Cisco Catalyst 2960-X Series Switches Data Sheet

Data Sheet
Cisco Catalyst 2960-X Series Switches
Product Overview
Cisco® Catalyst® 2960-X Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide
enterprise-class access for campus and branch applications (Figure 1). Designed for operational simplicity to lower
total cost of ownership, they enable scalable, secure and energy-efficient business operations with intelligent
services and a range of advanced Cisco IOS® Software features.
Figure 1.
A Cisco Catalyst 2960-X Series Switch Family
Product Highlights
Cisco Catalyst 2960-X switches feature:
●
24 or 48 Gigabit Ethernet ports with line-rate forwarding performance
●
Gigabit Small Form-Factor Pluggable (SFP) or 10G SFP+ uplinks
●
FlexStack Plus for stacking of up to 8 switches with 80 Gbps of stack throughput (optional)
●
Power over Ethernet Plus (PoE+) support with up to 740W of PoE budget
●
24-port PoE fanless switch for deployment outside the wiring closet
●
Reduced power consumption and advanced energy management features
●
USB and Ethernet management interfaces for simplified operations
●
Application visibility and capacity planning with integrated NetFlow-Lite
●
LAN Base or LAN Lite Cisco IOS® software features
●
Enhanced limited lifetime warranty (E-LLW) offering next-business-day hardware replacement
Cisco Catalyst 2960-XR models also offer:
●
Power resiliency with optional dual field-replaceable power supplies
●
IP Lite Cisco IOS® software with dynamic routing and Layer 3 features
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 26
Switch Models and Configurations
Catalyst 2960-X switches include a single fixed power supply and are available with either the Cisco IOS LAN Base
or LAN Lite feature set. Catalyst 2960-XR switch models include a field-replaceable modular power supply and can
accommodate a second power supply. Catalyst 2960-XR is available only with the Cisco IOS IP Lite feature set.
Table 1.
Cisco Catalyst 2960-X Configurations
Model
10/100/1000
Uplink Interfaces
Cisco IOS
Software Image
Available PoE
Power
Ethernet Ports
FlexStack-Plus
Capability
Cisco Catalyst 2960X-48FPD-L
48
2 SFP+
LAN Base
740W
Y
Cisco Catalyst 2960X-48LPD-L
48
2 SFP+
LAN Base
370W
Y
Cisco Catalyst 2960X-24PD-L
24
2 SFP+
LAN Base
370W
Y
Cisco Catalyst 2960X-48TD-L
48
2 SFP+
LAN Base
-
Y
Cisco Catalyst 2960X-24TD-L
24
2 SFP+
LAN Base
-
Y
Cisco Catalyst 2960X-48FPS-L
48
4 SFP
LAN Base
740W
Y
Cisco Catalyst 2960X-48LPS-L
48
4 SFP
LAN Base
370W
Y
Cisco Catalyst 2960X-24PS-L
24
4 SFP
LAN Base
370W
Y
Cisco Catalyst 2960X-24PSQ-L
24 (8PoE)
2 SFP,
2 10/100/1000BT
LAN Base
110W
-
Cisco Catalyst 2960X-48TS-L
48
4 SFP
LAN Base
-
Y
Cisco Catalyst 2960X-24TS-L
24
4 SFP
LAN Base
-
Y
Cisco Catalyst 2960X-48TS-LL
48
2 SFP
LAN Lite
-
-
Cisco Catalyst 2960X-24TS-LL
24
2 SFP
LAN Lite
-
-
Table 2.
Cisco Catalyst 2960-XR Configurations
Model
10/100/1000
Ethernet Ports
Uplink Interfaces
Cisco IOS
Software Image
Available PoE
Power
Power Supply
Cisco Catalyst 2960XR-48FPD-I
48
2 SFP+
IP Lite
740W
1025WAC
Cisco Catalyst 2960XR-48LPD-I
48
2 SFP+
IP Lite
370W
640WAC
Cisco Catalyst 2960XR-24PD-I
24
2 SFP+
IP Lite
370W
640WAC
Cisco Catalyst 2960XR-48TD-I
48
2 SFP+
IP Lite
-
250WAC
Cisco Catalyst 2960XR-24TD-I
24
2 SFP+
IP Lite
-
250WAC
Cisco Catalyst 2960XR-48FPS-I
48
4 SFP
IP Lite
740W
1025WAC
Cisco Catalyst 2960XR-48LPS-I
48
4 SFP
IP Lite
370W
640WAC
Cisco Catalyst 2960XR-24PS-I
24
4 SFP
IP Lite
370W
640WAC
Cisco Catalyst 2960XR-48TS-I
48
4 SFP
IP Lite
-
250WAC
Cisco Catalyst 2960XR-24TS-I
24
4 SFP
IP Lite
-
250WAC
Catalyst 2960-X series Software Features
All Catalyst 2960-X Series Switches use a single Universal Cisco IOS Software Image for all SKUs. Depending on
the switch model, the Cisco IOS image automatically configures the LAN Lite, LAN Base, or IP Lite feature set.
LAN Lite models have reduced functionality and scalability for small deployments with basic requirements. Cisco
Catalyst 2960-X Family of Switches are available with the LAN Base and LAN Lite feature sets and Catalyst 2960XR Family of switches are available IP Lite feature sets.
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 26
Note that each switch model is tied to a specific feature level; LAN Lite cannot be upgraded to LAN Base and LAN
Base cannot be upgraded to IP Lite.
For more information about the features included in the LAN Lite, LAN Base and IP Lite feature sets, refer to Cisco
Feature Navigator: http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp.
Cisco Catalyst 2960-XR IP-Lite High-Performance Routing
The Cisco hardware routing architecture delivers extremely high-performance IP routing in the Cisco Catalyst
2960-XR IP-Lite Switches:
●
IP unicast routing protocols (Static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng,
and EIGRP-Stub) are supported for network routing applications.
●
Advanced IP unicast routing protocols (OSPF for Routed Access) are supported for load balancing and
constructing scalable LANs. IPv6 routing (OSPFv3) is supported in hardware for maximum performance.
●
EIGRPv3-Stub and PIMv6-Stub are supported as a part of the IPv6 routing suite.
●
Equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.
●
Policy-based routing (PBR) allows superior control by facilitating flow redirection regardless of the routing
protocol configured (for both IPv4 and IPv6).
●
Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP) provides
dynamic load balancing and failover for routed links.
●
Protocol Independent Multicast (PIM) for IP multicast is supported, including PIM sparse mode (PIM-SM),
PIM dense mode (PIM-DM), PIM sparse-dense mode and Source Specific Multicast (SSM).
Network Security
The Cisco Catalyst 2960-X Series Switches provide a range of security features to limit access to the network and
mitigate threats, including:
●
MAC-based VLAN assignment enables different users to authenticate on different VLANs. This feature
enables each user to have a different data VLAN on the same interface.
●
Cisco TrustSec uses SXP to simplify security and policy enforcement throughout the network. For more
information about Cisco TrustSec security solutions, visit cisco.com/go/TrustSec.
●
Comprehensive 802.1X Features to control access to the network, including Flexible Authentication,
802.1x Monitor Mode, and RADIUS Change of Authorization.
●
IPv6 First-Hop Security enhances Layer-2 and Layer-3 network access from proliferating IPv6 devices
especially BYOD devices. It protects against rogue router advertisements, address spoofing, fake DHCP
replies and other risks introduced by IPv6 technology.
●
Device Sensor and Device Classifier enable seamless versatile device profiles including BYOD devices.
They also enable Cisco Identity Services Engine (ISE) to provision identity based security policies. This
feature is available on both the 2960-X and the 2960-XR product families.
●
Cisco Trust Anchor Technology enables easy distribution of a single universal image for all models of
Catalyst 2960-X by verifying the authenticity of IOS images. This technology allows the switch to perform
IOS integrity checks at boot-up by verifying the signature, verifying the Trusted Asset under Management
and authenticating the license.
●
Cisco Threat Defense features including Port Security, Dynamic ARP Inspection, and IP Source Guard.
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 26
●
Private VLANs restrict traffic between hosts in a common segment by segregating traffic at Layer 2, turning
a broadcast segment into a nonbroadcast multi access like segment. This feature is available in IP-Lite
feature set only.
◦ Private VLAN Edge provides security and isolation between switch ports, which helps ensure that users
cannot snoop on other users’ traffic.
●
Unicast Reverse Path Forwarding (uRPF) feature helps mitigate problems caused by the introduction of
malformed or forged (spoofed) IP source address into a network by discarding IP packets that lack a
verifiable IP source address. This feature is available in IP-Lite feature set only.
●
Multidomain Authentication allows an IP phone and a PC to authenticate on the same switch port while
placing them on appropriate voice and data VLAN.
●
Access Control Lists (ACLs) for IPv6 and IPv4 for security and QoS ACEs.
◦ VLAN ACLs on all VLANs prevent unauthorized data flows from being bridged within VLANs.
◦ Router ACLs define security policies on routed interfaces for control-plane and data-plane traffic. IPv6
ACLs can be applied to filter IPv6 traffic.
