19.4” (49cm) HD LED LCD TV with built-in DVD

19.4” (49cm) HD LED LCD TV
with built-in DVD Player
Instruction Manual
L20PTC17a
24 Month Manufacturer’s Warranty
Table of Contents
Television Overview2
Remote Control4
Important Safety Instructions6
Contents in the Box9
Basic Setup Guide10
Caring for the Environment12
Connection Overview13
Input Source16
Channel Menu
17
Picture Menu22
Sound Menu24
Time Menu26
Option Menu29
Lock Menu35
Hotel Mode38
Media Player Operation40
Photo Menu43
Music Menu44
Movie Menu45
Text Menu46
EPG47
USB Record Function 49
DVD Player52
USB Multimedia Playback Format54
Troubleshooting55
Technical Specifications56
Television Overview
Back Buttons
5
Back
4
3
1.
Power Button: Turn television on / off
2.
Menu: Enter or exit from Menu
- Use CH +/- to select an option
- Use VOL +/- to adjust an item
3.
Source: Input select
4.
CH +/- : Select channel
5.
VOL +/- : Adjust volume
2
1
2
Television Overview
Back Inputs & Outputs
6
7
8
13
9
10
14
15
11
16
Back
6.
HDMI 1: HDMI connection port
7.
DC 12V Input
8.
HDMI 2 (ARC): HDMI (ARC) connection port
9.
VGA Input
10. AV Input: External AV signal input and relevant right / left sound channel inputs
11. ANT 75: Antenna (RF) connection
12. Earphone Output
13. Coaxial Output: Digital Audio output
14. Y - Pb - Pr: Component input and relevant video input
15. PC Audio Input
16. USB port
3
12
Remote Control Overview
1.
Power: Turn your television on or put on standby
mode.
2.
Mute: To mute sound. Press again or press VOL + to
unmute.
3.
0-9: Select a channel directly while watching television. The channel will change after 2 seconds.
4.
DTV / ATV: Switch between analog or digital television.
2
1
3
4
6
9
5
10
11
7
12
14
13
MTS
8
5.
Return to the previously viewed programme.
6.
S.MODE: Scroll through the different sound
settings.
7.
SLEEP: Select a timer before television turns itself off
automatically.
8.
MTS: Scroll through Audio modes.
9.
P.MODE: Scroll through different picture settings.
10. MENU: Opens the Main Menu.
11. SOURCE: Press to view and select available input
sources
12. ENTER and
: Allows you to navigate the
on-screen Menus and adjust the system settings to
your preference.
13. EXIT: Exit from the menu or sub-menu and cancel the
current in process ( if applicable )
14. DISPLAY: Press to display the source and channel’s
info.
15. VOL + / - : Increase / decrease the volume.
16. TV / RADIO: Allows you to switch between TV and
Radio modes while watching television.
Battery Installation
Remove the battery compartment cover on the rear of the remote control by unlocking the clip and
pulling off. Insert two AAA batteries inside the battery compartment with their + and – ends aligned
as indicated. Do not mix old and new batteries or different types of batteries. Press the cover until you
hear it click into place.
4
Remote Control Overview
17. EPG: (a) Launches the Electronic Programme Guide
(b) Rewind in PVR or Media Player mode.
18. TIMESHIFT: (a) DTV channel Timeshift Function.
(b) Play / pause during PVR or media playback.
19. CANCEL: When a page is selected in text mode, it may
take some time before it becomes available. CANCEL
button will return to TV mode. When the required page
is found, the page number will appear at the top of the
television. Press the CANCEL key to return to the text
mode.
20. INDEX: (a) Request the index page in Teletext mode.
(b) Exit while in PVR or Media Player.
21. SIZE: Change the size of display in Teletext mode.
22. REVEAL: Reveal or Hide the hidden words.
23. COLOURED BUTTONS: In the on-screen menus, these
buttons have different functions as specified by the
colours shown on-screen.
24. CH+ / - : Scan through channels.
25. FAV/LIST: Open the favourite list to select your
favourite channel(s)
26. ASPECT: (a) Adjust picture scale.
(b) Fast forward in Media Player mode.
27. FREEZE: Pause the programme.
28. SUB.PG: (a) Access the sub page.
(b) Next chapter in PVR or Media Player.
29. SUB TITLE: To show subtitles when watching digital
television (depending on availability).
30. HOLD: Hold On or Off for current page display.
31. TEXT: Switch Teletext On and Off.
32. REC LIST: Shows the list of recorded programmes.
33. REC: Begin recording current programme to a
connected USB storage device in PVR Mode.
Note: Teletext is not currently available in Australia.
5
MTS
15
18
32
33
26
17
19
20
21
22
23
24
27
16
25
28
29
30
31
Important Safety Instructions
Symbols
The symbols used in this manual or on the back cover of the television set means:
Read this Instruction Manual before use
Enclosures contain dangerous voltages
Please refer to important operating and maintenance/servicing instructions that
accompany the appliance
When using any electrical apparatus, always observer safety regulations and use basic safety precautions to reduce the risk of fire, electric shock, and/or personal injury including any of the following:
1.
Read, keep and follow this Instruction Manual, ensuring to heed all warnings.
2.
Keep out of reach of young children. This
television is not suitable for use by young
children or infirm persons without
supervision. Young children must be
supervised to ensure that they do not play
with the television.
3.
This television is not intended for use by
persons (including young children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they are supervised or
have been given instructions concerning
the use of the television by a person who is
responsible for their safety.
4.
Ensure that the television is positioned in a
stable location to avoid the risk of the
television falling. Many injuries, particularly
to children, can be avoided by taking simple
precautions such as:
- Using a stable and appropriately
sized television cabinet. Ensure its
stability by using a television safety
strap to attach the television to the cabinet. - Use the stand which has been
supplied with your television set.
