QuickSpecs
HP 2920 Switch Series
Overview
Product overview
The HP 2920 Switch Series consists of four switches: the HP 2920-24G and 2920-24G-PoE+ Switches with 24
10/100/1000 ports, and the HP 2920-48G and 2920-48G-PoE+ Switches with 48 10/100/1000 ports. Each switch has four
dual-personality ports for 10/100/1000 or SFP connectivity.
In addition, the 2920 switch series supports up to four optional 10 Gigabit Ethernet (SFP+ and/or 10GBASE-T) ports, as
well as a two-port stacking module. These options provide you with flexible and easy-to-deploy uplinks and stacking.
Together with static and RIP routing, robust security and management, enterprise-class features, free lifetime warranty,
and free software updates, the 2920 switch series is a cost-effective, scalable solution for customers who are building
high-performance networks. These switches can be deployed at the enterprise edge, in remote branch offices, and in
converged networks.
Key Features
High-performance Gigabit Ethernet access switch
Four optional 10GbE (SFP+ and/or 10GBASE-T) ports
Stacking capability with a total of four switches
Layer 2 and Layer 3 plus static and RIP routing, PoE and PoE+ support
Lifetime warranty, sFlow, ACLs, OpenFlow, and rate limiting
Features and Benefits
Quality of Service (QoS)
Traffic prioritization (IEEE 802.1p)
allows real-time traffic classification into eight priority levels mapped to eight queues
Layer 4 prioritization
enables prioritization based on TCP/UDP port numbers
Class of Service (CoS)
sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port
number, source port, and DiffServ
Rate limiting
sets per-port ingress enforced maximums and per-port, per-queue minimums
Large buffers
provide graceful congestion management
Connectivity
Flexible 10 Gbps Ethernet connectivity
up to four optional 10-Gigabit ports (SFP+ and/or 10GBASE-T)
Two-port stacking module with up to 40 Gbps/port
optional two-port stacking module allows stacking of up to four switch units into a single virtual device
Auto-MDIX
automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
IPv6
IPv6 host
allows the switches to be managed and deployed at the edge of IPv6 networks
Dual stack (IPv4/IPv6)
provides transition mechanism from IPv4 to IPv6; supports connectivity for both protocols
MLD snooping
forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the
network
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 1
QuickSpecs
HP 2920 Switch Series
Overview
IEEE 802.3at Power over Ethernet (PoE+)
provide up to 30 W per port that allows support of the latest PoE+-capable devices such as IP phones, wireless
access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of
additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments
Pre-standard PoE support
detects and provides power to pre-standard PoE devices
Dual-personality functionality
includes four 10/100/1000 ports or SFP slots for optional fiber connectivity such as Gigabit-SX, -LX, and -LH, or 100FX
Performance
Energy-efficient design
High-efficiency power supplies
80 PLUS Silver Certified power supply increases power savings
Energy-efficient Ethernet (EEE) support
reduces power consumption in accordance with IEEE 802.3az
HP ProVision ASIC architecture
is designed with the latest HP ProVision ASIC, providing very low latency, increased packet buffering, and adaptive
power
consumption
Selectable queue configurations
allows for increased performance by selecting the number of queues and associated memory buffering that best
meet the requirements of the network applications
Software-defined networking
NEW OpenFlow
is a key technology that enables software-defined networking by allowing the separation of data (packet forwarding)
and control (routing decision) paths
Convergence
IP multicast snooping and data-driven IGMP
automatically prevent flooding of IP multicast traffic
LLDP-MED (Media Endpoint Discovery)
is a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure
network devices such as IP phones
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
is an automated device discovery protocol that provides easy mapping of network management applications
PoE and PoE+ allocations
support multiple methods (automatic, IEEE 802.3at dynamic, LLDP-MED fine grain, IEEE 802.3af device class, or
user specified) to allocate and manage PoE/PoE+ power for more efficient energy savings
Resiliency and high availability
IEEE 802.1s Multiple Spanning Tree
provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy
support for IEEE 802.1d and IEEE 802.1w
IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP port trunking
support up to 60 static, dynamic, or distributed trunks active across a stack, with each trunk having up to eight links
(ports) per static trunk; support trunking across stack members
Ring and chain stacking topology
allows failure of a link or switch in the ring of stacked switches, while the remaining connected switches continue
operation
Management
SNMPv1, v2, and v3
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 2
QuickSpecs
HP 2920 Switch Series
Overview
provide complete support of SNMP; provide full support of industry-standard Management Information Base (MIB)
plus private extensions; SNMPv3 supports increased security using encryption
Out-of-band Ethernet management port
enables management over a separate physical management network, keeping management traffic segmented from
network data traffic
Manageability
Dual flash images
provides independent primary and secondary operating system files for backup while upgrading
Friendly port names
allow assignment of descriptive names to ports
Find-Fix-Inform
finds and fixes common network problems automatically, then informs administrator
Multiple configuration files
allow multiple configuration files to be stored to a flash image
Software updates
free downloads from the Web
RMON, XRMON, and sFlow
provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Troubleshooting
ingress and egress port monitoring enable network problem solving
Uni-Directional Link Detection (UDLD)
monitors a link between two switches and blocks the ports on both ends of the link if the link goes down at any point
between the two devices.
Layer 2 switching
VLAN support and tagging
supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
GARP VLAN Registration Protocol
allows automatic learning and dynamic assignment of VLANs
Jumbo packet support
supports up to 9220-byte frame size to improve the performance of large data transfers
IEEE 802.1v protocol VLANs
isolate select non-IPv4 protocols automatically into their own VLANs
Rapid Per-VLAN Spanning Tree (RPVST+)
allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+
Layer 3 routing
Static IP routing
provides manually configured routing; includes ECMP capability
Routing Information Protocol (RIP)
provides RIPv1 and RIPv2 routing
256 static and 2,048 RIP routes
facilitate segregation of user data without adding external hardware
Security
Multiple user authentication methods
IEEE 802.1X
is an industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in
conjunction with a RADIUS server
Web-based authentication
is similar to IEEE 802.1X and provides a browser-based environment to authenticate clients that do not
support the IEEE 802.1X supplicant
MAC-based authentication
authenticates the client with the RADIUS server based on the client's MAC address
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 3
QuickSpecs
HP 2920 Switch Series
Overview
Authentication flexibility
Multiple IEEE 802.1X users per port
provides authentication of multiple IEEE 802.1X users per port; prevents a user from "piggybacking" on
another user's IEEE 802.1X authentication
Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port
switch port will accept up to 32 sessions of IEEE 802.1X, Web, and MAC authentications
Access control lists (ACLs)
provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination TCP/UDP port
number
Source-port filtering
allows only specified ports to communicate with each other
RADIUS/TACACS+
eases switch management security administration by using a password authentication server
IEEE 802.1X, MAC or Web authentication
provides concurrent network access control and Web authentication of up to 24 clients per port
Secure shell
encrypts all transmitted data for secure remote CLI access over IP networks
Secure Sockets Layer (SSL)
encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
Port security
allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout
prevents particular configured MAC addresses from connecting to the network
Secure FTP
allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying
of a switch configuration file
Switch management logon security
helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication
Custom banner
displays security policy when users log in to the switch
STP BPDU port protection
blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
DHCP protection
blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Dynamic ARP protection
blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
STP Root Guard
protects the root bridge from malicious attacks or configuration mistakes
Identity-driven ACL
enables implementation of a highly granular and flexible access security policy and VLAN assignment specific to
each authenticated network user
Per-port broadcast throttling
selectively configures broadcast control on heavy traffic port uplinks
Monitor and diagnostics
Digital optical monitoring of SFP+ and 1000BASE-T transceivers
allows detailed monitoring of the transceiver settings and parameters
Warranty and support
Lifetime warranty
for as long as you own the product with advance replacement and next-business-day delivery (available in most
countries)†
Electronic and telephone support
limited electronic and telephone support is available from HP; to reach our support centers, refer to
www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase,
refer to www.hp.com/networking/warrantysummary
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 4
QuickSpecs
HP 2920 Switch Series
Overview
Software releases
to find software for your product, refer to www.hp.com/networking/support; for details on the software releases
available with your product purchase, refer to www.hp.com/networking/warrantysummary
†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day
advance replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and
Services zl Modules, HP Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed
Steelhead, HP MSM765zl Mobility Controller and HP Survivable Branch Communication zl Module powered by Microsoft®
Lync has a five-year hardware warranty. For details, refer to the Software license and hardware warranty statements at
www.hp.com/networking/warranty.
