PC190
Document Camera
User Manual
[Important]
To download the latest version of Quick Start
Guide, multilingual user manual, software, or
driver, etc., please visit Lumens
http://www.Mylumens.com/goto.htm
English - 0
Table of contents
Copyright Information ....................................................................................... 3
Chapter 1 Safety Instructions .......................................................................... 4
Precautions .................................................................................................. 5
FCC Warning................................................................................................ 5
EN55022 (CE Radiation) Warning ............................................................... 5
Chapter 2 Package Contents ............................................................................ 6
Chapter 3 Product Overview ............................................................................ 7
3.1
Relative position of the presenter and document ............................... 8
3.2
Recommended distance ..................................................................... 8
Chapter 4 Installation and Connections.......................................................... 9
4.1
System diagram.................................................................................. 9
4.2
Installation and setup ........................................................................ 10
4.3
Connecting to a projector or monitor ................................................ 10
4.4
Connecting to a computer and use Podium View™ software .......... 10
4.5
Connecting to a computer and projector or monitor simultaneously 11
4.6
Connecting to a computer and reading the USB Disk simultaneously11
4.7
Connecting to an Interactive Whiteboard (IWB) ............................... 12
4.8
Connecting to a TV ........................................................................... 12
4.9
Connecting to a speaker .................................................................. 13
4.10 Connecting to a Computer with RS232 ............................................ 13
4.11 Installing application software........................................................... 14
Chapter 5 Start Using ...................................................................................... 15
Chapter 6 Control Panel/Remote Control and Setting Menu ...................... 16
6.1
Functions of control panel and remote control ................................. 16
6.2
Setting Menu .................................................................................... 18
Chapter 7 Descriptions of major functions .................................................. 23
7.1
I would like to automatically adjust the image to have the best
brightness and focusing performance .............................................. 23
7.2
I would like to switch image sources ................................................ 23
English - 4
7.3
I would like to make text clearer and photos more colorful .............. 23
7.4
I would like to zoom in/out images ................................................... 24
7.5
I would like to use the auto focus ..................................................... 24
7.6
I would like to adjust the focal length................................................ 24
7.7
I would like to adjust the brightness ................................................. 24
7.8
I would like to turn on/off the lamp.................................................... 25
7.9
I would like to freeze images ............................................................ 25
7.10 I would like to capture images .......................................................... 25
7.11 I would like to record videos ............................................................. 26
7.12 I would like to view captured/recorded images ................................ 27
7.13 I would like to delete the captured/recorded images ........................ 27
7.14 I would like to automatically delete the stored images whenever it is
turned off (Auto Erase) ..................................................................... 27
7.15 I would like to enlarge a part of the image (PAN) ............................. 28
7.16 I would like to use the MASK and Spotlight function ........................ 28
7.17 I would like to play the slides (Slide Show) ...................................... 29
7.18 I would like to compare images (compare live images with stored
images (PIP)) .................................................................................... 30
7.19 I would like to reduce the image noise (Projector Type) .................. 30
7.20 I would like to resume the factory default settings (Factory Reset) . 31
7.21 I would like to change the Start Video/Off Video .............................. 31
7.22 I would like to use a USB disk .......................................................... 32
7.23 Computer-related functions .............................................................. 32
Chapter 8 Connecting to Microscope ........................................................... 36
Chapter 9 DIP Switch ...................................................................................... 37
9.1
Connecting to a projector or monitor ................................................ 37
9.2
Connecting to a TV ........................................................................... 38
Chapter 10 Troubleshooting........................................................................... 39
English - 5
Copyright Information
Copyrights © Lumens Digital Optics Inc. All rights reserved.
Lumens is a trademark that is currently being registered by Lumens Digital Optics
Inc.
Copying, reproducing or transmitting this file is not allowed if a license is not
provided by Lumens Digital Optics Inc. unless copying this file is for the purpose
of backup after purchasing this product.
In order to keep improving the product, Lumens Digital Optics Inc. hereby
reserves the right to make changes to product specifications without prior notice.
The information in this file is subject to change without prior notice.
To fully explain or describe how this product should be used, this manual may
refer to names of other products or companies, nevertheless without any intention
of infringement.
Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any
possible technological, editorial errors or omissions, nor responsible for any
incidental or related damages arising from providing this file, using, or operating
this product.
English - 3
Chapter 1 Safety Instructions
Always follow these safety instructions when setting up and using the Document
Camera:
1. Do not place Document Camera in tilted position.
2. Do not place the Document Camera on an unstable trolley, stand or table.
3. Do not use the Document Camera near water or source of heat.
4. Use attachments only as recommended.
5. Use the type of power source indicated on the Document Camera. If you are
not sure of the type of power available, consult your dealer or local electricity
company for advice.