- Ensuring the television is not
hanging over the edge of supporting
furniture.
- Not placing the television on tall
furniture (e.g. cupboards, book cases
etc.) without anchoring both the
furniture and the television to a suit
able support.
- Ensure that the television is placed
directly on supporting furniture,
avoiding placing fabric, cloth or
6
other materials between the television
and the supporting furniture.
- Educating children about the
dangers of climbing on furniture to
reach for the television and/or its
controls
5.
WARNING! Do not insert any objects into
any openings of the television.
14. Use the power cord with care - do not damage the power cord in any way. If the power
cord is damaged, it must be replaced by
either the manufacturer, the
manufacturer’s service agent or qualified
service personnel. The power cord must be
replaced only with an authorised
replacement from an authorised
service agent.
6.
WARNING! Do not touch any moving parts
of the television.
15. Only use attachments/accessories
specified by the manufacturer.
7.
WARNING! Do not use this television near
water, or in an area exposed to water
splashes or dripping. To avoid the risk of fire
or electric shock, do not expose this television to rain and/or moisture.
16. Unplug this television during lightning
storms or when unused for long periods of
time.
8.
9.
17. Please consider the environment when
disposing of any batteries.
WARNING! Do not place objects filled
with liquid, such as vases, on or above the
television.
18. Refer all servicing to qualified personnel.
Servicing is required when the apparatus
has been damaged in any way, such as
when the power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
DO NOT immerse in any liquid whilst in use
or whilst cleaning. Clean only with a damp
cloth and dry with a dry towel. Do not use
harsh abrasives as these may
damage plastic parts.
10. DO NOT block ventilation openings. Keep
away from curtains, newspapers and
restricted areas. Install in accordance with
specific manufacturer instructions. Always
allow sufficient space around the
television to avoid overheating.
19. WARNING! Do not use the television
outdoors.
20. For household use only; this television is not
intended for commercial use.
11. DO NOT install near heat sources such as
radiators, gas heaters, stoves or other
apparatus (including amplifiers) that
produce heat. Do not place the television in
direct sunlight.
21. This television is intended to be used in
household and similar applications such as;
- offices and other working
environments;
- farm houses;
- by clients in hotels, motels, bed
and breakfast and other residential
type environments.
12. WARNING! Do not place naked flame
sources, such as lit candles, on the
television.
22. If this apparatus is to be used by a third
party, please supply these instructions
with it.
13. WARNING! Connect to a suitable
100-240V ~ 50/60 Hz power supply only.
7
23. No liability will be accepted for any
personal injury or damage caused by
failure to follow these instructions.
sunshine, fire or the like.
26. The mains plus is used as the disconnect
device, the disconnect device shall remain
readily operable.
24. Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
27. WARNING! If the television is being used
on a vehicle, DO NOT use it while the vehicle is
moving.
25. Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as
8
Contents in the Box
Check that you have been provided with the following:
Television
DTV/ATV
P.MODE
S.MODE
MENU
SLEEP
SOURCE
ENTER
EXIT
DISPLAY
MTS
RECLIST
FAV/LIST
REC
FREEZE
EPG
ASPECT
CANCEL
SUB.PG
INDEX
TIMESHIFT
TV/RADIO
SUBTITLE
REVEAL
SIZE
REDG
REEN
HOLD
YELLOWC
TEXT
YAN
Remote Control
Power Adaptor
Screws
(3 qty)
Stand
Instruction Manual
9
AAA Batteries
(2 qty)
Quick Start Guide
Basic Setup Guide
Attach Base
Follow these instructions carefully to assemble the feet to the television.
1.
Lay your television screen down onto a soft and clean surface. Ensure that the surface will not
damage the screen.
2.
Match the base with the bottom of the television set.
3.
Fix the screws into the bottom of the television base, taking note of the screw driver size required
for this.
IMPORTANT: Ensure that you do not over-tighten the screws.
Position and Placement
Make sure that you place your television on supporting furniture that can bear its weight.
Do not expose the television near water, fire places and/or heating apparatuses such as
heaters, candles, lighting etc.
Ensure that the back of the television is free from obstructions in order to keep the
ventilation from being blocked.
10
Basic Setup Guide
Connecting the Antenna and Power
1. Connect one end of the antenna cable to the antenna socket (RF IN) at the back of the television set.
Please note that the antenna cable is not included with your television.
2. Plug the power adaptor into your nearest
power outlet. For your safety, we recommend
using a power outlet with a power surge
protector.
TV signal output
AC power outlet
Turning your Television On & First Time Installation
Press the
power button on the remote control to turn your television on. The television screen will
show the First Time Installation Menu.
•
Use the
buttons to select the OSD
Language to be used for On Screen
Display (OSD).
•
Scroll down and use the
buttons to select the Country.
•
Scroll down using the
select the OK.
•
Use the
buttons to select the TV
Connection type.
•
Scroll down and use the
buttons to select the Tune Type.
•
Scroll down using the
the OK.
buttons to
buttons to select
11
Basic Setup Guide
After the OSD Language, Country, TV
Connection Type and Tune Type have been
set, your television will start to automatically
tune channels onto your television.
Caring for the Environment
Responsible Disposal of Packaging
The packaging of your television has been selected from environmentally friendly materials and can
usually be recycled. Please ensure the packaging is disposed of correctly. Plastic wrap can be a suffocation hazard for babies and young children, so please ensure packaging materials are out of reach
and are safely disposed of, and are recycled where possible.
Responsible Disposal of Appliances
At the end of its working life, do not throw out this television with your household rubbish. An environmentally friendly method of disposal will ensure that valuable raw materials can be recovered and
used again. Electrical and electronic appliances contain materials and substances which, if handled or
disposed of incorrectly, could be potentially hazardous on the environment and human health.