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 5
QuickSpecs
HP 2920 Switch Series
Configuration
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or
Rack-Shippable solution.
HP 2920-24G Switch
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HP X331 165W 100-240VAC to 12VDC PS included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
220 NA
NEMA L6-20P Cord
HP 2920-24G-POE+ Switch
24 RJ-45 autosensing 10/100/1000 PoE+ ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HP X332 575W 100-240VAC to 54VDC PS included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
220 NA
NEMA L6-20P Cord
HP 2920-48G Switch
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HP X331 165W 100-240VAC to 12VDC PS included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
220 NA
NEMA L6-20P Cord
HP 2920-48G-POE+ Switch
48 RJ-45 autosensing 10/100/1000 PoE+ ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HP X332 575W 100-240VAC to 54VDC PS included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
220 NA
NEMA L6-20P Cord
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
J9726A
J9726A#B2B
J9726A#B2C
J9726A#B2E
J9727A
See
Configuration
Note:1, 2
J9727A#B2B
J9727A#B2C
J9727A#B2E
J9728A
See
Configuration
Note:1, 2
J9728A#B2B
J9728A#B2C
J9728A#B2E
J9729A
See
Configuration
Note:1, 2
J9729A#B2B
J9729A#B2C
J9729A#B2E
Page 6
QuickSpecs
HP 2920 Switch Series
Configuration
Configuration Rules
Note 1
Note 2
The following Transceivers install into this Module Switch :
HP X121 1G SFP LC LH Transceiver
HP X121 1G SFP LC LX Transceiver
HP X121 1G SFP LC SX Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
HP X121 1G SFP RJ45 T Transceiver
HP X111 100M SFP LC FX Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
Localization Or PDU cable required. (See Remarks Below)
J4860C
J4859C
J4858C
J9142B
J9143B
J8177C
J9054C
J9099B
J9100B
Rack Level Integration CTO Models
HP 2920-24G Switch
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports\
min=0 \ max=4 SFP Transceivers
1 - HP X331 165W 100-240VAC to 12VDC PS included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2920-24G-POE+ Switch
24 RJ-45 autosensing 10/100/1000 PoE+ ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HP X332 575W 100-240VAC to 54VDC PS included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2920-48G Switch
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HP X331 165W 100-240VAC to 12VDC PS included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
HP 2920-48G-POE+ Switch
48 RJ-45 autosensing 10/100/1000 PoE+ ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HP X332 575W 100-240VAC to 54VDC PS included
1U - Height
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
J9726A#0D1
See
Configuration
Note:1, 3, 4, 5
J9726A#B2B
J9726A#B2C
J9727A#0D1
See
Configuration
Note:1, 3, 4, 5
J9727A#B2B
J9727A#B2C
J9728A#0D1
See
Configuration
Note:1, 3, 4, 5
J9728A#B2B
J9728A#B2C
J9729A#0D1
See
Configuration
Note:1, 3, 4, 5
J9729A#B2B
J9729A#B2C
Page 7
QuickSpecs
HP 2920 Switch Series
Configuration
C15 to C14 Jumper Cord (ROW)
Configuration Rules
The following Transceivers install into this Module (Use #0D1 quoted to switch if switch is CTO) - if
applicable :
Note 1
HP X121 1G SFP LC LH Transceiver
J4860C
HP X121 1G SFP LC LX Transceiver
J4859C
HP X121 1G SFP LC SX Transceiver
J4858C
HP X122 1G SFP LC BX-D Transceiver
J9142B
HP X122 1G SFP LC BX-U Transceiver
J9143B
HP X121 1G SFP RJ45 T Transceiver
J8177C
HP X111 100M SFP LC FX Transceiver
J9054C
HP X112 100M SFP LC BX-D Transceiver
J9099B
HP X112 100M SFP LC BX-U Transceiver
J9100B
Note 3
If this switch is factory installed in HP Universal Racks, then the J9583A#0D1 is required.
CLIC Only - Allow the J9583AZ in all regions
Note 4
Localization required on orders without #B2B or #B2C options
Note 5
If HP CTO Switch Chassis is selected to be Rack Level Integration, Then the CTO Switch
Chassis needs to integrate (with #0D1) to the HP Universal Rack.
Remarks
Drop down under power supply should offer the following options and results:
Switch to PDU Power Cord - replace localized option with #B2B in AMS or #B2C in APJ and
EMEA.
Switch to Wall Power Cord - Should leave existing Localized Option (no #B2x options)
Internal Power Supplies
System (std 1 // max 2) User Selection (min 0 // max 1) per switch enclosure
HP X331 165W 100-240VAC to 12VDC PS
includes 1 x c15, 165w
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
C15 to C14 Jumper Cord (ROW)
220 NA
NEMA L6-20P Cord
HP X332 575W 100-240VAC to 54VDC PS
includes 1 x c15, 575w
J9739A#0D1
See
Configuration
Note:1, 3, 4
J9739A#B2B
J9739A#B2C
J9739A#B2E
J9738A#0D1
See
Configuration
Note:2, 3, 4
J9738A#B2B
C15 PDU NA
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
J9738A#B2C
C15 to C14 Jumper Cord (ROW)
220 NA
J9738A#B2E
NEMA L6-20P Cord
Configuration Rules
Note 1
This power supply is only supported on the J9726A and
J9728A.
Note 2
This power supply is only supported on the J9727A and J9729A.
Note 3
Localization required on orders without #B2B or #B2C options.
Note 4
If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for
switch . (Offered only in AMS, Taiwan, and Japan)
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 8
QuickSpecs
HP 2920 Switch Series
Configuration
Remarks
Localization
Drop down under power supply should offer the following options and results:
Switch to PDU Power Cord - replace localized option with #B2B in AMS or #B2C in APJ and
EMEA.
