40L555 * Series 50L555 * Series 55L555 * Series

OWNER'S MANUAL
LED TV with Android™
40L555 * Series
50L555 * Series
55L555 * Series
Owner's Record
You will find the model number and serial number on
the back of the TV. Record these numbers in the spaces
provided below. Refer to them whenever you call upon
your TOSHIBA dealer regarding this product.
Model number:
Serial number:
TOSHIBA GULF FZE
TOSHIBA EL ARABY VISUAL & APPLIANCES MARKETING COMPANY
405055L5550Series_EEEV_En.indd 1
TD/TE
VX1A00321800
27/05/18 13:14:53
Welcome to TOSHIBA
• Thank you for purchasing this TOSHIBA LED TV. This manual will help you use the exciting features of your
new TV.
• Instructions in this manual are based on using the remote control.
• You also can use the controls on the TV if they have the same name as those referred to on the remote
control.
• Please read all safety and operating instructions in this manual carefully, and keep this manual for future
reference.
• “LED TV” means LCD Panel with LED Backlight.
Contents
Introduction / Getting started ................................... 3
Pedestal stand Assembling........................................... 3
Connecting an aerial ....................................................... 7
Exploring your new TV ................................................... 7
TV panel controls ............................................................. 8
Learning about the remote control ........................... 9
Connecting the AC power cord to your TV
(for 40L555* Series / 50L555* Series) .................10
Tuning the TV for the first time .................................11
Basic Operations ..................................................... 13
Turning the TV on...........................................................13
Displaying the home screen.......................................13
Watching the TV .............................................................13
Using the TV’s features ............................................ 14
Learning about the menu system ............................14
Using the Quick Menu ..................................................15
Watching TV programmes ..........................................15
Programming channels into the TV’s channel
memory ........................................................................16
Picture adjustment ........................................................19
Stereo and Bilingual transmissions
(for DTV programmes) .............................................23
Stereo and Bilingual transmissions
(for ATV programmes) .............................................24
Sound adjustment .........................................................25
Other features settings.................................................26
Digital on-screen information and
Programme Guide..........................................................29
Digital settings – parental control............................30
Digital settings – Channel Options ..........................31
Digital settings – other settings ................................32
Selecting the video input source to view ..............33
Setting the Colour System ..........................................33
Labelling video input sources ...................................33
Channel List (for ATV) ...................................................33
Confirming software version .....................................33
Over-the-air Upgrade ...................................................34
Resetting the TV..............................................................34
Teletext...............................................................................35
Back connections ...........................................................37
Selecting the PC/HDMI 1 Audio mode ...................39
Setting the HDMI 1 Audio mode ..............................39
Connecting a computer ...............................................39
Using the PC Settings ...................................................40
Using the Easy remote control to operate
the TV .............................................................................41
Using the Android features ...................................... 42
About the home screen ...............................................42
Notes on using the Android features ......................44
Starting an application.................................................44
Customizing the desktop ............................................45
Customizing the Dock bar ..........................................45
Grouping shortcut icons..............................................45
Uninstalling an application or widget ....................45
Using the Screen Mirroring function ......................46
Connecting a network ..................................................46
Setting up the wireless LAN .......................................47
Checking and changing other settings ..................48
Updating the system.....................................................51
Using the TV remote control to operate ................51
Using the Media Player ........................................... 52
Starting Media Player....................................................52
Exiting Media Player ......................................................53
Viewing photo files ........................................................53
Playing music files ..........................................................55
Viewing video files ........................................................56
Playing content from a smartphone or tablet .....59
Using the HDMI CEC Function ................................... 61
HDMI CEC Control connection ..................................61
HDMI CEC functions ......................................................61
Reference section ................................................... 63
APPENDIX..........................................................................63
Troubleshooting .............................................................66
Broadcast system ...........................................................67
Specifications...................................................................67
2
405055L5550Series_EEEV_En.indd 2
27/05/18 13:14:53
Introduction / Getting started
Pedestal stand Assembling
CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a flat,
cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the
surface and assemble as indicated.
NOTE:
Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel.
1
3
4
2
for 40L555* Series / 50L555* Series
M5 × 4
M5 × 4
for 55L555* Series
M5 × 4
Warning: Ensure the power cable is not pinched
when attaching the pedestal stand as this could
cause an electric shock.
3
405055L5550Series_EEEV_En.indd 3
27/05/18 13:14:53
Introduction / Getting started
Important Safety Instructions
Be sure to observe the following instructions and
precautions to ensure safe use of this TV.
Installation
1) WARNING: To prevent injury, this apparatus
must be securely attached to a stable surface/
wall in accordance with the installation
instructions.
Install the TV in a horizontal, stable location.
Attach the TV to the stand with the mounting
screw.
• If the TV is not installed securely, it may lean or
fall over and cause an injury.
• To prevent injury, use the exclusive optional
stand or wall-hanging bracket to install this
TV on a stable surface or wall securely in
accordance with a qualified technician.
Screw hole
Top view
2) Never place the TV in an unstabilized location
such as on a shaky table, incline or location
subject to vibration.
• Only use cabinets or stands recommended by
the TV manufacturer.
• Only use furniture that can safely support the
TV.
• Ensure that the TV is not hanging over the
edge of the supporting furniture.
• Never place the TV on tall furniture (for
example, cupboards or bookcases) without
anchoring both the furniture and the TV to a
suitable support.
• Never stand the TV on cloth or other material
placed between the TV and supporting
furniture.
The TV may drop or fall off, which may cause an
injury or damage.
3) Never stand or climb on the TV.
• Educate children about the dangers of
climbing on furniture to reach the TV or its
controls.
Be especially careful in households with children
to prevent them through climbing on top of
the TV. It may move, fall over, break, become
damaged or cause an injury.
4) Always connect the power plug to an
appropriate electrical outlet equipped with
110-240V AC, 50/60Hz.
Never use the TV outside the specified voltage
range. It may cause a fire or an electric shock.
About the fuse
In a three pin earthing-type, the fuse fitted in
this plug is approved by ASTA or BSI to BS1362.
It should only be replaced by a correctly rated
and approved type and the fuse cover must be
refitted.
About the use
• Make sure to insert the plugs firmly, when
plugging the AC power cord into the TV set
end and wall outlet end.
• Make sure to hold the plug, when unplugging
the AC power cord.
• Never use other cord except for supplied AC
power cord, and never use the supplied power
cord for any other purpose.
5) Never insert or remove the power plug with
wet hands.
This may cause an electric shock.
6) Never block or cover the slots and openings in
the cabinet.
• Never place the TV so that it is facing upward
or on its side.
• Never place the TV in a closet, bookcase or
other similar area where the ventilation is
poor.
• Never drape a newspaper, tablecloth or
curtain on the TV.
• When installing the TV against a wall, always
keep the TV at least 10 cm away from the wall.
• Never place the TV on a soft unstable surface,
such as a carpet, or a cushion.
The inside of this TV will overheat if the
ventilation holes are covered, blocked or sealed,
which may result in a fire.
7) Never place the TV near a heater or in direct
sunlight.
The surface of the cabinet or power cord may
melt and result in a fire or an electric shock.
8) Never place the TV in an area exposed to high
humidity levels, such as in a bathroom or
close to a humidifier.
This may cause a fire or an electric shock.
9) Never place the TV next to a stove where it
will be exposed to oil, smoke, or steam, or in
a location where there is a large quantity of
dust.
This may cause a fire or an electric shock.
4
405055L5550Series_EEEV_En.indd 4
27/05/18 13:14:53
Introduction / Getting started
10) Precautions for moving the TV
• When moving the TV, be sure to remove the
plug from the wall outlet and disconnect the
aerial cable and audio/video cables, any steady
ties and mounting screw. A fire or an electric
shock may result if the power cord is damaged.
• When carrying the TV, at least two people are
needed. Be sure to carry it upright.
• Never carry the TV with the screen facing up or
down.
11) Precautions for installing on outdoor aerial
An outside aerial system should not be located
in the vicinity of overhead power lines, or other
electric light or power circuits.
If the aerial falls down or drops, it may cause an
injury or an electric shock.
Use
1) Never place hot objects or open flame sources,
such as lighted candles or nightlights, on or
close to the TV.
High temperatures can melt plastic and lead to
fires.
2) The apparatus shall not be exposed to
dripping or splashing and that no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
When liquids are spilled or small items are
dropped inside the TV, this may cause a fire or an
electric shock.
If small objects drop inside the TV, turn off the
TV and remove the power plug from the outlet
immediately and contact a service technician.
3) Never insert objects (metal or paper) or pour
water inside the TV through ventilation holes
and other openings.
These items may cause a fire or an electric shock.
If these objects are inserted inside the TV, turn
off the TV and remove the power plug from
the outlet immediately and contact a service
technician. Be especially careful that children do
not insert objects in the TV.
4) When the TV will not be used for a long period
of time, such as during vacation or travel,
remove the power plug from the wall outlet
for safety.
• The TV is not completely disconnected from
the power supply line, as minute current is
consumed even when the ! Power switch is
turned off.
• The Mains plug or an appliance coupler is
used as the disconnect device, therefore
the disconnect device shall remain readily
operable.
5) Never pull on the power cord when removing
the plug from the wall outlet.
Always hold the plug firmly when removing it. If
the power cord is yanked, the cord may become
damaged and a fire or an electric shock may
occur.
6) Never cut, break, modify, twist, bunch up
or bent the cord or apply excessive force or
tension to it.
Never place heavy objects on the cord or allow
it to overheat as this may cause damage, a fire or
an electric shock. Contact a service technician if
the power cord is damaged.
7) If there is thunder or lightning, never touch
the aerial cable or other connected cables.
You may suffer an electric shock.
8) Turn off the TV before unplugging the power
cord.
Failure to do so may cause a malfunction.
Service
1) Never repair, modify or disassemble the TV by
yourself.
It may cause a fire or an electric shock.
Consult a service technician for inspection and
repairs.
2) When a malfunction occurs, or if smoke or
an unusual odor comes from the TV, turn off
the TV and remove the power plug from the
outlet immediately.
Make sure that the smoke or smell has stopped,
then contact a service technician. If the TV is still
used in this condition, it may cause a fire or an
electric shock.
3) If the TV is dropped or the cabinet is broken,
turn off the TV and remove the power plug
from the outlet immediately.
If the TV has power in this condition, it may cause
a fire or an electric shock. If the cabinet is broken,
be careful when handling the TV to prevent an
injury.
Contact a service technician for inspection and
repair.
4) When the TV reaches the end of its useful life,
ask a qualified service technician to properly
dispose of the TV.
5
405055L5550Series_EEEV_En.indd 5
27/05/18 13:14:54
Introduction / Getting started
Cleaning
CAUTION: Avoid using chemicals (such as air
refreshers, cleaning agents, etc.) on or near
the TV pedestal. Studies indicate that plastics
may weaken and crack over time from the
combination effects of chemical agents and
mechanical stress (such as weight of TV). Failure
to follow these instructions could result in
serious injury and/or permanent damage to TV
and TV pedestal.
1) Remove the power plug before cleaning.
Never use solvents such as benzine or thinner to
clean the TV.
• These solvents may distort the cabinet or
damage its finish.
• If rubber or vinyl products remain in contact
with the TV for a long time, a stain may result.
If the cabinet becomes dirty, clean it with a soft,
dry cloth.
When cleaning the surface of the LCD display,
wipe the panel surface gently with a soft, dry
cloth.
2) Periodically disconnect the power plug from
the outlet and check it.
If dust has collected on the power plug
connectors, clean off the dust with a dry cloth.
This dust may cause a fire due to reduced
insulation on the plug.
Important information
5) About Interference
The LCD display may cause interference in image,
sound, etc. of other electronic equipment that
receives electromagnetic waves (e.g. AM radios
and video equipment).
6) About using under the low temperature places
If you use the TV in the room of 0°C or less,
the picture brightness may vary until the
LCD monitor warms up. This is not a sign of
malfunction.
7) When disposing of or transferring ownership
of the TV
Before disposing of or transferring ownership
of the TV, perform "Resetting the TV" (- page
34).
Exemptions
• TOSHIBA is not liable for any damage caused by
fires, natural disaster (such as thunder, earthquake,
etc.), acts by third parties, accidents, owner’s
misuse, or uses in other improper conditions.
• TOSHIBA is not liable for incidental damages
(such as profit loss or interruption in business,
modification or erasure of record data, etc.) caused
by use or inability to use of product.
• TOSHIBA is not liable for any damage caused
by neglect of the instructions described in the
owner’s manual.
• TOSHIBA is not liable for any damage caused by
misuse or malfunction through simultaneous use
of this product and the connected equipment.
1) About LCD screen
• If you have the LCD screen facing to the sun,
the LCD screen will be damaged. Be aware of
locating the TV close to a window or outdoors.
• Never press the LCD screen strongly or scratch
it, and never put anything on it. These actions
will damage the LCD screen.
2) About cabinet and LCD screen
Never spray volatile compounds such as
insecticide on the cabinet and LCD screen.
This may cause a discolouration or damage the
cabinet and LCD screen.
3) About afterimage
If a still picture is displayed, an afterimage may
remain on the screen, however it will disappear.
This is not a sign of malfunction.
4) Some pixels of the screen do not light up
The LCD display panel is manufactured using an
extremely high level of precision technology,
however sometimes some pixels of the screen
may be missing picture elements or have
luminous spots. This is not sign of malfunction.
6
405055L5550Series_EEEV_En.indd 6
27/05/18 13:14:54
Introduction / Getting started
Connecting an aerial
Optimum reception of colour requires a good signal
and will generally mean that an outdoor aerial must
be used.
The exact type and positioning of the aerial will
depend upon your particular area.
Your TOSHIBA dealer or service personnel can best
advise you on which aerial to use in your area.
Before connecting the aerial cable, turn off all main
power switches.
TV remote control
Remove the battery cover.
Insert two R03 (AAA) batteries matching the –/+
polarities of the battery to the –/+ marks inside the
battery compartment.
VHF and/or UHF aerial
Media Recorder
TV back view
IN
OUT
Aerial cable
(75 7 coaxial) (not supplied)
300 7 twin-lead feeder
Aerial adaptor
(not supplied)
75 7
aerial
terminal
75 7 coaxial cable
Plug
(not supplied)
75 7 aerial
terminal
Cautions:
• Dispose of batteries in a designated disposal area.
Batteries must not be exposed to excessive heat such
as sunshine, fire or the like.
• Attention should be drawn to the environmental
aspects of battery disposal.
• Never mix battery types or combine used batteries
with new ones.
NOTE:
• If the remote control does not operate correctly, or if
the operating range becomes reduced, replace both
batteries with new ones.
• If the batteries are dead or if you will not use the
remote control for a long time, remove the batteries
to prevent battery acid from leaking into the battery
compartment.
Effective range
Exploring your new TV
Installing the remote control batteries
Easy remote control
Remove the battery cover.
Insert two LR6 (AA) batteries matching the –/+
polarities of the battery to the –/+ marks inside the
battery compartment.
within 5 m
7
405055L5550Series_EEEV_En.indd 7
27/05/18 13:14:54
Introduction / Getting started
• You can connect a keyboard or mouse to the
USB port.
• If you are using a wireless mouse only, you
cannot enter text. Use also a keyboard.
NOTE:
Do not connect a USB device when the TV is
performing operations other than reception
(setup, software update, etc.).
TV panel controls
• You can operate your TV using the buttons on
the side panel or the remote control. The back of
the panel provide the terminal connections to
connect other equipment to your TV
(- pages 37– 41).
• For the use of each control, see the pages in
brackets.
6
TV front view
7
o HDMI 2 - 3 (input terminals) — HighDefinition Multimedia Interface input receives
digital audio and uncompressed digital video
from an HDMI device (- page 37).
RESET — Press this button with a fine-pointed
object to reboot forcibly.
TV back view
Left side view
1
7
2
3
4
8
5
9
16
6
10
15
Sample Illustration: 40L555* Series front and side
panel controls and connection
1 ! (power LED) — Power indicator
(- page 13).
2 ! (power on/standby) — Press to turn the TV
on/ standby (- page 13).
3 2 – + (volume) — These buttons adjust the
volume level.
U u (mode up/down) — These buttons select
programme position or input source.
4 p / o (programme position or input source)
— When external input list is displayed, an
input source can be selected.
5 USB 1-2 (input terminals) — Insert your USB
storage device (photo, video and music)
(- page 52).
• Connect a USB HDD to the USB 1 port if it needs
power supply.
14
11
13 12
Sample Illustration: 40L555* Series front and side
panel controls and connection
8
9
o (1) COMPONENT / VIDEO INPUT (input
terminals) — High-definition component video
and standard (analogue) stereo audio inputs, or
standard (composite) video and standard stereo
audio inputs (- page 37).
o (2) (video 2 input terminals) — Standard
video and standard stereo audio input (- page
37).
8
405055L5550Series_EEEV_En.indd 8
27/05/18 13:14:54
Introduction / Getting started
10 A (aerial input terminal) — Aerial signal input
(- page 7).
11 o PC/HDMI 1 (AUDIO) (input terminal) —
PC audio input terminal is shared with HDMI
analogue audio input terminal, and their use can
be configured in the PREFERENCES menu (page 39).
12 O DIGITAL AUDIO (OPTICAL) (output
terminal) — For use when connecting an
amplifier with optical type digital audio input
(- page 37).
13 O AUDIO (output terminals) — Standard
audio outputs (FIXED) (- page 37).
14 o RGB/PC (input terminal) — For use when
connecting a personal computer (PC) (- page
39).
15 LAN port — For use when connecting to
network (- page 46).
16 o HDMI 1 (input terminals) — HighDefinition Multimedia Interface input receives
digital audio and uncompressed digital video
from an HDMI device (- page 37).
Learning about the remote control
TV remote control
2
3
4
1
5
6
7
1
2
3
4
5
6
7
8
9
10
11
8
9
11
12
10
14
13
14
15
16
13
15
12
16
17
18
19
18
19
20
20
21
22
17
23
21
22
23
Power on/Standby
Input source selection
To select the Intelligent Scene Optimiser mode
To select ATV or DTV
Subtitle on/off
Stereo/Bilingual selection
Number buttons (0-9)
Switch the Audio Description On/Off
To access the analogue or digital Channel List
Volume – + (These buttons adjust the volume
level.)
•
To display on-screen information
•
Initial/Index function for Teletext
Sound Mute (This button turns the sound off/
on.)
To access the Quick Menu
Programme position U u
To access the Menu
To display the digital on-screen Programme
Guide
• Menu  
• OK
To return to the previous menu
EXIT
Teletext control buttons (Four coloured buttons:
Red, Green, Yellow, Blue)
Teletext on/off
Picture still
When using the Media Player (
z Z)
When using the Teletext (
)
9
405055L5550Series_EEEV_En.indd 9
27/05/18 13:14:54
Introduction / Getting started
Easy remote control
1
1
2
3
4
5
6
2
3
Power on/Standby
The home screen appears.
Volume – + (These buttons adjust the volume
level.)
Pointing key
To return to the previous menu
To access the Home
To access the Menu
Using the pointing key
Move the pointer
Tilt the pointing key to move the screen pointer in
the tilted direction.
Pointing key
4
5
6
Select/Confirm
Press the pointing key to confirm the selection.
Hold and move
Press, hold, and then tilt the pointing key to hold
and move the selected item.
Connecting the AC power cord to your TV (for 40L555* Series / 50L555* Series)
1
Push the AC power cord plug firmly into the
AC IN connector on the back of the TV.
AC power code (supplied)
10
405055L5550Series_EEEV_En.indd 10
27/05/18 13:14:55
Introduction / Getting started
When the Android setup is complete, the
Country setup screen appears.
Tuning the TV for the first time
Before switching on the TV, put your decoder and
media recorder to standby, if they are connected,
and ensure that the aerial is connected.
• To set up the network simultaneously, refer to "To
connect the TV to a home network - Wired" (page 46) or "To connect the TV to a network
Wireless" (- page 46) beforehand to prepare
the TV.
1
Proceed to the TV initial setup.
NOTE:
If you press the 1 button on the Easy remote
control to start the operation, the Home screen
appears and the setup ends.
Unknown
Press the 1 button on the TV remote control.
The Welcome screen will appear. This screen
will appear the first time that the TV is switched
on.
Use the Easy remote control in steps 2 and 3.
NOTE:
Certain expressions used in the GUI of this product may
not correspond to the TV (e.g., touch/phone/tablet).
2
3
• The actual screen may differ in appearance.
To set up the TV Application next, select the
icon on the screen, and press the pointing key to
start the TV.
Select a language, and press the pointing key.
Select Start, and press the pointing key.
