QuickSpecs
HPE OfficeConnect 1920 Switch Series
Overview
HPE OfficeConnect 1920 Switch Series
Models
HPE OfficeConnect 1920 8G Switch
HPE OfficeConnect 1920 8G PoE+ (65W) Switch
HPE OfficeConnect 1920 8G PoE+ (180W) Switch
HPE OfficeConnect 1920 16G Switch
HPE OfficeConnect 1920 24G Switch
HPE OfficeConnect 1920 24G PoE+ (180W) Switch
HPE OfficeConnect 1920 24G PoE+ (370W) Switch
HPE OfficeConnect 1920 48G Switch
HPE OfficeConnect 1920 48G PoE+ (370W) Switch
JG920A
JG921A
JG922A
JG923A
JG924A
JG925A
JG926A
JG927A
JG928A
Key features
•
•
•
•
•
Customized operation using intuitive Web interface
Layer 3 static routing with 32 routes for network segmentation and expansion
Access control lists for granular security control
Spanning Tree Protocol : STP, RSTP, and MSTP
Limited Lifetime warranty
Product overview
The HPE OfficeConnect 1920 Switch Series consists of advanced smart-managed fixed-configuration Gigabit switches designed
Page 1
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Overview
for small businesses in an easy-to-administer solution. By utilizing the latest design in silicon technology, this series is one of the
most power efficient in the market.
The series has 9 switches: four non-PoE models and five PoE+ models. All models are equipped with additional Gigabit SFP ports
for fiber connectivity. The 8-, 24- and 48-port PoE+ models are available with PoE or without PoE.
The series is part of the OfficeConnect portfolio of Hewlett Packard Enterprise small business networking products. These switches
provide a great value, and includes features to satisfy even the most advanced small business networks. All models support rack
mounting or desktop operation. Customizable features include basic Layer 2 features like VLANs and link aggregation, as well as
advanced features such as Layer 3 static routing, IPv6, ACLs, and Spanning Tree Protocols. HPE OfficeConnect 1920 Switch Series
includes a Limited Lifetime Warranty. This warranty provides advance hardware replacement with next business day shipment in
most countries, limited 24x7 telephone support available from HPE for the first 90 days, and limited electronic and business hours
telephone support is available from HPE for the entire warranty period.
Features and benefits
Management
•
•
•
•
•
•
•
•
•
•
•
•
Simple Web management
allows for easy management of the switch—even by nontechnical users—through an intuitive Web GUI; supports HTTP
and HTTP Secure (HTTPS)
Single IP management
enables management of up to 32 HPE OfficeConnect 1920 switches using a single Web interface; simplifies management
of multiple devices
SNMPv1, v2c, and v3
facilitates management of the switch, as the device can be discovered and monitored from an SNMP management station
Management Security
restricts access to critical configuration commands; offers multiple privilege levels with password protection; ACLs provide
Telnet and SNMP access; local and remote syslog capabilities allow logging of all access
Complete session logging
provides detailed information for problem identification and resolution
Port mirroring
enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
Dual flash images
provides independent primary and secondary operating system files for backup while upgrading
Network Time Protocol (NTP)
synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent among all clockdependent devices within the network so that the devices can provide diverse applications based on the consistent time
Limited CLI
enables users to quickly deploy and troubleshoot devices in the network
Default DHCP client mode
allows the switch to be directly connected to a network, enabling plug-and-play operation; in absence of a DHCP server on
the network, the switch will fall back to a unique static address determined by the switch's MAC address
FTP, TFTP, and SFTP support
offers different mechanisms for configuration updates; FTP allows bidirectional transfers over a TCP/IP network; trivial
FTP (TFTP) is a simpler method using User Datagram Protocol (UDP); Secure File Transfer Protocol (SFTP) runs over an
SSH tunnel to provide additional security
Remote monitoring (RMON)
uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a
private alarm extension group
Quality of Service (QoS)
•
Traffic prioritization
provides time-sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p
Page 2
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Overview
•
•
•
•
•
•
classification; packets are mapped to eight hardware queues for more effective throughput
IEEE 802.1p/Q
delivers data to devices based on the priority and type of traffic; supports IEEE 802.1Q
Class of Service (CoS)
sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number,
source port, and DiffServ
Broadcast control
allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Advanced Classifier based QoS
classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting
priority level and rate limit to selected traffic on a per-port basis
Rate limiting
sets per-port ingress enforced maximums and per-port, per-queue minimums
Powerful QoS feature
supports the following congestion actions: strict priority queuing (SP), weighted round robin (WRR) queuing, and
SP+WRR
Connectivity
•
•
•
•
•
•
IPv6
o
IPv6 host
enables switches to be managed and deployed at the IPv6 network's edge
o IPv6 routing
supports IPv6 static routes
o MLD snooping
forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding
o IPv6 ACL/QoS
supports ACL and QoS for IPv6 network traffic
IEEE 802.3X flow control
provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node
IEEE 802.3at Power over Ethernet (PoE+)
provides upto 30W per port, which allows support of the latest PoE+-capable devices such as IP phones, wireless access
points, and security cameras, as well as any IEEE 802.3af-compliant end device; lowers the cost of additional electrical
cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments.
