FH-S700BS FH-S701BS FH-S500BT FH-S501BT

English
CD RDS RECEIVER
AUTORADIO CD RDS
REPRODUCTOR DE CD CON RECEPTOR RDS
Français
Owner’s Manual
Mode d’emploi
Manual de instrucciones
Important (Serial number)
The serial number is located on the bottom of this unit. For your own security and convenience, be sure to
record this number on the enclosed warranty card.
Important (Numéro de série)
Le numéro de série se trouve au bas de cet appareil. Pour votre sécurité et votre commodité, veillez à noter ce
numéro sur la carte de garantie fournie.
Importante (Número de serie)
El número de serie se encuentra en la parte inferior de esta unidad. Por su propia seguridad y comodidad,
asegúrese de anotar este número en la tarjeta de garantía que se adjunta.
Español
FH-S700BS
FH-S701BS
FH-S500BT
FH-S501BT
Table of Contents
Before You Start ....................................................................................... 4
Getting Started ........................................................................................ 6
CD/USB/iPhone/AUX............................................................................ 14
Bluetooth ............................................................................................... 16
App Mode .............................................................................................. 21
Pandora® ................................................................................................ 23
Spotify® .................................................................................................. 24
SiriusXM Satellite Radio ...................................................................... 26
Using Pioneer ARC APP ....................................................................... 30
Audio Adjustments .............................................................................. 31
Settings .................................................................................................. 33
FUNCTION settings ............................................................................... 33
AUDIO settings ...................................................................................... 36
SYSTEM settings .................................................................................... 38
ILLUMINATION settings........................................................................ 42
MIXTRAX settings.................................................................................. 43
Connections/Installation .................................................................... 45
Additional Information ....................................................................... 51
About this manual:
• In the following instructions, a USB memory or USB audio player are referred to as
“USB device”.
-2-
English
Radio ....................................................................................................... 13
• When an iPhone is connected to the unit, the source name on the unit appears as
[iPod]. Please note that this unit supports only iPhones (iPhone 5 or later) regardless of
the source name (for details, refer to page 58).
English
-3-
Before You Start
FCC ID: EW4C95
MODEL NO.: FH-S700BS/FH-S701BS/FH-S500BT/FH-S501BT
IC: 4250A-C95
This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of this device.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
The Bluetooth antenna cannot be removed (or replaced) by user.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC
radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed
to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should
be installed and operated keeping the radiator at least 20cm or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
Alteration or modifications carried out without appropriate authorization may invalidate the user’s
right to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
–Consult the dealer or an experienced radio/TV technician for help.
The Safety of Your Ears is in Your Hands
Get the most out of your equipment by playing it at a safe level—a level that lets the sound come
through clearly without annoying blaring or distortion and, most importantly, without affecting your
sensitive hearing. Sound can be deceiving.
-4-
English
Thank you for purchasing this PIONEER product
To ensure proper use, please read through this manual before using this product. It is especially
important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the
manual in a safe and accessible place for future reference.
WARNING
• Do not attempt to install or service this product by yourself. Installation or servicing of this
product by persons without training and experience in electronic equipment and automotive
accessories may be dangerous and could expose you to the risk of electric shock, injury or other
hazards.
• Do not attempt to operate the unit while driving. Make sure to pull off the road and park your vehicle
in a safe location before attempting to use the controls on the device.
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
CAUTION
• Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result.
Also, damage to this unit, smoke, and overheating could result from contact with liquids.
• Always keep the volume low enough to hear outside sounds.
• This product is evaluated in moderate and tropical climate condition under the Audio, video and
similar electronic apparatus - Safety requirements, IEC 60065.
CAUTION
This product is a class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007.
After-sales service for Pioneer products
Please contact the dealer, distributor from where you purchased this unit or the authorized PIONEER
Service Station for after-sales service or any other information. In case the necessary information is not
available, please contact the companies listed below:
Please do not ship your unit to the companies at the addresses listed below for repair without
contacting them in advance.
-5-
English
Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal”
can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a
safe level BEFORE your hearing adapts.
ESTABLISH A SAFE LEVEL:
• Set your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
• Once you have established a comfortable sound level, set the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
• Do not turn up the volume so high that you can’t hear what’s around you.
• Use caution or temporarily discontinue use in potentially hazardous situations.
• Do not use headphones while operating a motorized vehicle; the use of headphones may create a
traffic hazard and is illegal in many areas.
U.S.A. and CANADA
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760
800-421-1404
Getting Started
Basic operation
FH-S700BS/S701BS
DISP (display)
Disc loading slot
Display window
BAND/
SRC (source)/OFF
(eject)
USB port
AUX input jack (3.5 mm stereo jack)
M.C. (multi-control) dial
-6-
English
For warranty information please see the Limited Warranty sheet included with this unit.
FH-S500BT/S501BT
Disc loading slot
Display window
DISP (display)
(eject)
USB port
English
AUX input jack (3.5 mm stereo jack)
BAND/
SRC (source)/OFF
M.C. (multi-control) dial
Remote Control
VOLUME +/–
MUTE
/
SRC (source)
DISP (display)
Frequently used operations
The available buttons vary depending on the unit.
-7-
Operation
Purpose
Head Unit
Remote Control
Press SRC/OFF to turn on
the power.
Press and hold SRC/OFF to
turn off the power.
Press SRC to turn on the
power.
Press and hold SRC to turn
off the power.
Adjust the volume
Turn the M.C. dial.
Press VOLUME + or –.
Press MUTE to mute the
unit. Press MUTE again or
press VOLUME + or – to
unmute.
Select a source
Press SRC/OFF repeatedly.
Press SRC repeatedly.
Change the display
information
Press DISP repeatedly.
Press DISP repeatedly.
Return to the previous
display/list
Press BAND/
Press / to select the
next/previous folder.
.
Return to the normal display Press and hold BAND/
from the menu
.
Change the display
Press and hold BAND/
brightness (not available
when [SIRIUSXM] is selected
as a source)
.
–
–
Answering a call
Press
.
Press
.
Ending a call
Press
.
Press
.
* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal,
the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the
source off.
Display indication
The indication varies depending on the unit.
Indication
Description
Appears when a lower tier of the menu or folder exists.
Appears when a Bluetooth telephone is connected to this unit by HFP
(Hands Free Profile) (page 16) and flashes while the telephone is on hold.
Appears when a Bluetooth audio player is connected to this unit by A2DP
(Advanced Audio Distribution Profile) (page 16).
Appears when the
button is pressed.
Appears when the sound retriever function is set (page 34).
-8-
English
Turn on the power*
Indication
Description
BASS
Appears when [HI]/[LOW] is selected in [D.BASS] (page 38).
Appears when random/shuffle play is set (except when BT AUDIO is
selected as the source).
Appears when a Bluetooth connection is made (page 16).
Resetting the microprocessor
The microprocessor must be reset in the following situations:
– Before using this unit for the first time after installation
– If the unit fails to operate properly
– When strange or incorrect messages appear on the display
1
Press the RESET button with a pen tip or other pointed instrument.
RESET button
Preparing the remote control
Remove the insulation sheet before use.
-9-
English
Appears when repeat play is set (except when BT AUDIO is selected as the
source).
How to replace the battery
English
Insert the CR2025 (3 V) battery with the plus (+) and
minus (–) poles orientated properly.
WARNING
• Do not ingest the battery, Chemical Burn Hazard.
(The remote control supplied with) This product contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to
death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from
children.
If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
• Do not expose the battery or remote control to excessive heat such as direct sunlight or fire.
CAUTION
• There is a potential danger of explosion if the battery is incorrectly replaced. When replacing the
battery, replace it with the same type.
• Do not handle or store the battery with metallic tools or objects.
• If the battery leaks, remove the battery and wipe the remote control completely clean. Then install a
new battery.
• When disposing of used batteries, please comply with governmental regulations or environmental
public institutions’ rules that apply in your country/area.
• “Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California, U.S.A.)”
Important
• Do not store the remote control in high temperatures or direct sunlight.
• Do not let the remote control fall onto the floor, where it may become jammed under the brake or
accelerator pedal.
Setup menu
When you turn the ignition switch to ON after installation, the setup menu appears in
the display.
- 10 -
WARNING
(Only for FH-S700BS/S701BS)
Do not use the unit in standard mode when a speaker system for network mode is connected to the
unit. Do not use the unit in network mode when a speaker system for standard mode is connected to
the unit. This may cause damage to the speakers.
Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Menu Item
Description
LANGUAGE
Select the language to display the text information from a
compressed audio file.
[ENG](English),
[ESP](Spanish),
[FRA] (Canadian
French)
CLOCK SET
Set the clock.
1 Turn the M.C. dial to adjust the hour, then press to confirm.
The indicator moves to the minute setting automatically.
2 Turn the M.C. dial to adjust the minute, then press to confirm.
SPEAKER MODE (Only Switch between two operation modes: the 2-way network mode
for FH-S700BS/S701BS) (NETWORK) and the standard mode (STANDARD) according to
the connections you have established. For details on operation
[STANDARD],
modes, see page 32.
[NETWORK]
After selecting the appropriate mode, turn the M.C. dial to
select [YES], then press to confirm.
• You cannot complete the setup menu without setting the
[SPEAKER MODE].
• Once the speaker mode is set, this setting cannot be changed
unless the default settings of this product are restored. Restore
the default settings to change the speaker mode setting (refer
to SYSTEM RESET on page 13).
• When [NETWORK] is selected, the beep tone function is not
available.
2
3
[QUIT :YES] appears when all the settings have been made.
To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO],
then press to confirm.
Press the M.C. dial to confirm the settings.
NOTE
These settings other than [SPEAKER MODE] can be made at any time from the SYSTEM settings
(page 38).
- 11 -
English
1
Canceling the demonstration display (DEMO OFF)
Press the M.C. dial to display the main menu.
Turn the M.C. dial to select [SYSTEM], then press to confirm.
Turn the M.C. dial to select [DEMO OFF], then press to confirm.
Turn the M.C. dial to select [YES], then press to confirm.
INITIAL settings
1
2
3
4
Press and hold SRC/OFF until the unit turns off.
Press the M.C. dial to display the main menu.
Turn the M.C. dial to select [INITIAL], then press to confirm.
Turn the M.C. dial to select an option, then press to confirm.
NOTE
The options vary depending on the unit.
Menu Item
Description
REAR-SP
Select when there is a full-range speaker connected to the rear
speaker output leads.
[FUL]
[SW]
Select when there is a subwoofer connected directly to the rear
speaker output leads without any auxiliary amplifier.
SP-P/O MODE
Select when there is a full-range speaker connected to the rear
speaker output leads and there is a subwoofer connected to the
RCA output.
[REAR/SUB.W]
[SUB.W/SUB.W]
Select when there is a passive subwoofer connected directly to
the rear speaker output leads and there is a subwoofer
connected to the RCA output.
[REAR/REAR]
Select when there are full-range speakers connected to the rear
speaker output leads and RCA output. If there is a full-range
speaker connected to the rear speaker output leads, and the
RCA output is not used, you may select either [REAR/SUB.W] or
[REAR/REAR].
SYSTEM UPDATE
Select [SYSTEM INFO] to confirm the latest system information
[SYSTEM INFO], [S/ on the unit.
Select [S/W UPDATE] to update the unit to the latest software
W UPDATE]
and initialize the unit settings. For details on the latest software
and updating, visit our website.
- 12 -
English
1
2
3
4
Menu Item
Description
SXM RESET
Select to initialize the SiriusXM settings.
[YES], [NO]
SYSTEM RESET
[YES], [NO]
Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
English
Radio
The tuner frequencies on this unit are allocated for use in North America. Use in other
areas may result in poor reception.
Receiving preset stations
1
2
3
Press SRC/OFF to select [RADIO].
Press BAND/
to select the band from [FM1], [FM2], [FM3] or [AM].
Press a number button (1/
to 6/
).
NOTE
You can select a preset channel by pressing
and turning the M.C. dial.
TIP
The
/
buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the
FUNCTION settings (page 34).
Best stations memory (BSM)
The six strongest stations are stored on the number buttons (1/
1
2
3
to 6/
).
After selecting the band, press the M.C. dial to display the main menu.
Turn the M.C. dial to select [FUNCTION], then press to confirm.
Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1 After selecting the band, press
/
to select a station.
Press and hold
/
then release to seek an available station. Scanning stops
when the unit receives a station. To cancel seek tuning, press
/
.
- 13 -
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 34).
To store stations manually
1 While receiving the station you want to store, press and hold one of the number
to 6/
) until it stops flashing.
You can select a preset channel by pressing
and turning the M.C. dial. After selecting a channel,
press and hold the M.C. dial to store a station.
CD/USB/iPhone/AUX
Playing back
Disconnect headphones from the device before connecting it to the unit.
CD
1 Insert a disc into the disc loading slot with the label side up.
To eject a disc, stop playback first then press
.
USB devices (including Android™)/iPhone
1 Open the USB port cover.
2 Plug in the USB device/iPhone using an appropriate cable.
NOTE
To automatically switch to [USB] source when a USB device/iPhone is connected to the unit, set [USB
AUTO] to [ON] in the SYSTEM settings (page 40).
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected
directly to the unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
AOA connections
For details on AOA connection, see page 30.
- 14 -
English
buttons (1/
NOTE
MTP connection
A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable
supplied with the device. However, depending on the connected device and the numbers of the files in
the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is
not compatible with WAV file formats and FLAC file formats, and cannot be used with the MIXTRAX
function.
NOTE
AUX
1 Insert the stereo mini plug into the AUX input jack.
2 Press SRC/OFF to select [AUX] as the source.
NOTE
If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 39).
Operations
You can make various adjustments in the FUNCTION settings (page 33).
Note that the following operations do not work for an AUX device. To operate an AUX
device, use the device itself.
Purpose
Operation
Select a folder*1
Press 1/
or 2/
Select a track/song (chapter)
Press
or
.
