected. Check the
connections (page 18).
L If you connected the unit through a computer modem, connect the unit
directly to a telephone line jack.
I cannot make calls.
L The dialing mode setting may be wrong. Change the setting (feature #120
on page 19).
The unit does not ring.
L The ringer volume is turned OFF. Adjust it (page 22).
The other party complains
they only hear a fax tone and
cannot talk.
L FAX ONLY mode is set (page 50). Tell the other party the number is only
used for faxes.
L If you use a Distinctive Ring service, make sure you have set the same ring
pattern assigned by the telephone company (page 57).
The {Redial} or {Pause}
button does not function
properly.
L If this button is pressed during dialing, a pause will be inserted. If pressed
immediately after a dial tone is obtained, the last number dialed will be
redialed.
The receiving mode does not
function properly.
L Distinctive Ring is set (feature #430 on page 57).
Whenever I try to retrieve my
voice mail messages, I am
interrupted by the fax tone.
L You are probably entering {*}{#}{9}. This is the default setting for the fax
activation code. If you use a voice mail service, turn the fax activation
feature OFF or reprogram the activation code (feature #434 on page 64).
I cannot receive a fax
document on the computer.
L Make sure the following features are set beforehand.
– PC fax reception (feature #442 on page 65)
– Computer setting for the PC fax reception (feature #443 on page 24)
I cannot display a received
fax document.
L You must set the fax preview mode to ON (feature #448 on page 65)
beforehand.
L You cannot display a received fax document during printing, copying or
scanning. Try again after printing, copying or scanning.
I cannot erase a received fax
document.
L View or print a received fax document before erasing (page 51).
Received fax documents do
not print automatically.
L Feature #448 is activated and the received fax documents are saved into
the memory of the unit. View the received documents on the display (page
51).
94
11. Help
11.3.6 Using an SD card
Problem
Cause & Solution
No image are displayed.
L There is no SD card inserted in the unit. Insert a supported SD card (page
81).
L The inserted SD card is not compatible with the unit. Use a supported SD
card (page 80).
L There are no files stored on the SD card. Save files on the SD card in a
supported file format beforehand.
L The file is too large or is in an unsupported format. Use a supported file
format (page 31).
It takes considerable time to
display an image.
L It may take some time until the image is displayed, depending on the image
format and size of the image. This is normal.
I cannot save the data to an
SD card.
L There is no SD card inserted in the unit. Insert a supported SD card (page
81).
L The write-protect switch of the SD card is in the lock position. Unlock the
switch to allow write access (page 80) and try again.
L There is not enough space to save new files on the SD card. Delete
unnecessary files, and try again.
I cannot print a file saved on
the SD card.
L There is no SD card inserted in the unit. Insert a supported SD card (page
81).
L You tried to print different file formats onto 1 page. Activate the continuous
print setting (page 32).
L The file may be broken. Try viewing the file on your computer.
L The file is too large or is in an unsupported format. Use a supported file
format (page 31).
95
11. Help
11.3.7 Network
Problem
I cannot operate the following
functions.
– PC printing
– Scanning
– Remote Control
– PC FAX
– Device Monitor
Cause & Solution
L Confirm the LED via the LAN port of the main board. If the LED is glowing
or blinking, network access is working correctly.
If the LED is not glowing or blinking, confirm the LAN cable (category 5
straight cable) is connected to the LAN port of the main board correctly.
L If the LED is blinking and you cannot perform the desired operation, the IP
address of the unit may have changed.
To detect the IP address, proceed as follows.
[Start] i [All Programs] or [Programs] i [Panasonic] i the
unit’s name i [IP Address Checker]
L The IP address for the unit will be detected.
Note:
L If the IP address cannot be detected, enter it manually (feature #501 on
page 73). The IP address of the computer and the unit must be in the
same local IP address class as shown below. Set the IP address in the
range of the number specified in the class corresponding to your local
network scale.
Class
Subnet mask
IP address
Class A
255.0.0.0
10.0.0.1 10.255.255.254
Class B
255.255.0.0
172.xx.0.1 172.xx.255.254*1
Class C
255.255.255.0
192.168.xx.1 192.168.xx.254*2
*1 “xx” should be the same value for the unit and for the computer, as
shown in the following example.
Example: 172.16.0.1 - 172.16.255.254
(The available range of “xx” is 16 - 31)
*2 “xx” should be the same value for the unit and for the computer, as
shown in the following example.
Example: 192.168.0.1 - 192.168.0.254
(The available range of “xx” is 0 - 255)
L Your firewall software is blocking the connection. Disable the firewall
software or change the firewall settings to make the Multi-Function Station
work properly.
L LAN features can be used when the unit and the computer are connected in
same network segment only. Make sure the network is configured correctly.
Consult your network administrator.
The unit does not appear in
the [Select a Network Device]
dialogue box when installing
Multi-Function Station.
96
L Your firewall software is blocking the connection and the setup program may
not list any units. Consult your network administrator and temporarily
disable the firewall software.
L The unit is connected to another network segment and the setup program
may not list any units. Make sure the network is configured correctly.
Consult your network administrator.
11. Help
Problem
The [Windows Security Alert]
dialogue box appears and
asks if I want to block
[PCCMFLPD] and I cannot
operate the following
functions after installing the
Microsoft Windows XP
Service Pack 2.
– PC printing
– Scanning
– Remote Control
– PC FAX
– Device Monitor
Cause & Solution
L Click [Keep Blocking] and run the Windows Firewall Setting Tool to allow
the data transmission for Multi-Function Station (page 97).
11.3.8 Using an answering machine
Problem
Cause & Solution
I cannot receive documents
automatically.
L Your greeting message on the answering machine is too long. Shorten the
message. Record a message less than 10 seconds long.
L The answering machine rings too many times. Set to 1 or 2 rings.
I cannot receive voice
messages.
L Check if the answering machine is turned ON and connected to the unit
properly (page 52).
L Set the number of rings on the answering machine to 1 or 2.
I pressed the remote access
code to access the answering
machine remotely, but the line
was disconnected.
