QuickSpecs
HP 5130 EI Switch Series
Overview
HP 5130-24G-4SFP+ EI Switch
HP 5130-24G-SFP-4SFP+ EI Switch
HP 5130-48G-4SFP+ EI Switch
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 1
QuickSpecs
HP 5130 EI Switch Series
Overview
HP 5130-24G-PoE+-4SFP+ (370W) EI Switch
HP 5130-48G-PoE+-4SFP+ (370W) EI Switch
Models
HP 5130-24G-4SFP+ EI Switch
HP 5130-24G-SFP-4SFP+ EI Switch
HP 5130-48G-4SFP+ EI Switch
HP 5130-24G-PoE+-4SFP+ (370W) EI Switch
HP 5130-48G-PoE+-4SFP+ (370W) EI Switch
JG932A
JG933A
JG934A
JG936A
JG937A
Key features
Fixed 10G Ports for high speed Stacking or Uplinks
Support for multiple services
Comprehensive security control policies
Diversified quality of service (QoS) policies
Excellent manageability
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 2
QuickSpecs
HP 5130 EI Switch Series
Overview
Product overview
The HP 5130 EI Switch Series is comprised of Gigabit Ethernet switches that support static and RIP Layer 3 routing,
diversified services, and IPv6 forwarding, as well as provide four 10-Gigabit Ethernet (10GbE) extended interfaces. Unique
Intelligent Resilient Framework (IRF) technology creates a virtual fabric by managing several switches as one logical
device, which increases network resilience, performance, and availability, while reducing operational complexity. These
switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data
centers. High availability, simplified management, and comprehensive security control policies are among the key features
that distinguish this series.
Features and benefits
Quality of Service (QoS)
Broadcast control
allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Advanced classifier-based QoS
classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as
setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch
Powerful QoS feature
supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR
Traffic policing
supports Committed Access Rate (CAR) and line rate
Management
Friendly port names
allows assignment of descriptive names to ports
Remote configuration and management
enables configuration and management through a secure Web browser or a CLI located on a remote device
Manager and operator privilege levels
provides read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces
Command authorization
leverages HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also
provides an audit trail
Secure Web GUI
provides a secure, easy-to-use graphical interface for configuring
the module via HTTPS
Multiple configuration files
stores easily to the flash image
Complete session logging
provides detailed information for problem identification and resolution
SNMPv1, v2c, and v3
facilitate centralized discovery, monitoring, and secure management of networking devices
Remote monitoring (RMON)
uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group
plus a private alarm extension group
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
advertises and receives management information from adjacent devices on a network, facilitating easy mapping by
network
management applications
sFlow (RFC 3176)
provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network
performance; this allows network operators to gather a variety of sophisticated network statistics and information for
capacity planning and real-time network monitoring purposes
Management VLAN
segments traffic to and from management interfaces, including
CLI/telnet, a Web browser interface, and SNMP
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 3
QuickSpecs
HP 5130 EI Switch Series
Overview
Remote intelligent mirroring
mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on
the network
Device Link Detection Protocol (DLDP)
monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, which prevents
network problems such as loops
IPv6 management
provides future-proof networking because the switch is capable of being managed whether the attached network is
running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, syslogv6, FTPv6, SNMPv6, DHCPv6,
and RADIUS for IPv6
Troubleshooting
ingress and egress port monitoring enables network problem-solving; virtual cable tests provide visibility into cable
problems
Connectivity
Auto-MDIX
automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
Flow control
provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations
Jumbo packet support
supports up to 9216-byte frame size to improve the performance of large data transfers
High-density connectivity
provides up to 48 fixed 10/100/1000BASE-T ports in a Layer 2/Layer 3 switch
Optional 10GbE ports
deliver, through the use of optional modules, additional 10GbE connections, which are available for uplinks or highbandwidth server connections; flexibly support copper, XFP, SFP+, or CX4 local connections
IEEE 802.3at Power over Ethernet (PoE+) support
simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved
in supplying local power at each access point locatio
Ethernet operations, administration and maintenance (OAM)
detects data link layer problems that occurred in the "last mile" using the IEEE 802.3ah OAM standard; monitors the
status of the link between two devices
High-bandwidth CX4 local stacking
achieves 12 Gb/s per connection when using local CX4 stacking, allowing for up to 96 Gb/s total stacking bandwidth
(full duplex) in a resilient stacking configuration
Performance
Nonblocking architecture
up to 192 Gb/s nonblocking switching fabric provides wirespeed switching with up to 143 million pps throughput
Hardware-based wirespeed access control lists (ACLs)
help provide high levels of security and ease of administration without impacting network performance with a featurerich TCAM-based ACL implementation
Resiliency and high availability
Separate data and control paths
separates control from services and keeps service processing isolated; increases security and performance
External redundant power supply
provides high reliability
Smart link
allows 50 ms failover between links
Spanning Tree/MSTP, RSTP
provides redundant links while preventing network loops
Rapid Ring Protection Protocol (RRPP)
connects multiple switches in a high-performance ring using standard Ethernet technology; traffic can be rerouted
around the ring in less than 50 ms, reducing the impact on traffic and applications
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 4
QuickSpecs
HP 5130 EI Switch Series
Overview
Intelligent Resilient Framework (IRF)
creates virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router;
switches do not have to be co-located and can be part of a disaster-recovery system; servers or switches can be
