NEX 607
Mini-iTX 2nd Generation Intel® Core™ Processor Family with VGA/
Dual 24-bit LVDS/ DVI-D/ HDMI/ 2x Gigabit LAN/ 10x USB
Main Features
ŒŒ 2nd generation Intel® Core™ processor family
ŒŒ Intel® QM67 chipset
ŒŒ Two 204-pin SO-DIMM socket supports up to 8 GB DDR3
1066/1333 MHz SDRAM
ŒŒ Display: VGA & DVI-D & HDMI & LVDS (2 x DF13 20-pin 18/24/36/
48-bit dual channel)
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
1x mini-PCIe, 1x PCIe x16 slot
2x Intel® Gigabit Ethernet
4x SATA
10x USB, 4-in/4-out GPIO, Mic-in , Line-out
Serial port: 3x RS232, 1x RS232/422/485 port
Support AT/ATX mode and single +12 Vdc input
Product Overview
The NEX 607 is a Mini-iTX board with 2nd generation Intel® Core™ processor family, which supports DDR3 1066/1333 memory and is equipped with
integrated graphics controller, Intel® HD Graphics 3000. It makes NEX 607 an ideal multimedia solution for large, multi-display applications. Geared
with Intel® QM67 chipset, NEX 607 also provides four SATA, four serial ports, ten USB 2.0 ports, two Gigabit Ethernet LAN port, one PCIe x16 slot, one
mini-PCIe interface for applications.
Specifications
Display
CPU Support
ŒŒ Support 2nd generation Intel® Core™ processor family
Processor
i7-2710QE
i5-2510E
i3-2330E
4
2
2
2
2.1GHz
2.5GHz
2.2GHz
1.6GHz
45W
35W
35W
35W
# of Core
Clock Speed
Max. TDP
Celeron® B810
Main Memory
ŒŒ Two 204-pin SO-DIMM socket supports up to 8 GB DDR3
1066/1333MHz SDRAM Chipset
Chipset
ŒŒ Intel® QM67 chipset
BIOS
ŒŒ
ŒŒ
ŒŒ
ŒŒ
AMI BIOS
Plug & play support
Advanced power management
Advanced configuration & power interface
On-board LAN
ŒŒ 2x Intel® PCI Express Gigabit Ethernet
ŒŒ Support Boot From LAN (PXE)
ŒŒ 2x RJ45 with LED
Industrial Mother Board
ŒŒ 2nd generation Intel® Core™ processor integrated Intel® HD Graphics
3000 engine. Intel® HD Graphics concluding high-performance
graphics and media processing is built in the processor, which is
capable of delivering sophisticated graphics for large, multi-display
applications.
ŒŒ Analog VGA interface: 1 x VGA connector
Resolution up to 2048x1536 75Hz
ŒŒ DVI interface: 1 x DVI-I connector
Resolution up to 1920x1200
ŒŒ HDMI interface: 1 x HDMI connector
ŒŒ LVDS1 interface: Dual LVDS panel, 2xDF13 20-pin LVDS connector for
internal connection
ŒŒ LVDS2 interface (option, Through SDVO w/CH7308):
Dual LVDS panel, 2x DF13 20-pin LVDS connector for internal
connection
ŒŒ CCFL interface: 2 x CCFL for LCD Panel Backlight Inverter
Audio
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Realtek ALC886 CODEC for High Definition
1x phone jack for Mic-In.
1x phone kack for Line-out .
1x 4 2.0 pitch pin header for Line-In.