◦ Port-based ACLs for Layer 2 interfaces allow security policies to be applied on individual switch ports.
●
Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3
(SNMPv3) provide network security by encrypting administrator traffic during Telnet and SNMP sessions.
SSH Protocol, Kerberos, and the cryptographic version of SNMPv3 require a special cryptographic software
image because of U.S. export restrictions.
●
Switched Port Analyzer (SPAN), with bidirectional data support, allows Cisco Intrusion Detection System
(IDS) to take action when an intruder is detected.
●
TACACS+ and RADIUS authentication facilitates centralized control of the switch and restricts
unauthorized users from altering the configuration.
●
MAC Address Notification allows administrators to be notified of users added to or removed from the
network.
●
●
Multilevel security on console access prevents unauthorized users from altering the switch configuration.
Bridge protocol data unit (BPDU) Guard shuts down Spanning Tree Port Fast-enabled interfaces when
BPDUs are received to avoid accidental topology loops.
●
Spanning Tree Root Guard (STRG) prevents edge devices not in the network administrator’s control from
becoming Spanning Tree Protocol root nodes.
●
IGMP filtering provides multicast authentication by filtering out nonsubscribers and limits the number of
concurrent multicast streams available per port.
●
Dynamic VLAN assignment is supported through implementation of VLAN Membership Policy Server
client capability to provide flexibility in assigning ports to VLANs. Dynamic VLAN facilitates the fast
assignment of IP addresses.
Redundancy and Resiliency
Cisco Catalyst 2960-X Series Switches offer a number of redundancy and resiliency features to prevent outages
and help ensure that the network remains available:
●
Cross-stack EtherChannel provides the ability to configure Cisco EtherChannel technology across
different members of the stack for high resiliency.
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 26
●
Flexlink provides link redundancy with convergence time less than 100 milliseconds.
●
IEEE 802.1s/w Rapid Spanning Tree Protocol (RSTP) and Multiple Spanning Tree Protocol (MSTP)
provide rapid spanning-tree convergence independent of spanning-tree timers and also offer the benefit of
Layer 2 load balancing and distributed processing. Stacked units behave as a single spanning-tree node.
●
Per-VLAN Rapid Spanning Tree (PVRST+) allows rapid spanning-tree reconvergence on a per-VLAN
spanning-tree basis, without requiring the implementation of spanning-tree instances.
●
Cisco Hot Standby Router Protocol (HSRP) is supported to create redundant, fail safe routing topologies
in 2960-XR IP-Lite SKUs.
●
Switch-port auto-recovery (Error Disable) automatically attempts to reactivate a link that is disabled
because of a network error.
●
Power redundancy with an optional second power supply on 2960-XR models, or with an external RPS on
2960-X models.
Enhanced Quality of Service
The Cisco Catalyst 2960-X Series Switches offers intelligent traffic management that keeps everything flowing
smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data,
voice, and video traffic, all at wire speed. Primary QoS features include:
●
Up to eight egress queues per port and strict priority queuing so that the highest priority packets are
serviced ahead of all other traffic.
●
Shaped Round Robin (SRR) scheduling and Weighted Tail Drop (WTD) congestion avoidance.
●
Flow-based rate limiting and up to 256 aggregate or individual policers per port.
●
802.1p class of service (CoS) and Differentiated Services Code Point (DSCP) classification, with
marking and reclassification on a per-packet basis by source and destination IP address, MAC address, or
Layer 4 TCP/UDP port number.
●
Cross-stack QoS to allow QoS to be configured across a stack of 2960-X series switches.
●
The Cisco committed information rate (CIR) function provides bandwidth in increments as low as 8 Kbps.
●
Rate limiting is provided based on source and destination IP address, source and destination MAC
address, Layer 4 TCP/UDP information, or any combination of these fields, using QoS ACLs (IP ACLs or
MAC ACLs), class maps, and policy maps.
Cisco Catalyst 2960-X Series Switching Database Manager
Switching database manager (SDM) templates for LAN Base and IP Lite licenses allows the administrator to
automatically optimize the ternary content-addressable memory (TCAM) allocation to the desired features based
on deployment-specific requirements. MAC, routing, security, and QoS scalability numbers depend on the type of
template used in the switch.
Table 3.
Cisco Catalyst 2960-X Family LAN Lite and LAN Base Scalability Numbers
Resources
LAN Lite (Default)
LAN Base (Default)
Unicast MAC Addresses
16K
16K
IPv4 Unicast Direct Routes
320
2k
IPv4 Unicast Indirect Routes
32
1K
IPv6 Unicast Direct Routes
256
2K
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 26
Resources
LAN Lite (Default)
LAN Base (Default)
IPv6 Unicast Indirect Routes
0
1K
IPv4 Multicast Routes and IGMP Groups
1k
1K
IPv6 Multicast Groups
1k
1K
IPv4 QoS ACEs
384
500
IPv6 QoS ACEs
256
500
IPv4 Security ACEs
256
625
IPv6 Security ACEs
256
625
Table 4.
Cisco Catalyst 2960-XR Family IP Lite Scalability Numbers
Resources
Default (IP Lite)
VLAN (IP Lite)
IPv4 (IP Lite)
Unicast MAC Addresses
16K
32K
16K
IPv4 Unicast Direct Routes
4K
250
16K
IPv4 Unicast Indirect Routes
1.25K
250
8K
IPv6 Unicast Direct Routes
4K
250
0
IPv6 Unicast Indirect Routes
1.25K
250
0
IPv4 Multicast Routes and IGMP
Groups
1k
1K
1K
IPv6 Multicast Groups
1k
1K
0
IPv4 QoS ACEs
500
500
500
IPv6 QoS ACEs
250
500
0
IPv4 Security ACEs
1K
1K
875
IPv6 Security ACEs
500
500
0
IPv4 Policy Based Routing ACEs
500
0
375
Cisco FlexStack-Plus
Cisco FlexStack-Plus provides stacking of up to eight 2960-X switches with the optional FlexStack-Plus module
(Figure 2).
The FlexStack-Plus module is hot swappable and can be added to any Cisco Catalyst 2960-X or Catalyst 2960-XR
with a FlexStack-Plus slot. Switches connected to a stack will automatically upgrade to the stack’s Cisco IOS
Software version and transparently join the stack without additional intervention.
Cisco FlexStack-Plus and Cisco IOS Software offer true stacking, with all switches in a stack acting as a single
switch unit. FlexStack-Plus provides a unified data plane, unified configuration, and single IP address for switch
management. The advantages of true stacking include lower total cost of ownership and higher availability through
simplified management as well as cross-stack features including EtherChannel, SPAN, and FlexLink.
To provide investment protection, FlexStack-Plus is backwards-compatible with FlexStack. Cisco Catalyst 2960-X
LAN Base switches equipped with a FlexStack-Plus module can be stacked with Catalyst 2960-S and 2960-SF
LAN Base switches equipped with a FlexStack module (see Table 5).
Table 5.
FlexStack and FlexStack Plus Supported Combinations
2960-XR IP Lite
2960-X LAN Base
2960-S/SF LAN Base
2960-XR IP Lite
Yes
-
-
2960-X LAN Base
-
Yes
Yes
2960-S or 2960-SF LAN Base
-
Yes
Yes
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 26
Table 6.
FlexStack-Plus Scalability and Performance
Stack Members
Stack Bandwidth
Stack Limit
Cisco IOS Feature Set
2960-XR IP Lite
80G
8
IOS IP Lite
2960-XLAN Base
80G
8
IOS LAN Base
2960-X LAN Base mixed with
2960-S/SF LAN Base
40G
4
IOS LAN Base
Figure 2.
Cisco FlexStack-Plus Switch Stack
Power Supply
The Catalyst 2960-X switches comes with one fixed power-supply and options for an external redundant power
supply source (RPS2300).
The Catalyst 2960-XR switches support dual redundant power supplies. The Catalyst 2960-XR ships with one
power supply by default. The second power supply can be purchased at the time of ordering the switch or as a
spare. These power supplies have in-built fans to provide cooling.
Figure 3.
2960-XR Family Power Supply
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 26
The following table shows the different power supplies available in these switches and the available PoE power.
Table 7.
2960-XR Default Power Supply Configurations
Models
Default Power Supply
Available PoE Power
WS-C2960XR-24TS-I
PWR-C2-250WAC
-
PWR-C2-640WAC
370W
PWR-C2-1025WAC
740W
WS-C2960XR-48TS-I
WS-C2960XR-24TD-I
WS-C2960XR-48TD-I
WS-C2960XR-24PD-I
WS-C2960XR-48LPD-I
WS-C2960XR-24PS-I
WS-C2960XR-48LPS-I
WS-C2960XR-48FPD-I
WS-C2960XR-48FPS-I
Intelligent Power over Ethernet Plus
Cisco Catalyst 2960-Xseries switches support both IEEE 802.3af Power over Ethernet (PoE) and IEEE 802.3at
PoE+ (up to 30W per port) to deliver lower total cost of ownership for deployments that incorporate Cisco IP
phones, Cisco Aironet® wireless access points, or other standards-compliant PoE/PoE+ end devices. PoE removes
the need to supply wall power to PoE-enabled devices and eliminates the cost of adding electrical cabling and
circuits that would otherwise be necessary in IP phone and WLAN deployments.