6. Place the Document Camera on a place that it can be unplugged easily.
7. Always take the following precautions when handling the plug. Failure to do
so may result in sparks or fire.

Ensure the plug is free of dust before inserting it into a socket.

Ensure that the plug is inserted into the socket securely.
8. Do not overload wall sockets, extensions leads or multi-way plug boards as
this may cause fire or electric shock.
9. Do not place the Document Camera where the cord can be stepped on as
this may result in fraying or damage to the lead or the plug.
10. Unplug the Document Camera from the wall socket before cleaning. Use a
damp cloth for cleaning. Do not use liquid or aerosol cleaners.
11. Do not block the slots and openings in the Document Camera case. They
provide ventilation and prevent the Document Camera from overheating. Do
not place the Document Camera on a sofa, rug or other soft surface or in a
built-in installation unless proper ventilation is provided.
12. Never push objects of any kind through cabinet slots. Never allow liquid of
any kind to spill into the Document Camera.
13. Except as specifically instructed in this User Manual, do not attempt to
operate this product by yourself. Opening or removing covers may expose
you to dangerous voltages and other hazards. Refer all servicing to licensed
service personnel.
14. Unplug the Document Camera during thunderstorms or if it is not going to be
used for an extended period. Do not place the Document Camera or remote
control on top of heat-emitting equipment or heated objects such as a car, etc.
15. Unplug the Document Camera from the wall outlet and refer serving to
licensed service personnel when the following situations happen:

If the power cable or plug becomes damaged or frayed.

If liquid is spilled into it or the Document Camera has been exposed to
rain or water.
<Note> Using an incorrect battery type in the remote control may result in
breakdown. Follow your country’s instructions on how to dispose of used
batteries.
English - 4
 Precautions
Warning: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
This Document Camera has a 3-wire AC line Plug. This is a safety feature to
ensure that the plug will fit into the power outlet. Do not try to disable this safety
feature.
If the Document Camera will not be used for an extended time, unplug it from the
power socket.
Note
Risk of Electric Shock
DO NOT OPEN
Caution: To reduce the risk of electric shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to licensed service Personnel.
This symbol indicates
This symbol indicates that
that this equipment may
there are important
contain dangerous
operating and
voltage which could
maintenance instructions
cause electric shock.
in this User’s Manual with
this unit.
 FCC Warning
This Document Camera has been tested and found to comply with the limits for a
Class A or B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
 EN55022 (CE Radiation) Warning
This product is intended for use in a commercial, industrial, or educational
environment. It is not intended for residential use.
This is a Class A product. In a domestic environment it may cause radio
interference, in which case the user may be required to take adequate measures.
The typical use is in a conference room, meeting room or auditorium.
English - 5
Chapter 2 Package Contents
PC190
Quick Start Guide
4-Step Card
(For download of other
language versions, please
visit Lumens website)
Microscope Adapter
VGA Cable
USB Cable
Audio Cable
Power Cord
Remote Control
Appearance may vary
depending on
country/region
Remote Control Holder
Pouch
Accessory Pouch
English - 6
Chapter 3 Product Overview
1. Gooseneck
2. AF button
3. Lamp
4. Control panel
5. LED indicator
6. Built-in
Microphone
7. Remote sensor
8. Lens
9. LED lamp
10. DIP Switch
(Bottom)
English - 7
3.1 Relative position of the presenter and document
3.2 Recommended distance
English - 8
Chapter 4 Installation and Connections
4.1 System diagram
Projector or monitor
Computer
TV
Computer
Earphone or
speaker
USB Disk
English - 9
4.2 Installation and setup
1.
Please set up the DIP Switch Settings first. Refer to Chapter 9 DIP
Switch Settings in the PC190 User Manual.
4.3 Connecting to a projector or monitor
VGA Cable
Power Cord
Monitor or
Projector
AC Outlet
4.4 Connecting to a computer and use Podium View™
software
USB Cable
Power Cord
Projector
VGA Cable
AC Outlet
Computer
 Software can be downloaded from Lumens website.
English - 10
4.5 Connecting to a computer and projector or monitor
simultaneously
VGA Cable
VGA Cable
Power Cord
Monitor or
Projector
AC Outlet
Computer
 Press [SOURCE] button to switch the image source.
4.6 Connecting to a computer and reading the USB Disk
simultaneously
USB Disk
Power Cord
USB Cable
AC Outlet
Computer
English - 11
4.7 Connecting to an Interactive Whiteboard (IWB)
Projector
USB Cable
Power Cord
VGA Cable
USB Cable
AC Outlet
Computer
4.8 Connecting to a TV
DIP Switch
C-Video Cable
Power Cord
AC Outlet
 NTSC: USA, Canada, Mexico, Panama, Chile, Japan, Taiwan, Korea, and
Philippines
 PAL: Countries/regions not listed above.
