CLT-302R/L Camera Link Translators
The CLT-302R and CLT-302L Camera Link Translators enable the use of traditional RS-422 and LVDS
digital cameras with Camera Link frame grabbers.
The “R” and “L” versions support parallel RS-422
and LVDS digital camera data, respectively. The
Vivid Engineering
Camera Link Translator
CLT-302L
CLT-302’s are extremely flexible and can convert a
wide range of cameras from parallel digital output to
POWER
LINK
LVDS CAMERA
Camera Link base configuration with up-to 24-bit
data.
Cameras with pixel clock rates as low as 2.5 MHz and as high as 85 MHz are supported. Features include RS-232
comm support, a camera signal detect indicator, and isolated DC power input.
The CLT-302’s are housed in sturdy, compact aluminum enclosures. A locking power supply plug is optional.
Features
•
Enable use of RS-422 and LVDS cameras with Camera Link frame grabbers
•
Also useful for converting parallel video from FPGA and imaging development boards
•
Camera Link “base” configuration interface, supports up-to 24-bit data
•
“R” version supports RS-422 cameras
•
“L” version supports LVDS cameras
•
2.5 MHz to 85 MHz camera pixel clock range for “L” version
•
2.5 MHz to 32 MHz camera pixel clock range for “R” version
•
RS-232 camera communication support
•
Selectable camera clock and timing signal polarities
•
Link indicator identifies an active camera connection
•
Isolated DC power input
•
Minimal data pass-through latency
•
Flow-through connector placement
•
Sturdy, compact aluminum enclosure with mounting flange
•
Multi-nation power supply included, locking power plug optional
•
3-year warrantee
Vivid Engineering
Typical Application (LVDS)
CLT-302L
Camera Link Translator
Camera Link
Frame Grabber
Vivid Engineering
POWER
LINK
CLT-302L
Camera Link Translator
Standard
Camera Link Cable
LVDS CAMERA
Camera Cable
LVDS
Camera
Specifications
Rear Panel
Feature
Camera Interface
FRAME GRABBER
MODE
4.5 - 6.0 VDC
Camera Connector
Frame Grabber Interface
Camera Link “base” configuration
Frame Grabber Conn.
26-pin MDR type
- “R” version: 2.5 - 32 MHz
- “L” version: 2.5 - 85 MHz
Rear-panel 8-position DIP switch
Video Path: 3 camera pixel clock cycles
Control signals: 20 ns max
Universal wall style w/ outlet plug set
Camera Frequency
Power Supply
Specification
- “R” version = Parallel RS-422
- “L” version = Parallel LVDS (EIA-644)
100-pin SCSI-style
Mode Selection
Latency
Power Supply
Power Plug
Cabinet Dimensions
2.1 x 5.5 mm, center-positive. Locking style optional
4.5-6.0 VDC, internally isolated
300 mA @ 5 VDC (typical)
5.28” (L) x 1.18” (H) x 6.12” (D)
Weight
13 oz
Operating Temp Range
0 to 50° C
Power Requirements
Storage Temp Range
-25 to 75° C
Relative Humidity
0 to 90%, non-condensing
Compliance
FCC Class A, ROHS, CE EN55024 pending
Ordering Information
Model
CLT-302R
Description
Camera Link Translator (RS-422)
CLT-302R-L
Camera Link Translator (RS-422, with locking power supply connector)
CLT-302R-N
Camera Link Repeater (RS-422, without power supply)
CLT-302L
Camera Link Translator (LVDS)
CLT-302L-L
Camera Link Translator (LVDS, with locking power supply connector)
CLT-302L-N
Camera Link Repeater (LVDS, without power supply)
Vivid Engineering
418 Boston Turnpike #104 ▪ Shrewsbury, MA 01545 ▪ USA
phone 508-842-0165 ▪ fax 508-842-8930
email info@vividengineering.com
web www.vividengineering.com
rev 0.4, 6/27/2011
Download PDF
Similar pages