.
Fast forward or reverse*2
Press and hold
Search for a file from a list (CD/USB only)
1 Press
to display the list.
2 Turn the M.C. dial to select the desired
file (folder) name or category, then press
to confirm.
3 Turn the M.C. dial to select the desired
file, then press to confirm.
Playback starts.
or
.
View a list of the files in the selected folder/ Press the M.C. dial when a folder/category
category*1
is selected.
Play a song in the selected folder/
category*1
Press and hold the M.C. dial when a folder/
category is selected.
Repeat play
Press 6/
.
Random/shuffle play
Press 5/
.
Pause/resume playback
Press 4/PAUSE.
- 15 -
English
If you use an MTP connection, [PHONE CONNECT] needs to be set to [USB MTP] in the SYSTEM settings
(page 40).
Purpose
Operation
Return to root folder (CD/USB only)*1
Press and hold 1/
Switch between compressed audio and CD- Press BAND/
DA (CD only)
.
.
About MIXTRAX (USB/iPhone only)
The MIXTRAX function creates a non-stop mix of your music library, accompanied by
illumination effects. For details on MIXTRAX settings, see page 43.
NOTES
•
•
•
•
iPhone needs to be connected with Pioneer ARC APP via USB for using this function (page 30).
This function is not compatible with an Android device connected via MTP.
Depending on the file/song, sound effects may not be available.
Turn the MIXTRAX function off if the illumination effects it produces interfere with driving.
1
Press 3/MIX to turn MIXTRAX on/off.
Bluetooth
Bluetooth connection
Important
If ten or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may not
work properly.
1
2
3
4
5
Turn on the Bluetooth function of the device.
If you make a Bluetooth connection from the device, proceed to step 6.
Press
to display the phone menu.
Turn the M.C. dial to select [BT SETTING], then press to confirm.
Turn the M.C. dial to select [ADD DEVICE], then press to confirm.
The unit starts to search for available devices, then displays them in the device list.
• To cancel searching, press the M.C. dial.
• If the desired device is not in the list, select [RE-SEARCH].
• If there is no device available, [NOT FOUND] appears in the display.
Turn the M.C. dial to select a device from the device list, then press to confirm.
- 16 -
English
*1 Compressed audio files only
*2 When you use the fast forward or reverse function while playing a VBR file, the playback time may
be not correct.
Press and hold the M.C. dial to switch the displayed device information between the
Bluetooth device address and device name.
If you make a Bluetooth connection from the unit, proceed to step 7.
6
7
Select [Pioneer BT Unit] shown in the device display.
NOTES
• [DEVICE FULL] appears if the unit has already been paired with ten other devices. In this case, delete
one of the paired devices. See [DEL DEVICE] in the Bluetooth settings (page 17).
• Depending on the device, the PIN code is required in step 7. In this case, input [0000].
TIP
The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so,
[VISIBLE] in the Bluetooth settings needs to be set to [ON]. For details on Bluetooth device operations,
refer to the operating instructions supplied with the Bluetooth device.
Bluetooth settings
Menu Item
Description
DEVICELIST
Display the list of paired Bluetooth devices. “*” appears on the
device name when the Bluetooth connection is established.
When no device is selected in the device list, this function is not
available.
DEL DEVICE
Delete the device information.
[DELETE YES],
[DELETE NO]
ADD DEVICE
Register a new device.
If ten devices are already paired, this function is not available.
You can check the number of paired devices on the [DEVICELIST]
setting.
A.CONN
Select [ON] to connect to a Bluetooth device automatically.
[ON], [OFF]
VISIBLE
[ON], [OFF]
PIN CODE
Select [ON] so that a Bluetooth device can detect the unit when
the unit is connected via Bluetooth to another device.
Change the PIN code.
1 Press the M.C. dial to display the setting mode.
2 Turn the M.C. dial to select a number.
3 Press the M.C. dial to move the cursor to the next position.
4 After inputting the PIN code, press and hold the M.C. dial.
After inputting the PIN code, pressing the M.C. dial returns you
to the PIN code input display, and you can change the PIN code.
- 17 -
English
Make sure the same 6-digit number appears on this unit and the device, then
select “Yes” on the device.
Description
DEV. INFO
Switch the device information on the display between the
device name and Bluetooth device address.
A.PAIRING
Select [ON] to pair the unit and iPhone or Android device
automatically when an iPhone or Android device is connected
to the unit via USB. (This function may not be available
depending on the version of iOS you are using.)
• When you are using an Android device, this function is
available in the following situations:
[ON], [OFF]
– Your device has Android OS 4.4 or later installed.
– Be sure to turn on the Bluetooth function of the device and confirm
that the device is not connected to the unit via Bluetooth.
– [P.APP AUTO ON] needs to be set to [ON] (page 40).
– Pioneer ARC APP needs to be installed on your Android device and
[PHONE CONNECT] needs to be set to [APP CONTROL] (page 30).
– A confirmation button should be pressed on the caution window
displayed on Pioneer ARC APP after a connection with the Pioneer
ARC APP is made.
Bluetooth telephone
First, make a Bluetooth connection with the Bluetooth telephone (page 16). Up to two
Bluetooth telephones can be connected simultaneously.
Important
• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running
can drain the vehicle’s battery.
• Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
1 Press
to display the phone menu.
2
3
4
When two phones are connected, a phone name appears first then a phone menu
will display. To switch to another phone, press
again.
Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to confirm.
If you select [PHONE BOOK], proceed to step 4.
Turn the M.C. dial to select [MISSED], [DIALED] or [RECEIVED], then press to
confirm.
Turn the M.C. dial to select a name or phone number, then press to confirm.
The phone call starts.
To answer an incoming call
1 Press
when a call is received.
- 18 -
English
Menu Item
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call while one
phone is being used for a call, a message will appear in the display. To answer that incoming call, you
need to end the existing call.
Basic operations
English
Purpose
Operation
End a call
Press
Reject an incoming call
Press and hold
Switch between the current caller
and a caller on hold
Press the M.C. dial.
.
when a call is received.
Cancel a caller on hold
Press and hold
Adjust the volume of the caller’s
voice (When private mode is on,
this function is not available.)
Turn the M.C. dial during the call.
.
Turn the private mode on or off
Press BAND/
during the call.
To preset phone numbers
1 Select a phone number from a phone book or call history.
2 Press and hold one of the number buttons (1/ to 6/ ).
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/
then press the M.C. dial.
to 6/
Voice recognition (Only for iPhone)
This function is only available when an iPhone equipped with voice recognition is
connected to the unit via Bluetooth.
1 Press and hold
to activate the voice recognition mode.
2 Press the M.C. dial and then talk into the microphone to input voice commands.
To exit the voice recognition mode, press BAND/
.
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.
- 19 -
),
Phone menu
Menu Item
Description
RECENTS
Display the missed call history.
[MISSED]
[RECEIVED]
Display the dialed call history.
Display the received call history.
PHONE BOOK
Display the contacts in your phone. Set [VISIBLE] in the
Bluetooth settings to [ON] to browse the contacts via this unit.
PRESET 1-6
Recall the preset phone numbers. You can also recall the preset
phone numbers by pressing one of the number buttons (1/
to 6/
).
A.ANSR*
Select [ON] to answer an incoming call automatically.
[ON], [OFF]
R.TONE
[ON], [OFF]
Select [ON] if the ring tone does not come out from the car
speakers. Depending on the connected phone, this function
may not work.
PB INVT
Invert the order of names in the phone book (name view).
BT SETTING
You can adjust various settings for Bluetooth connections. For
details on Bluetooth settings, see page 17.
* If two phones are connected, this function does not work on incoming calls that are received while
one of the phones is being used for a call.
Bluetooth audio
Important
• Depending on the Bluetooth audio player connected to this unit, the available operations will be
limited to the following two levels:
– A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio player.
– AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback, pause, select
song, etc.
• The sound of the Bluetooth audio player will be muted when the phone is in use.
• When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone
automatically.
• Depending on the type of Bluetooth audio player you have connected to this unit, operation and
information displayed may vary based on availability and functionality.
1
2
3
Make a Bluetooth connection with the Bluetooth audio player.
Press SRC/OFF to select [BT AUDIO] as the source.
Press BAND/
to start playback.
- 20 -
English
[DIALED]
Basic operations
You can make various adjustments in the FUNCTION settings (page 33).
Purpose
Operation
Fast forward or reverse
Press and hold
Select a track
Press
or
Repeat play*
Press 6/
.
Random play*
Press 5/
.
Pause/resume playback
Press 4/PAUSE.
Search for a file from a list
1 Press
to display a list.
2 Turn the M.C. dial to select the desired
folder name, then press to confirm.
3 Turn the M.C. dial to select the desired
file, then press to confirm.
Playback starts.
Switch the Bluetooth device name in the
device list according to the connection
order
Press 1/
.
English
or 2/
or
.
.
* Depending on the connected device, these operations may not be available.
App Mode
You can enjoy listening to an application on an iPhone/Android device via the unit. In
some cases, you can control an application by using the unit.
For details on compatible devices, visit our website.
Important
Use of third party apps may involve or require the provision of personally identifiable information,
whether through the creation of a user account or otherwise, and for certain applications, the provision
of geolocation data.
ALL THIRD PARTY APPS ARE THE SOLE RESPONSIBILITY OF THE PROVIDERS, INCLUDING WITHOUT
LIMITATION COLLECTION AND SECURITY OF USER DATA AND PRIVACY PRACTICES. BY ACCESSING
THIRD PARTY APPS, YOU AGREE TO REVIEW THE TERMS OF SERVICE AND PRIVACY POLICIES OF THE
PROVIDERS. IF YOU DO NOT AGREE WITH THE TERMS OR POLICIES OF ANY PROVIDER OR DO NOT
CONSENT TO THE USE OF GEOLOCATION DATA WHERE APPLICABLE, DO NOT USE THAT THIRD PARTY
APP.
For iPhone users
This function is compatible with iPhones installed with iOS 6.0 or later.
For Android device users
This function is compatible with devices that have Android OS 2.3 or later installed.
- 21 -
NOTE
PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT LIMITATION
THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF SUCH APPS ARE THE
SOLE RESPONSIBILITY OF THE APP PROVIDER.
Playback of an application via the unit
2
3
4
5
6
English
1
Connect this unit with the mobile device.
• iPhone via USB (page 14)
• iPhone/Android device via Bluetooth (page 16)
Press the M.C. dial to display the main menu.
Turn the M.C. dial to select [SYSTEM], then press to confirm.
Turn the M.C. dial to select [PHONE CONNECT], then press to confirm.
Turn the M.C. dial to select one of the below, then press to confirm.
• Select [IPHONE] for iPhone.
• Select [ANDROID] for Android device.
Turn the M.C. dial to select one of the below.
• Select [WIRED] for the USB connection.
• Select [BLUETOOTH] for the Bluetooth connection.
NOTE
7
8
When the connection setting is changed, a message that lets you know that the connection
setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to
select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is
executed.
Press SRC/OFF to select [APP].
Operate the mobile device to start up the application.
NOTE
When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE
CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth
connection). Depending on your mobile device, it may not operate correctly.
Basic operations
You can make various adjustments in the FUNCTION settings (page 33).
Purpose
Operation
Select a track
Press
Fast forward or reverse
Press and hold
Pause/resume playback
Press BAND/
- 22 -
or
.
or
.
.
Pandora®
Listening to Pandora
Update the firmware of the Pandora application to the latest version before use.
1
2
3
4
5
Connect this unit with the mobile device.
• iPhone via USB (page 14)
• iPhone/Android device via Bluetooth (page 16)
If you choose a USB connection, proceed to step 6.
Press SRC/OFF to select [PANDORA].
Press and hold 1/
to display [PHONE CONNECT].
Turn the M.C. dial to select one of the below, then press to confirm.
• Select [IPHONE] for iPhone.
• Select [ANDROID] for Android device.
Turn the M.C. dial to select [BLUETOOTH] for iPhone/Android device via
Bluetooth.
NOTE
6
7
When the connection setting is changed, a message that lets you know that the connection
setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to
select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is
executed.
Press SRC/OFF to select [PANDORA].
Launch the Pandora application on the mobile device and start playback.
NOTE
When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE
CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth
connection). Depending on your mobile device, it may not operate correctly.
Basic operations
You can make various adjustments in the FUNCTION settings (page 33).
- 23 -
English
Pandora internet radio is a music service not affiliated with Pioneer. More information is
available at http://www.pandora.com.
The Pandora mobile application is available for iPhone and Android phones. Please visit
www.pandora.com/everywhere/mobile for the latest compatibility information.
Purpose
Operation
Press
Switch between Shuffle and the
station
Press
(list), then turn the M.C. dial to select the
Shuffle or the desired station.
.
Change the sort order
Press
(list), then select one of the following.
[ABC]: Sort the items in the list alphabetically.
[DATE]: Sort the items in the list in order of the
dates on which the items were created.
Play
When Shuffle or the station is selected, press the
M.C. dial.
Delete a station
1 When the station is selected, press and hold the
M.C. dial.
[DELETE YES] appears.
2 Press the M.C. dial.
To cancel, press BAND/
in step 1.
Pause/resume playback
Press 4/PAUSE.
Thumbs Up
Press 1/
.
Thumbs Down
Press 2/
.
Create a new station based on the
track currently being played
Press and hold 5/
.
Create a new station based on the
artist currently being played
Press and hold 6/
.
Store the track information currently 1 Press and hold 3/MIX.
being played in your Pandora
[BOOKMARK] appears.
account.
2 Press the M.C. dial.
NOTE
Some functions of Pandora may not be operated from the unit.
Spotify®
Spotify is a music streaming distribution service not affiliated with Pioneer. More
information is available at http://www.spotify.com.
The Spotify application is available for compatible smartphones, please visit https://
support.spotify.com/ for the latest compatibility information.