Switch to Wall Power Cord - Should leave existing Localized Option (no #B2x options)
High Volt Power Cord - Should replace Localized option with #B2E for power supply and with
#B2E for switch . (Offered only in AMS, Taiwan, and Japan)
X332 575W 100-240VAC to 54VDC PS, CL - Chile - English localization
Power Cord: Quantity :1, CEI 23-50, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6980
X332 575W 100-240VAC to 54VDC PS, US - U.S. - English localization
Power Cord: Quantity :1, NEMA 5-15P, C15 STRAIGHT, 125 V, 15 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-0973
X332 575 W 100-240VAC to 54VDC PS, EU - Europe - English localization
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6811
X332 575W 100-240VAC to 54VDC PS, AU - Australia - English localization
Power Cord: Quantity :1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 2.3
meters, 7.55 feet ,Part Store #: 8121-0834
X332 575W 100-240VAC to 54VDC PS, BR - Brazil - Portuguese localization
Power Cord: Quantity :1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1069
X332 575W 100-240VAC to 54VDC PS, KR - Korea - English localization
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6811
X332 575W 100-240VAC to 54VDC PS, UK - United Kingdom - English
localization
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6809
X332 575W 100-240VAC to 54VDC PS, SZ - Switzerland - English localization
Power Cord: Quantity :1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A,
2.25 meters, 7.39 feet ,Part Store #: 8120-6815
X332 575W 100-240VAC to 54VDC PS, DK - Denmark - English localization
Power Cord: Quantity :1, DK 2-5A, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6814
X332 575W 100-240VAC to 54VDC PS, JP - Japan - English localization
Power Cord: Quantity :1, JIS C 8303, C13 STRAIGHT, 125 V, 12 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-4753
X332 575W 100-240VAC to 54VDC PS, IN - India - English localization
Power Cord: Quantity :1, IS 1293, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8121-0780
X332 575W 100-240VAC to 54VDC PS, ZA - South Africa - English localization
Power Cord: Quantity :1, SABS 164, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6813
X332 575W 100-240VAC to 54VDC PS, IL - Israel - English localization
Power Cord: Quantity :1, SI 32 90-DEG, C13 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1035
X332 575W 100-240VAC to 54VDC PS, TH - Thailand - English localization
X332 575W 100-240VAC to 54VDC PS, CN - China - English localization
Power Cord: Quantity :1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-8707
X332 575W 100-240VAC to 54VDC PS, TW - Taiwan - English localization
Power Cord: Quantity :1, CNS 690 Type 2(1), C13 STRAIGHT, 125 V, 13 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-0974
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
J9738A#A1X
J9738A#ABA
J9738A#ABB
J9738A#ABG
J9738A#AC4
J9738A#AC6
J9738A#ACC
J9738A#ACD
J9738A#ACE
J9738A#ACF
J9738A#ACJ
J9738A#ACQ
J9738A#AKJ
J9738A#AKL
J9738A#AKM
J9738A#ARB
Page 9
QuickSpecs
HP 2920 Switch Series
Configuration
X332 575W 100-240VAC to 54VDC PS, MY - Malaysia - English localization
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6809
X332 575W 100-240VAC to 54VDC PS, AR - Argentina - English localization
Power Cord: Quantity :1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6869
X331 165W 100-240VAC to 12VDC PS, CL - Chile - English localization
Power Cord: Quantity :1, CEI 23-50, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6980
X331 165W 100-240VAC to 12VDC PS, US - U.S. - English localization
Power Cord: Quantity :1, NEMA 5-15P, C15 STRAIGHT, 125 V, 15 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-0973
X331 165W 100-240VAC to 12VDC PS, EU - Europe - English localization
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6811
X331 165W 100-240VAC to 12VDC PS, AU - Australia - English localization
Power Cord: Quantity :1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 2.3
meters, 7.55 feet ,Part Store #: 8121-0834
X331 165W 100-240VAC to 12VDC PS, BR - Brazil - Portuguese localization
Power Cord: Quantity :1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1069
X331 165W 100-240VAC to 12VDC PS, KR - Korea - English localization
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6811
X331 165W 100-240VAC to 12VDC PS, UK - United Kingdom - English
localization
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6809
X331 165W 100-240VAC to 12VDC PS, SZ - Switzerland - English localization
Power Cord: Quantity :1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A,
2.25 meters, 7.39 feet ,Part Store #: 8120-6815
X331 165W 100-240VAC to 12VDC PS, DK - Denmark - English localization
Power Cord: Quantity :1, DK 2-5A, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6814
X331 165W 100-240VAC to 12VDC PS, JP - Japan - English localization
Power Cord: Quantity :1, JIS C 8303, C13 STRAIGHT, 125 V, 12 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-4753
X331 165W 100-240VAC to 12VDC PS, IN - India - English localization
Power Cord: Quantity :1, IS 1293, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8121-0780
X331 165W 100-240VAC to 12VDC PS, ZA - South Africa - English localization
Power Cord: Quantity :1, SABS 164, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6813
X331 165W 100-240VAC to 12VDC PS, IL - Israel - English localization
Power Cord: Quantity :1, SI 32 90-DEG, C13 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1035
X331 165W 100-240VAC to 12VDC PS, TH - Thailand - English localization
Power Cord: Quantity :1, NEMA 5-15P, C13 STRAIGHT, 250 V, 10 A, 2.3
meters, 7.55 feet ,Part Store #: 8121-0668
X331 165W 100-240VAC to 12VDC PS, CN - China - English localization
Power Cord: Quantity :1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-8707
X331 165W 100-240VAC to 12VDC PS, TW - Taiwan - English localization
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
J9738A#ARE
J9738A#ARM
J9739A#A1X
J9739A#ABA
J9739A#ABB
J9739A#ABG
J9739A#AC4
J9739A#AC6
J9739A#ACC
J9739A#ACD
J9739A#ACE
J9739A#ACF
J9739A#ACJ
J9739A#ACQ
J9739A#AKJ
J9739A#AKL
J9739A#AKM
J9739A#ARB
Page 10
QuickSpecs
HP 2920 Switch Series
Configuration
Power Cord: Quantity :1, CNS 690 Type 2(1), C13 STRAIGHT, 125 V, 13 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-0974
X331 165W 100-240VAC to 12VDC PS, MY - Malaysia - English localization
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6809
X331 165W 100-240VAC to 12VDC PS, AR - Argentina - English localization
Power Cord: Quantity :1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6869
2920-24G Switch, CL - Chile - English localization
Power Cord: Quantity :1, CEI 23-50, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6980
2920-24G Switch, US - U.S. - English localization
Power Cord: Quantity :1, NEMA 5-15P, C15 STRAIGHT, 125 V, 15 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-0914
2920-24G Switch, EU - Europe - English localization
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6811
2920-24G Switch, AU - Australia - English localization
Power Cord: Quantity :1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 2.3
meters, 7.55 feet ,Part Store #: 8121-0834
2920-24G Switch, BR - Brazil - Portuguese localization
Power Cord: Quantity :1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1069
2920-24G Switch, KR - Korea - English localization
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6811
2920-24G Switch, UK - United Kingdom - English localization
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6809
2920-24G Switch, SZ - Switzerland - English localization
Power Cord: Quantity :1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A,
