nr 214551 QM/UM
ISO 9001
ISO 14001
nr 214551 OH PL
PN-N-18001
Index: WMPLMPI505
MULTI-FUNCTION ELECTRICAL
INSTALLATIONS METER
MPI-505
! Measurement of short-circuit loop parameters:
- in L-PE, L-N, L-L circuits as well as in L-PE (RCD) circuits - without tripping RCD breakers of current ≥ 30 mA.
- impedance measurement of short-circuit loops in power networks of nominal voltages: 115/200 V, 220/380 V, 230/400 V, 240/415
V and frequencies in the range of 45…65 Hz..
! Testing of AC and A types residual current circuit breakers:
- testing of regular and selective residual current circuit breakers of nominal differential currents: 10 mA, 30 mA, 100 mA, 300 mA,
500 mA, 1000 mA,
- IA trip current measurement,
- tA trip time measurement for 0.5IΔn, IΔn, 2IΔn, 5IΔn,
- measurement of earth continuity and touch voltage without tripping RCDs,
- functionality of automatic measurement of residual current circuit breaker parameters.
Sonel S.A.
ul. Wokulskiego 11
58-100 Świdnica
tel. +48 74 85 83 878
fax +48 74 85 83 808
dh@sonel.pl
www.sonel.pl
! Measurement of insulation resistance at voltages: 100 V, 250 V, 500 V and 1000 V.
! Low-voltage measurement of resistance, protective connections and equipotential bonding:
- measurement of continuity of protective connections with current ±200 mA,
- automatic calibration of test leads - capability of using any test leads,
- measurement of resistance with low current and acoustic signaling.
! Quick verification of correctness of the PE wire connection with a touch probe.
! Measurement of AC voltage.
! Indication of phase sequence.
! Memory of 990 measurements, data transfer to a PC over the USB interface.
MPI-505
Measurement range acc. to IEC 61557: 0.13...1999Ω for a 1.2 m test lead:
Intrinsic error
Resolution
0.00...19.99Ω
0.01Ω
20.0...199.9Ω
0.1Ω
200...1999Ω
1Ω
ISO 9001
ISO 14001
nr 214551 OH PL
PN-N-18001
Low-voltage measurement of circuit continuity and resistance
Measurement of short-circuit loop impedance ZL-PE, ZL-N, ZL-L
Display
range
nr 214551 QM/UM
±(5% w.m. + 3 digits)
• Nominal operating voltage UnL-N/ UnL-L: 115/200V, 220/380V, 230/400V, 240/415V
• Operating voltage range: 100…264V (for ZL-PE i ZL-N) and 100…440V (for ZL-L)
• Nominal power network frequency fn: 50Hz, 60Hz
• Operating frequency range: 45…65Hz
• Maximal measurement current: 23A at 230V (10ms), 40A at 400V (10ms),
• Verification of correctness of the PE terminal connection with a touch (for ZL-PE)
Measurement of short-circuit loop impedance ZL-PE in the RCD mode
Measurement range acc. to IEC 61557: 0.5...1999Ω for a 1.2 m test lead
Measurement of protective conductor continuity with current ±200 mA
Measurement range acc. to IEC 61557-4: 0.12...400Ω
Range
Resolution
0.00...19.99Ω
0.01Ω
20.0...199.9Ω
0.1Ω
200...400Ω
1Ω
Intrinsic error
±(2% w.m. + 3 digits)
• Voltage on open terminals: 4…9V
• Output current at R<2Ω: min. 200mA
• Compensation of test lead resistance
• Measurements for both polarities of current
Measurement of resistance with low current
Range
Resolution
0.00...199.9Ω
0.1Ω
200...1999Ω
1Ω
Intrinsic error
±(3% w.m. + 3 digits)
Display
range
Resolution
Intrinsic error
0.00...19.99Ω
0.01Ω
±(6% w.m. + 10 digits)
• Voltage on open terminals: 4…9V, short-circuit current ISC:7mA
• Acoustic signal for a measured resistance value <30Ω + 50%
• Compensation of test lead resistance
20.0...199.9Ω
0.1Ω
200...1999Ω
1Ω
±(6% w.m. + 5 digits)
Measurement of insulation resistance
• Does not trip RCD breakers of RCD current IΔn ≥ 30mA
• Nominal operating voltage Un: 115V, 220V, 230V, 240V
• Operating voltage range: 100…264V
• Nominal power network frequency fn: 50Hz, 60Hz
• Operating frequency range: 45…65Hz
• Verification of correctness of the PE terminal connection with a touch probe
Measurements of RCD breaker parameters (operating voltage range 100…264 V):
