Cisco 2800 Series Integrated Services Routers

Data Sheet
Cisco 2800 Series Integrated Services Routers
®
Cisco Systems , Inc. is redefining best-in-class enterprise and small- to- midsize
business routing with a new line of integrated services routers that are optimized for the
secure, wire-speed delivery of concurrent data, voice, video, and wireless services.
®
Founded on 20 years of leadership and innovation, the Cisco 2800 Series of integrated
services routers (refer to Figure 1) intelligently embed data, security, voice, and wireless
services into a single, resilient system for fast, scalable delivery of mission-critical
business applications. The unique integrated systems architecture of the Cisco 2800
Series delivers maximum business agility and investment protection.
Figure 1.
Cisco 2800 Series
Product Overview
The Cisco 2800 Series comprises four platforms (refer to Figure 1): the Cisco 2801, the Cisco
2811, the Cisco 2821, and the Cisco 2851. The Cisco 2800 Series provides significant additional
value compared to prior generations of Cisco routers at similar price points by offering up to a
fivefold performance improvement, up to a tenfold increase in security and voice performance,
embedded service options, and dramatically increased slot performance and density while
maintaining support for most of the more than 90 existing modules that are available today for
the Cisco 1700, Cisco 2600, and Cisco 3700 Series.
The Cisco 2800 Series features the ability to deliver multiple high-quality simultaneous services
at wire speed up to multiple T1/E1/xDSL connections. The routers offer embedded encryption
acceleration and on the motherboard voice digital-signal-processor (DSP) slots; intrusion
prevention system (IPS) and firewall functions; optional integrated call processing and voice mail
support; high-density interfaces for a wide range of wired and wireless connectivity requirements;
and sufficient performance and slot density for future network expansion requirements and
advanced applications.
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 18
Data Sheet
Secure Network Connectivity for Data, Voice, and Video
Security has become a fundamental building block of any network. Routers play an important role
in any network defense strategy because security needs to be embedded throughout the network.
The Cisco 2800 Series features advanced, integrated, end-to-end security for the delivery of
®
converged services and applications. With the Cisco IOS Software Advanced Security feature
set, the Cisco 2800 provides a robust array of common security features such as a Cisco IOS
Software Firewall, intrusion prevention, IPSec VPN, Secure Socket Layer (SSL) VPN, advanced
application inspection and control, Secure Shell (SSH) Protocol Version 2.0, and Simple Network
Management Protocol (SNMPv3) in one secure solution set. Additionally, by integrating security
functions directly into the router itself, Cisco can provide unique intelligent security solutions other
security devices cannot, such as network admissions control (NAC) for antivirus defense; Voice
and Video Enabled VPN (V3PN) for quality-of-service (QoS) enforcement when combining voice,
video, and VPN; and Dynamic Multipoint VPN (DMVPN), Group Encrypted Transport (GET) VPN,
and Easy VPN for enabling more scalable and manageable VPN networks. In addition, Cisco
offers a range of security acceleration hardware such as the intrusion-prevention network modules
and advanced integration modules (AIM) for encryption, making the Cisco 2800 Series the
industry's most robust and adaptable security solution available for branch offices. As Figure 2
demonstrates, using a Cisco 2800 Series uniquely enables customers to deliver concurrent,
mission-critical data, voice, and video applications with integrated, end-to-end security at wirespeed performance.
Converged IP Communications
As shown in Figure 2, the Cisco 2800 Series can meet the IP Communications needs of small-tomedium sized business and enterprise branch offices while concurrently delivering an industryleading level of security within a single routing platform. Cisco CallManager Express (CME) is
an optional solution embedded in Cisco IOS Software that provides call processing for Cisco IP
phones, including wired and cordless WLAN phones. This solution is for customers with dataconnectivity requirements interested in deploying a converged IP telephony solution for up to 96 IP
phones. With the Cisco 2800 Series, customers can securely deploy data, voice, and IP telephony
on a single platform for their small-to-medium sized branch offices, helping them to streamline
their operations and lower their network costs. The Cisco 2800 Series with optional Cisco CME
support offers a core set of phone features that customers require for their everyday business
needs and takes advantage of the wide array of voice capabilities that are embedded in the Cisco
2800 Series (as shown in Table 1) together with optional features available in Cisco IOS Software
to provide a robust IP telephony offering for the small to medium-sized branch-office environment.
Wireless Services
The Cisco 2800 Series can provide a complete wireless solution for branch offices, small/medium
sized businesses, and Wi-Fi hotspots. Wireless services enable greater mobility for employees,
partners, and customers, resulting in increased productivity. The Cisco 2800 Series supports an
integrated access point for wireless LAN connectivity, Wi-Fi Hotspot services for public access,
wireless infrastructure services for cordless WLAN telephony and for larger sites, and land mobile
radio over IP for radio users.
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 18
Data Sheet
Integrated Services
Figure 2 also highlights the fact that with the unique integrated services architecture of the Cisco
2800 Series, customers can now securely deploy IP Communications with traditional IP routing
while leaving interface and module slots available for additional advanced services. With the
optional integration of a wide array of services modules, the Cisco 2800 Series offers the ability to
easily integrate the functions of standalone network appliances and components into the Cisco
2800 Series chassis itself. Many of these modules, such as the Cisco Network Analysis Module,
Cisco Voice Mail Module, Cisco Intrusion Detection Module, Wide Area Application Services
Module, and Cisco Content Engine Module, have embedded processors and hard drives that
allow them to run largely independently of the router while allowing management from a single
management interface. This flexibility greatly expands the potential applications of the Cisco 2800
Series beyond traditional routing while still maintaining the benefits of integration. These benefits
include ease of management, lower solution costs (CAPEX and OPEX), and increased speed of
deployment.
Applications
Secure Network Connectivity with Converged IP Communications
Figure 2.
Secure Network Connectivity with Converged IP Communications
Architecture—Features and Benefits
The Cisco 2800 Series architecture has been designed specifically to meet the expanding
requirements of enterprise branch offices and small-to-medium-sized businesses for today's and
future applications. The Cisco 2800 Series provides the broadest range of connectivity options in
the industry combined with leading-edge availability and reliability features. In addition, Cisco IOS
Software provides support for a complete suite of transport protocols, Quality-of-Service (QoS)
tools, and advanced security and voice applications for wired and wireless deployments.
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 18
Data Sheet
Table 1.
Architecture—Features and Benefits
Feature
Benefit
Modular Architecture
A wide variety of LAN and WAN options are available. Network interfaces can be
upgraded in the field to accommodate future technologies.