Observe any local regulations regarding the disposal of electrical consumer goods and dispose of it
appropriately for recycling. Contact your local authorities for advice on recycling facilities in your area.
The plug must be rendered useless and the cable cut off directly behind the television to prevent misuse.
12
Connection Overview
The following pages outline the basic connection options available with this Linden television.
Audio/Video (AV) Input
Press the SOURCE button using either the remote control or the button located on the side of the television set and select the AV option.
Earphone Output
13
Connection Overview
PC Input
Press the SOURCE button on either the remote control or the button located on the side of the
television set and select the PC option.
14
Connection Overview
HDMI Input
Press the SOURCE button on either the remote control or the button located on the side of the
television set and select the appropriate HDMI option.
For HDMI2(ARC) Function,
please refer to HDMI CEC
Section on Page 32.
Component Video Input
Press the SOURCE button on either the remote control or the button located on the side of the television
set and select COMPONENT source.
AC IN
/
YPbPr Output
15
Connection Overview
USB Input
Press the SOURCE button on either the remote control or the button located on the side of the television
set and select the MEDIA option.
USB
Input Source
Press SOURCE button to display the input source list:
Antenna
UHF Broadcast Source
ATV
Analogue Television Source
AV
Audio/Video Input Source
YPbPr
Component Video Input Source
DVD
DVD Input Source
PC
PC Input Source
HDMI1/2(ARC) HDMI Input Source
Media Player
USB Input Source
Press
or SOURCE button to scroll through Input Source options.
Press ENTER button to select the highlighted input source. Check the selected Input Source has an
active device attached.
Press EXIT button to quit the Input Source menu.
16
Channel Menu
Press the MENU button to enter the Main Menu. Use the
1. Use the
buttons to select the Channel Menu.
buttons to select the option you want to adjust in the Channel Menu.
2. Press the ENTER button to adjust.
3. Press the ENTER button to save your adjustment and return to the previous menu.
Auto Tuning
Ensure that the Source is set to Antenna prior to Auto Tuning your television. Press SOURCE on your
remote control, and scroll down using the
buttons to select Antenna.
Press the MENU button, then scroll across to the Channel Menu, use the
Tuning, then press the ENTER button to enter the Auto Tuning sub-menu.
A pop up will appear. Select the
country of television operation. Once
selected, press the ENTER button to
begin the auto tuning.
17
buttons to select Auto
Channel Menu
This Channel Tuning page will appear when your
television is auto tuning. There is a progress bar
along the bottom showing the progress rate of
the television channel tuning.
Antenna - DVB-T Manual Tuning
DVB-T (Digital Video Broadcast Terrestrial) Tuning is used to manually tune digital television channels.
From the Channel Menu, use the
buttons to select DVB-T Manual Tuning, then press the ENTER
button to enter the DVB-T sub-menu.
Use the
buttons to select the channel you
want to tune, then press the ENTER button to
manually tune the channel.
A Signal Strength Indicator is shown along the
bottom of the DTV Manual Tuning sub-menu.
18
Channel Menu
Antenna - ATV Manual Tuning
This is used to manually tune analogue television channels.
From the Channel Menu, use the
buttons to select ATV Manual Tuning then press the
ENTER button to enter the ATV Manual Tuning sub-menu.
Use the
buttons to select the channel, then press the ENTER button to manually tune the channel.
Use the
buttons to scroll and adjust
the Storage, Sound and Color System.
Use the
buttons to scroll down to Channel,
then use the
buttons to select that channel
you want to tune.
Scroll down to Search, and this will start tuning
the selected channel.
A pop up will appear showing the progress of
the auto tuning will appear.
19
Channel Menu
Programme Edit / Channel Edit
The Programme Edit sub-menu allows you to delete, move or skip television channels which have been
tuned onto your television. From the Channel Menu, use the
buttons to scroll and select Programme
Edit, then press the ENTER button to enter the Programme Edit sub-menu.
From the Programme Edit sub-menu, use the
buttons to select the desired channel to edit.
Press the RED button to delete the selected channel.
Press the BLUE button to skip
the selected channel.
Press the FAV button to add or remove the channel
to your favourite list. Removing a channel will make
your television skip the channel automatically when
using the CH+/- buttons to scroll through the
channels.
Signal Information
This allows you to see the strength of the signal received by your television, and is only available when
there is signal from digital television.
From the Channel Menu, use the
buttons to select Signal Information then press the ENTER button
to enter the Signal Information sub-menu.
Logical Channel Numbering (LCN)
This allows the television to automatically match the television’s channel numbers to the local broadcast’s Electronic Programme Guide (EPG) channel numbers.
From the Channel Menu, use the
buttons to select LCN then press the ENTER button to enter the
LCN sub-menu and select ON or OFF.
20
Channel Menu
Software Update (OAD)
This television model supports new software update in a wireless format when there is new software
available. If there is new software available for this model, the new software will be uploaded via the
broadcasting system to your local television channel.
From the Channel Menu, use the
buttons to select Software Update (OAD), then press the
ENTER button to enter the Software Update (OAD) sub-menu. Follow the on-screen prompts to install
the new software and set it to update automatically.
Software Update (USB)
For Service Use Only. Please contact our Customer Support Line on1300 530 800 for further details.
Please note that programming incorrect software onto the television can compromise the functions of
the television and void the warranty.
21
Picture Menu
Press MENU button to display the Main Menu.
Press
buttons select Picture in the Main Menu, then press ENTER or
button to enter.
1.
Press
buttons to select options in the PICTURE menu.
2.
Press ENTER and
3.
Press MENU button to save your adjustments and return back to the previous menu.
buttons to adjust settings for Brightness, Contrast etc.
Picture Mode
From the Picture Menu, use the
enter the Picture Mode sub-menu.
buttons to select Picture Mode then press the ENTER button to
Alternatively, press PMODE button on your remote to enter Picture Mode.
