IES-A3162GC - Mouser Electronics Ecuador

Industrial Ethernet Switch C1D2 DIN-Rail Managed Ethernet Switch
v1.0a / Jul, 2016
IES-A3162GC
Industrial C1D2/ATEX 18-port managed Ethernet switch with
16x10/100Base-T(X) and 2xGigabit combo ports, SFP socket
Industrial
Media Converter
Features
Industrial
Ethernet Switch
IES-A3162GC
Industrial
Device Server
▪ C1D2 and ATEX compliant for harsh industrial environments application
▪ World’s fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250
units of connection)
▪ Open-Ring support the other vendor’s ring technology in open architecture
▪ O-Chain allow multiple redundant network rings
▪ Support standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function
▪ STP/RSTP:2004/MSTP supported
▪ Support IPv6 new internet protocol version
▪ Support PTP Client (Precision Time Protocol) clock synchronization
▪ Provided HTTPS/SSH protocol to enhance network security
▪ Support Modbus/TCP protocol
▪ IGMP v2/v3 (IGMP snooping for support) filtering multicast traffic
▪ Port Trunking for easy of bandwidth management
▪ SNMP V1/V2c/V3 support for secured network management
▪ RMON for traffic monitoring
▪ Support LLDP protocol
▪ Support TACACS+ and 802.1x User Authentication for security
▪ Event notification through Syslog, Email, SNMP trap, and Relay Output
▪ Port lock to prevent access from unauthorized MAC address
▪ Windows utility (Open-Vision) support centralized management and configurable by
Web-based ,Telnet, Console (CLI)
▪ Support two Gigabit combo ports
▪ Rigid IP-30 housing design
▪ DIN-Rail and wall mounting enabled
Industrial Wireless
Access Point
Industrial Cellular
VPN Router
D esign ed for R u gged E xcellence
Network
Management Software
*NOTE: This function is available by request only
Accessories
IES-A3162GC is managed Redundant Ring Ethernet switch with 16x10/100Base-T(X) ports and 2xgigabit combo ports which is specifically designed for the
C1D2/ATEX certified with hazardous locations requirement. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250
units of connection), Open-Ring, O-Chain, MRP*NOTE and MSTP/RSTP:2004/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network
interruptions or temporary malfunctions with its fast recovery technology. Another Open-Ring technology is also supported which can applied for other vendor's
proprietary ring. O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone network,
O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust compound network
topology. O-Chain providing ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost-effectiveness in one set of network
redundancy topology. All function of IES-A3162GC can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the
wide operating temperature range from -40 to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highlymanaged and Fiber Ethernet in hazardous location application.
Industrial
M2M Gateway
Introduction
1-289
Industrial Ethernet Switch C1D2 DIN-Rail Managed Ethernet Switch
v1.0a / Jul, 2016
Open-Vision
ORing’s switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for user
to manage and monitor all of industrial Ethernet switches on the industrial network.