L The code may include “#” which is used for certain features provided by
telephone companies. Change the code on the answering machine to
another number which does not include “#”.
Callers complain that they
cannot send a document.
L There is no room left in the memory of your answering machine to record
voice messages. See the operating instructions of the answering machine
and erase unnecessary messages.
L You set the answering machine to only give a greeting message.
11.3.9 If a power failure occurs
L The unit will not function.
L If any documents are stored in the memory (i.e. during copying, PC printing, fax transmission or fax reception),
they will be lost.
L The unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
L Fax transmission and reception will be interrupted.
L When power is restored, a power down report will be printed out stating which fax items in the memory have been
erased.
11.3.10 Firewall setting tool for Microsoft Windows XP Service Pack 2/Windows Vista
users (LAN connection only)
After installing Microsoft Windows XP Service Pack 2/Windows Vista, you will not be able to use the following
functions because the Windows Firewall feature will be activated and block the connection.
– Device Monitor
– LPD Manager (Network communication tool)
The Windows Firewall Setting Tool enables you to change the Windows Firewall security settings and to use the above
functions properly.
1 Insert the CD-ROM that is supplied with the unit into your CD-ROM drive.
97
11. Help
L If the [Select Language] dialogue box appears, select the desired language that you want to use with this
software. Click [OK].
2 [Tools] i [Windows Firewall Setting]
L The [Windows Firewall Setting Tool] window will appear.
3 [Add to the exceptions list] i [OK] i [OK]
To confirm the security settings (For Windows XP users)
1. [Start] i [Control Panel] i [Security Center]
L The [Windows Security Center] window will appear.
2. [Windows Firewall]
L The [Windows Firewall] dialogue box will appear.
3. Click the [Exceptions] tab.
4. Confirm that [Panasonic Trap Monitor Service] and [PCCMFLPD] are displayed and checked on the
[Programs and Services] list.
To confirm the security settings (For Windows Vista users)
1. [Start] i [Control Panel] i [Security Center]
L The [Windows Security Center] window will appear.
2. [Windows Firewall]
L The [Windows Firewall] dialogue box will appear.
3. [Change settings]
L The [User Account Control] dialogue box will appear.
4. [Continue]
5. Click the [Exceptions] tab.
6. Confirm that [Panasonic Trap Monitor Service], [PCMFSMLM] and [PCCMFLPD] are displayed and checked
on the [Program or port] list.
11.3.11 Notice for KX-MB200/KX-MB700/KX-FLB880 series users
If you have already installed KX-MB200/KX-MB700/KX-FLB880 series Multi-Function Station on your computer, the
instructions for modifying or adding printer driver change after installing the DP-MC210 series Multi-Function Station.
You can modify or add a printer driver, as follows:
1 Start Windows and insert the KX-MB200/KX-MB700/KX-FLB880 series CD-ROM into your CD-ROM drive.
L If the [Select Language] dialogue box appears, select the desired language that you want to use with this
software. Click [OK].
2 [Easy installation]
3 [Modify] i [Next]
4 Select [Modify Utility] or [Add Printer Driver]. i [Next]. Then follow the on-screen instructions.
Important:
L For users of versions prior to 1.12, download the latest software as follows, then activate it.
[Start] i [All Programs] or [Programs] i [Panasonic] i the unit’s name i [Support Web
Page]. Then follow the on-screen instructions.
98
12. Paper Jams
12 Paper Jams
Jams
12.1 Recording paper jam
1 Push the left cover open lever (1) upward, then pull
open the left cover (2).
1
Caution:
L Do not pull out the jammed paper forcibly before
opening the left cover.
2
L Do not open the paper input tray as the jammed
paper may be pulled and the jam may get worse.
3
4
Caution:
L During or immediately after printing,
the fuser unit (3) gets hot. Wait until
the fuser unit cools down before
removing the jammed paper.
Note:
L Do not touch the rollers (4).
12.1.1 When the recording paper has
jammed inside of the unit
The display will show the following:
– “Paper Jammed”
“Open Left Cover”
“Hot Caution”
– “Paper Jammed”
b
“Open Left Cover Hot Caution”
99
12. Paper Jams
2 Remove the jammed paper.
Case 1:
When the recording paper has jammed near the
rollers:
Case 2:
When the recording paper has jammed near the
fuser unit:
1. Lift both green levers (6) until they stop.
1. Remove the jammed paper (5) carefully by pulling it
toward you.
5
6
2. Close the left cover.
2. Remove the jammed paper (7) carefully by pulling it
toward you.
Example 1:
7
Example 2:
7
100
12. Paper Jams
3. Push back the green levers (8) to their original
positions.
Case 3:
When the recording paper has jammed inside of the
optional automatic duplex unit:
1. Close the left cover.
8
4. Close the left cover.
2. Open the automatic duplex unit cover (9).
9
3. When the document has jammed near the roller:
Hold the automatic duplex unit cover and remove the
jammed paper (j) carefully by pulling it upward.
j
101
12. Paper Jams
When the document has jammed near the
recording paper exit of the automatic duplex unit:
Hold the automatic duplex unit cover and remove the
jammed paper (k) carefully by pulling it toward you.
k
12.1.2 When the recording paper has
jammed near the optional input tray
The display will show the following:
– “Paper Jammed”
“Open Tray #2”
“Left Cover”
– “Paper Jammed”
b
“Open Tray #2 Left Cover”
1 Open the cover (1) at the left side of the optional
input tray.
4. Close the automatic duplex unit cover.
1
2 Remove the jammed paper (2).
2
102
12. Paper Jams
3 Close the cover at the left side of the optional input
tray.
12.1.3 When the recording paper is not fed
into the unit properly
The display will show the following:
– “Check Pick Up Input Tray #1” (standard
input tray)
– “Check Pick Up Input Tray #2” (optional input
tray)
1 Pull the paper input tray until it clicks into place, then
pull it completely out, lifting the front part of the tray.
Remove the recording paper and straighten.