To enjoy Spotify as you drive, first download the Spotify app to your iPhone or Android
device. You can download it on the iTunes App Store or Google Play™. Choose a free
account or a paid Premium account, either in the app or at spotify.com. A Premium
account gives you more features, like offline listening.
- 24 -
English
Skip a track
Important
• This product incorporates Spotify software which is subject to 3rd party licenses found here:
www.spotify.com/connect/third-party-licenses.
• For information on the countries and regions where Spotify can be used, take a look at https://
www.spotify.com/us/select-your-country/.
1
2
3
4
5
Connect this unit with the mobile device.
• iPhone via USB (page 14)
• iPhone/Android device via Bluetooth (page 16)
If you choose a USB connection, proceed to step 6.
Press SRC/OFF to select [SPOTIFY].
Press and hold 1/
to display [PHONE CONNECT].
Turn the M.C. dial to select one of the below, then press to confirm.
• Select [IPHONE] for iPhone.
• Select [ANDROID] for Android device.
Turn the M.C. dial to select [BLUETOOTH] for iPhone/Android device via
Bluetooth.
NOTE
6
7
When the connection setting is changed, a message that lets you know that the connection
setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to
select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is
executed.
Press SRC/OFF to select [SPOTIFY].
Launch the Spotify application on the mobile device and start playback.
NOTE
When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE
CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth
connection). Depending on your mobile device, it may not operate correctly.
Basic operations
You can make various adjustments in the FUNCTION settings (page 33).
NOTE
The available operations may vary according to the type of contents (track/album/artist/playlist/radio)
you want to play.
- 25 -
English
Listening to Spotify
Update the firmware of the Spotify application to the latest version before use.
Purpose
Operation
Press
Search for a track from a list
1 Press
(list) to display the list.
2 Turn the M.C. dial to select the desired
category, then press to confirm.
3 Turn the M.C. dial to select the desired
file, then press to confirm.
Playback starts.
or
.
Pause/resume playback
Press 4/PAUSE.
Thumbs Up (Only for radio)
Press 1/
.
Thumbs Down (Only for radio)
Press 2/
.
Random play (Only for track/album/artist/
playlist)
Press 5/
.
Repeat play (Only for track/album/artist/
playlist)
Press 6/
.
Start a radio channel based on the song
currently being played.
1 Press and hold 5/
to start a radio.
2 Press the M.C. dial.
• This function may not be available
depending on the selected song.
NOTE
Some functions of Spotify may not be operated from the unit.
SiriusXM Satellite Radio
(Only for FH-S700BS/S701BS)
Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over
140 channels, including commercial-free music plus the best sports, news, talk, comedy
and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and
Subscription are required. For more information, visit www.siriusxm.com
Replay™
You can pause, rewind or replay live satellite radio as well as the channel you are
currently listening to.
TuneStart™
Automatically start songs from the beginning when you tune to one of your preset
music channels stored on the current band of presets. For details, refer to TUNE START on
page 35.
- 26 -
English
Skip a track
NOTE
TuneStart is compatible with SXV200 or later tuner models. Not compatible with SXV100.
TuneScan™
NOTE
TuneScan is compatible with SXV200 or later tuner models. Not compatible with SXV100.
TuneMix™
Create a music channel that’s a blend of songs made up from the music channels stored
on the current band of presets. For details, refer to TUNEMIX on page 35.
NOTE
TuneMix™ is compatible with the SXV300 or later tuner models. Not compatible with the SXV200 or
SXV100.
Preparing for the SiriusXM Satellite Radio service
1
2
Press SRC/OFF to select [SIRIUSXM].
Press
/
to select Channel 0.
The Radio ID appears on the display.
In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle
Tuner.
NOTE
3
4
The Radio ID does not include the letters I, O, S or F.
Activate the SiriusXM service online or by phone.
For US Subscriptions:
• Visit www.siriusxm.com/activatenow
• Call SiriusXM Listener Care at 1-866-635-2349
For Canadian Subscriptions:
• Visit www.siriusxm.ca/activatexm
• Call 1-877-438-9677
[SUBSCRIPTION UPDATED] appears on the display when your SiriusXM Connect
Vehicle Tuner has been subscribed successfully.
Press any key to clear the activation message.
NOTE
The activation process usually takes 10 minutes to 15 minutes but may take up to an hour in some
cases. Do not turn off the unit until you clear the activation message in step 4.
- 27 -
English
Scan through short previews of songs you may have missed on music channels stored
on the current band of presets.
Each song in the current channel plays for six seconds at a time.
For details, refer to TUNE SCAN (scanning the songs) on page 35.
Listening to a channel
1
Press SRC/OFF to select [SIRIUSXM].
Press BAND/
to select a band from [SXM1], [SXM2] or [SXM3].
Press
/
to select a channel.
Pressing and holding either button will rapidly browse through the channels.
Press and hold either button then release to tune automatically. Scanning stops
when the unit receives a channel. To cancel seek tuning, press
/
.
Basic operations
1 Press and hold DISP to select the operation mode [CHANNEL] or [REPLAY].
NOTE
You can exit the replay mode by pressing and holding BAND/
.
Purpose
Operation
Select a channel
1 Set the operation mode to [CHANNEL].
2 Press
or
.
Pressing and holding either button will
rapidly browse through the channels.
Skip backward/forward
1 Set the operation mode to [REPLAY].
2 Press
or
.
Fast forward or reverse
1 Set the operation mode to [REPLAY].
2 Press and hold
or
.
NOTE
You can also make various adjustments in the SiriusXM settings (page 34).
Category scan
The live broadcast for each channel in the current category plays for six seconds at a
time. Follow the instructions below.
To search for a channel from a list
1
2
3
Press
during playback.
Turn the M.C. dial to select a category.
Select one of the operations below.
Category scan: Press and hold the M.C. dial to switch to category scan.
- 28 -
English
2
3
4
Press and hold DISP, then select [CHANNEL].
You can also select the operation mode by the SiriusXM settings (page 34).
Channel search: Press the M.C. dial to stop a scan.
NOTE
Press DISP to change the display information between “Channel Name”, “Artist Name”, “Song Title”,
“Content Info” and “Channel Number”.
Scan options
Operation
Stopping a scan (selecting the channel or
song playing)
Press the M.C. dial.
English
Purpose
Switching to the next/previous song during Press
TuneScan
or
.
Switching to the next/previous channel
during the category scan
Press
or
.
Aborting a scan (The last channel or song
will continue to play when scan ends.)
Press BAND/
.
Channel Preset
To preset a channel
1
While receiving a channel you want to store, press and hold one of the number
buttons (1/
to 6/
) until it stops flashing.
To play the stored channels, select the band and then press a number button (1/
6/
).
to
To preset a channel from the program list
1
2
3
4
While receiving a channel you want to store, press .
Turn the M.C. dial to select [PRESETS], then press to confirm.
Turn the M.C. dial to select a preset channel.
Press and hold the M.C. dial to store.
To play the stored channels, turn the M.C. dial to select a preset channel, then press to
confirm.
Parental Control
Some SiriusXM channels contain mature content. You can lock these channels. For
details, see [PARENTAL CTRL] in SiriusXM settings (page 36).
- 29 -
Using Pioneer ARC APP
WARNING
Do not attempt to operate the application while driving. Make sure to pull off the road and park your
vehicle in a safe location before attempting to use the controls on the application.
For iPhone users
This function is compatible with iPhones (iPhone 5 or later) installed with iOS 8.0 or later.
You can download Pioneer ARC APP on iTunes App Store.
For Android device users
This function is compatible with devices that have Android OS 4.1 or later installed and
also support AOA (Android Open Accessory) 2.0.
You can download Pioneer ARC APP on Google Play.
NOTE
Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to their own
software design, regardless of the OS version.
Making a connection with Pioneer ARC APP
1
2
3
4
5
Connect this unit with the mobile device.
• iPhone/Android device via USB (page 14)
• iPhone/Android device via Bluetooth (page 16)
Press the M.C. dial to display the main menu.
Turn the M.C. dial to select [SYSTEM], then press to confirm.
Turn the M.C. dial to select [PHONE CONNECT], then press to confirm.
Turn the M.C. dial to select one of the below, then press to confirm.
• Select [IPHONE] for iPhone.
• Select [ANDROID] for Android device.
NOTE
When the connection setting is changed, a message that lets you know that the connection
setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to
select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is
executed.
- 30 -
English
You can operate the unit from Pioneer ARC APP installed on an iPhone/Android device.
In some cases, you can control aspects of the application, such as source selection,
pause, etc., by using the unit.
For details on what operations are available on the application, see the application’s help
section.
6
Turn the M.C. dial to select one of the below.
When [IPHONE] is selected in step 5
• Select [WIRED] for the USB connection.
• Select [BLUETOOTH] for the Bluetooth connection.
NOTE
7
8
If Pioneer ARC APP has not been installed on your Android device yet, a message that prompts you
to install the application will appear on your Android device. Select [OFF] in [P.APP AUTO ON] to
clear the message (page 40).
Press SRC/OFF to select any source.
Launch Pioneer ARC APP on the mobile device via USB connection.
Press and hold M.C. dial via Bluetooth connection.
NOTE
When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE
CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth
connection). Depending on your mobile device, it may not operate correctly.
Listening to music on Android
1
Press SRC/OFF to select [ANDROID].
Basic operations
Purpose
Operation
Select a track
Press
Fast forward or reverse
Press and hold
or
Pause/resume playback
Press 4/PAUSE.
.
or
Audio Adjustments
(Network mode is only available for FH-S700BS/S701BS.)
You can also make various adjustments in the AUDIO settings (page 36).
- 31 -
.
English
When [ANDROID] is selected in step 5
• Select [APP CONTROL] for the USB connection.
• Select [BLUETOOTH] for the Bluetooth connection.
When you select the USB connection, Pioneer ARC APP on the Android device starts
automatically if [ON] is selected in [P.APP AUTO ON] (page 40).
Operation modes
This unit features two operation modes: network mode and standard mode. You can
switch between modes as desired (page 11).
Network mode
Standard mode
You can create a 4-speaker system with front and rear speakers or front speakers and
subwoofers, or a 6-speaker system with front and rear speakers and subwoofers.
Adjusting the cut-off frequency value and the slope
value
You can adjust the cut-off frequency value and the slope value of each speaker.
The following speakers can be adjusted.
Network mode:
[HIGH] (high-range speaker HPF), [MID HPF] (middle-range speaker HPF), [MID LPF]
(middle-range speaker LPF), [SUBWOOFER]
Standard mode:
[FRONT], [REAR], [SUBWOOFER]
NOTE
[SUBWOOFER] can only be selected when [ON] is selected in [SUBWOOFER] (page 37).
1
2
3
4
5
6
Press the M.C. dial to display the main menu.
Turn the M.C. dial to select [AUDIO], then press to confirm.
Turn the M.C. dial to select [CROSSOVER], then press to confirm.
Turn the M.C. dial to select the speaker unit (filter) to be adjusted, then press to
confirm.
Turn the M.C. dial to select [HPF] or [LPF] according to the speaker unit (filter),
then press to confirm.
Turn the M.C. dial to select an appropriate cut-off frequency for the speaker unit
(filter) selected in step 4, then press to confirm.
Network mode:
[1.25K] to [12.5K] (if you choose [HIGH] or [MID LPF])
- 32 -
English
You can create a 2-way + SW multi-amp and multi-speaker system with high range
speaker, middle range speaker and subwoofer for reproduction of high, middle and low
frequencies (bands).
[25] to [250] (if you choose [MID HPF] or [SUBWOOFER])
Standard mode:
[25HZ] to [250HZ]
7
Settings
You can adjust various settings in the main menu.
1
2
3
Press the M.C. dial to display the main menu.
Turn the M.C. dial to select one of the categories below, then press to confirm.
• FUNCTION settings (page 33)
• AUDIO settings (page 36)
• SYSTEM settings (page 38)
• ILLUMINATION settings (page 42)
• MIXTRAX settings (page 43)
Turn the M.C. dial to select the options, then press to confirm.
FUNCTION settings
The menu items vary according to the source.
Menu Item
Description
BSM
Store the six strongest stations on the number
buttons (1/
to 6/
) automatically.
LOCAL
FM: [OFF], [LV1], [LV2], [LV3], [LV4] Restrict the tuning station according to the
AM: [OFF], [LV1], [LV2]
signal strength.
- 33 -
English
Turn the M.C. dial to select an appropriate slope for the speaker unit (filter)
selected in step 4.
Network mode:
[–6] to [–24] (if you choose [HIGH], [MID HPF] or [MID LPF])
[–12] to [–36] (if you choose [SUBWOOFER])
Standard mode:
[–6] to [–24] (if you choose [FRONT] or [REAR])
[–6] to [–36] (if you choose [SUBWOOFER])
Menu Item
Description
SEEK
[MAN], [PCH]
Assign
or
buttons to seek the stations
one by one (manual tuning) or select a station
from the preset channels.
Store the information about the song currently
being played to your music list on Spotify.
UNSAVE
Remove the song information stored in [SAVE].
SEL DEVICE
iPod
Connect a Bluetooth device in the list.
S.RTRV
USB
iPod
AUX
[1] (effective for low compression Enhance compressed audio and restore rich
rates),
sound.
[2] (effective for high
compression rates),
[OFF]
BOOKMARK
Store the track information currently being
played in your Pandora account.
NEW STATION
[FROM TRACK], [FROM ARTIST]
Create a new station based on the track or artist
currently being played.
PAUSE
Pause or resume playback.
PLAY
Start playback.
STOP
Stop playback.
SiriusXM settings
(Only for FH-S700BS/S701BS)
- 34 -
English
SAVE
Menu Item
Description
PAUSE
Pause or resume playback.
OPERATE MODE
Press
or
buttons to select a channel
or skip backward/skip forward.
TUNEMIX
[ON], [OFF]
Create a music channel that’s a blend of songs
made up from the music channels stored on the
current band of presets.
TUNE SCAN
Scan through songs from your music channel
presets.