2.25 meters, 7.39 feet ,Part Store #: 8120-6815
2920-24G Switch, DK - Denmark - English localization
Power Cord: Quantity :1, DK 2-5A, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6814
2920-24G Switch, JP - Japan - English localization
Power Cord: Quantity :1, JIS C 8303, C13 STRAIGHT, 125 V, 12 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-4753
2920-24G Switch, IN - India - English localization
Power Cord: Quantity :1, IS 1293, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8121-0780
2920-24G Switch, ZA - South Africa - English localization
Power Cord: Quantity :1, SABS 164, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6813
2920-24G Switch, IL - Israel - English localization
Power Cord: Quantity :1, SI 32 90-DEG, C13 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1035
2920-24G Switch, TH - Thailand - English localization
Power Cord: Quantity :1, NEMA 5-15P, C13 STRAIGHT, 250 V, 10 A, 2.3
meters, 7.55 feet ,Part Store #: 8121-0668
2920-24G Switch, CN - China - English localization
Power Cord: Quantity :1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-8707
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
J9739A#ARE
J9739A#ARM
J9726A#A1X
J9726A#ABA
J9726A#ABB
J9726A#ABG
J9726A#AC4
J9726A#AC6
J9726A#ACC
J9726A#ACD
J9726A#ACE
J9726A#ACF
J9726A#ACJ
J9726A#ACQ
J9726A#AKJ
J9726A#AKL
J9726A#AKM
Page 11
QuickSpecs
HP 2920 Switch Series
Configuration
2920-24G Switch, TW - Taiwan - English localization
Power Cord: Quantity :1, CNS 690 Type 2(1), C13 STRAIGHT, 125 V, 13 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-0974
2920-24G Switch, MY - Malaysia - English localization
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6809
2920-24G Switch, AR - Argentina - English localization
Power Cord: Quantity :1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6869
2920-24G Switch, JmpCbl-NA/JP/TW - JmpCbl-NA/JP/TW
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1091
2920-24G Switch, JmpCbl-ROW - JmpCbl-ROW
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1094
2920-24G Switch, 220V-NA - L6-20 220V-NA
Power Cord: Quantity :1, NEMA 6-15P, C13 STRAIGHT, 250 V, 10 A, 2.3
meters, 7.55 feet ,Part Store #: 8120-3996
2920-24G-POE+ Switch, CL - Chile - English localization
Power Cord: Quantity :1, CEI 23-50, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6980
2920-24G-POE+ Switch, US - U.S. - English localization
Power Cord: Quantity :1, NEMA 5-15P, C15 STRAIGHT, 125 V, 15 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-0914
2920-24G-POE+ Switch, EU - Europe - English localization
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6811
2920-24G-POE+ Switch, AU - Australia - English localization
Power Cord: Quantity :1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 2.3
meters, 7.55 feet ,Part Store #: 8121-0834
2920-24G-POE+ Switch, BR - Brazil - Portuguese localization
Power Cord: Quantity :1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1069
2920-24G-POE+ Switch, KR - Korea - English localization
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6811
2920-24G-POE+ Switch, UK - United Kingdom - English localization
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6809
2920-24G-POE+ Switch, SZ - Switzerland - English localization
Power Cord: Quantity :1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A,
2.25 meters, 7.39 feet ,Part Store #: 8120-6815
2920-24G-POE+ Switch, DK - Denmark - English localization
Power Cord: Quantity :1, DK 2-5A, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6814
2920-24G-POE+ Switch, JP - Japan - English localization
Power Cord: Quantity :1, JIS C 8303, C13 STRAIGHT, 125 V, 12 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-4753
2920-24G-POE+ Switch, IN - India - English localization
Power Cord: Quantity :1, IS 1293, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8121-0780
Power Cord: Quantity :1, SABS 164, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6813
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
J9726A#ARB
J9726A#ARE
J9726A#ARM
J9726A#B2B
J9726A#B2C
J9726A#B2E
J9727A#A1X
J9727A#ABA
J9727A#ABB
J9727A#ABG
J9727A#AC4
J9727A#AC6
J9727A#ACC
J9727A#ACD
J9727A#ACE
J9727A#ACF
J9727A#ACJ
J9727A#ACQ
Page 12
QuickSpecs
HP 2920 Switch Series
Configuration
2920-24G-POE+ Switch, IL - Israel - English localization
Power Cord: Quantity :1, SI 32 90-DEG, C13 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1035
2920-24G-POE+ Switch, TH - Thailand - English localization
Power Cord: Quantity :1, NEMA 5-15P, C13 STRAIGHT, 250 V, 10 A, 2.3
meters, 7.55 feet ,Part Store #: 8121-0668
2920-24G-POE+ Switch, CN - China - English localization
Power Cord: Quantity :1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-8707
2920-24G-POE+ Switch, TW - Taiwan - English localization
Power Cord: Quantity :1, CNS 690 Type 2(1), C13 STRAIGHT, 125 V, 13 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-0974
2920-24G-POE+ Switch, MY - Malaysia - English localization
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6809
2920-24G-POE+ Switch, AR - Argentina - English localization
Power Cord: Quantity :1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6869
2920-24G-POE+ Switch, JmpCbl-NA/JP/TW - JmpCbl-NA/JP/TW
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1091
2920-24G-POE+ Switch, JmpCbl-ROW - JmpCbl-ROW
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1094
2920-24G-POE+ Switch, 220V-NA - L6-20 220V-NA
Power Cord: Quantity :1, NEMA 6-15P, C15 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8120-5338
2920-48G Switch, CL - Chile - English localization
Power Cord: Quantity :1, CEI 23-50, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6980
2920-48G Switch, US - U.S. - English localization
Power Cord: Quantity :1, NEMA 5-15P, C15 STRAIGHT, 125 V, 15 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-0914
2920-48G Switch, EU - Europe - English localization
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6811
2920-48G Switch, AU - Australia - English localization
Power Cord: Quantity :1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 2.3
meters, 7.55 feet ,Part Store #: 8121-0834
2920-48G Switch, BR - Brazil - Portuguese localization
Power Cord: Quantity :1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1069
2920-48G Switch, KR - Korea - English localization
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6811
2920-48G Switch, UK - United Kingdom - English localization
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6809
2920-48G Switch, SZ - Switzerland - English localization
Power Cord: Quantity :1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A,
2.25 meters, 7.39 feet ,Part Store #: 8120-6815
2920-48G Switch, DK - Denmark - English localization
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
J9727A#AKJ
J9727A#AKL
J9727A#AKM
J9727A#ARB
J9727A#ARE
J9727A#ARM
J9727A#B2B
J9727A#B2C
J9727A#B2E
J9728A#A1X
J9728A#ABA
J9728A#ABB
J9728A#ABG
J9728A#AC4
J9728A#AC6
J9728A#ACC
J9728A#ACD
J9728A#ACE
Page 13
QuickSpecs
HP 2920 Switch Series
Configuration
Power Cord: Quantity :1, DK 2-5A, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6814
2920-48G Switch, JP - Japan - English localization
Power Cord: Quantity :1, JIS C 8303, C13 STRAIGHT, 125 V, 12 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-4753
2920-48G Switch, IN - India - English localization
Power Cord: Quantity :1, IS 1293, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8121-0780
2920-48G Switch, ZA - South Africa - English localization
Power Cord: Quantity :1, SABS 164, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6813
2920-48G Switch, IL - Israel - English localization
Power Cord: Quantity :1, SI 32 90-DEG, C13 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1035
