Smart Battery Module MARS Mobile Application platform for Rechargeable Systems n i m i l e r P y r a First to market with the smart battery refence design Kit Input voltage range 5VDC to 28VDC Support for 2 batteries Support for S3 power management mode (Suspend to RAM) Modular design for fast implementation in different customized solutions Free of charge Layout and Schematic documents If it‘s www.kontron.com Embedded, it‘s Kontron. Smart Battery Module MARS Product Overview The smart Battery Module “MARS” is your Mobile Application platform for Rechargeable Systems. The main aim of the evaluation module is to give users the possibility to design their optimal applications with a mobile power supply with up to 60W and with 1 or 2 Smart Batteries. Additionally the Smart Battery Manager (SBM) “MARS” should prevent a crash of the applications, in case of electrical power outage. This assures an uninterruptible Power Supply for a certain period. Because different battery chemistries could be used, the SBM “MARS” uses smart batteries technology. So the user can also monitor the data about the charge state, battery capacity and further information. This system uses the System Management Bus (SMBus) to potentiate the user to control the important functions of smart battery standard. For providing the input voltage for the SBM “MARS” a ATX y r a Technical Information Dimensions 185 mm x 160 mm (7.28” x 6.3”) Height 16,5 mm Input voltage range 5VDC to 28VDC Applicable Smart Batteries* Supported Products Basic functions are supported by all Kontron COMs & nearly all SBCs. For key functions please have a look in the manual under Appendix D. Output voltages* 12VDC (max. 60W), 5V Standby, 5VDC (max. 42,5W), additional lines for: 3,3V, -5V, -12V Elements of the Eval-Kit SBS “MARS” plane, wire for ATX power connector (2.0 downward compatible), wire for “feature connector” (SM-Bus) Y-wire power connector (*) see manual for details n i m NiMH and NiCd up to 10S1P, e. g. 9S1P (10.8V), 10S1P (12V) LiIon and LiPo up to 4S3P: e. g. 2S2P (7.2V), 3S3P (10.8V), 4S3P (14.4V) i l e r Functional application block diagram P power supply can be used as well as a variable input voltage in the range of 5V to 28VDC. The layout of the SBM “MARS” is created as a modular design. This gives the chance to design a new SBM on a backplane in very short time only with the components that are really necessary. The output of „MARS“ can be used differently. It is acting in the same way as a ATX power supply behaves. I. e. regarding to the PS_ON signal only 5V Standby or all other voltages are available. Just as well it is possible to supply the baseboard and COM with the smart battery voltage too. So every suspend state can be realised to save power. You profit of the higher effectiveness by concurrent charging of the Smart Batteries, the automatic choice of best voltage source and the simultaneous discharge of both batteries increases battery operating time. Ordering Information Article Part.-No. Description Smart Battery Kit 18029-0000-00-0 Smart Battery Module Kit MARS Corporate Offices Europe, Middle East & Africa Kontron AG Oskar-von-Miller-Str. 1 85386 Eching/Munich Germany Tel.: +49 (0)8165/ 77 777 Fax: +49 (0)8165/ 77 219 firstname.lastname@example.org www.kontron.com North America Kontron America Corporate Office 14118 Stowe Drive Poway, CA 92064-7147 USA Tel.: +1 888 294 4558 Fax: +1 858 677 0898 email@example.com Asia Pacific Kontron Asia Inc. 4F, No. 415, Ti-Ding Blvd. Sec.2, NeiHu District Taipei Taiwan 114 Tel.: +886-2-2799-2789 Fax: +886-2-2799-7399 firstname.lastname@example.org Kontron Embedded Modules Brunnwiesenstr. 16 94469 Deggendorf Germany Tel.: +49 (0)991/ 370 24-100 Fax: +49 (0)991/ 370 24-333 email@example.com Rev# MARS # 031207PDL Copyright © 2007 Kontron Embedded Modules GmbH All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccurancies. All rights reserved. DIMM-PC®, PISA®, ETX®, ETXexpress® and X-board® are trademarks or registered trademarks of Kontron Embedded Modules GmbH. Kontron is trademark or registered trademark of Kontron AG. All other brand or product names are trademarks or registered trademarks or copyrights by their respective owners and are recognized.