QuickSpecs
HP E2910 al Switch Series
Overview
HP E2910-24G al Switch
HP E2910-48G al Switch
HP E2910-48G-PoE+ al Switch
Models
HP E2910-24G al Switch
HP E2910-48G al Switch
HP E2910-24G-PoE+ al Switch
HP E2910-48G-PoE+ al Switch
J9145A
J9147A
J9146A
J9148A
Key Features
High-performance Gigabit Ethernet access switch
Four optional 10 GbE (CX4 and/or SFP+)
IEEE 802.3af/802.3at functionality ( PoE/PoE+)
Layer 2 and Layer 3 plus static IP and RIP routing
Lifetime warranty, sFlow, ACLs, and rate limiting
DA - 13280
Worldwide — Version 12 — November 16, 2010
Page 1
QuickSpecs
HP E2910 al Switch Series
Overview
Product overview
The HP E2910 al Switch Series consists of four switches: the HP E2910-24G al and E2910-24G-PoE+ al Switches with 24
10/100/1000 ports, and the HP E2910-48G al and E2910-48G-PoE+ al Switches with 48 10/100/1000 ports. Each switch has
four dual-personality ports for 10/100/1000 or mini-GBIC connectivity. In addition, the E2910 al Switch Series supports up to four
optional 10 Gigabit Ethernet (CX4 and/or SFP+) ports, thereby offering the most flexible and easy-to-deploy uplinks in its class.
Together with static and RIP IPv4 routing, robust security and management, enterprise-class features, free lifetime warranty, and free
software updates, the 2910 series is a cost-effective, scalable solution for customers who are building high-performance networks.
These switches can be deployed at enterprise edge and remote branch offices, converged networks, and data center top of rack.
Features and Benefits
Quality of Service (QoS)
Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight queues
Layer 4 prioritization:
prioritization enables prioritization based on TCP/UDP port numbers
Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol,
TCP/UDP port number, source port, and DiffServ
Rate Limiting:
Limiting per-port ingress enforced maximums
Connectivity
10 Gbps Ethernet connectivity:
connectivity up to four optional and flexible 10-Gigabit ports (CX4 and/or SFP+), with optional
interconnect kit for short-distance connectivity
IPv6:
IPv6
IPv6 host:
host allows the switches to be managed and deployed at the edge of IPv6 networks
Dual stack (IPv4/IPv6): provides transition mechanism from IPv4 to IPv6; supports connectivity for both protocols
MLD snooping:
snooping forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding
the network
IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices
such as IP phones, wireless access points, and security cameras
IEEE 802.3at Power Over Ethernet Plus:
Plus provides up to 30 W per port to IEEE 802.3 for PoE/PoE+ powered devices such
as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras
Pre-standard PoE support:
support detects and provides power to pre-standard PoE devices; see list of supported devices in the
product FAQ at: www.hp.com/networking/support
Auto-MDIX:
Auto-MDIX automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
Dual-personality functionality:
functionality includes four 10/100/1000 ports or SFP slots for optional fiber connectivity such as GigabitSX, -LX, -LH, 100-FX, 100-BX, and 1000-BX
Single IP Address Management:
Management single IP address management for a virtual stack of up to 16 switches
Performance
High-performance architecture:
architecture 128 Gbps switching fabric with up to 95 Mpps (24-port switches) and 176 Gbps switching
fabric with up to 131 Mpps (48-port switches)
Selectable queue configurations:
configurations increase performance by selecting the number of queues and associated memory
buffering that best meet the requirements of your network applications
Resiliency and high availability
IEEE 802.1s Multiple Spanning Tree:
Tree provides high link availability in multiple VLAN environments by allowing multiple
spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
DA - 13280
Worldwide — Version 12 — November 16, 2010
Page 2
QuickSpecs
HP E2910 al Switch Series
Overview
IEEE 802.3ad Link Aggregation Protocol (LACP) and HP port trunking:
trunking support up to 24 trunks, each with up to 8 links
(ports) per trunk
Optional redundant power supply:
NOTE: HP E620 Redundant/External
supply supplies backup power in case of power failure (NOTE:
Power Supply provides only RPS functionality)
Manageability
RMON, XRMON, and sFlow:
sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and
events
Uni-Directional Link Detection (UDLD): monitors a link between two switches and blocks the ports on both ends of the link if
the link goes down at any point between the two devices
Command authorization:
authorization leverages RADIUS to link a custom list of CLI commands to individual network administrator's
login; it also provides an audit trail
Dual flash images:
images provides independent primary and secondary operating system files for backup while upgrading
Multiple configuration files:
files allow multiple configuration files to be stored to flash image
Friendly port names:
names allow assignment of descriptive names to ports
Find-Fix-Inform:
Find-Fix-Inform finds and fixes common network problems automatically, then informs administrator
Software updates:
updates free downloads from the Web
Troubleshooting:
Troubleshooting ingress and egress port monitoring enable network problem solving
Layer 2 switching
VLAN support and tagging:
tagging supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
GARP VLAN Registration Protocol (GVRP): allows automatic learning and dynamic assignment of VLANs