2920-48G Switch, TH - Thailand - English localization
Power Cord: Quantity :1, NEMA 5-15P, C13 STRAIGHT, 250 V, 10 A, 2.3
meters, 7.55 feet ,Part Store #: 8121-0668
2920-48G Switch, CN - China - English localization
Power Cord: Quantity :1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-8707
2920-48G Switch, TW - Taiwan - English localization
Power Cord: Quantity :1, CNS 690 Type 2(1), C13 STRAIGHT, 125 V, 13 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-0974
2920-48G Switch, MY - Malaysia - English localization
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6809
2920-48G Switch, AR - Argentina - English localization
Power Cord: Quantity :1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6869
2920-48G Switch, JmpCbl-NA/JP/TW - JmpCbl-NA/JP/TW
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1091
2920-48G Switch, JmpCbl-ROW - JmpCbl-ROW
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1094
2920-48G Switch, 220V-NA - L6-20 220V-NA
Power Cord: Quantity :1, NEMA 6-15P, C13 STRAIGHT, 250 V, 10 A, 2.3
meters, 7.55 feet ,Part Store #: 8120-3996
2920-48G-POE+ Switch, CL - Chile - English localization
Power Cord: Quantity :1, CEI 23-50, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6980
2920-48G-POE+ Switch, US - U.S. - English localization
Power Cord: Quantity :1, NEMA 5-15P, C15 STRAIGHT, 125 V, 15 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-0914
2920-48G-POE+ Switch, EU - Europe - English localization
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6811
2920-48G-POE+ Switch, AU - Australia - English localization
Power Cord: Quantity :1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 2.3
meters, 7.55 feet ,Part Store #: 8121-0834
2920-48G-POE+ Switch, BR - Brazil - Portuguese localization
Power Cord: Quantity :1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1069
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
J9728A#ACF
J9728A#ACJ
J9728A#ACQ
J9728A#AKJ
J9728A#AKL
J9728A#AKM
J9728A#ARB
J9728A#ARE
J9728A#ARM
J9728A#B2B
J9728A#B2C
J9728A#B2E
J9729A#A1X
J9729A#ABA
J9729A#ABB
J9729A#ABG
J9729A#AC4
Page 14
QuickSpecs
HP 2920 Switch Series
Configuration
2920-48G-POE+ Switch, KR - Korea - English localization
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6811
2920-48G-POE+ Switch, UK - United Kingdom - English localization
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6809
2920-48G-POE+ Switch, SZ - Switzerland - English localization
Power Cord: Quantity :1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A,
2.25 meters, 7.39 feet ,Part Store #: 8120-6815
2920-48G-POE+ Switch, DK - Denmark - English localization
Power Cord: Quantity :1, DK 2-5A, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6814
2920-48G-POE+ Switch, JP - Japan - English localization
Power Cord: Quantity :1, JIS C 8303, C13 STRAIGHT, 125 V, 12 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-4753
2920-48G-POE+ Switch, IN - India - English localization
Power Cord: Quantity :1, IS 1293, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8121-0780
2920-48G-POE+ Switch, ZA - South Africa - English localization
Power Cord: Quantity :1, SABS 164, C13 STRAIGHT, 250 V, 10 A, 2.25 meters,
7.39 feet ,Part Store #: 8120-6813
2920-48G-POE+ Switch, IL - Israel - English localization
Power Cord: Quantity :1, SI 32 90-DEG, C13 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1035
2920-48G-POE+ Switch, TH - Thailand - English localization
Power Cord: Quantity :1, NEMA 5-15P, C13 STRAIGHT, 250 V, 10 A, 2.3
meters, 7.55 feet ,Part Store #: 8121-0668
2920-48G-POE+ Switch, CN - China - English localization
Power Cord: Quantity :1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-8707
2920-48G-POE+ Switch, TW - Taiwan - English localization
Power Cord: Quantity :1, CNS 690 Type 2(1), C13 STRAIGHT, 125 V, 13 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-0974
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6809
2920-48G-POE+ Switch, AR - Argentina - English localization
Power Cord: Quantity :1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 2.3 meters,
7.55 feet ,Part Store #: 8120-6869
2920-48G-POE+ Switch, JmpCbl-NA/JP/TW - JmpCbl-NA/JP/TW
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1091
2920-48G-POE+ Switch, JmpCbl-ROW - JmpCbl-ROW
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8121-1094
2920-48G-POE+ Switch, 220V-NA - L6-20 220V-NA
Power Cord: Quantity :1, NEMA 6-15P, C15 STRAIGHT, 250 V, 10 A, 2.5
meters, 8.21 feet ,Part Store #: 8120-5338
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Networking
Ethernet
HP 2920 2-port 10GbE SFP+ Module
Modules
min=0 \ max=2 SFP + Transceivers
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
J9729A#AC6
J9729A#ACC
J9729A#ACD
J9729A#ACE
J9729A#ACF
J9729A#ACJ
J9729A#ACQ
J9729A#AKJ
J9729A#AKL
J9729A#AKM
J9729A#ARB
J9729A#ARE
J9729A#ARM
J9729A#B2B
J9729A#B2C
J9729A#B2E
J9731A
See
Configuration
Note:1
Page 15
QuickSpecs
HP 2920 Switch Series
Configuration
HP 2920 2-port 10GBASE-T Module
J9732A
Configuration Rules
Note 1
HP X121 1G SFP LC LH Transceiver
HP X121 1G SFP LC LX Transceiver
HP X121 1G SFP LC SX Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
HP X132 10G SFP+ LC SR Transceiver
HP X132 10G SFP+ LC ER Transceiver
HP X132 10G SFP+ LC LR Transceiver
HP X132 10G SFP+ LC LRM Transceiver
HP X242 SFP+ SFP+ 1m Direct Attach Cable
HP X242 SFP+ SFP+ 3m Direct Attach Cable
HP X242 SFP+ SFP+ 7m Direct Attach Cable
HP X244 XFP SFP+ 1m Direct Attach Cable
HP X244 XFP SFP+ 3m Direct Attach Cable
HP X244 XFP SFP+ 5m Direct Attach Cable
HP X242 10G SFP+ 10m DAC Cable
HP X242 10G SFP+ 15m DAC Cable
J4860C
J4859C
J4858C
J9142B
J9143B
J9150A
J9153A
J9151A
J9152A
J9281B
J9283B
J9285B
J9300A
J9301A
J9302A
J9286B
J9287B
System (std 0 // max 1) User Selection (min 0 // max 1) per
enclosure
HP 2920 2-port Stacking Module
J9733A
SFP
Transceivers
HP X121 1G SFP LC LH Transceiver
HP X121 1G SFP LC LX Transceiver
HP X121 1G SFP LC SX Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
HP X121 1G SFP RJ45 T Transceiver
HP X111 100M SFP LC FX Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
J4860C
J4859C
J4858C
J9142B
J9143B
J8177C
J9054C
J9099B
J9100B
SFP+
Transceivers
HP X132 10G SFP+ LC ER Transceiver
HP X132 10G SFP+ LC SR Transceiver
HP X132 10G SFP+ LC LR Transceiver
HP X132 10G SFP+ LC LRM Transceiver
HP X242 10G SFP+ SFP+ 1m DAC Cable
HP X242 10G SFP+ SFP+ 3m DAC Cable
HP X242 10G SFP+ SFP+ 7m DAC Cable
HP X244 10G XFP SFP+ 1m DAC Cable
HP X244 10G XFP SFP+ 3m DAC Cable
HP X244 10G XFP SFP+ 5m DAC Cable
HP X242 10G SFP+ 10m DAC Cable
HP X242 10G SFP+ 15m DAC Cable
J9153A
J9150A
J9151A
J9152A
J9281B
J9283B
J9285B
J9300A
J9301A
J9302A
J9286B
J9287B
Multi-Mode
Cables
HP .5m Multi-mode OM3 LC/LC FC Cable
AJ833A
HP 1m Multi-mode OM3 LC/LC FC Cable
HP 2 m Multimode OM3 LC/LC FC Cable
AJ834A
AJ835A
Stacking
Modules
Transceivers
Cables
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 16
QuickSpecs
HP 2920 Switch Series
Configuration
Stacking
Cables
Switch Enclosure Options
HP 5 m Multimode OM3 LC/LC FC Cable
HP 15 m Multimode OM3 LC/LC FC Cable
HP 30 m Multimode OM3 LC/LC FC Cable
HP 50 m Multimode OM3 LC/LC FC Cable
HP 2920 0.5m Stacking Cable
AJ836A
AJ837A
AJ838A
AJ839A
J9734A
HP 2920 1.0m Stacking Cable
HP 2920 3.0m Stacking Cable
J9735A
J9736A
HP X410 1U Univ 4-post Rack Mnt Kit
J9583A
See
Configuration
Note:1 & 2
Note
1. If this Mounting Kit is order with #0D1 or Z then
it integrates to the HP Universal Rack. (not the
switch)
2. If the J9583A is ordered in EMEA fire the
following UNBUILDABLE error:
"The J9583A cannot be ordered with option
integrated to the Rack in the EMEA region. The
Rack Mount kit must be ordered as BTO using
supplier 8OCZ."