Several types of slots are available to add connectivity and services in the future
on an “integrate-as-you-grow” basis.
The Cisco 2800 supports more than 90 modules, including WICs, VICs, network
modules, PVDMs, and AIMs (Note: the Cisco 2801 router does not support
network modules).
Embedded Security Hardware
Acceleration
Each of the Cisco 2800 Series routers comes standard with embedded hardware
cryptography accelerators, which when combined with an optional Cisco IOS
Software upgrade help enable WAN link security and VPN services.
Integrated Dual Fast Ethernet
or Gigabit Ethernet Ports
The Cisco 2800 Series provide two 10/100 on the Cisco 2801 and Cisco 2811 and
two 10/100/1000 on the Cisco 2821 and Cisco 2851
Support for Cisco IOS
Software
The Cisco 2800 helps enable end-to-end solutions with full support for the latest
Cisco IOS Software-based QoS, bandwidth management, and security features.
Common feature and command set structure across the Cisco 1700, 1800, 2600,
2800, 3700 and 3800 series routers simplifies feature set selection, deployment,
management, and training.
Optional Integrated Power
Supply for Distribution of
Power Over Ethernet (PoE)
An optional upgrade to the internal power supply provides in-line power (802.3afcompliant Power-over-Ethernet [PoE] and Cisco standard inline power) to optional
integrated switch modules.
Optional Integrated Universal
DC Power Supply
On the Cisco 2811, 2821, and 2851 routers an optional DC power supply is available
that extends possible deployments environments such as central offices and
industrial environments (Note: not available on the Cisco 2801).
Integrated Redundant-PowerSupply (RPS) Connector
On the Cisco 2811, 2821, and 2851 there is a built in external power-supply
connector that eases the addition of external redundant power supply that can be
shared with other Cisco products to decrease network downtime by protecting the
network components from downtime due to power failures.
Modularity—Features and Benefits
The Cisco 2800 Series provides significantly enhanced modular capabilities (refer to Table 2) while
maintaining investment protection for customers. The modular architecture has been redesigned to
support increasing bandwidth requirements, time-division multiplexing (TDM) interconnections, and
fully integrated power distribution to modules supporting 802.3af PoE or Cisco in-line power, while
still supporting most existing modules. With more than 90 modules shared with other Cisco routers
such as the Cisco 1700, 1800, 2600, 3700, and 3800 series, interfaces for the Cisco 2800 Series
can easily be interchanged with other Cisco routers to provide maximum investment protection in
the case of network upgrades. In addition, taking advantage of common interface cards across a
network greatly reduces the complexity of managing inventory requirements, implementing large
network rollouts, and maintaining configurations across a variety of branch-office sizes.
Table 2.
Modularity—Features and Benefits
Feature
Enhanced Network-Module
(NME) Slots
Benefit
The NME slots support existing network modules (Note: NM and NME support on
Cisco 2811, 2821, and 2851 only)
NME Slots offer high data throughput capability (up to 1.6Gbps) and support for
Power over Ethernet (POE).
NME slots are highly flexible with support for extended NMEs (NME-X on Cisco 2821
and 2851 only) and enhanced double-wide NMEs (NME-XDs) (Note: Cisco 2851
only).
High-Performance WIC
(HWIC) Slots with
Enhanced Functionality
Four integrated HWIC slots on Cisco 2811, 2821, and 2851 and two integrated
HWIC slots on Cisco 2801 allow for more flexible and dense configurations.
HWICs slots can also support WICs, VICs, and VWICs
HWIC slots offer high data throughput capability (up to 400 Mbps half duplex or 800
Mbps aggregate throughput) and Power over Ethernet (POE) support.
A flexible form factor supports up to two double-wide HWIC (HWIC-D) modules.
Dual AIM Slots
Dual AIM slots support concurrent services such as hardware-accelerated security, ATM
segmentation and reassembly (SAR), compression, and voice mail (Refer to Table 7 for
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 18
Data Sheet
Feature
Benefit
more details on specific platform support).
Packet Voice DSP
Module (PVDM) Slots
on Motherboard
Slots for Cisco PVDM2 Modules (DSP Modules) are integrated on the motherboard,
freeing slots on the router for other services.
Extension-Voice-Module
(EVM) Slot
The EVM supports additional voice services and density without consuming the networkmodule slot (Note: available only on Cisco 2821 and 2851).
USB Support
Up to two USB ports are available per Cisco 2800 series router. The routers' Universal
Serial Bus (USB) ports enable important security and storage capabilities.
Secure Networking—Feature and Benefits
The Cisco 2800 Series features enhanced security functionality as shown in Table 3. Integrated on
the motherboard of every Cisco 2800 Series router is hardware-based encryption acceleration that
offloads the encryption processes to provide greater IPSec throughput with less overhead for the
router CPU when compared with software-based solutions. With the integration of optional VPN
modules (for enhanced VPN tunnel count), Cisco IOS Software-based firewall, network access
control, or content-engine network modules, Cisco offers the industry's most robust and adaptable
security solution for branch-office routers.
Table 3.
Secure Networking—Feature and Benefits
Feature
Benefit
Cisco IOS Software
Firewall
Sophisticated security and policy enforcement provides features such as stateful, applicationbased filtering (context-based access control), per-user authentication and authorization,
real-time alerts, transparent firewall, and IPv6 firewall.
Secure Sockets Layer
(SSL)
SSL provides security for web transactions by handling authentication, data enryption and
digital signatures. The 2800 Series supports SSL VPNs and SSL acceleration via the AIMVPN/SSL-3.
Onboard VPN
Encryption Acceleration
The Cisco 2800 Series supports IPSec Digital Encryption Standard (DES), Triple DES
(3DES), Advanced Encryption Standard (AES) 128, AES 192, and AES 256 cryptology
without consuming an AIM slot.
Network Admissions
Control (NAC)
A Cisco Self-Defending Network initiative, NAC seeks to dramatically improve the ability of
networks to identify, prevent, and adapt to threats by allowing network access only to
compliant and trusted endpoint devices.
Multiprotocol Label
Switching (MPLS) VPN
Support
The Cisco 2800 Series supports specific provider edge functions plus a mechanism to
extend customers' MPLS VPN networks out to the customer edge with virtual routing and
forwarding (VRF) firewall and VRF IPSec. For details on the MPLS VPN support on the
different versions of the Cisco 2800 Series, please check the feature navigator tool on
http://www.cisco.com.