TUNE START
[ON], [OFF]
Start playback of the broadcast from the
beginning of a song when tuning to a preset
music channel.
- 35 -
English
[CHANNEL], [REPLAY]
Menu Item
Description
PARENTAL CTRL
[LOCKED CH], [CLEAR ALL], [EDIT
CODE]
AUDIO settings
Network mode is only available for FH-S700BS/S701BS.
Menu Item
Description
EQ SETTING
[SUPER BASS], [POWERFUL],
Select or customize the equalizer curve.
[NATURAL], [VOCAL], [CUSTOM1], • When you select a setting other than
[CUSTOM2], [FLAT]
[CUSTOM1] and [CUSTOM2], you can also
customize the equalizer curve by pressing and
Select an equalizer band and
holding the M.C. dial, then store the
level for further customizing.
customized equalizer curve in [CUSTOM1].
Equalizer band: [50HZ] to
[12.5kHZ]
Equalizer level: [–6] to [+6]
FADER*1*2 (Only for standard mode)
Adjust the front and rear speaker balance.
- 36 -
English
Input the current passcode on the [PASSCODE]
screen (the default passcode is 0000).
1 Turn the M.C. dial to select a number.
2 Press the M.C. dial to move the cursor to the
next position.
3 After inputting the passcode, press the M.C.
dial.
4 Turn the M.C. dial to select one of the
following menu items, then press to confirm.
• [LOCKED CH]: Lock the current channel (except
for Channel 0 and Channel 1), which contains
mature content.
1 Press the M.C. dial to turn the lock on or off.
• [CLEAR ALL]: Unlock all the channels (except for
Channel 0 and Channel 1) that have restricted
access.
1 Turn the M.C. dial to switch to [YES], then
press to confirm.
• [EDIT CODE]: Change the passcode.
1 Repeat steps 1 to 3 to enter a new passcode.
2 After inputting the passcode, press the M.C.
dial.
The new passcode is saved.
Menu Item
Description
BALANCE
Adjust the left and right speaker balance.
SUBWOOFER
[ON], [OFF]
Set to [ON] when using a subwoofer speaker.
[NOR], [REV]
Select the subwoofer phase.
SPEAKER LEVEL
Network mode: [HIGH L], [HIGH Select a speaker unit (filter) and adjust the
R], [MID L], [MID R], [SUBWOOFER] output level.
Standard mode: [FRONT L],
• Each value you have adjusted changes when
[FRONT R], [REAR L], [REAR R],
you change the [POSITION] setting (page 37).
[SUBWOOFER]
Output level: [–24] to [10]
CROSSOVER
Select a speaker unit (filter) to adjust the HPF or
LPF cut-off frequency and the slope for each
speaker unit.
For details on the [CROSSOVER] setting, see
page 32.
POSITION
[OFF], [FRONT LEFT] (front seat
left), [FRONT RIGHT] (front seat
right), [FRONT] (front seats), [ALL]*
* Only for standard mode
Select a listening position to adjust the speakers'
output levels automatically and add a delay time
that corresponds to the number and locations of
occupied seats.
TIME ALGNMNT
[INITIAL], [OFF], [CUSTOM]
Select or customize the time alignment settings
to reflect the distance between the listener’s
Select a type of speaker and
position and each speaker.
adjust the speaker distance for
• Select [INITIAL] to initialize the setting value.
further customizing in [CUSTOM]. • Select [OFF] to reset all setting values to 0.
Network mode: [HIGH L], [HIGH • The [CUSTOM] setting is available when
R], [MID L], [MID R], [SUBWOOFER] [FRONT LEFT] or [FRONT RIGHT] is selected in
Standard mode: [FRONT L],
[POSITION] (page 37).
[FRONT R], [REAR L], [REAR R],
• The [CUSTOM] setting is not available when
[SUBWOOFER]
[OFF] is selected in [SUBWOOFER] (page 37).
Speaker distance (inch): [140] to
[0]
- 37 -
English
SUBWOOFER*3*4
Menu Item
Description
SAVE SETTINGS
[YES], [NO]
Save to later recall the following sound settings
at their current values: [CROSSOVER], [SPEAKER
LEVEL], [EQ SETTING], [POSITION], [TIME
ALGNMNT], [D.BASS], [SUBWOOFER].
Load the sound settings, when you have already
performed [SAVE SETTINGS].
D.BASS
[OFF], [LOW], [HI]
Boost the bass level dynamically to offer an
effect as if a subwoofer was added to the system.
LOUDNESS
[OFF], [LOW], [MID], [HI]
Compensate for clear sound at low volume.
[+4] to [–4]
Adjust the volume level for each source except
FM.
Each of the below combinations are set to the
same setting automatically.
• When making a USB connection, set USB, iPod,
PANDORA, ANDROID, SPOTIFY, and APP.
• When making a Bluetooth connection, set BT
AUDIO, iPod, PANDORA, ANDROID, SPOTIFY,
and APP.
SLA
*1
*2
*3
*4
Not available when [SW] is selected in [REAR-SP] in the INITIAL settings (page 12).
Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 12).
Not available when [FUL] is selected in [REAR-SP] in the INITIAL settings (page 12).
Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 12).
SYSTEM settings
You can also access to these menus when the unit is turned off.
Menu Item
Description
LANGUAGE
[ENG](English), [ESP](Spanish),
[FRA] (Canadian French)
Select the language to display the text
information from a compressed audio file.
CLOCK SET
Set the clock (page 11).
- 38 -
English
LOAD SETTINGS
Menu Item
Description
12H/24H
[12H], [24H]
Select the time notation.
BEEP TONE (Only for standard mode)
[ON], [OFF]
INFO DISPLAY (Only for FH-S500BT/S501BT)
[SOURCE/SPEANA], [CLOCK/
SPEANA], [SRC/LIVE FX], [CLOCK/
LIVE FX], [SOURCE], [SPEANA],
[OFF]
Display the item on the sub information display.
• When [SOURCE/SPEANA] or [CLOCK/SPEANA] is
selected, display the antenna instead of the
speana on the radio source.
INFO DISPLAY (Only for FH-S700BS/S701BS)
[SOURCE/BTINFO], [SOURCE/
Display the item on the sub information display.
SPEANA], [CLOCK/BTINFO],
• When [SOURCE/SPEANA] or [CLOCK/SPEANA] is
[CLOCK/SPEANA], [LEVEL METER],
selected, display the antenna instead of the
[SPEANA], [OFF]
speana on the radio source.
DOT DISPLAY (Only for FH-S700BS/S701BS)
[SPEANA], [ICON]
Select [SPEANA] or [ICON] to appear on the left
side of the display.
[ON], [OFF]
Set to [ON] when using an auxiliary device
connected to the unit.
AUX
BT AUDIO
[ON], [OFF]
Set the Bluetooth signal on/off.
SPOTIFY
[ON], [OFF]
Set to [ON] when using the Spotify function.
BT MEM CLEAR
[YES], [NO]
Clear the Bluetooth device data (device list, PIN
code, call history, phone book, preset phone
numbers) stored in the unit.
[CLEARED] appears when data is successfully
deleted.
- 39 -
English
A beep can be heard when any button is pushed.
Select [OFF] to disable this function.
Menu Item
Description
PHONE CONNECT
[IPHONE], [ANDROID], [OTHERS]
P.APP AUTO ON
Select [ON] to automatically launch Pioneer ARC
APP when an Android device is connected to the
unit via AOA. (Only available when [APP CONTROL]
is selected in [PHONE CONNECT].)
[ON], [OFF]
USB AUTO
[ON], [OFF]
Select [ON] to automatically switch to [USB]
source when a USB device/iPhone is connected
to the unit.
Select [OFF] when a USB device/iPhone is being
connected to the unit just for charging.
Information on the connections for each device
The available sources differ depending on the setting value.
Please set [PHONE CONNECT] according to the table for the source you want to use.
For details on Pioneer ARC APP connection, see page 30.
When Pioneer ARC APP connection is NOT performed
Setting Value
Device
Connection method Available source(s)
[WIRED]
(When [IPHONE] or
[OTHERS] is selected)
iOS
USB
Android
USB
iOS
USB
Android
USB
iPod, PANDORA, APP,
SPOTIFY
Bluetooth
ANDROID (AOA)
Bluetooth
[USB MTP](MTP)
(When [ANDROID] is
selected)
iPod, PANDORA, APP,
SPOTIFY
Bluetooth
Bluetooth
- 40 -
USB MTP
-
English
Select the type of device and the appropriate
connection method according to your device.
See page 40 for details on the connections for
each device.
• Select [OTHERS] when you connect a mobile
device other than iPhone/Android.
Setting Value
Device
Connection method Available source(s)
[APP CONTROL](AOA)
(When [ANDROID] is
selected)
iOS
USB
Android
USB
Bluetooth
-
iOS
USB
-
Bluetooth
Android
ANDROID (AOA)
Bluetooth
iPod, PANDORA, APP,
SPOTIFY
USB
USB MTP
Bluetooth
PANDORA, APP,
SPOTIFY
When Pioneer ARC APP connection is performed
Setting Value
Device
Connection method Available source(s)
[WIRED]
(When [IPHONE] or
[OTHERS] is selected)
iOS
USB
Android
USB
iOS
USB
Android
USB
iOS
USB
Android
USB
iPod, PANDORA,
SPOTIFY
Bluetooth
ANDROID (Android
Music)
Bluetooth
[USB MTP](MTP)
(When [ANDROID] is
selected)
Bluetooth
Bluetooth
[APP CONTROL](AOA)
(When [ANDROID] is
selected)
iPod, PANDORA,
SPOTIFY
Bluetooth
Bluetooth
- 41 -
USB MTP
iPod, PANDORA,
SPOTIFY
ANDROID (Android
Music)
-
English
[BLUETOOTH]
iPod, PANDORA, APP,
SPOTIFY
Setting Value
Device
Connection method Available source(s)
[BLUETOOTH]
iOS
USB
Android
iPod, PANDORA,
SPOTIFY
USB
USB MTP
Bluetooth
PANDORA, ANDROID
(Android Music),
SPOTIFY
ILLUMINATION settings
Menu Item
Description
COLOR (Only for FH-S700BS/S701BS)
[KEY COLOR], [DISP COLOR],
[BOTH COLOR]
Select color for the keys/display of the unit from 12
preset colors, [SCAN] or [CUSTOM]*.
• [SCAN]: Cycle through a variety of colors
automatically.
• [CUSTOM]*:
1 Press and hold the M.C. dial until the color
setting display appears.
2 Set the primary color (R (red)/G (green)/B
(blue)) and brightness level ([0] to [60]).
You cannot select a level below 10 for all three
of R (red), G (green), B (blue) at the same time.
You can also customize the preset colors. Select
one of the preset colors, then press and hold the
M.C. dial until the color setting display appears.
* The CUSTOM setting is only available for [KEY
COLOR] and [DISP COLOR].
DIM SETTING
[SYNC ILLUMI]*, [SYNC CLOCK],
[MANUAL]
Change the display brightness.
* Only for FH-S700BS/S701BS
BRIGHTNESS (Only for FH-S700BS/S701BS)
[KEY], [DISP]
Select the brightness for the keys/display of the
unit from [1] to [10].
The available setting ranges differ depending on
[DIM SETTING].
- 42 -
English
Bluetooth
Menu Item
Description
BRIGHTNESS (Only for FH-S500BT/S501BT)
[1] to [10]
Change the display brightness.
The available setting ranges differ depending on
[DIM SETTING].
[FLASHING]
Select the key color when a call is received.
Applies the color set by [KEY COLOR].
[FLASH FX1] to [FLASH FX6]
Cycle through a variety of colors automatically.
[OFF]
No change in key color made.
ILLUMI FX (Only for FH-S700BS/S701BS)
[ON], [OFF]
The illumination effect can be seen when:
– there is an incoming call
– you are on a phone call
– a CD is inserted/ejected
The illumination effect will activate when the
ACC power is turned on/off regardless of this
setting.
MIXTRAX settings
Menu Item
Description
SHORT PLAYBCK
[1.0 MIN], [1.5 MIN], [2.0 MIN],
[2.5 MIN], [3.0 MIN], [OFF]
Select the length of the playback time.
FLASH AREA (Only for FH-S700BS/S701BS)
[KEY/DISPLAY], [KEY], [OFF]
Select the area for the illumination effect.
When [OFF] is selected, the color set under the
ILLUMINATION settings (page 42) is used as the
display color.
- 43 -
English
PHONE COLOR (Only for FH-S700BS/S701BS)
Menu Item
Description
FLASH PATTERN (Only for FH-S700BS/S701BS)
[SOUND LEVEL 1] to [SOUND LEVEL Change the illumination effect according to
6]
the sound and bass level.
The flash pattern changes according to the
sound level.
The flash pattern changes according to the
bass level.
[RANDOM1]
The flash pattern changes randomly according
to the sound level mode and low pass mode.
[RANDOM2]
The flash pattern changes randomly according
to the sound level mode.
[RANDOM3]
The flash pattern changes randomly according
to the low pass mode.
MIX PATTERN (Only for FH-S500BT/S501BT)
[SOUND LEVEL]
Change the MIXTRAX special effects according
to the audio level.
The mix pattern changes according to the
sound level.
[LOW PASS]
The mix pattern changes according to the bass
level.
[RANDOM]
The mix pattern changes randomly according
to the sound level mode and low pass mode.
DISPLAY FX
[ON], [OFF]
Set the MIXTRAX special effects on/off.
CUT IN FX
[ON], [OFF]
Turn the MIXTRAX sound effects on/off while
manually changing the tracks.
- 44 -
English
[LOW PASS 1] to [LOW PASS 6]
Connections/Installation
Connections
Ground wire
English
(Network mode is only available for FHS700BS/S701BS.)
In the following, "NW" represents network
mode and "STD" represents standard
mode. According to the connections you
have established, change the speaker
mode to standard mode (STD) or network
mode (NW) (page 11).
