COH-TX2 & COH-RX2
4K x 2K HDMI to Optical Transmitter and Receiver
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
•
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
•
Never spill liquid of any kind on or into this product.
•
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
•
Do not attach the power supply cabling to building surfaces.
•
Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
•
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
•
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO.
DATE DD/MM/YY SUMMARY OF CHANGE
VR01
31/07/2013
Preliminary Release
CONTENTS
1. Introduction������������������������������������������������� 1
2. Applications������������������������������������������������ 1
3. Package Contents������������������������������������� 1
4. System Requirements��������������������������������� 1
5. Features������������������������������������������������������� 1
6. Operation Controls and Functions������������ 2
6.1 Transmitter Front and Rear Panels������� 2
6.2 Receiver Front and Rear Panels����������� 3
7. Connection Diagram��������������������������������� 4
8. Specifications��������������������������������������������� 5
9. Acronyms���������������������������������������������������� 6
1. INTRODUCTION
The 4Kx2K HDMI to Optical Transmitter and Receiver set uses fiber
optic cables to give you longer transmission distances (up to 300m)
utilizing thinner, lighter cables for greater flexibility in installations. With
this system the HDMI signal is uncompressed and is fully compliant with
HDMI and HDCP.
2. APPLICATIONS
• Digital signage
• Airport signage
• Advertising displays
• Video wall dsplays
• Surveillance systems
• Residential Installations
3. PACKAGE CONTENTS
• 1×HDMI to Optical Transmitter
• 1×Optical to HDMI Receiver
• 2×5V DC Power Adaptors
• Operational Manual
4. SYSTEM REQUIREMENTS
Source device such as a DVD or Blu-ray player with HDMI cables and
output displays such as HDTV’s and Monitors with HDMI ports.
5. FEATURES
• HDMI, HDCP and DVI compliance
• Supports 3D Signal and 4K x 2K resolutions
• Long transmission distances – up to 300m with OM3 50/125um cable
(SC-SC connector)
• Thinner and lighter cables for easier and more flexible installations
• Faster data transmission and lower power consumption
• Supports the reading of EDID information
1
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
OPTICAL
LINK
HDMI IN
POWER
HDMI
LINK
1 2 3
OPTICAL
4
5
DC 5V
6
1 POWER LED
This LED will illuminate when connected to an AC wall outlet.
2 OPTICAL LINK LED
The LED will illuminate when the optical cable is connected and
has successfully detected and communicated data between the
Transmitter and Receiver. If the LED is not illuminated then check
that the fiber optic cable is properly connected and that the
cable itself is undamaged.
3 HDMI LINK LED
This LED will illuminate when the Transmitter unit is receiving a HDMI
signal from the source device.
4 HDMI IN
Connect to an HDMI input source such as a DVD or Blu-ray player
with a HDMI cable.
5 OPTICAL
Connect the SC-SC multi-mode optical cable to the Transmitter
and Receiver units.
6 DC 5V
Connect to the power adaptor included in the package to an AC
wall outlet for power supply.
2
6.2 Receiver Front and Rear Panels
OPTICAL
LINK
HDMI OUT
POWER
HDMI
LINK
1 2 3
OPTICAL
4
5
DC 5V
6
1 POWER LED
This LED will illuminate when connected to an AC wall outlet..
2 OPTICAL LINK LED
The LED will illuminate when the optical cable is connected and
has successfully detected and communicated data between the
Transmitter and Receiver. If the LED is not illuminated then check
that the fiber optic cable is properly connected and that the
cable itself is undamaged.
3 HDMI LINK LED
This LED will illuminate when the device is successfully communicating
with the display.
4 HDMI OUT
Connect to a HDMI Display device, such as a TV or monitor, with a
HDMI cable.
5 OPTICAL
Connect the SC-SC multi-mode fiber optical cable to the
Transmitter and Receiver units.
6 DC 5V
Connect to the power adaptor included in the package from the
AC wall outlet for power supply.
3
7. CONNECTION DIAGRAM
DVD or Blu-ray Player
HDMI Input
OPTICAL
LINK
HDMI IN
Power
Supply
POWER
TX
HDMI
LINK
OPTICAL
DC 5V
Fiber Optical Cable
(up to 300m)
Power
Supply
RX
OPTICAL
DC 5V
OPTICAL
LINK HDMI OUT
POWER
HDMI
LINK
HDMI Output
Display
4
8. SPECIFICATIONS
Video Bandwidth
340 MHz/10.2 Gbps
Optical Fiber
OM3 50/125um, SC-SC connector
Transmitter
Input Port
1×HDMI
Output Port
1×Multi-mode Fiber Optical
Receiver
Input Port
1×Multi-mode Fiber Optical
Output port
1×HDMI
Resolution Support
PC: VGA ~ WUXGA
HD: 3D & 480i ~ 1080p (50/60 Hz), 4K×2K
(24/25/30 Hz)
HDMI In/Out Cable
Up to 10m (In) and 10m (Out) at 8-bit
Distance
Up to 6m (In) and 6m (Out) at 12-bit
Optical Cable Distance
Up to 300 Meters with OM3 50/125um
Optical Fiber Cable
Power Supply
5 V/2.6 A DC (US/EU standards, CE/FCC/
UL certified)
ESD Protection
Human Body Model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Dimensions
65.5mm (W)×125.5mm(D)×21.6mm(H)/
Each
Weight
200 g/Each
Chassis Material
Aluminum
Color
Black
Operating Temperature
0 °C ~ 40 °C
Storage Temperature
−20 ˚C ~ 60 ˚C / −4 ˚F ~ 140 ˚F
Relative Humidity
20 ~ 90 % RH (non-condensing)
Power Consumption
1.5 W/TX, 1.3 W/RX
5
9. ACRONYMS
ACRONYM
COMPLETE TERM
HDCP
High-bandwidth Digital Content Protection
HDMI
High-Definition multimedia Interface
6
CYPRESS TECHNOLOGY CO., LTD
Home page: http://www.cypress.com.tw
MPM-COHTX2RX2
Download PDF
Similar pages