The Catalyst 2960-X series PoE power allocation is dynamic and power mapping scale up to a maximum of 740W
PoE+ power.
The 2960-XR switch configurations offer the additional benefit of dual redundant power supplies. If both power
supplies are used, then the 2960-XR shares the load between the two power supplies for non stop power.
Table 8.
*
2960-X PoE and PoE+ Power Capacity
Switch Model
Maximum Number of PoE+ (IEEE
802.3at) Ports*
Maximum Number of PoE (IEEE
802.3af) Ports*
Available PoE Power
(Single PS Source)
Cisco Catalyst 2960X-48FPD-L
24 ports up to 30W
48 ports up to 15.4W
740W
Cisco Catalyst 2960X-48LPD-L
12 ports up to 30W
24 ports up to 15.4W
370W
Cisco Catalyst 2960X-24PD-L
12 ports up to 30W
24 ports up to 15.4W
370W
Cisco Catalyst 2960X-48FPS-L
24 ports up to 30W
48 ports up to 15.4W
740W
Cisco Catalyst 2960X-48LPS-L
12 ports up to 30W
24 ports up to 15.4W
370W
Cisco Catalyst 2960X-24PS-L
12 ports up to 30W
24 ports up to 15.4W
370W
Cisco Catalyst 2960X-24PSQ-L
3 ports up to 30W
7 ports up to 15.4W
110W
Cisco Catalyst 2960XR-48FPD-I
24 ports up to 30W
48 ports up to 15.4W
740W
Cisco Catalyst 2960XR-48LPD-I
12 ports up to 30W
24 ports up to 15.4W
370W
Cisco Catalyst 2960XR-24PD-I
12 ports up to 30W
24 ports up to 15.4W
370W
Cisco Catalyst 2960XR-48FPS-I
24 ports up to 30W
48 ports up to 15.4W
740W
Cisco Catalyst 2960XR-48LPS-I
12 ports up to 30W
24 ports up to 15.4W
370W
Cisco Catalyst 2960XR-24PS-I
12 ports up to 30W
24 ports up to 15.4W
370W
Intelligent power management allows flexible power allocation across all ports.
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 26
Table 9.
2960-XR Available PoE and Switch Power Capabilities with Different Combinations of Power Supplies
Primary Power Supply
Secondary Power Supply
Available Power for PoE+
Switch Power
Redundancy
Available PoE Power
When One PS fails
PWR-C2-250WAC
-
-
No
-
PWR-C2-250WAC
PWR-C2-250WAC
-
Yes
-
PWR-C2-640WAC
-
370W
No
-
PWR-C2-640WAC
PWR-C2-640WAC
370W
Yes
370W
PWR-C2-1025WAC
-
740W
No
-
PWR-C2-1025WAC
PWR-C2-1025WAC
740W
Yes
740W
Application Visibility
Catalyst 2960-X Series Switches support NetFlow Lite, which enables IT teams to understand the mix of traffic on
their network and identify anomalies by capturing and recording specific packet flows. NetFlow Lite supports
flexible sampling of the traffic, and exports flow data in the NetFlow Version 9 format for analysis on a wide range
of Cisco and third-party collectors.
NetFlow Lite is included on all Catalyst 2960-X and 2960-XR LAN Base and IP Lite models.
Cisco Catalyst SmartOperations
Cisco Catalyst SmartOperations is a comprehensive set of capabilities that simplify LAN planning, deployment,
monitoring, and troubleshooting. Deploying SmartOperations tools reduces the time and effort required to operate
the network and lowers total cost of ownership (TCO).
●
Cisco AutoConfig services determine the level of network access provided to an endpoint based on the
type of the endpoint device. This feature also permits hard-binding between the end device and the
interface.
●
Cisco Smart Install services enable minimal-touch deployment by providing automated Cisco IOS
Software image installation and configuration when new switches are connected to the network. This
enables network administrators to remotely manage Cisco IOS Software image installs and upgrades.
●
Cisco Auto SmartPorts services enable automatic configuration of switch ports as devices connect to the
switch, with settings optimized for the device type resulting in zero-touch port-policy provisioning.
●
Cisco Auto QoS is a service that automatic configuration of QoS that allows switch to manage QoS
policies based on traffic types resulting in zero-touch traffic engineering. Auto-QoS supports 8 egress
queues in both 2960-X and 2960-XR product families.
●
Cisco Smart Troubleshooting is an extensive array of diagnostic commands and system health checks
within the switch, including Smart Call Home. The Cisco GOLD® (Generic Online Diagnostics) and Cisco
online diagnostics on switches in live networks help predicting and detecting failures faster.
For more information about Cisco Catalyst SmartOperations, visit cisco.com/go/SmartOperations.
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 26
Operational Simplicity Features
●
Cisco AutoSecure provides a single-line CLI to enable base line security features (Port Security, DHCP
snooping, DAI). This feature simplifies security configurations with a single touch.
●
Dynamic Host Configuration Protocol (DHCP) autoconfiguration of multiple switches through a boot
server eases switch deployment.
●
Stacking master configuration management and Cisco FlexStack Plus technology helps ensure that all
switches are automatically upgraded when the master switch receives a new software version. Automatic
software version checking and updating help ensure that all stack members have the same software
version.
●
Autonegotiation on all ports automatically selects half- or full-duplex transmission mode to optimize
bandwidth.
●
Dynamic Trunking Protocol (DTP) facilitates dynamic trunk configuration across all switch ports.
●
Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel® groups or Gigabit
EtherChannel groups to link to another switch, router, or server.
●
Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that
conform to IEEE 802.3ad. This feature is similar to Cisco EtherChannel technology and PAgP.
●
Automatic media-dependent interface crossover (MDIX) automatically adjusts transmit and receive pairs
if an incorrect cable type (crossover or straight-through) is installed.
●
Unidirectional Link Detection Protocol (UDLD) and Aggressive UDLD allow unidirectional links caused
by incorrect fiber-optic wiring or port faults to be detected and disabled on fiber-optic interfaces.
●
Switching Database Manager (SDM) templates for access, routing, and VLAN deployment allow the
administrator to easily maximize memory allocation to the desired features based on deployment-specific
requirements.
●
Local Proxy Address Resolution Protocol (ARP) works in conjunction with Private VLAN Edge to
minimize broadcasts and maximize available bandwidth.
●
VLAN1 minimization allows VLAN1 to be disabled on any individual VLAN trunk.
●
Smart Multicast, with Cisco FlexStack-Plus technology, allows the Cisco Catalyst 2960-X Series to offer
greater efficiency and support for more multicast data streams such as video by putting each data packet
onto the backplane only once.
●
Internet Group Management Protocol (IGMP) Snooping for IPv4 and IPv6 MLD v1 and v2 Snooping
provide fast client joins and leaves of multicast streams and limit bandwidth-intensive video traffic to only
the requestors.
●
Multicast VLAN Registration (MVR) continuously sends multicast streams in a multicast VLAN while
isolating the streams from subscriber VLANs for bandwidth and security reasons.
●
Per-port broadcast, multicast, and unicast storm control prevents faulty end stations from degrading
overall systems performance.
●
Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier
administration and troubleshooting.
●
Cisco VLAN Trunking Protocol (VTP) supports dynamic VLANs and dynamic trunk configuration across
all switches.
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 10 of 26
●
Remote Switch Port Analyzer (RSPAN) allows administrators to remotely monitor ports in a Layer 2
switch network from any other switch in the same network.
●
For enhanced traffic management, monitoring, and analysis, the Embedded Remote Monitoring (RMON)
software agent supports four RMON groups (history, statistics, alarms, and events).
●
Layer 2 trace route eases troubleshooting by identifying the physical path that a packet takes from source
to destination.
●
Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading
from a centralized location.
●
Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches.
Power Management
The 2960-X switches offer a range industry leading features for effective energy efficiency and energy
management. 2960-X Series are the greenest switches in the industry.
Switch Hibernation Mode (SHM) is an industry first and available on all 2960-X series switches. This feature puts
the switch in ultra low power mode during periods of non-operation such as nights or weekends. Switch
Hibernation Mode on the 2960-X switches can be scheduled using EnergyWise compliant management software.
IEEE 802.3az EEE (Energy Efficient Ethernet) enables ports to dynamically sense idle periods between traffic
bursts and quickly switch the interfaces into a low power idle mode, reducing power consumption.
Cisco EnergyWise policies can be used to control the power consumed by PoE-powered endpoints, desktop and
data-center IT equipment, and a wide range of building infrastructure. EnergyWise technology is included on all
Cisco Catalyst 2960-X Series Switches.
For more information about Cisco EnergyWise™, visit cisco.com/go/energywise.