POWER AMP
Other devices
(Another electronic
device in the car)
Metal parts of
car’s body
*1 Not supplied for this unit
WARNING
• When speaker output is used by 4
channels, use speakers over 50 W
(maximum input power) and between 4
Ω to 8 Ω (impedance value). Do not use 1
Ω to 3 Ω speakers for this unit.
• When rear speaker output is used by 2 Ω
of subwoofer, use speakers over 70 W
(maximum input power).
* Please refer to connections for a
connection method.
• The black cable is ground. When
installing this unit or power amp (sold
separately), make sure to connect the
ground wire first. Ensure that the ground
wire is properly connected to metal parts
of the car’s body. The ground wire of the
power amp and the one of this unit or
any other device must be connected to
the car separately with different screws. If
the screw for the ground wire loosens or
falls out, it could result in fire, generation
of smoke or malfunction.
Important
• When installing this unit in a vehicle
without an ACC (accessory) position on
the ignition switch, failure to connect the
red cable to the terminal that detects
operation of the ignition key may result
in battery drain.
ACC position
No ACC position
• Use this unit with a 12-volt battery and
negative grounding only. Failure to do so
may result in a fire or malfunction.
• To prevent a short-circuit, overheating or
malfunction, be sure to follow the
directions below.
– Disconnect the negative terminal of the
battery before installation.
– Secure the wiring with cable clamps or
adhesive tape. Wrap adhesive tape
around wiring that comes into contact
with metal parts to protect the wiring.
– Place all cables away from moving parts,
such as the shift lever and seat rails.
– Place all cables away from hot places,
such as near the heater outlet.
- 45 -
This unit
- 46 -
FH-S700BS/S701BS
English
– Do not connect the yellow cable to the
battery by passing it through the hole
to the engine compartment.
– Cover any disconnected cable
connectors with insulating tape.
– Do not shorten any cables.
– Never cut the insulation of the power
cable of this unit in order to share the
power with other devices. The current
capacity of the cable is limited.
– Use a fuse of the rating prescribed.
– Never wire the negative speaker cable
directly to ground.
– Never band together negative cables of
multiple speakers.
• When this unit is on, control signals are
sent through the blue/white cable.
Connect this cable to the system remote
control of an external power amp or the
vehicle’s auto-antenna relay control
terminal (max. 300mA 12 V DC). If the
vehicle is equipped with a glass antenna,
connect it to the antenna booster power
supply terminal.
• Never connect the blue/white cable to
the power terminal of an external power
amp. Also, never connect it to the power
terminal of the auto antenna. Doing so
may result in battery drain or a
malfunction.
• The graphical symbol
placed on
the product means direct current.
FH-S500BT/S501BT
Microphone 3 m (9 ft. 10-1/8 in.)
SiriusXM Connect Vehicle Tuner input
Power cord input
Microphone input
Rear output (STD) or middle range
output (NW)
Front output (STD) or high range output
(NW)
Antenna input
Fuse (10 A)
Wired remote input
Hard-wired remote control adapter can
be connected (sold separately).
Subwoofer output
SiriusXM Connect Vehicle Tuner (sold
separately)
Rear output or subwoofer output
Front output
Power cord
Perform these connections when not
connecting a rear speaker or middle range
speaker lead to a subwoofer.
Perform these connections when using a
subwoofer without the optional amplifier.
Important
In the case of
above, two 4 Ω
subwoofers wired in parallel will represent
a 2 Ω load.
Power amp (sold separately)
Perform these connections when using the
optional amplifier.
To power cord input
Left
Right
- 47 -
English
Front speaker (STD) or high range
speaker (NW)
Rear speaker (STD) or middle range
speaker (NW)
White
White/black
Gray
Gray/black
Green
Green/black
Violet
Violet/black
Black (chassis ground)
Connect to a clean, paint-free metal
location.
Yellow
Connect to the constant 12 V supply
terminal.
Red
Connect to terminal controlled by the
ignition switch (12 V DC).
Blue/white
Connect to the system control terminal
of the power amp or auto-antenna relay
control terminal (max. 300 mA 12 V DC).
Subwoofer (4 Ω)
When using a subwoofer of 2 Ω, be sure
to connect the subwoofer to the violet
and violet/black leads of this unit. Do
not connect anything to the green and
green/black leads.
Not used.
Subwoofer (4 Ω) × 2
Orange/white (Only for FH-S700BS/
S701BS)
Connect to a car’s illumination signal.
Front speaker
To rear output or subwoofer output
Rear speaker or subwoofer
FH-S700BS/S701BS
Installation
FH-S500BT/S501BT
Leave ample
space
5 cm
5 cm
System remote control
Connect to blue/white cable.
Power amp (sold separately)
Connect with RCA cables (sold
separately)
To front output
1
- 48 -
Determine the appropriate position
where the holes on the bracket and
the side of the unit match.
English
System remote control
Connect to blue/white cable.
Power amp (sold separately)
Connect with RCA cables (sold
separately)
To rear output (STD) or middle range
output (NW)
Rear speaker (STD) or middle range
speaker (NW)
To front output (STD) or high range
output (NW)
Front speaker (STD) or high range
speaker (NW)
To subwoofer output
Subwoofer
Important
• Check all connections and systems before
final installation.
• Do not use unauthorized parts as this
may cause malfunctions.
• Consult your dealer if installation requires
drilling of holes or other modifications to
the vehicle.
• Do not install this unit where:
– it may interfere with operation of the
vehicle.
– it may cause injury to a passenger as a
result of a sudden stop.
• Install this unit away from hot places such
as near the heater outlet.
• Optimum performance is
obtained when the unit is
installed at an angle of less
than 60°.
• When installing, to ensure proper heat
dispersal when using this unit, make sure
you leave ample space behind the rear
panel and wrap any loose cables so they
are not blocking the vents.
To install on the sun visor
1 Fit the microphone lead into the
groove.
2
2
Screw
Mounting bracket
Dashboard or console
• Use either truss (5 mm × 9 mm) or
flush surface (5 mm × 9 mm) screws,
depending on the bracket screw
holes.
Install the microphone clip on the sun
visor.
Lowering the sun visor reduces the
voice recognition rate.
Installing the microphone
The microphone should be placed directly
in front of the driver at a suitable distance
to pick up their voice clearly.
CAUTION
It is extremely dangerous to allow the
microphone lead to become wound
around the steering column or shift lever.
Be sure to install the microphone in such a
way that it will not obstruct driving. It is
recommended to use the clamps (sold
separately) to arrange the lead.
Microphone clip
To install on the steering
column
1 Slide the microphone base to detach it
from the microphone clip.
NOTE
Depending on the vehicle model, the
microphone cable length may be too short
when you mount the microphone on the
sun visor. In such cases, install the
microphone on the steering column.
Microphone
Microphone clip
- 49 -
English
Microphone
lead
Groove
Tighten the screws on each side.
2
Microphone base
Install the microphone on the rear side
of the steering column.
English
Double-sided tape
- 50 -
Additional Information
– Make a Bluetooth connection
between the unit and the cellular
phone again.
Troubleshooting
Error messages
Common
The repeat play range changes
unexpectedly.
→ Depending on the repeat play range,
the selected range may change when
another folder or track is being selected
or during fast forwarding/reversing.
– Select the repeat play range again.
A subfolder is not played back.
→ Subfolders cannot be played when
[FLD] (folder repeat) is selected.
– Select another repeat play range.
The sound is intermittent.
→ You are using a device, such as a cellular
phone, that may cause audible
interference.
– Move electrical devices that may be
causing the interference away from
the unit.
The sound from the Bluetooth audio
source is not played back.
→ There is a call in progress on a
Bluetooth-connected cellular phone.
– The sound will be played back when
the call is terminated.
→ A Bluetooth-connected cellular phone
is currently being operated.
– Stop using the cellular phone.
→ The connection between the unit and
the cellular phone is not established
correctly after a call made by a
Bluetooth-connected cellular phone.
AMP ERROR
→ This unit fails to operate or the speaker
connection is incorrect.
→ The protective circuit is activated.
– Check the speaker connection.
– Turn the ignition switch OFF and back
to ON again. If the message remains,
contact your dealer or an authorized
Pioneer Service Station for assistance.
NO XXXX (NO TITLE, for example)
→ There is no embedded text information.
– Switch the display or play another
track/file.
CD player
ERROR-07, 11, 12, 17, 30
→ The disc is dirty.
– Clean the disc.
→ The disc is scratched.
– Replace the disc.
ERROR-07, 10, 11, 12, 15, 17, 30, A0
→ There is an electrical or mechanical
error.
– Turn the ignition switch OFF and back
to ON, then back to the CD player.
ERROR-15
→ The inserted disc is blank.
– Replace the disc.
ERROR-23
→ Unsupported CD format.
– Replace the disc.
- 51 -
English
The display automatically returns to the
normal display.
→ No operations have been made for
about 30 seconds.
– Perform an operation.
FORMAT READ
→ Sometimes there is a delay between the
start of playback and when you start to
hear any sound.
– Wait until the message disappears and
you hear sound.
HUB ERROR
→ The USB device connected via a USB
hub is not supported by this unit.
– Connect the USB device directly to this
unit using a USB cable.
SKIPPED
→ The inserted disc contains DRM
protected files.
– The protected files are skipped.
PROTECT
→ All the files on the inserted disc are
embedded with DRM.
– Replace the disc.
USB device/iPhone
FORMAT READ
→ Sometimes there is a delay between the
start of playback and when you start to
hear any sound.
– Wait until the message disappears and
you hear sound.
NO AUDIO
→ There are no songs.
– Transfer the audio files to the USB
device and connect.
→ The connected USB device has security
enabled.
– Follow the USB device instructions to
disable the security.
SKIPPED
→ The connected USB device contains
DRM protected files.
– The protected files are skipped.
PROTECT
→ All the files on the connected USB
device are embedded with DRM.
N/A USB
→ The connected USB device is not
supported by this unit.
– Disconnect your device and replace it
with a compatible USB device.
CHECK USB
→ The USB connector or USB cable has
short-circuited.
– Check that the USB connector or USB
cable is not caught in something or
damaged.
→ The connected USB device consumes
more than maximum allowable current.
– Disconnect the USB device and do not
use it. Turn the ignition switch OFF
and back to ACC or ON. Connect only
compliant USB devices.
→ The iPhone operates correctly but does
not charge.
– Make sure the connection cable for
the iPhone has not shorted out (e.g.,
not caught in metal objects). After
checking, turn the ignition switch OFF
and back to ON, or disconnect the
iPhone and reconnect.
ERROR-19
→ Communication failed.
– Perform one of the following
operations, then return to the USB
source.
• Turn the ignition switch OFF and
back to ON.
• Disconnect the USB device.
• Change to a different source.
→ iPhone failure.
– Disconnect the cable from the iPhone.
Once the iPhone’s main menu is
- 52 -
English
NO AUDIO
→ The inserted disc does not contain any
playable files.
– Replace the disc.
– Replace the USB device.
Pandora
displayed, reconnect the iPhone and
reset it.
ERROR-23
→ USB device was not formatted properly.
– Format the USB device with FAT12,
FAT16 or FAT32.
STOP
→ There are no songs in the current list.
– Select a list that contains songs.
NOT FOUND
→ The Pandora application has not started
running yet.
– Start up the Pandora application.
RATING ERROR
→ The thumb rating operation was
disabled.
– Run the same command for another
track.
CAN'T SKIP
→ The skip operation was disabled.
– Run the same command for another
track.
NO BT DEVICE GO TO BT MENU TO
REGISTER
→ No Bluetooth device found.
– Connect the unit and iPhone via
Bluetooth (page 16).
THUMB ERROR
→ Unable to save thumb rating.
– Try again later.
CONN. FAILED PRESS BAND KEY TO
RETRY
→ Bluetooth connection with iPhone
failed.
– Press BAND/
to make a
connection again.
BOOKMARK ERR
→ Unable to save BookMark.
– Try again later.
UNABLE TO ADD
→ Unable to add station.
– Try again later.
DISCONNECTED PRESS BAND KEY TO
RETRY
→ Bluetooth connection with iPhone
failed.
– Press BAND/
to make a
connection again.
SKIP LIMIT
→ Due to music licensing restrictions,
Pandora limits the total number of skips
per hour.
– Wait until Pandora allows you to skip
again.
Bluetooth device
ERROR-10
→ The power failed for the Bluetooth
module of the unit.
– Turn the ignition switch OFF and back
to ACC or ON.
UPDATE APP
→ This version of the Pandora application
is not supported.
- 53 -
English
ERROR-16
→ The iPhone firmware version is old.
– Update the iPhone version.
→ iPhone failure.
– Disconnect the cable from the iPhone.
Once the iPhone’s main menu is
displayed, reconnect the iPhone and
reset it.
ERROR-19
→ Communication failed.
– Disconnect the cable from the device.
Once the device’s main menu is
displayed, reconnect the device and
reset it.
– Connect a device that has a
compatible version of the Pandora
application installed.
ERROR
→ Device error message displayed in the
Pandora application.
– Check the connected device.
→ Pandora system is undergoing
maintenance.
– Try again later.
BAD NETWORK
→ The connected device is out of area.
– Connect the device to a network.
NO STATIONS
→ No station found.
– Create a station in the Pandora
application on your connected device.
NO BT DEVICE GO TO BT MENU TO
REGISTER
→ No Bluetooth device found.
– Connect the unit and the device via
Bluetooth (page 16).
CONN. FAILED PRESS BAND KEY TO
RETRY
→ Bluetooth connection failed.
– Press BAND/
to make a
connection again.
CHECK APP PRESS BAND KEY TO RETRY
→ Connection to the Pandora application
failed.
– Press BAND/
to make a
connection again.
DISCONNECTED PRESS BAND KEY TO
RETRY
→ Bluetooth connection lost.
– Press BAND/
to make a
connection again.