You can adjust the Picture Mode to Standard, Dynamic, Mild, User.
You can adjust Contrast, Brightness, Colour, Sharpness from User Mode
Use the
buttons to select your desired option, then press
buttons to adjust.
Contrast
Colour
Adjusts the highlight intensity of the picture, however, shadows of the picture is unaffected.
Adjusts colour saturation of the picture.
Sharpness
Brightness
Adjusts the optical fibre output of the entire picture, affecting dark areas of the picture.
Adjust the peaking in the detail of the picture.
22
Picture Menu
Colour Temperature
You can adjust the overall colour hue of the television’s picture from Colour Temperature.
From the Picture Menu, use the
buttons to select Color Temperature then press the ENTER button
to enter the Colour Temp sub-menu.
From the Color Temperature sub-menu, use the use the
and Warm and press ENTER.
buttons to choose between Cold, Normal
To adjust the value of Cold, Normal, and Warm, use the buttons, then press MENU to save your
changes.
Cold
Increases blue tones
Normal Balances blue and red tones
Warm
Increases red tones
Aspect Ratio
The Aspect Ratio is the proportion between the height and width of a picture.
From the Picture Menu, use the
buttons to select Aspect Ratio then press the ENTER button to
enter the Aspect Ratio sub-menu. Use the
buttons to select between Auto, 4:3, 16:9, Zoom1 and
Zoom2.
Noise Reduction
This is used to reduce image noise and soften images on the television to improve picture quality.
From the Picture Menu, use the
buttons to select Noise Reduction then press the ENTER
button to enter the Noise Reduction sub-menu. Use the
buttons to select between:
Off
No noise reduction
Low
Detect and reduce some image noise
Middle Detect and reduce moderate image
noise
High
Detect and reduce enhanced image
noise
Dynamic Compression Ratio (Dynamic CR)
Set to OFF (default).
23
Sound Menu
Press MENU button to display the Main Menu.
buttons select Sound, then press ENTER or
Use the
to enter.
1.
Press
buttons to select the option that you want to adjust in the Sound Menu.
2.
Press ENTER button to adjust.
3.
Press MENU button to save your adjustments and return to the previous menu.
Sound Mode
From the Sound Menu, use the
buttons to select Sound Mode then press the ENTER button to
enter the Sound Mode sub-menu, or press SMODE on your remote control. Use the
buttons to
select between:
Standard
Produces a balanced sound in most environments
Music
Preserves original sound
Movie
Enhances treble and base for a rich sound experience
Sport
Enhances vocals - ideal for sports programmes
User
Select to customise your Sound Settings.
NOTE: Adjustments to specific frequencies is only available from User Mode.
24
Sound Menu
Balance
This allows you to adjust your speaker’s output for optimal sound based on your position in
the room.
From the Sound Menu, use the
Balance sub-menu.
Use the
buttons to select Balance then press the ENTER button to enter the
buttons to adjust.
Auto Volume Level
This reduces the difference in volume between the channel and the programme automatically.
From the Sound Menu, use the
buttons to select Auto Volume Level then press the ENTER button to
enter the Auto Volume Level sub-menu.
Use the
buttons to turn Auto Volume ON or OFF.
Surround Sound
This helps create an effect where the sounds surrounds the viewer.
From the Sound Menu, use the
buttons to select Surround Sound then press the ENTER button
to enter the Surround Sound Level sub-menu.
Use the
buttons to turn Surround Sound ON or OFF.
SPDIF Mode
From the Sound Menu, use the
the SPDIF Mode sub-menu.
Use the
buttons to select SPDIF Mode then press the ENTER button to enter
buttons to select between PCM / AUTO.
Audio Description (AD) Switch
Certain broadcast programmes have Audio Descriptions available.
The AD (Audio Description) describes the sounds of the scenes which are being played on the
television eg. explosion, people walking, jazz music playing etc.
From the Sound Menu, use the
the AD Switch sub-menu.
Use the
buttons to select AD Switch then press the ENTER button to enter
buttons to turn Audio Descriptions ON or OFF.
If a broadcasted programme has Audio Descriptions available, audio descriptions will be displayed on
screen.
25
Time Menu
Press MENU button to display the Main Menu. Use the
ENTER or
buttons select Time, then press
to enter.
1.
Press
2.
Press ENTER button to adjust.
buttons to select the option that you want to adjust in the Time Menu.
3.
Press MENU button to save your adjustments and return to the previous menu.
Clock
This allows you to set the time on your television.
From the Time Menu, use the
Clock sub-menu. Use the
buttons to select Clock then press the ENTER button to enter the
buttons to set the correct date, month, year and time.
Off Time
This allows you to set a time to automatically turn your
television OFF.
From the Time Menu, use the
buttons to select Off
Time then press the ENTER button to enter the Off Time
sub-menu.
Use the
buttons to set the date, month, year
and time you want to set the television to automatically
turn OFF.
26
Time Menu
On Time
This allows you to set a time to automatically turn
your television ON.
From the Time Menu, use the
buttons to select
On Time then press the ENTER button to enter the
On Time sub-menu.
Use the
buttons to set the date, month, year
and time you want to set the television to
automatically turn OFF.
Sleep Timer
This allows you to set a timer to automatically turn your television to Sleep Mode.
From the Time Menu, use the
the Sleep Timer sub-menu.
buttons to select Sleep Timer then press the ENTER button to enter
Select from Off, 15 min - 240 mins. Then, the timer will start.
Auto Standby
This allows you to set a timer to automatically set your television to standby.
From the Time Menu, use the
buttons to select Auto Standby then press the ENTER button to enter
the Auto Standby sub-menu and select from the timer options.
Auto Standby and Sleep Timer - Differences
If you set your television to Auto Standby and use the remote control, the timer starts again. If you
do not use your remote control after you have set your television to Auto Standby, your television will
switch to Standby Mode.