<Note> You should unplug and reconnect the power cord, and then
restart the machine for DIP Switch Settings to take effect. Once
C-VIDEO is on, VGA OUT is not supported.
<Note> Only the live image can be displayed in C-Video Out mode.
English - 12
4.9 Connecting to a speaker
Power Cord
Earphone or
speaker
AC Outlet
4.10 Connecting to a Computer with RS232
RS232 Adapter
Power Cord
AC Outlet
Computer
 After connecting to the RS232 cable, you can use RS232 commands to
control PC190.
English - 13
4.11 Installing application software
The application software installed on the computer enables you to:
 Control the PC190.
 Capture and record images.
 Annotate the image, highlight important details and save it.
 Support the full screen function.
<Note> Please refer to Podium View™ software user manual for
installation steps and software operation.
English - 14
Chapter 5 Start Using
1. Place an object to be displayed
under the camera.
2. Turn on Power
.
3. Adjust the gooseneck and lens to
the appropriate positions.
4. Press [AUTO TUNE]
button
to optimize the image. You are
ready to teach/present.
 Each time the lens is moved,
locate the camera head and press
[FOCUS] to refocus the lens
 When using the remote control, aim at the remote sensor on the
PC190, and press the power button.
 Once PC190 is turned on, the LED on the control panel will flash a
few times and stay lit. Please contact your distributor if the LED is not
on.
English - 15
Chapter 6 Control Panel/Remote Control and
Setting Menu
6.1 Functions of control panel and remote control
<Remark> The below functions are listed alphabetically
Name
Function Descriptions
Turn on and off the Document Camera.
,,,
Move up, down, left or right to select the
needed function.
AF Button.
FOCUS
Operation
Remote control /
Control panel
Remote control /
Control panel
Either sides of
the lens
AUTO TUNE
Automatically adjust the image to have the
best brightness and focusing performance. Remote Control
BRT+/-
Manually adjust the brightness of the
image.
/
CAPTURE
/
DELETE
ENTER
Capture images to the USB disk (priority)
or internal memory.
MASK
Remote control /
Control panel
Delete images from the USB disk (priority)
Remote Control
or internal memory.
Enter/Activate functions.
/
FREEZE
Remote Control
Freeze the current image to temporarily
stay on the screen. Press again to
defreeze.
Enter Mask/Spotlight mode.
Remote control /
Control panel
Remote Control
Remote Control
MENU
Activate the setting menu/exits the menu.
PAN
Enable/Disable the Partial Enlarged mode.
Remote control /
Control panel
Remote Control
PIP
Image comparison (compares live images
Remote Control
English - 16
with captured image files).
PLAYBACK
/
Read files stored in the USB disk (priority)
Remote control /
or internal memory.
Control panel
Record motion images. Press [Record] to
record images to USB disk (priority) or
internal memory, and then press [Record]
again to stop recording.
SLIDE SHOW Show the photos or videos stored in the
USB disk (priority) or internal memory in
Slide mode.
Switch between different sources of
signals:
SOURCE
1. Live images (default).
2. Computer.
/
<Remark> This button is disabled in
C-VIDEO Out mode.
ZOOM +/Increase or decrease the image size.
RECORD
/
Remote Control
Remote Control
Remote control /
Control panel
Remote control /
Control panel
English - 17
6.2 Setting Menu
6.2.1 Setting menu
<Remark> Press [Menu] on the remote control or control panel to enter the
setting menu; The bold underlined values in the following table are defaults.
1st Level
Major Items
Display
2nd Level Minor
Items
3rd Level Adjustment
Values
Auto Tune
Activate
Lamp
1.
2.
3.
4.
Rotate
0° / 90° / 180° / 270°
Focus
0~A~Max
Brightness
0~A~Max
Mode
Normal/Slide/Film/Microsco
pe
Photo/Text
Photo/Text/Gray
Night Vision
On/Off
Digital Zoom
On/Off
Slide Show
Activate
Delay
1.
2.
3.
4.
5.
6.
Image Quality
1. High
2. Medium
3. Low
Copy To USB
Disk
Yes/No
Storage
Off
Arm lamp
Both Lamps
Head lamp
0.5 Sec
1 Sec
3 Sec
5 Sec
10 Sec
Manual
Function Descriptions
Automatically adjust the image to
have the best brightness and focusing
performance.
Use the left and right arrow keys to
switch the lamp.
<Remark> When it is set to Both
Lamps, both Arm lamp and Head
lamp are turned on.
Use the left and right arrow keys to
select the rotation angle.
Use the left and right arrow keys to
adjust focal length on an object.