Cable diagnostics
detects cable issues remotely using a browser-based tool
Flow control
provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations
Auto MDI/MDI-X
adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports
Security
•
•
•
•
Advanced access control lists (ACLs)
enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for
greater flexibility with managing network access
IEEE 802.1X and RADIUS network logins
controls port-based access for authentication and accountability
Secure Socket Layer (SSL)
encrypts all HTTP traffic, allowing safe access to the browser-based management GUI in the switch
Port Isolation
The port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also
be used to isolate the hosts in a VLAN from one another.
Page 3
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Overview
•
•
•
•
•
•
•
Port Security
Combines and extends IEEE 802.1X and MAC authentication to provide MAC-based network access control
ARP attack protection
The ARP detection feature enables access devices to block ARP packets from unauthorized clients to prevent user
spoofing and gateway spoofing attacks.
Automatic VLAN assignment
assigns users automatically to the appropriate VLAN based on their identity, location and time of day
STP BPDU port protection
blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
STP root guard
protects the root bridge from malicious attacks or configuration mistakes
Automatic denial-of-service protection
monitors for malicious attacks and protects the network by blocking the attacks
Management password
provides security so that only authorized access to the Web browser interface is allowed
Performance
•
•
•
•
Half- and full-duplex auto-negotiating capability on every port
doubles the throughput on every port
Selectable queue configurations
allows for increased performance by selecting the number of queues and associated memory buffering that best meet the
requirements of the network applications
IGMP snooping
improves network performance through multicast filtering, instead of flooding traffic to all ports
Fiber uplink
provides greater distance connectivity using Gigabit Ethernet fiber uplinks
Layer 2 switching
•
•
•
•
Spanning Tree Protocol (STP)
supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
BPDU filtering
drops BPDU packets when STP is enabled globally but disabled on a specific port
Jumbo frame support
supports up to 10 kilobyte frame size to improve the performance of large data transfers
VLAN support and tagging
supports IEEE 802.1Q with 4,094 simultaneous VLAN IDs
Layer 3 services
•
•
Address Resolution Protocol (ARP)
determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection
of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a
Layer 2 network
DHCP relay
simplifies management of DHCP addresses in networks with multiple subnets
Layer 3 routing
•
Static IPv4/IPv6 routing
Page 4
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Overview
provides basic routing (supporting up to 32 static routes and 8 virtual VLAN interfaces); allows manual routing
configuration
Resiliency and high availability
•
•
Available redundant power supply
provides additional PoE of up to 795W for high-power applications like PTZ IP cameras, Video IP phones; the HPE
RPS1600 Redundant Power System (JG136A), which is sold separately, is for use with the HPE OfficeConnect 192024G-PoE+ (180W) switch and HPE OfficeConnect 1920-24G-PoE+(370W) switch models
Link aggregation
groups together multiple ports up to a maximum of eight ports per trunk either automatically using Link Aggregation
Control Protocol (LACP), or manually, to form an ultra-high-bandwidth connection to the network backbone; help prevent
traffic bottlenecks. The 8 port models support 4 trunks, 16 and 24 port models support 8 trunks, 48 port models support
16 trunks.
Convergence
•
•
•
LLDP-MED (Media Endpoint Discovery)
defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure
network devices such as IP phones
PoE allocations
supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for more
efficient energy savings
Auto voice VLAN
recognizes IP phones and automatically assigns voice traffic to dedicated VLAN for IP phones
Additional information
•
•
•
Green initiative support
provides support for RoHS and WEEE regulations
Green IT and power
improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and
utilizes variable-speed fans, reducing energy costs
Energy Efficient Ethernet
Compliant with IEEE 802.3az standard requirements to save energy during periods of low data activity.
Warranty and support
•
Limited Lifetime Warranty
This series comes with a Limited Lifetime Warranty providing advance hardware replacement with next business day
shipment in most countries, 24x7 phone support available for the first 90 days, and electronic and business hours phone
support for the entire warranty period. See http://www.hpe.com/networking/warrantysummary for full warranty and
support information included with your product purchase.