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 17
QuickSpecs
HP 2920 Switch Series
Technical Specifications
HP 2920-24G Switch (J9726A)
Ports
20 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
2 module slots
1 stacking module slot
1 dual-personality (RJ-45 or USB micro-B)
1 USB 1.1
1 RJ-45 out-of-band management port
Power supplies
1 power supply slot
1 minimum power supply required
includes: 1 x J9739A (HP X331 165W 100-240VAC to 12VDC Modular Power Supply)
Physical
Dimensions
17.42(w) x 13.23(d) x 1.75(h) in (44.25 x 33.6 x 4.45 cm) (1U height)
characteristics
Weight
11.57 lb (5.25 kg)
Memory and processor Tri Core ARM1176 @ 625 MHz, 512 MB SDRAM, 1 GB flash MB; packet buffer size: 11.25 MB
(6.75 MB dynamic egress + 4.5 MB ingress)
Performance
100 Mb Latency
< 9.0 µs (FIFO 64-byte packets)
1000 Mb Latency
< 3.3 µs (FIFO 64-byte packets)
10 Gbps Latency
< 3.3 µs (FIFO 64-byte packets)
Throughput
95.2 million pps
Switching capacity
128 Gbps
Routing table size
2048 entries (IPv4), 256 entries (IPv6)
MAC address table size 16000 entries
Environment
Operating temperature 32°F to 131°F (0°C to 55°C)
Operating relative
15% to 95%, noncondensing
humidity
Non-operating/
-40°F to 158°F (-40°C to 70°C)
Storage temperature
Non-operating/
15% to 95%, noncondensing
Storage relative
humidity
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 57 dB, Pressure: 41.4 dB
Electrical
Frequency
50/60 Hz
characteristics
80plus.org Certification Silver
Maximum heat
198 BTU/hr (208.89 kJ/hr)
dissipation
Voltage
100-240 VAC
Maximum power rating58 W
Idle power
26 W
Notes
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 18
QuickSpecs
HP 2920 Switch Series
Technical Specifications
Safety
Emissions
Immunity
Management
Services
CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU
RoHS Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A;
IEC 60950-1 :Second Edition ; IEC 60825-1; EN62479:2010; CSA C22.2 No. 60950-1-07 2nd
Edition; EN 60950-1:2006+A11:2009+A1:2010+A12:2011; IEC 60950-1 (ed.2): am1
FCC part 15 Class A; VCCI Class A; EN 55022/CISPR 22 Class A
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
HP PCM+; IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; out-of-band management (RJ-45 Ethernet); SNMP Manager; Telnet; RMON1;
FTP; in-line and out-of-band; out-of-band management (serial RS-232C or Micro USB)
Refer to the HP website at www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 2920-24G-PoE+ Switch (J9727A)
Ports
20 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
4 RJ-45 dual-personality 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
2 module slots
1 stacking module slot
1 dual-personality (RJ-45 or USB micro-B)
1 USB 1.1
1 RJ-45 out-of-band management port
Power supplies
1 power supply slot
1 minimum power supply required
includes: 1 x J9738A (HP X332 575W 100-240VAC to 54VDC Modular Power Supply)
Physical
Dimensions
17.42(w) x 13.23(d) x 1.75(h) in (44.25 x 33.6 x 4.45 cm) (1U height)
characteristics
Weight
12.04 lb (5.46 kg)
Memory and processor Tri Core ARM1176 @ 625 MHz, 512 MB SDRAM, 1 GB flash; packet buffer size: 11.25 MB (6.5
MB dynamic egress + 4.5 MB ingress)
Performance
100 Mb Latency
< 9.0 µs (FIFO 64-byte packets)
1000 Mb Latency
< 3.3 µs (FIFO 64-byte packets)
10 Gbps Latency
< 3.3 µs (FIFO 64-byte packets)
Throughput
95.2 million pps
Switching capacity
128 Gbps
Routing table size
2048 entries (IPv4), 256 entries (IPv6)
MAC address table size 16000 entries
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 19
QuickSpecs
HP 2920 Switch Series
Technical Specifications
Environment
Electrical
characteristics
Operating temperature 32°F to 131°F (0°C to 55°C)
Operating relative
15% to 95%, noncondensing
humidity
Non-operating/
-40°F to 158°F (-40°C to 70°C)
Storage temperature
Non-operating/
15% to 95%, noncondensing
Storage relative
humidity
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 61 dB, Pressure: 44.9 dB
Frequency
50/60 Hz
80plus.org Certification Silver
Maximum heat
358 BTU/hr (377.69 kJ/hr)
dissipation
Voltage
100-240 VAC
Maximum power rating475 W
Idle power
42 W
PoE power
Notes
Safety
Emissions
Immunity
Management
370 W
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is
dependent on the type and quantity of power supplies and may be
supplemented with the use of an external power supply (EPS).
370 W of PoE+ power is available using the internal default power
supply.
CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU
RoHS Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A;
IEC 60950-1 :Second Edition ; IEC 60825-1; EN62479:2010; CSA C22.2 No. 60950-1-07 2nd
Edition; EN 60950-1:2006+A11:2009+A1:2010+A12:2011; IEC 60950-1 (ed.2): am1
FCC part 15 Class A; VCCI Class A; EN 55022/CISPR 22 Class A
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
HP PCM+; IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; out-of-band management (RJ-45 Ethernet); SNMP Manager; Telnet; RMON1;
FTP; in-line and out-of-band; out-of-band management (serial RS-232C or Micro USB)
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 20
QuickSpecs
HP 2920 Switch Series
Technical Specifications
Services
Refer to the HP website at www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 2920-48G Switch (J9728A)
Ports
44 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
2 module slots
1 stacking module slot
1 dual-personality (RJ-45 or USB micro-B)
1 USB 1.1
1 RJ-45 out-of-band management port
Power supplies
1 power supply slot
1 minimum power supply required
includes: 1 x J9739A (HP X331 165W 100-240VAC to 12VDC Modular Power Supply)
Physical
characteristics
Dimensions
17.42(w) x 13.23(d) x 1.75(h) in (44.25 x 33.6 x 4.45 cm) (1U height)
Weight
11.95 lb (5.42 kg)
Memory and processor Tri Core ARM1176 @ 625 MHz, 512 MB SDRAM, 1 GB flash; packet buffer size: 11.25 MB (6.75
MB dynamic egress + 4.5 MB ingress)
Performance
100 Mb Latency
< 9.0 µs (FIFO 64-byte packets)
1000 Mb Latency
< 3.3 µs (FIFO 64-byte packets)
10 Gbps Latency
< 3.2 µs (FIFO 64-byte packets)
Throughput
130.9 million pps
Switching capacity
176 Gbps
Routing table size
2048 entries (IPv4), 256 entries (IPv6)
MAC address table size 16000 entries
Environment
Operating temperature 32°F to 131°F (0°C to 55°C)
Operating relative
15% to 95%, noncondensing
humidity
Non-operating/
-40°F to 158°F (-40°C to 70°C)
Storage temperature
Non-operating/
15% to 95%, noncondensing
Storage relative
humidity
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 57 dB, Pressure: 41.8 dB
Electrical
Frequency
50/60 Hz
characteristics
80plus.org Certification Silver
Maximum heat
239 BTU/hr (252.15 kJ/hr)
dissipation
Voltage
100-240 VAC
Maximum power rating70 W
Idle power
27 W
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 21
QuickSpecs
HP 2920 Switch Series
Technical Specifications
Notes
Safety
Emissions
Immunity
Management
Services
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU
RoHS Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A;
IEC 60825-1; IEC 60950-1, Second Edition; EN62479:2010; CSA C22.2 No. 60950-1-07 2nd
Edition; EN 60950-1:2006+A11:2009+A1:2010+A12:2011; IEC 60950-1 (ed.2): am1
FCC part 15 Class A; VCCI Class A; EN 55022/CISPR 22 Class A
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
HP PCM+; IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; out-of-band management (RJ-45 Ethernet); SNMP Manager; Telnet; RMON1;
FTP; in-line and out-of-band; out-of-band management (serial RS-232C or Micro USB)
Refer to the HP website at www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 2920-48G-PoE+ Switch (J9729A)
Ports
44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
4 RJ-45 dual-personality 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
2 module slots
1 stacking module slot
1 dual-personality (RJ-45 or USB micro-B)
1 USB 1.1
1 RJ-45 out-of-band management port
Power supplies
1 power supply slot
1 minimum power supply required
includes: 1 x J9738A (HP X332 575W 100-240VAC to 54VDC Modular Power Supply)
Physical
Dimensions
17.42(w) x 13.23(d) x 1.73(h) in (44.25 x 33.6 x 4.39 cm) (1U height)
characteristics
Weight
12.57 lb (5.7 kg)
Memory and processor Tri Core ARM1176 @ 625 MHz, 512 MB SDRAM, 1 GB flash; packet buffer size: 11.25 MB (6.75
MB dynamic egress + 4.5 MB ingress)
Performance
100 Mb Latency
< 9.0 µs (FIFO 64-byte packets)
1000 Mb Latency
< 3.2 µs (FIFO 64-byte packets)
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 22
QuickSpecs
HP 2920 Switch Series
Technical Specifications
Environment
Electrical
characteristics
Safety
Emissions
Immunity
10 Gbps Latency
< 3.2 µs (FIFO 64-byte packets)
Throughput
130.9 million pps
Switching capacity
176 Gbps
Routing table size
2048 entries (IPv4), 256 entries (IPv6)
MAC address table size 16000 entries
Operating temperature 32°F to 131°F (0°C to 55°C)
Operating relative
15% to 95%, noncondensing
humidity
Non-operating/
-40°F to 158°F (-40°C to 70°C)
Storage temperature
Non-operating/
15% to 95%, noncondensing
Storage relative
humidity
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 62 dB, Pressure: 45.2 dB
Frequency
50/60 Hz
80plus.org Certification Silver
Maximum heat
399 BTU/hr (420.95 kJ/hr)
dissipation
Voltage
100-240 VAC
Maximum power rating487 W
Idle power
46 W
PoE power
370 W
Notes
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is
dependent on the type and quantity of power supplies and may be
supplemented with the use of an external power supply (EPS).