attached using standard LACP for automatic load balancing and high availability; can eliminate the need for complex
protocols like Spanning Tree Protocol, Equal-Cost Multipath (ECMP), or VRRP, thereby simplifying network
operation
Layer 2 switching
16K MAC address table
provides access to many Layer 2 devices
VLAN support and tagging
supports IEEE 802.1Q with 4,094 simultaneous VLAN IDs
GARP VLAN Registration Protocol
allows automatic learning and dynamic assignment of VLANs
IEEE 802.1ad QinQ and selective QinQ
increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a
high-speed
campus or metro network
10GbE port aggregation
allows grouping of ports to increase overall data throughput to a remote device
Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping
controls and manages the flooding of multicast packets in a Layer 2 network
Per-VLAN Spanning Tree Plus (PVST+)
allows each VLAN to build a separate spanning tree to improve link bandwidth usage in network environments with
multiple VLANs
Layer 3 services
Address Resolution Protocol (ARP)
determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows
detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are
separated by a Layer 2 network
Dynamic Host Configuration Protocol (DHCP)
simplifies the management of large IP networks; supports client; DHCP Relay enables DHCP operation across
subnets
Loopback interface address
defines an address that can always be reachable, improving diagnostic capability
User Datagram Protocol (UDP) helper function
allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses
and prevents server spoofing for UDP services such as DHCP
Route maps
provide more control during route redistribution; allow filtering and altering of route metrics
Layer 3 routing
Static IP routing
provides manually configured routing for both IPv4 and IPv6 networks
Security
Access control lists (ACLs)
provides IP Layer 2 to Layer 4 traffic filtering; supports global ACL, VLAN ACL, port ACL, and IPv6 ACL
IEEE 802.1X
industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a
RADIUS erver
MAC-based authentication
client is authenticated with the RADIUS server based on the client's MAC address
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 5
QuickSpecs
HP 5130 EI Switch Series
Overview
Identity-driven security and access control
Per-user ACLs
permits or denies user access to specific network resources based on user identity and time of day, allowing multiple
types of users on the same network to access specific network services without risking network security or providing
unauthorized access to sensitive data
Automatic VLAN assignment
automatically assigns users to the appropriate VLAN based on their identities
Secure management access
delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
Secure FTP
allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying
of a switch configuration file
Guest VLAN
provides a browser-based environment to authenticated clients that is similar to IEEE 802.1X
Endpoint Admission Defense (EAD)
provides security policies to users accessing a network
Port security
allows access only to specified MAC addresses, which can be learned or specified by the administrator
Port isolation
secures and adds privacy, and prevents malicious attackers from obtaining user information
STP BPDU port protection
blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
STP root guard
protects the root bridge from malicious attacks or configuration mistakes
DHCP protection
blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
IP source guard
helps prevent IP spoofing attacks
Dynamic ARP protection
blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
RADIUS/HWTACACS
eases switch management security administration by using a password authentication server
Convergence
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
facilitates easy mapping using network management applications with LLDP automated device discovery protocol
LLDP-MED
is a standard extension that automatically configures network devices, including LLDP-capable IP phones
LLDP-CDP compatibility
receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation
IEEE 802.3af Power over Ethernet
provides up to 15.4 W per port to PoE-powered devices such as IP phones, wireless access points, and video
cameras
PoE allocations
supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for
more efficient energy savings
Voice VLAN
automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
IP multicast snooping (data-driven IGMP)
prevents flooding of IP multicast traffic
Device support
Cisco prestandard PoE support
detects and provides power to Cisco's prestandard PoE devices such as wireless LAN access points and IP phones
Additional information
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 6
QuickSpecs
HP 5130 EI Switch Series
Overview
Green IT and power
improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and
utilizes
variable-speed fans, reducing energy costs
Green initiative support
provides support for RoHS and WEEE regulations
Warranty and support
Lifetime Warranty 2.0
advance hardware replacement for as long as the original end user owns the product with next-business-day delivery
(available in most countries)†
Electronic and telephone support (for Lifetime Warranty 2.0)
limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours
telephone support isavailable from HP for the entire warranty period; to reach our support centers, refer to
www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase,
refer to www.hp.com/networking/warrantysummary
Software releases
to find software for your product, refer to www.hp.com/networking/support; for details on the software releases
available with your product purchase, refer to
†HP warranty includes repair or replacement of hardware for as long as the original end-user owns the product, with next
business day advance replacement (available in most countries). The disk drive included with HP AllianceOne Advanced
Services and Services zl Modules, HP Threat Management Services zl Module, HP AllianceOne Extended zl Module with
Riverbed Steelhead, HP MSM765 zl Mobility Controller and HP Survivable Branch Communication zl Module powered by
Microsoft® Lync has a five-year hardware warranty. For details, refer to the Software license and hardware warranty
statements at www.hp.com/networking/warranty.
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 7
QuickSpecs
HP 5130 EI Switch Series
Configuration
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or RackShippable solution.