2 Re-load the recording paper.
Standard input tray:
Optional input tray:
3 Insert the paper input tray to the unit, lifting the front
part of the tray. Then push it completely into the unit.
Note:
L If the error message is still displayed, check the
recording paper specifications and re-install
recording paper. See page 15 and page 82 for
details.
103
12. Paper Jams
2 Remove the jammed document (3) carefully.
12.2 Document jams (Automatic
document feeder)
When the document has jammed near the
document entrance:
3
Caution:
L Do not pull out the jammed document forcibly
before lifting the ADF cover.
When the document has jammed near the
document exit:
1 Open the ADF cover (1) while holding the
3
document cover (2).
1
2
3 Close the ADF cover.
104
13. Cleaning
3 Close the document cover (5).
13 Cleaning
Cleaning
13.1 Cleaning the white plates
and glass
5
Clean the white plates and glass when a black line, a
white line or a dirty pattern appears on:
– your recording paper,
– the original document,
– the scanned data, or
– the fax document received by the other party.
Caution:
L Do not use paper products, such as paper towels
or tissues for cleaning.
1 Open the document cover (1).
1
2 Hold the document cover (2) while cleaning the
white plates (3) and the scanner glass (4).
2
3
4
105
13. Cleaning
4 Close the ADF cover.
13.2 Cleaning the document
feeder rollers
Clean the rollers when the document frequently
misfeeds.
Caution:
L Do not use paper products, such as paper towels
or tissues for cleaning.
1 Turn the power switch OFF.
2 Open the ADF cover (1) while holding the
document cover (2).
1
2
3 Clean the document feeder rollers (3) with a cloth
moistened with water, and let all parts dry
thoroughly.
3
106
5 Turn the power switch ON.
13. Cleaning
3 Clean the paper chute (5) with a dry paper towel or
13.3 Cleaning the paper chute
tissue.
Clean the paper chute inside the unit when a line or a
dirty pattern appears at the top or bottom of your
recording paper.
1 Turn the power switch OFF.
2 Push the left cover open lever (1) upward, then pull
open the left cover (2).
1
5
6
Note:
L Do not touch the black belt (6), or rub it strongly.
2
4 Close the left cover.
3
4
Caution:
L During or immediately after printing,
the fuser unit (3) gets hot. Wait until
the fuser unit cools down before
cleaning the paper chute.
5 Turn the power switch ON.
Note:
L Do not touch the rollers (4).
107
14. General Information
14 General
Printed
Repor
Information
ts
14.1 Reference lists and reports
L The drum cartridge will be cleaned automatically
by printing out 3 pages of the selected colour.
You can print out the following lists and reports for your
reference.
– “Setup List”
– “Tel No. List”
– “Journal Report”
– “Broadcast List”
– “Printer Test”
– “Colour Test”
– “Caller’s List”
– “PCL Font List”
– “Address List”
– “FTP Server List”
{Menu}
L Repeat steps 1 to 3 for all lines with vertical, white
lines.
L Print the colour test again. If the vertical, white
lines remain, try the next solution.
{V}{^}{<}{>} {Set}
1 {Menu}
2 Press {V} or {^} repeatedly to select “Print
Report”.
3 Press {<} or {>} repeatedly to select the desired
item.
4 Press {Set} to start printing. i {Menu}
Colour test
The unit will print a colour test page consisting of black,
cyan, magenta and yellow lines so you can specify which
drum cartridge has the problem.
If vertical, white lines appear on the colour test page, try
the following to solve the problem:
Solution 1: Cleaning the drum cartridge
Important:
L This solution uses at least 3 pages of recording
paper. Make sure there is enough recording
paper installed in the standard input tray
beforehand.
1. {Menu} i {#}{4}{8}{0}
2. Select the colour which has vertical, white lines in the
colour test page.
{1} “Black” (default)
{2} “Cyan”
{3} “Magenta”
{4} “Yellow”
3. {Set}
108
Solution 2: Changing the drum cartridge
L If the black test page has vertical, white lines, change
the monochrome drum cartridge.
L If the cyan, magenta or yellow test page has vertical,
white lines, change the colour drum cartridge.
L Print the colour test again. If the vertical, white lines
remain, contact our service personnel.
14. General Information
Specifications
14.2 Specifications
■ Applicable lines:
Public Switched Telephone Network
■ Document size:
Max. 216 mm (81/2") in width, Max. 600 mm (235/8") in
length
■ Effective scanning width:
208 mm (83/16")
■ Effective printing width:
Letter/Legal: 208 mm (83/16")
A4: 202 mm (715/16")
■ Transmission time*1:
Approx. 4 s/page (ECM-MMR Memory transmission)*2
■ Scanning density:
Scanning resolution:
Up to 600 × 1,200 dpi (Optical)
Up to 9,600 × 9,600 dpi (Interpolated)
Copy resolution:
Up to 600 × 600 dpi
Fax resolution:
Horizontal: 8 pels/mm (203 pels/inch)
Vertical: 3.85 lines/mm (98 lines/inch)-in standard
resolution,
7.7 lines/mm (196 lines/inch)-in fine/photo
resolution,
15.4 lines/mm (392 lines/inch)-in super fine
resolution
■ Photo resolution:
64-level
■ Scanner type:
Colour Contact Image Sensor
■ Printer type:
Laser Printer
■ Data compression system:
Modified Huffman (MH), Modified READ (MR), Modified
Modified READ (MMR)
■ Modem speed:
33,600 / 31,200 / 28,800 / 26,400 / 24,000 / 21,600 /
19,200 / 16,800 / 14,400 / 12,000 / 9,600 / 7,200 / 4,800
/ 2,400 bps; Automatic Fallback
■ Operating environment:
10 °C – 32.5 °C (50 °F – 90.5 °F), 20 % – 80 % RH
(Relative Humidity)
■ Dimensions:
Approx. width 520 mm × depth 438 mm × height 546 mm
(201/2" × 171/4" × 211/2")
■ Mass (Weight):
Approx. 30 kg (67 lb)
■ Power consumption:
Standby: Approx. 20 W
Preheat: Approx. 40 W
Copy: Approx. 550 W
Maximum: Approx. 1,000 W (When the fuser lamp turns
on)
■ Power supply:
120 V AC, 60 Hz
■ Memory capacity
(for operation and storing memory):
192 MB
■ Fax memory capacity:
10 MB in total
Approx. 630 pages of memory reception
(max. 255 pages per one reception)
Approx. 150 pages of memory transmission
(Based on the ITU-T No. 1 Test Chart in standard
resolution, without using the Error Correction Mode.)
