10 Gigabit Ethernet Easy Smart Switch

Product Highlights
10 Gigabit Ethernet Connection
10 Gigabit Ethernet ensures that high bandwidth
demands can be fulfilled easily and allows for device
flexibility across your network
Improved Power Efficiency
Innovative D-Link Green features help conserve
energy without sacrificing performance so you can
reduce operating costs and protect the environment
Smart and Flexible Management
Powerful switch management functions can be
performed through a web management interface or
through the client-based utility
DXS-1100-10TS/16TC
10 Gigabit Ethernet Easy Smart Switch
Features
The DXS-1100-10TS/16TC 10 Gigabit Ethernet Easy Smart Switch is an Easy Smart Layer 2 10
Green Technology
wishing to deploy 10 Gb Ethernet. It is ideal for server farms or as a network aggregation device
• Link Status Detection
• LED, Port Shut-off
• Port Standby
• System Hibernation
Security
Gb Ethernet switch which provides an entry-level solution for Small and Medium Businesses
and provides a cost-effective but feature-rich solution to 10 Gb Ethernet requirements.
Energy Saving
The DXS-1100-10TS/16TC incorporates D-Link Green technology for increased energy efficiency.
Smart fans and temperature sensors ensure that the fans are running at the optimum speed to
• Port Security
cool the system. If the environment temperature is suitable and the switch is at low utilization,
• D-Link Safeguard Engine
the smart fans can reduce their speed, resulting in lower power consumption and noise output.
• ARP Spoofing Prevention
The Link Status feature can reduce power utilization by powering-down inactive ports and
• SSL
putting them into sleep mode. The DXS-1100-10TS/16TC also takes its Green credentials one
Traffic Monitoring & Bandwidth Control
• Port Mirroring/Bandwidth Control
• Broadcast/Multicast/Unicast Storm Control
Advanced Features
step further by incorporating a chipset with advanced silicon technology for reduced power
utilization.
Easy to Deploy
The DXS-1100-10TS/16TC supports an intuitive client-based utility (SmartConsole Utility or
• Traffic Segmentation
D-Link Network Assistant Utility) and a web-based management interface. The client-based
• Port-based VLAN
utility allows customers to discover all switches in the D-Link Smart Switch family within the
• 802.1p Priority Queue Mapping
same L2 network segment. With this utility, users do not need to change the IP address of their
• Auto Surveillance VLAN
PC, and this also makes initial setup of the Smart Switches quick and easy. Switches within
• Voice VLAN
the same L2 network segment that are connected to the user’s PC are displayed on-screen
• Loopback Detection
for instant access. This allows for extensive switch configuration and basic setup of discovered
• Cable Diagnostics
devices, including password changes and firmware upgrades. The graphic web-based
• LLDP-MED
management interface provides a user-friendly interface that enables network administrators
to remotely control their network down to the port level.
DXS-1100-10TS/16TC
10 Gigabit Ethernet Easy Smart Switch
Auto Surveillance VLAN and Bandwidth Control
Advanced Features
The DXS-1100-10TS/16TC supports Auto Surveillance VLAN (ASV), and Auto
The DXS-1100-10TS/16TC is equipped with advanced security features such
Voice VLAN, which are best suited for Voice over IP (VoIP) and video surveillance
as Static MAC, Storm Control, and IGMP Snooping. Static MAC allows users to
deployments. Auto Surveillance VLAN is a new, industry-leading technology
create a MAC whitelist for specific ports, helping administrators limit network
that the DXS-1100-10TS/16TC Gigabit Ethernet Smart Switch provides. This
access to authorized devices only. Storm Control monitors broadcast,
technology consolidates data and surveillance video transmission through a
multicast, or unknown unicast traffic and will start blocking or discarding
single unit, thus sparing businesses the expense of dedicated hardware and
packets which could flood the network when the defined threshold is
facilities. ASV also ensures the quality of real-time video for monitoring and
exceeded. IGMP Snooping is able to reduce the loading of L3 multicast
control without compromising the transmission of conventional network
routers and save bandwidth in network throughput.
data. The Auto Voice VLAN technology enhances VoIP functionality by
automatically placing voice traffic from an IP phone into an assigned VLAN.
Easy Troubleshooting
With higher priority and individual VLAN, these features guarantee the quality
The DXS-1100-10TS/16TC features Loopback Detection and Cable Diagnostics
and security of VoIP traffic across the network. In addition, Bandwidth Control
can reserve bandwidth on a per port basis for important functions that
require larger bandwidth or might have high priority.
to help network administrators find and solve network problems quickly and
easily. Loopback Detection is used to detect loops created by a specific port
and automatically shuts down the affected port. Cable Diagnostics help
network administrators quickly examine the quality of the copper cables,
recognize the cable type, and detect cable errors.