Use the left and right arrow keys to
adjust the brightness.
Use the left and right arrow keys to
select the image mode.
Use the left and right arrow keys to
select the photo/text/gray mode.
Use the left and right arrow keys to
select. The night vision mode suits
with darker environment.
Use the left and right arrow keys to
turn on/off digital zoom.
Show the photos or videos stored in
the USB disk (priority) or internal
memory in Slide mode.
Use the left and right arrow keys to
select the delay time.
Select manual mode to switch images
manually.
Use the left and right arrow keys to
select the image quality for the
captured images and recorded
videos.
Use the left and right arrow keys to
select, and then press [ENTER] to
confirm to copy files from internal
memory to USB disk.
English - 18
1st Level
Major Items
2nd Level Minor
Items
3rd Level Adjustment
Values
Delete All
Yes/No
Format
Yes/No
Capture
Capture Time
Capture Interval
Setting
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
Single
Continuous shooting
Disable
1 hr
2 hr
4 hr
8 hr
24 hr
48 hr
72 hr
5 Sec
10 Sec
30 Sec
1 Min.
2 Min.
5 Min.
Auto Exposure
On/Off
Auto White
Balance
Activate
Volume
0~A~Max
Projector Type
DLP/LCD
Function Descriptions
Use the left and right arrow keys to
select, press [ENTER] to confirm the
deletion of all images from the USB
disk (priority) or internal memory.
Use the left and right arrow keys to
select, and then press [ENTER] to
format the USB disk (priority) or
internal memory.
Use the left and right arrow keys to
select the capture mode.
(Single/Continuous/Disable)
Use the left and right arrow keys to
select the capture time.
<Note> It only works when the
capture mode is set to [continuous]
Use the left and right arrow keys to
select the capture interval.
<Note> It only works when the
capture mode is set to [continuous]
Regardless of outside environment,
the machine will adjust the brightness
to the optimal condition. Use the left
and right arrow keys to select.
Regardless of outside light or color,
the machine will adjust the color to the
optimal condition; Press [ENTER] to
activate.
Use the left and right arrow keys to
adjust the volume.
Use the left and right arrow keys to
select the projector type and reduce
image noise.
English - 19
1st Level
Major Items
2nd Level Minor
Items
Language
3rd Level Adjustment
Values
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
English
繁體中文
简体中文
Deutsch
Français
Español
Русский
Nederlands
Suomi
Polski
Italiano
Português
Svenska
dansk
ČESKY
16. ‫العربية‬
17. 日本の
18. 한국의
19. ελληνικά
Advanced
Lock Down
On/Off
Auto Erase
On/Off
Preset Load
Yes/No
Preset Save
Yes/No
Factory Reset
Yes/No
Function Descriptions
English
Traditional Chinese
Simplified Chinese
German
French
Spanish
Russian
Dutch
Finnish
Polish
Italian
Portuguese
Swedish
Danish
Czech
Arabic
Japanese
Korean
Greek
Use the left and right arrow keys
in the Language option to select
the preferred language.
Use the left and right arrow keys to
turn on/off the lock down function.
You can set the password when [On]
is selected.
Use the left and right arrow keys to
enable/disable Auto Erase.
When [On] is selected, the stored
images will automatically be deleted
when the system is turned off.
Read the value of the current image
mode. Use the left and right arrow
keys to select, and then confirm by
pressing [ENTER].
Read the value of the current image
mode. Use the left and right arrow keys
to select, and then confirm by pressing
[ENTER].
Use the left and right arrow keys to
select, and then confirm by pressing
[ENTER] to restore the factory defaults.
English - 20
6.2.2 MASK Mode Setting Menu
2nd Level
Major Items
MASK Mode
3rd Level Minor
Items
4th Level Adjustment
Values
Transparency
0~4~6
Step
Large/Medium/Small
V Size
0~A~Max
H Size
0~A~Max
Spotlight
Activate
Function Descriptions
Adjust the transparency of the mask
using left and right arrow keys.
Select the step distance of the mask
using left and right arrow keys.
Adjust the vertical height of the mask
using left and right arrow keys.
Adjust the horizontal length of the
mask using left and right arrow keys.
Press [ENTER] to enter the Spotlight
mode.
6.2.3 Spotlight Mode Setting Menu
2nd Level
Major Items
Spotlight
Mode
3rd Level Minor
Items
4th Level Adjustment
Values
Transparency
0~4~6
Step
Large/Medium/Small
V Size
0~A~Max
H Size
0~A~Max
Live
Activate
Function Descriptions
Adjust the transparency of the
border in the Spotlight mode using
left and right arrow keys.
Select the step distance of the
spotlight zone using left and right
arrow keys.