■ Scan to e-mail server memory capacity:
5 MB in total (including the e-mail message)
■ Scan to FTP server memory capacity:
20 MB in total
■ Laser diode properties:
Laser output: Max. 6.5 mW
Wave length: 770 nm – 800 nm
Emission duration: Continuous
■ Print speed:
Colour:
Letter: Approx. 21 ppm (pages per minute)
A4: Approx. 20 ppm (pages per minute)
B/W:
Letter: Approx. 21 ppm (pages per minute)
A4: Approx. 20 ppm (pages per minute)
■ Printing resolution:
Up to 1,200 × 1,200 dpi
*1 Transmission speed depends on the contents of the
pages, resolution, telephone line conditions and
capability of the other party’s machine.
*2 Transmission speed is based on the ITU-T No. 1 Test
Chart with original mode. If the capability of the other
party’s machine is inferior to your unit, the
transmission time may be longer.
ITU-T No.1 Test Chart
Note:
L Design and specifications are subject to change
without notice.
L The pictures and illustrations in these instructions
may vary slightly from the actual product.
L The accuracy of the clock is approximately ±60
seconds a month.
109
14. General Information
Recording paper specifications
Plain paper/Thin paper:
Letter: 216 mm × 279 mm (81/2" × 11")
Legal: 216 mm × 356 mm (81/2" × 14")
A4: 210 mm × 297 mm (81/4" × 1111/16")
Thick paper/Transparency/Label/Card stock size:
Letter: 216 mm × 279 mm (81/2" × 11")
A4: 210 mm × 297 mm (81/4" × 1111/16")
Envelope size:
#10: 105 mm × 241 mm (41/8" × 91/2")
DL: 110 mm × 220 mm (45/16" × 85/8")
Recording paper weight:
60 g/m2 to 165 g/m2 (16 lb to 44 lb)
Card stock weight:
163 g/m2 (90 lb)
Note for recording paper:
L We recommend that you test paper (especially
special sizes and types of paper) on the unit before
purchasing large quantities.
L Do not use the following types of paper:
– Paper with cotton and/or fibre content that is over
20 %, such as letterhead paper or paper used for
resumes
– Extremely smooth or shiny paper, or paper that is
highly textured
– Coated, damaged or wrinkled paper
– Paper with foreign objects attached, such as tabs
or staples
– Paper that has dust, lint or oil stains
– Paper that will melt, vaporize, discolour, scorch or
emit dangerous fumes near 200 °C (392 °F),
such as vellum paper. These materials may
transfer onto the fusing roller and cause damage.
– Moist paper
– Inkjet paper
L Some paper is designed to be printed on only one
side. Try printing on the other side of the paper if you
are not happy with the print quality, or if misfeeding
occurs.
L For proper paper feeding and best print quality, we
recommend using long-grained paper.
L Do not use paper of different types or thicknesses at
the same time. This may cause paper jams.
L Do not use paper printed from this unit for doublesided printing with other copiers or printers. This may
cause paper jams.
L To avoid curling, do not open paper packs until you
are ready to use the paper. Store unused paper in
the original packaging, in a cool and dry location.
Toner life
Toner life depends on the amount of content in a printed
document. The following is the approximate relationship
between coverage and toner life for replacement toner
cartridge. Toner life varies in actual usage.
L The following number of sheets and image sample is
for printing in one colour. As actual colour printing is
a combination of several colours, the number of
sheets will vary depending on the contents of the
original document.
5 % coverage
Approx. 2,000 sheets of
letter-size paper using:
– KX-FATC501A
– KX-FATM502A
– KX-FATY503A
Approx. 2,500 sheets using:
– KX-FATK504A
Approx. 4,000 sheets using:
– KX-FATC506A
– KX-FATM507A
– KX-FATY508A
– KX-FATK509A
10 % coverage
Approx. 1,000 sheets of
letter-size paper using:
– KX-FATC501A
– KX-FATM502A
– KX-FATY503A
Approx. 1,250 sheets using:
– KX-FATK504A
Approx. 2,000 sheets using:
– KX-FATC506A
– KX-FATM507A
– KX-FATY508A
– KX-FATK509A
15 % coverage
Approx. 650 sheets of lettersize paper using:
– KX-FATC501A
– KX-FATM502A
– KX-FATY503A
Approx. 800 sheets using:
– KX-FATK504A
Approx. 1,400 sheets using:
– KX-FATC506A
– KX-FATM507A
– KX-FATY508A
– KX-FATK509A
Table of Contents1.
1. Table of Contents 1. Introduction and Installation Accessories
1.1 Included accessories.1.2 Accessory information.Finding the Controls
1.3 Description of buttons.1.4 Overview Installation
1.5 Toner cartridge and drum unit
1.6 Document tray 1.7 Output tray1.8 Recording paper2. Preparation
2.1 Connections 2.2 Turning the power switch ON Help Button2.3 Help function Volume
2.4 Adjusting volume Initial Programming 2.5 Dialing mode 2.6 Date and time.
2.7 Your logo.2.8 Your fax number 3. Copy / Copying3.1 Using the unit as a copy machine.
3.2 Making a copy 3.3 More copying features
4. PC Operations/ Setup 4.1 Connecting to a computer
4.2 Installing Multi-Function Station 4.3 Starting Multi-Function Station Printing
4.4 Using the unit as a printer Scanning 4.5 Using the unit as a scannerRemote Control
4.6 Operating the unit from your computer.
4.7 Fax sending/receiving using Multi-Function Station
4.8 Registering the computer in the LANnetwork with the optional LAN board
4.9 Confirming the status of the unit 5. Case / Setup
5.1 Selecting the way to use your unit 5.2 Case 1: FAX ONLY
5.3 Case 2a: Distinctive Ring (1 phone line with 2 or more phone numbers)
5.4 Case 2b: Distinctive Ring (using withvoice mail service)
5.5 Case 3: EXT. TAM (External Telephone Answering Machine)
Table of Contents2.