USB eToken Support
USB eTokens from Aladdin Knowledge Systems (available at
http://www.aladdin.com/etoken/cisco/) provides secure configuration distribution and allows
users to store VPN credentials for deployment
AIM-Based Security
Acceleration
Support for an optional dedicated security AIM can deliver 2 to 3 times the performance of
embedded encryption capabilities with Layer 3 compression.
Intrusion Prevention
System (IPS)
Flexible and high performance support is offered through Cisco IOS® Software or an
intrusion-detection-system (IDS) network module.
The ability to load and enable selected IDS signatures in the same manner as Cisco IDS
Sensor Appliances
Advanced Application
Inspection and Control
Cisco IOS Firewall includes HTTP and several email inspection engines that can be used to
detect misuse of port 80 and email connectivity.
Cisco Easy VPN Remote
and Server Support
The Cisco 2800 Series eases administration and management of point-to-point VPNs by
actively pushing new security policies from a single headend to remote sites.
Dynamic Multipoint VPN
(DMVPN)
DMVPN is a Cisco IOS Software solution for building IPSec + generic routing encapsulation
(GRE) VPNs in an easy and scalable manner.
Group Encrypted
Transport (GET) VPN
GET VPN is a Cisco IOS Software solution that simplifies securing large Layer 2 or MPLS
networks requiring partial or full-mesh connectivity by providing tunnel-less VPN connectivity.
URL Filtering
URL filtering is available onboard with an optional content-engine network module or external
with a PC server running the URL filtering software.
Cisco Router and
Security Device Manager
(SDM)
This intuitive, easy-to-use, Web-based device-management tool is embedded within the
Cisco IOS Software access routers; it can be accessed remotely for faster and easier
deployment of Cisco routers for both WAN access and security features.
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 5 of 18
Data Sheet
IP Telephony Support—Features and Benefits
The Cisco 2800 Series allows network managers to provide scalable analog and digital telephony
without investing in a one-time solution (refer to Table 4 for more detail), allowing enterprises
greater control of their converged telephony needs. Using the voice and fax modules, the Cisco
2800 Series can be deployed for applications ranging from voice-over-IP (VoIP) and voice-overFrame Relay (VoFR) transport to robust, centralized solutions using the Cisco Survivable Remote
Site Telephony (SRST) solution or distributed call processing using Cisco Call Manager Express
(CME). The architecture is highly scalable with the ability to connect up to 12 T1/E1s trunks, 52
foreign-exchange-station (FXS) ports, or 36 foreign-exchange-office (FXO) ports.
Table 4.
IP Telephony Support—Features and Benefits
Feature
Benefit
IP Phone Support
Optional support for Cisco in-line power distribution to Ethernet switch network modules
and HWICs can be used to power Cisco IP phones.
EVM Module Slots
Extension Voice Module Slots, available only on the Cisco 2821 and Cisco 2851, provide
support for the Cisco High-Density Analog and Digital Extension Module for Voice and Fax,
providing support for up to 24 total voice and fax sessions without consuming a Network
Module Slot.
PVDM (DSP) Slots on
Motherboard
DSP (PVDM2) modules deliver support for analog and digital voice, conferencing,
transcoding, and secure Real-Time Transport Protocol (RTP) applications.
Integrated Call
Processing
Cisco CME is an optional solution embedded in Cisco IOS Software that provides call
processing for Cisco IP phones. Cisco CME delivers telephony features similar to those
that are commonly used by business users to meet the requirements of the small to
medium-sized offices.
Integrated Voice Mail
Support for up to a 250 mailboxes using the Cisco Unity Express voice messaging system
is possible with the integration of an optional voice-mail AIM or network module.
Broad Range of Voice
Interfaces
Interfaces for public switched telephone network (PSTN), private branch exchange (PBX),
and key system connections include FXS; FXO; analog direct inward dialing (DID); ear and
mouth (E&M); Centralized Automated Message Accounting (CAMA); ISDN Basic Rate
Interface (BRI); and T1, E1, and J1 with ISDN Primary Rate Interface (PRI); QSIG; E1 R2;
and several additional channel-associated-signaling (CAS) signaling schemes.
Survivable Remote Site
Telephony (SRST)
Branch offices can take advantage of centralized call control while cost-effectively providing
local branch backup using SRST redundancy for IP telephony.
®
Wireless Support—Features and Benefits
The Cisco 2800 Series can provide a complete wireless solution for branch offices, small/medium
sized businesses, and Wi-Fi hotspots. Wireless services enable greater mobility for employees,
partners, and customers, resulting in increased productivity.
Table 5.
Wireless Support—Features and Benefits
Feature
WLAN Connectivity
Benefit
The 802.11b/g or 802.11a/b/g HWIC access point interface card can be used to provide
integrated WLAN connectivity to mobile clients at sites requiring a single access point,
resulting in mobility and enhanced productivity for users.
Dual RP-TNC connectors enable diversity and allow for optimum coverage through the use of
external antennas.
Wireless
Infrastructure
Services
Telephony support for wired and WLAN IP phones is delivered by Cisco CallManager
Express (CCME) or by Survivable Remote Site Telephony (SRST) with Cisco CallManager.
Cordless WLAN IP phones allow users to be mobile and more productive.
Integrated switch modules with Power over Ethernet (POE) enable support for Cisco Aironet
access points (for larger sites) as well as wired IP phones.
Mobility for clients from WLAN to cellular networks is enabled by Mobile IP home agent
support.
IEEE 802.1x local authentication using LEAP provides enhanced reliability through survivable
authentication for WLAN clients during WAN failures.
Customizable guest access is enabled with the service selection gateway features, along with
the Subscriber Edge Services Manager.
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 6 of 18
Data Sheet
Feature
Benefit
Land Mobile Radio
Over IP
LMR over IP support allows radio users (e.g., security personnel, maintenance personnel, police
officers, etc.) to communicate via IP with phone and PC users, delivering improved
communications and productivity.
Wi-Fi Hotspot
Services
The access zone router and service selection gateway services features can be used to deploy
secure public WLAN access services with an integrated HWIC-AP for small sites or with Cisco
Aironet access points for larger sites. Wi-Fi hotspot services can be offered for additional revenue
for public locations (e.g., restaurants, hotels, airports, etc.) or a value-added service for customer
satisfaction.
Cost of Ownership and Ease of Use—Features and Benefits
The Cisco 2800 Series continues the heritage of offering versatility, integration, and power to
branch offices. The Cisco 2800 Series offers many enhancements to help enable the support of
multiple services in the branch office as shown in the table below.
Table 6.