Jumbo packet support:
support supports up to 9220-byte frame size to improve performance of large data transfers
IEEE 802.1v protocol VLANs:
VLANs isolate select non-IPv4 protocols automatically into their own VLANs
Layer 3 routing
Static IP routing:
routing provides manually configured routing; includes ECMP capability
Routing Information Protocol (RIP): provides RIPv1 and RIPv2 routing
Security
Multiple user authentication methods:
methods
IEEE 802.1X:
802.1X industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in
conjunction with a RADIUS server
Web-based authentication:
authentication similar to IEEE 802.1X, it provides a browser-based environment to authenticate clients
that do not support the IEEE 802.1X supplicant
MAC-based authentication:
authentication client is authenticated with the RADIUS server based on the client's MAC address
Authentication flexibility:
flexibility
Multiple IEEE 802.1X users per port:
port provides authentication of up to eight IEEE 802.1X users per port; prevents user
"piggybacking" on another user's IEEE 802.1X authentication
Concurrent IEEE 802.1X and Web or MAC authentication schemes per port:
port switch port will accept any of IEEE
802.1X and either Web or MAC authentications
Access control lists (ACLs): provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination
TCP/UDP port number
Identity-driven ACL:
ACL enables implementation of a highly granular and flexible access security policy and VLAN assignment
specific to each authenticated network user
Dynamic ARP protection:
protection blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
DHCP protection:
protection blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
DA - 13280
Worldwide — Version 12 — November 16, 2010
Page 3
QuickSpecs
HP E2910 al Switch Series
Overview
Port monitoring for network threats:
threats provides sampled port traffic using sFlow technology to the HP Network Immunity
Manager (NIM) application for Network Behavior Anomaly Detection (NBAD) analysis to detect threats and mitigate threats at
the port where the threat originated
Source-port filtering:
filtering allows only specified ports to communicate with each other
RADIUS/TACACS+:
RADIUS/TACACS+ eases switch management security administration by using a password authentication server
Secure Shell (SSHv2): encrypts all transmitted data for secure, remote command-line interface (CLI) access over IP networks
Secure File Transfer Protocol (FTP): allows secure file transfer to and from the switch; protects against unwanted file
downloads or unauthorized copying of switch configuration file
Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the
switch
Port security:
security allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout:
lockout prevents particular configured MAC addresses from connecting to the network
Switch management logon security:
security can require either RADIUS or TACACS+ authentication for secure switch CLI logon
STP BPDU port protection:
protection blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged
BPDU attacks
USB Secure Autorun (requires HP PCM+): deploys, diagnoses, and updates switch using a USB flash drive; works with a
secure credential to prevent tampering
STP Root Guard:
Guard protects root bridge from malicious attack or configuration mistakes
Custom banner:
banner displays security policy when users log in to the switch
Per-port broadcast throttling:
throttling selectively configures broadcast control on heavy traffic port uplinks
Convergence
IP multicast snooping and data-driven IGMP:
IGMP automatically prevents flooding of IP multicast traffic
LLDP-MED (Media Endpoint Discovery): is a standard extension of LLDP that stores values for parameters such as QoS and
VLAN to automatically configure network devices such as IP phones
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): is an automated device discovery protocol for easy mapping by
network management applications
PoE and PoE+ allocations:
allocations supports multiple methods (automatic, IEEE 802.3at dynamic, LLDP-MED fine-grain, IEEE
802.3af device class, or user specified) to allocate and manage PoE/PoE+ power for more efficient energy savings
Monitor and diagnostics
Port mirroring:
mirroring enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
Warranty and support
Lifetime warranty:
warranty for as long as you own the product with advance replacement and next-business-day delivery (available in
most countries)*
Electronic and telephone support:
support limited electronic and telephone support is available from HP; refer to:
www.hp.com/networking/warranty for details on the support provided and the period during which support is available
Software releases:
releases refer to: www.hp.com/networking/warranty for details on the software releases provided and the period
during which software releases are available for your product(s)
* Hardware warranty replacement for as long as you own the product, with next business day advance replacement (available in
most countries) with a five-year hardware warranty replacement for the disk drive included with HP AllianceONE Services zl Module,
HP Threat Management Services zl Module, HP PCM+ Agent with AllianceONE Services zl Module, and HP E-MSM765 zl Mobility
Controller. For details, refer to the HP Software License, Warranty, and Support booklet at: www.hp.com/networking/warranty.