RCD tripping test and measurement of tA trip time (for the tA measurement function)
RCD type
Multiplicity
Range
Resolution
Intrinsic error
0...300ms
General
0...150ms
0...40ms
1ms
±(2% w.m. + 2 digits)*
0...500ms
Selective
0...150ms
Measurement of IA RCD trip current for sinusoidal differential current:
Measurement
Resolution
range
10mA
3.3...10.0mA
30mA
9.0...30.0mA
100mA
33...100mA
300mA
90...300mA
500mA
150...500mA
Intrinsic error
0.3 x IDn...1.0 x IDn
± 5% IDn
0.1mA
1mA
Measurement
Resolution
range
10mA
4.0...20.0mA
30mA
12.0...42.0mA
100mA
40...140mA
300mA
120...420mA
500mA
200...700mA
0.1mA
Measurement
current
Intrinsic error
0.35 x IDn ...2.0 x IDn
±10% IDn
1mA
0.35 x IDn ...1.4 x IDn
• Capability of measurement for either positive or negative half-periods of forced leakage
current
• Maximal time of the measurement current flow is 3200 ms
Indication of phase sequence
• Indication of phase sequence: consistent, inconsistent
• Power network UL-L voltage range: 100…440 V
• Displaying inter-phase voltage values
Intrinsic error
Resolution
0...1999kΩ
1kΩ
2.00...19.99MΩ
0.01MΩ
20.0...199.9MΩ
0.1MΩ
200...500MΩ
1MΩ
200...1000MΩ
1MΩ
200..1999MΩ
1MΩ
±(3% w.m. + 8 digits)
±(4% w.m. + 6 digits)
2.00...3.00GΩ
0.01GΩ
*) not exceeding the measurement range for a given voltage.
Standard accessories of the meter:
Measurement
current
330...1000mA
1000mA
• Capability of starting the measurement from either positive or negative half-period of
forced leakage current
Measurement of IA RCD trip current for pulsating unidirectional current:
Nominal
current
Display
range *)
• Measurement voltage: 100 V, 250 V, 500 V and 1000 V
• Detection of presence of voltage before the measurement
• Discharge of the measured object after the measurement
• Measurements of voltage on terminals +RISO, -RISO within the range of: 0…440 V
• Measurement current < 2 mA
0...200ms
* - for IΔn= 10mA and 0.5 IΔn uncertainty is + 2% w.m. + 3 digits
Nominal
current
Measurement range acc. to IEC 61557-2:
• for UN = 100V: 100kΩ...500MΩ
• for UN = 250V: 250kΩ...1GΩ
• for UN = 500V: 500kΩ...2GΩ
• for UN = 1000V: 1MΩ...3GΩ
- WS-01 measurement triggering adapter with a UNI-Schuko plug
- 1.2 m red test lead terminated with banana plugs
- 1.2 m yellow test lead terminated with banana plugs
- 1.2 m blue test lead terminated with banana plugs
- USB data transfer cable
- red test probe with a banana socket
- yellow test probe with a banana socket
- blue test probe with a banana socket
- K02 yellow alligator clip
- K02 red alligator clip
- L4 case
- meter harness
- calibration certificate
- operating instructions
- SONEL CD
- warranty card
- 4 LR6 batteries
WAADAWS01
WAPRZ1X2REBB
WAPRZ1X2YEBB
WAPRZ1X2BUBB
WAPRZUSB
WASONREOGB1
WASONYEOGB1
WASONBUOGB1
WAKROYE20K02
WAKRORE20K02
WAFUTL4
WAPOZSZE2
- 5 m red test lead terminated with a banana plug
- 10 m red test lead terminated with a banana plug
- 20 m red test lead terminated with a banana plug
- WS-05 adapter with a UNI-Schuko plug
- AGT-16C adapter for 4-contact 3-phase sockets
- AGT-16P adapter for 5-contact 3-phase sockets
- AGT-16T adapter for industrial sockets
- AGT-32C adapter for 4-contact 3-phase sockets
- AGT-32P adapter for 5-contact 3-phase sockets
- AGT-32T adapter for industrial sockets
- AGT-63P adapter for 5-contact 3-phase sockets
- TWR-1J adapter for testing RCD breakers
- “SONEL Pomiary Elektryczne” program for creating reports
- “SONEL Schematic” prog. for creating drafts, electr. inst. schem.
- “SONEL PE Kalkulacje” program for creating measurement calc.
- official calibration certificate
WAPRZ005REBB
WAPRZ010REBB
WAPRZ020REBB
WAADAWS05
WAADAAGT16C
WAADAAGT16P
WAADAAGT16T
WAADAAGT32C
WAADAAGT32P
WAADAAGT32T
WAADAAGT63P
WAADATWR1J
WAPROSONPE5
WAPROSCHEM
WAPROKALK
Additional accessories of the meter:
The acronym “m.v.” stands for a “measured reference value”.
v.4
Download PDF
Similar pages