Cost of Ownership and Ease of Use—Feature and Benefits
Feature
Benefit
Integrated Channel Service
Unit/Data Service Unit
(CSU/DSU), Add/Drop
Multiplexers, Firewall, Modem,
Compression, and Encryption
Consolidates typical communications equipment found in branch-office wiring
closets into a single, compact unit; this space-saving solution provides better
manageability
Optional Network Analysis
Module
Provides application-level visibility into network traffic for troubleshooting,
performance monitoring, capacity planning, and managing network-based services
(Note: Cisco 2811, 2821, and 2851 only)
Cisco IOS IP Service Level
Agreements (IP SLAs)
With Cisco IOS IP SLAs, users can verify service guarantees, increase network
reliability by validating network performance, proactively identify network issues,
and increase Return on Investment (ROI) by easing the deployment of new IP
services
Cisco IOS Software Warm
Reboot
Reduces system boot time, and decreases downtime caused by Cisco IOS
Software reboots (Cisco 2811, 2821 and 2851)
Enhanced Setup Feature
Optional setup wizard with context-sensitive questions guides the user through the
router configuration process, allowing faster deployment
CiscoWorks Support
Offers advanced management and configuration capabilities through a Web-based
GUI
Cisco AutoInstall
Configures remote routers automatically across a WAN connection to save cost of
sending technical staff to the remote site
Cisco IOS Embedded Event
Manager (EEM)
Enables automation of many network management tasks and directs the operation
of Cisco IOS to increase availability, collect information, and notify external
systems or personnel about critical events
Summary and Conclusion
As companies strive to lower the cost of running their network and increase the productivity of
their end users with network applications, more intelligent branch-office solutions are required.
The Cisco 2800 Series offers these solutions by providing enhanced performance and increased
modular density to support multiple services at wire speed. The Cisco 2800 Series is designed
to consolidate the functions of many separate devices into a single, compact package that can
be managed remotely. Because the Cisco 2800 Series routers are modular devices, interface
configurations are easily customized to accommodate a wide variety of network applications,
such as branch-office data access, integrated switching, voice and data integration, wireless LAN
services, dial access services, VPN access and firewall protection, business-class DSL, content
networking, intrusion prevention, inter-VLAN routing, and serial device concentration. The Cisco
2800 Series provides customers with the industry's most flexible, adaptable infrastructure to meet
both today's and tomorrow's business requirements for maximum investment protection.
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 7 of 18
Data Sheet
Product Specifications
Table 7.
Chassis Specifications
Cisco 2800 Series
Cisco 2801
Cisco 2811
Cisco 2821
Cisco 2851
Product Architecture
DRAM
Compact Flash
Default: 128 MB
Default: 256 MB
Default: 256 MB
Maximum:
384 MB
Maximum: 768 MB
Maximum: 1 GB
Default: 64 MB
Default: 64 MB
Maximum:
128MB
Maximum: 256 MB
Fixed USB 1.1 Ports
1
Onboard LAN Ports
2-10/100
Onboard AIM
(Internal) Slot
2
Interface Card Slots
2
4 slots; 2 slots
support HWIC,
WIC, VIC, or
VWIC type
modules
2-10/100/1000
4 slots, each slot can support HWIC, WIC, VIC, or VWIC type
modules
1 slot supports
WIC, VIC, or
VWIC type
modules
1 slot supports
VIC or VWIC
type modules
Network-Module Slot
No
1 slot, supports NM and
NME type modules
1 slot, supports
NM, NME and
NME-X type
modules
Extension Voice
Module Slot
0
1
PVDM (DSP) Slots
on Motherboard
2
3
Integrated HardwareBased Encryption
Yes
VPN Hardware
Acceleration
(on Motherboard)
DES, 3DES, AES 128, AES 192, and AES 256
Optional Integrated
In-Line Power (PoE)
Yes, requires AC-IP power supply
Console Port
(up to 115.2 kbps)
1
Auxiliary Port
(up to 115.2 kbps)
1
Minimum Cisco IOS
Software Release
12.3(8)T
Rack Mounting
Yes, 19-inch
Yes, 19- and 23-in. options
Wall Mounting
No
Yes
No
1 slot,
supports NM,
NME, NME-X,
NMD and
NME-XD type
modules
No
Power Requirements
AC Input Voltage
100 to 240 VAC, autoranging
AC Input Frequency
47-63 Hz
AC Input Current
2A (110V) 1A (230V)
AC Input Surge
Current
50A maximum, one cycle (-48V power included)
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
3A (110V) 2A (230V)
Page 8 of 18
Data Sheet
Cisco 2800 Series
Cisco 2801
Cisco 2811
Cisco 2821
Cisco 2851
AC-IP Maximum InLine Power
Distribution
120W
160W
240W
360W
AC-IP Input Current
4A (110V) 2A (230V)
AC-IP Input Surge
Current
50A maximum, one cycle (-48V power included)
DC Input Voltage
No DC Power
Option available
DC Input Current
No DC Power
Option available
8A (110V) 4A (230V)
24 to 60 VDC, autoranging positive or negative
8A (24V)
12A (24V)
3A (60V)
5A (60V)
Startup current
50A<10 ms
Startup current 50A<10 ms
Power Dissipation-AC
without IP Phone
Support
150W (511 BTU/hr)
170W (580 BTU/hr)
280W (955
BTU/hr)
280W (955
BTU/hr)
Power Dissipation-AC
with IP Phone
Support-System Only
150W (511 BTU/hr)
210W (717 BTU/hr)
310W (1058
BTU/hr)
370W (1262
BTU/hr)
Power Dissipation-AC
with IP Phone
Support-IP Phones
180W (612 BTU/hr)
160W (546 BTU/hr)
240W (819
BTU/hr)
360W (1128
BTU/hr)
Power Dissipation-DC
Not applicable
180W (614 BTU/hr)
300W (1024
BTU/hr)
300W (1024
BTU/hr)
RPS
No
External only, connector for RPS provided by default
Recommended RPS
Unit
No RPS option
Cisco RPS-675 Redundant Power System
Environmental Specifications
Operating
Temperature
32° to 104°F (0° to 40°C)
Non-Operating
Temperature
4° to 149°F (-20° to 65°C)
Maximum Operating
Temperature at
Altitude
40°C @ sea
level
40°C @ sea level
31°C @ 6,000 ft
(1800 m)
30°C @ 13,000 ft (4000 m)
25°C @ 10,000
ft (3000 m)
40°C @ 6,000 ft (1800 m)
27.2°C @ 15,000 ft (4600 m)
Note: Derate 1.4°C per 1,000 ft above 6,000 ft
Note: Derate 1.5°C
per 1000 ft
Operating Humidity
10 to 85% noncondensing
Dimensions
(H x W x D)
1.72 x 17.5 x
16.5 in.
