R. D. 3 -
GREENSBURG, PENNA. 15601
Phone: (412) 837-4762
Industrial Division
Communications Division
Consulting. Project Engineering
Appalaal_ se__
P.O. _ . . ,
Box 378·E
......
ApE114, IN6
_ _.,IIlC.
~
........tau...
aau. .,.wille. Vbgiad aatol
... G.I.. Man'iaoaa
TlIak ,.. ~ the opputalU ". taU . . ,be KlIIIg ..ad10 .cpai}aeD't, . .
Us,. . _ ,... 11Oc:1 _ _• • •laD 1.q8i...." 81.."
~ ?
1986.
h'lce .....'1_ ~ '&.be t _ _ _ _z. rd.Dg Model UllSU2C 14 . . . .1 ponable
lao"'" .flAlx aDt. . . . _l...sal .pe..../lliao.,a.- _cto.,
s.".'. c.de
aalUp1e c.IIt . . . . . ~, ...10.1", - _ . sea -ltW ...
iD'.D&1 ke~boud/ u:D•
CIa".
'IOt.S."..,.
"DUd.
........... Optiona •
..... CI811 6" Aat. . . . wlt.b BIte CG• •"toz
La .12 IIIC CODvualaa U' ( .......lled)
L.U. 0105 8.,.e Dickel - cadl_ l'ecUrge.le batt.Q
_".17
LAA 0106 .paze alkaUN 4lapoa_lAI
LUG.to DMk Cla.Ugu CODe a.K . . .1 ...te)
Lt8 0356 ODe IIouI' dual ••,. veblo1e
""'ga
$
10.00
0.00
65.00 19.10 160.00 195.00 LM OMO hUt. . . . . . . . . .ovJ.u chugez
3O.GO _i1 COI'd
.... 0116 Dez.xe IeatllN' e....,... oaa. (.tl'. luge _,• .,.)
a.oo I.M
oaoo ...-. 1110 .tII
LAA 0611 hU cevu ~ cu~ cu.
LfH U41C 14 ___I
All
ponable ....0
IWi. . In. . . dla_t.
I.W_ lIlae1aan
11M..." 1Uect~..
M.OO
8.00 890.00
.):-
..'.:.,
.... "'."
:.-: ~,:~[:~!~};:~~~~~:~~';>~f~~·~·,", "
",.~>:.,;,
",:, ,-;:•
.:r.-~.;\~.;:
VEHICULAR
CHARGERS
) SPECIFICATIONS
LAA0340
LAB 0356
'"'="&11
The LAB 0356 Vehicular Charger gives
King portable radios mobile performance
while offering one hour recharge and dead
battery operation. An external speaker with
five watts of audio output is included for
use in high noise environments. The
mobile mic included with the system per­
mits full operation of the radio while it is
secured in the charging base. The
improved performance of a mobile antenna
can be achieved through a PL259 connec­
tor on the charging base rear panel. Any
King LPH/LPU series portable drops into
the charger and is secured by spring
loaded roilers which retain the unit during
vehicle motion. All connections including
RF, are securely .made through one press­
in side connector. A rugged two-piece
mounting bracket allows easy mounting to
dash or hump. The charger is reverse
polarity protected. The LAA 0361 includes:
1 charging base with mounting bracket, 12
VDC power cord, 1 external speaker with
mounting bracket and 1 mobile
microphone with hang-up clip.
Size: 5.0 x 5.0 x 2.5 inches.
Weight: 20 oz.
Input: 13.5-17 VDC.
.
Minimum Charging Input Voltage:
12.5 VDC.
Minimum Radio Operation Input: 8.5 VDC.
Power Cord: 2 Wire (red/black), Red with
in-line fuse, Length 10 feet, 2 Pin
Molex Connector.
Cord: Coil Cord: Urethane jacket maximum
15" retracted, minimum 90"
extended, 6 Pin Mini Modular
Connector with boot.
Size: 2.25 x 2.9 x 1.2 inches.
Weight: 6 oz.
Charge Sase
Connectors: External Antenna-PL259.
DC Input-2 Pin Molex.
.
Mic Output-6 Pin Mini Modular.
Audio Output-2.5 mm Sub­
miniature Jack.
Size: 8.5 x 3.75 x 3.5 inches.
Weight: 3 lb. 2 oz.
External Speaker
Input: 5 Watts. Impedance: 4 Ohms. Cord: 2 Wire, Length 8.5 feet, 2.5 mm Subminiature Plug.
Microphone
reti",l,'
The LAA 0340 vehicular charger is a com­
pact charging base capable of charging
King rechargeable battery packs in 14
hours or less. King LPH/LPU radios are
secured in the base with spring loaded
rollers. A rugged adjustable mounting
bracket attaches the base securely to dash
or hump mount.