1. Table of Contents
1.1 Included accessories.1.2 Accessory information.Finding the Controls
1.3 Description of buttons.1.4 Overview Installation1.5 Toner cartridge and drum unit
1.6 Document tray 1.7 Output tray1.8 Recording paper2. Preparation
2.1 Connections 2.2 Turning the power switch ON Help Button2.3 Help function Volume
2.4 Adjusting volume Initial Programming 2.5 Dialing mode 2.6 Date and time.
2.7 Your logo.2.8 Your fax number 3. Copy / Copying
3.1 Using the unit as a copy machine.
Thank you for purchasing a Panasonic fax machine.
Things you should keep a record of
Attach your sales receipt here.
For your future reference
Date of purchase
Serial number (found on the rear of the unit)
Dealer's name and address
Dealer's telephone number
Table of Contents1.
1. Table of Contents / Introduction and Installation Accessories
1.1 Included accessories.
1.2 Accessory information.Finding the Controls
1.3 Description of buttons.
1.4 Overview Installation
1.5 Toner cartridge and drum unit
1.6 Document tray
1.7 Output tray
1.8 Recording paper
2. Preparation
2.1 Connections
2.2 Turning the power switch ON Help Button
2.3 Help function Volume
2.4 Adjusting volume Initial Programming
2.5 Dialing mode
2.6 Date and time.
2.7 Your logo.
2.8 Your fax number
3. Copy / Copying
3.1 Using the unit as a copy machine.
3.2 Making a copy
3.3 More copying features
4. PC Operations/ Setup 4.1 Connecting to a computer
4.2 Installing Multi-Function Station 4.3 Starting Multi-Function Station Printing
4.4 Using the unit as a printer Scanning 4.5 Using the unit as a scannerRemote Control
4.6 Operating the unit from your computer.
4.7 Fax sending/receiving using Multi-Function Station
Thank you for purchasing a Panasonic fax machine.
Things you should keep a record of
Attach your sales receipt here.
For your future reference
Date of purchase
Serial number (found on the rear of the unit)
Dealer's name and address
Dealer's telephone number
Table of Contents1.
1. Table of Contents / Introduction and Installation Accessories
1.1 Included accessories.
1.2 Accessory information.Finding the Controls
1.3 Description of buttons.
1.4 Overview Installation
1.5 Toner cartridge and drum unit
1.6 Document tray
1.7 Output tray
1.8 Recording paper
2. Preparation
2.1 Connections
2.2 Turning the power switch ON Help Button
2.3 Help function Volume
2.4 Adjusting volume Initial Programming
2.5 Dialing mode
2.6 Date and time.
Thank you for purchasing a Panasonic fax machine.
Things you should keep a record of
Attach your sales receipt here.
For your future reference
Date of purchase
Serial number (found on the rear of the unit)
Dealer's name and address
Dealer's telephone number
Note:
L The coverage changes with the depth, thickness and
size of the characters.
110
14. General Information
L If you turn on the toner save feature, the toner
cartridge will last approx. 40 % longer.
Drum life
The drum cartridge needs to be replaced regularly.
There are various factors that determine the actual drum
life, such as temperature, humidity, type of paper and
how much toner you use for the number of sheets per
print job. The maximum drum life is approx. 10,000
sheets. The actual number of sheets your drum will print
may be significantly less than this estimate if your unit is
often used for printing small number sheets per job.
Because many of the factors that determine the actual
drum life cannot be controlled, we cannot guarantee a
minimum number of sheets that will be printed by your
drum.
Note:
L The continuous use of an old drum cartridge may
cause malfunction. To prevent this, when the drum
life is finished, the unit will stop printing after a while,
and printing will not be possible until a new drum
cartridge is installed.
Waste toner cartridge life
The waste toner cartridge needs to be replaced
regularly. The maximum waste toner cartridge life is
approx. 32,000 sheets with 5 % coverage for
monochrome printing and approx. 8,000 sheets with 5 %
cyan, magenta, yellow and black coverage for colour
printing. The actual number of sheets may significantly
vary depending on the contents of the original
document.
Waste disposal method
Waste material should be disposed of under conditions
which meet all national and local environmental
regulations.
111
14. General Information
Copyrights
14.3 Information of copyrights and licences
L This product uses a part of NetBSD kernel.
The use of a part of NetBSD kernel is based on the typical BSD style licence below.
Copyright (c)
The Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and
the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions
and the following disclaimer in the documentation and/or other materials provided with the
distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgement:
This product includes software developed by the University of California, Berkeley and its
contributors.
4. Neither the name of the University nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
However, parts of the NetBSD Kernel are provided with the following copyright notices.
Copyright (c) 1980, 1983, 1988, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1980, 1986, 1989, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1980, 1986, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1980, 1986, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1982, 1985, 1986, 1988, 1993, 1994 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1988, 1990, 1993 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1988, 1990, 1993, 1994, 1995 The Regents of the University of California. All
rights reserved.
Copyright (c) 1982, 1986, 1988, 1990, 1993, 1995 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1988, 1991, 1993 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1988, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1982, 1986, 1988, 1993, 1995 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1989, 1993 The Regents of the University of California. All rights reserved.
112
14. General Information
Copyright (c) 1982, 1986, 1990, 1991, 1993 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1990, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1982, 1986, 1990, 1993, 1994 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1982, 1986, 1991, 1993, 1994 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1991, 1993, 1995 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1982, 1986, 1993, 1994 The Regents of the University of California. All rights reserved.
Copyright (c) 1982, 1986, 1993, 1994, 1995 The Regents of the University of California. All rights
reserved.
Copyright (c) 1982, 1986, 1993, 1995 The Regents of the University of California. All rights reserved.