1.75 x 17.25 x 16.4
in.
(43.7 x 445 x
419 mm)
(44.5 x 438.2 x
416.6 mm)
Rack Height
1 rack unit (1RU)
Weight
(Fully Configured)
13.7 lb (6.2 kg)
Noise Level (Min/Max)
5 to 95%, non-condensing
3.5 x 17.25 x 16.4 in.
(88.9 x 438.2 x 416.6 mm)
2RU
14 lb (6.4 kg)
39 dBA for
normal operating
temperature
(<90°F/32.2°C)
47 dBA for normal
operating
temperature
(<90°F/32.2°C)
53.5 dBA (@
maximum fan
speed)
57 dBA (@
maximum fan
speed)
25 lb (11.4 kg)
44 dBA for normal operating
temperature (<90°F/32.2°C)
53 dBA (@ maximum fan speed)
Regulatory Compliance
NEBS
No
Yes
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Yes
Page 9 of 18
Data Sheet
Cisco 2800 Series
Safety
Cisco 2801
Cisco 2811
Cisco 2821
Cisco 2851
UL 60950
CAN/CSA C22.2 No. 60950
IEC 60950
EN 60950-1
AS/NZS 60950
Immunity
EN300386
EN55024/CISPR24
EN50082-1
EN61000-6-2
EMC
FCC Part 15
ICES-003 Class A
EN55022 Class A
CISPR22 Class A
AS/NZS 3548 Class A
VCCI Class A
EN 300386
EN61000-3-3
EN61000-3-2
FIPS-2
FIPS 140-2 Certification for 2801, 2811, 2821, 2851
TELCOM**
For all four platforms, Telecom compliance standards depend upon country and interface
type. Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European
Directive 99/5/EC and relevant TBR's. For specific information see the datasheet for the
specific interface card.
Homologation requirements vary by country and interface type. For specific country
information, see the on-line approvals data base:
http://tools.cisco.com/cse/prdapp/jsp/externalsearch.do?action=externalsearch&page=EXT
ERNAL_SEARCH&module=EXTERNAL_SEARCH
Modular Support
Table 8.
Modules and Interface Cards Supported
Module
Description
Cisco
2801
Cisco
2811
Cisco
2821
Cisco
2851
Ethernet Switching Network Modules
NME-16ES-1G
One 16-port 10/100 EtherSwitch
service module, 1 10/100/1000 port,
and IP Base
No
X
X
X
NME-16ES-1G-P
One 16-port 10/100 Cisco EtherSwitch
service module with802.3af, 1
10/100/1000 port, and IP Base
No
X
X
X
NME-X-23ES-1G
One 23-port 10/100 EtherSwitch
service module, 1 10/100/1000 port,
and IP Base
No
No
X
X
NME-X-23ES-1G-P
One 23-port 10/100 Cisco EtherSwitch
service module with802.3af, 1
10/100/1000 port with 802.3af, and IP
Base
No
No
X
X
NME-XD-24ES-2S-P
One 24-port 10/100 Cisco EtherSwitch
service module with802.3af, 1 SFP,
Cisco StackWise connectors, and IP
Base
No
No
No
X
NME-XD-48ES-2S-P
One 48-port 10/100 Cisco EtherSwitch
service module with 802.3af, 2 SFPs,
and IP Base
No
No
No
X
NM-16ESW
16-port 10/100 Cisco EtherSwitch®
Network Module
No
X
X
X
NM-16ESW-1GIG
16-port 10/100 Cisco EtherSwitch
Network Module with 1 Gigabit
Ethernet (1000BASE-T) port
No
X
X
X
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 10 of 18
Data Sheet
Module
Description
Cisco
2801
Cisco
2811
Cisco
2821
Cisco
2851
NM-16ESW-PWR
16-port 10/100 Cisco EtherSwitch
Network Module with in-line power
support
No
X
X
X
NM-16ESW-PWR-1GIG
16-port 10/100 Cisco EtherSwitch
Network Module with in-line power
and Gigabit Ethernet
No
X
X
X
NMD-36ESW
36-port 10/100 Cisco EtherSwitch
High-Density Services Module
(HDSM)
No
No
No
X
NMD-36ESW-2GIG
36-port 10/100 Cisco EtherSwitch
HDSM with 1 Gigabit Ethernet
(1000BASE-T) port
No
No
No
X
NMD-36ESW-PWR
36-port 10/100 Cisco EtherSwitch
HDSM with in-line power support
No
No
No
X
NMD-36ESW-PWR-2G
36-port 10/100 Cisco EtherSwitch
HDSM with in-line power and Gigabit
Ethernet
No
No
No
X
Serial Connectivity Network Modules
NM-1T3/E3
1-port clear-channel T3/E3 network
module
No
X
X
X
NM-1HSSI
1-port High-Speed Serial Interface
(HSSI) network module
No
X
X
X
NM-4A/S
4-port asynchronous/synchronous
serial network module
No
X
X
X
NM-8A/S
8-port asynchronous/synchronous
serial network module
No
X
X
X
NM-16A/S
16-port asynchronous/synchronous
serial network nodule
No
X
X
X
NM-16A
16-port asynchronous serial network
module
No
X
X
X
NM-32A
32-port asynchronous serial network
module
No
X
X
X
Channelized T1/E1 and ISDN Network Modules
NM-1CE1T1-PRI
1-port Channelized E1/T1/ISDN PRI
network module
No
X
X
X
NM-2CE1T1-PRI
2-port Channelized E1/T1/ISDN PRI
network module
No
X
X
X
NM-4B-S/T
4-port ISDN BRI network module (S/T
interface)
No
X
X
X
NM-4B-U
4-port ISDN BRI network module with
integrated Network Termination 1
(NT1) (U interface)
No
X
X
X
NM-8B-S/T
8-port ISDN BRI network module (S/T
interface)
No
X
X
X
NM-8B-U
8-port ISDN BRI network module with