DA - 13280
Worldwide — Version 12 — November 16, 2010
Page 4
QuickSpecs
HP E2910 al Switch Series
Technical Specifications
HP E2910-24G al Switch (J9145A)
20 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE
Ports
802.3ab Type 1000Base-T); Media Type: Auto-MDIX; Duplex: 10Base-T/100Base-TX: half or full;
1000Base-T: full only
4 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type
10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a miniGBIC slot (for use with mini-GBIC transceivers)
1 RJ-45 serial console port
Supports a maximum of 4 10-GbE ports, with optional module
14.4(d) x 17.4(w) x 1.73(h) in. (36.58 x 44.2 x 4.4 cm) (1U height)
Physical characteristics Dimensions
10.92 lb. (4.95 kg)
Dual ARM1156T2S @ 515 MHz, 4 MB flash, 1 GB compact flash, 512 MB
SDRAM; packet buffer size: 6 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal
surface mounting only.
Performance
< 2.9 µs (FIFO 64-byte packets)
1000 Mb Latency
< 1.3 µs (FIFO 64-byte packets)
10 Gbps Latency
up to 95 million pps (64-byte packets)
Throughput
128 Gbps
Switching capacity
2,000 entries
Routing table size
MAC address table size 16,000 entries
Environment
Operating temperature 32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
Operating relative
humidity
-40°F to 158°F (-40°C to 70°C)
Non-operating/
Storage temperature
15% to 95% @ 149°F (65°C), non-condensing
Non-operating/
Storage relative humidity
up to 10,000 ft. (3 km)
Altitude
Power: 53.5 dB, Pressure: 39.4 dB; DIN 45635T.19 per ISO 7779
Acoustic
Electrical characteristics Description
The switch automatically adjusts to any voltage between 100-127 and 200240 volts and either 50 or 60 Hz
279 BTU/hr (295 kJ/hr)
Maximum heat
dissipation
100-127 / 200-240 VAC
Voltage
1.7 / 0.9 A
Current
49 W
Idle power
Maximum power rating 82 W
50 / 60 Hz
Frequency
Memory and processor
Weight
Processor
DA - 13280
Worldwide — Version 12 — November 16, 2010
Page 5
QuickSpecs
HP E2910 al Switch Series
Technical Specifications
Notes
Safety
Emissions
Immunity
Management
Notes
Services
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
FCC part 15 Class A; EN 55022/CISPR-22 Class A; VCCI Class A
EN 55024, CISPR 24
EN
IEC 61000-4-2; 4 kV CD, 8 kV AD
ESD
IEC 61000-4-3; 3 V/m
Radiated
EFT/Burst
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
IEC 61000-4-5; 1 kV / 2 kV AC, 1 kV signal, 0.5 kV DC
Surge
IEC 61000-4-6; 3 V
Conducted
IEC 61000-4-8; 1 A/m
Power frequency
magnetic field
IEC 61000-4-11; > 95% reductions, 0.5 period; 30% reduction, 25 periods
Voltage dips and
interruptions
IEC 61000-3-2
Harmonics
IEC 61000-3-3
Flicker
HP PCM+; HP PCM; command-line interface; Web browser; out-of-band management (serial RS232C)
When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends
with the letter "B" or later, e.g., J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U2855E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U2856E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (U6304E)
3-year, 24x7 SW phone support, software updates (UE262E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR868E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR869E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR870E)
4-year, 24x7 SW phone support, software updates (UR871E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR872E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR873E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR874E)
5-year, 24x7 SW phone support, software updates (UR875E)
3 Yr 6 hr Call-to-Repair Onsite (UW356E)
4 Yr 6 hr Call-to-Repair Onsite (UW357E)