Page 5
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Configuration
Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or RackShippable solution.
HPE OfficeConnect 1920 8G Switch
• 8 RJ-45 auto-negotiating 10/100/1000 ports
• 2 SFP 1000 Mbps ports
• min=0 \ max=2 SFP Transceivers
• 1U - Height
JG920A
See Configuration
NOTE:1, 2
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JG920A #B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JG920A #B2C
HPE OfficeConnect 1920 8G PoE+ (65W) Switch
• 8 RJ-45 auto-negotiating 10/100/1000 PoE+ ports
• 2 SFP 1000 Mbps ports
• min=0 \ max=2 SFP Transceivers
• 1U - Height
JG921A
See Configuration
NOTE:1, 2
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JG921A #B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JG921A #B2C
HPE OfficeConnect 1920 8G PoE+ (180W) Switch
• 8 RJ-45 auto-negotiating 10/100/1000 PoE+ ports
• 2 SFP 1000 Mbps ports
• min=0 \ max=2 SFP Transceivers
• 1U - Height
JG922A
See Configuration
NOTE:1, 2
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JG922A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JG922A#B2C
HPE OfficeConnect 1920 16G Switch
• 16 RJ-45 auto-negotiating 10/100/1000 ports
• 4 SFP 1000 Mbps ports
• min=0 \ max=4 SFP Transceivers
• 1U - Height
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JG923A
See Configuration
NOTE:1, 2
JG923A#B2B
Page 6
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Configuration
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
HPE OfficeConnect 1920 24G Switch
• 24 RJ-45 auto-negotiating 10/100/1000 ports
• 4 SFP 1000 Mbps ports
• min=0 \ max=4 SFP Transceivers
• 1U - Height
JG923A#B2C
JG924A
See Configuration
NOTE:1, 2
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JG924A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JG924A#B2C
HPE OfficeConnect 1920 24G PoE+ (180W) Switch
• 24 RJ-45 auto-negotiating 10/100/1000 PoE+ ports
• 4 SFP 1000 Mbps ports
• min=0 \ max=4 SFP Transceivers
• 1U - Height
JG925A
See Configuration
NOTE:1, 2
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JG925A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JG925A#B2C
HPE OfficeConnect 1920 24G PoE+ (370W) Switch
• 24 RJ-45 auto-negotiating 10/100/1000 PoE+ ports
• 4 SFP 1000 Mbps ports
• min=0 \ max=4 SFP Transceivers
• 1U - Height
JG926A
See Configuration
NOTE:1, 2
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JG926A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JG926A#B2C
HPE OfficeConnect 1920 48G Switch
• 48 RJ-45 auto-negotiating 10/100/1000 ports
• 4 SFP 1000 Mbps ports
• min=0 \ max=4 SFP Transceivers
• 1U - Height
JG927A
See Configuration
NOTE:1, 2
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JG927A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JG927A#B2C
Page 7
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Configuration
HPE OfficeConnect 1920 48G PoE+ (370W) Switch
• 48 RJ-45 auto-negotiating 10/100/1000 PoE+ ports
• 4 SFP 1000 Mbps ports
• min=0 \ max=4 SFP Transceivers
• 1U - Height
JG928A
See Configuration
NOTE:1, 2
PDU Cable NA/MX/TW/JP
• C15 PDU Jumper Cord (NA/MX/TW/JP)
JG928A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JG928A#B2C
Configuration Rules:
Note 1
The following Transceivers install into this switch:
HPE X121 1G SFP LC SX Transceiver
HPE X121 1G SFP LC LX Transceiver
HPE X121 1G SFP RJ45 T Transceiver
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
HPE X120 1G SFP RJ45 T Transceiver
J4858C
J4859C
J8177C
JD118B
JD119B
JD089B
Note 2
Localization (Wall Power Cord) required on orders without #B2B or #B2C (PDU Power Cord). (See
Localization Menu)
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan
or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box
Level CTO)
Transceivers
SFP Transceivers
HPE X121 1G SFP LC SX Transceiver
HPE X121 1G SFP LC LX Transceiver
HPE X121 1G SFP RJ45 T Transceiver
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
HPE X120 1G SFP RJ45 T Transceiver
J4858C
J4859C
J8177C
JD118B
JD119B
JD089B
Cables
Multi-Mode Cables
HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
Page 8
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Configuration
HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Switch Enclosure Options
External/Redundant Power Supplies
HPE RPS1600 Redundant Power System
• Height = 1U
• includes 1 x c13, 1600w and Power Supply port
JG136A
See Configuration
NOTE:2, 3, 4
HPE RPS1600 1600W AC Power Supply
• Installs into JG136A only
JG137A
See Configuration
NOTE:1, 3
Configuration Rules:
Note 1
If this power supply is selected, The JG136A - HPE RPS1600 Redundant Power System must be on
order or onsite.
