FAST ETHERNET ADAPTER 10/100 Fast Ethernet PCI Adapter The made-in-U.S.A. WideBand Professional Series 10/100 Fast Ethernet Adapter integrates next generation technology to provide superior performance and ease of use for today's 10/100 Local Area Network environments. The WideBand Professional Series 10/100 Fast Ethernet Adapter utilizes the reliability of single chip design with advanced engineering to provide unmatched speed and integrity. Maximized Bandwidth Over Existing Wiring -- The WideBand Professional Series 10/100 Fast Ethernet Adapter is one of the only 10/100 adapters to meet the stringent certification standards of the WideBand Gigabit Networking Alliance (WGNA). The WGNA certification assures users that the products can be used on all varieties of Category-5 cable infrastructures. Products must be able to transmit data to a full 100 meters with a bit error rate of less than 1 per million. This testing is important because the cabling infrastructure is the foundation on which the network operates. The network should provide optimum performance on all grades of Category 5 cables. The WideBand Professional Series 10/100 Fast Ethernet Adapter has shown these optimum performance levels. Advanced Features -- This Adapter features industry-leading remote management, as well as features such as Wake-on-LAN (WOL) and ACPI power management. These remote management tools provide easy administration, saving time and money for network managers. High Throughput -- The WB100TPRO uses 802.3x flow control for efficient data delivery and prevention of data overflow. It also incorporates bus-mastering technology to reduce utilization of the CPU. Bus mastering provides a burst of 512 bytes, which greatly improves the total data throughput. 10/100 Flexibility -- The WideBand Professional Series Ethernet 10/100 Adapter supports Plug and Play installation for simple, quick installation, and will auto-sense the available data rate of 10 Mbps or 100 Mbps. Link LED's indicate which speed the Adapter is using. This provides an easy migration path from 10 Mbps networks to 100 Mbps networks. Wide Driver Support -- The Adapter supports all major operating systems, including Microsoft Windows 95/98, Microsoft Windows 2000, Microsoft NT, Novell Netware, Red Hat Linux, and SCO OpenServer (Unix). Specifications High Performance Uses the National Semiconductor DP83815 Controller for High Performance Advanced Software Features IEEE 802.3x Full Duplex Flow Control Virtual LAN (VLAN) and Long Frame Support Compatibility 10/100 Mbps Plug and Play 32-bit PCI 2.2 Auto Negotiation Full Duplex support for 10 and 100 Mb/s data rates Uses Pre-existing Cat-5 cabling RJ-45 Connector WGNA Certified Operating Systems Supported Windows for Workgroups 3.11 Windows NT 3.51, 4.0 Windows 95,98 Windows 2000 Novell Client 32 for DOS Novell Client for Windows 95/98 Novell Server 4.10, 4.11, 5.0 Red Hat Linux SCO Open Server (Unix) NDIS 2.0 for DOS driver (for operating systems that require it) Network Management Magic Packet ACPI Power Management Technical Features Internal 2KB transmit and 2KB Receive Data FIFOs Four LED Indicators Activity, 10 Mbps Link, 100 Mbps Link, Power Management Standards IEEE 802.3 WGNA Ordering Information Part Number WB100TPRO WB100TPRO-S3 WB100TPRO-12 WB100TPRO-24 Description 10/100 Fast Ethernet PCI Adapter, VLAN, WGNA Certified 3-year Support Package for WB100TPRO 10/100 Fast Ethernet PCI Adapter-12 pack 10/100 Fast Ethernet PCI Adapter-24 pack WideBand Corporation -- www.wband.com Sales: (888) 663-3050 Fax: (660) 663-3736 Customer & Technical Support: (888) 220-4020 Copyright 2005 WideBand Corporation -- All Rights Reserved. Version 10.05 WB100TPRO-DS Made in U.S.A. Specifications in this document are subject to change without notice.