Copyright (c) 1982, 1988, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1983, 1990, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1983, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1985, 1986, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1985, 1986, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1986, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1987, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1987, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1987, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1988 Regents of the University of California. All rights reserved
Copyright (c) 1988 Stephen Deering.
Copyright (c) 1988 University of Utah.
Copyright (c) 1988, 1989, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1988, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1988, 1992, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1988, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1989 The Regents of the University of California. All rights reserved.
Copyright (c) 1989, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1989, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1989, 1993, 1994 The Regents of the University of California. All rights reserved.
Copyright (c) 1990, 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1990, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1991, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1991, 1993, 1994 The Regents of the University of California. All rights reserved.
Copyright (c) 1992 Regents of the University of California. All rights reserved.
Copyright (c) 1992, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1993 Adam Glass
Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
Copyright (c) 1994 Gordon W. Ross
Copyright (c) 1994 Winning Strategies, Inc. All rights reserved.
Copyright (c) 1995 The Regents of the University of California. All rights reserved.
Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. All rights reserved.
Copyright (c) 1996 The Regents of the University of California. All rights reserved.
Copyright (c) 1996 John S. Dyson All rights reserved.
Copyright (c) 1996 Matt Thomas. All rights reserved.
Copyright (c) 1996 Matthew R. Green. All rights reserved.
Copyright (c) 1996 Paul Kranenburg
Copyright (c) 1996, 1997, 1999, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1996, 2000 Christopher G. Demetriou. All rights reserved.
113
14. General Information
Copyright (c) 1996,1999 by Internet Software Consortium.
Copyright (c) 1996-1999 by Internet Software Consortium.
Copyright (c) 1997 Jonathan Stone and Jason R. Thorpe. All rights reserved.
Copyright (c) 1997 Christos Zoulas. All rights reserved.
Copyright (c) 1997 Manuel Bouyer. All rights reserved.
Copyright (c) 1997, 1998 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1997, 1998, 1999, 2000 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1997, 1998, 1999, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1997, 1998, 1999, 2002 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1997, 1998, 2000, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1997, 1998, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1997,98 The NetBSD Foundation, Inc. All rights reserved.
Copyright (C) 1997-2000 Sony Computer Science Laboratories Inc. All rights reserved.
Copyright (c) 1997-2002 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com> All rights reserved.
Copyright (c) 1998, 1999 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1998, 2000 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1998, 2000, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1999 The NetBSD Foundation, Inc. All rights reserved.
Copyright (C) 1999 WIDE Project. All rights reserved.
Copyright (c) 1999, 2000 Jason L. Wright (jason@thought.net) All rights reserved.
Copyright (c) 1999, 2000 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1999, 2000, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1999, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 2000 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 2000, 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 2000, 2001, 2002 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 2002 The NetBSD Foundation, Inc. All rights reserved.
Copyright 1998 Massachusetts Institute of Technology. All rights reserved.
Copyright 2001 Wasabi Systems, Inc. All rights reserved.
Portions Copyright (c) 1993 by Digital Equipment Corporation.
Portions Copyright (c) 1995 by International Business Machines, Inc.
Copyright (c) 1983, 1989 The Regents of the University of California. All rights reserved.
Copyright (c) 1996 by Internet Software Consortium. All rights reserved.
Copyright (c) 1980, 1986, 1989 Regents of the University of California. All rights reserved.
Copyright (c) 1988 The Regents of the University of California. All rights reserved.
Copyright (c) 1992, 1993 The Regents of the University of California. All rights reserved.
Copyright (c) 1994 Christopher G. Demetriou. All rights reserved.
Copyright (c) 1997 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1999 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 2001 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1996 Gardner Buchanan <gbuchanan@shl.com> All rights reserved.
Parts of the NetBSD Kernel are provided with the licences that are slightly different from the above Berkeley-formed
licence. Please refer the source code of the NetBSD Kernel about the details.
The source code of the NetBSD Kernel is provided by the NetBSD CVS Repositories
(http://cvsweb.netbsd.org/bsdweb.cgi/), and this product includes parts of the source code in the following directories.
http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/kern/
http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/net/
http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/netinet/
114
14. General Information
L This product contains Net-SNMP software and is using it based on the following licence conditions.
---- Part 1: CMU/UCD copyright notice: (BSD like) ----Copyright 1989, 1991, 1992 by Carnegie Mellon University
Derivative Work - 1996, 1998-2000
Copyright 1996, 1998-2000 The Regents of the University of California
All Rights Reserved
Permission to use, copy, modify and distribute this software and its documentation for any purpose and
without fee is hereby granted, provided that the above copyright notice appears in all copies and that
both that copyright notice and this permission notice appear in supporting documentation, and that the
name of CMU and The Regents of the University of California not be used in advertising or publicity
pertaining to distribution of the software without specific written permission.
CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL CMU OR THE REGENTS OF THE
UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM THE LOSS OF USE, DATA OR
PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
SOFTWARE.
---- Part 2: Networks Associates Technology, Inc copyright notice (BSD) ----Copyright (c) 2001-2003, Networks Associates Technology, Inc
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of the Networks Associates Technology, Inc nor the names of its contributors may
be used to endorse or promote products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
115
14. General Information
---- Part 3: Cambridge Broadband Ltd. copyright notice (BSD) ----Portions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.
* The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
---- Part 4: Sun Microsystems, Inc. copyright notice (BSD) ----Copyright © 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
California 95054, U.S.A. All rights reserved.
Use is subject to license terms below.
This distribution may include materials developed by third parties.
Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
116
14. General Information
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Also this product contains software which includes following notices and licences.
/***********************************************************
Copyright 1988, 1989, 1990 by Carnegie Mellon University
Copyright 1989 TGV, Incorporated
All Rights Reserved
Permission to use, copy, modify, and distribute this software and its documentation for any purpose and
without fee is hereby granted, provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in supporting documentation, and that the
name of CMU and TGV not be used in advertising or publicity pertaining to distribution of the software
without specific, written prior permission.