DXS-1100-10TS/16TC
10 Gigabit Ethernet Easy Smart Switch
Technical Specifications
General
DXS-1100-10TS
DXS-1100-16TC
Hardware Version
• A1
• 17-inch rackmount width
• 1U height
Size
Number of Ports
• 12 port 10GBASE-T
• 2 port 10GBASE-T/SFP+ combo design
• 2 port SFP+
• 8 port 10GBASE-T
• 2 port SFP+
• IEEE 802.3u 100BASE-TX Fast Ethernet
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet
• IEEE 802.3az compliance
• IEEE 802.3an 10GBASE-T 10GbE over copper
• IEEE 802.3ae 10GbE over fiber
• IEEE 802.3z 1000BASE-X
• Auto MDI/MDIX support for 1000/10GBASE-T
Port Functions
Performance
Switching Capacity
Maximum Forwarding Rate
• 200 Gbps
• 320 Gbps
• 148.81 Mpps
• 238.095 Mpps
MAC Address Table Size
• 16K entries
Packet Buffer
• 2 Mbps
Flash Memory
• 2 Mbytes
Power Consumption
Maximum Power Consumption
• 50.9 W
• 84.1 W
Standby Power Consumption
• 16.1 W
• 26.7 W
Physical
Power Input
MTBF
Acoustics
Heat Dissipation
Weight
Dimensions
Ventilation
Operating Temperature
• 100 to 240 V AC
• 585,959 hours
• 489,221 hours
• 46.4 dB(A)
• 45.9 dB(A)
• 173.57 BTU/h
• 277.54 BTU/h
• 2.71 kg (5.97 pounds)
• 2.94 kg (6.48 pounds)
• 441 x 44 x 210 mm (17.36 x 1.73 x 8.27 inches)
• 441 x 44 x 210 mm (17.36 x 1.73 x 8.27 inches)
• 2 x Smart Fans
• -5 to 50 °C (23 to 122 °F)
Storage Temperature
• -40 to 70 °C (-40 to 158 °F)
Operating Humidity
• 0% to 95% non-condensing
Storage Humidity
• 0% to 95% non-condensing
EMI
Safety
• CE, FCC, RCM, VCCI, BSMI, CCC
• cUL, CB, CE, CCC, BSMI
DXS-1100-10TS/16TC
10 Gigabit Ethernet Easy Smart Switch
Software Features
VLAN
• 802.1Q VLAN
• Port-based VLAN
• 128 VLAN groups
• Configurable VID
• 1-4094
• Voice VLAN
• Auto Surveillance VLAN
• Asymmetric VLAN
L2 Features
• MAC Address Table
• Up to 16384 entries
• Static MAC Address
• 512 entries
• IGMP Snooping
• IGMP v1/v2 Snooping
• Supports up to 512 IGMP groups
• Supports 512 static multicast addresses
• MLD Snooping
• MLD v1 Snooping
• MLD v2 Awareness
• Supports up to 512 MLD groups
• Supports 512 static multicast addresses
• LLDP
• LLDP-MED
• Spanning Tree Protocol
• 802.1D STP
• 802.1w RSTP
• Flow Control
• 802.3x Flow Control
• HOL Blocking Prevention
• Port Mirroring
• One-to-One
• Many-to-One
• Support Mirroring for Tx/Rx/Both
• Link Aggregation
• 802.1AX
• 802.3ad
• Maximum of 5 groups/ 4 ports per group
• Jumbo Frame
• Up to 9 KB
• Loopback Detection
Quality of Service (QoS)
• CoS based on
• 802.1p Priority
• 802.1p Priority Queue
• 8 queues per port
• Queue Handling
• Strict Priority Queue
• Weighted Round Robin (WRR)
• Bandwidth Control
• Port-based (Ingress/Egress, min. granularity 64 Kbps)
L3 Features
• IPv6 Neighbor Discovery (ND)
Security
• Broadcast/Multicast/Unicast Storm Control
• D-Link Safeguard Engine
• Traffic Segmentation
• SSL
• Support v1/v2/v3
• Support IPv4/IPv6
Operations, Administration, and
Maintenance
• Cable Diagnostics
AAA
• Authentication for management access
Management
• Web-based GUI
• D-Link Network Assistant Utility
• TFTP client
• SNMP
• Support v1/v2c/v3
• SNMP trap
• LLDP
• LLDP-MED
• System Log
• SNTP
• ICMPv6
• Dual Images
• Dual Configurations
• RMON v1/v2
Green Technology
• Power Saving by:
• Link Status
• Cable Length
• LED Shutoff
• Port Shutoff
• System Hibernation
• ARP Spoofing Prevention
• Max. 128 entries
• DoS Attack Prevention
• Port Security
• Supports up to 64 MAC address per port
• Duplicate Address Detection (DAD)
DXS-1100-10TS/16TC
10 Gigabit Ethernet Easy Smart Switch
MIB/RFC Standards
• RFC783 TFTP
• RFC951 BootP/DHCP Client
• RFC1157 SNMP v1, v2, v3
• RFC1213 MIB II
• RFC1215 MIB Traps Convention
• RFC1350 TFTP
• RFC1493 Bridge MIB
• RFC1542 Bootp/DHCP Client
• RFC1769 SNTP
• RFC1901 SNMP v1, v2, v3
• RFC2131 Bootp/DHCP Client
• RFC2246 SSL
• RFC2461 Neighbor Discovery for IPv6
• RFC2570 SNMP v1, v2, v3
• RFC2575 SNMP v1, v2, v3
• RFC2598 CoS
• RFC2674 802.1p MIB
• RFC3164 System Log
• RFC3195 System Log
• RFC3411~17 SNMP
• RFC4213 IPv4/IPv6 dual stack
• RFC4293 IPv6 SNMP mgmt. Interface MIB
• RFC4363 802.1p MIB
• RFC4861 Neighbor Discovery for IPv6
• DLINK Private MIB
• LLDP MIB
• Zone Defense MIB
• Interface Group MIB
Order Information
Part Number
Description
DXS-1100-10TS
8-port 10GBASE-T and 2-port SFP+
DXS-1100-16TC
12-port 10GBASE-T and 2-port SFP+ and 2-port 10GBASE-T/SFP+ combo design
Optional 10 Gigabit Ethernet SFP+ Direct Attach Cables
DEM-CB100S
10GbE SFP+ 1 m Direct Attach Cable
DEM-CB300S
10GbE SFP+ 3 m Direct Attach Cable
DEM-CB700S
10GbE SFP+ 7 m Direct Attach Cable
Optional Gigabit Ethernet SFP transceivers
DGS-712
1000BASE-T Copper SFP Transceiver
DEM-302S-LX
1000BASE-LX Single-Mode, 2 km
DEM-310GT
1000BASE-LX Single-Mode, 10 km
DEM-311GT
1000BASE-SX Multi-mode, 550 m
DEM-312GT2
1000BASE-SX Multi-mode, 2 km
DEM-314GT
1000BASE-LHX Single-mode, 50 km
DEM-315GT
1000BASE-ZX Single-mode, 80 km
DEM-302S-BXD
1000BASE-BX-D Single-Mode, 2 km (TX-1550/RX-1310 nm)
DEM-302S-BXU
1000BASE-BX-U Single-Mode, 2 km (TX-1310/RX-1550 nm)
DEM-330T
1000BASE-BX-D Single-Mode, 10 km (TX-1550/RX-1310 nm)
DEM-330R
1000BASE-BX-U Single-Mode, 10 km (TX-1310/RX-1550 nm)
DEM-331T
1000BASE-BX-D Single-Mode, 40 km (TX-1550/RX-1310 nm)
DEM-331R
1000BASE-BX-U Single-Mode, 40 km (TX-1310/RX-1550 nm)
Optional 10 Gigabit Ethernet SFP+ transceivers
DEM-431XT
10GBASE-SR Multi-Mode, OM1: 33 m/OM2: 82 m/OM3: 300 m (w/o DDM)
DEM-431XT-DD
10GBASE-SR Multi-Mode, OM1: 33m/OM2: 82m/OM3: 300m (with DDM)
DEM-432XT
10GBASE-LR Single-Mode, 10 km (w/o DDM)
DEM-432XT-DD
10GBASE-LR Single-Mode, 10 km (with DDM)
DXS-1100-10TS/16TC
10 Gigabit Ethernet Easy Smart Switch
DEM-433XT
10GBASE-ER Single-Mode, 40 km (w/o DDM)
DEM-433XT-DD
10GBASE-ER Single-Mode, 40 km (with DDM)
DEM-434XT
10GBASE-ZR Single-Mode, 80 km (w/o DDM)
DEM-436XT-BXD
10GBASE-LR Single-Mode, 20 km (TX-1330/RX-1270 nm) (w/o DDM)
DEM-436XT-BXU
10GBASE-LR Single Mode, 20 km (TX-1270/RX-1310 nm) (w/o DDM)
Optional 10 Gigabit Ethernet Adapter
DXE-810S
Single Port 10GbE SFP+ PCI Express Adapter
DXE-810T
Single Port 10GBASE-T RJ-45 PCI Express Adapter
DXE-820T
Dual Port 10GBASE-T RJ-45 PCI Express Adapter
Updated 2015/09/24
Specifications are subject to change without notice. D-Link is a registered trademark of D-Link
Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners.
©2015 D-Link Corporation. All rights reserved. E&OE.
Download PDF
Similar pages