Hereinafter follow the on-screen instructions to
continue setting up.
Configure the wireless LAN
Set up the settings. You can skip this step
wireless LAN and configure the settings
later.(- page 47)

Set up
Google™
If you do not have a Google
account, a screen appears
prompting you to register an
account.

Confirm
the Google
positioning
Read the on-screen
explanation. If you will not use
the function or allow access,
uncheck the box.

Confirm the
Select and change the items if
time zone,
necessary.
date and time
Use the TV remote control from Step 4 onwards.
4
Press ,,  or  to select the country and
press OK.
• When the message screen is displayed, select
Next and press OK.
• If you select Indonesia, the Postal Code input
screen is displayed. Use the Number buttons
to enter your postal code, select Next, and
then press OK.
NOTE:
Depending on the broadcast environment, this TV
may not be able to receive certain broadcasting
in whole or in part. Any guarantee of reception of
broadcasting is hereby disclaimed.
When this TV cannot receive digital broadcasting,
please select the ATV (analogue channel) as the
Tuning Mode.
For region where digital broadcasting is not
available or cannot be received because of the
difference in broadcasting system, please use the
ATV (analogue channel) as the Tuning Mode.

Select  to skip this step. Set
Set the owner
this later on if necessary.
11
405055L5550Series_EEEV_En.indd 11
27/05/18 13:14:55
Introduction / Getting started
5
Press ,,  or  to select the Primary
Subtitle Language, Secondary Subtitle
Language, Primary Audio Language or
Secondary Audio Language.
9
Press OK to display the Auto Tuning setup
menu.
Auto Tuning
Tuning Mode
Quick Setup
DTV and ATV
Scan Type
Quick Scan
Auto Signal Booster
Primary Subtitle Language
English
Secondary Subtitle Language
English
Primary Audio Language
English
Secondary Audio Language
English
On
Start Scan
10 Select Start Scan and press OK to start the
Next
automatic search.
6
Select Next and press OK to display the
Location menu.
Press  or  to select Store or Home.
You can select either Home or Store mode.
Home is recommended for normal home use.
Select Store when using a TV for displaying in
a shop, etc.
You must allow the television to complete
the search.
Auto Tuning
Found
Progress
Location
To use the TV for displaying in a store showroom,
please select [Store]. [Home] mode is recommended
for normal use.
Store
DTV
ATV
1%
0
Waiting...
Frequency : 218.000 MHz
Home
Store mode:
• A confirmation menu will appear.
• Intelligent AutoView menu is not available.
7
The television will start to search for available
DTV and/or ATV channels. The progress bar will
indicate the scan status.
Press OK to display the Intelligent AutoView
menu (- page 21).
Press  or  to select Yes or No.
Intelligent AutoView
Intelligent AutoView mode automatically adjusts picture settings
to suit ambient light conditions. Do you wish to enable Intelligent
When the search is complete, the search result
is displayed.
The Auto Tuning screen will display the total
number of services found.
11 Press  or to view the DTV (digital channel)
or ATV (analogue channel) lists.
12 Press or  to move through the list to select
a channel and press OK to view.
AutoView mode?
Yes
No
• When you select No, skip to step 9.
8
Press OK to display the Lighting Type menu.
Press  or  to select Fluorescent Light or
Light Bulb.
• Set the ambient light environment to help
Intelligent Auto View function more
effectively (- page 21).
Lighting Type
To use the TV under the bluish lighting environment, please select
[Fluorescent Light]. To use the TV under the orangish lighting
environment, please select [Light Bulb].
Fluorescent Light
In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the
signal may be weak, so the station order can be
changed using ATV Manual Tuning.
Remember:
Press TV at any time to select between ATV and
DTV modes.
NOTE:
The time will be set automatically by transmission
but can be advanced or decreased by using Local
Time Setting in the DTV Settings screen.
NOTE:
The Quick Setup menu can also be displayed from
the SETUP menu at any time while watching TV
broadcasts.
Light Bulb
12
405055L5550Series_EEEV_En.indd 12
27/05/18 13:14:55
Basic Operations
You can enjoy visual or audio content, applications,
and TV broadcasts (or external input) by starting TV
Application.
Home screen
Unknown
• The actual screen may differ in appearance.
Turning the TV on
Switching on the TV
Connect the power cord to a wall outlet, the
! power indicator lights in red (standby mode).
Using the TV remote control
1
Press 1 on the TV remote control, the ! power
indicator lights in green.
The TV Application starts up, and the TV
broadcast (or external input) appears.
NOTE:
If you watch black and white programmes when the
Colour System mode is set to “PAL” (factory set),
colour noise may appear on the screen. In this case
select the appropriate Colour System (For the system
of each country or region, refer to pages 17, 67).
Using the Easy remote control
1
Switching off the TV
1
Press 1 on the remote control or ! on the TV
left side panel to switch to the standby mode.
NOTE:
• When the TV will not be used for a long period of
time, such as during vacation or travel, remove the
power plug from the wall outlet.
• The TV will automatically turn off in 15 minutes
based on No Signal Power Down settings (page 28) if no signal is detected.
The TV will automatically turn itself off after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If power
is going to be off for a long time and you are going
to be away from your TV, unplug the power cord to
prevent the TV from turning on in your absence.
Displaying the home screen
If you press
on the Easy remote control while
viewing the TV broadcast (or external input), the
home screen appears.
• For operations on the home screen, refer to page
42.
Watching the TV
To start the TV Application and switch to the TV
broadcast (or external input) while on the home
screen, perform either of the following:
and confirm.
• Select the
Unknown
Press 1 on the Easy remote control, and the !
power indicator lights up in green.
• When Quick Start (- page 50) is set
to Off, the TOSHIBA logo will be displayed,
followed by the home screen.
Using the TV itself
1
Press ! on the TV left side panel, and the !
power indicator lights up in green.
The previously displayed screen appears.
• The actual screen may differ in appearance.
NOTE
If BACK on the TV remote control is pressed twice, the
TV Application closes.
13
405055L5550Series_EEEV_En.indd 13
27/05/18 13:14:55
Using the TV’s features
Use the TV remote control while watching TV broadcasts (or external input).
Learning about the menu system
We suggest you familiarize yourself with the display charts before using the menu system:
• Press MENU to display menu, then press  or  to select main menu headings.
• Press  or  to select an item.
• Press  or  to select or adjust setting.
• Press OK to display the next menu.
Displaying the menu chart
PICTURE
PICTURE
Picture Settings
Lighting Type
3D Colour Management
Fluorescent Light
Off
PREFERENCES
Base Colour Adjustment
On
Active Backlight Control
Picture Analyser
PREFERENCES
Teletext
Teletext Language
Auto
4
Display Settings
AV Connection
Energy Saving Settings
SOUND
Blue Screen
On
SOUND
MTS
Auto
Dual
Dual 1
Balance
Sound Mode
Advanced Sound Settings
0
Auto
Audio Distortion Control
TV Mounting
On
Stand
Dynamic Range Control
Low
SETUP
SETUP
Country
Singapore
Auto Tuning
Audio Level Offset
ATV Manual Tuning
Audio Description
DTV Manual Tuning
DTV Settings
Quick Setup
Location
APPLICATIONS
Home
System Information
Reset TV
APPLICATIONS
Guide
Media Player
Programme Timers
On Timer
Sleep Timer
Continuous Viewing Timer
00:00
Off
System Settings
NOTE:
• In the video input mode (VIDEO, HDMI and PC), Country, Auto Tuning, ATV Manual Tuning, DTV Manual
Tuning and Quick Setup are not available.
• If you do not make a selection for a while, the menu display disappears automatically.
• If you want to close the menu display instantly, press EXIT or MENU.
• To return to the previous menu, press BACK.
• In the PC input mode, PC Settings is available in the Display Settings menu (- page 40).
• When you use the colour management function (- page 23), you can select the Base Colour Adjustment
menu.
14
405055L5550Series_EEEV_En.indd 14
27/05/18 13:14:56
Using the TV’s features
Using the Quick Menu
Watching TV programmes
Quick Menu helps you access some options quickly,
such as Picture Mode, Media Player etc.
Press QUICK to display the Quick Menu and use 
or  to select the option.
Selecting the country
Quick Menu
Picture Mode
Standard
Sound Mode
Picture Size
Dynamic
You can select a country. If the Country setting is
changed, the Quick Setup starts again.
1
Press MENU, then press  or  to display
SETUP menu.
2
Press  or  to select Country and press OK.
More Information
Channel Options
Media Player
Sleep Timer
Power Bass Booster
SETUP
00:00
Country
Off
Singapore
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
NOTE:
Quick Menu items are different depending on the
current mode.
DTV Settings
Quick Setup
Location
Home
System Information
Reset TV
Quick menu item
Description
Picture Mode
- page 21.
Sound Mode
- page 25.
Picture Size
- page 19
More Information
- page 29
Channel Options
- page 31
Media Player
- page 52
Sleep Timer
- page 27.
Power Bass booster
- page 25
Signal Booster
- page 17
Interval Time
- page 54.
Repeat
- pages 54, 55, 57.
TV Application
- page 50
System Settings
- page 44
PICTURE
- page 19.
SOUND
- page 25.
Subtitle Encode Type
- page 58.
Quick Setup confirmation screen will appear.
3
4
Press  or  to select Yes, and press OK.
Press ,,  or  to select the desired
country.
Once the Country has been selected, you will
proceed to the Primary Subtitle Language,
Secondary Subtitle Language, Primary Audio
Language and Secondary Audio Language
settings, and then to the Auto Tuning settings.
(- page 12).
NOTE:
Depending on the broadcast environment, this TV may
not be able to receive certain broadcasting in whole or
in part. Any guarantee of reception of broadcasting is
hereby disclaimed.
When this TV cannot receive digital broadcasting,
please select the ATV (analogue channel) as the Tuning
Mode.
For region where digital broadcasting is not available
or cannot be received because of the difference in
broadcasting system, please use the ATV (analogue
channel) as the Tuning Mode.
15
405055L5550Series_EEEV_En.indd 15
27/05/18 13:14:56
Using the TV’s features
Press or  to select Tuning Mode, Scan Type
or Auto Signal Booster and press  or  to
select an option.
Tuning Mode:
Press  or  to select DTV and ATV, DTV or
ATV.
Scan Type (only for Tuning Mode DTV and ATV
or DTV mode):
Press  or  to select Quick Scan or Full Scan.
The Quick Scan is a simplified version of the
Full Scan that is designed to complete in less
time.
NOTE:
If you select Full Scan, it takes a long time.
Changing the position
Enter the desired position number using the
Number buttons on the remote control.
You can also change the position by using PU or Pu.
The position will be displayed on the screen.
NOTE:
Changing positions between different format channels
takes several seconds.
Displaying the on-screen information
To display on-screen information such as channel,
input mode or stereo/mono signal, press
. Press
again to cancel.
Auto Signal Booster:
Press  or  to select On or Off. If the receiving
signal is weak/strong and the picture is noisy,
the picture may be improved when using this
function.
Programming channels into the TV’s channel
memory
• First, use the Auto Tuning function to preset all
the active channels in your area automatically.
Then, arrange the preset channels with the
Manual Tuning function so that you can tune into
only desired channels.
• Use the Manual Tuning operation if desired
channels cannot be preset with the Auto Tuning
or if you would like to preset channels to specific
position numbers one by one.
3
The television will start to search for all available
DTV and/or ATV services.
You must allow the television to complete
the search.
When the search is complete, the Auto Tuning
screen will display the services found.
Auto Tuning
1
Press or  to select Start Scan and press OK.
From the SETUP menu, press  or  to select
Auto Tuning.
SETUP
Singapore
Country
Auto Tuning
ATV Manual Tuning
ATV Manual Tuning
1
From the SETUP menu, press  or  to select
ATV Manual Tuning.
2
Press OK to display the ATV Manual Tuning
menu.
Press  or  to select the programme position
you want to arrange.
DTV Manual Tuning
DTV Settings
Quick Setup
Home
Location
ATV Manual Tuning
System Information
Pos.
Reset TV
Label
0
2
1
ABCD
Press OK.
2
EFGH
The Auto Tuning menu will appear.
3
IJKL
4
MNOP
Auto Tuning
5
Tuning Mode
DTV and ATV
Scan Type
Quick Scan
Auto Signal Booster
On
6
7
Start Scan
16
405055L5550Series_EEEV_En.indd 16
27/05/18 13:14:56
Using the TV’s features
3
Press OK to display the breakdown menu.
J. Label
Station labels appear on the right side of the
programme position display each time you
turn on the TV, select a channel, or press .
To change or create station labels:
1) Press  or  repeatedly to select a
character for the first space, then press 
or .
Press  or  to select an item, then press  or
 to select the item as shown below.
ATV Manual Tuning
Position
1 B/G P
A
C 1
C
B
E
D
0
G
F
On
I
H
J
A. Position selection
B. System (Sound) (- page 67)
C. Colour System (- page 67)
P : PAL (factory set),S : SECAM,
N4 : NTSC 4.43 (MHz), N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is abnormal,
the colour system selection may have
malfunctioned, or sound system selection is
wrong. In such a case, select another colour
and/or sound system (- page 67).
D. Position skip selection
Press  or  to turn the position skip option
on “8” or off “(”. The position will then be
skipped when you select channels with PU
or Pu. The “8” mark will appear beside a
position number when you use the Number
button on the remote control.
E. Signal Class
The channel classification.
F. Channel
The channel number on which a station is
being broadcast.
G. Channel search operation
Press  to search up the band or  to search
down the band.
Press  or  repeatedly until your desired
channel is displayed.
When a station is found, it will be displayed.
NEVER PRESS ANY OTHER BUTTONS WHILE
THE SET IS TUNING.
H.Manual Fine Tuning
Press  or  until better picture and sound
are obtained.
I. Signal Booster
If the receiving signal is weak/strong and the
picture is noisy, the picture may be improved
when using this function.
Press the  or  to turn the Signal Booster
On or Off.
(blank space)
2) Repeat step 1) to enter the rest of the
characters. If you would like a blank space
in the label name, you must choose a blank
space from the list of characters.
Press OK to store your settings.
Sorting positions
TV channels may be moved and stored to the
position of your choice.
1
From the SETUP menu, press  or  to select
ATV Manual Tuning.
2
With the list of channels now showing, press 
or  to select the channel you want to move
and press .
ATV Manual Tuning
Pos.
Label
0
1
ABCD
2
EFGH
3
IJKL
4
MNOP
5
6
7
3
Use  or  to move through the list to your
preferred position. As you do so, the other
channels will move to make room.
4
Press  to store your move.
• Repeat as necessary, and then press EXIT.
17
405055L5550Series_EEEV_En.indd 17
27/05/18 13:14:56
Using the TV’s features
DTV Manual Tuning
DTV Settings
NOTE:
The content of this menu varies depending on the DTV
input that is currently selected.
This feature is available for service engineers or can
be used for direct channel entry if the multiplex
channel is known.
Channels
1
From the SETUP menu, press  or  to select
DTV Settings and press OK.
1
2
Select Channels and press OK.
From the SETUP menu, press  or  to select
DTV Manual Tuning and press OK.
The channel order may be changed to suit your
personal preference.
DTV Settings
DTV Manual Tuning
Signal Strength
Channels
WEAK
Quality
AVERAGE
GOOD
Local Time Setting
Dynamic Scan
25
Frequency
Over-the-air Upgrade
8 MHz
Signal Booster
On
3
Start Scan
2
Enter the multiplex number, using  or  to
increase or decrease the number.
3
Select Start Scan and press OK.
DTV Manual Tuning
1 New Channels – Total 6
Name
1
ABC ONE
2
ABC TWO
7
ABC THREE
40
ABC 24
51
ABCi
For your convenience, you can jump to specific
places in the list by Line Number Jump.
Channels
Line No.
Pos.
The television will automatically search for that
multiplex.
Pos.
On
Signal Booster
506.0 MHz
Bandwidth
1/10
Name
1
ABC ONE
2
ABC TWO
7
ABC THREE
40
ABC 24
51
ABCi
822
AA
823
AC
Type
Type
When the multiplex is found, any channels
that are not currently in the channel list will be
added and the channel information at the top
of the screen will be updated. ("♦" icon appears
on the New column of the newly added
channels.)
4
PIN Setting
Parental Control
100%
Channel
New
Subtitle and Audio
STRONG
Repeat as necessary. Press EXIT to finish.
Line Number Jump—Use the Number buttons
(0-9) to input the line number you want to
select and press OK.
Renumber—Press the RED button to renumber
the highlighted channel. Edit the channel
number using the Number buttons and press
OK. If the position number you input already
exists, a confirmation window will appear.
Move—Press the GREEN button to activate
the Move feature. Press the  or  buttons to
select the channel you wish to move and press
OK to check.
If you wish to move multiple channels at once,
select another channel and check in the same
way. Repeat as necessary.
Once all desired channels have been checked,
press the  or  buttons to place the focus
at the position to which you wish to move the
channels. The channels will be inserted above
the highlighted channel. Press the GREEN
button to execute the move.
18
405055L5550Series_EEEV_En.indd 18
27/05/18 13:14:56
Using the TV’s features
Picture adjustment
Channels
Line No.
Pos.
1/10
Name
1
ABC ONE
2
ABC TWO
7
ABC THREE
40
ABC 24
51
ABCi
822
AA
823
AC
Type
Sort—Press the YELLOW button.
A confirmation window will appear. Press  or
 to select Yes and press OK.
Dynamic Scan
If the broadcast information has changed in
your Digital Broadcasting receiving area, the TV
detects the changes and add the new channels
automatically if updated. If you do not wish for the
TV to detect changes and prompt you to rescan, you
should set this feature to “Off”.
1
From the SETUP menu, press  or  to select
DTV Settings and press OK.
2
Press  or  to select Dynamic Scan and press
 or  to select On or Off.
Signal Booster
• Most of the picture controls and functions are
available. However, features not available will be
greyed out or hidden.
Selecting the Picture Size
1
2
Press QUICK to display the Quick Menu.
3
Press  or  to select the appropriate picture
size, and then press OK.
Press  or  to select Picture Size, and then
press OK.
Wide
Use this setting when watching a wide-screen DVD,
widescreen video tape or a 16:9 broadcast (when
available). Due to the range of wide-screen formats
(16:9, 14:9, 20:9 etc.), you may see bars on the top
and bottom of the screen.
4:3
Use this setting to view a true 4:3 broadcast.
You can set the Signal Booster to On or Off.
1
From the SETUP menu, press  or  to select
DTV Settings and press OK.
2
Press  or  to select Signal Booster and
press OK.
3
Press  or  to select Channel and press the
RED button to select On or Off.
Super Live
This setting will enlarge a 4:3 image to fit the screen
by stretching the image horizontally and vertically,
holding better proportions at the centre of the
image. Some distortion may occur.
Setting the Location
You can select either Home or Store mode. Home
is recommended for normal home use. Select Store
when using a TV for displaying in a shop, etc.
1
From the SETUP menu, press  or  to select
Location.
2
Press  or  to select Home or Store.
Cinema
When watching “all sides panel format” films/video
tapes, this setting will eliminate or reduce the black
bars on all the sides of the screen by zooming in and
selecting the image without distortion.
19
405055L5550Series_EEEV_En.indd 19
27/05/18 13:14:56
Using the TV’s features
Subtitle
Dot by Dot
When subtitles are included on a letterbox format
broadcast, this setting will raise the picture so that
most of the text is displayed.
“Dot by Dot” is a non-scaling display. Depending on
the input signal format, the picture is displayed with
side panels and/or bars at the top and bottom (e.g.
VGA input source).
Subtitle
14:9
Use this setting when watching a 14:9 broadcast.
Normal
Sets the size to full screen without changing the
aspect ratio when watching a video stored on a USB
device.
Native
This setting will display the image correctly without
distortion or picture clipping.
Zoom
Sets the size to full screen keeping the 21:9
circularity ratio when watching a video stored on a
USB device.
PC Normal
Use this setting for PC connected via HDMI or RGB/
PC terminal when receiving PC signal format. This
setting will display the image correctly without
distortion or picture clipping.
PC Wide
Use this setting for PC connected via HDMI or RGB/
PC terminal when receiving PC signal format. This
setting will display the image without picture
clipping.
NOTE:
• Using the special functions to change the size of
the displayed image (e.g. changing the height/
width ratio) for the purpose of public display or
commercial gain may infringe on copyright laws.
• If the aspect ratio of the selected format is different
from the one of the TV transmission or video
programme, it can cause a difference in vision.
Change to the correct aspect ratio picture size.
• When using the PC connected via HDMI or RGB/
PC terminal, the moving image quality may be
deteriorated.