5 Yr 6 hr Call-to-Repair Onsite (UW358E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
Standards and protocols Device management
DA - 13280
MIBs
Worldwide — Version 12 — November 16, 2010
Page 6
QuickSpecs
HP E2910 al Switch Series
Technical Specifications
(applies to all products in RFC 1591 DNS (client)
series)
HTML and telnet management
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and
Port
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 868 Time Protocol
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1350 TFTP Protocol (revision 2)
RFC 2030 Simple Network Time Protocol (SNTP) v4
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 3046 DHCP Relay Agent Information Option
IP multicast
RFC 3376 IGMPv3 (host joins only)
IPv6
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2710 Multicast Listener Discovery (MLD) for
IPv6
RFC 2925 Remote Operations MIB (Ping only)
RFC 3019 MLDv1 MIB
RFC 3315 DHCPv6 (client only)
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNS Extension for IPv6
RFC 3810 MLDv2 (host joins only)
RFC 4022 MIB for TCP
RFC 4113 MIB for UDP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
DA - 13280
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1724 RIPv2 MIB
RFC 2021 RMONv2 MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 2819 Four groups of RMON: 1 (statistics), 2
(history), 3 (alarm) and 9 (events)
RFC 3176 sFlow
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3
XRMON
QoS/CoS
RFC 2474 DiffServ Precedence, including 8
queues/port
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
Ingress Rate Limiting
Security
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2138 RADIUS Authentication
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
Worldwide — Version 12 — November 16, 2010
Page 7
QuickSpecs
HP E2910 al Switch Series
Technical Specifications
RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Autoconfiguration
HP E2910-48G al Switch (J9147A)
44 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE
Ports
802.3ab Type 1000Base-T); Media Type: Auto-MDIX; Duplex: 10Base-T/100Base-TX: half or full;
1000Base-T: full only
4 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type
10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a miniGBIC slot (for use with mini-GBIC transceivers)
1 RJ-45 serial console port
Supports a maximum of 4 10-GbE ports, with optional module
14.4(d) x 17.42(w) x 1.73(h) in. (36.58 x 44.25 x 4.4 cm) (1U height)
Physical characteristics Dimensions
11.2 lb. (5.08 kg)
Weight
Dual ARM1156T2S @ 515 MHz, 4 MB flash, 1 GB compact flash, 512 MB
Memory and processor Processor
SDRAM; packet buffer size: 6 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal
Mounting
surface mounting only.
< 2.9 µs (FIFO 64-byte packets)
Performance
1000 Mb Latency
< 1.3 µs (FIFO 64-byte packets)
10 Gbps Latency
up to 131 million pps
Throughput
176 Gbps
Switching capacity
2,000 entries
Routing table size
MAC address table size 16,000 entries
Environment
Operating temperature 32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
Operating relative
humidity
-40°F to 158°F (-40°C to 70°C)
Non-operating/
Storage temperature
15% to 95% @ 149°F (65°C), non-condensing
Non-operating/
Storage relative humidity
up to 10,000 ft. (3 km)
Altitude
Power: 53.5 dB, Pressure: 39.4 dB; DIN 45635T.19 per ISO 7779
Acoustic
Electrical characteristics Achieved Miercom Certified Green Award
* Products within this series have achieved sufficient scores in each of the rated criteria to achieve the
Miercom Certified Green distinction Award. See the Specifications section of this series for more
information.