Switch Chassis
HP 5130-24G-4SFP+ EI Switch
24 RJ-45 autosensing 10/100/1000 ports
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power supply included
1U - Height
JG932A
See
Configuration
Note:2, 4, 5
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JG932A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG932A#B2C
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JG932A#B2E
HP 5130-24G-SFP-4SFP+ EI Switch
24 SFP ports
(Of the 24, 8 are dual-personality ports - autosensing 10/100/1000BASE-T or SFP)
min=0 \ max=24 SFP Transceivers
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Must select min 1 power supply
1U - Height
JG933A
See
Configuration
Note:1, 2
HP 5130-48G-4SFP+ EI Switch
48 RJ-45 autosensing 10/100/1000 ports
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power supply included
1U - Height
JG934A
See
Configuration
Note:2, 4, 5
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JG934A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG934A#B2C
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JG934A#B2E
HP 5130-24G-PoE+-4SFP+ EI Swch
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
JG936A
Page 8
QuickSpecs
HP 5130 EI Switch Series
Configuration
24 RJ-45 autosensing 10/100/1000 ports
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power supply included
1U - Height
See
Configuration
Note:2, 4, 5
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JG936A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG936A#B2C
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JG936A#B2E
HP 5130-48G-PoE+-4SFP+ EI Swch
48 RJ-45 autosensing 10/100/1000 ports
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power supply included
1U - Height
JG937A
See
Configuration
Note:2, 4, 5
PDU Cable NA/MEX/TW/JP
"C15 PDU Jumper Cord (NA/MEX/TW/JP)
JG937A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG937A#B2C
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JG937A#B2E
Configuration Rules:
Note 1
Note 2
The following Transceivers install into this Switch: (SFP Ports)
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X115 100M SFP LC BX 10-U Transceiver
HP X115 100M SFP LC BX 10-D Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC LH100 Transceiver
JD102B
JD120B
JD090A
JD091A
JD100A
JD101A
JD118B
JD119B
JD089B
JD098B
JD099B
JD062A
JD061A
JD063B
JD103A
The following Transceivers install into this Switch: (SFP+ Ports)
HP X120 1G SFP LC SX Transceiver
JD118B
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 9
QuickSpecs
HP 5130 EI Switch Series
Configuration
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC LH100 Transceiver
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JD119B
JD089B
JD098B
JD099B
JD062A
JD061A
JD063B
JD103A
JD092B
JD094B
JD095C
JD096C
JD097C
JG081C
Note 4
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) or #B2E. (See
Localization Menu)
Note 5
#B2E is Offered only in NA, Mexico, Taiwan and Japan.
Remarks
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or
#B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box
Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America,
Mexico, Taiwan, and Japan)
Box Level Integration CTO Models
CTO Solution Sku
HP 51xx CTO Switch Solution
SSP trigger sku
JG706A
CTO Base Sku
HP 5130-24G-4SFP+ EI Switch
24 RJ-45 autosensing 10/100/1000 ports
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power supply included
1U - Height
JG932A
See
Configuration
Note:2, 4, 5, 6, 7
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JG932A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG932A#B2C
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JG932A#B2E
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 10
QuickSpecs
HP 5130 EI Switch Series
Configuration
HP 5130-24G-SFP-4SFP+ EI Switch
24 SFP ports
(Of the 24, 8 are dual-personality ports - autosensing 10/100/1000BASE-T or SFP)
min=0 \ max=24 SFP Transceivers
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Must select min 1 power supply
1U - Height
JG933A
See
Configuration
Note:1, 2, 6, 7
HP 5130-48G-4SFP+ EI Switch
48 RJ-45 autosensing 10/100/1000 ports
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power supply included
1U - Height
JG934A
See
Configuration
Note:2, 4, 5, 6, 7
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JG934A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG934A#B2C
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JG934A#B2E
PDU Cable NA/MEX/TW/JP
"C15 PDU Jumper Cord (NA/MEX/TW/JP)
JG936A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG936A#B2C
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JG936A#B2E
HP 5130-48G-PoE+-4SFP+ EI Swch
48 RJ-45 autosensing 10/100/1000 ports
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power supply included
1U - Height
JG937A
See
Configuration
Note:2, 4, 5, 6, 7
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JG937A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG937A#B2C
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JG937A#B2E
Configuration Rules:
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 11
QuickSpecs
HP 5130 EI Switch Series
Configuration
Note 1
The following Transceivers install into this Switch: (SFP Ports) (Use #0D1 quoted to
switch if switch is CTO) - if applicable
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X115 100M SFP LC BX 10-U Transceiver
HP X115 100M SFP LC BX 10-D Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC LH100 Transceiver
Note 4
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power
Cord) or #B2E. (See Localization Menu)
Note 5
#B2E is Offered only in NA, Mexico, Taiwan and Japan.
Note 6
If this Switch is selected, Then a Minimum of 1 factory integrated accessory must be
ordered and integrated to CTO chassis. See Menu below, option must have a #0D1 to
be integrated to the CTO Chassis.