Adjust the height of the spotlight
zone using left and right arrow keys.
Adjust the width of the spotlight zone
using left and right arrow keys.
Press [ENTER] to return to live image.
English - 21
6.2.4 Annotation Tools (Annotation)
After the mouse or Wacom writing pad is connected, right click the
mouse to start the tools.
< Note> When the setting menu is activated, the tools cannot be used.
<Note> For the supported Wacom models, please visit our download
center “The table model Lumens supports.”
 Icon of
Annotation
Icon
Description
/
Expand/Collapse the Annotation menu
Open/Close the Free-hand Drawing
Tool menu
 Main Menu
Select the line width
Select pen color
Clear all
Free-hand drawing tool
Draw a line
Draw a rectangle
 Free-hand
Drawing Tool
menu
Draw a polygon
Draw an ellipse
Eraser
(Clear marks of free-hand drawing
tool)
English - 22
Chapter 7 Descriptions of major functions
7.1 I would like to automatically adjust the image to have
the best brightness and focusing performance
Remote control:
1. Press [AUTO TUNE] for the optimal brightness and focal length.
Control panel:
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to select [Display].
3. Press [] to select [Auto Adjust].
4. Press [ENTER].
7.2 I would like to switch image sources
The default of image source is Live Image. Press [SOURCE]
on the
remote control or [ENTER]
on the control panel for PC190 to
switch among the following modes in turn:
1. Live images (default).
2. Computer.
7.3 I would like to make text clearer and photos more
colorful
7.3.1 Photo/Text mode descriptions
The default [Photo/Text] mode is in Photo (Photo mode). To change this
setting, please use the remote control or the control panel to enter the
Options of the Setting Menu.
 [Photo] (default): for viewing photos or text with photos, making photos
more colorful.
 [Text]: for viewing text files, making the text clearer.
 [Gray]: for viewing black & white photos which will make the grayscale
differentiation distinct.
7.3.2 Setting Photo/Text mode
To change the settings, please use the remote control or the control
panel:
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to select [Display].
English - 23
3. Press [] to select [Photo/Text]. (Please refer to 7.3.1 Photo/Text
mode descriptions to make the best choice.)
4. Press [] or [] to select the [Photo/Text/Gray].
5. Press [MENU] to exit.
7.4 I would like to zoom in/out images
1. Press [ZOOM+] on the remote control or control panel to zoom in
images.
2. Press [ZOOM-] on the remote control or control panel to zoom out
images.
7.5 I would like to use the auto focus
1. Press the [FOCUS] AF button on the right side of the lens.
7.6 I would like to adjust the focal length
Use the remote control or control panel:
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to select [Display].
3. Press [] to select [Focus].
4. Press [] or [] to adjust.
5. Press [MENU] to exit.
7.7 I would like to adjust the brightness
Remote control:
1. Press [BRT +] to make it brighter.
2. Press [BRT -] to make it darker.
Control panel:
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to select [Display].
3. Press [] to the [Brightness].
4. Press [] or [] to adjust the brightness.
5. Press [MENU] to exit.
English - 24
7.8 I would like to turn on/off the lamp
The default of the lamp is OFF. When using the remote control or control
panel:
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to select [Display].
3. Press [] to the [Lamp].
4. Press [] or [] to select [Off/Arm lamp/Both Lamps/Head lamp].
5. Press [MENU] to exit.
7.9 I would like to freeze images
1. Press [FREEZE] on the remote control to freeze the current image on
the screen. Press again to defreeze.
7.10 I would like to capture images
7.10.1 Capturing and saving images
1. Press [CAPTURE] on the remote control or control panel to
capture and save images.
 You cannot capture images when the capture mode is set to
[Disable]. If it is set to [Continuous], you can capture images
continuously. Press [Capture] to start capturing continuously,
or press [Capture] again to exit.
 To change the quality of captured images, please refer to 7.10.2
Setting the quality of captured images.
 To change the settings of captured images, please refer to 7.10.3
Setting continuous capture.
7.10.2 Setting the quality of captured images
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [Menu] to exit.
English - 25
7.10.3 Setting continuous capture
1. Press [MENU] on the remote control or control panel to enter
the setting menu.
2. Press [] or [] to the [Setting] menu.
3. Press [] to find [Capture].
4. Press [] or [] to select [continuous].
5. Press [] to find [Capture Time]; Press [] or [] to set capture
time.
6. Press [] to find [Capture Interval]; Press [] or [] to set interval
time.
7. Press [MENU] to exit.
7.11 I would like to record videos
7.11.1 Recording motion images
<Remark> You may not be able to capture or record images
when [Capture] mode is set to [Disable].