DA - 13280
Worldwide — Version 12 — November 16, 2010
Page 8
QuickSpecs
HP E2910 al Switch Series
Technical Specifications
Description
Maximum heat
dissipation
Voltage
Current
Idle power
Maximum power rating
Frequency
Notes
Safety
Emissions
Immunity
Management
Notes
Services
The switch automatically adjusts to any voltage between 100-127 and 200240 volts and either 50 or 60 Hz
356 BTU/hr (376 kJ/hr)
100-127 / 200-240 VAC
2.1 / 1.1 A
64 W
105 W
50 / 60 Hz
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
FCC part 15 Class A; EN 55022/CISPR-22 Class A; VCCI Class A
EN 55024, CISPR 24
EN
IEC 61000-4-2; 4 kV CD, 8 kV AD
ESD
IEC 61000-4-3; 3 V/m
Radiated
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
EFT/Burst
IEC 61000-4-5; 1 kV / 2 kV AC, 1 kV signal, 0.5 kV DC
Surge
IEC 61000-4-6; 3 V
Conducted
IEC 61000-4-8; 1 A/m
Power frequency
magnetic field
IEC 61000-4-11; > 95% reductions, 0.5 period; 30% reduction, 25 periods
Voltage dips and
interruptions
IEC 61000-3-2
Harmonics
IEC 61000-3-3
Flicker
HP PCM+; HP PCM; command-line interface; Web browser; out-of-band management (serial RS232C)
When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends
with the letter "B" or later, e.g., J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (H4496E)
3-year, 4-hour onsite, 24x7 coverage for hardware (H2893E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (U6319E)
3-year, 24x7 SW phone support, software updates (UE264E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR884E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR885E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR886E)
4-year, 24x7 SW phone support, software updates (UR887E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR888E)
DA - 13280
Worldwide — Version 12 — November 16, 2010
Page 9
QuickSpecs
HP E2910 al Switch Series
Technical Specifications
5-year, 4-hour onsite, 24x7 coverage for hardware (UR889E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR890E)
5-year, 24x7 SW phone support, software updates (UR891E)
3 Yr 6 hr Call-to-Repair Onsite (UW365E)
4 Yr 6 hr Call-to-Repair Onsite (UW366E)
5 Yr 6 hr Call-to-Repair Onsite (UW367E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
Standards and protocols Device management
(applies to all products in RFC 1591 DNS (client)
series)
HTML and telnet management
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and
Port
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 868 Time Protocol
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1350 TFTP Protocol (revision 2)
RFC 2030 Simple Network Time Protocol (SNTP) v4
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 3046 DHCP Relay Agent Information Option
IP multicast
RFC 3376 IGMPv3 (host joins only)
IPv6
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2710 Multicast Listener Discovery (MLD) for
IPv6
RFC 2925 Remote Operations MIB (Ping only)
DA - 13280
MIBs
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1724 RIPv2 MIB
RFC 2021 RMONv2 MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 2819 Four groups of RMON: 1 (statistics), 2
(history), 3 (alarm) and 9 (events)
RFC 3176 sFlow
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3
XRMON
QoS/CoS
RFC 2474 DiffServ Precedence, including 8
queues/port
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
Ingress Rate Limiting
Security
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2138 RADIUS Authentication
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
Worldwide — Version 12 — November 16, 2010
Page 10
QuickSpecs
HP E2910 al Switch Series
Technical Specifications
RFC 3019 MLDv1 MIB
RFC 3315 DHCPv6 (client only)
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNS Extension for IPv6
RFC 3810 MLDv2 (host joins only)
RFC 4022 MIB for TCP
RFC 4113 MIB for UDP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Autoconfiguration
HP E2910-24G-PoE+ al Switch (J9146A)
20 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE
Ports
802.3ab Type 1000Base-T); Media Type: Auto-MDIX; Duplex: 10Base-T/100Base-TX: half or full;
1000Base-T: full only
4 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type
10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a miniGBIC slot (for use with mini-GBIC transceivers)
1 RJ-45 serial console port
Supports a maximum of 4 10-GbE ports, with optional module