Input: 12-18 VDC. Power Cord: 2 wire (redlblack), Red with in-line fuse, Length 10 feet. KING'~
King Radio Corporation, Mobile Communications Division. P.O. Box 3347, Lawrence. Kansas 66046·0347, (913) 842-0402.
LM 1020
) SPECIFICATIONS
CHARGERS lAA 0300
'fi!',lm,)
The LAA 0300 is a compact desk top
charger that will recharge King nickel
cadmium battery packs (LAA 0100 and
LAA 0105) in 14 hours or less. Its compact
size makes it ideal to slip into a briefcase
or tool kit for travel. The charger will accept
a battery pack attached to the radio or
alone. The LAA 0300 consists of a charger
housing connected to a wall transformer
by a Iwo conductor cable. An LED indi­
cator confirms proper contact with the
battery pack.
Input: 121 VAC ± 10%, 60 Hz.
Size: Charger: 3.35 x 3.40 x 2.35 inches.
Transformer: 1.50 x 1.60 x 2.15 inches.
Weight: 1 lb.
Power Cord: Two conductor from trans­
former to charging base, 78/1 length..
12il:I:1
The LAA 0310 or LAA 0320 will recharge
King nickel cadmium battery packs (LAA
0100, LAA 0105) to 90% of the battery
capacity in an hour or less. Once the
lAA 0310
lAA 0320
charging function is complete, the unit will
automatically switch to a trickle rale 10
maintain the charge without damaging the
battery pack. The charger will accept a bat­
tery pack attached to the radio or alone.
Red and green LED indicators confirm
proper contact with the battery and show
the change rate.
Input: LAA 0310-121 VAC ± 10%,
50/60 Hz.
LAA 0320-242 VAC ± 10%,
50/60 Hz.
Size: 7.0 x 3.75 x 3.5 inches. Weight: 3 Ibs. 2 oz. Power Cord: Grounded, 3 Conductor Cable, 78" length.
The LAA 0360 and LAA 0370 are five unit
chargers capable of simultaneously charg­
ing five King nickel cadmium batteries to
90% capacity in an hour or less. Once the
charging function is complete, each recep­
tacle can independently switch to a trickle
rate maintaining the charge without
damaging the battery pack. Red and green
LED's at each receptacle confirm proper
contact with the battery pack and indicate
charge rate. The charger will accept bat­
teries attached to the radio or alone. The
rugged frame will desk or wall mount and
will fit in a 19/1 rack mount configuration.
Input: LAA 0360-121 VAC ± 10%, 50/60 Hz. LAA 0370-242 VAC ± 10%, 50/60 Hz. Size: 18.5 x 7.25 x 5.5 inches. Weight: 15 Ibs. 8 oz. Power Cord: Grounded, 3 Conductor Cable, 78/1 length.
',!I.,'II
(Not Pictured)
The LAA 0311 is a conversion kit used to
convert the LAA 0310 from 121 VAC to 242
VAC input. Proper labels and voltage tags
are included.
t,!I"td.
(Not Pictured)
The LAA 0361 is a conversion kit used to
convert the LAA 0360 from 121 VAC to 242
VAC input. Proper labels and voltage tags
are included.
King Radio Corporation, Mobile Communications Division, P.O. Box 3347, Lawrence, Kansas 66046-0347, (913) 842·0402.
)
SPEAKER MICROPHONE
PROGRAMMING PRODUCTS
SPECIFICATIONS
LAA0701
LAA0200
LAA0700
LAA0220
'tt;·,ti'z,)
The LAA 0200 is a speaker microphone designed to allow use of the portable radio while it remains attached to the belt. The compact lightweight mic is attached by a clip to: collar, lapel, pocket or strap. The clip swivels 360 0 allowing the mic to be secured at various angles. A hillo switch varies the audio output of the speaker. The coil cord reaches 72/1 extended and mates with any King LPH/LPU series radio via a plug-in side connector with security screw. Size: 2.9 x 2.0 x 1.0 inches. Weight: 6 oz. Coil Cord: Maximum 12/1 retracted, minimum 72/1 extended, four
conductors and shield urethane
jacket.
Speaker: Input: 500 mW, 300 to 3000 Hz. Impedance: 8 Ohms. Mic: Impedance: 3000 Ohms. Sensitivity: - 63dB ± 3dB 300 to 3000 Hz. Frequency Response: - OdB + 3dB 300 to 3000 Hz. Connector: RF jack, audio jack, 6 pin data
1/0. Includes thread-in security screw.
Switch: Hillow audio SPST.
wli"
"4'i'
The LAA 0220 is an earphone for use with
King LPH/LPU series portable radios. This
I
earphone has replaceable ear tip and ear
loop and a detachable cord.
Impedance: 2000 Ohms ± 20% @ 1000 Hz.