1. Press [RECORD] on the remote control to start recording videos.
2. Record sounds with the built-in microphone of the control panel.
3. Press [RECORD] again to stop recording.
7.11.2 Setting the quality of captured images
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [Menu] to exit.
7.11.3 Playing videos
 For playing videos, please refer to 7.12 I would like to view
captured/recorded images.
English - 26
7.12 I would like to view captured/recorded images
1. Press [PLAYBACK] on the remote control or control panel to display
thumbnails of all stored files.
2. Press [] or [] or [] or [] to select the thumbnail you want to play.
3. Press [ENTER] for full-screen play.
4. Press [] or [] to select different video and audio files.
5. Press [] or [] to adjust the volume of the video.
6. Press [MENU] to exit.
<Note> An external speaker must be connected to AUDIO OUT to play
sound.
7.13 I would like to delete the captured/recorded images
Remote control:
1. Press [PLAYBACK] to show the thumbnails of all stored files.
2. Press [] or [] or [] or [] to select the file you want to delete.
3. Pressing [DELETE] will open a [Delete File] window.
4. Press [] or [] to select [Yes].
5. Press [ENTER] to delete the selected file.
6. Press [MENU] to exit.
7.14 I would like to automatically delete the stored images
whenever it is turned off (Auto Erase)
Use the remote control or control panel:
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to the [Advance] menu.
3. Press [] or [] to [Auto Erase].
4. Press [] or [] to select [On].
5. Press [MENU] to exit.
English - 27
7.15 I would like to enlarge a part of the image (PAN)
Use Remote control:
1. Press [PAN] to enter the Partial Enlarged mode.
2. Press [] or [] or [] or [] to move and view the partial enlarged
images.
3. Press [PAN] to exit the partial enlarged mode.
7.16 I would like to use the MASK and Spotlight function
7.16.1 I would like to use the MASK or Spotlight mode
Use Remote control:
1. Press [MASK] to enter the Mask mode, and press [] or [] or []
or [] to move the mask position.
2. Press [MASK] again to enter the Spotlight mode, and press [] or
[] or [] or [] to move the zone position.
3. Press [MASK] again to exit and return to the live image screen.
Live image
MASK mode
Spotlight mode
7.16.2 I would like to set the size of Mask/Spotlight function
In Mask/Spotlight mode, use the remote control:
1. Press [MENU] to enter the image OSD menu.
2. Press [] or [] to select the item to be modified
[Transparency/Step/V Size/H Size]. (For details, please refer to
6.2 Setting Menu.)
3. Press [] or [] to perform the modification.
4. Press [MENU] to exit the image OSD menu and return to the
Mask mode.
English - 28
7.17 I would like to play the slides (Slide Show)
7.17.1 Setting delay time
1. Press [MENU] on the remote control or control panel to enter
the setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Delay].
4. Press [] or [] to select image switch mode between [0.5 Sec/1
Sec/3 Sec/5 Sec/10 Sec/Manual].
5. Press [MENU] to exit.
7.17.2 Activating/Pausing/Stopping the slide show
<Note> Upper Limit: The maximum size of single photo is 7 MB.
Remote control:
1. Press [SLIDE SHOW] to start playing.
2. Press [ENTER] to pause playing.
3. Press [ENTER] again to continue playing.
4. Press [SLIDE SHOW] again to stop playing.
Control panel:
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Slide Show].
4. Press [ENTER] to play.
5. Press [ENTER] to pause playing.
6. Press [ENTER] again to continue playing.
7. To stop playing, repeat Steps 1 and 4.
English - 29
7.18 I would like to compare images (compare live images
with stored images (PIP))
This function will compare and contrast a live image with a stored image.
C1
C2
C3
C4
C5
C6
C7
Live image
Stored image
Remote control:
1. Press [PIP] to enter the photo selection screen.
2. Press [] or [] or [] or [] to select the file to be compared.
3. Press [ENTER] to activate image comparison.
4. Press [] or [] or [] or [] to move the live image.
5. Press [PLAYBACK] to return to image thumbnails and compare it with
other images.
6. Press [MENU] to exit.
7.19 I would like to reduce the image noise (Projector
Type)
1. This function enables Document Camera to automatically clear image
noise. The noise is especially obvious when Document Camera is
connected to a DLP projector. You can set the DLP projector to improve
the image quality.
2. If there is special noise when VGA out is connected, please set DLP
option to improve the image quality.
English - 30
2.1 Press [MENU] on the remote control or control panel to enter
the setting menu.
2.2 Press [] or [] to the [Setting] menu.
2.3 Press [] to enter [Projector Type].
2.4 Press [] or [] to select [LCD/DLP].
2.5 Press [MENU] to exit.
7.20 I would like to resume the factory default settings
(Factory Reset)
7.20.1 Using OSD menu
1. Press [MENU] on the remote control or control panel to enter
the setting menu.