CANNOT DELETE
→ The station could not be deleted.
– Run the same command for another
station.
UNAVAILAVLE
→ The connected device is out of area.
– Connect the device to a network.
→ The operation was disabled.
– Run the same command for another
station.
APP
NO BT DEVICE GO TO BT MENU TO
REGISTER
→ No Bluetooth device found.
– Connect the unit and the device via
Bluetooth (page 16).
CONN. FAILED PRESS BAND KEY TO
RETRY
→ Bluetooth connection failed.
– Press BAND/
to make a
connection again.
DISCONNECTED PRESS BAND KEY TO
RETRY
→ Bluetooth connection failed.
– Press BAND/
to make a
connection again.
CHECK APP
→ Connection to the application failed.
– Follow the instructions that appear on
the screen.
- 54 -
English
LOG IN ERROR
→ Your Pandora account is not logged in.
– Disconnect the cable from the device,
and log in to your Pandora account.
Then reconnect the device.
STATION LIMIT
→ A new station cannot be added.
– Delete an old station to open a spot
for a new one.
NOT FOUND
→ The application has not started running
yet.
– Operate the mobile device to start up
the application.
NO BT DEVICE GO TO BT MENU TO
REGISTER
→ No Bluetooth device found.
– Connect the unit and the device via
Bluetooth (page 16).
NO SIGNAL
→ The SiriusXM Connect Vehicle Tuner is
having difficulty receiving the SiriusXM
satellite signal.
– Move your vehicle outdoors with a
clear view of the southern sky.
– Make sure that the SiriusXM magnetic
mount antenna is mounted on a metal
surface on the outside the vehicle.
– Move the SiriusXM antenna away from
any obstructions.
CONN. FAILED PRESS BAND KEY TO
RETRY
→ Bluetooth connection failed.
– Press BAND/
to make a
connection again.
CHECK APP PRESS BAND KEY TO RETRY
→ Connection to the Spotify application
failed.
– Press BAND/
to make a
connection again.
SUBSCRIPTION UPDATED
→ This unit has detected a change in your
SiriusXM subscription status.
– Press any key to clear the message.
DISCONNECTED PRESS BAND KEY TO
RETRY
→ Bluetooth connection lost.
– Press BAND/
to make a
connection again.
CH UNAVAIL
→ The channel that you have requested is
not available.
– Check the SiriusXM channel lineup.
CHECK APP
→ Connection to the Spotify application
failed.
– Follow the instructions that appear on
the screen.
CHAN UNSUB
→ The channel that you have requested is
not included in your SiriusXM
subscription package.
– Check the content of your SiriusXM
subscription package.
SiriusXM Satellite Radio (Only
for FH-S700BS/S701BS)
CHECK ANTENNA
→ The antenna cable may be either
disconnected or damaged.
– Check the antenna connection or
replace if damaged.
CH LOCKED
→ The channel has been locked by the
Parental Control function.
– Set [LOCKED CH] to [OFF] or [CLEAR
ALL] to [YES] in the FUNCTION settings
(page 36).
- 55 -
English
Spotify
CHECK TUNER
→ The radio is having difficulty
communicating with the SiriusXM
Connect Vehicle Tuner. The tuner may
be disconnected or damaged.
– Verify that the SiriusXM Connect
Vehicle Tuner cable is securely
connected to the radio.
Handling guidelines
be possible. Using such discs may result
in damage to this equipment.
• Do not attach commercially available
labels or other materials to the discs.
– The discs may warp making the disc
unplayable.
– The labels may come off during
playback and prevent ejection of the
discs, which may result in damage to
the equipment.
USB storage device
Discs and player
• Use only discs that feature either of the
following two logos.
• Use 12-cm discs.
• Use only conventional, fully circular discs.
• The following types of discs cannot be
used with this unit:
– DualDiscs
– 8-cm discs: Attempts to use such discs
with an adaptor may cause the unit to
malfunction.
– Oddly shaped discs
– Discs other than CDs
– Damaged discs, including discs that are
cracked, chipped or warped
– CD-R/RW discs that have not been
finalized
• Do not write on or apply chemicals to the
surface of the discs.
• To clean a CD, wipe the disc with a soft
cloth outward from the center.
• Condensation may temporarily impair
the player’s performance. Let it rest for
about one hour to adjust to a warmer
temperature. Also, wipe any damp discs
off with a soft cloth.
• When using discs that can be printed on
label surfaces, check the instructions and
the warnings of the discs. Depending on
the discs, inserting and ejecting may not
• Connections via USB hubs are not
supported.
• Firmly secure the USB storage device
before driving. Do not let the USB storage
device fall onto the floor, where it may
become jammed under the brake or
accelerator pedal.
• Depending on the USB storage device,
the following problems may occur.
– Operations may vary.
– The storage device may not be
recognized.
– Files may not be played back properly.
– The device may cause audible
interference when you are listening to
the radio.
iPhone
• Do not leave the iPhone in places with
high temperatures.
• Firmly secure the iPhone when driving.
Do not let the iPhone fall onto the floor,
where it may become jammed under the
brake or accelerator pedal.
• Incompatible text saved on the iPhone
will not be displayed by the unit.
Compressed audio
compatibility
• Only the first 32 characters can be
displayed as a file name (including the file
extension) or a folder name.
- 56 -
English
NO TUNEMIX CH
→ There is only one music channel in the
band.
– Select a band with two or more music
channels.
– Add more music channels to the
current band.
CAUTION
• Pioneer cannot guarantee compatibility
with all USB mass storage devices, and
assumes no responsibility for any loss of
data on media players, smartphones, or
other devices while using this product.
• Do not leave discs or a USB storage
device in any place that is subject to high
temperatures.
WMA files
File extension
Bit rate
Sampling frequency
Windows Media™
Audio Professional,
Lossless, Voice/DRM
Stream/Stream with
video
.wma
48 kbps to 320 kbps
(CBR), 48 kbps to 384
kbps (VBR)
32 kHz, 44.1 kHz, 48
kHz
Not compatible
Sampling frequency
Compatible ID3 tag
version
M3u playlist
Not compatible
WAV files
• WAV file formats cannot be connected via
MTP.
File extension
Quantization bits
Sampling frequency
.wav
8 and 16 (LPCM), 4
(MSADPCM)
16 kHz to 48 kHz
(LPCM), 22.05 kHz and
44.1 kHz (MS ADPCM)
AAC files
Compatible format
File extension
Sampling frequency
Transmission rate
Apple Lossless
AAC file bought from
the iTunes Store (.m4p
file extension)
AAC encoded by
iTunes
.m4a
11.025 kHz to 48 kHz
16 kbps to 320 kbps,
VBR
Not compatible
Not compatible
FLAC files
• FLAC file formats cannot be connected
via MTP.
• FLAC files may not be playable,
depending on the encoder.
MP3 files
File extension
Bit rate
MP3i (MP3
interactive), mp3 PRO
.mp3
8 kbps to 320 kbps
(CBR), VBR
8 kHz to 48 kHz (32
kHz, 44.1 kHz, 48 kHz
for emphasis)
1.0, 1.1, 2.2, 2.3, 2.4
(ID3 tag Version 2.x is
given priority over
Version 1.x.)
Not compatible
File extension
Sampling frequency
Quantization bit rate
Channel mode
.flac
8/11.025/12/16/22.05/
24/32/44.1/48/96 kHz
16/24 bit
1/2 ch
Disc
• Regardless of the length of the blank
section between the songs from the
original recording, compressed audio
discs play with a short pause between
songs.
- 57 -
English
• The unit may not work properly
depending on the application used to
encode WMA files.
• There may be a slight delay at the start of
the playback of audio files embedded
with image data, or audio files stored on a
USB device with numerous folder
hierarchies.
Playable folder
hierarchy
Playable folders
Playable files
File system
Not compatible
USB device
• There may be a slight delay when starting
playback of audio files on a USB storage
device with numerous folder hierarchies.
Playable folder
hierarchy
Up to eight tiers (A
practical hierarchy is
less than two tiers.)
Playable folders
Up to 1 500
Playable files
Up to 15 000
Playback of copyright- Not compatible
protected files
Partitioned USB
Only the first partition
device
can be played.
CAUTION
Pioneer accepts no responsibility for data
lost on the iPhone, even if that data is lost
while this unit is used.
Sequence of audio files
The user cannot assign folder numbers and
specify playback sequences with this unit.
Sequence of audio file depends on the
connected device.
Note that the hidden files in a USB device
cannot be played back.
Example of a hierarchy
Folder
Compressed
audio file
iPhone compatibility
This unit supports only the following iPhone
models. Supported iPhone software versions are
shown below. Older versions may not be
supported.
Made for
– iPhone 7
– iPhone 7 Plus
– iPhone SE
– iPhone 6s
– iPhone 6s Plus
– iPhone 6
– iPhone 6 Plus
– iPhone 5s
– iPhone 5c
– iPhone 5
01 to 05: Folder number
to : Playback sequence
Copyright and trademark
Bluetooth
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG,
- 58 -
English
Multi-session
playback
Packet write data
transfer
• Operations may vary depending on the
generation and/or software version of
the iPhone.
• Users of iPhone with the Lightning
Connector should use the Lightning to
USB Cable (supplied with iPhone).
• Refer to the iPhone manuals for
information about the file/format
compatibility.
• Audiobook, Podcast: Compatible
Up to eight tiers (A
practical hierarchy is
less than two tiers.)
Up to 99
Up to 999
ISO 9660 Level 1 and
2, Romeo, Joliet
Compatible
Inc. and any use of such marks by PIONEER
CORPORATION is under license. Other
trademarks and trade names are those of their
respective owners.
WMA
Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or
other countries.
This product includes technology owned
by Microsoft Corporation and cannot be
used or distributed without a license from
Microsoft Licensing, Inc.
FLAC
Copyright © 2000-2009 Josh Coalson
Copyright © 2011-2014 Xiph.Org
Foundation
Redistribution and use in source and
binary forms, with or without modification,
are permitted provided that the following
conditions are met:
– Redistributions of source code must
retain the above copyright notice, this list
of conditions and the following
disclaimer.
– Redistributions in binary form must
reproduce the above copyright notice,
this list of conditions and the following
disclaimer in the documentation and/or
other materials provided with the
distribution.
– Neither the name of the Xiph.org
Foundation nor the names of its
contributors may be used to endorse or
promote products derived from this
software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE
COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT
iPhone
iPhone is a trademark of Apple Inc.
Lightning is a trademark of Apple Inc.
“Made for iPhone” means that an
electronic accessory has been designed to
connect specifically to iPhone,
respectively, and has been certified by the
developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance
with safety and regulatory standards.
Please note that the use of this accessory
with iPhone may affect wireless
performance.
Android & Google Play
Android, Google Play, and the Google Play
logo are trademarks of Google Inc.
SiriusXM Satellite Radio
Sirius, XM and all related marks and logos
are trademarks of Sirius XM Radio Inc. All
rights reserved.
- 59 -
English
iTunes
Apple and iTunes are trademarks of Apple
Inc., registered in the U.S. and other
countries.
NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Pandora® internet radio
PANDORA, the PANDORA logo, and the
Pandora trade dress are trademarks or
registered trademarks of Pandora Media,
Inc. Used with permission.
Pandora is only available in certain
countries. Please visit
http://www.pandora.com/legal
for more information.
Specifications
General
MIXTRAX
MIXTRAX is a trademark of the PIONEER
CORPORATION.
Spotify®
SPOTIFY and the Spotify logo are among
the registered trademarks of Spotify AB.
Compatible mobile digital devices and
premium subscription required, where
available, see https://www.spotify.com.
Audio
T-Kernel 2.0
This product uses the source code of TKernel 2.0 under T-License 2.0 granted by
T-Engine Forum (www.tron.org).
MP3
Copyright (C) 1998-2009 PacketVideo
Licensed under the Apache License,
Version 2.0 (the "License"); you may not use
this file except in compliance with the
License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE2.0
Unless required by applicable law or
agreed to in writing, software distributed
under the License is distributed on an "AS
IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express
or implied.
See the License for the specific language
governing permissions and limitations
under the License.
(Network mode is only available for FHS700BS/S701BS.)
Maximum power output:
• 50 W × 4 ch/4 Ω (for no subwoofer)
• 50 W × 2 ch/4 Ω + 70 W × 1 ch/2 Ω
(for subwoofer)
Continuous power output:
22 W × 4 (50 Hz to 15 000 Hz, 5 %
THD, 4 Ω load, both channels driven)
Load impedance: 4 Ω (4 Ω to 8 Ω (2 Ω for 1
ch) allowable)
Preout maximum output level: 2.0 V (FHS700BS/S500BT/S501BT), 4.0 V (FHS701BS)
Equalizer (13-Band Graphic Equalizer):
Frequency: 50 Hz/80 Hz/125 Hz/200
Hz/315 Hz/500 Hz/800 Hz/1.25 kHz/2
kHz/3.15 kHz/5 kHz/8 kHz/12.5 kHz
Gain: ±12 dB (2 dB step)
High pass filter (Standard mode):
Frequency: 25 Hz/31.5 Hz/40 Hz/50
Hz/63 Hz/80 Hz/100 Hz/125 Hz/160
Hz/200 Hz/250 Hz
Slope: –6 dB/oct, –12 dB/oct, –18 dB/
oct, –24 dB/oct, OFF
Subwoofer/Low pass filter (Standard
mode):
- 60 -
English
Power source: 14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system: Negative type
Maximum current consumption: 10.0 A
Dimensions (W × H × D):
D
Chassis: 178 mm × 100 mm × 165 mm
(7 in. × 3-7/8 in. × 6-1/2 in.)
Nose: 170 mm × 96 mm × 16 mm (63/4 in. × 3-3/4 in. × 5/8 in.)