14.4(d) x 17.4(w) x 1.73(h) in. (36.58 x 44.2 x 4.39 cm) (1U height)
Physical characteristics Dimensions
12.34 lb. (5.6 kg)
Weight
Dual ARM1156T2S @ 515 MHz, 4 MB flash, 1 GB compact flash, 512 MB
Memory and processor Processor
SDRAM; packet buffer size: 6 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal
Mounting
surface mounting only
< 2.9 µs (FIFO)
Performance
1000 Mb Latency
< 1.3 µs (FIFO)
10 Gbps Latency
up to 95 million pps
Throughput
128 Gbps
Switching capacity
2,000 entries
Routing table size
MAC address table size 16,000 entries
Environment
Operating temperature 32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
Operating relative
humidity
-40°F to 158°F (-40°C to 70°C)
Non-operating/
Storage temperature
DA - 13280
Worldwide — Version 12 — November 16, 2010
Page 11
QuickSpecs
HP E2910 al Switch Series
Technical Specifications
Non-operating/
Storage relative humidity
Altitude
Acoustic
Electrical characteristics Description
Maximum heat
dissipation
Voltage
Current
Idle power
15% to 95% @ 149°F (65°C), non-condensing
up to 10,000 ft. (3 km)
Power: 51.5 dB, Pressure: 38.1 dB; DIN 45635T.19 per ISO 7779
The switch automatically adjusts to any voltage between 100-127 and 200240 volts and either 50 or 60 Hz
447 BTU/hr (472 kJ/hr), max. using PoE+
100-127 / 200-240 VAC
6.1 / 3.1 A
65 W
Maximum power rating
PoE power
Frequency
Notes
Safety
Emissions
Immunity
Management
Notes
Services
490 W
382 W
50 / 60 Hz
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE Power is the power supplied by the internal power supply, it is dependent
on the type and quantity of power supplies and may be supplemented with
the use of a External Power Supply (EPS).
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
FCC part 15 Class A; EN 55022/CISPR-22 Class A; VCCI Class A
EN 55024, CISPR 24
EN
IEC 61000-4-2; 4 kV CD, 8 kV AD
ESD
IEC 61000-4-3; 3 V/m
Radiated
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
EFT/Burst
IEC 61000-4-5; 1 kV / 2 kV AC, 1 kV signal, 0.5 kV DC
Surge
IEC 61000-4-6; 3 V
Conducted
IEC 61000-4-8; 1 A/m
Power frequency
magnetic field
IEC 61000-4-11; > 95% reductions, 0.5 period; 30% reduction, 25 periods
Voltage dips and
interruptions
IEC 61000-3-2
Harmonics
IEC 61000-3-3
Flicker
HP PCM+; HP PCM; command-line interface; Web browser; out-of-band management (serial RS232C)
When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends
with the letter "B" or later, e.g., J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U2855E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U2856E)
DA - 13280
Worldwide — Version 12 — November 16, 2010
Page 12
QuickSpecs
HP E2910 al Switch Series
Technical Specifications
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (U6304E)
3-year, 24x7 SW phone support, software updates (UE262E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR868E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR869E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR870E)
4-year, 24x7 SW phone support, software updates (UR871E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR872E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR873E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR874E)
5-year, 24x7 SW phone support, software updates (UR875E)
3 Yr 6 hr Call-to-Repair Onsite (UW356E)
4 Yr 6 hr Call-to-Repair Onsite (UW357E)
5 Yr 6 hr Call-to-Repair Onsite (UW358E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
Standards and protocols Device management
(applies to all products in RFC 1591 DNS (client)
series)
HTML and telnet management
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and
Port
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 868 Time Protocol
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1350 TFTP Protocol (revision 2)
RFC 2030 Simple Network Time Protocol (SNTP) v4
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 3046 DHCP Relay Agent Information Option
DA - 13280
MIBs
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1724 RIPv2 MIB
RFC 2021 RMONv2 MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 2819 Four groups of RMON: 1 (statistics), 2
(history), 3 (alarm) and 9 (events)
RFC 3176 sFlow
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3
XRMON
QoS/CoS
RFC 2474 DiffServ Precedence, including 8
queues/port