Sensitivity: 120dB ± 5dB @ 250 Hz.
Connector: 2.5 mm Right Angle Plug.
Cable: 2 Conductor, 60" Length.
'tt.:I'ld,t" (Not Pictured)
The LAA 0600 is a tool kit that facilitates
service for King LPH/LPU series portable
radios. The tool kit includes: (1) an antenna
adaptor key and spanner tool to fit the
antenna and side connectors; (2) a 6 pin
accessory test cable providing access to
mlc audio, PTT, and monitor functions; (3)
an RF cable assembly providing access
to the RF port through the 3.5 mm side
connector jack; (4) an audio cable
assembly that mates with the 2.5 mm
side connector output and (5) a battery
eliminator allowing the radio to be operated
from an AC power supply.
't&l,n,t.)
The LAA 0700 is a cloning cable used to
transfer the programming information in
one King radio to another King radio. The
cable allows cloning from portable to
portable, portable to mobile, mobile to
portable or mobile to mobile if the radios
are in the same band. Any King radio with
a keyboard that is capable of programming
can be used to clone any other King radios.
Radios without internal programming
capability cannot clone other radios but
can accept programming information. 14
channel radios can clone 2 channel radios,
but only the information for channel 1 and
2 will be downloaded.
Plug Size: 1 x 1.9 x 1.2 inches.
Coil Cord: Urethane jacket maximum 12"
retracted, minimum 72/1 extended.
'!tl,ti,j,
The LAA 0701 is a programming pi that
fits into the side connector of LP
U
portable radios. This plug is used to access
the programming mode for keyboard radios
capable of internal programming.
Size: 1 x 1.9 x 1.2 inches.
'ttJ.,n'~1(Not Pictured)
The LAA 0705 is an RS232 interface allow­
ing a computer to store programming infor­
mation and clone King radios. This is ideal
for dealers and large system users who
need to keep files of programming informa­
tion that is easily accessible to put new
radios in service or to change the program­
ming in a system. The LAA 0705 includes
an RS232 interface plug and King
LPH/LPU side connector plug connected
by a coil cord. Also included is a list of the
appropriate RS232 codes required to
access the radio memory.
King Radio Corporation, Mobile Communications Division, P.O. Box 3347, Lawrence, Kansas 66046·0347, (913) 842·0402.
LM 1023
CARRY CASES
ACCESSORIES
) SPECIFICATIONS
LAA 0400
LAB 0431
LAB 0436
)
LAB 0406
ltitl,!II'
)
The LAB 0431 and LAB 0436 are deluxe
leather carrying cases made from high
grade top shoulder leather. A unique
holster clip traps the battery pack in the
bottom of the case yielding maximum
access to the radio top controls. Both
cases come with a detachable swivel belt
loop that allows easy removal of the radio
and case from the belt. When attached, the
radio and case swivels for comfort. The
belt loop will accept up to 2 3.4" wide belts.
The LAB 0431 Is used for radios with stan·
dard sized battery packs (LAA 0400). The
LAB 0436 is used for radios with large bat·
tery packs (LAA 0105, LAA 0106). Both
.
cases include "0" rings for shoulder strap
attachment.
The LAA 0411 is a leather full cover that
can be attached to the LAB 0431 and LAB
0436 leather carry cases.
Ititl,!IU
The LAA 0413 is a leather shoulder strap
that can be attached to "0" rings found on
the LAB 0431 and LAB 0436 leather carry
cases. The shoulder strap is adjustable
from 35 to 60 inches.
I!!I"".
(Not Pictured)
The LAA 0414 is a spare leather belt loop
that mates with the swivel stud found on
LAB 0431 and LAB 0436 leather cases.
Ititl,!t.:.,
The LAA 0400 belt clip fastens directly to
the rear heat sink or mounting surface of
LPH/LPU series portable radios with two
screws. The stainless steel clip accepts up
to 23.4" belts and features a reverse bend
keeping the radio secured on a belt. The
LAA 0400 includes: 1 belt clip, 2 mounting
screws. Size: 1.9 x 3.2 x 0.3 inches.
1,,=I,lt'0
The LAB 0406 is a detachable swivel belt
loop. A swivel stud mounts to the rear heat
sink or mounting surface of LPH/LPU
series radios with two machine screws.
This swivel stud fits into a Clip on the
leather belt loop allowing the radio to be
easily detached from the belt by a 1800
rotation. When attached, the radio swivels
for maximum comfort. The belt loop
accepts up to 23/4" wide belts. The LAB
0406 includes: 1 swivel stud, 2 mounting
screws and 1 belt loop with Clip.
""+4 KING'· King Radio Corporation, Mobile Communications Division. P.O. Box 3347. Lawrence. Kansas 66046-0347, (913) 842-0402. L.M 1019
Download PDF
Similar pages