Network Management
The Cisco Catalyst 2960-XSeries Switches offer a superior CLI for detailed configuration and administration.
2960-X Series Switches are also supported in the full range of Cisco network management solutions.
Cisco Prime Infrastructure
Cisco Prime™ network management solutions provide comprehensive network lifecycle management. Cisco Prime
Infrastructure provides an extensive library of easy-to-use features to automate the initial and day-to-day
management of your Cisco network. Cisco Prime integrates hardware and software platform expertise and
operational experience into a powerful set of workflow-driven configuration, monitoring, troubleshooting, reporting,
and administrative tools.
For detailed information about Cisco Prime, visit cisco.com/go/prime.
Cisco Network Assistant
A Cisco network management application designed for small and medium-sized business (SMB) networks with up
to 250 users that runs on PCs, Tablets and even SmartPhones, Cisco Network Assistant offers centralized network
management and configuration capabilities. This application also features an intuitive GUI where users can easily
apply common services across Cisco switches, routers, and access points.
For detailed information about Cisco Network Assistant, visit cisco.com/go/cna.
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 11 of 26
Security Management
Cisco Identity Services Engine (ISE) support enables the 2960-XR switches to offer security management for all
devices connected to it.
Figure 4.
Fanless Quiet Cool 24-Port PoE Switch
The Cisco Catalyst 2960-X Series adds a new member to its 2960-X family, the WS-C2960X-24PSQ-L (Cool). This
is a 24-port 10M/100M/1000M switch that can power up to 8 ports of PoE (first eight ports only) with ability to
deliver a sum total of 110W of PoE power. This switch has four Gigabit Ethernet uplinks: two of them SFP and the
other two 10M/100M/1000M copper interfaces enabling choice of fiber or copper connectivity to the aggregation
point. This switch ships with the Cisco IOS LAN Base image.
Some important 2960-X “cool” switch highlights are:
●
Extends a highly secure, intelligent, managed Cisco Catalyst infrastructure with a single Ethernet cable or
fiber from the wiring closet
●
Support for advanced security and intelligent services, including Netflow-Lite and Switch Hibernation,
including voice, video, AP powering, and Cisco Enterprise Network services to remote endpoints
●
Less than 12” depth fit in user work spaces where multiple cable runs could be challenging with very low
power consumption and heat dissipation
●
Higher MTBF rates due to no moving mechanical parts, no fans help ensure that 2960X cool switch is
convenient to be used for colocated applications
●
Easy to deploy using smart-install, configure with auto-smart-ports and device sensors and manage using
Cisco Prime or CNA
2960-X Cool Switch Use Cases
Retail
Major retailers are increasingly moving customer-facing IP-based applications and services to the middle of the
sales floor or POS that is far away from their access router that connects the retail outlets to the outside network. A
typical retail outlet needs to serve customers at multiple sales points, each with a POS machine, phone, printer, or
video display with network and some PoE powering. Because of their quiet operation and ability to cater to up to 24
ports with flexible mounting options, these switches are ideally suited for mounting in confined spaces on the floor.
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 12 of 26
Education
The 2960X cool switch extends access to labs, classrooms, and other training rooms from the central/floor
distribution rooms, reducing cost of cabling and providing superior quality of service with enhanced security and
enterprise network features. Quiet operation and shallow depth make them ideally suited for classrooms or
confined areas nearby.
Defense
Defense establishments often look to an access switch that is portable in mobile units. These units require multiple
network access devices, some of them residing in inconvenient locations in the mobile unit that requires being
powered by the switch, reducing number of cables to that location and reducing possible failure sources. The
switch is expected to be very quiet and have longer MTBF rates, which is served by the 2960X cool switch.
Technical Specifications
Table 10.
Cisco Catalyst 2960-X Series Hardware
Hardware Specifications
Flash memory
128 MB for LAN Base & IP Lite SKUs, 64 MB for LAN Lite SKUs
DRAM
512 MB for LAN Base and 256 MB for LAN Lite
CPU
APM86392 600MHz dual core
Console Ports
USB (Type-B), Ethernet (RJ-45)
Storage Interface
USB (Type-A) for external flash storage
Network Management Interface
10/100 Mbps Ethernet (RJ-45)
Table 11.
Cisco Catalyst 2960-X Series Performance
Performance and Scalability
*
2960-X LAN Lite
2960-X LAN Base
2960-XR IP Lite
Forwarding bandwidth
50 Gbps
108 Gbps
108 Gbps
Switching bandwidth*
100 Gbps
216 Gbps
216 Gbps
Maximum active VLANs
64
1023
1023
VLAN IDs available
4096
4096
4096
Maximum transmission unit (MTU)L3 packet
9198 bytes
9198 bytes
9198 bytes
Jumbo frame - Ethernet frame
9216 bytes
9216 bytes
9216 bytes
Switching bandwidth is full-duplex capacity.
Table 12.
Cisco Catalyst 2960-X Series Forwarding Performance
Forwarding Rate: 64-Byte L3 Packets
Catalyst 2960-XFamily
Cisco Catalyst 2960X-48FPD-L
130.9 Mpps
Cisco Catalyst 2960X-48LPD-L
130.9 Mpps
Cisco Catalyst 2960X-24PD-L
95.2 Mpps
Cisco Catalyst 2960X-48TD-L
130.9 Mpps
Cisco Catalyst 2960X-24TD-L
95.2 Mpps
Cisco Catalyst 2960X-48FPS-L
107.1 Mpps
Cisco Catalyst 2960X-48LPS-L
107.1 Mpps
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 13 of 26
Forwarding Rate: 64-Byte L3 Packets
Cisco Catalyst 2960X-24PS-L
71.4 Mpps
Cisco Catalyst 2960X-24PSQ-L
71.4 Mpps
Cisco Catalyst 2960X-48TS-L
107.1 Mpps
Cisco Catalyst 2960X-24TS-L
71.4 Mpps
Cisco Catalyst 2960X-48TS-LL
104.2 Mpps
Cisco Catalyst 2960X-24TS-LL
68.5 Mpps
Catalyst 2960-XR Family
Cisco Catalyst 2960XR-48FPD-I
130.9 Mpps
Cisco Catalyst 2960XR-48LPD-I
130.9 Mpps
Cisco Catalyst 2960XR-24PD-I
95.2 Mpps
Cisco Catalyst 2960XR-48TD-I
130.9 Mpps
Cisco Catalyst 2960XR-24TD-I
95.2 Mpps
Cisco Catalyst 2960XR-48FPS-I
107.1 Mpps
Cisco Catalyst 2960XR-48LPS-I
107.1 Mpps
Cisco Catalyst 2960XR-24PS-I
71.4 Mpps
Cisco Catalyst 2960XR-48TS-I
107.1 Mpps
Cisco Catalyst 2960XR-24TS-I
71.4 Mpps
Table 13.
Cisco Catalyst 2960-X Series Mechanical Specifications
Models
Dimensions
Inches (H x D x W)
Centimeters (H x D x W)
WS-C2960X-48FPD-L
1.75 x 14.5 x 17.5
4.5 x 36.8 x 44.5
WS-C2960X-48LPD-L
1.75 x 14.5 x 17.5
4.5 x 36.8 x 44.5
WS-C2960X-48TD-L
1.75 x 11.0 x 17.5
4.5 x 27.9 x 44.5
WS-C2960X-24PD-L
1.75 x 14.5 x 17.5
4.5 x 36.8 x 44.5
WS-C2960X-24TD-L
1.75 x 11.0 x 17.5
4.5 x 27.9 x 44.5
WS-C2960X-48FPS-L
1.75 x 14.5 x 17.5
4.5 x 36.8 x 44.5
WS-C2960X-48LPS-L
1.75 x 14.5 x 17.5
4.5 x 36.8 x 44.5
WS-C2960X-48TS-L
1.75 x 11.0 x 17.5
4.5 x 27.9 x 44.5
WS-C2960X-24PS-L
1.75 x 14.5 x 17.5
4.5 x 36.8 x 44.5
WS-C2960X-24PSQ-L
1.73 x 11.03 x 17.5
4.45 x 28.0 x 44.5
WS-C2960X-24TS-L
1.75 x 11.0 x 17.5
4.5 x 27.9 x 44.5
WS-C2960X-48TS-LL
1.75 x 11.0 x 17.5
4.5 x 27.9 x 44.5
WS-C2960X-24TS-LL
1.75 x 11.0 x 17.5
4.5 x 27.9 x 44.5
Weights
Pounds
Kilograms
WS-C2960X-48FPD-L
12.9 lbs
5.8 Kg
WS-C2960X-48LPD-L
12.9 lbs
5.8 Kg
WS-C2960X-48TD-L
9.6 lbs
4.3 Kg
WS-C2960X-24PD-L
12.7 lbs
5.7 Kg
WS-C2960X-24TD-L
8.9 lbs
4.0 Kg
WS-C2960X-48FPS-L
12.9 lbs
5.8 Kg
WS-C2960X-48LPS-L
12.9 lbs
5.8 Kg
WS-C2960X-48TS-L
9.4 lbs
4.2 Kg
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 14 of 26
Models
WS-C2960X-24PS-L
12.8 lbs
5.8 kg
WS-C2960X-24PSQ-L
12.8 lbs
5.8 kg
WS-C2960X-24TS-L
8.9 lbs
4.0 kg
WS-C2960X-48TS-LL
8.9 lbs
4.0kg
WS-C2960X-24TS-LL
8.2 lbs
3.7 kg
Table 14.