Weight: 1.3 kg (2.9 lbs)
CD player
System: Compact disc audio system
Usable discs: Compact disc
Signal-to-noise ratio: 94 dB (1 kHz) (IEC-A
network)
Number of channels: 2 (stereo)
MP3 decoding format: MPEG-1 & 2 Audio
Layer 3
WMA decoding format: Ver. 7, 8, 9, 9.1, 9.2
(2 ch audio), Ver. 10, 11, 12 (Windows
Media Player)
AAC decoding format: MPEG-4 AAC (iTunes
encoded only) (Ver. 10.6 and earlier)
WAV signal format: Linear PCM (Noncompressed)
USB
USB standard specification: USB 2.0 full
speed
Maximum current supply: 1.5 A
USB Protocol:
MSC (Mass Storage Class)
MTP (Media Transfer Protocol)
AOA (Android Open Accessory) 2.0
File system: FAT12, FAT16, FAT32
MP3 decoding format: MPEG-1 & 2 Audio
Layer 3
WMA decoding format: Ver. 7, 8, 9, 9.1, 9.2
(2 ch audio), Ver. 10, 11, 12 (Windows
Media Player)
AAC decoding format: MPEG-4 AAC (iTunes
encoded only) (Ver. 10.6 and earlier)
FLAC decoding format: v1.2.1 (Free
Lossless Audio Codec)
WAV signal format: Linear PCM (Noncompressed)
FM tuner
Frequency range: 87.9 MHz to 107.9 MHz
Usable sensitivity: 11 dBf (1.0 μV/75 Ω,
mono, S/N: 30 dB)
Signal-to-noise ratio: 65 dB (analog
broadcasting) (IHF-A network)
AM tuner
Frequency range: 530 kHz to 1 710 kHz
Usable sensitivity: 25 μV (S/N: 20 dB)
Signal-to-noise ratio: 60 dB (analog
broadcasting) (IHF-A network)
- 61 -
English
Frequency: 25 Hz/31.5 Hz/40 Hz/50
Hz/63 Hz/80 Hz/100 Hz/125 Hz/160
Hz/200 Hz/250 Hz
Slope: –6 dB/oct, –12 dB/oct, –18 dB/
oct, –24 dB/oct, –30 dB/oct, –36 dB/
oct, OFF
Gain: +10 dB to –24 dB (1 dB step)
Phase: Normal/Reverse
Speaker level (Standard mode):
+10 dB to –24 dB (1 dB step)
Time alignment (Standard mode):
0 Inch to 140 Inch (1 inch/Step)
High pass filter (HIGH) (Network mode):
Frequency: 1.25 kHz/1.6 kHz/2 kHz/
2.5 kHz/3.15 kHz/4 kHz/5 kHz/6.3 kHz/
8 kHz/10 kHz/12.5 kHz
Slope: –6 dB/oct, –12 dB/oct, –18 dB/
oct, –24 dB/oct
High pass filter (MID) (Network mode):
Frequency: 25 Hz/31.5 Hz/40 Hz/50
Hz/63 Hz/80 Hz/100 Hz/125 Hz/160
Hz/200 Hz/250 Hz
Slope: –6 dB/oct, –12 dB/oct, –18 dB/
oct, –24 dB/oct, OFF
Low pass filter (MID) (Network mode):
Frequency: 1.25 kHz/1.6 kHz/2 kHz/
2.5 kHz/3.15 kHz/4 kHz/5 kHz/6.3 kHz/
8 kHz/10 kHz/12.5 kHz
Slope: –6 dB/oct, –12 dB/oct, –18 dB/
oct, –24 dB/oct, OFF
Subwoofer (Network mode):
Frequency: 25 Hz/31.5 Hz/40 Hz/50
Hz/63 Hz/80 Hz/100 Hz/125 Hz/160
Hz/200 Hz/250 Hz
Slope: –12 dB/oct, –18 dB/oct, –24 dB/
oct, –30 dB/oct, –36 dB/oct, OFF
Gain: +10 dB to –24 dB (1 dB step)
Phase: Normal/Reverse
Speaker level (Network mode):
+10 dB to –24 dB (1 dB step)
Time alignment (Network mode):
0 Inch to 140 Inch (1 inch/Step)
Bluetooth
English
Version: Bluetooth 4.0 certified
Output power: +4 dBm Maximum (Power
class 2)
Frequency band(s): 2 400 MHz to 2 483.5
MHz
Bluetooth profiles:
GAP (Generic Access Profile)
SDAP (Service Discovery Application
Profile)
HFP (Hands Free Profile) 1.6
PBAP (Phone Book Access Profile)
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio/Video Remote Control
Profile) 1.5
SPP (Serial Port Profile) 1.1
CEA2006 Specifications
Power output: 14 W RMS × 4 Channels (4 Ω
and <
= 1 % THD+N)
S/N ratio: 91 dBA (reference: 1 W into 4 Ω)
NOTE
Specifications and the design are subject
to modifications without notice.
- 62 -
© 2017 PIONEER CORPORATION. All rights reserved.
© 2017 PIONEER CORPORATION. Tous droits de reproduction et de traduction réservés.
<QRI3028-A> UC
PIONEER ELECTRONICS (USA) INC.
PIONEER ELECTRONIQUE DU CANADA, INC.
GARANTIE LIMITEE
GARANTIE VALl DE SEULEMENT DANS LE PAYS OU LE PRODUIT A ETE ACHETE
GARANTIE
Pioneer Electronics (USA) Inc. (PUSA) et Pioneer Electronique du Canada, Inc. (POC) garantissent que les produits distribues par PUSA aux Etats-Unis et par POC au Canada qui, a pres
avoir ete installes et utilises conformement au manuel de l'utilisateur inclus avec l'unite. ne fonctionnent pas de fac;:on appropriee dans des conditions d'utilisation normales en raison d'un
vice de fabrication , seront repares ourem places par une unite de valeur comparable , au choix de PUSAou de POC , sans que vous deviez payer pour les pieces ou les travaux de reparation .
Les unites ou pieces de rechange fournies en vertu de Ia presente garantie peuventetre neuves ou remises neuf, au choix de PUSAou de POC.
LA PRESENTE GARANTIE LIMITEE S'APPLIQUE AU PROPRIETAIRE INITIAL AINSI QU'A TOUT PROPRIETAIRE SUBSEQUENT DU PRESENT PRODUIT PIONEER PENDANT LA PERIODE DE GARANTIE,
A CONDITION QUE LE PRODUIT AIT ETE ACHETE CHEZ UN DISTRIBUTEUR OU MARCHAND PIONEER AUTORISE AUX ETATS-UNIS OU AU CANADA. VOUS DEVREZ FOURNIR UN RELEVE DE CAISSE
OU UNE AUTRE PREUVE D'ACHAT VALIDE INDIQUANT LA DATE DE L'ACHAT INITIAL OU, Sl VOUS LOUEZ LE PRODUIT, VOTRE CONTRAT DE LOCATION INDIQUANT L'ENDROIT ET LA DATE DE
LA PREMIERE LOCATION. Sl JAMAIS UN SERVICE DE REPARATION EST REQUIS, LE PRODUIT DOlT ETRE EXPEDIE PENDANT LA PERIODE DE GARANTIE, EN PORT PREPAYE, A L'INTERIEUR DU
PAYS OU L'ACHAT A ETE EFFECTUE SEULEMENT, TEL QU'IL EST EXPLIQUE DANS LE PRESENT DOCUMENT. VOUS ETES RESPONSABLE DU DEMONTAGE ET DE L'INSTALLATION DU PRODUIT.
PUSA OU POC, LE CAS ECHEANT, PAIERA POUR VOUS RETOURNER LE PRODUIT REPARE OU REMPLACE, A L'INTERIEUR DU PAYS OU L'ACHAT A ETE EFFECTUE.
a
PERIODE DE GARANTIE DES PRODUITS
Produits stereo pour l'auto
Pieces
Main-d'ceuyre
1 an
1
an
La periode de garantie pour les clients qui louent le produit commence le jour ou le produitest utilise pour Ia premiere fois (a) pendant Ia peri ode de location ou (b) a pres Ia vente au detail , selon ce qui se produiten premier.
ELEMENTS NON COUVERTS PAR LA GARANTIE
UN PRODUIT ACHETE CHEZ UN DISTRIBUTEUR NON AUTORISE N'EST COUVERT PAR AUCUNE GARANTIE EXPRESSE OU IMPLICITE, Y COMPRIS QUELQUE GARANTIE
IMPLICITE DE QUALITE MARCHANDE OU D'ADAPTATION A UN USAGE PARTICULIER QUE CE SOIT. DE PLUS, CE PRODUIT EST STRICTEMENT VENDU " TEL QUEL " ET
"AVEC TOUS SES DEFAUTS EVENTUELS ".
PIONEER N'EST PAS RESPONSABLE DE QUELQUE DOMMAGE CONSECUTIF ET(OU) INDIRECT QUE CE SOIT.
PIONEER NE GARANTIT PAS LES PRODUITS ENUMERES CI-DESSUS LORSQU'ILS SONT UTILISES A DES FINS COMMERCIALES OU PROFESSIONNELLES, OU AU SEIN
DE TOUTE APPLICATION INDUSTRIELLE OU COMMERCIALE QUE CE SOIT.
LA PRESENTE GARANTIE NE S'APPLIQUE PAS 51 LE PRODUIT A ETE SOUMIS A UNE PUISSANCE NOMINALE EXCEDANT CELLE QUI A ETE ETABLIE DANS LES
DOCUMENTS S'Y APPLIQUANT.
LA PRESENTE GARANTIE NE COUVRE PAS LES TELEVISEURS OU LES ECRANS ENDOMMAGES EN RAISON DE L'APPLICATION D'IMAGES STATIQUES ET IMMOBILES
PENDANT.DE LONGUES PERIODES (IMAGES REMANENTES).
LA PRESENTE GARANTIE NE COUVRE PAS LE COFFRAGE OU LES ELEMENTS ESTHETIQUES, LES ANTENNES INSTALLEES PAR L'UTILISATEUR, LES DOMMAGES AUX
DISQUES OU AUX RUBANS OU DISQUES D'ENREGISTREMENT, LES DOMMAGES AU PRODUIT DECOULANT D'UNE RETOUCHE, D'UNE MODIFICATION NON AUTORISEE
PAR ECRIT PAR PIONEER, D'UN ACCIDENT, D'UN USAGE INAPPROPRIE OU D'UN USAGE ABUSIF, LES DOMMAGES PRODUITS PAR LA FOUDRE OU LA SURTENSION,
LES OOMMAGES SUBSEQUENT$ DECOULANT DE FUITES , LES DOMMAGES DECOULANT DE PILES DEFECTUEUSES OU DE L'UTILISATION DE PILES NON
CONFORMES A CELLES QUI SONT SPECIFIEES DANS LE MANUEL DE L'UTILISATEUR.
LA PRESENTE GARANTIE NE COUVRE PAS LE COUT DES PIECES OU DE LA MAIN-D'CEUVRE QUI SERAIENT AUTREMENT OFFERTES SANS FRAIS EN VERTU DE LA
PRESENTE GARANTIE, Sl ELLES SONT OBTENUES AUPRES D'UNE SOURCE AUTRE QU'UNE SOCIETE DE SERVICE OU AUTRE AUTORISEE OU DESIGNEE PAR
PIONEER. LA PRESENTE GARANTIE NE COUVRE PAS LES DEFECTUOSITES OU LES DOMMAGES CAUSES PAR L'UTILISATION D'UNE MAIN-D'CEUVRE OU DE PIECES
NON AUTORISEES, Nl D'UN ENTRETIEN INADEQUAT.
LES NUMEROS DE SERlE MODIFIES, OBLITERES OU ENLEVES ANNULENT LA PRESENTE GARANTIE DANS SA TOTALITE.
INVALIDITE DE TOUTE AUTRE GARANTIE
AUX ETATS;UNIS - PIONEER LIMITE SES OBLI~ATIONS EN VERTU DE TO~TE GARf\NTIE IMPLICI!E QUE CE SOIT1 Y COMPRIS ENTRE AUTRES LES GARANTIES IMPLICITES
DE QUALITE MARCHANDE OU D'ADAPTATION A UN USAGE PARTICULIER, A UNE PERIODE N'EXCEDANT PAS LA PERIODE DE GARANTIE. AUCUNE GARANTIE NE S'APPLIQUE
APRES LA PERIODE DE GARANTIE. CERTAINS ETATS NE PERMETTENT PAS LA LIMITATION DE LA DUREE D'UNE GARANTIE IMPLICITE, ET CERTAINS NE PERMETTENT PAS
L'EXCLUSION OU LA LIMITATION DES DOMMAGES CONSECUTIFS OU INDIRECT$ . LES LIMITATIONS ET EXCLUSIONS ETABLIES CI-DESSUS PEUVENT DONC NE PAS
S'APPLIQUER A VOUS. LA PRESENTE GARANTIE VOUS DONNE DES DROITS LEGAUX SPECIFIQUES. VOUS POUVEZ JOUIR D'AUTRES DROITS, QUI PEUVENT VARIER D'UN
ETAT A L'AUTRE.
AU CANADA· SOUS RESERVE DE CE QUI EST EXPRESSEMENT STIPULE DANS LES PRESENTES, AUCUNE REPRESENTATION, GARANTIE, OBLIGATION OU CONDITION,
QU'ELLE SOIT IMPLICITE, OBLIGATOIRE OU AUTRE, NE S'APPLIQUE A CE PRODUIT.
SERVICE
Pour profiter du service en vertu de Ia garantie aux Etats-Unis et au Canada, vous devez presenter votre releve de caisse ou, si vous louez le produit, votre contrat de location
indiquant l'endroit et Ia date de Ia transaction par le premier proprietaire.
AUX ETATS-UNIS - Communiquez avec un des partenaires Pioneer suivants pour le service :
Votre marchand Pioneer autorise- Votre marchand Pioneer peut reparer ou remplacer votre unite , ou bien vous diriger vers une societe de service Pioneer autorisee . Votre rec;:u
de caisse devrait enumerer ses coordonnees (numeros de telephone et de telecopieur. courriel , etc.).
