Data sheet
6EP1333-1LD00
PSU100D 24 V/6.2 A STABILIZED POWER SUPPLY INPUT: 100240 V AC OUTPUT: 24 V DC/6.2 A
Technical specifications
Product
PSU100D
Power supply, type
24 V/6.2 A
Input
Input
1-phase AC
Rated voltage value Vin rated
100 ... 240 V
Voltage range AC
85 ... 264 V
Wide-range input
Yes
Mains buffering at Iout rated, min.
15 ms; at Vin = 115/230 V
Rated line frequency
50 ... 60 Hz
Rated line range
47 ... 63 Hz
Input current at rated input voltage 100 V Rated
value
3.1 A
Input current at rated input voltage 240 V Rated
value
2 A
Switch-on current limiting (+25 °C), max.
75 A
I²t, max.
6.5 A²·s
Built-in incoming fuse
internal
Protection in the mains power input (IEC 898)
Recommended miniature circuit breaker: from 10 A characteristic
C or from 16 A characteristic B
Output
Output
Controlled, isolated DC voltage
Rated voltage Vout DC
24 V
Total tolerance, static ±
2 %
Static mains compensation, approx.
0.5 %
6EP1333-1LD00
Page 1/3
12.03.2015
Changes preserved
© Copyright Siemens AG
Static load balancing, approx.
1 %
Residual ripple peak-peak, max.
100 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)
100 mV
Adjustment range
22 ... 28 V
Product function Output voltage adjustable
Yes
Output voltage setting
via potentiometer
Status display
Green LED for 24 V OK
On/off behavior
Overshoot of Vout < 2 %
Startup delay, max.
1 s
Voltage increase time of the output voltage maximum
30 ms
Rated current value Iout rated
6.2 A
Current range
0 ... 6.2 A
● Note
+50 ... +70 °C: Derating 2.5%/K
Active power supplied typical
150 W
Parallel switching for enhanced performance
Yes
Numbers of parallel switchable units for enhanced
performance
2
Efficiency
Efficiency at Vout rated, Iout rated, approx.
86 %
Power loss at Vout rated, Iout rated, approx.
24 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %),
max.
0.5 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ±
typ.
5 %
Protection and monitoring
Output overvoltage protection
< 35 V
Current limitation, typ.
7.4 A
Property of the output Short-circuit proof
Yes
Short-circuit protection
Electronic shutdown, automatic restart
Enduring short circuit current RMS value typical
16 A
Overload/short-circuit indicator
-
Safety
Primary/secondary isolation
Yes
Galvanic isolation
Safety extra low output voltage Vout according to EN 60950-1
Protection class
Class I
Leakage current maximum
3.5 mA
Leakage current typical
1 mA
CE mark
Yes
UL/CSA approval
Yes
UL/cUL (CSA) approval
cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259;
cURus (UL 60950-1, CSA C22.2 No. 60950-1), File E151273
6EP1333-1LD00
Page 2/3
12.03.2015
Changes preserved
© Copyright Siemens AG
Explosion protection
-
Certificate of suitability IECEx
No
Certificate of suitability NEC Class 2
No
FM approval
-
CB approval
Yes
Marine approval
-
Degree of protection (EN 60529)
IP20
EMC
Emitted interference
EN 55022 Class B
Supply harmonics limitation
-
Noise immunity
EN 61000-6-2
Operating data
Ambient temperature during operation
● Note
-10 ... +70 °C
with natural convection
Ambient temperature during transport
-40 ... +85 °C
Ambient temperature during storage
-40 ... +85 °C
Mechanics
Connection technology
screw-type terminals
Connections Supply input
L, N, PE: 1 screw terminal each for 0.3 ... 1.3 mm² singlecore/finely stranded
Connections Output
+, -: 2 screw terminals each for 0.3 ... 1.3 mm²
Connections Auxiliary
-
Width of the enclosure
97 mm
Height of the enclosure
178 mm
Depth of the enclosure
38 mm
Weight, approx.
0.55 kg
Installation
Wall mounting
Other information
Specifications at rated input voltage and ambient temperature +25
°C (unless otherwise specified)
6EP1333-1LD00
Page 3/3
12.03.2015
Changes preserved
© Copyright Siemens AG
Download PDF
Similar pages