Cisco Catalyst 2960-XR Series Mechanical Specifications
Models
Dimensions
Inches (H x D x W)
Centimeters (H x D x W)
WS-C2960XR-48FPD-I
1.75 x 16.0 x 17.5
4.45 x 40.8 x 44.5
WS-C2960XR-48LPD-I
1.75 x 16.0 x 17.5
4.45 x 40.8 x 44.5
WS-C2960XR-48TD-I
1.75 x 16.0 x 17.5
4.45 x 40.8 x 44.5
WS-C2960XR-24PD-I
1.75 x 16.0 x 17.5
4.45 x 40.8 x 44.5
WS-C2960XR-24TD-I
1.75 x 16.0 x 17.5
4.45 x 40.8 x 44.5
WS-C2960XR-48FPS-I
1.75 x 16.0 x 17.5
4.45 x 40.8 x 44.5
WS-C2960XR-48LPS-I
1.75 x 16.0x 17.5
4.45 x 40.8 x 44.5
WS-C2960XR-48TS-I
1.75 x 16.0 x 17.5
4.45 x 40.8 x 44.5
WS-C2960XR-24PS-I
1.75 x 16.0 x 17.5
4.45 x 40.8 x 44.5
WS-C2960XR-24TS-I
1.75 x 16.0 x 17.5
4.45 x 40.8 x 44.5
Weights
Pounds
Kilograms
WS-C2960XR-48FPD-I
14.6
6.6
WS-C2960XR-48LPD-
14.0
6.4
WS-C2960XR-48TD-I
13.3
6.1
WS-C2960XR-24PD-I
13.6
6.2
WS-C2960XR-24TD-I
13.0
5.9
WS-C2960XR-48FPS-I
14.7
6.7
WS-C2960XR-48LPS-I
14.2
6.4
WS-C2960XR-48TS-I
13.2
6.0
WS-C2960XR-24PS-I
13.7
6.2
WS-C2960XR-24TS-I
13.0
5.9
Table 15.
Cisco Catalyst 2960-X Series Environmental Specifications
Environmental Ranges
Fahrenheit
Centigrade
Operating temperature up to 5000 ft (1500 m)
23ºF to 113ºF
-5ºC to 45ºC
Operating temperature up to 10,000 ft (3000 m)
23ºF to 104ºF
-5ºC to 40ºC
Short-term exception at sea level*
23ºF to 131ºF
-5ºC to 55ºC
23ºF to 122ºF
-5ºC to 50ºC
23ºF to 113ºF
-5ºC to 45ºC
Short-term exception up to 5000 feet (1500 m)
*
Short-term exception up to 10,000 feet (3000 m)*
23º to 104ºF
-5ºC to 40ºC
Storage temperature up to 15,000 feet (4573 m)
-13º to 158ºF
-25º to 70ºC
Feet
Meters
Operating altitude
Up to 10,000
Up to 3000
Storage altitude
Up to 13,000
Up to 4000
Short-term exception up to 13,000 feet (4000 m)
*
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 15 of 26
Environmental Ranges
Operating relative humidity
10% to 95% noncondensing
Storage relative humidity
10% to 95% noncondensing
Acoustic Noise
Measured per ISO 7779 and declared per ISO 9296.
Bystander positions operating mode at 25°C ambient.
Sound Pressure
Sound Power
Model
LpA (Typical)
LpAD (Maximum)
LwA (Typical)
LwAD (Maximum)
Cisco Catalyst 2960X-48FPD-L
39 dB
43 dB
4.9 B
5.3 B
42 dB
46 dB
5.1 B
5.5 B
39 dB
43 dB
4.9 B
5.3 B
Cisco Catalyst 2960X-24PSQ-L
N/A
N/A
N/A
N/A
Cisco Catalyst 2960X-48TS-L
42 dB
46 dB
5.1 B
5.5 B
42 dB
46 dB
5.1 B
5.5 B
Cisco Catalyst 2960XR-48FPD-I
40dB
43dB
5.2B
5.5B
Cisco Catalyst 2960XR-48LPD-I
40dB
43dB
5.2B
5.5B
Cisco Catalyst 2960XR-24PD-I
40dB
43dB
5.2B
5.5B
Cisco Catalyst 2960XR-48TD-I
22dB
25dB
3.3B
3.6B
Cisco Catalyst 2960XR-24TD-I
22dB
25dB
3.3B
3.6B
Cisco Catalyst 2960XR-48FPS-I
40dB
43dB
5.2B
5.5B
Cisco Catalyst 2960XR-48LPS-I
40dB
43dB
5.2B
5.5B
Cisco Catalyst 2960XR-24PS-I
40dB
43dB
5.2B
5.5B
Cisco Catalyst 2960XR-48TS-I
22dB
25dB
3.3B
3.6B
Cisco Catalyst 2960XR-24TS-I
22dB
25dB
3.3B
3.6B
Cisco Catalyst 2960X-48LPD-L
Cisco Catalyst 2960X-24PD-L
Cisco Catalyst 2960X-48TD-L
Cisco Catalyst 2960X-24TD-L
Cisco Catalyst 2960X-48FPS-L
Cisco Catalyst 2960X-48LPS-L
Cisco Catalyst 2960X-24PS-L
Cisco Catalyst 2960X-24TS-L
Cisco Catalyst 2960X-48TS-LL
Cisco Catalyst 2960X-24TS-LL
Predicted Reliability
Model
MTBF in hours**
Cisco Catalyst 2960X-48FPD-L
233,370
Cisco Catalyst 2960X-48LPD-L
277,960
Cisco Catalyst 2960X-24PD-L
325,780
Cisco Catalyst 2960X-48TD-L
445,460
Cisco Catalyst 2960X-24TD-L
569,520
Cisco Catalyst 2960X-48FPS-L
232,610
Cisco Catalyst 2960X-48LPS-L
276,870
Cisco Catalyst 2960X-24PS-L
324,280
Cisco Catalyst 2960X-24PSQ-L
462,680
Cisco Catalyst 2960X-48TS-L
442,690
Cisco Catalyst 2960X-24TS-L
564,910
Cisco Catalyst 2960X-48TS-LL
476,560
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 16 of 26
Environmental Ranges
Cisco Catalyst 2960X-24TS-LL
622,350
Cisco Catalyst 2960X-STACK
17,128,090
Cisco Catalyst 2960XR-48FPD-I
231,590
Cisco Catalyst 2960XR-48LPD-I
275,430
Cisco Catalyst 2960XR-24PD-I
322,740
Cisco Catalyst 2960XR-48TD-I
440,880
Cisco Catalyst 2960XR-24TD-I
561,890
Cisco Catalyst 2960XR-48FPS-I
230,860
Cisco Catalyst 2960XR-48LPS-I
274,380
Cisco Catalyst 2960XR-24PS-I
321,290
Cisco Catalyst 2960XR-48TS-I
438,130
Cisco Catalyst 2960XR-24TS-I
557,320
Cisco PWR-C2-250WAC
1,000,000
Cisco PWR-C2-640WAC
1,000,000
Cisco PWR-C2-1025WAC
1,000,000
*
Not more than the following in a 1-year period: 96 consecutive hours, or 360 hours total, or 15 occurrences.
**
Currently estimates; Later will be Based on Telcordia SR-332 Issue 2 methodology.
Table 16.
Connectors and Interfaces
Connectors and Interfaces
Ethernet Interfaces
● 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
● 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
● 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
● 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
SFP and SFP+ Interfaces
For information about supported SFP/SFP+ modules, refer to the Transceiver Compatibility matrix tables at
cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html.
Indicator LEDs
● Per-port status: Link integrity, disabled, activity, speed, and full duplex
● System status: System, RPS, Stack link status, link duplex, PoE, and link speed
Stacking Interfaces
Cisco Catalyst 2960-XFlexStack-Plus stacking cables:
● CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length
● CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length
● CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length
Console
Cisco Catalyst 2960-X console cables:
● CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
● CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors
Power
● The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC
● Use the supplied AC power cord to connect the AC power connector to an AC power outlet
● The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch
● Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 17 of 26
Table 17.
