Ergohuman ME8ERGLO Chair Info Sheet

ergohuman
All of our Ergo chairs were engineered with your total comfort in mind.
Aesthetics, form and function are merged seamlessly in a single design,
allowing Ergo chairs to be minutely adjusted to achieve unrivaled support.
A synchro-tilt mechanism with infinite lock, sliding seat, pneumatic height
adjustment, and headrest, are standard on all Ergo models. Add a choice
of mesh, leather, or a selection from our Fabrix catalog, and you can build
features
Tilt Tension Control
Recline rate adapts to weight of user.
Tilt Lock
Locks out tilt function.
the perfect Ergo chair for you.
Back Angle Adjustment
Sets back angle for personalized comfort in reclined
position.
specifications
Synchro-Tilt
Back reclines in a preset ratio to seat.
Overall Dimensions
26.5" x 29" x 46-52"
(W x D x H)
Seat Height
18.1" (at lowest point)
22.9" (at highest point)
Seat
20.5" x 18.5" (W x D)
Weight
66 lbs
Back
20.5" x 28" (W x H)
Cube
10.8
Seat Height Adjustment
Sets seat height to desired position relative to floor.
Waterfall Seat
Front of cushion slopes to reduce pressure on the
back of the knees.
Back Height Adjustment
Raise or lower to support the lumbar (lower back)
region.
Seat Depth Adjustment
Adjusts seat depth relative to back.
Arm Height Adjustment
Adjusts arm up or down for proper ergonomic
positioning while seated.
Swivel Arm
Arm pads angle in or out for proper ergonomic
positioning.
high-back
ME7ERG
$
Arm Depth Adjustment
Arm pads slide forward or backward for proper
ergonomic positioning.
Single Lever Adjustment
Adjustable Headrest
1,248
standard colors
blue mesh
KM15
grey mesh
W09-53
green mesh plum red
KM14
mesh KM12
orange/
copper
mesh KM13
black mesh
W09-1
©2015 Raynor Group. All Rights Reserved.
ergohuman
All of our Ergo chairs were engineered with your total comfort in mind.
Aesthetics, form and function are merged seamlessly in a single design,
allowing Ergo chairs to be minutely adjusted to achieve unrivaled support.
A synchro-tilt mechanism with infinite lock, sliding seat, pneumatic height
adjustment, and headrest, are standard on all Ergo models. Add a choice
of mesh, leather, or a selection from our Fabrix catalog, and you can build
features
Tilt Tension Control
Recline rate adapts to weight of user.
Tilt Lock
Locks out tilt function.
the perfect Ergo chair for you.
Back Angle Adjustment
Sets back angle for personalized comfort in reclined
position.
specifications
Synchro-Tilt
Back reclines in a preset ratio to seat.
Overall Dimensions
26.5" x 29" x 46-52"
(W x D x H)
Seat Height
18.1" (at lowest point)
22.9" (at highest point)
Seat
20.5" x 18.5" (W x D)
Weight
66 lbs
Back
20.5" x 28" (W x H)
Cube
10.8
Seat Height Adjustment
Sets seat height to desired position relative to floor.
Waterfall Seat
Front of cushion slopes to reduce pressure on the
back of the knees.
Back Height Adjustment
Raise or lower to support the lumbar (lower back)
region.
standard colors
Seat Depth Adjustment
Adjusts seat depth relative to back.
Arm Height Adjustment
Adjusts arm up or down for proper ergonomic
positioning while seated.
black mesh W09-1
Swivel Arm
Arm pads angle in or out for proper ergonomic
positioning.
Arm Depth Adjustment
Arm pads slide forward or backward for proper
ergonomic positioning.
high-back
CAL133
Single Lever Adjustment
Adjustable Headrest
CAME7ERG
$
1,315
tilt tension control
The tilt tension knob allows for easy adjustment
of back recline resistance. Back angle can be
locked in five positions (four different positions
of recline or upright).