Note 2
Localization required.
Note 3
Each switch will only support 1 JG136A and 1 JG137A Power supply systems.
Note 4
This power supply only supported on switch JG926A and JG928A.
External/Redundant Power Cables
HPE X290 1000 A JD5 2m RPS Cable
Remarks:
JD187A
See Configuration
NOTE:1
These cables are used to connect the External Power System to Switch.
Configuration Rules:
Note 1
This Cable is only supported on switch JG926A and JG928A when used with the RPS 1600 (JG136A)
Page 9
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Technical Specifications
HPE OfficeConnect 1920 8G Switch (JG920A)
8 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
2 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X
Supports a maximum of 8 autosensing 10/100/1000 ports plus 2 SFP 100/1000 slots
1 RJ-45 console port to access limited CLI port
Additional ports and
slots
10.47(w) x 6.38(d) x 1.73(h) in (26.6 x 16.2 x 4.4 cm) (1U height)
Physical characteristics Dimensions
1.98 lb (0.9 kg)
Weight
Memory and processor MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 512 KB
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included), Wall Mount
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
14.8 Mpps (64-byte packets)
Throughput
20 Gbps
Routing/Switching
capacity
32 entries (IPv4), 32 entries (IPv6)
Routing table size
MAC address table size 8192 entries
128.20
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
10% to 90%, noncondensing
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 10% to 95%, noncondensing
relative humidity
up to 16,404 ft (5 km)
Altitude
Pressure: 0 dB No Fan
Acoustic
50/60 Hz
Electrical characteristics Frequency
100 - 240 VAC
AC voltage
Maximum power rating 9 W
Maximum power rating and maximum heat dissipation are the worst-case
Notes
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Safety
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2
Emissions
2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager;
Management
IEEE 802.3 Ethernet MIB
SFP port and copper ports work simultaneously, independent of each other, to provide a total of 10
Notes
Gigabit switching ports.
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
Page 10
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Technical Specifications
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1920 8G PoE+ (65W) Switch (JG921A)
8 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at)
2 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X
S Supports a maximum of 8 autosensing 10/100/1000 ports plus 2 SFP 100/1000 slots
1 RJ-45 console port to access limited CLI port
Additional ports and
slots
12.99(w) x 9.06(d) x 1.73(h) in (33 x 23 x 4.4 cm) (1U height)
Physical characteristics Dimensions
6.5 lb (2.95 kg)
Weight
Memory and processor MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 512 KB
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
14.8 Mpps (64-byte packets)
Throughput
20 Gbps
Routing/Switching
capacity
32 entries (IPv4), 32 entries (IPv6)
Routing table size
MAC address table size 8192 entries
76.33
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
10% to 90%, noncondensing
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 10% to 95%, noncondensing
relative humidity
up to 16,404 ft (5 km)
Altitude
Pressure: 0 dB No Fan
Acoustic
50/60 Hz
Electrical characteristics Frequency
100 - 240 VAC
AC voltage
Maximum power rating 94 W
65 W PoE+
PoE power
Maximum power rating and maximum heat dissipation are the worst-case
Notes
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE power is the power supplied by the internal power supply. It is
dependent on the type and quantity of power supplies.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Safety
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2
Emissions
2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager;
Management
IEEE 802.3 Ethernet MIB
SFP port and copper ports work simultaneously, independent of each other, to provide a total of 10
Notes
Gigabit switching ports.
Page 11
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Technical Specifications
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1920 8G PoE+ (180W) Switch (JG922A)
8 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at)
2 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X
Supports a maximum of 8 autosensing 10/100/1000 ports plus 2 SFP 100/1000 slots
1 RJ-45 console port to access limited CLI port
Additional ports and
slots
12.99(w) x 9.06(d) x 1.73(h) in (33 x 23 x 4.4 cm) (1U height)
Physical characteristics Dimensions
7.05 lb (3.2 kg)
Weight
Memory and processor MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 512 KB
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
14.8 Mpps (64-byte packets)
Throughput
20 Gbps
Routing/Switching
capacity
32 entries (IPv4), 32 entries (IPv6)
Routing table size
MAC address table size 8192 entries
64.51
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
10% to 90%, noncondensing
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 10% to 95%, noncondensing
relative humidity
up to 16,404 ft (5 km)
Altitude
Low-speed fan: 43.6 dB, High-speed fan: 51.5 dB; ISO 7779
Acoustic
50/60 Hz
Electrical characteristics Frequency
100 - 240 VAC
AC voltage
Maximum power rating 235 W
180 W PoE+
PoE power
Maximum power rating and maximum heat dissipation are the worst-case
Notes
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE power is the power supplied by the internal power supply. It is
dependent on the type and quantity of power supplies.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Safety
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2
Emissions
2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager;
Management
IEEE 802.3 Ethernet MIB
Page 12
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Technical Specifications
Notes
Services
SFP port and copper ports work simultaneously, independent of each other, to provide a total of 10
Gigabit switching ports.