Category
Management
Management and Standards Support
Specification
● BRIDGE-MIB
● CISCO-CABLE-DIAG-MIB
● CISCO-TC-MIB
● CICSO-TCP-MIB
● CISCO-CDP-MIB
● CISCO-CLUSTER-MIB
● CISCO-UDLDP-MIB
● CISCO-VLAN-IFTABLE
● CISCO-CONFIG-COPY-MIB
● CISCO-CONFIG-MAN-MIB
● RELATIONSHIP-MIB
● CISCO-VLAN-MEMBERSHIP-MIB
● CISCO-DHCP-SNOOPING-MIB
● CISCO-ENTITY-VENDORTYPE-OID-MIB
● CISCO-VTP-MIB
● ENTITY-MIB
● CISCO-ENVMON-MIB
● CISCO-ERR-DISABLE-MIB
● ETHERLIKE-MIB
● IEEE8021-PAE-MIB
● CISCO-FLASH-MIB
● CISCO-FTP-CLIENT-MIB
● IEEE8023-LAG-MIB
● IF-MIB
● CISCO-IGMP-FILTER-MIB
● CISCO-IMAGE-MIB
● INET-ADDRESS-MIB
● OLD-CISCO-CHASSIS-MIB
● CISCO-IP-STAT-MIB
● CISCO-LAG-MIB
● OLD-CISCO-FLASH-MIB
● OLD-CISCO-INTERFACES-MIB
● CISCO-MAC-NOTIFICATION-MIB
● CISCO-MEMORY-POOL-MIB
● OLD-CISCO-IP-MIB
● OLD-CISCO-SYS-MIB
● CISCO-PAGP-MIB
● CISCO-PING-MIB
● OLD-CISCO-TCP-MIB
● OLD-CISCO-TS-MIB
● CISCO-POE-EXTENSIONS-MIB
● CISCO-PORT-QOS-MIB
● RFC1213-MIB
● RMON-MIB
● CISCO-PORT-SECURITY-MIB
● CISCO-PORT-STORM-CONTROL-MIB
● RMON2-MIB
● SNMP-FRAMEWORK-MIB
● CISCO-PRODUCTS-MIB
● CISCO-PROCESS-MIB
● SNMP-MPD-MIB
● SNMP-NOTIFICATION-MIB
● CISCO-RTTMON-MIB
● CISCO-SMI-MIB
● SNMP-TARGET-MIB
● SNMPv2-MIB
● CISCO-STP-EXTENSIONS-MIB
● CISCO-SYSLOG-MIB
● TCP-MIB
● UDP-MIB
● ePM MIB
● CISCO-FLEXSTACK-PLUS-MIB (2960-X)
For an updated list of supported MIBs, refer to the MIB Locator at cisco.com/go/mibs.
Standards
● IEEE 802.1D Spanning Tree Protocol
● IEEE 802.1p CoS Prioritization
● IEEE 802.3 10BASE-T
● IEEE 802.3u 100BASE-TX
● IEEE 802.1Q VLAN
● IEEE 802.1s
● IEEE 802.3ab 1000BASE-T
● IEEE 802.3z 1000BASE-X
● IEEE 802.1w
● IEEE 802.1X
● RMON I and II standards
● SNMP v1, v2c, and v3
● IEEE 802.1ab (LLDP)
● IEEE 802.3ad
● IEEE 802.3az
● IEEE 802.3ae 10Gigabit Ethernet
● IEEE 802.3af and IEEE 802.3at
● IEEE 802.3ah (100BASE-X single/multimode fiber
only)
● IEEE 802.3x full duplex on 10BASE-T, 100BASETX, and 1000BASE-T ports
● IEEE 802.1ax
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 18 of 26
Category
Specification
RFC compliance
● RFC 768 - UDP
● RFC 783 - TFTP
● RFC 1901 - SNMP v2C
● RFC 1902-1907 - SNMP v2
● RFC 791 - IP
● RFC 792 - ICMP
● RFC 1981 - Maximum Transmission Unit (MTU) Path
Discovery IPv6
● FRC 2068 - HTTP
● RFC 793 - TCP
● RFC 826 - ARP
● RFC 854 - Telnet
● RFC 951 - Bootstrap Protocol (BOOTP)
● RFC 959 - FTP
● RFC 1112 - IP Multicast and IGMP
● RFC 1157 - SNMP v1
● RFC 1166 - IP Addresses
● RFC 1256 - Internet Control Message Protocol
(ICMP) Router Discovery
● RFC 1305 - NTP
Table 18.
● RFC 2131 - DHCP
● RFC 2138 - RADIUS
● RFC 2233 - IF MIB v3
● RFC 2373 - IPv6 Aggregatable Addrs
● RFC 2460 - IPv6
● RFC 2461 - IPv6 Neighbor Discovery
● RFC 2462 - IPv6 Autoconfiguration
● RFC 2463 - ICMP IPv6
● RFC 2474 - Differentiated Services (DiffServ) Precedence
● RFC 2597 - Assured Forwarding
● RFC 1492 - TACACS+
● RFC 1493 - Bridge MIB
● RFC 2598 - Expedited Forwarding
● RFC 2571 - SNMP Management
● RFC 1542 - BOOTP extensions
● RFC 1643 - Ethernet Interface MIB
● RFC 3046 - DHCP Relay Agent Information Option
● RFC 3376 - IGMP v3
● RFC 1757 - RMON
● RFC 3580 - 802.1X RADIUS
Voltage and Power Ratings
Input Voltage and Current
Model
Voltage (Auto ranging)
Current
Frequency
Cisco Catalyst 2960X-48FPD-L
100 to 240 VAC
9A-4A
50 to 60Hz
Cisco Catalyst 2960X-48LPD-L
5A-2A
Cisco Catalyst 2960X-24PD-L
5A-2A
Cisco Catalyst 2960X-48TD-L
1A - 0.5A
Cisco Catalyst 2960X-24TD-L
1A to 0.5A
Cisco Catalyst 2960X-48FPS-L
9A - 4A
Cisco Catalyst 2960X-48LPS-L
5A - 2A
Cisco Catalyst 2960X-24PS-L
5A - 2A
Cisco Catalyst 2960X-24PSQ-L
2A - 4A
Cisco Catalyst 2960X-48TS-L
1A-0.5A
Cisco Catalyst 2960X-24TS-L
1A - 0.5A
Cisco Catalyst 2960X-48TS-LL
1A - 0.5A
Cisco Catalyst 2960X-24TS-LL
1A - 0.5A
Cisco Catalyst 2960XR-48FPD-I
100 to 240 VAC
10A to 5A
Cisco Catalyst 2960XR-48LPD-I
6A to 3 A
Cisco Catalyst 2960XR-24PD-I
6A to 3 A
Cisco Catalyst 2960XR-48TD-I
1A to 0.5 A
Cisco Catalyst 2960XR-24TD-I
1A to 0.5 A
Cisco Catalyst 2960XR-48FPS-I
10A to 5 A
Cisco Catalyst 2960XR-48LPS-I
6A to 3 A
Cisco Catalyst 2960XR-24PS-I
6A to 3 A
Cisco Catalyst 2960XR-48TS-I
1A to 0.5 A
Cisco Catalyst 2960XR-24TS-I
1A to 0.5 A
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
50 to 60Hz
Page 19 of 26
Power Rating (Switch maximum consumption values)
Cisco Catalyst 2960X-48FPD-L
0.89 kVA
Cisco Catalyst 2960X-48LPD-L
0.48 kVA
Cisco Catalyst 2960X-24PD-L
0.47 kVA
Cisco Catalyst 2960X-48TD-L
0.049 kVA
Cisco Catalyst 2960X-24TD-L
0.034 kVA
Cisco Catalyst 2960X-48FPS-L
0.89 kVA
Cisco Catalyst 2960X-48LPS-L
0.49 kVA
Cisco Catalyst 2960X-24PS-L
0.49 kVA
Cisco Catalyst 2960X-24PSQ-L
0.16 kVA
Cisco Catalyst 2960X-48TS-L
0.051 kVA
Cisco Catalyst 2960X-24TS-L
0.039 kVA
Cisco Catalyst 2960X-48TS-LL
0.46KVA
Cisco Catalyst 2960X-24TS-LL
0.035KVA
Cisco Catalyst 2960XR-48FPD-I
0.89KVA
Cisco Catalyst 2960XR-48LPD-I
0.48KVA
Cisco Catalyst 2960XR-24PD-I
0.46KVA
Cisco Catalyst 2960XR-48TD-I
0.047KVA
Cisco Catalyst 2960XR-24TD-I
0.039KVA
Cisco Catalyst 2960XR-48FPS-I
0.89KVA
Cisco Catalyst 2960XR-48LPS-I
0.47KVA
Cisco Catalyst 2960XR-24PS-I
0.46KVA
Cisco Catalyst 2960XR-48TS-I
0.046KVA
Cisco Catalyst 2960XR-24TS-I
0.038KVA
DC Input Voltages (RPS Input) - Only for 2960-X LAN Base Switches
12V
53V
Cisco Catalyst 2960X-48FPD-L
4A
15A
Cisco Catalyst 2960X-48LPD-L
4A
8A
Cisco Catalyst 2960X-24PD-L
3A
8A
Cisco Catalyst 2960X-48TD-L
4A
N/A
Cisco Catalyst 2960X-24TD-L
3A
N/A
Cisco Catalyst 2960X-48FPS-L
4A
15A
Cisco Catalyst 2960X-48LPS-L
4A
8A
Cisco Catalyst 2960X-24PS-L
3A
8A
Cisco Catalyst 2960X-24PSQ-L
N/A
N/A
Cisco Catalyst 2960X-48TS-L
5A
N/A
Cisco Catalyst 2960X-24TS-L
4A
N/A
Note:
The wattage rating on the power supply does not represent actual power draw. It indicates the maximum
power draw possible by the power supply. This rating can be used for facility capacity planning. For PoE switches,
cooling requirements are smaller than total power draw as a significant portion of the load is dissipated in the
endpoints.