If you want to use your remote control but want your television to switch to sleep within your
selected time, use the Sleep Timer function instead.
27
Time Menu
Time Zone
This allows you to set the time zone on your television.
From the Time Menu, use the
Time Zone sub-menu.
Use the
buttons to select Time Zone then press the ENTER button to enter the
buttons to set the correct time zone, then press ENTER.
OSD Timer (On Screen Display Menu)
This allows you to set how long your On Screen Display Menu (OSD) is active before it switches off and
returns to the programme you’re currently watching.
From the Time Menu, use the
the OSD Timer sub-menu.
buttons to select OSD Timer then press the ENTER button to enter
Use the
buttons to select be the timer options: 5 seconds, 15 seconds, 20 seconds, 25 seconds, 30
seconds, Off.
28
Option Menu
Press MENU button to display the Main Menu.
Use the
buttons select Option, then press ENTER or
to enter.
1.
Press
buttons to select the option that you want to adjust in the Option Menu.
2.
Press ENTER button to adjust.
3.
Press MENU button to save your adjustments and return to the previous menu.
On Screen Display (OSD) Language
This allows you set the language displayed in your On Screen Display (OSD).
From the Option Menu, use the
buttons to select OSD Language then press
the ENTER button to enter the Language
sub-menu.
Use the
buttons to select your
desired language, then press ENTER to set.
29
Option Menu
Audio Languages
Certain broadcast programmes have different audio languages available.
From the Option Menu, use the
buttons to select Audio Languages then press the ENTER button to enter the Audio Languages sub-menu.
Use the
buttons to select your desired language, then press ENTER to set.
Subtitle Language
Certain broadcast programmes have subtitles available in different languages. This allows you to set
the language of the subtitles, if available.
From the Option Menu, use the
buttons to select Subtitle Language then press the ENTER button to enter the Subtitle Language sub-menu.
Use the
buttons to select your desired language, then press ENTER to set.
Hearing Impaired
Certain programmes broadcasted have subtitles available for those who are hearing impaired.
To turn this function on, from the Option Menu, use the
buttons to select Hearing Impaired
then press the ENTER button to enter the Hearing Impaired sub-menu.
Use the
buttons to turn ON or OFF.
Subtitles will display if a broadcasted programme has this feature available.
Personal Video Recording (PVR) File System
The PVR File System allows you to use a check and format a USB hard drive that is plugged into your
television. To record a television programme, you must have USB storage device connected to the
television as the television set has no built-in memory.
From the Option Menu, use the
buttons
to select PVR File System then press the ENTER
button to enter the PVR File System sub-menu.
Scroll down to Check PVR File System and
press ENTER.
30
Option Menu
This dialogue box will appear, showing the details of the
USB hard drive, particularly the size (how many minutes
of recording time) the USB hard drive has.
Standard Definition (SD)
The recordable time available if you are recording an SD
television programme.
High Definition (HD)
The recordable time available if you are recording an HD
television programme.
Formatting a USB Storage Device
If you are having problems recording, check that there is sufficient memory left on the USB storage device.
If required, format the USB storage device by:
1.
Save any data currently stored on your USB
storage device onto another storage device,
as any data will be deleted during formatting.
2.
Press MENU and scroll across to the
Option Menu and press ENTER.
3.
Once in the Option Menu, scroll down to PVR
File System and press ENTER.
4.
Once in the PVR File System sub-menu, scroll
down to Format and press ENTER.
5.
The following dialogue box will appear:
Press the button to start formatting the USB
hard drive.
6.
The following progress box will appear:
31
Option Menu
7.
Once formatting is completed, the dialogue
box will return to the following menu, and
the USB hard drive is ready to use.
Reset
This allows you to reset all the setting in the Option Menu back to factory default.
From the Option Menu, use the
Reset sub-menu.
buttons to select Reset then press the ENTER button to enter the
HDMI CEC
HDMI CEC (Consumer Electronics Control) is a feature of HDMI that allows you to control devices
connected to the HDMI ARC port with your television remote control.
Please note that this function is only available with devices that have HDMI CEC capability.
From the Option Menu, use the
the HDMI CEC sub-menu.
buttons to select HDMI CEC then press the ENTER button to enter
32
Option Menu
HDMI CEC
Use the buttons to turn HDMI CEC ON or OFF.
HDMI ARC
Use the buttons to turn HDMI ARC ON or OFF.
Auto Standby
This allows you to set your television to
Standby when an HDMI CEC capable
device goes to Standby mode.
Use the buttons to turn Auto TV
Power ON or OFF.
Auto TV On
This allows you to turn your television ON
when an HDMI CEC capable device is
turned ON.
Use the buttons to turn Auto TV
Power ON or OFF.
Device Control
This allows you to use the television
remote control to control other HDMI CEC
capable devices.
Device List
Press the ENTER button to enter
the Device List sub-menu to see the
number of devices connected to your
television via HDMI.
33
Option Menu
First Time Installation
This allows you to set the On Screen Display (OSD) language, the country, and allows you to tune your
television.
From the Option Menu, use the
buttons to
select First Time Installation then press the
ENTER button to enter the First Time
Installation sub-menu.
Use the
to make your adjustments,
then press ENTER on your remote to confirm
your settings.
ECO Mode
This allows you to set your television to change the light output level of the television screen.
From the Option Menu, use the
between Low, Middle, High.
buttons to select ECO Mode then use the
buttons to select
Store Mode
For store use only.
Blue Screen
When there is no signal available, this allows you to set the screen to blue instead of the white noise
screen. From the Option Menu, use the
buttons to select Blue Screen then use the
buttons to select ON or OFF.
34
Lock Menu
Press MENU button to display the Main Menu.
Use the
buttons select Lock, then press ENTER or
to enter.