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1920 16G Switch (JG923A)
16 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X
Supports a maximum of 16 autosensing 10/100/1000 ports plus 4 SFP 100/1000 slots
1 RJ-45 console port to access limited CLI port
Additional ports and
slots
17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U height)
Physical characteristics Dimensions
4.74 lb (2.15 kg)
Weight
Memory and processor MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 512 KB
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
29.8 Mpps (64-byte packets)
Throughput
40 Gbps
Routing/Switching
capacity
32 entries (IPv4), 32 entries (IPv6)
Routing table size
MAC address table size 8192 entries
125
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
10% to 90%, noncondensing
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 10% to 95%, noncondensing
relative humidity
up to 16,404 ft (5 km)
Altitude
No Fan
Acoustic
50/60 Hz
Electrical characteristics Frequency
100 - 240 VAC
AC voltage
Maximum power rating 13 W
Maximum power rating and maximum heat dissipation are the worst-case
Notes
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Safety
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2
Emissions
2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager;
Management
IEEE 802.3 Ethernet MIB
SFP ports and copper ports can work simultaneously, independent of each other, to provide a total of
Notes
Page 13
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Technical Specifications
Services
20 Gigabit Ethernet-capable ports.
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1920 24G Switch (JG924A)
24 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X
Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 SFP 100/1000 slots
1 RJ-45 console port to access limited CLI port
Additional ports and
slots
17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U height)
Physical characteristics Dimensions
4.96 lb (2.25 kg)
Weight
Memory and processor MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 512 KB
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
41.7 Mpps (64-byte packets)
Throughput
56 Gbps
Routing/Switching
capacity
32 entries (IPv4), 32 entries (IPv6)
Routing table size
MAC address table size 8192 entries
120.48
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
10% to 90%, noncondensing
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 10% to 95%, noncondensing
relative humidity
up to 16,404 ft (5 km)
Altitude
No Fan
Acoustic
50/60 Hz
Electrical characteristics Frequency
100 - 240 VAC
AC voltage
Maximum power rating 19 W
Maximum power rating and maximum heat dissipation are the worst-case
Notes
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Safety
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2
Emissions
2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager;
Management
IEEE 802.3 Ethernet MIB
SFP ports and copper ports can work simultaneously, independent of each other, to provide a total of
Notes
28 Gigabit Ethernet-capable ports.
Page 14
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Technical Specifications
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1920 24G PoE+ (180W) Switch (JG925A)
24 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at)
4 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X
Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 SFP 100/1000 slots
1 RJ-45 console port to access limited CLI port
Additional ports and
slots
17.32(w) x 9.37(d) x 1.73(h) in (44 x 23.8 x 4.4 cm) (1U height)
Physical characteristics Dimensions
7.5 lb (3.4 kg)
Weight
Memory and processor MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 512 KB
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
41.7 Mpps (64-byte packets)
Throughput
56 Gbps
Routing/Switching
capacity
32 entries (IPv4), 32 entries (IPv6)
Routing table size
MAC address table size 8192 entries
68.96
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
10% to 90%, noncondensing
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 10% to 95%, noncondensing
relative humidity
up to 16,404 ft (5 km)
Altitude
Power: 44.9 dB, Pressure: 53.3 dB; ISO 7779
Acoustic
50/60 Hz
Electrical characteristics Frequency
100 - 240 VAC
AC voltage
Maximum power rating 235 W
180 W PoE+
PoE power
Maximum power rating and maximum heat dissipation are the worst-case
Notes
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE power is the power supplied by the internal power supply. It is
dependent on the type and quantity of power supplies.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Safety
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2
Emissions
2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager;
Management
IEEE 802.3 Ethernet MIB
Page 15
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Technical Specifications
Notes
Services
SFP ports and copper ports work simultaneously, independent of each other, to provide a total of 28
Gigabit switching ports.