1x 5 pin 2.0 pitch pin header for speak-out
Expansion
ŒŒ 1x mini-PCIe
ŒŒ 1x PCIe x16
www.nexcom.com
DDR3 CH A
Block Diagram
Sandy Bridge
Vcore
37.5 x 37.5 mm rPGA
Socket(rPGA989B)
FDI
HDA
LVDS1
LVDS BUS
LVDS
PORT:0-3
USB2.0/3.0 BUS
USB 2.0 Pin header
PORT:4-9
USB2.0 BUS
MiniPCI-E
Port 1
WG82579LM Port 6
82574L
PCI-E*1 BUS PORT
QM67
25 x 25 mm
FCBGA(Mobile only)
PCI-E *1
USB 2.0 (0~3)
Cougar Point
SDVO
PORT B
HDA BUS
DMI
LPC
SATA
VGA
ALC888
PORT D
HDMI
PORT C
DVI-D
SDVO PORT B
CH7308
LVDS BUS
SATA BUS
SATA0
SATA1
SPI
Port 5
Super I/O
IT-8783F
COM3 / COM4
(Box Header)
SATA2
SATA3
BIOS
SP338E
TPM
SLB9635TT1.2
SPI ROM
LPC BUS
LPC BUS
I/O Interface
On-board RTC
ŒŒ Serial port: 4 port
COM1: RS232 DB-9 male connector on edge I/O
COM2: RS232/422/485 DB-9 male connector on edge I/O
COM3,4: RS232 2x5/2.54mm box header
ŒŒ USB 2.0: 10 ports
4 ports edge connector
6 ports by 2.0mm pin connector
ŒŒ 8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL Level (0/5 V)
ŒŒ On-board power LED and HDD active LED pin header
ŒŒ 1x 4-pin fan connector (for CPU)
ŒŒ 1x 3-pin fan connector (for system)
ŒŒ 1x keyboard/ mouse pin header
ŒŒ On board buzzer/ SMBus2.0/ reset SW/ on & off switch button
ŒŒ On-chip RTC with battery backup
ŒŒ 1x External Li-Ion battery
Edge I/O Interface
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
LVDS2
iAMT
COM1
COM2
RS232/RS422/RS485
PCI-E x16 SLOT
SATA BUS
DMI(X4)
FDI
USB 2.0 USB 2.0/3.0
VGA BUS
DDR3 1066/1333 MHz DIMM2
DMI
Flexible
Display
Interface
VGA
DDR3 Channel B
DISPLAY DISPLAY
PORT C PORT D
VCOREG
DDR3 1066/1333 MHz DIMM1
PCIex16
IMVP 7
DDR3 Channel A
1 x DVI/ VGA connector
1x HDMI connector
2x dual stack USB and RJ45 connector
1x dual stack serial port connector
1x Mic-in and Line out phone jack
Watchdog Timer
ŒŒ Watchdog timeout can be programmable by Software from 1 second
to 255 seconds and from 1 minute to 255 minutes (Tolerance 15%
under room temperature 25°C)
Storage
ŒŒ 4x SATA port
Power Input
ŒŒ Support AT and ATX mode
Power Requirements
ŒŒ Power requirement: +12V DC input
ŒŒ One 4-pin power connector
Dimensions
ŒŒ Mini-ITX M/B form factor
ŒŒ 170mm (L) x 170mm (W)
Environment
ŒŒ Operating temperatures: 0°C to 60°C
ŒŒ Storage temperature: -20°C to 85°C
ŒŒ Relative humidity: operating 10% to 90%, non-condensing
Certifications
ŒŒ CE approval
ŒŒ FCC Class A
Ordering Information
ŒŒ NEX 607 (P/N: 10G00060700X0) RoHS Compliant
Mini-ITX , 2nd generation Intel® Core™ processor family and based
on Intel® integrated graphics engine w/ VGA/dual channel LVDS/ 10x
USB2.0/ 4x COMs/ 1x Mini-PCIe/ 1x PCIe x16/ 2x Gigabit LAN/ 4x
SATA, DC12V input
System Monitor
ŒŒ Monitoring of 4 voltages and 2 temperatures and 2 fan speed
detection
ŒŒ 4 voltages (Vcore, +12V , +3.3V , 5V)
ŒŒ 2 temperatures (CPU, System)
ŒŒ 2 fan speed detection
Industrial Mother Board
We reserve the right to change specifications and product descriptions at any time without prior notice.
Last update: 04/30/2012
Download PDF
Similar pages