1.
Press
2.
Press ENTER and/or
buttons to select the option that you want to adjust in the Lock Menu.
3.
Press MENU button to save your adjustments and return to the previous menu.
buttons to adjust.
Lock System
This allows you to lock/unlock from making changes in the Lock Menu.
From the Lock Menu, use the
the Lock Menu.
buttons to select System Lock then press the ENTER button to enter
Enter the password to unlock the Lock Menu, then press ENTER.
Default password is 0000.
35
Lock Menu
Set Password
buttons to select Set Password then press ENTER.
Use the
Enter the password (default password is 0000) then press
ENTER.
Enter new password, and confirm new password, then press
ENTER to set new password.
Master Password
If you forget the password you have set, use
the master code 4711
Block Program
This allows you to lock/unlock access to channels on your television.
From the Lock Menu, use the
buttons to select Block Program then press the ENTER button to
enter the Block Program sub-menu.
Use the
Press the
36
buttons to select the channel you want to lock.
button on your remote to lock the channel.
Lock Menu
Parental Guidance
This allows you to lock/unlock access to broadcast programmes which have a specific age rating, if
available. Please note that not all broadcast programmes have age ratings available, and these
programmes will be available to view by default.
From the Lock Menu, use the
buttons to select Parental Guidance then use the
buttons
to set the age rating you want to be available to view on your television eg. 12 will allow all television
programmes with a rating of 12 and under to be viewable on your television.
Key Lock
This allows you to lock/unlock the buttons on the back of your television.
From the Lock Menu, use the
Lock Menu.
Use the
buttons to select Key Lock then press the ENTER button to enter the
buttons to select ON or OFF. To turn Key Lock off, enter your password.
37
Hotel Mode
This allows you to control the settings that are on your television. In order to change settings of Hotel
Mode, the System Lock must be set to ON. See Page 35.
Hotel Mode Setting
This switches Hotel Mode ON or OFF. From the Lock Menu, use the
select Hotel Mode Setting. Use the
buttons to select ON or OFF.
buttons to scroll down and
Source Lock
This allows you to lock/unlock the available Input Source available on the television.
From the Lock Menu, use the
buttons to select Hotel Mode then press the ENTER button to enter
the Hotel Mode sub-menu. Use the
buttons to scroll down and select Source Lock then press the
ENTER button to enter the Input Block sub-menu.
Use the
buttons to scroll
through the Source options.
Use the
buttons to Lock/Unlock
(ON/OFF) the Input Source Options.
38
Hotel Mode
Default Source
This allows you to set which Source Input will be the default for the television when the television is
turned on.
From the Lock Menu, use the
buttons to select Hotel Mode then press the ENTER button to enter
the Hotel Mode sub-menu. Use the
buttons to scroll down and select Default Source then use
the
buttons to scroll through the Source options to select the default source.
DTV Type
Set to DTV (digital television).
Default Prog
This allows you to set which television channel will appear when the television is switched on.
From the Lock Menu, use the
buttons to select Hotel Mode then press the ENTER button to enter
the Hotel Mode sub-menu. Use the
buttons to scroll down and select Default Prog then
use the
buttons to scroll through the channels to select the default channel.
Max Volume
This allows you to set the maximum volume level on the television.
From the Lock Menu, use the
buttons to select Hotel Mode then press the ENTER button to enter
the Hotel Mode sub-menu. Use the
buttons to scroll down and select Max Volume then use
the
buttons to select the maximum volume level.
Default Volume
This allows you to set the default volume level when the television is switched on.
From the Lock Menu, use the
buttons to select Hotel Mode then press the ENTER button to
enter the Hotel Mode sub-menu. Use the
buttons to scroll down and select Default Volume then
use the
buttons to select the default volume level.
Clear Lock
This allows you to reset all the settings in Hotel Mode.
From the Lock Menu, use the
buttons to select Hotel Mode then press the ENTER button to
enter the Hotel Mode sub-menu. Use the
buttons to scroll down and select Clear Lock then press
the ENTER to reset the settings in Hotel Mode.
39
Media Player Operation
Media
Before operating the Media Menu, insert your USB hard drive in to the side of your television.
Press the SOURCE button on your remote control and use the
press ENTER to enter the Media Player menu.
buttons to select Media Player then
Media - Sub Menu
Use the
arrows to select Photo, Music, Movie or Text and press the ENTER button.
Use the
buttons to select C drive, and press ENTER.
40
Media Player Operation
Use the
buttons to select the file you want to work with and press ENTER to select - a preview of
the file will appear to the right of the screen
To view the photo, movie, or music file, press the
or the
button.
The Sub Menu options will appear on the bottom of the screen - Copy, Delete any file media file on the
USB drive, as well as format the USB drive from the Media Menu.
Copy
To copy a file, select the file you want to copy by using the
will appear next to your selected file. Press the
YELLOW
buttons and press ENTER. A red tick
button. A confirmation pop up will appear. Select
Start to begin copying the file.
After the file has been copied, the Sub Menu options will now show a Paste option - press the
button to paste the copied file.
41
Media Player Operation
Delete
To delete a file, select the file you want to delete by using the
tick will appear next to your selected file. Press the
buttons and press ENTER. A red
button to delete the file.
A confirmation pop up will appear. Select Start Yes to delete the file.
42
Media Player Operation
Photo Menu
This allows you to view image files from your USB device on your television.
From the Media Player Menu, use the
buttons to select Photo then press the ENTER button. Use the
buttons to select C drive, and press ENTER.
Use the
buttons to select the image file in the Photo sub-menu you want to view, then press ENTER
to select the image. A preview of the image will be shown in the centre off the screen.
Press the
or the
button to make the image full screen.
Press the
buttons and a range of functions such as Rotate, Zoom in, Zoom Out etc. will be
displayed on-screen. Use the
buttons to scroll through the on-screen options.