20
405055L5550Series_EEEV_En.indd 20
27/05/18 13:14:57
Using the TV’s features
2
Using the picture still
• Press to freeze the picture.
Even if an image is frozen on the TV screen, the
pictures are running on the input source. Audio
continues to be output as well.
To return to a moving picture, press again.
(Moving)
Using the Intelligent Scene Optimiser
You can easily select the best picture and sound
mode for what you are watching.
• Sound is affected when the Sound Mode is set to
Auto (- page 25).
1
Press
Picture Settings
Picture Mode
Backlight
Contrast
( S till)
NOTE:
If you use this function except for the purpose of your
private viewing and listening, it may infringe the
copyright protected by the copyright laws.
.
The Intelligent Scene Optimiser window will
appear at the bottom of the screen.
2
Press  or to select the best mode for what
you are watching, and press OK.
• Auto mode automatically sets the best picture
and sound mode for what you are watching.
• The modes that can be selected differ
according to the input and what you are
watching.
NOTE:
The Intelligent Scene Optimiser you select affects
the current input only. You can select a different
Intelligent Scene Optimiser for each input.
Standard
70
100
Brightness
0
Colour
0
Tint
Sharpness
0
0
Contrast Booster
Middle
3
Press  or  to select your desired Picture
Mode.
NOTE:
The Picture Mode you select affects the current input
only. You can select a different Picture Mode for each
input.
Activating the picture preferences
You can customise current Picture Mode settings as
desired. For example, while selecting "Dynamic", if
you change the following items, such as Backlight,
Contrast, Brightness, Colour, Tint, Sharpness, and
the Picture Settings items, your new setting are
saved for "Dynamic" Picture Mode.
1
From the Picture Settings menu, press 
or  to select either Backlight, Contrast,
Brightness, Colour, Tint or Sharpness.
2
Press  or  to adjust the settings as desired.
Setting the Contrast Booster
Contrast Booster improves the definition of dark
areas of the picture.
1
Activating the Picture Mode
From the Picture Settings menu, press  or 
to select Contrast Booster.
Picture Settings
This TV offers the choice of personalising the picture
style.
Intelligent AutoView, Dynamic, Standard and
Mild are preset options and affect many features/
settings within the TV.
1
Press  or  to select Picture Mode.
Picture Mode
Backlight
Contrast
From the PICTURE menu, press  or  to
select Picture Settings and press OK.
Brightness
0
Colour
0
Tint
Sharpness
0
Contrast Booster
2
Standard
70
100
0
Middle
Press  or  to select Middle, High, Off or
Low.
PICTURE
Picture Settings
Lighting Type
3D Colour Management
Fluorescent Light
Off
Base Colour Adjustment
Active Backlight Control
On
Picture Analyser
21
405055L5550Series_EEEV_En.indd 21
27/05/18 13:14:57
Using the TV’s features
Using the Cinema Mode
Activating the Noise Reduction (NR)
A movie film’s picture runs at 24 frames a second,
whereas movie software such as DVD, etc., that you
enjoy watching on TV at home runs at 30 (NTSC)
or 25 (PAL) frames a second. To convert this signal
to reproduce a smooth motion and picture quality,
select the On mode.
Effective signal and setup conditions:
• When the Video input mode is selected.
• When the input signal format is 480i, 576i or 1080i
signals.
If the receiving signal of MPEG is a mosquito
(grained) noise depending on the compression and
conversion, the picture is weak and the picture is
blurry, the picture may be improved when using this
function.
1
1
Noise Reduction
From the Picture Settings menu, press  or 
to select Cinema Mode.
2
Press  or  to select On or Off.
NOTE:
When a DVD movie with subtitle is playing back, this
mode may not work correctly.
2
Adjusting the Colour Temperature
Colour Temperature increases the warmth or
coolness of the picture by setting the red, green or
blue tint.
1
From the Picture Settings menu, press  or 
to select Colour Temperature, then press OK.
2
Press  or  to select Auto, Cool, Natural, or
Warm to suit your preference.
Colour Temperature
Colour Temperature
0
Blue Level
0
0
Auto Clean
On
MPEG NR
DNR
Auto
Auto
Select Auto Clean, and then press  or  to
select On or Off.
Off mode :
MPEG NR menu and DNR menu are available.
• MPEG NR mode: Low, Middle, High or Off
• DNR (Digital Noise Reduction) mode: Low,
Middle, High or Off
Resetting the Picture Settings
This feature resets the Picture Settings to the
factory settings.
NOTE:
If no picture settings have been changed, Reset is not
available.
1
From the Picture Settings menu, press  or 
to select Reset, and then press OK.
2
A confirmation message will appear. Press  or
 to select Yes, and then press OK.
Cool
Red Level
Green Level
From the Picture Settings menu, press  or 
to select Noise Reduction, and then press OK.
Reset
Using the Lighting Type
3
Press  or  to select Red Level, Green Level
or Blue Level, then press  or  to adjust the
setting as required.
Resetting the Colour Temperature
This function resets your colour temperature
settings to the factory settings.
1
From the Colour Temperature menu, press 
or  to select Reset, then press OK.
2
A confirmation message will appear. Press  or
 to select Yes, and then press OK.
Set the ambient light environment to help
Intelligent Auto View function more effectively.
• This can be set when Picture Mode is set to
Intelligent Auto View.
1
From the PICTURE menu, press  or  to
select Lighting Type.
2
Press  or  to select Fluorescent Light or
Light Bulb.
22
405055L5550Series_EEEV_En.indd 22
27/05/18 13:14:57
Using the TV’s features
Adjusting the Colour Management
Using the Active Backlight Control
You can adjust the picture colour quality by
selecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
In order to improve screen visibility, the Active
Backlight Control sets the screen brightness
automatically during dark scenes.
• This function cannot be selected in the following
cases.
• When the input source is PC.
• When Intelligent Scene Optimiser is set to
Game.
• When Picture Mode is set to Intelligent
AutoView.
1
From the PICTURE menu, press  or  to
select 3D Colour Management.
2
Press  or  to select On.
3D Colour Management
On
3
Press  or  to select Base Colour
Adjustment.
1
4
From the PICTURE menu, press  or  to
select Active Backlight Control.
Press OK, then press  or  to select an item
you want to adjust.
2
Press  or  to select On or Off.
Using the Picture Analyser
Base Colour Adjustment
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
Hue
Saturation
Brightness
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
5
Press , then press  or  to select Hue,
Saturation or Brightness.
6
Press  or  to adjust the settings as required.
Red
Hue
Saturation
Brightness
0
0
0
NOTE:
If you select 3D Colour Management Off mode, this
mode is not available.
Resetting the Base Colour Adjustment
Displays the picture histogram.
1
From the PICTURE menu, press  or  to
select Picture Analyser.
Histogram: Shows the bright and dark areas of
the displayed picture, and the distribution of
colours in a graph.
Contrast Curve: Shows the correction curve,
which improves the expressive feel of the
displayed picture, in a graph.
To close the Picture Analyser screen, press
EXIT.
Stereo and Bilingual transmissions
(for DTV programmes)
For stereo or dual mono broadcasts, press s and
use  or  to select settings.
Mode Display
Pressing 
The reset function adjusts the base colour
adjustment to the factory settings.
d Stereo
Stereo S Left S Right
1
j Dual mono
Dual 1 S Dual 2 S Dual
2
3
From the Base Colour Adjustment menu, press
 or  to select Reset.
Press OK.
A confirmation message will appear. Press  or
 to select Yes, and then press OK.
e Mono
Surround
–
–
For multi-audio track broadcasts, press s
repeatedly to change the audio language (- page
32).
23
405055L5550Series_EEEV_En.indd 23
27/05/18 13:14:57
Using the TV’s features
Stereo and Bilingual transmissions
(for ATV programmes)
Selecting the stereo programmes
1
Setting the MTS (Multi-channel TV Sound)
When a stereo programme is received,
d Stereo appears.
4
Auto mode
The MTS Auto mode automatically recognize stereo/
bilingual programmes depending on the broadcast
signal.
1
2
Press MENU, and then press  or  to display
the SOUND menu.
ABCD
Stereo
Press s to select the stereo/monaural mode.
d Stereo and e Mono appear cyclically on
the screen.
Selecting the bilingual programmes
SOUND
MTS
Auto
When a bilingual programme is received,
j Dual appears.
2
Press s to select the sound to be heard. The
sound differs according to the transmission
system: NICAM or German stereo/bilingual
broadcast.
Dual 1
Dual
Balance
Sound Mode
Advanced Sound Settings
1
0
Auto
Audio Distortion Control
TV Mounting
On
Stand
Dynamic Range Control
Low
Audio Level Offset
Sound to be heard
Audio Description
Display
2
Press  or  to select MTS, and then press 
or  to select Auto or Mono.
NICAM
German stereo/
bilingual broadcast
j Dual 1
Sub I sound
Main sound
Mono mode
J Dual 2
Sub II sound
Sub sound
If you experience noise or poor reception of any
stereo/bilingual programme, set the MTS mode to
Mono.
Noise will be reduced and reception may improve.
NOTE:
If you experience noise with a particular programme
on whose channel reception is usually good, try setting
MTS mode to Auto, then press s to switch to e
Mono (monaural).
e Mono
Main sound
—
NOTE:
These settings are not stored in the TV memory.
Selecting the monaural programmes
If sound distortion, interruptions or silence arises in
the low sound volume level, setting the e Mono 2
mode will mitigate the problem.
Selecting the Dual 1 or Dual 2 mode
1
You can hear only Dual 1 or Dual 2 sound selected,
whenever bilingual programmes are received.
2
1
From the SOUND menu, press  or  to select
Dual.
2
Press  or  to select Dual 1 or Dual 2.
NOTE:
• When the MTS setting is in Mono mode, the Dual
menu is not selectable.
• The Dual menu setting status remains even if the TV
is turned off.
When a monaural programme is received, e
Mono appears.
Press s to select a monaural mode that is
easy to hear. e Mono 1 and e Mono 2 appear
cyclically to the screen.
NOTE:
On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching on the
e Mono 2 mode.
24
405055L5550Series_EEEV_En.indd 24
27/05/18 13:14:57
Using the TV’s features
Sound adjustment
Adjusting the sound balance
1
From the SOUND menu, press  or  to select
the Balance.
2
Press  or  to adjust the settings as desired.
Using the Sound Mode
Choose your preferred Sound Mode (Auto,
Dynamic, Natural or Clear Voice).
1
From the SOUND menu, press  or  to select
the Sound Mode.
2
Press  or  to select Auto, Dynamic, Natural
or Clear Voice.
Adjusting the sound quality
You can adjust the basic sound quality.
NOTE:
This can be set when Sound Mode is set to Dynamic,
Natural or Clear Voice.
1
Using the Power Bass Booster
Power Bass Booster helps to create rich bass.
1
From the Advanced Sound Settings menu,
press  or  to select Power Bass Booster.
2
Press  or  to select Normal, Super or Off.
NOTE:
This may not have an effect, depending on the audio
source.
Resetting the Advanced Sound Settings
This feature resets the Advanced Sound Settings
to the factory settings.
NOTE:
If no sound settings have been changed, Reset is not
available.
1
From the Advanced Sound Settings menu,
press  or  to select Reset, and then press
OK.
2
A confirmation message will appear. Press  or
 to select Yes, and then press OK.
From the Advanced Sound Settings menu,
press  or  to select Equaliser, and then
press OK.
Using the Audio Distortion Control
2
Press  or  to select Graphic Equaliser, and
then press OK.
1
3
Press  or  to select a frequency band, and
press the  or  to adjust the level for that
band.
Prevents audio distortion.
SOUND
Using the Power Sound Equaliser
1
From the Equaliser menu, press  or  to
select Power Sound Equaliser.
2
Press  or  to select On or Off.
From the SOUND menu, press  or  to select
the Audio Distortion Control.
MTS
Auto
Dual
Dual 1
Balance
Sound Mode
Advanced Sound Settings
0
Auto
Audio Distortion Control
TV Mounting
On
Stand
Dynamic Range Control
Low
Audio Level Offset
Audio Description
Using the Surround
Surround help to create rich and wider sound from
stereo sound sources.
1
From the Advanced Sound Settings menu,
press  or  to select Surround.
2
Press  or  to select On or Off.
2
Press  or  to select On or Off.
Selecting the TV Mounting (Wall/Stand)
TV Mounting feature can provide an appropriate
sound depending on the TV installation type, that
TV is installed on a wall or a TV stand.
1
From the SOUND menu, press  or  to select
TV Mounting.
2
Press  or  to select Wall or Stand.
25
405055L5550Series_EEEV_En.indd 25
27/05/18 13:14:57
Using the TV’s features
Using the Dynamic Range Control
Audio Description
This feature allows control of compression for Dolby
Digital and Dolby Digital Plus.
Audio Description is an additional narrative sound
track for visually impaired individuals to understand
and enjoy the story line more fully. The letters
AD will be displayed in the channel banner when
programmes contain AD content.
1
From the SOUND menu, press  or  to select
the Dynamic Range Control.
2
Press  or  to select High or Low.
NOTE:
When the Dynamic Range Control is set to High, the
Audio Distortion Control changes to Off.
1
From the SOUND menu, press  or  to select
Audio Description and press OK.
2
Press  or  to select Audio Description and
press  or  to select On.
Using the Audio Level Offset
Sometimes there can be large changes in volume
when switching from a DTV 5.1ch to a DTV 2ch,
an ATV channel, or an external input. Using the
Audio Level Offset feature reduces these volume
differences.
1
Set the volume level usually used when
watching a DTV 5.1ch programme.
2
Tune to a channel which is DTV 2ch, ATV or an
external input.
3
From the SOUND menu, press  or  to select
Audio Level Offset and press OK.
4
Press  or  to select an option, and then
press  or  to adjust the volume level.
Audio Level Offset
DTV 2ch
ATV
External Input
0
0
0
Audio Description
Audio Description
Mixing Level
On
80
3
To adjust the level of the audio description
sound to the main sound, select Mixing Level
and press  or .
NOTE:
This may be unavailable depending on the conditions.
Other features settings
Programme Timers – digital only
This feature will set the television to go to a specific
channel at a certain time. It can be used to view
a particular programme, or by setting the mode
to daily or weekly, can be used to view a series of
programmes.
1
NOTE:
• The available item changes depending on the
current input source. For example, while watching
a DTV 2ch programme, only DTV 2ch is available
and the other two items are greyed out in the menu.
This allows you to easily adjust according to each
condition.
• When watching a DTV 5.1ch programme, this
feature is not available.
From the APPLICATIONS menu, press  or 
to select Programme Timers, and press OK.
APPLICATIONS
Guide
Media Player
Programme Timers
On Timer
Sleep Timer
Continuous Viewing Timer
System Settings
00:00
Off
The list of Programme Timers appear on
screen.
2
Select an empty line, and press OK.
The Edit timer menu appear on screen.
26
405055L5550Series_EEEV_En.indd 26
27/05/18 13:14:58
Using the TV’s features
3
Press  or  to go through the list adding the
details of the programme by using the number
buttons and  or  to make selections.
Edit Timer
Volume: Select the volume level that will be set
when the TV turns on.
4
6:00 Wed, 10 Apr 2015
Channel
000ABC2
Date
Wed, 10 Apr 2015
To cancel the On Timer
Start Time
07:00
Repeat
Once
1
Delete Timer
2
Set Timer
4
When all of the details have been entered,
select Set Timer and press OK to save the timer.
PLEASE NOTE:
When a timed programme is about to start, an
information screen will appear offering the option of
watching or cancelling the programme.
It will only be possible to create or edit programme
timers for the currently tuned DTV input.
When all the details have been entered, select
Done and press OK to start the timer.
From the On Timer menu, press  or  to
select Enable On Timer.
Press  or  to select Off, and then select
Done and press OK.
NOTE:
The TV will automatically turn itself off after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
Setting the Sleep Timer
The Sleep Timer is especially useful if you want the
TV to turn itself off after a selected period of time.
Setting the On Timer menu
1
From the APPLICATIONS menu, press  or 
to select Sleep Timer.
The feature allows you to set the TV to turn on
automatically to a preset position or input.
2
Press the Number buttons (0-9) to enter
the amount of time until the TV turns off.
Alternatively, press  or  to adjust the time in
blocks of 10 minutes up to 12 hours.
3
Press EXIT to start the timer.
1
From the APPLICATIONS menu, press  or 
to select On Timer, and then press OK.
2
Press  or  to select Enable On Timer, and
then press  or  to select On.
To cancel the Sleep Timer, enter all zeros for the
step 2.
On Timer
Enable On Timer
On
Power On Time
00:00
Repeat
Once
Input
DTV
Position
Volume
55
30
Done
3
Press  or  to go through the list adding the
details of the On Timer by using the Number
buttons and  or  to make selections and
press OK.
Power On Time: Set the time you prefer with
the number buttons.
Repeat: Select the desired On Timer operation
(Once, Every Day, Mon- Fri, Mon-Sat, SatSun).
Input: Select a video input source (ATV, DTV,
EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3 or PC).
Position: Set the position that will be tuned
when the TV turns on.
Using the Continuous Viewing Timer
To prevent watching TV continuously for long
periods of time, you can set a message to appear
that suggests that the viewer takes a break. This
is especially useful for stopping children from
watching TV for long periods of time.
1
From the APPLICATIONS menu, press  or 
to select Continuous Viewing Timer.
2
Press  or  to select 60 min, 120 min, 180
min or Off.
When the set time has passed, a message
suggesting the viewer takes a break appears.
Press OK, BACK or EXIT to clear the message.
NOTE:
• If the power is turned off before the set amount of
time has passed, the timer is reset.
• If the set amount of time is changed, the timer is
reset.
27
405055L5550Series_EEEV_En.indd 27
27/05/18 13:14:58
Using the TV’s features
Using the Auto Format
Eco Mode
When Auto Format is On and the TV receives a
digital broadcast or a true HDMI signal picture, it
will automatically be displayed in the appropriate
format according to the signal information,
irrespective of the TV’s settings.
In Eco Mode, the screen becomes slightly darker and
you will be able to reduce power consumption.
NOTE:
The Backlight adjustment is not available in Eco
Mode.
1
From the Display Settings in the
PREFERENCES menu, press  or  to select
Auto Format.
Display Settings
2
Auto Format
Off
4:3 Stretch
PC Settings
Off
Press  or  to select On or Off.
Activating the 4:3 Stretch
When 4:3 stretch is activated, this function will
switch 4:3 format programmes into a full screen
picture.
1
From the Display Settings menu, press  or 
to select 4:3 Stretch.
1
From the PREFERENCES menu, press  or 
until Energy Saving Settings is selected, and
then press OK.
2
Press  or  to select Eco Mode and press 
or  to select On or Off.
Setting No Signal Power Down
The TV will automatically turn itself off after 15
minutes when no signal is detected. You can change
the setting to Off for the following purposes:
• Low signal strength of analog channel (no signal
detection).
• Only Audio L/R is connected to an external
input in order to listen to music through the TV
speakers.
1
From the PREFERENCES menu, press  or 
until Energy Saving Settings is selected, and
then press OK.
2
Press  or  to select No Signal Power Down,
and then press OK.
2
Press  or  to select On or Off.
NOTE:
This feature is not available when Auto Format is set
to Off.
Activating Blue Screen
When Blue Screen is set to On, the screen will turn
blue and the sound will be muted when no signal is
received.
1
From the PREFERENCES menu, press  or  to
until Blue Screen is selected.
2
Press  or  to select On or Off.
NOTE:
Some external inputs may not mute the sound.
3
Press  or  to select the item you want to
change and press  or  to select On or Off.
NOTE:
• Default setting is all On.
• A warning message will appear 1 minute before
turning off.
Setting the Power Saving Indicator
You can display the current power saving status.
1
From the PREFERENCES menu, press  or 
until Energy Saving Settings is selected, and
then press OK.
2
Press  or  to select Power Saving Indicator
and press  or  to select On or Off.
Press
when the Power Saving Indicator is
On to display the Saving Level.
• The longer the Saving Level display bar is, the
higher the power save effect is.
• The saving level is also displayed when the
Picture Mode or Backlight settings are
changed.
28
405055L5550Series_EEEV_En.indd 28
27/05/18 13:14:58
Using the TV’s features
Digital on-screen information and
Programme Guide
Event info
When viewing in digital mode, the on-screen
information and programme guide provide access
to programme details for all available channels.
Icon
HD, SD
Description
Video format
(HD, SD)
Video Aspect
Teletext
16:9, 4:3
Subtitle
(Single, Multi)
Audio track
(Single, Multi)
Information
1
Press
, the information screen will appear
giving details of the channel and programme
currently being viewed.