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 20 of 26
Table 19.
Power Consumption
1
Measured Power Consumption in Watts2
Model
0% Traffic3
10% Traffic
100% Traffic
Weighted Average
Cisco Catalyst 2960X-48FPD-L
50.8
65.9
66.7
66.0
Cisco Catalyst 2960X-48LPD-L
45.7
61.1
62.0
61.2
Cisco Catalyst 2960X-24PD-L
44.7
52.3
53.1
52.3
Cisco Catalyst 2960X-48TD-L
32.9
47.0
47.8
47.1
Cisco Catalyst 2960X-24TD-L
24.9
32.2
33.1
32.3
Cisco Catalyst 2960X-48FPS-L
51.9
66.6
66.8
66.6
Cisco Catalyst 2960X-48LPS-L
46.7
60.8
61.1
60.9
Cisco Catalyst 2960X-24PS-L
41.4
49.0
49.2
49.0
Cisco Catalyst 2960X-24PSQ-L
28.5
32.8
34.8
33.0
Cisco Catalyst 2960X-48TS-L
34.9
49.5
49.7
49.5
Cisco Catalyst 2960X-24TS-L
28.0
36.8
37.1
36.9
Cisco Catalyst 2960X-48TS-LL
31.4
44.3
44.5
44.4
Cisco Catalyst 2960X-24TS-LL
25.2
32.0
32.0
32.0
Cisco Catalyst 2960XR-48FPD-I
46.7
61.8
62.5
61.9
Cisco Catalyst 2960XR-48LPD-I
40.7
54.6
55.9
54.8
Cisco Catalyst 2960XR-24PD-I
36.1
42.9
43.7
43.0
Cisco Catalyst 2960XR-48TD-I
29.7
44.7
45.6
44.8
Cisco Catalyst 2960XR-24TD-I
29.3
37.2
38.1
37.3
Cisco Catalyst 2960XR-48FPS-I
44.8
58.5
58.8
58.5
Cisco Catalyst 2960XR-48LPS-I
37.9
52.8
53.0
52.9
Cisco Catalyst 2960XR-24PS-I
36.5
43.2
43.4
43.2
Cisco Catalyst 2960XR-48TS-I
30.0
44.8
45.0
44.8
Cisco Catalyst 2960XR-24TS-I
28.8
36.0
36.2
36.0
Table 20.
Safety and Compliance
Specification
Description
Safety
UL 60950-1 Second Edition
CAN/CSA-C22.2 No. 60950-1 Second Edition
EN 60950-1 Second Edition
IEC 60950-1 Second Edition
AS/NZS 60950-1
EMC - Emissions
47CFR Part 15 (CFR 47) Class A
AS/NZS CISPR22 Class A
CISPR22 Class A
EN55022 Class A
ICES003 Class A
VCCI Class A
EN61000-3-2
EN61000-3-3
KN22 Class A
CNS13438 Class A
1
Disclaimer: All power consumption numbers were measured under controlled laboratory conditions and are provided as
estimates.
2
ATIS Methodology
3
All Traffic measured with EEE enabled.
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 21 of 26
Specification
Description
EMC - Immunity
EN55024
CISPR24
EN300386
KN24
Environmental
Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU
Telco
Common Language Equipment Identifier (CLEI) code
US Government Certifications
USGv6 and IPv6 Ready Logo
Cisco Enhanced Limited Lifetime Hardware Warranty
Cisco Catalyst 2960-X Series Switches come with an enhanced limited lifetime warranty (E-LLW). The E-LLW
provides the same terms as Cisco’s standard limited lifetime warranty but adds next business day delivery of
replacement hardware, where available, and 90 days of 8X5 Cisco Technical Assistance Center (TAC) support.
Your formal warranty statement, including the warranty applicable to Cisco software, appears in the Cisco
information packet that accompanies your Cisco product. We encourage you to review carefully the warranty
statement shipped with your specific product before use.
Cisco reserves the right to refund the purchase price as its exclusive warranty remedy. For further information
about warranty terms, visit http://www.cisco.com/go/warranty.
Table 21.
Warranty Terms
Cisco Enhanced Limited Lifetime Hardware Warranty
Device covered
Applies to all Cisco Catalyst 2960-X Series Switches.
Warranty duration
As long as the original end user continues to own or use the product.
End-of-life policy
In the event of discontinuance of product manufacture, Cisco warranty support is limited to five (5) years from the
announcement of discontinuance.
Hardware replacement
Cisco or its service center will use commercially reasonable efforts to ship a Cisco Catalyst 2960-X replacement part
for next business day delivery, where available. Otherwise, a replacement will be shipped within ten (10) working
days after the receipt of the RMA request. Actual delivery times may vary depending on customer location.
Effective date
Hardware warranty commences from the date of shipment to customer (and in case of resale by a Cisco reseller, not
more than ninety [90] days after original shipment by Cisco).
TAC support
Cisco will provide during customer's local business hours, 8 hours per day, 5 days per week basic configuration,
diagnosis, and troubleshooting of device-level problems for up to 90 days from the date of shipment of the originally
purchased Cisco Catalyst 2960-X product. This support does not include solution or network-level support beyond
the specific device under consideration.
Cisco.com Access
Warranty allows guest access only to Cisco.com.
Software Policy
Customers with Cisco Catalyst IP Lite, LAN Base and LAN Lite software feature sets will be provided with
maintenance updates and bug fixes designed to maintain the compliance of the software with published
specifications, release notes, and industry standards compliance as long as the original end user continues to own
or use the product or up to one year from the end-of-sale date for this product, whichever occurs earlier.
This policy supersedes any previous warranty or software statement and is subject to change without notice.
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 22 of 26
Technical Support and Services
Table 22.
Technical Services Available for Cisco Catalyst 2960-X Series Switches
Technical Services
Cisco SMARTnet Service
● Around-the-clock, global access to the Cisco TAC
● Unrestricted access to the extensive Cisco.com knowledge base and tools
● Next-business-day, 8x5x4, 24x7x4, or 24x7x2 advance hardware replacement and onsite parts replacement and installation available1
● Ongoing operating system software updates within the licensed feature set2
● Proactive diagnostics and real-time alerts on Smart Call Home enabled devices
Cisco Smart Foundation Service
● Next-business-day advance hardware replacement as available
● Access to SMB TAC during business hours (access levels vary by region)
● Access to Cisco.com SMB knowledge base
● Online technical resources through Smart Foundation Portal
● Operating system software bug fixes and patches
Cisco Smart Care Service
● Network-level coverage for the needs of small and medium-sized businesses
● Proactive health checks and periodic assessments of Cisco network foundation, voice, and security technologies
● Technical support for eligible Cisco hardware and software through Smart Care Portal
● Cisco operating system and application software updates and upgrades2
● Next-business-day advance hardware replacement as available, 24x7x4 option available1
Cisco SP Base Service
● Around-the-clock, global access to the Cisco TAC
● Registered access to Cisco.com
● Next-business-day, 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement. Return to factory option available1
● Ongoing operating system software updates2
Cisco Focused Technical Support Services
Three levels of premium, high-touch services are available:
● Cisco High-Touch Operations Management Service
● Cisco High-Touch Technical Support Service
● Cisco High-Touch Engineering Service
Valid Cisco SMARTnet or SP Base contracts are required on all network equipment
1
Advance hardware replacement is available in various service-level combinations. For example, 8x5xNBD indicates that
shipment will be initiated during the standard 8-hour business day, 5 days a week (the generally accepted business days within
the relevant region), with next-business-day (NBD) delivery. Where NBD is not available, same day shipping is provided.
Restrictions apply; please review the appropriate service descriptions for details.
2
Cisco operating system updates include the following: maintenance releases, minor updates, and major updates within the
licensed feature set.
Ordering Information
Table 23.