43
Media Player Operation
Music Menu
This allows you to play music files from your USB device on your television.
From the Media Player Menu, use the
buttons to select Music then press the ENTER button. Use
the
buttons to select C drive, and press ENTER.
Use the
buttons to select the music file in the Music menu you want to listen to, then press ENTER
to select the music file. A preview of the music file will be shown in the centre off the screen.
Press the
or the
button to play the selected music file.
Press the
button and a range of functions such as Fast Forward, Rewind etc. will be displayed
on-screen. Use the
buttons to scroll through the on-screen options.
44
Media Player Operation
Movie Menu
This allows you to watch movie files from your USB device on your television.
From the Media Player Menu, use the
buttons to select Movie then press the ENTER. Use the
buttons to select C drive, and press ENTER.
Use the
buttons to select the file in the Movie sub-menu you want to view, then press ENTER to
select the movie file. A preview of the movie file will be shown to the right of the screen.
Press the
or the
button to make to play the selected movie file.
Press the
button and a range of functions such as Stop, Play, Pause etc. will be displayed
on-screen. Use the
buttons to scroll through the on-screen options.
45
Media Player Operation
Text Menu
This allows you to view text files (.txt) on your television.
From the Media Player Menu, use the
buttons to select Text then press the ENTER button. Use the
buttons to select C drive, and press ENTER.
Use the
buttons to select the file in the Text sub-menu you want to view, then press ENTER to select
the text file. A preview of the text file will be shown to the right of the screen.
Press the
Press the
or the
button to make the image full screen.
buttons and a range of functions such as Previous, Next, Next Page etc. will be displayed
on-screen. Use the
buttons to scroll through the on-screen options.
46
Electronic Programme Guide (EPG)
Press the EPG button to display the Electronic Programme Guide (EPG).
Recording a Programme - Scheduled
To set a programme to be recorded in the future, connect a USB hard drive to the USB port at the back
of your television.
Press the EPG button, and press the
button and use the
to set the channel,
start time and date, and end time and date.
47
Electronic Programme Guide (EPG)
Info
Press the
button, and the programme information and synopsis will be displayed.
Remind
This allows you to be reminded of that a programme is about to start being broadcasted. Please note
that this is only a reminder, and will not record the programme.
From the EPG, use the
to select the programme you wanted to be reminded of and then press
the
button. The following pop up box will be displayed:
The pop up will import the time and date details of the
programme you want to be reminded of.
If you want to manually adjust the time date settings,
use the
buttons to set your reminder, and
then press ENTER to set.
This reminder will be added to your Schedule List.
48
USB Record Function
Recording a Programme - Current
To record a programme that is currently being played, connect an USB hard drive to the port on the
back of your television. Press the REC button on your remote control.
The programme will start recording and on-screen functions will appear on the bottom of the screen.
Use the
buttons to switch between Play and Stop. While you are recording a programme, only
Play and Stop will be available.
A red circle with a white triangle in the middle
the programme is being recorded.
will appear on the top left corner, indicating that
To stop recording, press the REC button and the on-screen functions will appear again on the
bottom. Scroll using the
buttons and select Stop.
The following pop up will appear, confirming to
stop the Personal Video Recording (PVR).
Press the
button to stop the recording.
If you experience any difficulty recording onto
your USB hard drive, follow the USB format
instructions on Page 31.
49
USB Record Function
Playing a Recorded Programme
To view your recorded programme, press
REC LIST, and the following pop up box will appear.
Scroll down to the recording you want to view, and press
ENTER to play.
A white triangle
will appear on the top left corner, indicating that the programme being played
on-screen is a recording.
All the on-screen functions will now be available to use while playing a recorded programme. Press
the REC button and the on-screen functions will appear again on the screen and use the
to scroll
through the functions and press ENTER to activate that function.
50
USB Record Function
Timeshift
Timeshift allows you to pause a broadcasted television program. Timeshift also allows you to resume
watching the program from where it was paused. You need to have a USB hard drive inserted in the
USB port in your television, as your television will essentially start recording the live broadcast programme from where you paused the programme.
Pause a Television Program
Press the TIMESHIFT button on your remote control to pause the television program. A white pause symbol will appear on the top left hand side of the screen to indicate that the programme has been paused.
To resume watching, press the TIMESHIFT button again. The television will resume playing from where you
have paused the program (playing what it has recorded in that time). A white triangle with a red S in the
middle will appear on the top left hand side of the screen to indicate that the programme playing is from the
Timeshift function, and not live broadcast.
s
Disk not ready - If you press the TIMESHIFT button and a pop up box appears with “Disk not ready”, ensure
that you have a USB hard drive inserted, or your USB storage device may need to be formatted - see Page 31
for details.
51
DVD Player
Playing a DVD
This television has a built-in DVD player. To play a DVD disc, insert the disc into the disc slot on the side
of the television, paying close attention to the labels indicating which side the mirror side of the DVD
should be facing.
The DVD should automatically begin playing. Use the
menus on the DVD.
buttons to navigate the on-screen
DVD Buttons on Remote Control
Press to eject a DVD.
Press to Play/Pause a DVD.
Press to Stop a DVD.
Press to rewind while playing a DVD.
Press to fast forward while playing a DVD.
Press to return to previous chapter in the DVD.
Press to skip to the next chapter in the DVD.
D. setup Press enter the DVD setup menu.
D. Menu Press to show the DVD’s menu.
D. Title
If the DVD has several films on it, pressing D.Title takes you to the menu showing the films on the DVD
(DVD dependent)
Goto
Enables you to jump to another chapter without
leaving the film. Press GOTO button and enter the chapter
you want to go to using the number buttons.
D.Disp
Press to show the DVD information eg. chapter currently being
watched, time elapsed etc.
D.setup
Press to display the DVD Setup Menu.