Display Example
888
4 – 18
(G, PG, PG13, NC16,
M18, R21)
Parental rating
7:00 Fri, 25 Apr 2015
ABCD EFG
Encrypted
AD English
Timer info
Now
MLB Young’s two-run triple leads AL over NL
6:00- 8:00
AD 18
15 min left
World News and Sports
8:00- 9:00
HD 16:9
Reminder
* Also displayed when Later is selected on the
Dynamic Scan confirmation screen.
Power Saving Level
Low
High
Next
Scroll
2
Press  or  to select the “Now” or “Next”
information guide.
To display More Information
1
2
Genre icons
One of the following Genre icons is displayed,
depending on the type of programme being
broadcast.
• The Genre icon displayed is based on information
received with the broadcast.
Icon
Genre name
Press QUICK to open the Quick Menu.
Press  or  to select More Information and
press OK.
Movie
News
On-screen Information icons
Icon
Service
info
8
Description
Service type
(TV, Radio, Text)
Skip
Entertainment
Sports
Children's
Signal strength
Audio info
Locked status
Music
Update*
Arts
e
d
Mono
J
Dual mono
Stereo
Factual
Education
Surround
Dolby Digital
Dolby Digital Plus Audio Coding
HE-AAC
AD
Audio Description
Lifestyle
Special
29
405055L5550Series_EEEV_En.indd 29
27/05/18 13:14:58
Using the TV’s features
Guide
Digital settings – parental control
1
In order to prevent viewing of unsuitable films and
programmes, channels and menus can be locked in
digital mode. These can then only be accessed with
a security code PIN.
Select the on-screen guide by pressing GUIDE,
and the Guide screen will appear highlighting
details of the channel and programme currently
being viewed.
This may take a few moments to appear.
Tue 22
TV
Parental PIN Setup
5:48 Tue, 22 Apr 2015
6:00
6:30
1 ABC HDTV
World Business Today
2 ABC1
Seven Wonders of Anclent Rome
3 ABC2
ITV Morning News
4 ABC3
7:00
7:30
Big Brother‫ތ‬s Little Brother
45 Battlefield Detectives
8:00
ITV Morning News
Balairiory
ITV Morning...
8:30
World Business...
Hope & Faith1
World News
Hope & Faith
Hope & Faith
Seven Wonders of Anclent Rome
Hope & Faith
6 ABC ONE
ABC News 24
ABC News 24
ABC News 24
7 ABC TWO
Kickstart Natural Born Dealers
Zoo Story
Animal Cops...
Animal Cops...
Go, Diego, Go!
World News Today
World News Today
Hope & Faith
vets in Hong Kong
World News Today
9 ABC NEWS 24
Big Brother Live
10 ABCi
vets in ABC
Go, Diego, Go!
vets in Hong Kong
45 vets in ABC epsode 12
11 ABBC Channel
World‫ތ‬s Toughest
12 TF1 HD
Zoo Story
13 ABCD 2 HD
Good Morning Sports Fan
Firnbles
From the SETUP menu, press  or  to select
DTV Settings and press OK.
Seven Wonders of Anclent Rome
5 ABC4
8 ABC THREE
1
Hope & Faith2
SETUP
World‫ތ‬s Toughest
World‫ތ‬s Toughest
Zoo Story
Zoo Story2
Animal Cops Houston
Singapore
Country
Auto Tuning
ABC world
ATV Manual Tuning
Zoo Story3
DTV Manual Tuning
Animal Cops...
DTV Settings
Quick Setup
NOTE:
Channels are displayed in groups by service type
(TV, Radio, Text). Pressing the TV button will
switch the service type.
Using the Guide
Button
Operation
 or 
Changes the channel.
 or 
Selects a programme.
PU / Pu
Displays the next or previous
page.
CC or cc
Changes the time.
Z or z
Changes the date.
System Information
Reset TV
2
Press  and  to select PIN Setting and press
OK.
3
Using the number buttons enter a four digit
number.
Once entered you will be prompted to confirm
by entering again.
PIN Setting
New PIN
Confirm PIN
The PIN number is now set.
Displays information about the
selected programme.
RED
button
Returns to the current time
display.
GREEN
button
Switches the time scale to 1.5 or
3 hours.
BLUE
button
Displays the Programme Timers
list.
You can set programme timers
from the Programme Timers list
(- page 26).
• Select a programme currently being broadcast
and press OK to switch to that programme.
• Select a programme that will be broadcast later
and press OK to open the Edit Timer menu .
• To close the Guide, press GUIDE.
Home
Location
If the PIN code has been set, when Country,
Auto Tuning, Quick Setup, Parental Control,
and Reset TV are executed, entering the PIN
will be necessary. “0000” is not acceptable.
To change or delete your PIN code:
1
In the DTV Settings menu, press  or  to
select PIN Setting menu and press OK.
2
Press the Number buttons to enter your four
digit PIN code.
3
Select Change PIN or Delete PIN and press OK.
Parental Control
The Parental Control feature allows you to block
programmes according to their rating levels. If a
PIN has been set, you will need to enter it before
adjusting the level.
30
405055L5550Series_EEEV_En.indd 30
27/05/18 13:14:59
Using the TV’s features
1
From the DTV Settings menu, press  or  to
select Parental Control and press OK.
2
Use the number buttons to enter your four digit
number.
3
Press  or  to adjust the setting.
• The setting values will differ depending on the
country selected for Country.
To view blocked programmes, enter the PIN. To
reactivate the Parental Control, turn the TV off
and then on again.
Digital settings – Channel Options
Selecting favourite channels
Skip channels
This feature allows you to set channels that will be
skipped when Pu or PU are used to tune.
1
Select the channel you want to skip in your
channel list.
2
From the Quick Menu, press  or  to select
Channel Options and press OK.
3
Press  or  repeatedly to highlight the skip
(8) box.
4
5
6
Press OK to select. A tick will appear in the box.
Favourite Channels creates a list of the digital
channels that are watched most. Four lists can be
created, they can be a mixture of television, radio
and text channels.
1
Select a channel you want to add to your
favourite list.
2
3
Press QUICK to open the Quick Menu.
4
Press  or  repeatedly to select the favourite
list ( ).
5
Press OK to select the ones required. A tick will
appear in the box as they are selected.
6
7
Repeat steps 1 through 5 for other channels.
Press  or  to select Channel Options and
press OK.
When all favourites have been selected, press
EXIT.
Favourite Channel Lists
1
2
Channel List
Favourites
6 M6
Press EXIT.
NOTE:
Skipped channels cannot be selected by Pu or PU
but still be accessed by direct number entry (when
tuned a 8 icon will be displayed in the banner to
indicate as a skipped channel).
Locking channels
Locking Channels stops the viewing of digital
channels, and they can only be accessed by entering
the PIN.
• A PIN must be set beforehand in PIN Setting(page 30).
1
Select the channel you want to lock in your
channel list.
2
From the Quick Menu, press  or  to select
Channel Options and press OK.
3
Press  or  repeatedly to select the lock (
box.
4
Press OK to select. A tick will appear in the box.
)
If a PIN has already been set, PIN entry will be
required to set the locked channels.
Press LIST to display Channel List.
Press  or  to select Favourite Channels. The
number of favourites available depends on how
many lists have been created.
Repeat steps 1 through 4 for other channels.
5
6
7
Repeat steps 1 through 4 for other channels.
Press EXIT.
From this point on, when any of the channels
in the Locked Channel list are selected, the PIN
must be entered before they can be accessed.
9 W9
11 NT1
31 PARIS PREMIERE
34 AB1
51 ITV1
3
Press  or  to select a channel and press OK
to watch.
31
405055L5550Series_EEEV_En.indd 31
27/05/18 13:14:59
Using the TV’s features
Digital settings – other settings
Subtitles
In digital mode, this feature will show subtitles on
the screen in the selected language provided they
are being broadcast.
1
From the DTV Settings menu, press  or  to
select Subtitle and Audio and press OK.
2
Press  or  to select Subtitle Display and
use  or  to select On or Off.
Local Time Setting
The clock that is displayed while watching the TV
can be set to display time information acquired
via the internet or time information acquired via a
digital broadcasting signal.
• When purchased, the TV displays time information
acquired via the internet.
1
From the DTV Settings menu, press  or  to
select Local Time Setting and press OK.
2
Press  or  to select Enable DTV Clock and
use  or  to select On.
Subtitle and Audio
Subtitle Display
Subtitle Type
Primary Subtitle Language
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
3
This changes the time displayed when watching
the TV to the time received via the digital
broadcasting signal. The time received by the
DTV Clock is displayed.
If the time needs to be adjusted according
to the area in which you live, perform the
following procedure.
Off
Normal
English
Vietnamese
English
Vietnamese
Press  or  to select Subtitle Type and
press  or  to select Normal or For Hard of
Hearing.
4
Press  or  to select Primary Subtitle
Language or Secondary Subtitle Language
and press  or  to select an option.
The SUBTITLE button can be used to select subtitle
on or off for the current channel only and to select
the subtitle language if more than one subtitle is
available.
Audio languages
3
Press  or  to select Offset and use  or 
to adjust the time.
The time can be adjusted in 30 minute
increments. The adjusted time is displayed in
Display Clock.
NOTE:
When Enable DTV Clock is set to On, the time that is
displayed on the information screen, the Guide screen
and other screens when watching the TV is the time
received via the digital broadcasting signal.
All timers operate according to time information
acquired via the internet.
This feature allows a programme or film to be
viewed with a choice of sound track language,
provided multiple language tracks are being
broadcast.
Signal Booster
1
1
From the Subtitle and Audio menu, press 
or  to select Primary Audio Language or
Secondary Audio Language and press  or 
to select an option.
If more than one sound track is available, use
the s button to select between them.
Postal Code
This is displayed only when Country is set to
Indonesia.
1
From the DTV Settings menu, press  or  to
select Postal Code and press OK.
2
Use the Number buttons to enter your postal
code.
Set the DTV Signal Booster.
From the DTV Settings menu, press  or  to
select Signal Booster and press OK.
The Signal Booster screen appears, and the
signal strength of each channel is displayed in
a bar.
2
Press  or  to select a channel to set the
Signal Booster for.
3
Press RED button.
Switch between On and Off for the Signal
Booster setting for the selected channel.
Repeat steps 2 and 3 to set Signal Booster for
each channel.
32
405055L5550Series_EEEV_En.indd 32
27/05/18 13:14:59
Using the TV’s features
Selecting the video input source to view
Labelling video input sources
1
These input labels are shown in the input selector.
You can label external inputs according to the
devices you have connected to the TV.
Press o on the remote control until the video
input mode list appears on the screen, then
press ,  or o to select appropriate input
source (or touch p / o and U or u on the TV
left side panel to select required input source
directly).
1
From the PREFERENCES menu, press  or 
to select AV Connection and press OK.
2
Press  or  to select Input Labelling and
press OK.
Inputs
TV
Input Labelling
VIDEO1
Input
VIDEO2
HDMI 1
HDMI 2
HDMI 3
PC
Label
-------
EXT 1
EXT 2
HDMI 1
HDMI 2
HDMI 3
PC
2
Press OK.
VIDEO1 (o (1), COMPONENT/VIDEO INPUT,
standard or component video input) ,
VIDEO2 (o (2), standard video input),
HDMI1, HDMI2 HDMI 3 (HDMI input),
PC (o RGB/PC, PC input)
NOTE:
If the Inputs list is displayed by pressing p / o and U
or u on the left side of the TV and U or u, the options
are DTV / VIDEO (1, 2) / HDMI (1, 2, 3) / PC / ATV.
3
Press  or  to select the item you want to
label and press  or  to select --, Amplifier,
Cable, DVD, Game, PC, Recorder, Satellite or
VCR, or press the RED button to turn on the
skip.
4
Repeat step 3 for other video inputs.
Channel List (for ATV)
1
Setting the Colour System
Press LIST. The Channel List will appear.
Channel List
This feature is available in Standard video
(composite) inputs mode.
1
Press MENU, and then press  or  to display
the SETUP menu.
1
ABC ONE
2
ABC TWO
3
ABC THREE
4
ABC 24
5
6
7
8
SETUP
Country
Singapore
Auto Tuning
2
ATV Manual Tuning
Press  or  to select a channel, and then
press OK.
DTV Manual Tuning
DTV Settings
Colour System
Auto
Quick Setup
Location
Confirming software version
Home
System Information
For ATV
Reset TV
1
2
Press  or  to select Colour System, and
then press  or  to select Auto, PAL, SECAM,
NTSC 4.43 or NTSC 3.58.
NOTE:
Confirm that Colour System is set to “Auto”. If not,
select “Auto” with  or .
From the SETUP menu, press  or  to select
System Information.
2
Press OK to display the software version.
NOTE:
The software version displayed is just for the
illustration.
33
405055L5550Series_EEEV_En.indd 33
27/05/18 13:14:59
Using the TV’s features
For DTV
This feature can be used to check the version of
software currently installed. When in DTV mode,
it includes additional diagnostic information such
as signal strength, signal quality, centre frequency,
modulation, etc
3
4
Press  or  to select Auto Upgrade.
Press  or  to select On or Off.
Searching for New Software
If preferred, software upgrades can be searched for
manually using Search for New Software.
1
From the SETUP menu, press  or  to select
System Information.
1
From the SETUP menu, press  or  to select
DTV Settings and press OK.
2
Press OK to display the Boot Code Version and
APP SW Version.
2
Press  or  to select Over-the-air Upgrade
menu and press OK.
3
Press  or  to select Auto Upgrade and press
 or  to select On.
Press  or  to select Search for New
Software.
Press OK. The television will automatically start
searching for a software upgrade, the progress
bar will move along the line.
If an upgrade is found, a message will be
displayed on the television. Follow the
instructions in the message. If no upgrades
are found, a screen will appear stating that no
upgrades are available.
System Information
TOSHIBA 2015
Model Name : L55 ID: XX
4
Boot Code Version: XXXX.XXXX.XXXX
APP SW Version: X.X.X.X.X (XXXXXX)
WEAK
AVERAGE
STRONG
CH22
GOOD
CH25
GOOD
CH16
GOOD
CH11
GOOD
3
For information about the signal quality of a
particular multiplex, press  or  to select that
multiplex.
4
Press OK for a screen showing detailed technical
information about the selected multiplex.
Over-the-air Upgrade
The Over-the-air Upgrade function is used when
a Software Upgrade is required for the TV in the
future.
NOTE:
• This function may not work depending on the
country selected for Country.
• The Over-the-air Upgrade may not function
correctly depending on the local area broadcasting
conditions, and the signal receiving environment.
5
Resetting the TV
Reset TV will reset all TV settings, including stored
channels, to their original factory values.
1
SETUP
Country
1
From the SETUP menu, press  or  to select
DTV Settings and press OK.
2
Press  or  to select Over-the-air Upgrade
menu and press OK.
Singapore
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Quick Setup
Location
Auto Upgrade
When Auto Upgrade is On, the television
automatically searches for upgrade information.
When new upgrade information is found, a
confirmation screen is displayed.
• Automatic searching is not performed when the
television is in standby.
From the SETUP menu, press  or  to select
Reset TV.
Home
System Information
Reset TV
2
Press OK to select.
A screen will appear warning that all settings
will be lost. Select Yes, and then press OK to
continue.
34
405055L5550Series_EEEV_En.indd 34
27/05/18 13:14:59
Using the TV’s features
Teletext
Sub-pages:
This TV has a multi-page Teletext memory, which
takes a few moments to load and it offers two
ways of viewing Teletext Auto and List which are
explained below.
Once in this chosen page, if there are sub-pages
they will automatically load into memory without
changing the one you are reading. If there are many
sub-pages, it will take a long time for them all to
load and this will depend on the speed with which
the broadcaster transmits them.
To access the sub-pages in memory, press  or 
to view them.
Setting up the Teletext mode
To select a language for Teletext:
The language 1-4 option enables the display of
different language when using Teletext.
Using Subtitles
1
1
2
From the PREFERENCES menu, and then press
 or  to select Teletext Language.
Press  or  to select the required language.
• Language 1: English, German, Dutch,
Flemish, Russian, Bulgarian, Ukrainian, Lettish,
Lithuanian, Czech, Slovak, Estonian
• Language 2: Polish, German, Dutch, Flemish,
Estonian, Lettish, Lithuanian, French, Serbian,
Croatian, Slovenian, Czech, Slovak, Rumanian
• Language 3: English, French, Hebrew, Turkish,
Arabic
• Language 4: English, French, Hebrew, Turkish,
Farsi (Iranian/Persian)
To select Teletext mode:
Select a channel position with the desired Teletext
service.
1
Press SUBTITLE on the remote control to while
the teletext screen is displayed to display
subtitles. While the subtitles are displayed, press
SUBTITLE again to change the setting.
Using Auto mode
There are two Modes: Auto will display FASTEXT, if
available. List will display your four favorite pages.
In either mode, as an alternative to the coloured
buttons, you can access a page by entering a 3-digit
number, using the Number buttons on the remote
control, or to advance to the next page, press PU, to
go back to the previous page press Pu. To change
between Auto and List, see above.
• Press TEXT to access teletext.
100
Spor t
14:57:55
From PREFERENCES menu, press  or  to
select Teletext.
2
Press  or  to select Auto or List mode.
NOTE:
• It may take a few moments for the multi-page
teletext memory to load.
• You must exit teletext mode in order to display the
main menu.
Teletext general information
TEXT button:
Pressing TEXT once will bring up the teletext screen.
Press again to return to normal TV mode. You need
to return to normal viewing if you wish to change
channels.
When you first press TEXT to access the text service,
the first page you see will be the initial page.
In Auto mode, this displays the main subjects
available and their relevant page numbers.
In List mode, you will see the page numbers
currently stored on the each colour button.
Football
Red
Baseball
Green
Racing
Swimming
Yellow
Blue
If FASTEXT is available, you will see 4 coloured titles
at the base of the TV screen. To access any given
subject, simply press the relevant coloured button
on the remote control.
If FASTEXT is not available, you can access any
page simply by entering a 3-digit page number or
pressing the corresponding coloured button.
For further information on your particular text
system(s), see the broadcast teletext index page or
consult your local TOSHIBA dealer.
35
405055L5550Series_EEEV_En.indd 35
27/05/18 13:14:59
Using the TV’s features
Using List mode
1
To reveal concealed text:
Some pages cover topics such as quizzes and jokes.
To discover the solutions, press .
Press TEXT to access teletext.
100
TEXT M00
14:58:55
To hold a wanted page:
This function is included as it is part of the broadcast
teletext system but you will not need it as this TV
allows you to control the display of sub-pages.
100
101
Red
Green
102
Yellow
103
Blue
The four choices at the bottom of the screen are
now number – 100, 101, 102 and 103, which
have been programmed into the TV’s memory.
2
To view these pages, use the coloured prompt
buttons.
e.g. press the Green button to view page 101.
3
If you want to change these stored pages, press
the coloured button for the colour you want to
change.
e.g. Press the Green button and enter the 3-digit
number.
101
100
TEXT M00
101
14:58:59
102
103
This number will change.
4
5
To enlarge the teletext display size:
Press once to enlarge the top half of the page,
press again to enlarge the bottom half of the page.
Press again to revert to the normal size.
To select a page while viewing a normal picture:
When in teletext mode, if a page selection is made
and then
is pressed, a normal picture will be
displayed. The TV will indicate when the page is
present by displaying the title bar of the text page at
the top of the screen. Press
to view the page.
NOTE:
It will not be possible to change programme position
while in Teletext mode, you will have to cancel the
teletext first by pressing TEXT to return to a normal TV
picture.
To select the time display:
If you press
while watching a normal TV
broadcast, you will see a time display from the
broadcaster. It will remain on the screen for about 4
seconds.
9:56 and 25 seconds p.m.
21:56:25
Press OK to store your choice.
You may view other pages by simply entering
the 3-digit page number – but NEVER press OK
or you will lose the favorite already stored.
Teletext buttons on the remote control
Below is an introduction to the teletext buttons on
your remote control and their functions.
To display a page of teletext:
Press TEXT to display teletext. Press again to return
to normal TV mode.
To display an index/initial page:
In Auto-mode
Press
to access the index page. The one displayed
is dependant on the broadcaster.
In List-mode
Press
to return to the 100 page or initial page.
36
405055L5550Series_EEEV_En.indd 36
27/05/18 13:15:00
Using the TV’s features
Connecting an audio system
Back connections
Connection example
TV back view
DVD video player
(with component
video outputs)
or
Audio system
Set Top Box
or
VCR (Normal)
• Before connecting any external equipment, turn
off all main power switches.
