NGS-D200 Pro
Compact, 4+ megapixel encoder & decoder
The Barco NGS-D200 Pro encoder and decoder provides the highest
quality visual experience for collaborators. This encoder/decoder
supports over 4 megapixel video and graphics sources with audio
over any IP network environment.
Using the high performance Video-to-Data (V2D) codec, the NGSD200 accurately captures and streams content from point-tomultipoint with low latency, thus increasing communication and
cohesion among global teams. Integrated keyboard and mouse
control with encoding and decoding functionality in a single unit
creates a seamless environment for application sharing, simulation
and training needs.
Key features
(*)To preserve pixel detail, the codec will reduce the frame rate when the bandwidth
limit is reached
PRODUCT SPECIFICATIONS
NGS-D200 PRO
General specifications
Number of channels
1 video channel
USB ports
2xType A for KB/M; 1xType B towards host PC
Audio inputs, outputs
3.5 mm locking stereo jack audio line in-out (rear), 3.5 mm mic & headphone (front)
Audio channels
Stereo/mono
Audio format
Pulse code modulation (PCM)
Sync
Hardwired end-to-end; Timestamp NTP
Network
2x1000 Base T RJ 45 (redundant LAN)
Networking protocol
IPv4; Unicast-multicast (IGMP version 2)
Device configuration storage
Removable SD Card
QoS/error concealment
Advanced mechanisms to cope with packet loss, network latency, and jitter that are fully configurable
on the fly
Management Interface
Managed mode – Admin/Client interface, Web Endpoint Controller
Standalone mode – Web interface
Power supply
External, locking adapter
110/220 V AC, 60/50 Hz, 40W (136 BTU's/hr), auto switchable
Rack mount
Optional rack mount equipment available
Dimensions WxDxH
186.9mm x 121.92mm x 41.15mm / 7.37” x 4.8” x 1.62”
Weight
1.6 kg / 3.6 lbs
Dimensions packaged (W x H x D)
382mm x 273mm x 85mm | 15,04" x 10,75" x 3,35"
Packaged weight
2.0 kg / 4.40 lbs
Operating temperature range
0-40°C, 32-104F
Video
Tx – Passive loopback of local input signal
Rx – Passive loopback of local input signal, signal from remote source, PiP (with scaling, alpha and
chroma control)
Audio
Tx/Rx – Local audio input; signal from remote source; mix of both with mixing level control
Codec
Proprietary V2D (Video-to-Data) with 4:4:4 and 4:2:2 color sampling and real-time compression tuning
Software decodable
Remote keyboard and mouse
Secure remote keyboard and mouse HID support over IP Supported layouts:
d QWERTY (US, UK, NL, IT, SP, PO)
d AZERTY (FR, BE-comma, BE-dot)
d QWERTZ (DE-T1)
d Chinese Simplified
d Russian
Video board features
On-the-fly switching between Tx & Rx
Certification and compliance
Safety: UL/CSA/EN/IEC 60950-1 CB report
EMC: CE, FCC Part 15 Class A, CISPR 22, ICES-003, CCC
NGS-D200 Pro
Video inputs, outputs per channel
Dual-link DVI-I in / Dual-link DVI-D out
Resolution range
800x600 (min) to 2560x1600@60Hz or 3840x2160@30Hz (max)
Encode rate (resolution dependent)
60fps: 800x600, 1280x720, 1280x720, 1280x1024, 1600x1200, 1920x1080, 1920x1200
30fps: 2560x1600
15fps: 3840x2160
Pixel clock
DVI – 330 MHz
Analog – 170MHz
3D capability
No
Last updated: 21 Jan 2018
Technical specifications are subject to change without prior notice. Please check www.barco.com for the latest information.
ENABLING BRIGHT OUTCOMES
www.barco.com
Download PDF
Similar pages