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1920 24G PoE+ (370W) Switch (JG926A)
24 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at)
4 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X
Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 SFP 100/1000 slots
1 RJ-45 console port to access limited CLI port
Additional ports and
slots
17.32(w) x 10.24(d) x 1.73(h) in (44 x 26 x 4.4 cm) (1U height)
Physical characteristics Dimensions
7.5 lb (3.4 kg)
Weight
Memory and processor MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 512 KB
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
up to 41.7 Mpps (64-byte packets)
Throughput
56 Gbps
Routing/Switching
capacity
32 entries (IPv4), 32 entries (IPv6)
Routing table size
MAC address table size 8192 entries
65.78
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
10% to 90%, noncondensing
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 10% to 95%, noncondensing
relative humidity
up to 16,404 ft (5 km)
Altitude
Low-speed fan: 44.9 dB, High-speed fan: 53.3 dB; ISO 7779
Acoustic
50/60 Hz
Electrical characteristics Frequency
100 - 240 VAC
AC voltage
Maximum power rating 474 W
370 W PoE+
PoE power
Maximum power rating and maximum heat dissipation are the worst-case
Notes
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE power is the power supplied by the internal power supply. It is
dependent on the type and quantity of power supplies and may be
supplemented with the use of an external power supply (EPS).
When supplemented with the use of an HP RPS1600 Redundant Power
System, up to 795 W of PoE+ can be supplied. Unit max. power
consumption with RPS is 833 W.
Page 16
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Technical Specifications
Safety
Emissions
Management
Notes
Services
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2
2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager;
IEEE 802.3 Ethernet MIB
SFP ports and copper ports can work simultaneously, independent of each other, to provide a total of
28 Gigabit switching ports.
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1920 48G Switch (JG927A)
48 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X
Supports a maximum of 48 autosensing 10/100/1000 ports plus 4 SFP 100/1000 slots
1 RJ-45 console port to access limited CLI port
Additional ports and
slots
17.32(w) x 9.37(d) x 1.73(h) in (44 x 23.8 x 4.4 cm) (1U height)
Physical characteristics Dimensions
6.94 lb (3.15 kg)
Weight
Memory and processor MIPS @ 650 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 1.5 MB
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
77.4 Mpps (64-byte packets)
Throughput
104 Gbps
Routing/Switching
capacity
32 entries (IPv4), 32 entries (IPv6)
Routing table size
MAC address table size 16384 entries
76.92
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
10% to 90%, noncondensing
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 10% to 95%, noncondensing
relative humidity
Altitude
Pressure: 49.7 dB; ISO 7779
Acoustic
50/60 Hz
Electrical characteristics Frequency
Achieved Miercom Certified Green Award
100 - 240 VAC
AC voltage
Maximum power rating 32 W
Maximum power rating and maximum heat dissipation are the worst-case
Notes
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
Page 17
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Technical Specifications
Safety
Emissions
Management
Notes
Services
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2
2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager;
IEEE 802.3 Ethernet MIB
SFP ports and copper ports work simultaneously, independent of each other, to provide a total of 52
Gigabit Ethernet-capable ports.
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1920 48G PoE+ (370W) Switch (JG928A)
48 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
I/O ports and slots
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at)
4 SFP 100/1000 Mbps slots (IEEE 802.3u Type 100BASE-FX, IEEE 802.3z Type 1000BASE-X
Supports a maximum of 48 autosensing 10/100/1000 ports plus 4 SFP 100/1000 slots
1 RJ-45 console port to access limited CLI port
Additional ports and
slots
17.32(w) x 17.32(d) x 1.73(h) in (44 x 44 x 4.4 cm) (1U height)
Physical characteristics Dimensions
9.48 lb (4.3 kg)
Weight
Memory and processor MIPS @ 650 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 1.5 MB
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
up to 77.4 Mpps (64-byte packets)
Throughput
104 Gbps
Routing/Switching
capacity
32 entries (IPv4), 32 entries (IPv6)
Routing table size
MAC address table size 16384 entries
44.44
Reliability
MTBF (years)
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
10% to 90%, noncondensing
Operating relative
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 10% to 95%, noncondensing
relative humidity
up to 16,404 ft (5 km)
Altitude
Low-speed fan: 47 dB, High-speed fan: 49.3 dB; ISO 7779
Acoustic
50/60 Hz
Electrical characteristics Frequency
100 - 240 VAC
AC voltage
Maximum power rating 492 W
370 W PoE+
PoE power
Maximum power rating and maximum heat dissipation are the worst-case
Notes
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
Page 18
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Technical Specifications
Safety
Emissions
Management
Notes
Services
PoE power is the power supplied by the internal power supply. It is
dependent on the type and quantity of power supplies and may be
supplemented with the use of an external power supply (EPS).