Note 7
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is
required on the Switch Chassis and integrated to the JG706A - HP 51xx CTO
Enablement. (Min 1/Max 1 Switch per SSP)
Remarks
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico,
Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for
BTO and Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only
in North America, Mexico, Taiwan, and Japan)
JD102B
JD120B
JD090A
JD091A
JD100A
JD101A
JD118B
JD119B
JD089B
JD098B
JD099B
JD062A
JD061A
JD063B
JD103A
Rack Level Integration CTO Models
Switch Chassis
HP 5130-24G-4SFP+ EI Switch
24 RJ-45 autosensing 10/100/1000 ports
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power supply included
1U - Height
JG932A
See
Configuration
Note:2, 4, 7
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JG932A#B2B
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 12
QuickSpecs
HP 5130 EI Switch Series
Configuration
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG932A#B2C
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JG932A#B2E
HP 5130-24G-SFP-4SFP+ EI Switch
24 SFP ports
(Of the 24, 8 are dual-personality ports - autosensing 10/100/1000BASE-T or SFP)
min=0 \ max=24 SFP Transceivers
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Must select min 1 power supply
1U - Height
JG933A
See
Configuration
Note:1, 2, 7
HP 5130-48G-4SFP+ EI Switch
48 RJ-45 autosensing 10/100/1000 ports
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power supply included
1U - Height
JG934A
See
Configuration
Note:2, 4, 7
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JG934A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG934A#B2C
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JG934A#B2E
HP 5130-24G-PoE+-4SFP+ EI Swch
24 RJ-45 autosensing 10/100/1000 ports
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power supply included
1U - Height
JG936A
See
Configuration
Note:2, 4, 7
PDU Cable NA/MEX/TW/JP
"C15 PDU Jumper Cord (NA/MEX/TW/JP)
JG936A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG936A#B2C
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JG936A#B2E
HP 5130-48G-PoE+-4SFP+ EI Swch
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
JG937A
Page 13
QuickSpecs
HP 5130 EI Switch Series
Configuration
48 RJ-45 autosensing 10/100/1000 ports
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power supply included
1U - Height
See
Configuration
Note:2, 4, 7
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JG937A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JG937A#B2C
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JG937A#B2E
Configuration Rules:
Note 1
Note 2
The following Transceivers install into this Switch: (SFP Ports) (Use #0D1 quoted to
switch if switch is CTO) - if applicable
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X115 100M SFP LC BX 10-U Transceiver
HP X115 100M SFP LC BX 10-D Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC LH100 Transceiver
JD102B
JD120B
JD090A
JD091A
JD100A
JD101A
JD118B
JD119B
JD089B
JD098B
JD099B
JD062A
JD061A
JD063B
JD103A
The following Transceivers install into this Switch: (SFP+ Ports) (Use #0D1 or #B01
quoted to switch if switch is CTO) - if applicable
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC LH100 Transceiver
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JD118B
JD119B
JD089B
JD098B
JD099B
JD062A
JD061A
JD063B
JD103A
JD092B
JD094B
JD095C
JD096C
JD097C
JG081C
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 14
QuickSpecs
HP 5130 EI Switch Series
Configuration
Note 4
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power
Cord) . (See Localization Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be
the Defaulted Power Cable option on the Switches/Routers.
Note 7
If HP CTO Switch Chassis is selected for Rack Level Integration, Then the Switch needs
to integrate (with #0D1) to the Rack.
Remarks
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico,
Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for
BTO and Box Level CTO)
Transceivers
SFP Transceivers
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X110 100M SFP LC BX 10-U Transceiver
HP X110 100M SFP LC BX 10-D Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X120 1G SFP LC LH40 1550nm XCVR
HP X125 1G SFP LC LH40 1310nm XCVR
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC LH100 Transceiver
JD102B
JD120B
JD090A
JD091A
JD100A
JD101A
JD118B
JD119B
JD089B
JD098B
JD099B
JD062A
JD061A
JD063B
JD103A
SFP+ Transceivers
HP X130 SFP+ LC SR Transceiver
HP X130 SFP+ LC LR Transceiver
HP X240 10G SFP+ SFP+ 0.65m DAC Cable
HP X240 10G SFP+ SFP+ 1.2m DAC Cable
HP X240 10G SFP+ SFP+ 3m DAC Cable
HP X240 10G SFP+ SFP+ 5m DAC Cable
JD092B
JD094B
JD095C#B01
JD096C#B01
JD097C#B01
JG081C#B01
Cables
Multi-Mode Cables
HP .5m Multi-mode OM3 LC/LC FC Cable
HP 1m Multi-mode OM3 LC/LC FC Cable
HP 2 m Multimode OM3 LC/LC FC Cable
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
AJ833A
AJ834A
AJ835A
Page 15
QuickSpecs
HP 5130 EI Switch Series
Configuration
HP 5 m Multimode OM3 LC/LC FC Cable
HP 15 m Multimode OM3 LC/LC FC Cable
HP 30 m Multimode OM3 LC/LC FC Cable
HP 50 m Multimode OM3 LC/LC FC Cable
HP Premier Flex LC/LC OM4 2f 1m Cbl
HP Premier Flex LC/LC OM4 2f 2m Cbl
HP Premier Flex LC/LC OM4 2f 5m Cbl
HP Premier Flex LC/LC OM4 2f 15m Cbl
HP Premier Flex LC/LC OM4 2f 30m Cbl
HP Premier Flex LC/LC OM4 2f 50m Cbl
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Internal Power Supplies
(JG933A Switch Only ) (std 0 // max 2) User Selection (min 1 // max 2) per switch enclosure
HP 5500 150WDC Power Supply
JD366A
See
Configuration
Note:4
HP 5500 150WAC Power Supply
includes 1 x c13, 910w
JD362A
See
Configuration
Note:2, 3, 4
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JD362A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JD362A#B2C
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
JD362A#B2E
Configuration Rules:
Note 2
If #B2E is selected Then replace Localized option with #B2E for power supply and with
#B2E for switch . (Offered only in North America, Mexico, Taiwan, and Japan)
Note 3
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power
Cord) . (See Localization Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be
the Defaulted Power Cable option on the Switches/Routers.