©2015 Raynor Group. All Rights Reserved.
ergohuman
All of our Ergo chairs were engineered with your total comfort in mind.
Aesthetics, form and function are merged seamlessly in a single design,
allowing Ergo chairs to be minutely adjusted to achieve unrivaled support.
A synchro-tilt mechanism with infinite lock, sliding seat, pneumatic height
adjustment, and headrest, are standard on all Ergo models. Add a choice
of mesh, leather, or a selection from our Fabrix catalog, and you can build
features
Tilt Tension Control
Recline rate adapts to weight of user.
Tilt Lock
Locks out tilt function.
the perfect Ergo chair for you.
Back Angle Adjustment
Sets back angle for personalized comfort in reclined
position.
specifications
Synchro-Tilt
Back reclines in a preset ratio to seat.
Overall Dimensions
26.5" x 29" x 39.5-45.5"
(W x D x H)
Seat Height
18.1" (at lowest point)
22.9" (at highest point)
Seat
20.5" x 18.5" (W x D)
Weight
64 lbs
Back
20.5" x 22" (W x H)
Cube
9.2
Seat Height Adjustment
Sets seat height to desired position relative to floor.
Waterfall Seat
Front of cushion slopes to reduce pressure on the
back of the knees.
Back Height Adjustment
Raise or lower to support the lumbar (lower back)
region.
Seat Depth Adjustment
Adjusts seat depth relative to back.
Arm Height Adjustment
Adjusts arm up or down for proper ergonomic
positioning while seated.
Swivel Arm
Arm pads angle in or out for proper ergonomic
positioning.
mid-back
Arm Depth Adjustment
Arm pads slide forward or backward for proper
ergonomic positioning.
Single Lever Adjustment
ME8ERGLO
$
1,221
standard colors
blue mesh
KM15
grey mesh
W09-53
green mesh plum red
KM14
mesh KM12
orange/
copper
mesh KM13
black mesh
W09-1
©2015 Raynor Group. All Rights Reserved.
ergohuman
All of our Ergo chairs were engineered with your total comfort in mind.
Aesthetics, form and function are merged seamlessly in a single design,
allowing Ergo chairs to be minutely adjusted to achieve unrivaled support.
A synchro-tilt mechanism with infinite lock, sliding seat, pneumatic height
adjustment, and headrest, are standard on all Ergo models. Add a choice
of mesh, leather, or a selection from our Fabrix catalog, and you can build
features
Tilt Tension Control
Recline rate adapts to weight of user.
Tilt Lock
Locks out tilt function.
the perfect Ergo chair for you.
Back Angle Adjustment
Sets back angle for personalized comfort in reclined
position.
specifications
Synchro-Tilt
Back reclines in a preset ratio to seat.
Overall Dimensions
26.5" x 29" x 39.5-45.5"
(W x D x H)
Seat Height
18.1" (at lowest point)
22.9" (at highest point)
Seat
20.5" x 18.5" (W x D)
Weight
64 lbs
Back
20.5" x 22" (W x H)
Cube
9.2
Seat Height Adjustment
Sets seat height to desired position relative to floor.
Waterfall Seat
Front of cushion slopes to reduce pressure on the
back of the knees.
Back Height Adjustment
Raise or lower to support the lumbar (lower back)
region.
standard colors
Seat Depth Adjustment
Adjusts seat depth relative to back.
Arm Height Adjustment
Adjusts arm up or down for proper ergonomic
positioning while seated.
black mesh W09-1
Swivel Arm
Arm pads angle in or out for proper ergonomic
positioning.
mid-back
CAL133
Arm Depth Adjustment
Arm pads slide forward or backward for proper
ergonomic positioning.
Single Lever Adjustment
CAME8ERGLO
$
1,290
tilt tension control
The tilt tension knob allows for easy adjustment
of back recline resistance. Back angle can be
locked in five positions (four different positions
of recline or upright).
©2015 Raynor Group. All Rights Reserved.
Download PDF
Similar pages