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
Ingress Rate Limiting
Worldwide — Version 12 — November 16, 2010
Page 13
QuickSpecs
HP E2910 al Switch Series
Technical Specifications
IP multicast
RFC 3376 IGMPv3 (host joins only)
IPv6
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2710 Multicast Listener Discovery (MLD) for
IPv6
RFC 2925 Remote Operations MIB (Ping only)
RFC 3019 MLDv1 MIB
RFC 3315 DHCPv6 (client only)
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNS Extension for IPv6
RFC 3810 MLDv2 (host joins only)
RFC 4022 MIB for TCP
RFC 4113 MIB for UDP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Autoconfiguration
Security
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2138 RADIUS Authentication
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
HP E2910-48G-PoE+ al Switch (J9148A)
44 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE
Ports
802.3ab Type 1000Base-T); Media Type: Auto-MDIX; Duplex: 10Base-T/100Base-TX: half or full;
1000Base-T: full only
4 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type
10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a miniGBIC slot (for use with mini-GBIC transceivers)
1 RJ-45 serial console port
Supports a maximum of 4 10-GbE ports, with optional module
14.4(d) x 17.42(w) x 1.73(h) in. (36.58 x 44.25 x 4.39 cm) (1U height)
Physical characteristics Dimensions
12.96 lb. (5.88 kg)
Weight
Dual ARM1156T2S @ 515 MHz, 4 MB flash, 1 GB compact flash, 512 MB
Memory and processor Processor
SDRAM; packet buffer size: 6 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal
Mounting
surface mounting only
< 2.9 µs (FIFO)
Performance
1000 Mb Latency
< 1.3 µs (FIFO)
10 Gbps Latency
up to 131 million pps
Throughput
DA - 13280
Worldwide — Version 12 — November 16, 2010
Page 14
QuickSpecs
HP E2910 al Switch Series
Technical Specifications
Environment
Switching capacity
Routing table size
MAC address table size
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/
Storage relative humidity
Altitude
Acoustic
Electrical characteristics Description
Maximum heat
dissipation
Voltage
Current
Idle power
Maximum power rating
PoE power
Frequency
Notes
Safety
Emissions
Immunity
176 Gbps
2,000 entries
16,000 entries
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
-40°F to 158°F (-40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
up to 10,000 ft. (3 km)
Power: 51.5 dB, Pressure: 38.1 dB; DIN 45635T.19 per ISO 7779
The switch automatically adjusts to any voltage between 100-127 and 200240 volts and either 50 or 60 Hz
667 BTU/hr (704 kJ/hr), max. using PoE+
100-127 / 200-240 VAC
6.4 / 3.2 A
89 W
556 W
382 W
50 / 60 Hz
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE Power is the power supplied by the internal power supply, it is dependent
on the type and quantity of power supplies and may be supplemented with
the use of a External Power Supply (EPS).
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
FCC part 15 Class A; EN 55022/CISPR-22 Class A; VCCI Class A
EN 55024, CISPR 24
EN
IEC 61000-4-2; 4 kV CD, 8 kV AD
ESD
IEC 61000-4-3; 3 V/m
Radiated
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
EFT/Burst
IEC 61000-4-5; 1 kV / 2 kV AC, 1 kV signal, 0.5 kV DC
Surge
IEC 61000-4-6; 3 V
Conducted
IEC 61000-4-8; 1 A/m
Power frequency
magnetic field
IEC 61000-4-11; > 95% reductions, 0.5 period; 30% reduction, 25 periods
Voltage dips and
interruptions
DA - 13280
Worldwide — Version 12 — November 16, 2010
Page 15
QuickSpecs
HP E2910 al Switch Series
Technical Specifications
Management
Notes
Services
Harmonics
IEC 61000-3-2
IEC 61000-3-3
Flicker
HP PCM+; HP PCM; command-line interface; Web browser; out-of-band management (serial RS232C)
When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends
with the letter "B" or later, e.g., J4858B, J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (H4496E)
3-year, 4-hour onsite, 24x7 coverage for hardware (H2893E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (U6319E)
3-year, 24x7 SW phone support, software updates (UE264E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR884E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR885E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR886E)
4-year, 24x7 SW phone support, software updates (UR887E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR888E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR889E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR890E)