• The unauthorized recording of TV programmes,
DVDs, video tapes and other materials may
infringe upon the provisions of copyright law.
• The COMPONENT VIDEO INPUT consists of three
component video signals (Y, PB/CB, PR/CR) and
provides the best picture performance. These
terminals can only be used with the component
video compatible equipment e.g. DVD video
player, etc.
• If you connect to COMPONENT VIDEO for the
COMPONENT / VIDEO INPUT terminals, screen
display will appear changes to COMPONENT.
• Additional equipment and cables shown are not
supplied with this TV.
NOTE:
o (1) COMPONENT / VIDEO INPUT terminals
Standard mode
Yellow
You can enjoy high quality dynamic sound by
connecting the TV to an audio system.
NOTE:
• DO NOT connect the DIGITAL AUDIO output
terminal to the AC-3 RF input of a Dolby Digital
Receiver with a built-in Dolby Digital decoder.
• Connect the DIGITAL AUDIO output terminal to the
OPTICAL input of a receiver or processor.
• Refer to the owner’s manual of the connected
equipment as well.
• When you connect the TV to other equipment, be
sure to turn off the power and unplug all of the
equipment from the wall outlet before making any
connections.
• The output sound of the TV has a wide dynamic
range. Be sure to adjust the audio amplifier’s volume
to a moderate listening level before turning on the
power. Otherwise, the speakers and your hearing
may be damaged by sudden high volume audio.
• Turn off the amplifier before you connect or
disconnect the TV’s power cord. If you leave the
amplifier power on, the speakers may be damaged.
Warning:
When you are connecting (via the DIGITAL AUDIO
output terminal) an AV decoder that does not have
Dolby Digital decoding function, be sure to set PCM
for Digital Audio Output (- page 49). Otherwise,
the speakers and your hearing may be damaged by
sudden high volume audio.
Connecting an amplifier equipped with a Dolby Digital
decoder
Amplifier equipped with
Dolby Digital decoder
To Optical type
digital audio input
Optical digital cable
(not supplied)
Component mode
Green
Blue
To Digital Audio
output terminal
TV back view
Red
White
White
Red
Red
(Audio)
Front speaker
Centre speaker
Surround speaker
Signal flow
Sub woofer
You can enjoy dynamic realistic sound by
connecting the TV to an amplifier equipped with a
Dolby Digital decoder or Dolby Digital processor.
When using this setup, select Auto in the Digital
Audio Output (- page 49).
37
405055L5550Series_EEEV_En.indd 37
27/05/18 13:15:00
Using the TV’s features
Connecting an amplifier equipped with a digital audio
(optical) input
Amplifier equipped with
digital audio input
To Optical type
digital audio input
Optical digital cable
(not supplied)
To Digital Audio
output terminal
TV back view
Front speaker
Signal flow
You can enjoy the dynamic sound of a 2-channel
digital stereo by connecting the TV to an amplifier
equipped with a digital audio (optical) input and
speaker system (right and left front speakers). When
using this setup, select PCM in the Digital Audio
Output (- page 49).
Connecting HDMI or DVI devices
• When turning on your electronic components,
turn on the TV first, and then the HDMI and DVI
device.
• When turning off your electronic components,
turn off the HDMI and DVI device first, and then
the TV.
• This TV may not be compatible with features and/
or specifications that may be added in the future.
• This TV is only operable with L-PCM and Dolby
Digital on 32/44.1/48 kHz. If there is no sound
when using HDMI, use the analogue audio cables
to connect the TV and the HDMI device, and
select Analogue in HDMI 1 Audio of the AV
Connection menu (- page 39).
• This TV is able to connect with HDMI devices. But
it is possible that some HDMI devices may not
operate properly with this TV.
• HDMI: High-Definition Multimedia Interface
• HDCP: High-bandwidth Digital Content Protection
• CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth
digital content protection, which is being
standardized for reception of high-definition
video signals. Because this is an evolving
technology, it is possible that some devices may
not operate properly with the TV.
• Acceptable PC signal format:
• S-VGA: VESA 800 5 600 @ 56/60/72/75 Hz
• XGA: VESA 1024 5 768 @ 60/70/75 Hz
• W-XGA: VESA 1280 5 768 @ 60/75 Hz
• W-XGA: VESA 1360 5 768 @ 60 Hz
• S-XGA: VESA 1280 5 1024 @ 60 Hz
However, these signal formats are converted to
match the number of pixels of the LCD panel.
Therefore, the TV may not display small text
properly.
If you connect this unit to your PC, the compressed
image is displayed in S-XGA mode, therefore the
picture quality may deteriorate and characters may
not be read.
• L-PCM: Linear-Pulse Code Modulation
• Supported Audio format: L-PCM, Dolby Digital
sample rate 32/44.1/48 kHz
Connecting an HDMI device
One HDMI cable (type A connector)
For proper operation, it is recommended that you
use a short HDMI cable.
HDMI cable transfers both video and audio.
TV side view
TV back view
Connecting HDMI or DVI devices
The HDMI input on your TV receives digital audio
and uncompressed digital video from an HDMI and
uncompressed digital video from a DVI device.
This input is designed to accept HDCP programme
material in digital from CEA-861-D compliant
consumer electronic devices (such as a set top box
and DVD player with HDMI and DVI output).
The HDMI input is designed for best performance
with 1080i (50/60 Hz) and 1080p (24/50/60 Hz) highdefinition video signals, but will also accept and
display 480i, 480p, 576i, 576p, and 720p (50/60 Hz)
and VGA (VESA 640 × 480 @ 60/72/75 Hz) signals.
HDMI device
VIDEO
AUDIO
L
R
IN
HDMI OUT
OUT
38
405055L5550Series_EEEV_En.indd 38
27/05/18 13:15:00
Using the TV’s features
Connecting a DVI device
Setting the HDMI 1 Audio mode
One HDMI (type A connector)-to-DVI adapter cable
and audio cables.
For proper operation, the length of an HDMI-toDVI adapter cable should not exceed 3 m. The
recommended length is 2 m.
You can select sound of an HDMI or DVI device
connected to the HDMI input terminals from three
modes:
Auto, Digital or Analogue.
NOTE:
This function is available only when the PC/HDMI 1
Audio mode is set to HDMI1.
Standard analogue audio cables
1
An HDMI-to-DVI adapter cable transfers only video.
Separate analogue audio cables are required.
From the AV Connection menu, press  or 
to select HDMI 1 Audio.
2
Press  or  to select Auto, Digital or
Analogue.
HDMI (type A connector)-to-DVI adapter cable
TV back view
Connecting a computer
To connect a PC to the RGB/PC terminal on the TV:
An analogue RGB (15 pin) computer cable can be
connected.
TV back view
DVI device
VIDEO
DVI
OUT
AUDIO
L
R
IN
OUT
Audio cable
for PC-to-TV
connection
Selecting the PC/HDMI 1 Audio mode
You can select PC audio or HDMI audio when using
this function.
1
From the PREFERENCES menu and press  or
 to select AV Connection
2
Press OK to display the AV Connection menu.
AV Connection
Input Labelling
PC/HDMI 1 Audio
HDMI 1 Audio
3
PC
Digital
Press  or  to select PC/HDMI 1 Audio and
press  or  to select PC or HDMI1.
Mini D-sub
15 pin
Computer
Conversion RGB PC cable
adapter
(if necessary)
Connect a PC cable from the computer to the
o RGB/PC terminal on the back of the TV.
The following signals can be displayed:
VGA: VESA 640 x 480 @ 60/72/75 Hz
S-VGA: VESA 800 x 600 @ 56/60/72/75 Hz
XGA: VESA 1024 x 768 @ 60/70/75 Hz
W-XGA: VESA 1280 x 768 @ 60 Hz
W-XGA: 1280 x 800 @ 60/75 Hz
W-XGA: VESA 1360 x 768 @ 60 Hz
W-XGA+: 1440 x 900 @ 60 Hz
S-XGA: VESA 1280 x 1024 @ 60 Hz
1920 x 1080p @ 60 Hz (Horizontal Frequency: 67.5
kHz (H), Pixel Clock Frequency: 148.5 MHz)
39
405055L5550Series_EEEV_En.indd 39
27/05/18 13:15:00
Using the TV’s features
NOTE:
• Some PC models cannot be connected to this TV.
• If connecting a certain PC model that signal is
particular, the PC signal may not be detected
correctly.
• There is no need to use an adapter for computers
with DOS/V compatible mini D-sub 15 pin terminal.
• A bar may appear in the upper, lower, right or left
side of the screen, or parts of the picture may be
obscured depending on some signals. This is not the
malfunction.
• If the edges of the picture are stretched, readjust the
picture position adjustments in the PC Settings
menu.
• Depending on the specification of the PC you are
playing the DVD-Video on, and the DVD’s title, some
scenes may be skipped, or you may not be able to
pause during multi-angle scenes.
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the
TV, use an HDMI-to DVI adapter cable and analogue
audio cables.
If connecting a PC with an HDMI terminal, use an
HDMI cable (type A connector). Separate analogue
audio cables are not necessary.
TV back view
Signal names for mini D-sub 15 pin connector
Pin assignment for RGB/PC terminal
Pin No.
Signal name
Pin No.
Signal name
1
R
9
NC
2
G
10
Ground
3
B
11
NC
4
NC (not
connected)
12
5
Ground
13
H-sync
6
Ground
14
V-sync
7
Ground
15
DDC Clock
8
Ground
DDC Data
Using the PC Settings
• First press o until the video input mode list
appears on the screen, then press  or  and
OK in order to select the PC input mode (- page
33).
• This function may not be available for some signal
or if no signal is received.
• The optimum points of the Clock Phase
and Sampling Clock adjustments may be
incomprehensible according to the input signals.
Adjusting the picture position
Computer
Audio cable for
PC-to-TV
connection
1
From the Display Settings in the PREFERENCES
menu, press  or  to select PC Settings.
2
Press OK to display the PC Settings menu.
PC Settings
Horizontal Position
0
Vertical Position
Clock Phase
0
Sampling Clock
0
0
Reset
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model that signal is
particular, the PC signal may not be detected
correctly.
3
Press  or  to select an option you want to
adjust. Press  or  to adjust the settings as
required.
40
405055L5550Series_EEEV_En.indd 40
27/05/18 13:15:00
Using the TV’s features
Adjusting the Clock Phase of the picture
If the Clock Phase, which synchronize the PC signal
and LCD display, is not optimized, the picture will
blur.
This function enables you to adjust Clock Phase
and display a clear picture.
1
From the PC Settings menu, press  or  to
select Clock Phase.
2
Press  or  to obtain a clear picture.
Adjusting the Sampling Clock
If the Sampling Clock does not match with the dot
clock frequency of the PC, blurred picture detail will
occur, or screen width will change, or drift patterns
in vertical lines may be apparent.
This function enables you to adjust it and optimize
the picture.
1
From the PC Settings menu, press  or  to
select Sampling Clock.
2
Press  or  to optimize the picture.
Using the Easy remote control to operate the
TV
The following TV operations can be performed
using the Easy remote control:
• When the MENU button is pressed, the menu
screen appears.
• The volume can be adjusted using the +/–
buttons.
• If you press, hold, and then tilt the pointing key
while watching the TV, the operation guide is
displayed.
Pressing, holding, and then tilting the pointing
key vertically changes the channel.
Pressing, holding, and then tilting the pointing
key horizontally changes the input.
Resetting the PC Settings
The Reset function adjusts the PC Settings to the
factory settings.
1
From the PC Settings menu, press  or  to
select Reset.
2
3
Press OK.
A confirmation message will appear. Press  or
 to select Yes, and then press OK.
NOTE:
When a PC is connected using HDMI none of these
function will be available.
41
405055L5550Series_EEEV_En.indd 41
27/05/18 13:15:01
Using the Android features
About the home screen
This section describes the basic operations on the home screen.
• The home screen appears when you press
on the Easy remote control.
• Use the Easy remote control to perform operations. For how to use the Easy remote control, refer to page
10.
6
1
2
Unknown
3
4
4
5
7
• The actual screen may differ in appearance.
• Certain expressions used in the GUI of this product may not correspond to the TV (e.g., touch/
phone/tablet).
1
2
3
4
Status bar
The status icon, notification icon, and time are displayed.
Desktop position
The position of the displayed desktop is shown. The centre indicates the home screen.
Desktop area
A TV window is located to the left of the desktop area on the home screen.
• When purchased, icons such as the TOSHIBA Information and Browser icon are located on the desktop
area of the home screen. The desktop areas can be customized.
Screen slide button
You move to the desktop area to the left or right. The home screen is located at the centre, and the
desktop areas to the left and right are prepared.
Desktop area
(Home screen)
5
6
7
Dock bar area
Shortcut icons for frequently used applications can be found here.
When purchased, you can find the Google folder, Drawer icon and Settings icon here.
• Up to 7 shortcuts can be placed in the dock bar area.
User Name area
The logged in user name is displayed. Select this area to change your profile settings and log out.
Navigation area
This area contains basic navigation icons.
42
405055L5550Series_EEEV_En.indd 42
27/05/18 13:15:01
Using the Android features
The desktop area of the home screen
Moving between desktop areas
The TV window and fixed icons are located on the
desktop area of the home screen.
1
TV window
Select the screen slide button, and press the
pointing key.
The desktop position indicator also changes
with the desktop area.
Alternatively, follow the procedure below:
1
1
At any position in the desktop area, press and
hold the pointing key, and then tilt it to the left
or right.
The desktop area in the direction in which the
pointing key was tilted is displayed.
2
Status bar
3
1
2
3
The notification icon that appears when there is a
notification is displayed on the left side.
Displays the images of the broadcast or external
input.
Displays the channel or external input name of
the images displayed on 1.
Switches the images to be displayed on 1, or
configures the TV settings.
Channel Up B
Channel Down b
Changes the channel
when you select b or
B and then press the
pointing key.
Changes the image
input.
Starts the TV Application.
Full Screen
The unit status icon and time are displayed on the
right side.
Checking detailed information
When the focus is on the status bar and you press
and hold and tilt the pointing key downward,
notification messages are displayed. If you select a
notification message and then press the pointing
key, the related application or setup screen is
displayed.
Opening the quick setup panel
If you select the quick setup icon on the upper right
of the detailed information screen and then press
the pointing key, the quick setup panel is displayed.
• To change the setting, select an icon and then
press the pointing key.
• To return to the detailed information screen,
select the upper right icon and then press the
pointing key.
Dock bar
Google folder
Pre-installed Google applications are stored in this
folder.
Select the icon and press the pointing key to display
all of the stored icons.
Select an application and press the pointing key to
start the application.
43
405055L5550Series_EEEV_En.indd 43
27/05/18 13:15:01
Using the Android features
Displaying a screen of stored applications or widgets
(APPS screen/WIDGETS screen)
1
Select the Drawer icon on the dock bar, and
press the pointing key.
A screen of stored applications (APPS screen) or
widgets (WIDGETS screen) is displayed.
Switching between the APPS screen and the
WIDGETS screen
To display the WIDGETS screen, select the
WIDGETS tab on the upper left and then press
the pointing key.
To display the APPS screen, select the APPS tab
on the upper left and then press the pointing
key.
• If the applications or widgets cannot be
accommodated on a single screen, select  or
 and then press the pointing key.
Settings
Select the Settings icon and press the pointing key
to display the settings screen.
Logging out
1
Select the User Name area, and press the
pointing key.
2
Select Logout, and press the pointing key.
Notes on using the Android features
• To use the Android features effectively, an Internet
connection is required. "Connecting a network"
(- page 46)
• Some features require an always-on broadband
internet connection, firmware update and/or
additional bandwidth dedicated to this product.
Third party internet services may change or
be discontinued or restricted at any time.
TOSHIBA makes no warranties, representations,
or assurances about the content, availability or
functionality of third-party content or services.
Use of third party internet services may require
registration by a computer and/or payment of
charges and membership. Not all services or
content may be available on this product, in
your country or with your language. In order to
experience the full capabilities of this product,
fully compatible devices may be required.
• This service may be forcibly blocked according to
the situation of CSP service.
• If a downloaded application is updated,
performance cannot be guaranteed.
If a preinstalled application other than TV
Application, Media Player, Screen Mirroring, and
TOSHIBA Service Station is updated, performance
cannot be guaranteed.
Starting an application
1
You are logged out, and the login screen
appears.
Select a shortcut icon on the desktop area or an
icon on the APPS screen, and press the pointing
key.
The application of the selected icon starts up.
is displayed on the screen, pressing
When
MENU redisplays the home screen.
Navigation area
Returns to the previous screen.
Displaying the application menu
Many applications have their own menus.
1
Press MENU.
The application menu appears.
NOTE
Some applications have no menus..
Displays the home screen.
Displays a list of recently used
applications. (The applications can
also be started from here)
44
405055L5550Series_EEEV_En.indd 44
27/05/18 13:15:01
Using the Android features
Customizing the desktop
Customizing the Dock bar
You can locate or move application shortcut icons
or widgets on the desktop area to customize the
desktop.
The shortcut icons or widgets can be removed.
Placing shortcut icons on the Dock bar
Up to 7 shortcuts can be placed in the dock bar.
1
Select the icon to place in the dock bar on the
desktop, press and hold the pointing key and
move the icon to the dock bar.
2
Release the pointing key.
Placing shortcut icons or widgets on the desktop
1
Select the Drawer icon on the dock bar, and
press the pointing key.
2
Select a tab on the upper left to display the
APPS or WIDGET screen.
3
Select an application or widget to place on the
desktop, and press and hold the pointing key.
The desktop appears.
Keep pressing and holding the pointing key
until the icon or widget has been placed.
4
5
Press, hold and tilt the pointing key to the left
or right to display the desktop to place the
application or widget on.
Move the application or widget to any position,
and release the pointing key.
It is placed in the specified position.
Moving shortcut icons or widgets
1
2
Select a shortcut icon or widget to move, and
press, hold and tilt the pointing key in your
preferred direction.
Release the pointing key in any position.
Removing shortcut icons
1
Select the icon to remove on the dock bar, press
and hold the pointing key and move the icon to
the desktop.
2
Release the pointing key.
NOTE:
The Drawer icon cannot be moved or removed.
Grouping shortcut icons
Place a shortcut icon on top of another shortcut
icon to create a folder containing both icons.
Select the newly created folder icon and press the
pointing key to display the shortcuts stored in the
folder. Select an icon and press the pointing key to
start the selected application.
• The newly created folder can be moved and
removed in the same way as normal icons.
Uninstalling an application or widget
Uninstall a downloaded application or widget.
Removing shortcut icons or widgets
1
Select the Drawer icon on the dock bar, and
press the pointing key.
1
Select a shortcut icon or widget to remove, and
press and hold the pointing key.
2
Select a tab on the upper left to display the
APPS or WIDGET screen.
2
When "Remove" appears on the bottom left,
move the icon or widget to the "Remove" text,
and then release the pointing key.
3
Select an application or widget to uninstall, and
press and hold the pointing key.
When the icon or widget is over the "Remove"
text, the text and icon or widget turn red. When
you release the pointing key, the icon or widget
is removed.
• Shortcut icons or widget that are removed
from the desktop are not removed from the
APPS or WIDGET screen.
The desktop is displayed, and "Uninstall"
appears on the bottom left.
• "Uninstall" does not appear if the application
or widget cannot be uninstalled.
4
Press and hold the pointing key, move the
icon or widget to the "Uninstall" text, and then
release the pointing key.
When the icon or widget is over the "Uninstall"
text, the text and icon or widget turn red. When
you release the pointing key, the icon or widget
is removed.
45
405055L5550Series_EEEV_En.indd 45
27/05/18 13:15:01
Using the Android features
Using the Screen Mirroring function
Connecting a network
You can view the screen of your tablet, smartphone
or PC on the TV.
The LAN port allows your TOSHIBA TV to connect to
your home network.
NOTE:
• If you use a Hub or switch to connect the TV to your
home network, you may not be able to use the
automatic setup and have to manually set up the
network address (- page 48).
• If you use a router with built-in DHCP functionality,
use the automatic setup. Manual setup may not
work.
1
Select the Screen Mirroring icon on the home
screen, and press the pointing key.
The connection standby screen appears.
You can check the device name.
2
Operate your tablet, smartphone or PC to
display the screen on the TV.
Select the TV which you wish to connect to.
“Connecting” will be shown on the TV.
• PBC mode:
After the Screen Mirroring connection is
complete, the TV screen will mirror the
content shown on the tablet, smartphone or
PC.
• PIN mode:
Proceed to step 3.