52
DVD Player
DVD Setup Menu
This allows you to edit some features in DVD mode. Please note that when features overlap with features
available to edit in the main television menus eg. Video Sharpness, Brightness etc, the television menu
settings will override any changes made to the features in DVD mode.
Press the D.setup button on your remote control to enter the DVD Setup Menu and use the
to navigate the on screen menus. Press the
button to return to the previous menu.
Press the EXIT button to exit out of the DVD Setup Menu.
53
buttons
USB Multimedia Playback Format
Codec
File
Media
Ext.
.mpg
Remark
Video
Audio
Max Resolution: 1920 x 1080
MPEG-1, MPEG-2
Max Data Rate: 40 Mbps
DivX, Xvid, MJPEG
.avi
.ts
Movie
Music
.mov
MPEG-4, SP/ASP,
H.263 / H.264 /
H.265
MPEG-2, AVS, AVS+,
HEVC
.mkv
MPEG-4, SP / ASP,
H.263 / H.264, HEVC
.dat
MPEG-1
.mp4
MPEG-4, SP / ASP,
H.263 / H.264, HEVC
MP3, WMA,
AAC, AC3,
PCM
Max Resolution: 1920 X 1080
Max Data Rate: 20 Mbps
MPEG-1, MPEG-2
Max Resolution: 720 x 576
.vob
MPEG-2
Max Data Rate: 40 Mbps
.rm/rmvb
RV30 / RV40
COOK, MP2
Max Resolution: 1920 X 1080
.mp3
-
MP3
Sample Rate: 8K~48KHz
Bit Rate: 32K~320Kbps
.wma
-
WMA
Channel: Mono / Stereo
-
AAC
Sample Rate: 16K~48KHz
Bit Rate: 16K~48Kbps
Channel: Mono / Stereo
.m4a/
.aac
.jpg
Progressive JPEG
.jpeg
Baseline JPEG
.bmp
BMP
Max Resolution: 1024 x 768
Max Resolution: 15360 x 8640
Max Resolution: 9600 x 6400
Photo
.png
Pixel Depth:
1/4/8/16/24/32bpp
Non-Interlaced
Max Resolution: 9600 x 6400
Interlaced
Max Resolution: 1280 x 800
File System: FAT32, FAT16, NTFS
Audio and video coding format in above table.
54
Troubleshooting
No power
Check if the AC-DC power adaptor is connected to the television unit
and switched on at the socket outlet. If the television still does not
operate, check the socket outlet has power by trying another
appliance in the socket.
Cannot receive signal
properly
Double or Phantom Imaging may occur in high buildings or when
surrounded by mountains. If this scenario occurs, please;
•
consult television provider; or
•
manually change the direction of external antenna
If you are using an indoor antenna, receiving a signal will be more
difficult. Adjust the antenna until desired picture appears. If image
does not change, an external antenna must be used.
No picture
Check the antenna at the back of the television is connected
properly. Try to select other channels to check whether it is the television or just the channel itself which has problems. Ensure the television
is tuned correctly (follow instructions under Channel Menu on Pages
17 - 21).
Video is working, but no
audio
Try increasing the volume on your remote control. Check that Mute
function on your remote has not been selected.
Press Mute button mute / unmute sound.
Television is not
responding to the
remote.
Operate the remote directly facing the sensor on the front of the television. Check that the batteries’ polarity are installed correctly. Try using
a new set of batteries. The television will return to Standby mode if
there has been no response from the remote.
No video in (PC Mode)
Please check if the display cable connected to the VGA is inserted correctly, and check that the cable is free from bends and not
damaged.
Lost password
Master Password: 4711
Use the master password to unlock the television if the password is
lost.
55
Technical Specifications
Model
L20PTC17a
Display Screen Type
Edge LED lit, LCD Display
Screen Size
49cm (19.4”)
Viewing Angle
178° (Horizontal) / 178° (Vertical)
Aspect Ratio
16:9
Resolution
High Definition: 1366 (h) x 768 (v)
Power Requirement
TV System
Frequency Range
AC 100 - 240V~, 50-60Hz for power adaptor
DC12V for television unit
PAL / SECAM: BG, DK, I & DVB-T
Analogue: 48.25 Mhz - 863.25 Mhz
Digital: VHF (174MHz - 230MHz) UHF (474MHz - 862MHz)
Video In System
PAL / SECAM
Preset Channels
ATV: 200 / DVB-T: 500
Antenna Input Impedance
75Ω
Speaker Output
2 x 5W
Inputs
HDMI x 2, AV Composite, VGA (D-sub), YPbPr, PC Audio, USB
Outputs
Headphone, Coaxial Audio
Power Consumption
36W
Power Supply - Remote Control
DC 3V (2 x AAA size batteries)
Dimensions ( L x W x H )
Net Weight
Wall Mounting
Television With Stand:
Television Without Stand: 462 x 51 x 272mm
Television With Stand:
2.5 kg
Television Without Stand: 2.3 kg
VESA Wall Mount Pattern: 100 x 100mm
Specifications
Operating Environment
462 x 140 x 305mm
0 - 40 degrees Celsius
56
Note: The LCD panel is a high technology product, giving you finely detailed images. Occasionally,
a few non-active pixels may appear on the screen as a fixed point of colour. This does not affect the
performance of your product.
This Instruction Manual is for reference only. Specifications are subject to change without notice.
57
Distributed by:
M.E.W. (Australia) Pty Ltd,
15 Vaughan St, Essendon Fields, VIC 3041
ACN 152 719 036
Customer care: Aus-1300 530 800
customercare@lindenproducts.com.au
lindenproducts.com.au
While every effort has been made in the preparation of this instruction manual, the publishers
cannot be held responsible for the accuracy of the information contained herein or any
consequences arising from it.
Download PDF
Similar pages