2. Press [] or [] to select [Advance] menu.
3. Press [] to select [Factory Reset].
4. Press [] or [] to select [Yes].
5. Press [ENTER] to activate.
7.20.2 Use Compound Key
1. Use the control panel, and press [ENTER] + [MENU]
simultaneously to restore the initial value.
<Note> Before using the compound keys, please remove all
VGA-IN devices.
7.21 I would like to change the Start Video/Off Video
<Note> The file size of the Start Video/Off Video should be less than
5MB and the AVI file in H.264 compression format should be used.
7.21.1 Changing the Start Video
1. Press [ENTER] + [] on the control panel to enter Service Menu.
2. Press [] or[] to select [Pwr On] menu.
3. Press [] to [Image Select] and press [ENTER] to read the saved file.
4. Press [] or [] or [] or [] to select the picture file and press
[ENTER] to apply the change.
5. Press [] to [Start Video Select] and press [] or [] to select [Default
Video/ Customer Video].
English - 31
6. Press [] to [Logo Show time] and press [] or [] to modify the
playback time.
7. Press [MENU] to exit.
7.21.2 Changing the Off Video
1. Press [ENTER] + [] on the control panel to enter Service Menu.
2. Press [] or [] to select [Pwr Off] menu.
3. Press [] to [Image Select] and press [ENTER] to read the saved file.
4. Press [] or [] or [] or [] to select the picture file and press
[ENTER] to apply the change.
5. Press [] to [Off Video Select] and press [] or [] to select [Default
Video/ Customer Video].
6. Press [MENU] to exit.
7.22 I would like to use a USB disk
1. Insert the USB disk and a [Copy To USB Disk] dialog box will appear,
and you are asked whether to copy files from PC190 to the USB disk.
 Press [] or [] on the remote control or control panel to select.
Copy To USB Disk
Yes
No
7.23 Computer-related functions
Ensure that the USB cable is connected and the drivers are installed before
using the computer-related functions. Refer to Chapter 4 Installation and
Connections in this User Manual.
7.23.1 I would like to insert a photo in MS-Paint
1. Click [File/From Scanner or Camera] in MS-Paint as shown in the
bottom left figure.
English - 32
2. Click [Get Picture] will capture the photos of live images and insert
the files in use shown as top right figure.
<Remark> Support Windows XP Operation System only.
7.23.2 I would like to insert a photo in MS-Word
<Remark> For Windows Office 2003 or later versions, please
use the function with OneNote.
1. Click [Insert/Image/From Scanner or Camera] in MS-Word.
2. Select [Lumens Document] and click [Custom Insert].
<Remark> For Windows XP, please set by system name (USB
video device)
Lumens Document
3. Click [Get Picture]. It will capture the photo of live image.
English - 33
7.23.3 I would like to change the setting of the PC190 and then
capture a photo in MS-Word
<Remark> For Windows Office 2003 or later versions, please
use the function with OneNote.
1. Click [Insert/Image/From Scanner or Camera] in MS-Word.
2. Select [Lumens Document] and click [Custom Insert].
<Remark> For Windows XP, please set by system name (USB
video device)
Lumens Document
3. A window showing a live image (see below) will be displayed.
English - 34
4. Press [Setting]: To control the PC190 via the Camera Settings
interface. The operating procedure is the same with the remote
control and control panel of the PC190. Refer to Chapter 6 Control
Panel/Remote Control and Setting Menu.
5. Press [Capture] to capture images in MS-Word.
6. Press [Cancel] to exit.
7.23.4 I would like to set the PC190 as a PC Camera
<Remark> For Windows XP, please set by system name (USB
video device)
Open [My Computer] and click [Lumens Document] to open a live
image.
Lumens
Document
English - 35
Chapter 8 Connecting to Microscope
1 Mount the microscope adapter onto the microscope
<Note> Please choose an appropriate microscope adapter. Microscope
adapter accessories are applicable to eyepieces of Ø 28 mm, Ø 31 mm, Ø 33
mm, and Ø 34 mm.
2 The lens of PC190 connects with the microscope adapter
If the eyepiece is Ø 33 mm or Ø 34
mm, only one Lumens
microscope adapter is needed.
If the eyepiece is Ø 28 mm or Ø 31 mm,
you need two microscope adapters.
(1. The Lumens microscope adapter.
2. The microscope adapter suitable
for the eyepiece size Ø 28 mm or Ø 31
mm.)
3 Select the [Microscope] mode
3.1. When using the control panel or remote control
3.1.1. Press [MENU] to enter the setting menu.
3.1.2. Press [] or [] to the [Display].
3.1.3. Press [] to select [Mode].
3.1.4. Press [] or [] to the [Microscope].
4 If the image is not clear
4.1. Please adjust the focus of microscope.
4.2. Please press the [FOCUS] button on either side of the PC190 lens to
activate the auto focus.