Cisco Catalyst 2960-X Series Switches Ordering Information
Part Number
10/100/1000
Ethernet Interfaces
Uplink Interfaces
Cisco IOS Software Available PoE
Feature Set
Power
FlexStack-Plus
Stacking
WS-C2960X-48FPD-L
48
2 SFP+
LAN Base
740W
Optional
WS-C2960X-48LPD-L
48
2 SFP+
LAN Base
370W
Optional
WS-C2960X-24PD-L
24
2 SFP+
LAN Base
370W
Optional
WS-C2960X-48TD-L
48
2 SFP+
LAN Base
-
Optional
WS-C2960X-24TD-L
24
2 SFP+
LAN Base
-
Optional
WS-C2960X-48FPS-L
48
4 SFP
LAN Base
740W
Optional
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 23 of 26
Part Number
10/100/1000
Ethernet Interfaces
Uplink Interfaces
Cisco IOS Software Available PoE
Feature Set
Power
FlexStack-Plus
Stacking
WS-C2960X-48LPS-L
48
4 SFP
LAN Base
370W
Optional
WS-C2960X-24PS-L
24
4 SFP
LAN Base
370W
Optional
WS-C2960X-24PSQ-L
24
2 SFP,
2 10/100/1000BT
LAN Base
110W
No
WS-C2960X-48TS-L
48
4 SFP
LAN Base
-
Optional
WS-C2960X-24TS-L
24
4 SFP
LAN Base
-
Optional
WS-C2960X-48TS-LL
48
2 SFP
LAN Lite
-
No
WS-C2960X-24TS-LL
24
2 SFP
LAN Lite
-
No
Table 24.
Cisco Catalyst 2960-XR Configurations Ordering Information
Part Number
10/100/1000
Ethernet
Interfaces
Uplink
Interfaces
Cisco IOS
Software
Feature Set
Available PoE
Power
Second FRU
Power Supply
Option
FlexStack-Plus
Stacking
WS-C2960XR-48FPD-I
48
2 SFP+
IP Lite
740W
1025W
Optional
WS-C2960XR-48LPD-I
48
2 SFP+
IP Lite
370W
640W
Optional
WS-C2960XR-24PD-I
24
2 SFP+
IP Lite
370W
640W
Optional
WS-C2960XR-48TD-I
48
2 SFP+
IP Lite
-
250W
Optional
WS-C2960XR-24TD-I
24
2 SFP+
IP Lite
-
250W
Optional
WS-C2960XR-48FPS-I
48
4 SFP
IP Lite
740W
1025W
Optional
WS-C2960XR-48LPS-I
48
4 SFP
IP Lite
370W
640W
Optional
WS-C2960XR-24PS-I
24
4 SFP
IP Lite
370W
640W
Optional
WS-C2960XR-48TS-I
48
4 SFP
IP Lite
-
250W
Optional
WS-C2960XR-24TS-I
24
4 SFP
IP Lite
-
250W
Optional
Table 25.
Cisco Catalyst 2960-X Accessories
Part Numbers
Description
C2960X-STACK
FlexStack-Plus hot-swappable stacking module
CAB-STK-E-0.5M
FlexStack-Plus stacking cable with a 0.5 m length
CAB-STK-E-1M
FlexStack-Plus stacking cable with a 1.0 m length
CAB-STK-E-3M
FlexStack-Plus stacking cable with a 3.0 m length
CAB-CONSOLE-RJ45
Console cable 6 feet with RJ45
CAB-CONSOLE-USB
Console cable 6 feet with USB Type A and mini-B connectors
PWR-CLP
Power cable restraining clip
RCKMNT-1RU-2KX=
Spare rack-mount kit for Cisco Catalyst 2960-X and 2960-XR Series for 19-inch racks
RCKMNT-REC-2KX=
1 RU recessed rack-mount kit for Cisco Catalyst 2960-X and 2960-XR Series
Table 26.
Cisco Catalyst 2960-X Redundant Power Supply Options
Part Numbers
Description
PWR-RPS2300
Cisco Redundant Power System 2300 and blower, no power supply
BLNK-RPS2300=
Spare bay insert for Cisco Redundant Power System 2300 for Cisco Catalyst 2960 and Cisco Catalyst 2960-X
switches
CAB-RPS2300-E=
Spare RPS2300 cable for Cisco Catalyst 2960-X switches
BLWR-RPS2300=
Spare 45 CFM blower for RPS 2300
C3K-PWR-750WAC=
RPS 2300 750W AC power supply spare for Cisco Catalyst 2960-X
.
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 24 of 26
Table 27.
Cisco Catalyst 2960-XR Power Supply Options
Part Numbers
Description
PWR-C2-250WAC4
Second FRU power supply and fan for all non-PoE 2960-XR switches, provides 250W AC of power
PWR-C2-640WAC
Second FRU power supply and fan for all 370W PoE+ 2960-XR switches, provides 640W AC of power
PWR-C2-1025WAC4
Second FRU power supply and fan for all 740W PoE+ 2960-XR switches, provides 1025W AC of power
PWR-C2-250WAC=
Spare FRU power supply and fan for all non-PoE 2960-XR switches, provides 250W AC of power
PWR-C2-640WAC=
Spare FRU power supply and fan for all 370W PoE+ 2960-XR switches, provides 640W AC of power
PWR-C2-1025WAC=
Spare FRU power supply and fan for all 740W PoE+ 2960-XR switches, provides 1025W AC of power
4
Table 28.
Cisco Catalyst 2960-X and 2960-XR SFP/SFP+ Modules
SFP and SFP+ Modules
For the list of supported SFP and SFP+ modules, visit
http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html.
Table 29.
Power Cords for Cisco Catalyst 2960-X Product Family
Part Numbers
Description
CAB-16AWG-AC
AC power cord, 16AWG
CAB-ACE
AC power cord (Europe), C13, CEE 7, 1.5M
CAB-L620P-C13-US
Power cord, 250VAC, 15A, NEMA L6-20 to C13, US
CAB-ACI
AC power cord (Italy), C13, CEI 23-16, 2.5m
CAB-ACU
AC power cord (UK), C13, BS 1363, 2.5m
CAB-ACA
AC power cord (China/Australia), C13, AS 3112, 2.5m
CAB-ACS
AC power cord (Switzerland), C13, IEC 60884-1, 2.5m
CAB-ACR
AC power cord (Argentina), C13, EL 219 (IRAM 2073), 2.5m
CAB-ACC
CORD, PWR, CHINA, 10A, IEC 320, C13 (APN=CS-PWR-CH)
CAB-JPN-12A
CABASY, POWER CORD, JAPAN 2P, PSE, 12A @125VAC
CAB-L620P-C13-JPN
Power cord, 250VAC, 15A, NEMA L6-20 to C13, JAPAN
CAB-IND
Power cable for India
CAB-C15-ISR
Power cable for Israel
CAB-ACSA
Power cable for South Africa
CAB-AC15A-90L-US
15A AC power cord, left angle (United States)
CAB-ACE-RA
Power cord Europe, right angle
CAB-ACI-RA
Power cord Italian, right angle
CAB-ACU-RA
Power cord UK, right angle
CAB-ACC-RA
Power cord China, right angle
CAB-ACA-RA
Power cord, Australian, right angle
CAB-ACS-RA
Power cord for Switzerland, right angle
CAB-ACR-RA
Power cord, Argentina, right angle
CAB-JPN-RA
Power cord, Japan, right angle
CAB-C15-CBN
Cabinet jumper power cord, 250 VAC 13A, C14-C15 connectors
CAB-ACBZ-12A
AC power cord (Brazil) 12A/125V BR-3-20 plug for less than 12A device
4
The first FRU power supply and fan module is configured automatically when the switch is ordered. The second redundant FRU
power supply and fan module is an option while configuring the order.
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 25 of 26
Table 30.
Power Cords for Cisco Catalyst 2960-XR Product Family
Part Numbers
Description
CAB-TA-NA=
AC power cord for Cisco Catalyst 2960XR (North America)
CAB-TA-AP=
AC power cord for Cisco Catalyst 2960XR (Australia)
CAB-TA-AR=
AC power cord for Cisco Catalyst 2960XR (Argentina)
CAB-TA-SW=
AC power cord for Cisco Catalyst 2960XR (Switzerland)
CAB-TA-UK=
AC power cord for Cisco Catalyst 2960XR (United Kingdom)
CAB-TA-JP=
AC power cord for Cisco Catalyst 2960XR (Japan)
CAB-TA-250V-JP=
Japan 250VAC power cord for Cisco Catalyst 2960XR (Japan)
CAB-TA-EU=
AC power cord for Cisco Catalyst 2960XR (Europe)
CAB-TA-IT=
AC power cord for Cisco Catalyst 2960XR (Italy)
CAB-TA-IN=
AC power cord for Cisco Catalyst 2960XR (India)
CAB-TA-CN=
AC power cord for Cisco Catalyst 2960XR (China)
CAB-TA-DN=
AC power cord for Cisco Catalyst 2960XR (Denmark)
CAB-TA-IS=
AC power cord for Cisco Catalyst 2960XR (Israel)
CAB-C15-CBN=
Cabinet jumper power cord, 250 VAC 13A, C14-C15 connectors
CAB-C15-CBN-JP=
Japan Cabinet Jumper Power Cord, 250 VAC 13A, C14-C15
CAB-TA-JP-RA=
Japan AC Right Angled Power Cord for Cisco Catalyst 2960XR
For more information about Cisco products, contact:
Provided by: Mega Hertz 800-883-8839 info@go2mhz.com www.go2mhz.com
Printed in USA
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-728232-04
08/14
Page 26 of 26
Download PDF
Similar pages