370 W of PoE+ power is available using the internal default power
supply.
CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU
RoHS Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A;
IEC 60825-1; IEC 60950-1, Second Edition; EN62479:2010; CSA C22.2 No. 60950-1-07 2nd
Edition; EN 60950-1:2006+A11:2009+A1:2010+A12:2011; IEC 60950-1 (ed.2): am1
FCC part 15 Class A; VCCI Class A; EN 55022/CISPR 22 Class A
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 23
QuickSpecs
HP 2920 Switch Series
Technical Specifications
Management
Services
Flicker
IEC 61000-3-3
HP PCM+; IMC - Intelligent Management Center; command-line interface; Web browser;
configuration menu; out-of-band management (RJ-45 Ethernet); SNMP Manager; Telnet; RMON1;
FTP; in-line and out-of-band; out-of-band management (serial RS-232C or Micro USB)
Refer to the HP website at www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
Standards and
Denial of service protection
protocols
CPU DoS Protection
(applies to all products in
Device management
series)
RFC 1155 Structure and Mgmt Information (SMIv1)
RFC 1157 SNMPv1/v2c
RFC 1591 DNS (client)
RFC 1901 (Community based SNMPv2)
RFC 1901-1907 SNMPv2c, SMIv2 and Revised MIB-II
RFC 1908 (SNMP v1/2 Coexistence)
RFC 2578-2580 SMIv2
RFC 2579 (SMIv2 Text Conventions)
RFC 2580 (SMIv2 Conformance)
RFC 2819 (RMON groups Alarm, Event, History and
Statistics only)
RFC 3416 (SNMP Protocol Operations v2)
RFC 3417 (SNMP Transport Mappings)
HTML and telnet management
HTTP, SSHv1, and Telnet
Multiple Configuration Files
Multiple Software Images
SNMP v3 and RMON RFC support
SSHv1/SSHv2 Secure Shell
TACACS/TACACS+
Web UI
General protocols
IEEE 802.1AX-2008 Link Aggregation
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and Port
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3af Power over Ethernet
IEEE 802.3at PoE+
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 868 Time Protocol
RFC 951 BOOTP
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 24
QuickSpecs
HP 2920 Switch Series
Technical Specifications
RFC 1058 RIPv1
RFC 1256 ICMP Router Discovery Protocol (IRDP)
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1542 BOOTP Extensions
RFC 2030 Simple Network Time Protocol (SNTP) v4
RFC 2131 DHCP
RFC 2236 IGMP Snooping
RFC 2453 RIPv2
RFC 2865 Remote Authentication Dial In User Service (RADIUS)
RFC 2866 RADIUS Accounting
RFC 3046 DHCP Relay Agent Information Option
RFC 3411 An Architecture for Describing Simple Network Management Protocol (SNMP)
Management Frameworks
RFC 3412 Message Processing and Dispatching for the Simple Network Management Protocol
(SNMP)
RFC 3413 Simple Network Management Protocol (SNMP) Applications
RFC 3414 User-based Security Model (USM) for version 3
of the Simple Network Management Protocol (SNMPv3)
RFC 3415 View-based Access Control Model (VACM) for
the Simple Network Management Protocol (SNMP)
RFC 3416 Protocol Operations for SNMP
RFC 3417 Transport Mappings for the Simple Network Management Protocol (SNMP)
RFC 3418 Management Information Base (MIB) for the Simple Network Management Protocol
(SNMP)
RFC 3576 Ext to RADIUS (CoA only)
RFC 4541 Considerations for Internet Group
Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Snooping Switches
RFC 4675 RADIUS VLAN & Priority
RFC 4861 Neighbor Discovery for IP version 6 (IPv6)
RFC 4862 IPv6 Stateless Address Autoconfiguration
UDLD (Uni-directional Link Detection)
IP multicast
RFC 1112 IGMP
RFC 2236 IGMPv2
RFC 2710 Multicast Listener Discovery (MLD) for IPv6
RFC 3376 IGMPv3 (host joins only)
RFC 4541 Considerations for Internet Group
Management Protocol (IGMP) and Multicast Listener
Discovery (MLD) Snooping Switches
IPv6
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2710 Multicast Listener Discovery (MLD) for IPv6
RFC 2925 Definitions of Managed Objects for Remote Ping, Traceroute, and Lookup Operations
(Ping only)
RFC 2925 Remote Operations MIB (Ping only)
RFC 3019 MLDv1 MIB
RFC 3315 DHCPv6 (client and relay)
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNS Extension for IPv6
RFC 3810 MLDv2 (host joins only)
RFC 4022 MIB for TCP
RFC 4113 MIB for UDP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 25
QuickSpecs
HP 2920 Switch Series
Technical Specifications
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Auto-configuration
MIBs
IEEE 802.1ap (MSTP and STP MIB's only)
RFC 1156 (TCP/IP MIB)
RFC 1157 A Simple Network Management Protocol (SNMP)
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1724 RIPv2 MIB
RFC 2021 RMONv2 MIB
RFC 2578 Structure of Management Information Version 2 (SMIv2)
RFC 2579 Textual Conventions for SMIv2
RFC 2580 Conformance Statements for SMIv2
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2819 RMON MIB
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
RFC 2933 IGMP MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3417 Simple Network Management Protocol (SNMP) over IEEE 802 Networks
RFC 3418 MIB for SNMPv3
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 1155 Structure of Management Information
RFC 1157 SNMPv1
RFC 2021 Remote Network Monitoring Management
Information Base Version 2 using SMIv2
RFC 2576 Coexistence between SNMP versions
RFC 2578 Structure of Management Information Version
2 (SMIv2)
RFC 2579 Textual Conventions for SMIv2
RFC 2580 Conformance Statements for SMIv2
RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events)
RFC 2819 Remote Network Monitoring Management Information Base
RFC 2856 Textual Conventions for Additional High
Capacity Data Types
RFC 2925 Definitions of Managed Objects for Remote
Ping, Traceroute, and Lookup Operations
RFC 3164 BSD syslog Protocol
RFC 3176 sFlow
RFC 3411 SNMP Management Frameworks
RFC 3412 SNMPv3 Message Processing
RFC 3414 SNMPv3 User-based Security Model (USM)
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 26
QuickSpecs
HP 2920 Switch Series
Technical Specifications
RFC 3415 SNMPv3 View-based Access Control Model VACM)
ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED)
SNMPv1/v2c/v3
XRMON
QoS/CoS
IEEE 802.1P (CoS)
RFC 2474 DiffServ Precedence, including 8 queues/port
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
Ingress Rate Limiting
Security
IEEE 802.1X Port Based Network Access Control
IEEE 802.1X:Port-Based Network Access Control (2001)
RFC 1321 The MD5 Message-Digest Algorithm
RFC 1334 PPP Authentication Protocols (PAP)
RFC 1492 An Access Control Protocol, Sometimes Called TACACS
RFC 1492 TACACS+
RFC 1994 PPP Challenge Handshake Authentication
Protocol (CHAP)
RFC 2082 RIP-2 MD5 Authentication
RFC 2104 Keyed-Hashing for Message Authentication
RFC 2138 RADIUS Authentication
RFC 2139 RADIUS Accounting
RFC 2246 Transport Layer Security (TLS)
RFC 2548 Microsoft Vendor-specific RADIUS Attributes
RFC 2618 RADIUS Authentication Client MIB
RFC 2620 RADIUS Accounting Client MIB
RFC 2716 PPP EAP TLS Authentication Protocol
RFC 2818 HTTP Over TLS
RFC 2865 RADIUS (client only)
RFC 2865 RADIUS Authentication
RFC 2866 RADIUS Accounting
RFC 2867 RADIUS Accounting Modifications for Tunnel Protocol Support
RFC 2868 RADIUS Attributes for Tunnel Protocol Support
RFC 2869 RADIUS Extensions
RFC 2882 NAS Requirements: Extended RADIUS Practices
RFC 3162 RADIUS and IPv6
RFC 3576 Dynamic Authorization Extensions to RADIUS
RFC 3579 RADIUS Support For Extensible Authentication Protocol (EAP)
RFC 3580 IEEE 802.1X Remote Authentication Dial In
User Service (RADIUS) Usage Guidelines
RFC 4576 RADIUS Attributes
Access Control Lists (ACLs)