5 Digital Zoom
5.1. Press [MENU] to enter the setting menu.
5.2. Press [] or [] to the [Display].
5.3. Press [] to select [Digital Zoom].
5.4. Press [] or [] to the [On].
English - 36
Chapter 9 DIP Switch
<Note> You should unplug and reconnect the power cord, and then restart
the PC190 for all DIP Switch Settings to take effect.
9.1 Connecting to a projector or monitor
9.1.1 XGA output (default values):
9.1.2 SXGA output
9.1.3 WXGA output
English - 37
9.2 Connecting to a TV
9.2.1 NTSC: USA, Taiwan, Panama, Philippines, Canada, Chile, Japan,
Korea, and Mexico
9.2.2 PAL: Countries/regions not listed above
<Remark> Once C-VIDEO is on, VGA OUT is not supported.
English - 38
Chapter 10 Troubleshooting
This chapter describes problems you may encounter while using PC190. If you
have questions, please refer to related chapters and follow all the suggested
solutions. If the problem still occurred, please contact our distributors or service
center..
No.
1
2
Problems
Boot without
power signal
There is no
image output
from PC190
3
Unable to focus
4
The image is
incomplete
5
Lumens
Document,
Podium View™
and other
applications
cannot be used
simultaneously
When the unit is
turned on, the
auxiliary
floodlight do
not light.
PC190 fails to
store images or
6
7
Solutions
Make sure you have plugged in the power cord.
1. Check the power.
2. Check all cable connections. Refer to Chapter 4
Installation and Connections in this manual.
3. Check the [Source], refer to 7.2 I would like to
switch image sources of Chapter 7 Descriptions
of major functions.
4. Check the settings for the source of the projector.
For the appropriate input selection of the projector,
refer to the projectors user manual.
5. Check if DIP Switch is properly set. Refer to Chapter
9 DIP Switch Settings for related settings.
Probably the document is too close. Press [ZOOM -] on
the remote control or control panel. Or pull away the
lens from the document to increase the distance, and
then press the [FOCUS] button on the right side of the
lens.
Check the Auto Image setting of your projector. Please
refer to the user manual of the projector or check for the
DIP SWITCH settings.
Lumens Document, Podium View™ and other
applications cannot be executed simultaneously. Only
one application can be executed at a time. Please close
the currently running applications and then execute the
application to be used.
Please make sure the arm lamp is set to “OFF”. For the
switch-on or -off of arm lamp, please refer to 7.8 I would
like to turn on/off the lamp (LAMP) of Chapter 7
Descriptions of major functions.
1. Check to see if the stored data have reached the
maximum size of the USB device (priority) or internal
English - 39
react.
8
9
10
The images
outputted from
PC190 are too
bright, dark or
vague.
Unable to record
images
The operating
steps in the
manual are not
applicable to the
machine.
memory.
2. Please make sure if the Capture function is set to
Continuous mode or the time for capture is set to be
long. For the related setting, refer to 7.10 I would
like to capture images of Chapter 7 Descriptions
of major functions.
Press [AUTO TUNE] to automatically adjust to the
optimal brightness and focal length.
1. Check to see if the stored data have reached the
maximum size of the USB disk (priority) or internal
memory.
2. Please confirm the rotation angle. You may not able
to record when the image is rotated by 90°/270°.
1
2
The operating steps in the manual may be not applicable
to the machine due to improvement in functions.Check to
see if the Firmware version of your machine is up-to-date.
Please go to Lumens official website to check whether the
latest version is available for update.
http://www.Mylumens.com/goto.htm
The steps to check the FW version are as below:
2.1 Press [MENU] on the remote control or control panel
to enter the setting menu.
2.2 Press [] or [] to select [Advanced] menu.
Firmware
version
Master:DHM025
Slave:DHO010
If you are not sure whether it is the latest version, please
consult your dealer for advice.
11
How to release
the locked
machine
12
Only video
http://www.Mylumens.com/en/Request_form.php
1. Press [Menu] on Remote Control or Control Panel
to enter the setting menu.
2. Press [] or [] to enter the [Advanced] menu.
3. Press [] to [Lock Down].
4. Press [] or [] to choose [Off], and cancel the
function of setting power-on password.
USB Audio is not supported in PC190. Therefore, the
English - 40
signal is
produced from
the video
recorded using
Lumens
software. No
audio output.
built-in microphone cannot work in a computer. To
record the sound, please use an external microphone
for a desktop or a microphone built in a notebook.
English - 41
Download PDF
Similar pages