Votre societe de service autorisee - Celle-ci peut reparer Ia plupart des produits electroniques pour l'auto et vous aviser des options supplementaires qui pourraient s'appliquer.
Veuillez acceder au site Web de Pioneer www.pioneerelectronics .com , cliquer sur l'onglet" Support" et choisir" Find a Service Center" pour trouver Ia societe de service Pioneer
Ia plus proche.
Pioneer Customer Support- Ce service peut vous aviser des options de service optimales pour votre modele et votre emplacement geographique. Veuillez consulter les coordonnees
ci-dessous pour communiquer avec Pioneer par telephone , par courrier ou par le biais de son site Web .
AU CANADA - POC a desigr;~e un certain nombre de societes de service autorisees partout au Canada si jamais vous avez besoin de services de reparation pour votre produit.
Communiquez avec Pioneer Electronique du Canada (les coordonnees se trouvent ci-dessous) pour trouver une societe de service autorisee.
Expedition de votre unite aux fins de service - Si vous expediez l'unite. vous devez l'emballer soigneusement et l'envoyer une societe de service autorisee ou Pioneer,
en port prepaye et selon une methode de transport pouvant etre suivie et assuree . Emballez le produit au moyen de materiaux coussines adequats pour eviter les dommages
pendant le transport. lncluez votre nom , vo~re adresse et un numero de telephone ou nous pouvons vous joindre pendant les heures de bureau .
Pour toutes les plaintes et problemes aux Etats-Unis, communiquez avec le service de Soutien Ia clientele au 1-800-421-1404. Au Canada , communiquez avec le groupe de
Satisfaction de Ia clientele au 1-877-283-5901 .
Pour le raccordement ou le fonctionnement de votre unite, ou pour trouver une societe de service autorisee , appelez ou ecrivez
a
a
a
a
a:
AUX ETATS-UNIS
CUSTOMER SUPPORT
PIONEER ELECTRONICS (USA) INC .
P.O. BOX
1720
LONG BEACH, CALIFORNIA 90801
1-800-421-1404
http://www. pioneerelectronics.com
AU CANADA
GROUPE DE SATISFACTION DE LA CLIENTELE
PIONEER ELECTRONIQUE DU CANADA, INC .
340 FERRIER STREET, UNIT 2
MARKHAM, ON L3R 2Z5
(905) 479-4411
1-877-283-5901
http://www.pioneerelectronics.ca
REGLEMENT DES CONFLITS
AUX ETATS-UNIS - Si un conflit se produit entre vous et Pioneer apres Ia reponse a une demande initiale faite au service de Soutien a Ia clientele, vous pouvez avoir
recours au Programme de resolution des plaintes de Pioneer pour resoudre le conflit. Ce programme vous est offert sans frais. Vous devez avoir recours au Programme
de resolution des plaintes avant de vous prevaloir de vos droits ou de chercher reparation en vertu du Titre I de Ia loi Magnuson-Moss Warranty-Federal Trade Commission
Improvement Act, 15 U.S.C. 2301 et s.s.
Pour avoir recours au Programme de resolution des plaintes, appelez au 1 800 421-1404 et expliquez au representant du service a Ia clientele qui vous repondra le
probleme auquel vous faites face et les demarches que vous avez entreprises pour faire reparer le produit pendant Ia periode de garantie, puis donnez-lui le nom du
distributeur I marchand autorise aupres duquel vous vous etes procure le produit Pioneer. Une fois que votre plainte a ete expliquee au representant, un numero de
resolution vous sera communique. Pioneer etudiera le conflit et, dans un delai de quarante (40) jours a pres Ia reception de votre plainte, (1) repondra a votre plainte
par ecrit pour vous aviser des demarches qu'elle entreprendra pour resoudre le conflit, et indiquera combien de temps ces demarches prendront; ou (2) repondra
a votre plainte par ecrit pour vous indiquer les raisons pour lesquelles elle n'entreprendra aucune demarche.
AU CANADA- Communiquez avec le directeur de Ia Satisfaction de Ia clientele au (905) 946-7412 pour discuter de votre plainte et resoudre rapidement le probleme.
ENREGISTREZ LE LIEU ET LA DATE D'ACHAT POUR REFERENCE ULTERIEURE
No. du modele : - - - - - - - - - - - - - - - - - - - - - - - - No. de serie : - - - -- - - - - -- - - - -- - - - - - - - - - - - -Dated~chat :
Achetede : _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _~
PRENEZ SOIN DE GARDER CETTE IN FORMATlON ET VOTRE REt;U D'ACHAT DANS UN EN DROIT SUR
< QRY3001-B/N >
lmprime en ThaYiande
PIONEER ELECTRONICS OF CANADA, INC.
PIONEER ELECTRONICS (USA) INC.
LIMITED WARRANTY
WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE
WARRANTY
Pioneer Electronics (USA) Inc. (PUSA), and Pioneer Electronics Of Canada, Inc. (POC), warrant that products distributed by PUSAin the U.S.A., and by POC in Canada that fail to
function properly under normal use due to a manufacturing defect when installed and operated according to the owner's manual enclosed with the unit will be repaired or replaced with
a unit of comparable value, at the option of PUSAor POC, without charge to you for parts or actual repair work. Replacement units and/or parts supplied under this warranty may be
new or rebuilt atthe option of PUSAor POC.
THIS LIMITED WARRANTY APPLIES TO THE ORIGINAL OR ANY SUBSEQUENT OWNER OF THIS PIONEER PRODUCT DURING THE WARRANTY PERIOD PROVIDED THE
PRODUCT WAS PURCHASED FROM AN AUTHORIZED PIONEER DISTRIBUTOR/DEALER IN THE U.S.A. OR CANADA. YOU WILL BE REQUIRED TO PROVIDE A SALES
RECEIPT OR OTHER VALID PROOF OF PURCHASE SHOWING THE DATE OF ORIGINAL PURCHASE OR, IF RENTED, YOUR RENTAL CONTRACT SHOWING THE PLACE
AND DATE OF FIRST RENTAL. IN THE EVENT SERVICE IS REQUIRED, THE PRODUCT MUST BE DELIVERED WITHIN THE WARRANTY PERIOD, TRANSPORTATION
PREPAID, ONLY FROM WITHIN THE COUNTRY OF PURCHASE AS EXPLAINED IN THIS DOCUMENT. YOU WILL BE RESPONSIBLE FOR REMOVALAND INSTALLATION OF
THE PRODUCT. PUSAOR POC,ASAPPROPRIATE, WILL PAY TO RETURN THE REPAIRED OR REPLACEMENT PRODUCT TO YOU WITHIN THE COUNTRY OF PURCHASE.
PRODUCT WARRANTY PERIOD
Car Stereo Products
Parts
Labor
1 Year
1 Year
The warranty period for retail customers who rent the product commences upon the date product is first put into use (a) during the rental period or (b) retail sale, whichever occurs first.
WHAT IS NOT COVERED
IF THIS PRODUCT WAS PURCHASED FROMAN UNAUTHORIZED DISTRIBUTOR, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTY
OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FORA PARTICULAR PURPOSE AND THIS PRODUCT IS SOLD STRICTLY "AS IS" AND "WITH ALL FAULTS".
PIONEER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIALAND/OR INCIDENTAL DAMAGES.
PIONEER DOES NOT WARRANT ANY PRODUCT LISTED ABOVE WHEN IT IS USED INA TRADE OR BUSINESS OR IN ANY INDUSTRIAL OR COMMERCIALAPPLICATION.
THIS WARRANTY DOES NOT APPLY IF THE PRODUCT HAS BEEN SUBJECTED TO POWER IN EXCESS OF ITS PUBLISHED POWER RATING.
THIS WARRANTY DOES NOT COVER DISPLAY SCREENS DAMAGED BY STATIC, NON-MOVING, IMAGES APPLIED FOR LENGTHY PERIODS (BURN-IN).
THIS WARRANTY DOES NOT COVER THE CABINET OR ANY APPEARANCE ITEM, USER ATTACHED ANTENNA, ANY DAMAGE TO RECORDS OR RECORDING TAPES OR DISCS, ANY
DAMAGE TO THE PRODUCT RESULTING FROM ALTERATIONS, MODIFICATIONS NOT AUTHORIZED IN WRITING BY PIONEER, ACCIDENT, MISUSE OR ABUSE, DAMAGE DUE TO
UGHTNINGORTOPOWERSURGES,SUBSEQUENTDAMAGE FROM LEAKING, DAMAGE FROM INOPERATIVE BATTERIES, OR THE USE OF BATTERIES NOT CONFORMING TO THOSE
SPECIFIEDINTHEOWNER'SMANUAL
THIS WARRANTY DOES NOT COVER THE COST OF PARTS OR LABOR WHICH WOULD BE OTHERWISE PROVIDED WITHOUT CHARGE UNDER THIS WARRANTY
OBTAINED FROM ANY SOURCE OTHER THAN A PIONEER AUTHORIZED SERVICE COMPANY OR OTHER DESIGNATED LOCATION. THIS WARRANTY DOES NOT COVER
DEFECTS OR DAMAGE CAUSED BY THE USE OF UNAUTHORIZED PARTS OR LABOR OR FROM IMPROPER MAINTENANCE.
ALTERED, DEFACED, OR REMOVED SERIAL NUMBERS VOID THIS ENTIRE WARRANTY
NO OTHER WARRANTIES
IN THE U.S.A.- PIONEER LIMITS ITS OBLIGATIONS UNDER ANY IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE, TO A PERIOD NOT TO EXCEED THE WARRANTY PERIOD. NO WARRANTIES SHALL APPLY AFTER THE
WARRANTY PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONGAN IMPLIED WARRANTY LASTS AND SOME STATES DO NOT ALLOWTHE EXCLUSIONS
OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOUSPECIFICLEGALRIGHTSANDYOUMAYHAVEOTHERRIGHTSWHICHMAYVARYFROMSTATETOSTATE.
IN CANADA- EXCEPT AS EXPRESSLY PROVIDED HEREIN, THERE ARE NO REPRESENTATIONS, WARRANTIES, OBLIGATIONS OR CONDITIONS, IMPLIED, STATUTORY
OR OTHERWISE, APPLICABLE TO THIS PRODUCT.
TO OBTAIN SERVICE
In the U.S.A. or Canada to receive warranty service you need to present your sales receipt or your rental contract showing place and date of original owner's transaction .
.Y.§A- Please contact one of the following Pioneer partners to obtain service:
Your Authorized Pioneer Dealer- Your Pioneer Dealer may repair or replace your unit, or refer you to an Authorized Pioneer Service Company. Your sales receipt should
list the contact information (phone number, fax, email, etc.) for your Dealer.
Your Authorized Pioneer Service Company- Can perform repairs for most Car Electronics products and can advise other options as applicable. Please access the
Pioneer website at www.pioneerelectronics.com and click on "Support" and select "Find a Service Center" to find the nearest Pioneer servicer.
Pioneer Customer Support- Can advise the optimal service option for your model and geographic location. Please reference the information listed below and phone,
email or access the Pioneer website to contact Pioneer.
CANADA- POC has a number of Authorized Service Companies should your product require service. Contact Pioneer of Canada as listed below to obtain a local service location.
Shipping Your Unit for Service- Please package it carefully and send it, transportation prepaid by a traceable, insured method, to an Authorized Service Company or Pioneer.
Use adequate padding material to prevent damage in transit. Include your name, address and telephone number where you can be reached during business hours.
On all complaints and concerns in the U.S.A. call Customer Support at 1-800-421-1404, or, in Canada, call Customer Satisfaction at (905) 479-4411.
IN THE U.S.A.
For hook-up and operation of your unit or to locate an
Authorized Service Company, please call or write:
CUSTOMER SUPPORT I PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1720
LONG BEACH, CALIFORNIA 90801
1-800-421-1404
http://www.pioneerelectronics.com
IN CANADA
For additional information on this warranty, please call or write:
CUSTOMER SATISFACTION GROUP
PIONEER ELECTRONICS OF CANADA, INC.
340 FERRIER STREET, UNIT 2
MARKHAM, ON L3R 2Z5
(905) 479-4411
1-877-283-5901
http://www.pioneerelectronics.ca
DISPUTE RESOLUTION
IN THE U.S.A. - Following our response to any initial request to Customer Support, should a dispute arise between you and Pioneer, Pioneer makes available its Complaint
Resolution Program to resolve the dispute. The Complaint Resolution Program is available to you without charge. You are required to use the Complaint Resolution Program
before you exercise any rights under, or seek any remedies, created by Title I ofthe Magnuson-Moss Warranty-Federal Trade Commission ImprovementAct, 15 U.S. C. 2301 et seq.
To use the Complaint Resolution Program call1-800-421-1404 and explain to the customer service representative the problem you are experiencing, steps you have taken to
have the product repaired during the warranty period and the name of the authorized Distributor/Dealer from whom the Pioneer product was purchased. After the complaint
has been explained to the representative, a resolution number will be issued. Within 40 days of receiving your complaint, Pioneer will investigate the dispute and will either:
(1) respond to your complaint in writing informing you what action Pioneer will take, and in what time period, to resolve the dispute; or (2) respond to your complaint in writing
informing you why it will not take any action.
IN CANADA- Call the Customer Satisfaction Manager at (905) 946-7 412 to discuss your complaint and to obtain a prompt resolution.
RECORD THE PLACE AND DATE OF PURCHASE FOR FUTURE REFERENCE
Model N o . - - - - - - - - - - - - - - - - - - - Serial No. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Purchase Date _ _ _ _ _ _ _ _ __
PurchasedFrom _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __
KEEP THIS INFORMATION AND YOUR SALES RECEIPT IN A SAFE PLACE
UCC0212
<
QRY3001-B/N >
Pirnted in Thailand
Download PDF
Similar pages