integrated NT1 (U interface)
No
X
X
X
ATM Network Modules
NM-1A-T3
1-port DS-3 ATM network module
No
X
X
X
NM-1A-E3
1-port E3 ATM network module
No
X
X
X
Analog Dialup and Remote Access Network Modules
NM-8AM-V2
8-port analog modem network module
with v.92
No
X
X
X
NM-16AM-V2
16-port analog modem network
module with v.92
No
X
X
X
No
X
X
X
Voice Network Modules and Accessories
NM-HD-1V
1-slot IP Communications voice and
fax network module
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 11 of 18
Data Sheet
Module
Description
Cisco
2801
Cisco
2811
Cisco
2821
Cisco
2851
NM-HD-2V
2-slot IP Communications voice and
fax network module
No
X
X
X
NM-HD-2VE
2-slot IP Communications enhanced
voice and fax network module
No
X
X
X
NM-HDA-4FXS
High-density analog voice and fax
network module with 4 FXS slots
No
X
X
X
NM-HDV2
IP Communications high-density voice
and fax network module
No
X
X
X
NM-HDV2-1T1/E1
1-port T1/E1 IP Communications highdensity voice and fax network module
No
X
X
X
NM-HDV2-2T1/E1
2-port T1/E1 IP Communications highdensity voice and fax network module
No
X
X
X
NM-HDV=
High Density Voice/Fax Network
Module (Single VIC Slot)
No
X
X
X
NM-HDV-1T1-12
1-port 12-channel T1 voice and fax
network module
No
X
X
X
NM-HDV-1T1-24
1-port 24-channel T1 voice and fax
network module
No
X
X
X
NM-HDV-1T1-24E
Single-port 24 enhanced channel T1
voice and fax network module
No
X
X
X
NM-HDV-2T1-48
2-port 48-channel T1 voice and fax
network module
No
X
X
X
NM-HDV-1E1-12
1-port 12-channel E1 voice and fax
network module
No
X
X
X
NM-HDV-1E1-30
1-port 30-channel E1 voice and fax
network module
No
X
X
X
NM-HDV-1E1-30E
1-port 30-enhanced-channel E1 voice
and fax Network Module
No
X
X
X
NM-HDV-2E1-60
2-port 60-channel E1 voice and fax
network module
No
X
X
X
NM-HDV-1J1-30
1-port 30-channel J1 high-density
voice network module
No
X
X
X
NM-HDV-1J1-30E
1-port 30-enhanced-channel J1 highdensity voice network module
No
X
X
X
NM-HDV-FARM-C36
36-port transcoding and conferencing
DSP farm
No
X
X
X
NM-HDV-FARM-C54
54-port transcoding and conferencing
DSP farm
No
X
X
X
NM-HDV-FARM-C90
90-port transcoding and conferencing
DSP farm
No
X
X
X
NME-WAE-302-K9
Cisco Wide Area Application Services
(WAAS) Network Module with 80 GB
hard disk and 512 MB memory
No
X
X
X
NME-WAE-502-K9
Cisco Wide Area Application Services
(WAAS) Network Module with 120 GB
hard disk and 1 GB memory
No
X
X
X
NME-AON-K9
Cisco 2800/3700/3800 Series AON
Enhanced Network Module
No
X
X
X
NM-CE-BP-40G-K9
Cisco Content Engine Network
Module, basic performance, 40-GB
IDE hard disk
No
X
X
X
NM-CE-BP-80G-K9
Cisco Content Engine Network
Module, basic performance, 80-GB
IDE hard disk
No
X
X
X
Application Network Modules
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 12 of 18
Data Sheet
Module
Description
Cisco
2801
Cisco
2811
Cisco
2821
Cisco
2851
NM-CE-BP-40G-S-K9
Cisco Content Engine Network
Module for Security, basic
performance, 40-GB IDE hard disk
No
X
X
X
NM-CE-BP-80G-S-K9
Cisco Content Engine Network
Module for Security, basic
performance, 80-GB IDE hard disk
No
X
X
X
NM-CIDS-K9
Cisco IDS Network Module
No
X
X
X
NM-CUE
Cisco Unity Express Voice-Mail
Network Module
No
X
X
X
NM-CUE-EC
Cisco Unity Express Voice-Mail
Network Module extended capacity
No
X
X
X
NM-NAM
Cisco 2600, 3660, and 3700 series
network analysis module
No
X
X
X
NM-AIR-WLC6-K9
Cisco wireless LAN controller network
module
No
X
X
X
Circuit Emulation over IP (CEoIP) Network Modules
NM-CEM-4SER
4-port serial Circuit Emulation over IP
(CEoIP) network module
No
X
X
X
NM-CEM-4TE1
4-port T1/E1 Circuit Emulation over IP
(CEoIP) network module
No
X
X
X
Cisco IP VSAT Satellite WAN
Network Module
No
X
X
X
High density voice/fax extension
module -8 FXS/DID
No
No
X
X
Satellite Module
NM-1VSAT-GILAT
Extension Voice Modules
EVM-HD-8FXS/DID
Ethernet Switching High-Speed WAN Interface Cards
HWIC-4ESW
4-port single-wide 10/100BaseT
Ethernet switch HWIC
X
X
X
X
HWIC-D-9ESW
9-port double-wide 10/100BaseT
Ethernet switch HWIC
X
X
X
X
HWIC-4ESW-POE
4-port Ethernet switch HWIC, Power
over Ethernet capable
X
X
X
X
HWIC-D-9-ESW-POE
9-port Ethernet switch HWIC, Power
over Ethernet capable
X
X
X
X
Ethernet High-Speed WAN Interface Cards
HWIC-1FE
1-port Fast Ethernet HWIC
X
X
X
X
HWIC-1GE-SFP
Cisco Gigabit Ethernet High-Speed
Interface Card
No
X
X
X
802.11b/g HWIC access point
interface card (A-Americas; E-Europe;