Note 4
Not supported on JG932A, JG934A, JG936A, JG937A
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico,
Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for
BTO and Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 16
QuickSpecs
HP 5130 EI Switch Series
Configuration
in North America, Mexico, Taiwan, and Japan)
Switch Enclosure Options
External/Redundant Power Supplies
HP RPS 800 Redundant Power Supply
Height = 1U
includes 1 x c13, 800w
JD183A
See
Configuration
Note:2, 3, 5, 7
HP RPS1600 Redundant Power System
Height = 1U
includes 1 x c13, 1600w and Power Supply port
JG136A
See
Configuration
Note:2, 3, 6
HP RPS1600 1600W AC Power Supply
Installs into JG136A only
JG137A
See
Configuration
Note:1, 6
Cofiguration Rules:
Note 1
If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power
System must be on order or onsite.
Note 2
Localization required. (See Localization Menu for list.)
Note 3
Only 1 JD183A or JG136A can be connected per switch.
Note 5
Supported on JG934A
Note 6
Supported on JG934A, JG933A, JG936A, JG937A
Note 7
Supported on JD366A when used in JG933A
External/Redundant Power Cables
HP X290 RPS 500/800 list V 1m Cable
JD186A
See
Configuration
Note:1
HP X290 1000 A JD5 2m RPS Cable
JD187A
See
Configuration
Note:2
HP RPS 1000/1600 A JD5 Non-PoE 2m Cable
JD188A
See
Configuration
Note:3
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 17
QuickSpecs
HP 5130 EI Switch Series
Configuration
Cofiguration Rules:
Note 1
Supported on JG934A and JD366A when used in JG933A or JG943A, to connect to
JD183A.
Note 2
Supported on JG936A, JG937A to connect to JG136A.
Note 3
Supported on JG934A, JG933A, to connect to JG136A.
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 18
QuickSpecs
HP 5130 EI Switch Series
Technical Specifications
HP 5130-24G-4SFP+ EI Switch (JG932A)
I/O ports and slots
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 SFP+ fixed 1000/10000 SFP+ ports
Additional ports and
1 RJ-45 serial console port
slots
Physical
Dimensions
17.32(w) x 6.3(d) x 1.72(h) in (44 x 16 x 4.36 cm) (1U height)
characteristics
Weight
11.02 lb (5 kg)
Memory and processor 1 GB SDRAM, 128 MB flash; packet buffer size: 1.5 MB
Mounting and
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
enclosure
Performance
1000 Mb Latency
< 5 µs
10 Gbps Latency
< 1.5 µs
Throughput
96 Mpps
Routing/Switching
128 Gbps
capacity
Reliability
Environment
Electrical
characteristics
Safety
Routing table size
512 entries (IPv4), 256 entries (IPv6)
MAC address table size 16384 entries
MTBF (years)
98.1
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Acoustic
High-speed fan: 39.7 dB; ISO 7779
Frequency
50/60 Hz
Maximum heat
64/88 BTU/hr (67.52/92.84 kJ/hr)
dissipation
AC voltage
100-240 VAC
Current
2A
Maximum power rating26 W
Idle power
19 W
Notes
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser ProductsPart 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA
21 CFR Subchapter J; NOM; ROHS Compliance
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 19
QuickSpecs
HP 5130 EI Switch Series
Technical Specifications
Emissions
Immunity
Management
Services
EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A; EN 61000-4-11:2004; ANSI C63.42009; EN
61000-3-3:2008; VCCI V-4/2012.04; EN 6100-3-2:2006+A1:2009 + A2:2009; EN 61000-32:2006+A1:2009+A2:2009 ; EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006; EN
61000-4-6:2009; AS/NZS CISPR 22:2009 Class A; CISPR 22:2008 Class A; EN 55022:2010
Class A; EN 61000-4-29: 2000; CISPR 24:2010; EN 300 386 V1.6.1; VCCI V-3/2013.04 Class A
Generic
EN 55024
ESD
EN300 386
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 5130-24G-SFP-4SFP+ EI Switch (JG933A)
I/O ports and slots
16 SFP 100/1000 Mbps ports
8 SFP dual-personality ports; 100/1000BaseX or 100/1000BASET RJ-45 Combo Ports
4 SFP+ fixed 1000/10000 SFP+ ports
Additional ports and
slots
Power supplies
1 RJ-45 serial console port
2 power supply slots
1 minimum power supply required (ordered separately)
Physical
Dimensions
17.32(w) x 14.17(d) x 1.72(h) in (44 x 36 x 4.36 cm) (1U height)
characteristics
Weight
17.64 lb (8 kg)
Memory and processor 1 GB SDRAM, 128 MB flash; packet buffer size: 1.5 MB
Mounting and
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
enclosure
Performance
1000 Mb Latency
< 5 µs
10 Gbps Latency
< 1.5 µs
Throughput
96 Mpps
Routing/Switching
128 Gbps
capacity
Routing table size
512 entries (IPv4), 256 entries (IPv6)
MAC address table size 16384 entries
Reliability
MTBF (years)
52.79
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Acoustic
Low-speed fan: 47.1 dB, High-speed fan: 50.7 dB; ISO 7779
Electrical
Frequency
50/60 Hz
characteristics
Maximum heat
102/204 BTU/hr (107.61/215.22 kJ/hr), for AC Powered units. For DC
dissipation
powered units heat dissipation is 130BTU/hr min, 232BTU/hr max.