3
To connect the TV to a home network - Wired
TV back view
Modem
Router with Hub
Connecting your tablet, smartphone or PC to
your TV the first time .
When selecting the TOSHIBA TV for the first
time, a 8-digit code will appear on your TV
screen.
This code needs to be input into your tablet or
smartphone to authenticate the connection.
If authentication has already taken place,
”Connecting” will appear on screen.
• After the Screen Mirroring connection is
complete, the TV screen will mirror the
content shown on the tablet, smartphone or
PC.
NOTE:
• When the Screen Mirroring software is active, other
applications may not be usable.
• When Screen Mirroring is used, you cannot connect
to the Internet using the TV.
To exit Screen Mirroring:
Exit using your tablet, smartphone or PC or by
pressing EXIT on the TV remote control.
NOTE:
It may not be possible to connect some tablets,
smartphones and PCs to the TV.
[1]
[2]
[2] [3]
Server PC
Cable or
Phone jack
[2]
[1] Coaxial or telephone cable (depending on your
modem type)
[2] Standard LAN cable
[3] DO NOT connect a phone jack directly to the TV’s
LAN port.
To connect the TV to a network - Wireless
Please refer to “Setting up the Network” section.
• If this device is going to be operated in the
frequency range of 5.15 GHz to 5.35 GHz, it is
restricted to indoor use.
46
405055L5550Series_EEEV_En.indd 46
27/05/18 13:15:01
Using the Android features
When using a wireless network
Setting up the wireless LAN
CAUTION:
• Bluetooth™ and Wireless LAN devices operate within
the same radio frequency range and may interfere
with one another. If you use Bluetooth™ and Wireless
LAN devices simultaneously, you may occasionally
experience a less than optimal network performance
or even lose your network connection.
• If you should experience any such problem,
immediately turn off either your Bluetooth™ or
Wireless LAN device.
• Actual performance can vary, including lower
wireless network capacity, data throughput rate,
range and coverage.
• Performance depends on many factors, conditions
and variables, including distance from the access
point, volume of network traffic, building materials
and construction, operating system used, mix of
wireless products used, interference and other
adverse conditions.
Configure the TV so it can be connected to a
wireless LAN access point wirelessly.
NOTE:
Continued connection of AP (Access Point) is not
guaranteed. The connection may be disconnected
while watching TV.
Wireless LAN and your Health
Wireless LAN products, like other radio devices, emit
radio frequency electromagnetic energy. The level
of energy emitted by Wireless LAN devices, however,
is far less than the electromagnetic energy emitted
by wireless devices such as mobile phones.
Because Wireless LAN products operate within the
guidelines found in radio frequency safety standards
and recommendations, TOSHIBA believes Wireless
LAN is safe for use by consumers. These standards
and recommendations reflect the consensus of the
scientific community and result from deliberations
of panels and committees of scientists who
continually review and interpret the extensive
research literature.
In some situations or environments, the use of
Wireless LAN may be restricted by the proprietor
of the building or responsible representatives of
the organization. Such restrictions may apply in
environments where the risk of interference to
other devices or services is perceived or identified
as harmful.
If you are uncertain of the policy that applies to the
use of wireless devices in a specific organization
or environment, you are encouraged to ask for
authorization to use the Wireless LAN device prior to
turning on the equipment.
There are 3 methods for Wireless Setup:
Easy Setup (PBC or PIN)
If the AP supports Wi-Fi Protected Setup, this
method can be used.
• Wi-Fi Protected Setup is an industry standard
designed to make connection of wireless
LAN equipment and security setup easy. Wi-Fi
Protected Setup will automatically configure all
wireless settings.
NOTE:
WEP encryption may not be able to configured by easy
setup.
Assisted setup by using the Wireless Routers
notification information.
Network name, Authentication and Encryption
are decided based on information sent from the
Wireless router. Security key to be set manually.
Manual setup
Network name, Authentication, Encryption and
Security Key all to be inputted manually.
Easy Setup using PBC (Push Button Configuration)
1
Select the Settings icon on the home screen,
and press the pointing key.
The Settings screen appears.
2
3
Select Wi-Fi®, and press the pointing key.
4
Select WPS PUSH BUTTON on the upper right,
and press the pointing key.
5
Following the on-screen instructions, push the
appropriate button on your AP.
6
When a window appears indicating that the
setup is complete, select OK and then press the
pointing key.
Press the pointing key to change the value from
OFF to ON.
Easy Setup using PIN (Personal Identifi cation Number)
1
Select the Settings icon on the home screen,
and press the pointing key.
The Settings screen appears.
47
405055L5550Series_EEEV_En.indd 47
27/05/18 13:15:01
Using the Android features
2
3
Select Wi-Fi®, and press the pointing key.
Checking and changing other settings
Press the pointing key to change the value from
OFF to ON.
Ethernet
4
Select menu icon on the upper right, and press
the pointing key.
5
Select WPS Pin Entry, and press the pointing
key.
6
Following the on-screen instructions, enter the
PIN code on your AP.
7
When a window appears indicating that the
setup is complete, select OK and then press the
pointing key.
Check and change the network information.
To display the network information, select Ethernet
and then press the pointing key.
on the upper
• To change the setting, select
right and then press the pointing key.
Data usage
Assisted Setup
Check the usage status of the internal memory.
To display the current usage status of the internal
memory, select Data usage and then press the
pointing key.
1
More...
Select the Settings icon on the home screen,
and press the pointing key.
The Settings screen appears.
2
3
Select Wi-Fi®, and press the pointing key.
4
5
Select an AP, and press the pointing key.
Press the pointing key to change the value from
OFF to ON.
Select the Password field, and press the
pointing key.
The Software Keyboard window will appear.
6
Input the password by using the Software
Keyboard.
7
Select Connect, and press the pointing key.
Manual Setup
1
Select the Settings icon on the home screen,
and press the pointing key.
The Settings screen appears.
2
3
Select Wi-Fi®, and press the pointing key.
4
Select ADD NETWORK on the upper right, and
press the pointing key.
Press the pointing key to change the value from
OFF to ON.
The Add network screen appears.
5
Enter the necessary information such as
Network SSID and Security.
6
Select Save, and press the pointing key.
Set up a VPN (Virtual Private Network).
To display the setup screen, select More... and then
press the pointing key.
Sound
Configure volume and other settings.
To display the sound setup screen, select Sound and
then press the pointing key.
When  is shown, it indicates that Audio Source
Filtering or Screen lock sounds is enabled.
The setting switches between enabled and disabled
each time you select it and then press the pointing
key.
Setting the volume
Select Volumes, press the pointing key, and then set
the volume and Audio Source Filtering using the
slide bar.
• If  is shown for Audio Source Filtering, the
operation screen appears when the volume
button is pressed. You can adjust the volume
balance for voice and background using  or .
 for Audio Source Filtering appears and
disappears alternately each time OK is pressed.
NOTE:
• Audio Source Filtering has been designed for private
use and entertainment in your home environment.
Please note that any unlawful use, including use
in public and any commercial use, could lead to
copyright infringement of right holder's rights.
TOSHIBA asks you to respect the intellectual property
rights of third parties.
• The effect of Audio Source Filtering depends on the
contents.
• If the content is mono, it may not have enough
effect.
48
405055L5550Series_EEEV_En.indd 48
27/05/18 13:15:02
Using the Android features
• Audio Source Filtering may amplify the noise that is
included in the content.
• The volume may wobble when you enable Audio
Source Filtering.
• Audio Source Filtering takes a few seconds to exert
after enabling it, changing content, jump and
changing volume.
• Audio Source Filtering may not work with some
applications.
• If Audio Source Filtering is used at the same time as
another sound effect (Surround, etc.), the effects
may not work correctly.
Apps
Digital Audio Output
Users
Configure the settings for sound output from the
DIGITAL AUDIO terminal.
Select a setting from those listed below according to
the connected device, and press the pointing key.
• Auto: This mode automatically outputs in
Dolby Digital format (for Dolby Digital,
Dolby Digital Plus or HE-AAC audio
signals) or PCM format (for PCM audio
signals) from an Digital broadcast,
HDMI or USB device to the digital
audio output socket.
• PCM: Select this when a 2ch digital stereo
amplifier is connected to the TV. When
you select a Dolby Digital or MPEG
audio track, the sound is converted to
the PCM (2ch) format and output.
Add or delete a user, or add user information.
Select Users and then press the pointing key. The
current information is displayed.
If you select the owner icon and then press the
pointing key, the Profile screen appears. You can
customize the profile.
If you select Nickname or Owner info and then press
the pointing key, you can edit the data.
Display
Security
Set the screen Display and wallpaper.
To display the display setup screen, select Display
and then press the pointing key.
• Brightness: Set the brightness of the
screen.
• Wallpaper : Set the wallpaper.
• Font size :
Set the size of fonts displayed
on the screen.
Set the security.
To display the setup screen, select Security and then
press the pointing key.
Set it up if necessary.
HDMI CEC Setup
Configure the HDMI CEC function. (- page 61)
Storage
Check the storage and available capacity for each
item.
To display the storage and available capacity
for each item, select Storage and then press the
pointing key.
Check the applications.
Select Apps and then press the pointing key. The
preinstalled and downloaded applications are
displayed.
A bar appears on the lower side indicating the size
of the installed applications.
If you select an application and then press
the pointing key, information on the selected
application is displayed.
Location
Set the location information.
To display the setup screen, select Location access
and then press the pointing key.
Set it up if necessary.
Language & input
Configure the language and input settings.
To display the setup screen, select Language & input
and then press the pointing key.
If you select Language and then press the pointing
key, you can change the display language.
Configure the other settings if necessary.
• If you select
and then press the pointing key,
you can set the details of the selected item.
49
405055L5550Series_EEEV_En.indd 49
27/05/18 13:15:02
Using the Android features
Backup & reset
Automatic Power Down
Configure the backup and reset settings.
To display the setup screen, select Backup & reset
and then press the pointing key.
Set them up if necessary.
Factory data reset resets the settings to factory
default.
Set Automatic Power Down.
The TV will automatically turn itself off (standby)
after approximately 4 hours, if you do not operate
the control buttons on the remote control or on the
TV control panel.
To display the setup screen, select Automatic Power
Down and then press the pointing key.
NOTE:
1 minute before switching to standby, a warning
message will appear.
Accounts
You can check, add and edit your registered service
accounts.
Set them up if necessary.
Date & time
Set the date and time.
To display the setup screen, select Date & time and
then press the pointing key.
Set them up if necessary.
Accessibility
Set the accessibility.
To display the setup screen, select Accessibility and
then press the pointing key.
Set it up if necessary.
Panel Lock
Set Panel Lock.
Panel Lock disables the buttons on the TV. All
buttons on the remote control can still be used.
To display the setup screen, select Panel Lock and
then press the pointing key.
Set it up if necessary.
NOTE:
When Panel Lock is On, a reminder will appear when
the keys on the TV are touched. If the standby key is
touched, the TV will switch off and can only be brought
out of standby by using the remote control.
Quick Start
Set Quick Start.
Set it to ON to reduce the time from standby to
power on.
To display the setup screen, select Quick Start and
then press the pointing key.
NOTE:
When Quick Start is set to ON, the power consumed in
standby mode increases slightly.
About TV
Check information about the TV.
To display the information screen, select About TV
and then press the pointing key.
If you select an item on the information screen and
then press the pointing key, the details appear.
TV
If you select TV and then press the pointing key, the
images and audio of TV broadcasts (external input)
are output.
Media Player
If you select Media Player and then press the
pointing key, the top screen of Media Player is
displayed (- page 52).
Sleep Timer
Set Sleep Timer (- page 27).
To display the setup screen, select Sleep Timer and
then press the pointing key.
Place the  mark to enable Sleep Timer.
and then press the pointing key. The
Select
advanced setup screen appears, and you can set
Sleep Timer.
50
405055L5550Series_EEEV_En.indd 50
27/05/18 13:15:02
Using the Android features
Updating the system
Use TOSHIBA Service Station to update the system.
1
2
3
Display the APPS screen (- page 44).
Select and start TOSHIBA Service Station.
Follow the on-screen instructions.
Using the TV remote control to operate
The following buttons on the TV remote control can
be used to operate Android features, when the Easy
remote control cannot be used.
NOTE:
Not all the Android features can be operated.
MENU
:
  :
OK
:
BACK
EXIT
:
:
When
is displayed on the screen,
pressing MENU redisplays the home
screen.
Select an item.
Confirm the selected item.
Using   to select an item and
pressing OK works the same as using
the pointing key.
Go back to the upper layer.
Return to the home screen.
51
405055L5550Series_EEEV_En.indd 51
27/05/18 13:15:02
Using the Media Player
This TV allows you to enjoy video, music and photo
files stored on a Internal memory or USB device
connected to the USB port.
Starting Media Player
Terminology
1
2
The TV can control and play content from a USB
device.
NOTE:
• Do not insert/remove USB device while in use.
• TV menu is not available during playback.
Starting Media Player while you are watching TV
Press QUICK to open the Quick Menu.
Press  or  to select Media Player and press
OK.
The top screen of the Media Player appears.
Media Player Specifications
Device
Internal memory
File system: FAT16 and FAT32
USB device
Interface version: USB2.0 HS
USB Mass Storage Class devices (MSC)
NOTE:
• Connectivity is not guaranteed for all devices.
• Incorrect behaviour may occur with a USB hub
connection.
• Turn off the TV before connecting a USB HDD
devices.
• The Auto Format function is not available.
• The aspect ratio may not be correct in some cases.
• Alternatively, press MENU and select Media
Player from the APPLICATIONS menu.
3
Press  or  to select Photos, Music, or Videos,
and then press OK.
4
Select a device, and press OK.
The device selection screen appears.
Example: When Photos is selected
Photos
5/999
/xxxxxxxxxxxxxxx/
File system: FAT16 and FAT32
You must obtain any required permission
from copyright owners to download or use
copyrighted content. TOSHIBA cannot and does
not grant such permission.
xxxxxxxxxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
Title : xxxxxxxxxxxxxxxxxxxxxx.jpg
Date : xxxx xxx xxxxx xxxxx
Size : 1920 x 1080
52
405055L5550Series_EEEV_En.indd 52
27/05/18 13:15:02
Using the Media Player
Starting Media Player from the home screen
Viewing photo files
1
File Compatibility
Select
, and press the pointing key.
The top screen of the Media Player appears.
See page 63.
Using the TV remote control to operate
There are three types of viewing modes.
Multi View
2
Select the Photos, Music, or Videos icon, and
press the pointing key.
This view allows you to search for photos in a grid
format.
The pictures are displayed using thumbnail data in
each image file.
The device selection screen appears.
Photos
3
5/999
/xxxxxxxxxxxxxxx/
Select a device, and press the pointing key.
Exiting Media Player
When the top screen of Media Player is displayed
or you are operating Media Player, perform the
following:
xxxxxxxxxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
Title : xxxxxxxxxxxxxxxxxxxxxx.jpg
Date : xxxx xxx xxxxx xxxxx
Size : 1920 x 1080
Using the TV remote control
1
2
Press QUICK to open the Quick Menu.
Press  or  to select TV Application or
System Settings.
• If you select TV Application, the TV broadcast
(external input) is output.
• If you select System Settings, the Setting
screen appears.
The initial highlighted position will be on the top
left thumbnail in the Multi View.
1
Press , ,  or  to select a photo or folder.
PU / Pu buttons can be used to page up/down
the Multi View when there are more photos
than will fit onto one screen.
2
When you select a folder, press OK to move to
the next layer. Press BACK to move back to the
previous layer.
3
Press OK to view the selected photo in Single
View mode.
Using the Easy remote control
1
Press
.
The home screen appears.
Single View
In this mode, only files located in the selected
directory will be displayed. This view allows you
to change the photo content manually. When
moving from Multi View to Single View, the currently
selected photo will be displayed.
• Press  to view the next photo. Press  to view
the previous photo.
• Press  to rotate the image 90° clockwise. Press
 to rotate the image 90° counterclockwise.
• Press
to display file status information.
53
405055L5550Series_EEEV_En.indd 53
27/05/18 13:15:03
Using the Media Player
Slide Show
Using the Easy remote control to operate
This view allows you to watch a slide show of
your photos. In this mode, only files located in the
selected directory will be played.
Multi View
Photos
1
To start slideshow, press OK in the Single View
mode.
2
Press  or  to view the previous/next photo.
• Press
to display file status information.
5/999
/xxxxxxxxxxxxxxx/
xxxxxxxxxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
Title : xxxxxxxxxxxxxxxxxxxxxx.jpg
Date : xxxx xxx xxxxx xxxxx
To set Interval Time setting:
1
2
3
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
Press QUICK to open the Quick Menu.
Press  or  to select Interval Time.
Press  or  to select Normal, Fast or Slow.
NOTE:
If  or  is pressed during Slide Show playback, the
Interval Time is reset.
To set Repeat setting:
To play a slide show repeatedly, select On.
1
2
3
Size : 1920 x 1080
1
Press QUICK to open the Quick Menu.
Press  or  to select Repeat.
Press  or  to select On or Off.
To zoom in/out photos
During the Single View mode or Slide Show mode,
the zoom function can be used.
RED button (Zoom in)
x2 S x4 S x8 S x16 zoom
GREEN button (Zoom out)
x8 S x4 S x2 S x1 zoom
BACK button: Normal playback
  buttons: Vertical or Horizontal scrolling
NOTE:
Using the zoom function while in the Slide Show
mode will stop the slideshow and zoom in the photo.
• If you select a file and then press the pointing
key, the screen is displayed in single view.
• If you select a folder and then press the
pointing key, the next layer appears.
• To go back to the upper layer, press .
• If you select b or B in 1 and then press the
pointing key, the screen scrolls.
Single View
If you move the pointing key, the operation buttons
appear on the screen.
NOTE:
The operation buttons are displayed for a few seconds,
and automatically disappear if no operation is
performed.
• z : Displays the next photo.
• Z : Displays the previous photo.
•
: Switches between Repeat On and Off.
To close the Photo Viewer
1
Press EXIT.
The top screen of the Media Player appears.
54
405055L5550Series_EEEV_En.indd 54
27/05/18 13:15:03
Using the Media Player
During playback:
Playing music files
File Compatibility
See page 63.
Using the TV remote control to operate
You can listen to music from a List View of available
files.
List View
Music
/USB/
Total Time
5/999
• Press W to pause.
• To resume normal playback, press c (play).
PAUSE may not be available depending on the
contents.
• To play in fast reverse or fast forward directions,
press CC or cc during playback. Each time you
press CC or cc, the playback speed will change.
• Press z to skip to the next track. Press Z to skip
to the beginning of the current track. Press Z
again to skip to the beginning of the previous
track.
To set the repeat mode:
USB
xxxxxxxx
xxxx
00:20:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
Artisut : xxxxxxxxxxxxxxxxxxxxxx.mov
Album : xxxxx xxxx xxxxx xxxxx
00:00:00 / 00:00:00
1
2
3
Press QUICK to open the Quick Menu.
Press  or  to select Repeat.
Press  or  to select Off, All or 1.
Mode
Off
Files in the same folder are played back
once.
All
Files in the same folder are repeatedly
played back.
1
The same file is repeatedly played back.
1
Press or  to select a file or folder. PU / Pu
buttons can be used to page up/down the List
View when there are more files than will fit onto
one screen.
2
When you select a folder, press OK to move to
the next layer. Press BACK to move back to the
previous layer.
4
3
With the desired file selected, press OK or c
(play) to start playback.
1
4
Press v to stop playback.
NOTE:
• Depending on the file size, it may take some time for
playback to begin.
• During playback, you can adjust the SOUND menu
functions from the Quick Menu.
Description
Press BACK.
To display the file status information
Press
during playback. The information will
be displayed on the bottom of the screen.
2
Press
again to remove the information.
NOTE:
The information may not be correctly displayed
depending on the contents.
Closing the Music Player:
1
Press EXIT.
The top screen of Media Player appears.
55
405055L5550Series_EEEV_En.indd 55
27/05/18 13:15:03
Using the Media Player
Using the Easy remote control to operate
Viewing video files
List View
File Compatibility
See page 63.
Music
/USB/
Total Time
5/999
Using the TV remote control to operate
USB
xxxxxxxx
xxxx
00:20:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
You can select videos from a List View of available
files.
Artisut : xxxxxxxxxxxxxxxxxxxxxx.mov
Album : xxxxx xxxx xxxxx xxxxx
1
List View
00:00:00 / 00:00:00
Videos
/USB/
Total Time
5/999
USB
xxxxxxxx
• If you select a file and then press the pointing
key, playback starts.
• If you select a folder and then press the
pointing key, the next layer appears.
• To go back to the upper layer, press .