When supplemented with the use of an HP RPS1600 Redundant Power
System, up to 795 W of PoE+ can be supplied. Unit max. power
consumption with RPS is 876W.
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2
2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager;
IEEE 802.3 Ethernet MIB
SFP ports and copper ports can work simultaneously, independent of each other, to provide a total of
52 Gigabit switching ports.
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.
Standards and protocols Device management
(applies to all products in RFC 2819 RMON
series)
Web UI
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s (MSTP)
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.3 Type 10BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3i 10BASE-T
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
MIBs
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 2021 RMONv2 MIB
RFC 2233 Interface MIB
RFC 2233 Interfaces MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2667 IP Tunnel MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
Page 19
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Technical Specifications
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1D (STP)
RFC 1215 SNMP Generic traps
QoS/Cos
IEEE 802.1p (CoS)
RFC 2474 DiffServ Precedence, including 8 queues/port
Security
IEEE 802.1X Port Based Network Access Control
Page 20
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Accessories
HPE OfficeConnect 1920 Transceivers
Switch Series accessories HPE X121 1G SFP LC SX Transceiver
HPE X121 1G SFP LC LX Transceiver
HPE X121 1G SFP RJ45 T Transceiver
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
HPE X120 1G SFP RJ45 T Transceiver
Cables
HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
J4858C
J4859C
J8177C
JD118B
JD119B
JD089B
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Page 21
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
1 LC 1000BASE-SX port; Duplex: full only
HPE X121 1G SFP LC SX Ports
Transceiver (J4858C)
Physical characteristics Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
A small form-factor
pluggable (SFP) Gigabit Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
SX
Operating relative humidity: 5% to 85%, noncondensing
transceiver that provides a
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
full-duplex Gigabit solution
Altitude: up to 10,000 ft. (3 km)
up to 550 m on multimode
Power consumption typical: 0.4 W
Electrical
characteristics
fiber.
Power consumption maximum: 0.7 W
Type:
Cabling
•
62.5/125 µm or 50/125 µm (core/cladding) diameter, gradedindex, low metal content, multimode fiber optic, complying with
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
•
•
•
•
Services
HPE X121 1G SFP LC LX Ports
Transceiver (J4859C)
Physical characteristics
HPE X121 1G SFP LC LX
Environment
Transceiver: An SFP
format
gigabit transceiver with LC
connectors using LX
technology.
Cabling
2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full
only
Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)
Type:
•
Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content,
multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively; Low metal content, singlemode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2
Page 22
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Accessory Product Details
Type B1;
Maximum distance:
•
•
•
•
Notes
Services
HPE X121 1G SFP RJ45 Ports
T Transceiver (J8177C)
Physical characteristics
HPE X121 1G SFP RJ45
T Transceiver: An SFP
Environment
format
gigabit transceiver with
RJ45 connectors using
1000BaseT technology.
Cabling
2-550 m (multimode 62.5 µm core diameter, 500 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 500 MHz*km
bandwidth)
2-10,000 m (single-mode fiber)
A mode conditioning patch cord may be needed in some multimode fiber
installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T); Duplex: full
only
Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM
airflow over the SFP module
Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C),
noncondensing
Altitude: up to 10,000 ft. (3000 km)
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential
4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP)
balanced, complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
•
Notes
100 m
Power consumption is nominally 1 watt.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the J8177C 1000BaseT Mini-GBIC" on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J8177C Gigabit copper mini-GBIC is not supported on dualpersonality ports.
The J8177C is capable of 100 Mb operation. This is supported on only the
HP E8200zl, E5400zl, and HP E6200-24G-mGBIC yl Switches using
Page 23
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Accessory Product Details
Services
software version K.12.21 or later. Use the "auto-100" port setting to enable
100 Mb operation.
Important: The earlier J8177B does not support 100 Mb operation. When
used in the Switch gl 20-Port 10/100/1000 Module (J4908A), the
J8177C mini-GBIC can be installed in either the upper or lower mini-GBIC
port, but will block access to the other port.
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HPE X120 1G SFP LC SX Ports
Transceiver (JD118B)
Connectivity
A small form-factor
pluggable (SFP) Gigabit
SX transceiver that
provides a full-duplex
Gigabit solution up to
550m on a Multimode
fiber.