AC voltage
100 - 240 VAC
DC voltage
-48 to -60 VDC
Current
5A
Maximum power rating60 W
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 20
QuickSpecs
HP 5130 EI Switch Series
Technical Specifications
Idle power
Notes
Safety
Emissions
Immunity
Management
Services
30 W
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
Power Ratings for AC Power Suppply indicated above.
For DC input power, Idle Power is 38W and Max is 68W.
DC Max input current is 8A. Units are supplied without a power supply.
Customer must buy 1 or 2 JD362A(AC) or JD366A (DC) power supply.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser ProductsPart 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA
21 CFR Subchapter J; NOM; ROHS Compliance
EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A; EN 61000-4-11:2004; ANSI C63.42009; EN 61000-3-3:2008; VCCI V-4/2012.04; EN 6100-3-2:2006+A1:2009 + A2:2009; EN 610003-2:2006+A1:2009+A2:2009 ; EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006; EN
61000-4-6:2009; AS/NZS CISPR 22:2009 Class A; CISPR 22:2008 Class A; EN 55022:2010
Class A; EN 61000-4-29: 2000; CISPR 24:2010; EN 300 386 V1.6.1; VCCI V-3/2013.04 Class A
Generic
EN 55024
ESD
EN300 386
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 5130-48G-4SFP+ EI Switch (JG934A)
I/O ports and slots
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 SFP+ fixed 1000/10000 SFP+ ports
Additional ports and
1 RJ-45 serial console port
slots
Physical
Dimensions
17.32(w) x 10.24(d) x 1.72(h) in (44 x 26 x 4.36 cm) (1U height)
characteristics
Weight
11.02 lb (5 kg)
Memory and processor 1 GB SDRAM, 128 MB flash; packet buffer size: 3 MB
Mounting and
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
enclosure
Performance
1000 Mb Latency
< 5 µs
10 Gbps Latency
< 1.5 µs
Throughput
130.9 Mpps
Routing/Switching
176 Gbps
capacity
Routing table size
512 entries (IPv4), 256 entries (IPv6)
MAC address table size 16384 entries
Reliability
MTBF (years)
61.4
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, noncondensing
humidity
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 21
QuickSpecs
HP 5130 EI Switch Series
Technical Specifications
Electrical
characteristics
Safety
Emissions
Immunity
Management
Services
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Acoustic
Low-speed fan: 43.1 dB, High-speed fan: 53.4 dB; ISO 7779
Frequency
50/60 Hz
Maximum heat
130/153 BTU/hr (137.15/161.42 kJ/hr), For AC powered units. For DC
dissipation
powered units heat dissipation is 130BTU/hr min, 171 BTU/hr max
AC voltage
100 - 240 VAC
DC voltage
-48 to -60 VDC
Current
10 A
Maximum power rating45 W
Idle power
38 W
Notes
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
Power ratings for AC power indicated above. Current used is 5A Max
when DC Power used. For DC input power, idle power is 38W,
maximum DC power used is 50W.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser ProductsPart 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA
21 CFR Subchapter J; NOM; ROHS Compliance
EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A; EN 61000-4-11:2004; ANSI C63.42009; EN
61000-3-3:2008; VCCI V-4/2012.04; EN 6100-3-2:2006+A1:2009 + A2:2009; EN 61000-32:2006+A1:2009+A2:2009 ; EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006; EN
61000-4-6:2009; AS/NZS CISPR 22:2009 Class A; CISPR 22:2008 Class A; EN 55022:2010
Class A; EN 61000-4-29: 2000; CISPR 24:2010; EN 300 386 V1.6.1; VCCI V-3/2013.04 Class A
Generic
EN 55024
ESD
EN300 386
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 5130-24G-PoE+-4SFP+ (370W) EI Switch (JG936A)
I/O ports and slots
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 SFP+ fixed 1000/10000 SFP+ ports
Additional ports and
1 RJ-45 serial console port
slots
Physical
Dimensions
17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.37 cm) (1U height)
characteristics
Weight
17.64 lb (8 kg)
Memory and processor 1 GB SDRAM, 128 MB flash; packet buffer size: 1.5 MB
Mounting and
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
enclosure
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 22
QuickSpecs
HP 5130 EI Switch Series
Technical Specifications
Performance
Reliability
Environment
Electrical
characteristics
Safety
Emissions
Immunity
Management
Services
1000 Mb Latency
< 5 µs
10 Gbps Latency
< 1.5 µs
Throughput
96 Mpps
Routing/Switching
128 Gbps
capacity
Routing table size
512 entries (IPv4), 256 entries (IPv6)
MAC address table size 16384 entries
MTBF (years)
48.3
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Acoustic
Low-speed fan: 49.8 dB, High-speed fan: 52.9 dB; ISO 7779
Frequency
50/60 Hz
Maximum heat
dissipation
102/1569 BTU/hr (107.61/1655.29 kJ/hr), for AC Power. For DC Power
min heat dissipation is 85BTU/hr and max heat dissipation is 2559
BTU/hr
AC voltage
100 - 240 VAC
Current
10 A
Maximum power rating460 W
Idle power
N/A
PoE power
370 W PoE+
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated. PoE Power is the power supplied
by the internal power supply. When supplemented with the use of an HP
RPS1600 Redundant Power System, up to 740 W of PoE+ can be
supplied.