Optic Fiber
IP Camera
Industrial Ethernet Switch
1
IP Camera
Control Center
IES-A3162GC
Oil & Gas Application
Oil Well Pumper
Network connection
Topology View
Monitoring and Configuration interface
Dimensions
(Unit=mm)
1-290
w w w.oring - net wo rk in g.co m
Industrial Ethernet Switch C1D2 DIN-Rail Managed Ethernet Switch
v1.0a / Jul, 2016
ORing Switch Model
Industrial
Ethernet Switch
Specifications
IES-A3162GC
Physical Ports
10/100 Base-T(X) Ports in RJ45
16
Auto MDI/MDIX
2
Switch Properties
Security Features
Software Features
Network Redundancy
Warning / Monitoring System
RS-232 Serial Console Port
Accessories
Store-and-Forward
Switching latency: 9 us
Switching bandwidth: 7.2Gbps
Max. Number of Available VLANs: 4096
IGMP multicast groups: 1024
Port rate limiting: User Define
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Supports Q-in-Q VLAN for performance & security to expand the VLAN space
Radius centralized password management
SNMP V1/V2c/V3 encrypted authentication and access security
HTTPS/SSH enhance network security
STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
SNTP for synchronizing of clocks over network
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support
Modbus TCP
O-Ring
Open-Ring
O-Chain
MRP*NOTE
STP / RSTP:2004 / MSTP
Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support
RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1
Industrial
M2M Gateway
Processing
Industrial Cellular
VPN Router
4
Industrial Wireless
Access Point
Priority Queues
Ethernet Standards
Industrial
Device Server
MAC Table
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1D-2004 for RSTP:2004 (Rapid Spanning Tree Protocol 2004)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
8192 MAC addresses
Industrial
Media Converter
Technology
LED indicators
Green : Power LED x 3
R.M. Indicator
Green : Indicate system operated in O-Ring master mode
O-Ring Indicator
Green : Indicate system operated in O-Ring mode
Fault Iindicator
Amber : Indicate unexpected event occurred
10/100Base-T(X) RJ45 port Indicator
Green for port Link/Act. Amber for Duplex/Collision
Network
Management Software
Power indicator
*NOTE: This function is available by request only
D esign ed for R u gged E xcellence
1-291
Industrial Ethernet Switch C1D2 DIN-Rail Managed Ethernet Switch
v1.0a / Jul, 2016
10/100/1000Base-T(X) RJ45 Port Indicator
Green for port Link/Act. Amber for 100Mbps indicator
100/1000Base-X SFP Port Indicator
Green for port Link/Act.
Fault contact
Relay
Relay output to carry capacity of 1A at 24VDC
Power
Industrial Ethernet Switch
1
Redundant Input Power
Dual DC inputs. 12 ~ 48VDC on 6-pin terminal block
Power Consumption (Typ.)
12 Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present on terminal block
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
96.4(W)x108.5(D)x154(H) mm (3.8 x 4.27 x 6.06 inch)
Weight (g)
1220g
Environmental
Storage Temperature
-40 to 85oC (-40 to 185oF)
Operating Temperature
-40 to 70oC (-40 to 158oF)
Operating Humidity
5% to 95% Non-condensing
Regulatory approvals
EMC
EN 55022, EN 55024(CE EMC), FCC, EN 61000-6-2, EN 61000-6-4,IEC 61000-3-2 ,IEC 61000-3-3
EMI
CISPR 22, EN 55011, FCC Part 15B Class A
EMS
EN 61000-4-2 (ESD), EN 61000-4-3 (RS), EN 61000-4-4 (EFT), EN 61000-4-5 (Surge), EN 61000-4-6 (CS),
EN 61000-4-8 (PFMF), EN 61000-4-11 (DIP)
-40 to 70oC (-40 to 158oF)
Shock
IEC60068-2-27
Free Fall
IEC 60068-2-31 (IEC 60068-2-32)
Vibration
IEC60068-2-6
Safety
EN60950-1, UL/cUL Class 1 Division 2 Group A/B/C/D, ATEX Class 1 Zone 2
Warranty
5 years
Ordering Information
I E S -A 3 A A B CC
10/100Base-T(X)
Port Number
Code Definition
Option
Available
Model
- 16: 16 ports
Model Name
IES-A3162GC
Packing List
‧IES-A3162GC x 1
‧DIN-Rail Kit x 1
‧ORing Tool CD x 1
‧Wall-mount Kit x 2
‧Quick Installation Guide x 1
‧Console Cable x 1
1-292
w w w.oring - net wo rk in g.co m
Additional Port Number
- 2: 2 ports
Additional Port Type
- GC: Gigabit combo port
Description
Industrial C1D2/ATEX 18-port managed Ethernet switch with 16x10/100Base-T(X) and 2xGigabit combo ports, SFP socket
Optional Accessories (Can be purchased separately)
‧Open-Vision M500 : Powerful Network Management Windows Utility Suit, 500 IP devices
‧DR-45 series : 45 Watts DIN-Rail power supply
‧DR-120 series : 120 Watts DIN-Rail power supply
‧SFP100 series : 100Mbps SFP optical transceiver
‧SFP 1G series : 1Gbps SFP optical transceiver
‧DR-75 series : 75 Watts DIN-Rail power supply
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
ORing:
IES-A3162GC
Download PDF
Similar pages