5-year, 24x7 SW phone support, software updates (UR891E)
3 Yr 6 hr Call-to-Repair Onsite (UW365E)
4 Yr 6 hr Call-to-Repair Onsite (UW366E)
5 Yr 6 hr Call-to-Repair Onsite (UW367E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
Standards and protocols Device management
(applies to all products in RFC 1591 DNS (client)
series)
HTML and telnet management
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and
Port
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
DA - 13280
MIBs
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1724 RIPv2 MIB
RFC 2021 RMONv2 MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 2819 Four groups of RMON: 1 (statistics), 2
(history), 3 (alarm) and 9 (events)
RFC 3176 sFlow
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
Worldwide — Version 12 — November 16, 2010
Page 16
QuickSpecs
HP E2910 al Switch Series
Technical Specifications
RFC 868 Time Protocol
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1350 TFTP Protocol (revision 2)
RFC 2030 Simple Network Time Protocol (SNTP) v4
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 3046 DHCP Relay Agent Information Option
IP multicast
RFC 3376 IGMPv3 (host joins only)
IPv6
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2710 Multicast Listener Discovery (MLD) for
IPv6
RFC 2925 Remote Operations MIB (Ping only)
RFC 3019 MLDv1 MIB
RFC 3315 DHCPv6 (client only)
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNS Extension for IPv6
RFC 3810 MLDv2 (host joins only)
RFC 4022 MIB for TCP
RFC 4113 MIB for UDP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Autoconfiguration
DA - 13280
SNMPv1/v2c/v3
XRMON
QoS/CoS
RFC 2474 DiffServ Precedence, including 8
queues/port
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
Ingress Rate Limiting
Security
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2138 RADIUS Authentication
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
Worldwide — Version 12 — November 16, 2010
Page 17
QuickSpecs
HP E2910 al Switch Series
Accessories
HP E2910 al Switch
Series accessories
Modules
HP 2-port 10GbE CX4 al Module
HP 2-port 10GbE SFP+ al Module
HP 10-GbE al Switch Interconnect Kit
Transceivers
HP X111 100M SFP LC FX Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
HP X132 10G SFP+ LC SR Transceiver
HP X132 10G SFP+ LC LR Transceiver
HP X132 10G SFP+ LC LRM Transceiver
HP X121 1G SFP LC LH Transceiver
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
Cables
HP X242 SFP+ SFP+ 1m Direct Attach Cable
HP X242 SFP+ SFP+ 3m Direct Attach Cable
HP X242 SFP+ SFP+ 7m Direct Attach Cable
NEW HP 0.5 m Multimode OM3 LC/LC Optical Cable
NEW HP 1 m Multimode OM3 LC/LC Optical Cable
NEW HP 2 m Multimode OM3 LC/LC Optical Cable
NEW HP 5 m Multimode OM3 LC/LC Optical Cable
NEW HP 15 m Multimode OM3 LC/LC Optical Cable
NEW HP 30 m Multimode OM3 LC/LC Optical Cable
NEW HP 50 m Multimode OM3 LC/LC Optical Cable
NEW HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 1 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 2 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 5 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 15 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 30 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 50 m PremierFlex OM3+ LC/LC Optical Cable
EPS/RPS
HP E620 Redundant/External Power Supply
HP E630 Redundant and/or External Power Supply
Software
HP Identity Driven Manager 3.0 software--500-user license
DA - 13280
Worldwide — Version 12 — November 16, 2010
J9149A
J9008A
J9165A
J9054B
J9099B
J9100B
J9150A
J9151A
J9152A
J4860C
J4858C
J4859C
J9142B
J9143B
J9281B
J9283B
J9285B
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
BK837A
BK838A
BK839A
BK840A
BK841A
BK842A
BK843A
J8696A
J9443A
J9438A
Page 18
QuickSpecs
HP E2910 al Switch Series
Accessories
HP Identity Driven Manager 3.0 software--additional 1,000-user license
HP Identity Driven Manager 3.0 software--unlimited-user license
J9440A
J9439A
To learn more, visit: www.hp.com/networking
© Copyright 2008-2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change
without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
DA - 13280
Worldwide — Version 12 — November 16, 2010
Page 19
Download PDF
Similar pages