Max current rating for DC power is 25A. AC Input power is 30W typical,
and 460W max(including 370W PoE+ consumption. DC Input voltage
range is -54 to -57VDC. Total DC input power is 25W Typical and 790W
with 740W PoE+ Power consumption. DC Input voltage range is 54VDC to -57VDC. DC Input Source is the HP RPS1600.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser ProductsPart 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA
21 CFR Subchapter J; NOM; ROHS Compliance
EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A; EN 61000-4-11:2004; ANSI C63.42009; EN 61000-3-3:2008; VCCI V-4/2012.04; EN 6100-3-2:2006+A1:2009 + A2:2009; EN 610003-2:2006+A1:2009+A2:2009 ; EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006; EN
61000-4-6:2009; AS/NZS CISPR 22:2009 Class A; CISPR 22:2008 Class A; EN 55022:2010
Class A; EN 61000-4-29: 2000; CISPR 24:2010; EN 300 386 V1.6.1; VCCI V-3/2013.04 Class A
Generic
EN 55024
ESD
EN300 386
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 23
QuickSpecs
HP 5130 EI Switch Series
Technical Specifications
HP 5130-48G-PoE+-4SFP+ (370W) EI Switch (JG937A)
I/O ports and slots
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 SFP+ fixed 1000/10000 SFP+ ports
Additional ports and
1 RJ-45 serial console port
slots
Physical
Dimensions
17.32(w) x 14.17(d) x 1.72(h) in (44 x 36 x 4.36 cm) (1U height)
characteristics
Weight
17.64 lb (8 kg)
Memory and processor 1 GB SDRAM, 128 MB flash; packet buffer size: 3 MB
Mounting
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
1000 Mb Latency
< 5 µs
10 Gbps Latency
< 1.5 µs
Throughput
130.9 Mpps
Routing/Switching
176 Gbps
capacity
Environment
Electrical
characteristics
Routing table size
512 entries (IPv4), 256 entries (IPv6)
MAC address table size 16384 entries
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Acoustic
Low-speed fan: 50.6 dB, High-speed fan: 54.6 dB; ISO 7779
Frequency
50/60 Hz
Maximum heat
160/1671 BTU/hr (168.8/1762.91 kJ/hr), for AC power. For DC power
dissipation
min heat dissipation is 147BTU/hr and 3037BTU/hr max.
AC voltage
100 - 240 VAC
Current
10 A
Maximum power rating490 W
Idle power
47 W
PoE power
370 W PoE+
Notes
Idle power is the actual power consumption of the device with no ports
connected. Maximum power rating and maximum heat dissipation are
the worst-case theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated. PoE Power is the power supplied
by the internal power supply. When supplemented with the use of an HP
RPS1600 Redundant Power System, up to 740 W of PoE+ can be
supplied.
Max current rating for DC power is 25A. AC Input power is 47W typical,
and 490W max(including 370W PoE+ consumption. DC Input voltage
range is -54 to -57VDC. Total DC input power is 43W typical and 890W
with 800W PoE+ Power consumption. DC Input voltage range is 54VDC to -57VDC. DC Input Source is the HP RPS1600.
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 24
QuickSpecs
HP 5130 EI Switch Series
Technical Specifications
Safety
Emissions
Immunity
Management
Services
Standards and
protocols
(applies to all products in
series)
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser ProductsPart 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA
21 CFR Subchapter J; NOM; ROHS Compliance
EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A; EN 61000-4-11:2004; ANSI C63.42009; EN 61000-3-3:2008; VCCI V-4/2012.04; EN 6100-3-2:2006+A1:2009 + A2:2009; EN 610003-2:2006+A1:2009+A2:2009 ; EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006; EN
61000-4-6:2009; AS/NZS CISPR 22:2009 Class A; CISPR 22:2008 Class A; EN 55022:2010
Class A; EN 61000-4-29: 2000; CISPR 24:2010; EN 300 386 V1.6.1; VCCI V-3/2013.04 Class A
Generic
EN 55024
ESD
EN300 386
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
Device management
RFC 1157 SNMPv1/v2c
RFC 1305 NTPv3
RFC 2573 (SNMPv3 Applications)
RFC 2819 (RMON groups Alarm, Event, History
and Statistics only)
RFC 3416 (SNMP Protocol Operations v2)
HTML and telnet management
Multiple Configuration Files
SNMP v3 and RMON RFC support
SSHv1/SSHv2 Secure Shell
TACACS/TACACS+
Web UI
IPv6
RFC 2461 IPv6 Neighbor Discovery
RFC 2463 ICMPv6
RFC 3162 RADIUS and IPv6
RFC 3306 Unicast-Prefix-based IPv6 Multicast
Addresses
RFC 3315 DHCPv6 (client and relay)
MIBs
RFC 1212 Concise MIB Definitions
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1757 Remote Network Monitoring MIB
RFC 2096 IP Forwarding Table MIB
