TMX425 & TMX428 COMPARISON
TMX425
TMX428
7.0” from floor
22” x 63”
Cushioned and reversible,
self lubricating
Anti-static, 2-ply Polyester with
PVC textured surface
Self aligning with adjustable rear
roller
33” x 88”
All steel chassis
Powder coat white body with black
handrails
8 possible fixed locations
Not available
500 Lbs.
480 Lbs.
7.0” from floor
22” x 63”
Cushioned and reversible,
self lubricating
Anti-static, 2-ply Polyester with
PVC textured surface
Self aligning with adjustable
front and rear roller
33” x 78.5”
All steel chassis
Powder coat subdued white with
charcoal gray handrails
Right hand or Left hand Estop
Standard – opposite of Estop
500 Lbs.
425 Lbs.
Classic TRACKMASTER® Serial
Communication Protocol
RS232
Classic TRACKMASTER®
Serial Communication Protocol
RS232 and USB 1.0
Drive Motor
2.2 HP AC inverter drive
Power Requirements (dedicated)
110-120V, 50/60Hz, 20 amp
208-240V, 50/60Hz, 15 amp
Not available
Manually tensioned
Linear Actuator with plastic gears
4HP continuous (6HP peak)
PWM DC brushless servo,
improved torque at all speeds.
110-120V, 50/60Hz, 20 amp
208-240V, 50/60Hz, 15 amp
Belt locks 45 secs. when stopped
Self adjusting
Linear Actuator with metal gears
.5-12 MPH
Self calibrating
0-25%
.5-12 MPH, .1-15 MPH (On CP)
Self calibrating
0-25%
Domestic 600 LBS
International 625LBS
Domestic 96” x 41”x 71”
International 88” x 33.5”x 28.75”
Domestic 161.6 Cubic FT
Shipping Class 250
International 50.75 Cubic FT
Shipping Class 92.5
Domestic & International
550LBS
Domestic & International
84” x 36” x 30.5”
Domestic & International
53.3 Cubic FT
Shipping Class 92.5
PHYSICAL CHARACTERISTICS
Step-up Height
Running Deck Area
Running Deck
Running Belt
Belt Tracking
Floor Space Requirement
Construction
Cosmetic Finish
Emergency Stop Button
Emergency Tether
User Weight Capacity
Treadmill Net Weight
INTERFACE
Communication Protocol
Communication Port
DRIVE SYSTEM
No-slip elevated belt (at test end)
Drive Belt
Elevation Motor
PERFORMANCE
Speed
Speed and Elevation Calibration
Elevation
SHIPPING
Crate Weight
Crate Size
Shipping Class
TRACKMASTER® TMX428
TRACKMASTER® TMX428CP
TRACKMASTER® TMX428CP Controller Features
TMX428CP Operation in Manual Mode:
Displays incline, speed, time, distance, total calories, calories per minute, pace, heart rate, target
heart rate, and METS. Energy is calculated based on gender and user weight. Target heart rate is
calculated based on user’s gender and age.
 Large LCD display
- Speed (0.1 MPH to 15.0 MPH with speed increment of 0.1 MPH))
(0.2 KPH to 24.0 KPH with speed increment of 0.1 KPH)
- Pace (minutes/mile or km)
- Distance
- METS, calories/minutes, total calories
- Elevation (.5% increment to 25% standard)
- Body Weight (user input)
- Elapsed time
 Two built-in accessory holders
 Dual stop buttons
 Pull Tether (standard)
 Calories/METS base on gender and user weight
 Cool down command
TMX428CP Operation in Programmable Mode:
Fitness Workouts and Custom Workouts have the same readouts as the manual operation. The
Pre-Programmed Protocol workouts display time, stage countdown, incline, heart rate, target
heart rate, and speed. In addition five pre-programmed protocols, five fitness workouts, and five
custom workouts with up to 10 programable stages.
 Pre-Programmed Protocols
- Bruce Protocol (Stage countdown)
- Gerkin Protocol (Stage countdown and routine scoring)
- Naughton Protocol (Stage countdown)
- Balke “Male” Protocol (Stage countdown)
- Balke “Female” Protocol (Stage countdown)
 Fitness Workouts
- Interval Workout
- Speed Interval Workout
- High Intensity Speed Interval Workout
- Peek Interval Workout
- High Intensity Peek Interval Workout
 Custom Workouts
- Five user defined programs (Up to 10 stages in each workout)
Download PDF
Similar pages