CMU AND TGV DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL CMU OR
TGV BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR
IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
******************************************************************/
L This product contains NetBSD software and is using it based on the following licence conditions.
/** Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by Chris Torek.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided
* that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
* following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
* the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
117
14. General Information
L This product contains NetBSD software and is using it based on the following licence conditions.
/*
* Copyright (c) 1989 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by Tom Truscott.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided
* that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
* following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
* the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software must display the following
* acknowledgement:
* This product includes software developed by the University of California, Berkeley and its
* contributors.
* 4. Neither the name of the University nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
L This product contains NetBSD software and is using it based on the following licence conditions.
/*
* Copyright (c) 1987, 1993, 1994
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided
* that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
* following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
* the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software must display the following
* acknowledgement:
* This product includes software developed by the University of California, Berkeley and its
* contributors.
* 4. Neither the name of the University nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
118
14. General Information
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
L This product contains NetBSD software and is using it based on the following licence conditions.
/** Copyright (c) 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by Chris Torek.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided
* that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
* following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
* the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
L This product contains thttpd software that ACMELabs developed and is using it based on the following licence
conditions.
Copyright 1995,1998,1999, 2000 by Jef Poskanzer <jef@acme.com>.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
119
14. General Information
L This product contains NetBSD software and is using it based on the following licence conditions.
/** Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by Chris Torek.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided
* that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
* following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
* the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
L This product contains NetBSD software and is using it based on the following licence conditions.
/** Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by Chris Torek.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided
* that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
* following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
* the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
120
14. General Information
L This product contains NetBSD software and is using it based on the following licence conditions.
/*
* Copyright (c) 1989 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by Tom Truscott.
*
* Redistribution and use in source and binary forms, with or without modification, are permitted provided
* that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
* following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
* the following disclaimer in the documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software must display the following
* acknowledgement:
* This product includes software developed by the University of California, Berkeley and its
* contributors.
* 4. Neither the name of the University nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
L JPEG
This software is based in part on the work of the Independent JPEG Group.
121
15. Index
15. Index
15.1 Index
#
#101 Date and time: 22
#102 Your logo: 23
#103 Your fax number: 23
#110 Language: 59
#120 Dialing mode: 19
#121 Flash time: 59
#155 Change password: 59
#158 Maintenance time: 60
#161 Ringer pattern: 60
#210 FAX ring count: 60
#216 Automatic caller’s list: 60
#226 Time adjustment: 60
#380 Paper size in the standard input tray: 60
#382 Paper size in the optional input tray: 60
#383 Paper type: 60
#401 Confirmation report: 45, 62
#402 Automatic journal report: 46, 62
#403 Power save: 61
#411 Overseas mode: 62
#412 Delayed send: 63
#413 ECM selection: 63
#416 Connecting tone: 63
#418 Maximum fax speed: 63
#430 Distinctive Ring: 57
#431 Fax ring pattern: 57
#432 Auto reduction: 64
#434 Fax activation code: 64
#437 Memory reception alert: 64
#438 Friendly reception: 64
#440 Paper input tray setting for fax: 64
#442 PC fax setting: 65
#443 PC fax reception: 24
#445 Legal-size fax send: 65
#448 Fax preview mode: 65
#449 Automatic deletion: 65
#459 Set fax features to default: 65
#460 Paper input tray setting for copy: 67
#461 Default copy resolution: 67
#462 Contrast hold: 67
#463 Default operation mode: 61
#464 Mode timer: 61
#467 Page layout hold: 67
#468 Zoom hold: 67
#469 Collate hold: 67
#470 Duplex hold: 67
#471 Copy input tray select: 67
#480 Drum cleaning: 108
#482 Toner save: 15, 61
#485 Colour calibration for all colours: 80
#486 Colour calibration for cyan: 80
#487 Colour calibration for magenta: 80
#488 Colour calibration for yellow: 80
#489 Colour calibration for black: 80
#493 Scan mode: 71
#494 Scan parameter hold: 71
#495 Monochrome scan type: 71
122
#500 DHCP mode: 73
#501 IP address: 73
#502 Subnet mask: 73
#503 Default gateway: 73
#504 DNS server #1: 73
#505 DNS server #2: 73
#507 Machine name: 73
#508 MAC address: 73
#532 IP filtering: 74
#533 Auto IP: 74
#534 HTTPD: 74
#535 IPv6 protocol: 74