General protocols
RFC 2233 Interface MIB
IEEE 802.1ad Q-in-Q
RFC 2571 SNMP Framework MIB
IEEE 802.1D MAC Bridges
RFC 2572 SNMP-MPD MIB
IEEE 802.1p Priority
RFC 2573 SNMP-Notification MIB
IEEE 802.1Q VLANs
RFC 2573 SNMP-Target MIB
IEEE 802.1s Multiple Spanning Trees
RFC 2574 SNMP USM MIB
IEEE 802.1w Rapid Reconfiguration of Spanning RFC 2618 RADIUS Authentication Client MIB
Tree
RFC 2620 RADIUS Accounting Client MIB
IEEE 802.1X PAE
RFC 2665 Ethernet-Like-MIB
IEEE 802.3 Type 10BASE-T
RFC 2668 802.3 MAU MIB
IEEE 802.3ab 1000BASE-T
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
IEEE 802.3ad Link Aggregation Control Protocol RFC 2737 Entity MIB (Version 2)
(LACP)
RFC 2819 RMON MIB
IEEE 802.3ae 10-Gigabit Ethernet
RFC 2863 The Interfaces Group MIB
IEEE 802.3af Power over Ethernet
RFC 2925 Ping MIB
IEEE 802.3i 10BASE-T
RFC 3414 SNMP-User based-SM MIB
IEEE 802.3u 100BASE-X
RFC 3415 SNMP-View based-ACM MIB
IEEE 802.3x Flow Control
RFC 3418 MIB for SNMPv3
IEEE 802.3z 1000BASE-X
RFC 3621 Power Ethernet MIB
RFC 768 UDP
Network management
RFC 783 TFTP Protocol (revision 2)
IEEE 802.1AB Link Layer Discovery Protocol
RFC 791 IP
(LLDP)
RFC 792 ICMP
RFC 2819 Four groups of RMON: 1 (statistics),
RFC 793 TCP
2 (history), 3 (alarm) and 9 (events)
RFC 826 ARP
ANSI/TIA-1057 LLDP Media Endpoint Discovery
RFC 854 TELNET
(LLDP-MED)
RFC 951 BOOTP
SNMPv1/v2c/v3
RFC 1213 Management Information Base for
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 25
QuickSpecs
HP 5130 EI Switch Series
Technical Specifications
Network Management of TCP/IP-based internets
RFC 1305 NTPv3
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1812 IPv4 Routing
RFC 1866 Hypertext Markup Language - 2.0
RFC 2131 DHCP
RFC 2236 IGMP Snooping
RFC 2616 HTTP Compatibility v1.1
RFC 2665 Definitions of Managed Objects for
the Ethernet-like Interface Types
RFC 2668 Definitions of Managed Objects for
IEEE 802.3 Medium Attachment Units (MAUs)
RFC 2865 Remote Authentication Dial In User
Service (RADIUS)
RFC 2866 RADIUS Accounting
RFC 3414 User-based Security Model (USM) for
version 3 of the Simple Network Management
Protocol (SNMPv3)
RFC 3415 View-based Access Control Model
(VACM) for the Simple Network Management
Protocol (SNMP)
RFC 3418 Management Information Base (MIB)
for the Simple Network Management Protocol
(SNMP)
RFC 3576 Ext to RADIUS (CoA only)
RFC 4213 Basic IPv6 Transition Mechanisms
802.1r - GARP Proprietary Attribute Registration
Protocol (GPRP)
Security
IEEE 802.1X Port Based Network Access
Control
RFC 1492 TACACS+
RFC 2138 RADIUS Authentication
RFC 2139 RADIUS Accounting
RFC 2865 RADIUS (client only)
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
SSHv2 Secure Shell
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 26
QuickSpecs
HP 5130 EI Switch Series
Accessories
HP 5130 EI Switch Series accessories
Transceivers
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X115 100M SFP LC BX 10-U Transceiver
HP X115 100M SFP LC BX 10-D Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC LH100 Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HP X130 10G SFP+ LC LH 80km Transceiver
JD090A
JD091A
JD102B
JD120B
JD100A
JD101A
JD061A
JD062A
JD063B
JD103A
JD118B
JD119B
JD098B
JD099B
JD089B
JD092B
JD094B
JD095C
JD096C
JD097C
JG081C
JG915A
Cables
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
HP 5130-24G-SFP-4SFP+ EI Switch (JG933A)
HP 5500 150WAC Power Supply
HP 5500 150WDC Power Supply
JD362A
JD366A
HP 5130-48G-4SFP+ EI Switch (JG934A)
HP RPS 800 Redundant Power Supply
HP RPS1600 Redundant Power System
HP RPS1600 1600W AC Power Supply
HP X290 500 V 1m RPS Cable
HP X290 1000 A JD5 Non-PoE 2m RPS Cable
JD183A
JG136A
JG137A
JD186A
JD188A
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 27
QuickSpecs
HP 5130 EI Switch Series
Accessories
HP 5130-24G-PoE+-4SFP+ (370W) EI Switch (JG936A)
HP RPS1600 Redundant Power System
HP RPS1600 1600W AC Power Supply
HP X290 1000 A JD5 2m RPS Cable
JG136A
JG137A
JD187A
HP 5130-48G-PoE+-4SFP+ (370W) EI Switch (JG937A)
HP RPS1600 Redundant Power System
HP RPS1600 1600W AC Power Supply
HP X290 1000 A JD5 2m RPS Cable
JG136A
JG137A
JD187A
To learn more, visit: www.hp.com/networking
© Copyright 2010-2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to
change without notice. The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
DA - 15058 Worldwide QuickSpecs — Version 1 — 9.29.2014
Page 28
Download PDF
Similar pages