J-Japan)
X
X
X
X
802.11a/b/g HWIC access point
interface card (A-Americas; E-Europe;
J-Japan)
X
X
X
X
Wireless High-Speed WAN Interface Cards
HWIC-AP-G-A
HWIC-AP-G-E
HWIC-AP-G-J
HWIC-AP-AG-A
HWIC-AP-AG-E
HWIC-AP-AG-J
Serial WAN Interface Cards and High-Speed WAN Interfaced Cards
HWIC-4T
4-Port serial HWIC
X
X
X
X
HWIC-4A/S
4-Port Async/Sync serial HWIC
X
X
X
X
HWIC-8A
8-Port Async HWIC
X
X
X
X
HWIC-8A/S-232
8-Port Async/Sync serial HWIC, EIA232
X
X
X
X
HWIC-16A
16-Port Async HWIC
X
X
X
X
WIC-1T
1-port high-speed serial WIC
X
X
X
X
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 13 of 18
Data Sheet
Module
Description
Cisco
2801
Cisco
2811
Cisco
2821
Cisco
2851
WIC-2T
2-port high-speed serial WIC
X
X
X
X
WIC-2A/S
2-port Asynch/Synch serial WIC
X
X
X
X
CSU/DSU WAN Interface Cards
WIC-1DSU-T1-V2
1-port T1/Fractional-T1 DSU/CSU
WIC
X
X
X
X
WIC-1DSU-56K4
1-port 4-wire 56-/64-kbps CSU/DSU
WIC
X
X
X
X
ISDN BRI WAN Interface Cards
WIC-1B-U-V2
1-port ISDN BRI with integrated NT1
(U interface)
X
X
X
X
WIC-1B-S/T-V3
1-port ISDN BRI with S/T interface
X
X
X
X
HWIC-1ADSL
1-port ADSLoPOTS HWIC
X
X
X
X
HWIC-1ADSLI
1-port ADSLoISDN HWIC
X
X
X
X
HWIC-ADSL-B/ST
2-port HWIC with 1-port ADSLoPOTS
and 1-port ISDN BRI-S/T
X
X
X
X
HWIC-ADSLI-B/ST
2-port HWIC with 1-port ADSLoISDN
and 1-port ISDN BRI-S/T
X
X
X
X
HWIC-2SHDSL
2-port G.SHDSL HWIC with 2-wire
and 4-wire support
X
X
X
X
HWIC-4SHDSL
4-port G.SHDSL HWIC with 2-wire, 4wire, and 8-wire support
X
X
X
X
WIC-1ADSL
1-port asymmetric DSL (ADSL) over
POTS service WIC
X
X
X
X
WIC-1ADSL-DG
1-port ADSL over basic telephone
service with dying-gasp WIC
X
X
X
X
WIC-1ADSL-I-DG
1-port ADSL over ISDN with dyinggasp WIC
X
X
X
X
WIC-1SHDSL
1-port G.SHDSL WIC (2-wire only)
X
X
X
X
WIC-1SHDSL-V2
1-port G.SHDSL WIC (2-wire or 4wire)
X
X
X
X
WIC-1SHDSL-V3
1-port G.SHDSL WIC with 4-wire
support
X
X
X
X
DSL WAN Interface Cards
Cable (DOCSIS-qualified) High-Speed WAN Interfaced Cards
HWIC-CABLE-D-2
1-port DOCSIS 2.0 qualified cable
HWIC
X
X
X
X
HWIC-CABLE-E/J-2
1-port Euro/J-DOCSIS 2.0 qualified
cable HWIC
X
X
X
X
T1, E1, and G.703 Multiflex Trunk Voice Cards and WAN Interface Cards
VWIC2-1MFT-T1/E1
1-Port T1/E1 Voice/WAN with Drop &
Insert
X
X
X
X
VWIC2-2MFT-T1/E1
2-Port T1/E1 Voice/WAN with Drop &
Insert
X
X
X
X
VWIC2-1MFT-G703
1-Port T1/E1 Voice/WAN with D&I &
unstructured E1 (G703)
X
X
X
X
VWIC2-2MFT-G703
2-Port T1/E1 Voice/WAN with D&I &
unstructured E1 (G703)
X
X
X
X
VWIC-2MFT-T1-DI
2-port RJ-48 multiflex trunk-T1 with
drop and insert
X
X
X
X
VWIC-2MFT-T1
2-port RJ-48 multiflex trunk-T1
X
X
X
X
VWIC-1MFT-T1
1-port RJ-48 multiflex trunk-T1
X
X
X
X
VWIC-1MFT-E1
1-port RJ-48 multiflex trunk-E1
X
X
X
X
VWIC-1MFT-G703
1-port RJ-48 multiflex trunk-G.703
X
X
X
X
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 14 of 18
Data Sheet
Module
Description
Cisco
2801
Cisco
2811
Cisco
2821
Cisco
2851
VWIC-2MFT-E1
2-port RJ-48 multiflex trunk-E1
X
X
X
X
VWIC-2MFT-E1-DI
2-port RJ-48 multiflex trunk-E1 with
drop and insert
X
X
X
X
VWIC-2MFT-G703
2-port RJ-48 multiflex trunk-G.703
X
X
X
X
VIC2-2FXS
2-port VIC-FXS
X
X
X
X
VIC2-2FXO
2-port VIC-FXO (universal)
X
X
X
X
VIC2-4FXO
4-port VIC-FXO (universal)
X
X
X
X
VIC2-2E/M
2-port VIC-E&M
X
X
X
X
VIC2-2BRI-NT/TE
2-port VIC card-BRI (NT and TE)
X
X
X
X
VIC-2DID
2-port DID voice and fax interface card
X
X
X
X
VIC-4FXS/DID
4-port FXS or DID VIC
X
X
X
X
X
X
X
X
Voice Interface Cards
Analog Modem WAN Interface Cards
WIC-1AM
1-port analog modem WIC
WIC-2AM
2-port analog modem WIC
X
X
X
X
WIC-1AM-V2
1-port analog modem WIC (updated
version)
X
X
X
X
WIC-2AM-V2
2-port analog modem WIC (updated
version)
X
X
X
X
Advanced Integration Modules
AIM-ATM
High-performance ATM SAR AIM
No
X
X
X
AIM-ATM-1E1
High Performance ATM AIM/E1
Bundle, AIM-ATM with VWIC-1MFTE1
No
X
X
X
AIM-ATM-1T1
High Performance ATM AIM/T1
Bundle, AIM-ATM with VWIC-1MFTT1
No
X
X
X
AIM-ATM-1T1/E1
T1/E1 ATM bundle includes 1 VWIC21MFT-T1/E1 and 1 AIM-ATM.
No
X
X
X
AIM-ATM-4T1/E1
T1/E1 ATM bundle includes 2 VWIC22MFT-T1/E1s and 1 AIM-ATM.
No
X
X
X
AIM-ATM-4T1/E1
4 port ATM IMA bundle
No
X
X
X
AIM-ATM-4T1/E1
4 port ATM IMA bundle
No
X
X
X
AIM-COMPR2-V2
Data compression AIM
No
X
X
X
AIM-CUE
Cisco Unity Express Voice-Mail AIM
X
X
X
X
AIM-VPN/SSL-2
DES/3DES/AES/SSL VPN
Encryption/Compression Advanced
Integration Module (AIM) with IPv6
encryption.