• If you select b or B in 1 and then press the
pointing key, the screen scrolls.
During playback:
If you move the pointing key, the operation buttons
appear on the screen.
NOTE:
The operation buttons are displayed for a few seconds,
and automatically disappear if no operation is
performed.
xxxx
00:20:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
Title : xxxxxxxxxxxxxxxxxxxxxx.mov
Date : xxxxx xxxx xxxxx xxxxx
00:00:00 / 00:00:00
1
Press or  to select a file or folder. PU / Pu
buttons can be used to page up/down the List
View when there are more files than will fit onto
one screen.
2
When you select a folder, press OK to move to
the next layer. Press BACK to move back to the
previous layer.
3
With the desired file selected, press OK or 
(play) to start playback.
4
• Z , z : Works the same as Z or z on the TV
remote control.
• CC , cc : Works the same as CC or cc on the TV
remote control.
• c (W)
: Pauses during playback. Resumes
playback during pause.
•
: Changes the repeat settings.
Press v to stop playback.
NOTE:
If playback finishes before v is pressed, the screen will
return to the List View.
During playback:
• Press W to pause.
PAUSE may not be available depending on the
contents.
To resume normal playback, press  (play) or W.
• To play in fast reverse or fast forward directions,
press CC or cc during playback. Each time you
press the CC or cc, the playback speed will
change.
• Press z to skip to the beginning of the next
chapter. Press Z to skip to the beginning of
the current chapter. Press Z within 2 seconds
after the chapter starts to return to the previous
chapter.
If the content is not categorized into chapters,
press z to skip to the next content, or press Z to
skip to the beginning of the current content. Press
56
405055L5550Series_EEEV_En.indd 56
27/05/18 13:15:03
Using the Media Player
Z within 2 seconds after the content starts to
return to the beginning of the previous content.
• Press  to skip to the next file, or  to return to
the previous file.
• Press
to display the file status information
(content number, video title, progress time etc.).
NOTE:
• The information may not be correctly displayed
depending on the contents.
• During playback, you can adjust the PICTURE and
SOUND menu functions from the Quick Menu.
• The playback speed (CC / cc) may not change
depending on the contents.
To select subtitle and audio languages
• Press SUBTITLE repeatedly to select your
preferred subtitle language.
• You can change the subtitle encode type. See
"Changing the subtitle encode type" ( - page
58) for details.
• Press s repeatedly to select your preferred
audio language.
NOTE:
This feature is not available depending on the
contents.
To close the Movie Viewer
1
The top screen of the Media Player appears.
To register your TV to a DivX® account:
This TV allows you to play back files purchased
or rented from DivX® Video-On Demand (VOD)
services. When you purchase or rent DivX® VOD
files on the internet, you will be asked to enter a
registration code.
1
On the top screen of Media Player, press  or 
to select Setup, and press OK.
2
Press  or  to select DivX® VOD and press
OK.
3
Press  or  to highlight DivX® VOD
Registration and press OK.
4
The DivX® VOD window will appear and you
will see the registration code. For details on
registration, please visit the DivX® website at
http://vod.divx.com.
5
Copy the activation file to a memory device and
play it on the TV.
Setting the repeat mode
1
2
3
Press QUICK to open the Quick Menu.
Press  or  to select Repeat.
Press  or  to select Off, All or 1.
Mode
The file is played back only once.
All
Files in the same folder are repeatedly
played back.
1
The same file is repeatedly played back.
4
To deregister your device
1
In step 3 above, highlight DivX® VOD
Deregistration, and then press OK.
2
A confirmation message will appear. Select Yes
and press OK.
3
The DivX® VOD window will appear and you
will see the deregistration code. For details on
deregistration, please visit the DivX® website at
http://vod.divx.com.
Description
Off
Press BACK.
Resume Play
You can resume playback from where it was last
stopped.
Press v or
while playing the video to memorize
the stopped position.
On the List View screen, if you select a video whose
stopped position has been memorized, the message
“Resume Play?” will appear. Select Yes to resume
playback from the last stopped position.
NOTE:
If you play different content or exit Media Player, the
memorized stopped position will be deleted.
Press EXIT.
DIVX
This DivX Certified® device has passed rigorous
testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your
device at vod.divx.com. Find your registration code
in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® and DivX Plus® HD
(H.264/MKV) video up to 1080p HD, including
premium content.
57
405055L5550Series_EEEV_En.indd 57
27/05/18 13:15:05
Using the Media Player
To playback DivX Plus HD content:
Changing the subtitle encode type
• To play in fast reverse or fast forward directions,
press CC or cc during playback. Each time you
press CC or cc, the playback speed will change.
• This TV generates original chapter point in 10%
increments for 10 chapters in total, that are
accessible by using the Number buttons on the
remote control.
• Press  to skip to the next file, or  to return to
the previous file.
• Press  to skip to the next title, or  to return to
the previous title.
During playback, press z to skip to the beginning
of the next chapter. If z is pressed at the last
chapter, a message appears. If "Yes" is selected,
playback will skip to the next title or content.
Press Z to skip to the beginning of the current
chapter. Press Z within 2 seconds after the chapter
starts to return to the previous chapter. If Z is
pressed within 2 seconds after Chapter 1 starts, a
message appears. If "Yes" is selected, playback will
return to the previous title or content.
When purchased, the encode type is set to UTF-8.
Follow the procedure below to change the encode
type.
1
Press QUICK during playback of a video to open
the Quick Menu.
2
3
Press  or  to select Subtitle Encode Type.
Press  or  to change the setting.
The setting items and encode types are as
shown below.
Setting item
Encode type
Western Europe 1
ISO-8859-1
Western Europe 2
CP-1252
Central Europe 1
ISO-8859-2
Central Europe 2
CP-1250
Cyrillic Alphabet 1
ISO-8859-5
Cyrillic Alphabet 2
CP-1251
The Number button is used for direct jump. If the
3 button is pressed, playback will jump to the
beginning of 3rd chapter.
NOTE:
• When a rental file is played, Z or z cannot be used
to move between the files.
• The above operations cannot be performed
depending on the content.
• The playback speed (CC / cc) may not change
depending on the stream.
Greek 1
ISO-8859-7
Greek 2
CP-1253
Turkish 1
ISO-8859-9
Turkish 2
CP-1254
Thai
CP-874
Arabic
CP-1256
Vietnamese
CP-1258
Using Multi Title and Alternative Timelines Multi Title:
Chinese
GB18030
DivX Plus HD files may contain up to 100 titles.
You can change the title (It contains same video file)
by pressing the RED button.
When the RED button is pressed, it will display the
title change window at the bottom on the screen
(same as Subtitle or Audio change window).
The title is changed cyclically each time the RED
button is pressed. Playback will start from start time
of selected title every press RED button.
NOTE:
The above operations cannot be performed depending
on the content.
UTF-8
UTF-8
UTF-16
UTF-16
58
405055L5550Series_EEEV_En.indd 58
27/05/18 13:15:05
Using the Media Player
Using the Easy remote control to operate
Playing content from a smartphone or tablet
List View
This TV supports MTP (Media Transfer Protocol). You
can connect a smartphone or tablet to one of the
USB terminals on this TV and play content using the
TV's Media Player.
Videos
/USB/
Total Time
5/999
USB
1
xxxxxxxx
xxxx
00:20:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
xxxx.ccc.abc
03:00:00
Connect the smartphone or tablet to a USB 1
terminal on the TV (- page 8).
Title : xxxxxxxxxxxxxxxxxxxxxx.mov
Date : xxxxx xxxx xxxxx xxxxx
1
00:00:00 / 00:00:00
• If you select a file and then press the pointing
key, playback starts.
• If you select a folder and then press the
pointing key, the next layer appears.
• To go back to the upper layer, press .
• If you select b or B in 1 and then press the
pointing key, the screen scrolls.
USB on the TV
USB cable
(not supplied)
NOTE:
• It may not be possible to connect some
smartphones and tablets to the TV.
2
Display the top screen of Media Player.
3
Select the Photos, Music, or Videos icon and
press OK.
During playback:
If you move the pointing key, the operation buttons
appear on the screen.
NOTE:
The operation buttons are displayed for a few seconds,
and automatically disappear if no operation is
performed.
The device selection screen appears.
For Photos
• Z , z : Works the same as Z or z on the TV
remote control.
• CC , cc : Works the same as CC or cc on the TV
remote control.
• c (W)
: Pauses during playback. Resumes
playback during pause.
•
: Changes the repeat settings.
Internal Memory
smartphone
For Music/Videos
Total Time
Internal Memory
--:--:--
smartphone
--:--:--
NOTE:
• If you cannot see the content of the connected
smartphone, reconnect it and wait for a while
before operating.
59
405055L5550Series_EEEV_En.indd 59
27/05/18 13:15:05
Using the Media Player
4
Select the connected device (smartphone or
tablet) and press OK.
5
Select the content to display/play and press OK.
The selected content is copied to the TV.
Once copying is complete, the content will be
displayed/played.
Precautions for playing content from a
smartphone or tablet
This TV and the smartphone or tablet are connected
according to MTP (Media Transfer Protocol).
Therefore, the following restrictions apply.
• In accordance with MTP, content from a
smartphone or tablet will be played once it
has been copied to this TV. If no space in which
to copy the content is available on the TV, the
content will not be played. In such cases, delete
copied files to create space on the TV according
to "Deleting copied files", and then select the
content again.
• Copying the content may take some time.
• Copying cannot be cancelled.
• Some files may not be viewable depending on the
device.
• An icon will be displayed on the Multi View or List
View preview screen.
• During playback, you cannot move to the next or
previous content using Z or z. Stop playback,
and select the content from the Multi View or List
View.
• Slide Show playback is not possible for photo files.
Deleting copied files
Delete copied files on the TV.
1
2
3
Display the top screen of Media Player.
Select Setup and press OK.
Select Clear cache file and press OK.
A confirmation message will appear.
4
Select Yes, and then press OK.
All copied files will be deleted.
NOTE:
When Clear cache file is performed, all copied files
will be deleted. If other files have somehow been saved
in the same location as copied files, they too will be
deleted.
60
405055L5550Series_EEEV_En.indd 60
27/05/18 13:15:06
Using the HDMI CEC Function
This feature uses CEC (Consumer Electronics Controls) technology and allows the control of HDMI CEC
compatible devices from the TV remote control via HDMI connection.
NOTE:
• This feature may not work properly depending on the connected HDMI CEC compatible device.
• To display the home screen while using the HDMI CEC function, press
on the easy remote control.
HDMI CEC Control connection
HDMI CEC functions
Before controlling the device(s):
HDMI CEC one touch play
• After completing the below connections, set the
HDMI CEC menu as you desire.
• The connected devices must also be set. For
details, see the owner’s manual for each device.
When you turn on a connected device, the TV will
automatically detect it through CEC and select
HDMI input, and the TV input will automatically
switch to that device. If the TV is in standby, it will be
turned on automatically. Configure settings on the
HDMI CEC Setup menu.
NOTE:
Even if the device is showing a menu the TV may
automatically show the video input source on-screen
display.
Connection example
TV back view
HDMI CEC system standby
Playback device
This feature automatically turns the connected
device into standby when the TV goes into standby
and conversely for the TV to switch into standby
when connected device goes into standby.
Configure settings on the HDMI CEC Setup menu.
AV amplifier
To set the HDMI CEC Control Setup
Set in the Android feature Settings.
1
NOTE:
• If several devices are connected, the HDMI CEC
Control feature may not operate properly.
• For proper operation, it is recommended that you
).
use HDMI cables with the HDMI Logo (
• This function is limited to models incorporating the
HDMI CEC Control function. Refer to the individual
owner’s manuals for compatibility information.
• Connect devices to HDMI 1 to use the HDMI CEC
function.
Select the Settings icon on the home screen,
and press the pointing key.
The Settings screen appears.
2
Select HDMI CEC Setup, and press the pointing
key.
3
Select HDMI CEC and press the pointing key to
insert a  mark.
Insert a  mark for HDMI CEC to use the HDMI
CEC function.
When a  mark has been inserted for HDMI
CEC, the following settings can be configured.
• TV Auto Power
If a HDMI CEC device is turned on or off, the
TV turns on or standby automatically.
• Auto Standby
If the TV is set to standby, the TV will send a
message to turn off the selected HDMI CEC
compatible device connected to the TV.
NOTE:
• The above functions are dependent on the
connected device and TV setting.
61
405055L5550Series_EEEV_En.indd 61
27/05/18 13:15:06
Using the HDMI CEC Function
HDMI CEC Control input source selection
If an HDMI CEC Control device with HDMI switching
capability (e.g. AV amplifier) is connected to the
HDMI input, you can select another HDMI CEC
Control device that is connected to the master HDMI
device on the input source list.
1
Press o and a list will appear on screen
showing available input sources.
2
Press  or  to select the input source that the
HDMI CEC Control devices are connected.
3
Press  and a second selection screen will
appear showing all connected HDMI CEC
Control equipment.
Inputs
1
DVD
TV
2
VCR/DVR
VIDEO1
3
CBL/SAT
VIDEO2
4
GAME/TV
HDMI 1
5
AUX
HDMI 2
HDMI 3
PC
4
Press  or  to select the desired input source,
and then press OK.
NOTE:
• These functions depend on the device connected. If
you select the HDMI CEC Control input source from
the popup window, some HDMI CEC Control devices
may automatically turn on.
• If you change the HDMI device connection or the
HDMI device settings, the HDMI CEC settings may
change.
62
405055L5550Series_EEEV_En.indd 62
27/05/18 13:15:06
Reference section
APPENDIX
Media Player Supported Formats
Media
Player
Media
Format
File
Extention
Video/Audio codec
JPEG
.jpg
.jpeg
JPEG
PNG
.png
PNG
BMP
.bmp
BMP
MP3
.mp3
MPEG-1/2 Layer3
MP4
MPEG-2/4 LC AAC
WMA
.mp4
.m4a
.wma
WAV
.wav
MKA
.mka
AVI
.avi
MPEG-2
PS
.mpg
.mpeg
.dat
MPEG-2
TS
.ts
.trp
.tp
.m2ts
Note
Data compatibility: JPEG Exif ver 2.1
Maximum number of files: 4096 per
folder
*) Some files may not be played.
Photos
Music
Videos
Maximum number of files: 4096 per
folder
WMA7/8/9/ Std
L-PCM
ADPCM
MPEG-1/2 Layer-2
MPEG-1/2 Layer-3
Video) H.264 (MPEG-4 AVC)
DivX 3, 4, 5, 6
Xvid
MJPEG
Audio) MPEG-1/2 Layer2
MPEG-1/2 Layer3
Dolby Digital (AC-3)
L-PCM
ADPCM
Video) MPEG-1 Video
MPEG-2 Video
Audio) MPEG-1/2 Layer2
MPEG-1/2 Layer3
Dolby Digital (AC-3)
L-PCM
Video) MPEG-2 Video
H.264 (MPEG-4 AVC)
Audio) MPEG-1/2 Layer2
Dolby Digital (AC-3)
L-PCM
Maximum number of files: 4096 per
folder
Maximum viewable resolution:
1920x1080
Supported format of External Subtitle:
.srt, .sub, .smi, .ssa, .ass, .txt, .psb, .ttxt,
.idx/.sub
*) Some files may not be played.
63
405055L5550Series_EEEV_En.indd 63
27/05/18 13:15:06
Reference section
Media
Player
Media
Format
File
Extention
MPEG-2
VOB
.vob
MOV
.mov
MP4
.mp4
.m4v
ASF
.asf
.wmv
.xvid
.divx
.div
DivX
Videos
MKV
.mkv
.xdiv
RealMedia .rm
.rmvb
Flash
Video
(FLV1)
.flv
3GPP
.3gp
Video/Audio codec
Note
Video) MPEG-2 Video
Audio) MPEG-1/2 Layer2
Dolby Digital (AC-3)
L-PCM
Video) H.264 (MPEG-4 AVC)
MPEG-4 part2
MJPEG
Audio) MPEG-1/2 Layer3
MPEG-2/4 LC AAC
Video) H.264 (MPEG-4 AVC)
Audio) MPEG-1/2 Layer3
MPEG-2/4 LC AAC
Video) MPEG-4 part2
Audio) ADPCM
Video) DivX 3, 4, 5, 6
Audio) MPEG-1/2 Layer3
Dolby Digital (AC-3)
Video) MPEG-2 Video
MPEG-4 part2
H.264 (MPEG-4 AVC)
Xvid
Audio) MPEG-1/2 Layer2
MPEG-1/2 Layer3
Dolby Digital (AC-3)
MPEG-2/4 LC AAC
Video) RealVideo 8, 9, 10
Audio) RA-COOK
Video) Sorenson H.263 (FLV1)
H.264 (MPEG-4 AVC)
Audio) MPEG-1/2 Layer3
MPEG-2/4 LC AAC
Video) MPEG-4 part2
H.264 (MPEG-4 AVC)
Audio) MPEG-4 LC AAC
64
405055L5550Series_EEEV_En.indd 64
27/05/18 13:15:06
Reference section
Signal Class Table
C mode
OSD
RF Frequency [MHz]
OSD
RF Frequency [MHz]
OSD
RF Frequency [MHz]
C45
663.25
S9
161.25
C1
44.25
C46
671.25
S10
168.25
C2
48.25
C47
679.25
S11
231.25
C3
55.25
C48
687.25
S13
238.25
C4
62.25
C49
695.25
S14
245.25
C5
175.25
C50
703.25
S15
252.25
C6
182.25
C51
711.25
S16
259.25
C7
189.25
C52
719.25
S17
266.25
C8
196.25
C53
727.25
S18
273.25
C9
203.25
C54
735.25
S19
280.25
C10
210.25
C55
743.25
S20
287.25
C11
217.25
C56
751.25
S21
294.25
C12
224.25
C57
759.25
S22
303.25
C21
471.25
C58
767.25
S23
311.25
C22
479.25
C59
775.25
S24
319.25
C23
487.25
C60
783.25
S25
327.25
C24
495.25
C61
791.25
S26
335.25
C25
503.25
C62
799.25
S27
343.25
C26
511.25
C63
807.25
S28
351.25
C27
519.25
C64
815.25
S29
359.25
C28
527.25
C65
823.25
S30
367.25
C29
535.25
C66
831.25
S31
375.25
C30
543.25
C67
839.25
S32
383.25
C31
551.25
C68
847.25
S33
391.25
C32
559.25
C69
855.25
S34
399.25
C33
567.25
C70
863.25
S35
407.25
C34
575.25
S36
415.25
C35
583.25
S37
431.25
S mode
C36
591.25
OSD
RF Frequency [MHz]
S38
439.25
C37
599.25
S1
105.25
S39
447.25
C38
607.25
S2
112.25
S40
455.25
C39
615.25
S3
119.25
S41
463.25
C40
623.25
S4
126.25
S51
69.25
C41
631.25
S5
133.25
S52
76.25
C42
639.25
S6
140.25
S53
83.25
C43
647.25
S7
147.25
S54
90.25
C44
655.25
S8
154.25
S55
97.25
65
405055L5550Series_EEEV_En.indd 65
27/05/18 13:15:06
Reference section
Troubleshooting
Before calling a service technician, please check the
following table for a possible cause of the symptom
and some solutions.
Symptom and solution
TV will not turn on
• Make sure the power cord is plugged in, and
then press 1.
• The remote control batteries may be dead.
Replace the batteries.
No picture, no sound
• Check the aerial connections.
No sound, picture OK
• The sound may be muted. Press 2 +, − or
.
• The station may have broadcast difficulties.
Try another channel.
Poor sound, picture OK
• The station may have broadcast difficulties.
Try another channel.
Poor picture, sound OK
• Check the aerial connections.
• The station may have broadcast difficulties.
Try another channel.
• Adjust the PICTURE menu.
Poor reception of broadcast channels
Some pixels of the screen do not light up
• The LCD display panel is manufactured
using an extremely high level of precision
technology, however, sometimes some pixels
of the screen may be missing picture elements
or have luminous spots. This is not a sign of a
malfunction.
The picture brightness varies when you switch the TV
on.
• If you switch the TV on at 0°C or under, it takes
some time for the TV to warm up.
Multiple images
• The station may have broadcast difficulties.
Try another channel.
• Aerial reception may be poor. Use a high
directional outdoor aerial.
• Check if the direction of the aerial has been
changed.
Poor colour or no colour
• The station may have broadcast difficulties.
Try another channel.
• Adjust the Tint and/or Colour in the PICTURE
menu.
The remote control does not operate
• Remove all obstructions between the remote
control and the remote control sensor on the
TV.
• The remote control batteries may be dead.
Replace the batteries.