1 LC 1000BASE-SX port
LC
Connector type
850 nm
Wavelength
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
Physical characteristics Dimensions
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
0.8 W
Electrical characteristics Power consumption
typical
1.0 W
Power consumption
maximum
Maximum distance:
Cabling
• FDDI Grade distance = 220m
• OM1 = 275m
• OM2 = 500m
• OM3 = Not Specified by standard
Cable length
up to 550m
Fiber type
Multi Mode
Refer to the Hewlett Packard Enterprise website at
Services
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
HPE X120 1G SFP LC LX Ports
Transceiver (JD119B)
Connectivity
A small form-factor
pluggable (SFP) Gigabig
LX transceiver that
provides a full duplex
Gigabit solution up to
550m on MMF or 10Km
on SMF
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
LC
Connector type
1300 nm
Wavelength
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
Physical characteristics Dimensions
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
0.8 W
Electrical characteristics Power consumption
typical
1.0 W
Power consumption
maximum
Cable type:
Cabling
Either single mode or multimode;
Maximum distance:
• 550m for Multimode
Page 24
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Accessory Product Details
Services
HPE X120 1G
SFP RJ45 T
Transceiver
(JD089B)
Ports
Connectivity
Physical
characteristics
Electrical
characteristics
Cabling
• 10km for Singlemode
Fiber type
Both
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
RJ-45
Connector type
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Dimensions
0.07 lb. (0.03 kg)
Full configuration weight
0.8 W
Power consumption typical
1.0 W
Power consumption maximum
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4-pair unshielded
twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab
1000BASE-T
Maximum distance:
• 100m
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level descriptions and
product numbers. For details about services and response times in your area, please contact
your local Hewlett Packard Enterprise sales office.
Services
HPE LC to LC MultiCabling
mode OM3 2-Fiber 0.5m
1-Pack Fiber Optic Cable
(AJ833A)
Notes
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
•
•
•
•
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Page 25
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Accessory Product Details
•
•
•
Services
HPE LC to LC MultiCabling
mode OM3 2-Fiber 1.0m
1-Pack Fiber Optic Cable
(AJ834A)
Notes
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
•
•
•
•
•
•
•
Services
HPE LC to LC MultiCabling
mode OM3 2-Fiber 2.0m
1-Pack Fiber Optic Cable
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
Page 26
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Accessory Product Details
(AJ835A)
distances of up to 300 m;
Notes
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
•
•
•
•
•
•
•
Services
HPE LC to LC MultiCabling
mode OM3 2-Fiber 5.0m
1-Pack Fiber Optic Cable
(AJ836A)
Notes
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable type:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable
and Ethernet assembly with LC duplex connectors on one end and LC
duplex connectors on other end.
•
•
•
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
Page 27
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Accessory Product Details
•
•
•
•
•
•
•
•
HPE LC to LC Multimode OM3 2-Fiber
15.0m 1-Pack Fiber
Optic Cable (AJ837A)
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Notes
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
•
•
•
•
•
•
•
Services
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
Page 28
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Accessory Product Details
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
HPE LC to LC Multimode OM3 2-Fiber
30.0m 1-Pack Fiber
Optic Cable (AJ838A)
Cabling
Notes
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
•
•
•
•
•
•
•
•
•
•
HPE LC to LC Multimode OM3 2-Fiber
50.0m 1-Pack Fiber
Optic Cable (AJ839A)
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Notes
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
•
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
Page 29
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Accessory Product Details
•
•
•
•
•
•
•
•
•
•
Services
HPE Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
1m Cable (QK732A)
Services
HPE Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
2m Cable (QK733A)
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
Page 30
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Accessory Product Details
Services
HPE Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
5m Cable (QK734A)
Services
HPE Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
15m Cable (QK735A)
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Page 31
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Accessory Product Details
Services
HPE Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
30m Cable (QK736A)
Services
HPE Premier Flex LC/LC Notes
Multi-mode OM4 2 fiber
50m Cable (QK737A)
Services
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the Hewlett Packard Enterprise website at
Page 32
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Accessory Product Details
http://www.hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
Page 33
QuickSpecs
HPE OfficeConnect 1920 Switch Series
Summary of Changes
Date
07-Oct-2016
29-Apr-2016
Version History
From Version 5 to 6
From Version 4 to 5
Action
Changed
Changed
01-Dec-2015
09-Feb-2015
01-Dec-2014
From Version 3 to 4
From Version 2 to 3
From Version 1 to 2
Changed
Added
Changed
Description of Change:
Minor edits on Technical Specifications
Document name changed to HPE OfficeConnect 1920
Switch Series, SKU descriptions updated. Changes made
on Features and Benefits and Technical Specifications.
Overview and Technical Specifications updated
SKU JG928A added
Updated Warranty and support
Sign up for updates
© Copyright 2016 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
To learn more, visit: http://www.hpe.com/networking
c04394247 - 15061 - Worldwide - V6 - 7-October-2016
Page 34
Download PDF
Similar pages