X
X
X
X
AIM-VPN/EPII-PLUS
Enhanced-performance DES, 3DES,
AES, and compression VPN
encryption AIM
X
X
X
X
PVDM2-8
8-channel fax and voice DSP module
X
X
X
X
PVDM2-16
16-channel fax and voice DSP module
X
X
X
X
PVDM2-32
32-channel fax and voice DSP module
X
X
X
X
PVDM2-48
48-channel fax and voice DSP module
X
X
X
X
PVDM2-64
64-channel fax and voice DSP module
X
X
X
X
Packet Voice/Data Modules
Digital Modem Packet Voice/Data Modules
PVDM2-12DM
12 Port Digital Modem Module
No
X
X
X
PVDM2-24DM
24 Port Digital Modem Module
No
X
X
X
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 15 of 18
Data Sheet
Module
Description
Cisco
2801
Cisco
2811
Cisco
2821
Cisco
2851
PVDM2-36DM
36 Port Digital Modem Module
No
X
X
X
MEMUSB-64FT
64 Mb USB Flash
X
X
X
X
MEMUSB-128FT
128 Mb USB Flash
X
X
X
X
MEMUSB-256FT
256 Mb USB Flash
X
X
X
X
USB Flash Storage
Availability
The Cisco 2800 Series has been orderable since September, 2004, with first customer shipments
at the end of September 2004.
Ordering Information
To place an order, visit the Cisco Ordering Home Page.
Table 9.
Ordering Information for Cisco 2800 Integrated Services Routers
Part Number
Product Name
CISCO2801
Integrated services router with AC power, 2FE, 4 Interface Card Slots, 2 PVDM slots, 2 AIMs, and
Cisco IOS IP Base Software
CISCO2801-AC-IP
Integrated services router with AC power including power over ethernet distribution capability,
2FE, 4 Interface Card Slots, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software
CISCO2811
Integrated services router with AC power, 2FE, 1 NME, 4 HWICs, 2 PVDM slots, 2 AIMs, and
Cisco IOS IP Base Software
CISCO2811-AC-IP
Integrated services router with AC power including power over ethernet distribution capability,
2FE, 1 NME, 4 HWICs, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software
CISCO2811-DC
Integrated services router with DC power, 2FE, 1 NME, 4 HWICs, 2 PVDM slots, 2 AIMs, and
Cisco IOS IP Base Software
CISCO2821
Integrated services router with AC power, 2GE, 1 NME-X, 1 EVM, 4 HWICs, 3 PVDM slots, 2
AIMs, and Cisco IOS IP Base Software
CISCO2821-AC-IP
Integrated services router with AC power including power over ethernet distribution capability,
2GE, 1 NME-X, 1 EVM, 4 HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software
CISCO2821-DC
Integrated services router with DC power, 2GE, 1 NME-X, 1 EVM, 4 HWICs, 3 PVDM slots, 2
AIMs, and Cisco IOS IP Base Software
CISCO2851
Dual Gigabit Ethernet integrated services router with AC power, 2GE, 1 NME-XD, 1 EVM, 4
HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software
CISCO2851-AC-IP
Integrated services router with AC power including power over ethernet distribution capability,
2GE, 1 NME-XD, 1 EVM, 4 HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software
CISCO2851-DC
Integrated services router with DC power, 2GE, 1 NME-XD, 1 EVM, 4 HWICs, 3 PVDM slots, 2
AIMs, and Cisco IOS IP Base Software
Also, check with your Cisco representative regarding security, xDSL, and voice bundles for the
Cisco 2800 Series.
To download the software, visit the Cisco Software Center.
Table 10.
Software Ordering Information
Part Number
Product Name
Supported Platform
S28IPB
Cisco 2800 IP Base
Cisco 2801
S28NIPBK9
Cisco 2800 IP Base K9
Cisco2801
S28IPV
Cisco 2800 IP Voice
Cisco 2801
S28NIPVK9
Cisco 2800 IP Voice K9
Cisco 2801
S28ASK9
Cisco 2800 Advanced Security K9
Cisco 2801
S28EB
Cisco 2800 Enterprise Base
Cisco 2801
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 16 of 18
Data Sheet
Part Number
Product Name
Supported Platform
S280EBK9
Cisco 2800 Enterprise Base K9
Cisco 2801
S28SPSK9
Cisco 2800 SP Services K9
Cisco 2801
S280ES
Cisco 2800 Enterprise Services without Crypto
Cisco 2801
S28ESK9
Cisco 2800 Enterprise Services K9
Cisco 2801
S28AISK9
Cisco 2800 Advanced IP Services K9
Cisco 2801
S28AESK9
Cisco 2800 Advanced Enterprise Services K9
Cisco 2801
S28NIPB
Cisco 2800 IP Base
Cisco 2811, 2821, 2851
S28NIPV
Cisco 2800 IP Voice
Cisco 2811, 2821, 2851
S28NIVS
Cisco 2800 Int Voice/Video: GK, IPIP GW, TDMIP GW
Cisco 2811, 2821, 2851
S28NAVSK9
Cisco 2800 Int Voice/Video: GK, IPIP. GW, TDMIP GW AES
Cisco 2811, 2821, 2851
S28NASK9
Cisco 2800 Advanced Security K9
Cisco 2811, 2821, 2851
S28NEB
Cisco 2800 Enterprise Base
Cisco 2811, 2821, 2851
S28NEBK9
Cisco 2800 Enterprise Base K9
Cisco 2811, 2821, 2851
S28NSPSK9
Cisco 2800 SP Services K9
Cisco 2811, 2821, 2851
S28NES
Cisco 2800 Enterprise Services
Cisco 2811, 2821, 2851
S28NESK9
Cisco 2800 Enterprise Services K9
Cisco 2811, 2821, 2851
S28NAISK9
Cisco 2800 Advanced IP Services K9
Cisco 2811, 2821, 2851
S28NAESK9
Cisco 2800 Advanced Enterprise Services K9
Cisco 2811, 2821, 2851
S28NSNAK9
Cisco 2800 Advanced Enterprise Services with SNA switching
software
Cisco 2811, 2821, 2851
Service and Support
Cisco offers a wide range of services programs to accelerate customer success. These innovative
services programs are delivered through a unique combination of people, processes, tools, and
partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your
network investment, optimize network operations, and prepare the network for new applications to
extend network intelligence and the power of your business. For more information about Cisco
Services, see Cisco Technical Support Services or Cisco Advanced Services.
For More Information
For more information about the Cisco 2800 Series, visit
http://www.cisco.com/en/US/products/hwithrouters/ or contact your local account representative.
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 17 of 18
Data Sheet
Printed in USA
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
C78-335076-02 5/07
Page 18 of 18
Download PDF
Similar pages