mbox-MAP-130 Datasheet
Product Overview:
mbox-MAP-130 AP is designed for wireless deployment in hotels, offices, residential buildings
and settings alike. The wall-mountable AP has the same size as a standard 86-type faceplate
with integrated Ethernet and voice ports. Featuring a concise design and easy deployment, the
AP enables zero disruption to the interior finishes and offers the best solution for scenarios with
delicate interior design.
The dual-radio, dual-band AP supports concurrent operation of 802.11a/n/ac and 802.11b/g/n,
delivering data rates of up to 300Mbps in 802.11n and 867Mbps in 802.11ac. The AP provides
4 10/100Mbps RJ-45 ports and 1 RJ-45 Voice/PoE Pass-through port (RJ-11 combo), delivering
optimal wireless network coverage and cost protection with additional wired network interfaces
and voice ports.
Features of mbox-MAP-130:
• High-performance 802.11ac Wall AP
• Easy and Fast Deployment
• Stylish Casing in Different Colors
• Full Signal Coverage
• Unified Management of Autonomous and Controller-based Modes
• Industry-leading Double Security Designs
• User Access Control
• Security Protection
• Multiple Easy-To-Use Authentication Modes
Sales Contact: sales@ransnet.com
www.ransnet.com
!1
mbox-MAP-130 Datasheet
Model
mbox-MAP-130
Radio
Dual-band dual-stream
Protocol
Model
Intelligent load
balancing based on
the number of users
or traffic
802.11a/n/ac, 802.11b/g/n
Spatial Streams
2 Spatial Streams, 2x2 MIMO
Max Throughout
Access rate of 300Mbps with 2.4GHz, 866Mbps
with 5G
Transmit Power
≤100mW (20dBm, RF card transmit power only)
STA Limit
Bandwidth Limit
116 x 86 x 39
Weight
PSK, Web, and
802.1x authentication
0.24kg
Data encryption
Certifications
CE
Service Port
Front: 4 10/100/1000M Ethernet ports
Side: 1 RJ-45 Voice/PoE pass-through port
(RJ-11 combo)
Rear:
1 10/100/1000M uplink port
1 RJ-45 port (RJ-11 combo)
Support (hidden)
Support (hidden) (configurable to switched off)
Support 802.3af / 802.3at compliant power
supply
Local Power Supply
Support 5V DC
Built-in Antenna
Built-in low-radiation omnidirectional antenna
(Base gain 3.5dBi)
Max Total Power
<8W
Protection Rating
IP41
Standard: anti-theft screws and ordinary screws
Optional: lock and key
Color Plate Cover
Options
Standard: white
Optional: black, silver and gold
Operating
Temperature Range:
WPA (TKIP), WPA2 (AES), WPAPSK, and WEP
(64 or 128 bits)
Support
SMS authentication
Support
PEAP authentication
Support
Whitelist, static blacklist, and dynamic blacklist
User isolation
Support
Rouge AP detection
and counter measure
Support
Dynamic ACL
assignment
Support
RADIUS
Support
CPU Protection
Policy (CPP)
Support
Network Foundation
Protection Policy
(NFPP)
Support
WIDS (Wireless
Intrusion Detection
System)
Support
IPv4 Address
IPv6 transparent
transmission
–40°C to 70°C
Operating: 5% to 95% (non-condensing)
Storage: 5% to 95% (non-condensing)
MTBF
>250000H
Multicast
Maximum stations
per AP
Up to 32 ( Recommended up to 5 per RF)
Support
Remote Intelligent
Perception
Technology (RIPT)
Support
Intelligent
identification of
smart device
Sales Contact: sales@ransnet.com
Support
Multicast to unicast conversion
Support
Network Management
SNMP v1/v2C/v3, Telnet, SSH, TFTP, and FTP
and Web management
Graphical analysis of
wireless heat map
analysis
Support
Real-time spectrum
analysis
Support
Fault detection and
alarm
Support
Statistics and logs
Support
Autonomous/
Controller-based
Modes
Support
Yes
Configuration the
authentication
mode, encryption
mechanism, and
VLAN attributes for
each SSID
Support
Management and
Maintenance
Up to 64
SSID hiding
Static IP address or obtained by DHCP
Location-based
Service
Wireless Position
tracking
WLAN
Virtual AP
Support
Routing
0°C to 45°C
Storage Temperature
Range:
Humidity (noncondensing)
STA/SSID/AP-based rate limit
1 Micro USB port (hidden)
Reset
Dual Anti-theft
SSID-based
RF card-based
QR code
authentication
Data frame filtering
Management Port
PoE
Support
Security
Dimensions (WxDxH)
(mm)
LED indicators
mbox-MAP-130
www.ransnet.com
!2
Download PDF
Similar pages