draft-grant-tacacs-02 (TACACS)
Guest VLAN for 802.1x
MAC Authentication
MAC Lockdown
MAC Lockout
Port Security
Secure Sockets Layer (SSL)
SSHv2 Secure Shell
Web Authentication
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 27
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP 0.5 m Multimode
OM3 LC/LC Optical
Cable (AJ833A)
Cabling
Notes
Services
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 28
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP 1 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ834A)
Notes
Services
HP 2 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ835A)
Notes
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 29
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
Services
HP 5 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ836A)
Notes
Services
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a
tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic
cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 30
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP 15 m Multimode
OM3 LC/LC Optical
Cable (AJ837A)
Cabling
Notes
Services
HP 30 m Multimode
OM3 LC/LC Optical
Cable (AJ838A)
Cabling
Notes
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 31
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
Services
HP 50 m Multimode
OM3 LC/LC Optical
Cable (AJ839A)
Cabling
Notes
Services
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 32
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP 0.5 m PremierFlex Notes
OM3+ LC/LC Optical
Cable (BK837A)
Services
HP 1 m PremierFlex
OM3+ LC/LC Optical
Cable (BK838A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ± 3um; Cladding diameter: 125um ± 2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade - Low Smoke Zero Halogen (LSZH)
thermoplastic.
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL OFN FT4, ROHS. Cable also
has a longitudal white stripe that runs the entire length of the cable.
• Insertion Loss: less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 33
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP 2 m PremierFlex
OM3+ LC/LC Optical
Cable (BK839A)
Notes
Services
HP 5 m PremierFlex
OM3+ LC/LC Optical
Cable (BK840A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 34
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP 15 m PremierFlex
OM3+ LC/LC Optical
Cable (BK841A)
Notes
Services
HP 30 m PremierFlex
OM3+ LC/LC Optical
Cable (BK842A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 35
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP 50 m PremierFlex
OM3+ LC/LC Optical
Cable (BK843A)
Notes
Services
HP X410 1U Universal
4-post Rack Mounting
Kit (J9583A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
The rack mounting kit supports the 1U, full width switches in the
following switch series and the power supply: V1810 Series, E2510
Series, E2520 Series, E2610 Series, E2810 Series, E2910 Series,
E3500 Series, and the E620 Power Supply
This universal rack mounting kit is design to fit the following racks: HP
10K 10642, HP 10K 10842, Panduit CN, Panduit CS, Wrightline
Vantage S2, APC Netshelter 600mm, and APC Netshelter 800mm. It
may well fit many other brands and models too.
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
HP Identity Driven
Identity Driven Manager 3.0 software and license for managing up to 500 users.
Manager 3.0 Software-500-User License
RADIUS server support Microsoft Network Policy Server on Windows Server 2008 (32-bit)
(J9438A)
Microsoft Internet Authentication Service (IAS) on Windows Server 2003
(32-bit)
FreeRADIUS supplied with Red Hat Enterprise Linux (4.7 and 5.2)
RADIUS on the Network Access Controller 800
FreeRADIUS supplied with SuSE Linux Enterprise Server (9.3 and 10.2)
Features
Intuitive Explorer-style interface
OpenView NNM integration
Application of policies by user identity
Auto VLAN assignment
Auto set quality of service by user
Auto set bandwidth assignment by user
Rule-based access rights deployment
Dynamic rights assignment based on:
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 36
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
Time
Location
User system
Auto-discovery of:
Notes
RADIUS servers
Realms
Users
Additional specifications
Supports environments with up to 10,000 users.
Supports up to 10 RADIUS servers with HP Identity Driven
Manager agents installed.
Requires the HP PCM Plus 3.0 or greater network management
platform.
Please see HP PCM Plus 3.0 for hardware and software system
requirements.
Services
3-Year, 9x5 SW phone support, software updates (UQ124E)
3-year, 24x7 SW phone support, software updates (UQ125E)
Refer to the HP website at www.hp.com/networking/services for details
on the
service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
HP Identity Driven
License to add support for managing an additional 1,000 users with the Identity Driven
Manager 3.0 Software-- Manager 3.0 product.
Additional 1,000-User
License (J9440A)
RADIUS server support —
Features
—
Notes
Additional specifications
Supports environments with up to 10,000 users.
Supports up to 10 RADIUS servers with HP Identity Driven
Manager agents installed.
Requires the HP PCM Plus 3.0 or greater network management
platform.
Please see HP PCM Plus 3.0 for hardware and software system
requirements. Requires the HP Identity Driven Manager 3.0 base
product (J9438A).
Services
Multiple licenses for additional 1,000 users can be added to the base
HP Identity Driven Manager product to support larger numbers of users.
3-year, 24x7 SW phone support, software updates (UQ119E)
3-Year, 9x5 SW phone support, software updates (UQ118E)
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 37
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP Identity Driven
Identity Driven Manager 3.0 software and license for managing an unlimited number of
Manager 3.0 Software-- users.
Unlimited-User License
(J9439A)
RADIUS server support Microsoft Network Policy Server on Windows Server 2008 (32-bit)
Microsoft Internet Authentication Service (IAS) on Windows Server 2003
(32-bit)
FreeRADIUS supplied with Red Hat Enterprise Linux (4.7 and 5.2)
RADIUS on the Network Access Controller 800
FreeRADIUS supplied with SuSE Linux Enterprise Server (9.3 and 10.2)
Features
Intuitive Explorer-style interface
OpenView NNM integration
Application of policies by user identity
Auto VLAN assignment
Auto set quality of service by user
Auto set bandwidth assignment by user
Rule-based access rights deployment
Dynamic rights assignment based on:
Time
Location
User system
Auto-discovery of:
Notes
RADIUS servers
Realms
Users
Additional specifications
Supports environments with up to 10,000 users.
Supports up to 10 RADIUS servers with HP Identity Driven
Manager agents installed.
Requires the HP PCM Plus 3.0 or greater network management
platform.
Services
Please see HP PCM Plus 3.0 for hardware and software system
requirements.
3-year, 24x7 SW phone support, software updates (UQ133E)
3-Year, 9x5 SW phone support, software updates (UQ132E)
Refer to the HP website at www.hp.com/networking/services for details
on the
service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 38
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
To learn more, visit: www.hp.com/networking
© Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change
without notice. The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
DA - 14499 Worldwide QuickSpecs — Version 4 — 3.25.2013
Page 39
Download PDF
Similar pages