• Check the aerial connections.
• The station may have broadcast difficulties.
Try another channel.
• Make sure the Colour System is properly set.
Teletext problems
• Check the aerial connections.
• Good performance of text depends on a good
strong broadcast signal.
If the PIN code has been forgotten:
• Use the Master PIN (code of 1276), then
change to a number of your choice. Ensure
that no-one else can use the Master PIN by
removing the Owner's Manual.
66
405055L5550Series_EEEV_En.indd 66
27/05/18 13:15:06
Reference section
Broadcast system
Specifications
Broadcast transmission systems of each country
or region
Power source
110V-240V AC, 50/60Hz
Power consumption
40" : 80 W, 0.5 W (standby)
50" : 97 W, 0.4 W (standby)
55" : 147 W, 0.4 W (standby)
Dimensions
40" : 904 mm (W) 568 mm (H) 181 mm (D)
50" : 1122 mm (W) 703 mm (H) 214 mm (D)
55" : 1241 mm (W) 771 mm (H) 214 mm (D)
Mass (Weight)
40" : 11.5 kg
50" : 17.5 kg
55" : 17.5 kg
TV system (Aerial input)
Analog broadcast systems
Channel coverage:
Asia M.E.
Country or region
Colour
Sound
Bahrain, Kuwait, Israel, Oman, PAL
Qatar,
United Arab Emirates, Yemen,
etc.
Indonesia, Malaysia,
Singapore, Thailand, etc.
B/G
China, Vietnam
D/K
PAL
China Hong Kong
PAL
I
Iraq, Islamic Republic of Iran,
Lebanon, Saudi Arabia, etc.
SECAM
B/G
Russian Federation, etc.
SECAM
D/K
Myanmar, Republic of the
Philippines, etc.
NTSC
M
Oceania
Country or region
Colour
Sound
Australia, New Zealand, etc.
PAL
B/G
Africa
Country or region
Colour
Sound
Republic of South Africa, etc.
PAL
I
PAL
B/G
(CCIR)
PAL
I
(UK)
PAL
D/K
(CHINA)
SECAM
B/G
(CCIR)
SECAM
D/K
(OIRT)
NTSC
M
(US)
CATV
South America
Country or region
VHF
UHF
CATV
VHF
UHF
CATV
VHF
UHF
CATV
VHF
UHF
CATV
VHF
UHF
CATV
VHF
UHF
Colour
Sound
Brazil
PAL
M
Chile, Colombia, etc.
NTSC
M
NOTE:
PAL, SECAM and NTSC 3.58 (MHz) are different colour
signal broadcast transmission systems applicable to
different countries or region. NTSC 4.43 (MHz) is used
in special VCRs to playback NTSC recorded video tapes
through PAL TV equipment.
NTSC
M
(JAPAN)
VHF
UHF
CATV
2 - 12
21 - 69
X - Z+2, S1 - S41
21 - 69
1 - 12
13 - 57
Z1 - Z38
2 - 12
21 - 69
X - Z+2, S1 - S41
1 - 12
21 - 69
X1 - X19
2 - 13
14 - 79
A6 - A1, A - W, AA ZZ, AAA, BBB
1 - 12
13 - 62
M1 - M10, S1 - S41
Special RF signal:
NTSC 4.43 colour system
5.5/6.0/6.5 MHz sound system
PAL 60 Hz colour system
5.5/6.0/6.5 MHz sound system
Digital broadcast system
DVB-T/T2 Broadcast systems
67
405055L5550Series_EEEV_En.indd 67
27/05/18 13:15:06
Reference section
COMPONENT VIDEO INPUT terminals (the signal
format)
480i, 480p, 576i, 576p, 720p (50/60 Hz), 1080i
(50/60 Hz)
(These signal formats are converted to match
the number of pixels of the LCD panel.)
Standard VIDEO INPUT terminals (Colour System)
PAL, SECAM, NTSC 3.58/4.43
Aspect ratio
16 : 9
Visible size (diagonal)
40" : 100.3 cm
50" : 125.7 cm
55" : 138.8 cm
Number of pixels
1920 (H) dots × 1080 (V) dots
Audio power
10 W + 10 W
Speakers
40", 50" : Main 40 × 120 mm 2pcs.
55" : Main 30 × 96 mm 2pcs.
Input/Output terminals
o (1)
COMPONENT /
VIDEO INPUT
Input
Standard video or
Component video
Phono jacks
o (2)
Supplied accessories
40L555* Series, 50L555* Series:
Owner’s manual (1), AC power code (1), Remote
control (2), Batteries (4), Screw (1) (- page
4), Pedestal stand (1), Screws (M5 x 8) (page 3)
55L555* Series:
Owner’s manual (1), Remote control (2),
Batteries (4), Screw (1) (- page 4), Pedestal
stand (1), Screws (M5 x 8) (- page 3)
• Design and specifications are subject to change
without notice.
• Never service or remodel the TV by yourself. It
may expose you to a fire hazard or dangerous
voltages.
V
Y, PB/CB, PR/CR
Audio
L / Mono +R
A/V
Input
Phono jacks
O DIGITAL AUDIO Output
Bitstream / PCM
(optical)
Output
Audio L /
O AUDIO
Phono jacks
Mono, R
(FIXED)
Input
o RGB/PC
Mini D-sub 15 pin Analogue RGB
Input
o PC/HDMI 1
(AUDIO)
3.5 mm (Diameter) stereo
Input (type A)
o HDMI1-3
19 pin
A/V Digital
HDMI (Lip Sync)
USB port 1-2
Media Player Interface version:
USB 2.0
USB class: Mass Storage
File system: FAT16 and FAT32
LAN port
RJ-45
Operating condition
Temperature 0°C - 35°C
Humidity
20% - 80% (No moisture
condensation)
68
405055L5550Series_EEEV_En.indd 68
27/05/18 13:15:06
Reference section
Trademark Information
• The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
• Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
• DivX®, DivX Certified®, DivX Plus® HD and
associated logos are trademarks of DivX, LLC and
are used under license.
Covered by one or more of the following U.S.
patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274;
8,301,793; 8,649,669; 8,656,183.
• Wi-Fi® is a registered mark of the Wi-Fi Alliance.
Wi-Fi Protected Setup™ is a mark of the Wi-Fi
Alliance.
• Android, Google, Google Play and other marks are
trademarks of Google Inc.
• The Android robot is reproduced or modified
from work created and shared by Google and
used according to terms described in the Creative
Commons 3.0 Attribution License.
• THIS PRODUCT IS LICENSED UNDER THE AVC
PATENT PORTFOLIO LICENSE FOR THE PERSONAL
AND NONCOMMERCIAL USE OF A CONSUMER
TO (i) ENCODE VIDEO IN COMPLIANCE WITH
THE AVC STANDARD (AVC VIDEO) AND/OR (ii)
DECODE AVC VIDEO THAT WAS ENCODED BY
A CONSUMER ENGAGED IN A PERSONAL AND
NONCOMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED
TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED
OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED
FROM MPEG LA, L.L.C.
SEE HTTP://WWW.MPEGLA.COM
• MPEG Layer-3 audio coding technology licensed
from Fraunhofer LLS and Thomson.
• THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NON COMMERCIAL USE
OF A CONSUMER FOR (i) ENCODING VIDEO
IN COMPLIANCE WITH THE MPEG-4 VISUAL
STANDARD (MPEG-4 VIDEO) AND/OR (ii)
DECODING MPEG-4 VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL
AND NON COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED
BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND
LICENSING MAY BE OBTAINED FROM MPEG LA, L.
L. C.
SEE HTTP://WWW.MPEGLA.COM
• This product contains technology subject to
certain intellectual property rights of Microsoft.
Use or distribution of this technology outside of
this product is prohibited without the appropriate
license(s) from Microsoft.
• This product includes technology owned by
Microsoft Corporation and can not be used or
distributed without a license from Microsoft
Licensing, GP.
69
405055L5550Series_EEEV_En.indd 69
27/05/18 13:15:06
Reference section
End User License Agreement
IMPORTANT: THIS END USER LICENSE AGREEMENT (“EULA”)
IS A LEGAL AGREEMENT BETWEEN YOU AND “TOSHIBA
CORPORATION” AND/OR “TOSHIBA LIFESTYLE PRODUCTS
& SERVICES CORPORATION” (JOINTLY OR SEVERALLY,
“TOSHIBA”). CAREFU. CAREFULLY READ THIS EULA. USE
OF ANY TOSHIBA AND THIRD PARTY SOFTWARE OR ANY
RELATED DOCUMENTATION PREINSTALLED ON, OR SHIPPED
WITH, A TOSHIBA HARDWARE PRODUCT OR OTHERWISE
MADE AVAILABLE TO YOU BY TOSHIBA IN WHATEVER FORM
OR MEDIA (COLLECTIVELY, “SOFTWARE”), WILL CONSTITUTE
YOUR ACCEPTANCE OF THESE TERMS. IF SEPARATE TERMS
ARE PROVIDED BY THE THIRD PARTY LICENSOR, THE TERMS
OF THIS EULA THAT ARE NOT INCONSISTENT WITH THOSE
SEPARATE TERMS WILL CONTINUE TO BE APPLICABLE.
NOTWITHSTANDING ANYTHING TO THE CONTRARY IN
THE SEPARATE TERMS PROVIDED BY THE THIRD PARTY
LICENSOR, TOSHIBA DOES NOT ACCEPT THE RETURN OF
COMPONENT PARTS, OR BUNDLED SOFTWARE, WHICH
HAVE BEEN REMOVED FROM THE TOSHIBA HARDWARE
PRODUCT.
IF YOU DO NOT AGREE TO THE TERMS OF THIS EULA, PLEASE
DO NOT COPY OR USE THE SOFTWARE. IF YOU WISH TO
RETURN A COMPLETE HARDWARE PRODUCT SYSTEM
(HARDWARE AND SOFTWARE), CONTACT THE TOSHIBA
DEALER WHERE YOU PURCHASED THE PRODUCT, AND
COMPLY WITH THE DEALER’S STANDARD RETURN POLICIES
AND PROCEDURES.
1. License Grant. The Software is licensed, not sold.
TOSHIBA grants to you a personal, non-transferable
and non-exclusive right to use the copy of the Software
provided with this EULA. With respect to non-TOSHIBA
Software, TOSHIBA is only passing through license
rights which may be granted by the owner/licensor
of such Software and TOSHIBA does not separately
license these rights to you. Each copy of the Software is
owned by TOSHIBA and/or its licensors. You agree you
will not copy the Software except as necessary to use
it on a single hardware product system at one location.
You agree that you may not copy the written materials
accompanying the Software. Modifying, translating,
renting, copying, distributing, transferring or assigning
all or part of the Software, or any rights granted
hereunder, to any other persons and removing any
proprietary notices, labels or marks from the Software is
strictly prohibited. Furthermore, you hereby agree not
to create derivative works based on the Software. You
may permanently transfer all of your rights under this
EULA, provided you retain no copies, you transfer all
copies of the Software, and the recipient agrees to the
terms of this EULA. If the Software is an upgrade, any
transfer must include all prior versions of the Software
and all copies thereof. See Section 12 of this EULA for
open source software.
2. Copyright. You acknowledge that no title to the
copyright or any other intellectual property rights in the
Software is transferred to you. You further acknowledge
that title and full ownership rights to the Software and
all copies thereof will remain the exclusive property of
TOSHIBA and/or its licensors, and you will not by this
EULA acquire any rights to the Software or any copies
thereof, except the license expressly set forth above. All
copies of the Software will contain the same proprietary
notices as contained in or on the Software.
3. Use of Software with Copyrighted Materials; Indemnity.
Any materials (including but not limited to any and all
works of authorship) used or stored on this hardware
product or copied on or by this hardware product
may be owned by third parties and covered by one or
more copyrights or other intellectual property rights
of the US or other countries. Using, storing, copying,
modifying, distributing, performing, or displaying
such materials on this hardware product, or by or with
this hardware product, or transmitting, sharing, or
otherwise sending copies of such materials to other
hardware products or other persons, may violate the
copyrights or other intellectual property rights of
such third parties and may subject you to civil and/or
criminal liability.
You shall indemnify and hold TOSHIBA harmless from
any and all damages, liabilities, costs, and expenses,
including reasonable attorneys' fees and amounts
paid in settlement of third party or government
claims, incurred by TOSHIBA as a result of claims
alleging the violation of any third party copyrights
or other intellectual property rights based upon
(a) using, storing, copying, modifying, distributing,
performing, or displaying any third party materials on
this hardware product, or by or with hardware product,
or transmitting, sharing, or otherwise sending copies
of such materials to other hardware products or other
persons, or (b) your noncompliance with this EULA.
4. Critical Applications. The Software is not designed or
recommended for any “critical applications.” “Critical
applications” means life support systems, medical
applications, connections to implanted medical
devices, commercial transportation, nuclear facilities
or systems or any other applications where product
failure could lead to injury to persons or loss of life or
catastrophic property damage. Accordingly, SHOULD
YOU DECIDE TO USE THIS SOFTWARE FOR ANY CRITICAL
APPLICATION TOSHIBA disclaims any and all liability
arising out of the use of the SOFTWARE in any critical
APPLICATION. If YOU use the SOFTWARE in a critical
application, YOU, and not TOSHIBA, assume full
responsibility for such use. Further you shall indemnify
and hold TOSHIBA harmless from any and all damages,
liabilities, costs, and expenses, including reasonable
attorneys' fees and amounts paid in settlement of third
party or government claims, incurred by TOSHIBA as a
result of or in any way arising from such use.
5. Limitations on Reverse Engineering, Decompilation and
Disassembly. You may not reverse engineer, decompile,
or disassemble the Software in whole or in part, except
and only to the extent that such activity constitutes
a fair use under applicable copyright law, or has a
legitimate business purposes of accessing information
that is not protected by any intellectual property rights,
or is otherwise permitted by the applicable license for
the Software or applicable law notwithstanding this
limitation.
6. Disclaimer of Warranty and Limited Warranty.
TOSHIBA’S SOLE OBLIGATIONS WITH RESPECT TO
TOSHIBA SOFTWARE IS SET FORTH IN THIS EULA.
UNLESS OTHERWISE STATED IN WRITING, ALL TOSHIBA
SOFTWARE ARE PROVIDED ON AN “AS IS” BASIS
WITHOUT WARRANTY OF ANY KIND BY TOSHIBA.
UNLESS NON-TOSHIBA SOFTWARE MANUFACTURERS,
SUPPLIERS EXPRESSLY OFFER THEIR OWN WARRANTIES
70
405055L5550Series_EEEV_En.indd 70
27/05/18 13:15:06
Reference section
IN WRITING IN CONNECTION WITH YOUR USE OF
THEIR NON-TOSHIBA SOFTWARE, SUCH NON-TOSHIBA
SOFTWARE IS PROVIDED ON AN “AS IS” BASIS WITHOUT
WARRANTY OF ANY KIND BY THE MANUFACTURER,
SUPPLIER, OR PUBLISHER OF SUCH NON-TOSHIBA
SOFTWARE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW, TOSHIBA AND ITS LICENSORS AND SUPPLIERS
DISCLAIM ALL WARRANTIES WITH REGARD TO THE
SOFTWARE, EITHER EXPRESS -IMPLIED, OR STATUTORY,
INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF
NONINFRINGEMENT OF THIRD PARTY RIGHTS, AND
THE IMPLIED WARRANTIES AND/OR CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE SOFTWARE IS WITH YOU.
NEITHER TOSHIBA NOR ITS LICENSORS WARRANT THAT
THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL
MEET YOUR REQUIREMENTS OR THAT THE OPERATION
OF THE SOFTWARE WILL BE UNINTERRUPTED OR
ERROR-FREE.
NO ORAL OR WRITTEN INFORMATION OR ADVICE
GIVEN BY TOSHIBA OR A TOSHIBA AUTHORIZED
REPRESENTATIVE SHALL CREATE A WARRANTY OR IN
ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION
OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION
MAY NOT APPLY TO YOU.
7. Limitation of Liability. TOSHIBA’ AND/OR ITS LICENSORS’
ENTIRE LIABILITY AND YOUR SOLE AND EXCLUSIVE
REMEDY UNDER THIS EULA SHALL BE LIMITED TO THE
AMOUNT ACTUALLY PAID BY YOU SEPARATELY FOR THE
SOFTWARE OR U.S. $10.00 WHICHEVER IS LESS. IN NO
EVENT SHALL TOSHIBA OR ITS LICENSORS BE LIABLE TO
YOU FOR ANY CONSEQUENTIAL, SPECIAL, INCIDENTAL
OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS
OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
LOSS OF BUSINESS INFORMATION/DATA, FOR LOSS OF
PRIVACY ARISING OUT OF OR IN ANY WAY RELATED
TO THE USE OF OR INABILITY TO USE THE SOFTWARE
PRODUCT OR OTHERWISE IN CONNECTION WITH ANY
PROVISION OF THIS EULA, EVEN IF TOSHIBA OR ANY
LISENSORS HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES AND EVEN IF THE REMEDY FAILS OF
ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL TOSHIBA
OR ITS LICENSORS BE LIABLE FOR ANY CLAIM BY A
THIRD PARTY. SOME STATES/JURISDICTIONS DO NOT
ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
MAY LAST, OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO SUCH
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE/JURISDICTION TO STATE/JURISDICTION.
8. Export Laws. This EULA involves products, software
and/or technical data that may be controlled under the
laws and regulations of the United States and other
countries, including but not limited to the United
States Export Administration Regulations, or any other
applicable law, regulation or order (“Export Laws”).
You shall comply with all Export Laws to assure that
the Software is not exported, directly or indirectly, in
contravention of the Export laws.
9. Governing Law. This EULA will be governed by the laws
10.
11.
12.
13.
14.
of Japan [or other applicable country], excluding its
conflict of law provisions.
Severability. If any provision of this EULA shall be held
to be invalid, illegal or unenforceable, the validity,
legality and enforceability of the remaining provisions
hereof shall not in any way be affected or impaired.
No Waiver. No waiver of any breach of any provision
of this EULA shall constitute a waiver of any prior,
concurrent or subsequent breach of the same or any
other provisions hereof, and no waiver shall be effective
unless made in writing and signed by an authorized
representative of the waiving party. To the extent the
terms of any TOSHIBA policies or programs for support
services conflict with the terms of this EULA, the terms
of this EULA shall control.
Open Source Software. Portions of the Software
include software files subject to certain open source
license agreements, and such open source software
files are subject to the notices and additional terms and
conditions that are referenced in “Legal information” of
device’s “Settings” menu. Such open source software
files are provided on an “AS IS” basis to the maximum
extent permitted by applicable law.
Please carefully read “Open Source License” section for
the relevant copyright and licensing terms. If there is
any discrepancy between the terms and conditions of
the applicable open source license agreement and the
EULA, the terms and conditions of the applicable open
source license agreement prevail with respect to the
applicable open source software.
Until the date that is three years after you acquire the
Software, you may obtain a copy of the source code
corresponding to the binaries for GPL-licensed file
by sending a request to TOSHIBA customer service at
http://www.regza-asia.com/support/oss, and TOSHIBA
will send you a link to such source code.
Notice to your information
(i) When you access Wi-Fi® connections, the Wi-Fi®
location information may be stored on your device.
(ii) If you use third-party applications on this device,
any information those applications collect
(including location-based information) may be sent
to third parties and merged with other customer
information subject to their respective privacy
policies. Please review them carefully. You may
limit access to location information by others by
changing your Location Settings.
Entire Agreement. This Agreement sets forth the
entire agreement and understanding between you
and TOSHIBA as to the subject matter hereof and
supersedes all prior agreements, negotiations or
understandings with respect thereto. This Agreement
may not be changed, altered or amended except by
TOSHIBA.
Rev: March, 2015
71
405055L5550Series_EEEV_En.indd 71
27/05/18 13:15:06
40L5550
TRA
REGISTERED No:
ER38254/15
OMAN - TRA
R/2452/15
D100428
DEALER No:
DA35500/14
50L5550
TRA
REGISTERED No:
ER38277/15
OMAN - TRA
R/2451/15
D100428
DEALER No:
DA35500/14
55L5550
TRA
REGISTERED No:
ER38278/15
OMAN - TRA
R/2450/15
D100428
DEALER No:
DA35500/14
© TOSHIBA GULF FZE
2015 All rights reserved.
© TOSHIBA ELARABY VISUAL & APPLIANCES MARKETING COMPANY
2015 All rights reserved.
Reproduction in whole or in part without written permission is strictly prohibited.
405055L5550Series_EEEV_En.indd 72
27/05/18 13:15:07
Download PDF
Similar pages