#565 Paper input tray setting for the scan to e-mail
print feature: 74
#669 Paper input tray setting for direct print: 75
#672 File sort: 75
#673 File display mode: 75
#760 Paper input tray in PCL: 68
#762 Number of copies in PCL: 68
#763 Paper size in PCL: 68
#764 Image reduction in PCL: 68
#765 Recording paper direction in PCL: 68
#766 A4 wide printing in PCL: 68
#767 Line per page in PCL: 68
#768 Font source in PCL: 68
#769 Font number in PCL: 69
#770 Font pitch/point in PCL: 69
#771 Symbol set in PCL: 69
#772 Line breaks in PCL: 69
#773 Auto continue mode: 69
#774 Data timeout: 69
#775 Monochrome page detect: 69
#776 Mutual A4/letter print: 70
A Address list: 108
Answering machine: 52
Auto continue mode (Feature #773): 69
Auto IP (Feature #533): 74
Automatic deletion (Feature #449): 65
Automatic document feeder: 21, 41, 46
Automatic duplex unit (optional): 82
Auto reduction (Feature #432): 64
B Basic features: 59
Broadcast programming list: 108
Broadcast transmission: 48
C Call Display
Calling back: 55
Storing: 56
Caller’s list (Feature #216): 60
Character entry: 78
Cleaning: 105, 106, 107
Collate hold (Feature #469): 67
Colour calibration
Black (Feature #489): 80
Cyan (Feature #486): 80
Magenta (Feature #487): 80
Offset (Feature #485): 80
Yellow (Feature #488): 80
Colour test: 108
15. Index
Confirmation report (Feature #401): 45, 62
Connecting tone (Feature #416): 63
Connections: 18
LAN: 18
USB: 25
Contrast hold (Feature #462): 67
Copy: 40
Booklet: 44
Collation: 42
Duplex: 44
Easy repeat: 42
N in 1: 43
N in 1 (Separate): 43
Poster: 43
Proof set: 42
Quick ID: 42
Reserve: 43
Zoom: 40
Copy features: 67
Copy input tray select (Feature #471): 67
D Data timeout (Feature #774): 69
Date and time (Feature #101): 22
Default copy resolution (Feature #461): 67
Default gateway (Feature #503): 73
Default operation mode (Feature #463): 61
Delayed transmission (Feature #412): 63
DHCP mode (Feature #500): 73
Dialing mode (Feature #120): 19
Directory: 46
Direct print
File display mode (Feature #673): 75
File sort (Feature #672): 75
Paper input tray (Feature #669): 75
Direct print feature: 75
Display
Error messages: 85
Distinctive Ring service (Feature #430): 57
DNS server #1 (Feature #504): 73
DNS server #2 (Feature #505): 73
Document size: 20
Drum cartridge: 11
Drum cleaning (Feature #480): 108
Drum life: 111
Duplex hold (Feature #470): 67
E ECM selection (Feature #413): 63
E-mail destinations: 66, 71
E-mail server information: 34, 66, 71
Envelope: 30
Error messages: 84, 85
Extension telephone: 50
F Fax activation code (Feature #434): 64
Fax features: 62
Fax number (Feature #103): 23
FAX ONLY mode: 50
Fax preview mode (Feature #448): 65
FAX ring count (Feature #210): 60
Flash time (Feature #121): 59
Friendly reception (Feature #438): 64
FTP server information: 66, 72, 75
FTP server list: 108
H HTTPD (Feature #534): 74
I
Input tray (optional): 82
IP address (Feature #501): 73
IP filtering (Feature #532): 74
IPv6 protocol (Feature #535): 74
J
Jams
Document: 104
Recording paper: 99
Journal report (Feature #402): 46, 62
Junk fax prohibitor: 53
L Label: 30
LAN features: 73
Language (Feature #110): 59
Legal-size fax send (Feature #445): 65
Logo (Feature #102): 23
M MAC address (Feature #508): 73
Machine name (Feature #507): 73
Maintenance time (Feature #158): 60
Maximum fax speed (Feature #418): 63
Memory reception alert (Feature #437): 64
Mode timer (Feature #464): 61
Monochrome page detect (Feature #775): 69
Monochrome scan type (Feature #495): 71
Multi-Function Station software
Activating: 27
Installing: 25
Uninstalling: 26
Mutual A4/letter print (Feature #776): 70
N Navigator directory
Sending faxes: 47
Storing: 46
Network features: 76
O OCR software: 36
Optional automatic duplex unit: 82
Optional input tray: 82
Overseas mode (Feature #411): 62
P Page layout hold (Feature #467): 67
Paper input tray setting
Copy (Feature #460): 67
Direct print (Feature #669): 75
Fax (Feature #440): 64
PCL (Feature #760): 68
Scan to e-mail print (Feature #565): 74
Paper size
Optional input tray (Feature #382): 60
Standard input tray (Feature #380): 60
Paper type (Feature #383): 60
Password (Feature #155): 59
PC fax reception (Feature #443): 24
PC fax setting (Feature #442): 65
PCL
A4 wide printing (Feature #766): 68
Font number (Feature #769): 69
Font pitch/point (Feature #770): 69
123
15. Index
Font source (Feature #768): 68
Image reduction (Feature #764): 68
Line breaks (Feature #772): 69
Line per page (Feature #767): 68
Number of copies (Feature #762): 68
Paper input tray (Feature #760): 68
Paper size (Feature #763): 68
Recording paper direction (Feature #765): 68
Symbol set (Feature #771): 69
PCL font list: 108
PC print features: 68
Power failure: 97
Power save (Feature #403): 61
Power switch: 19
Print
Duplex: 31
E-mail attachment: 34
FTP server: 33
SD card: 31
Special media: 30
Printer test: 108
Programming: 58
Pull scan: 38
Scan application: 38
Viewer: 38
Push scan: 35
E-mail: 36
E-mail server: 36
File: 36
FTP: 37
OCR: 36
SD card: 37
Viewer: 35
Q Quick scan: 46
R Receiving faxes
Automatically: 50
Computer: 54
Display: 51
Manually: 50
Recording paper: 15
Recording paper size: 110
Redialing: 45, 47
Reports
Address: 108
Broadcast programming: 108
Broadcast sending: 48
Call Display: 60, 108
Colour test: 108
Confirmation: 45, 62
FTP server: 108
Journal: 46, 108
PCL font: 108
Power down: 97
Printer test: 108
Setup: 108
Telephone number: 108
Reset fax features (Feature #459): 65
Resolution: 40, 45
124
Ringer pattern (Feature #161): 60
Ring pattern for Distinctive Ring (Feature #431): 57
S Scan features: 71
Scan mode (Feature #493): 71
Scanner glass: 20, 40, 45
Scan parameter hold (Feature #494): 71
Scan to e-mail print: 34
SD card: 80
Inserting: 81
Printing: 31
Saving: 37, 51
Sending faxes
Broadcast: 48
Computer document: 49
From memory: 46
Manually: 45
Navigator directory: 47
Set fax default (Feature #459): 65
Setup list: 108
Storing
Broadcast: 48
E-mail destinations: 66, 71
Navigator directory: 46
Subnet mask (Feature #502): 73
T Telephone number list: 108
TEL mode: 50
Time adjustment (Feature #226): 60
Toner cartridge: 11
Toner life: 110
Toner save (Feature #482): 15, 61
Transparency: 30
V Volume: 22
W Waste toner cartridge: 10
Waste toner cartridge life: 111
Z Zoom hold (Feature #468): 67
Notes
125
Notes
126
Notes
127
PNQX1938ZA
PNQX1938ZA
CM0209DY0CM0209DY0
(CD) <C> (CD)
Download PDF
Similar pages