QuickSpecs
HP MSA 1040 Storage
Overview
The new HP MSA 1040 Storage is designed for entry-level market needs, features 8Gb Fibre Channel, 1GbE, and 10GbE iSCSI at
previously unattainable entry price points. The new array allows users to take advantage of the latest storage technologies in simple
and efficient ways by providing a good balance between performance and budget resulting in a highly favorable $/GB return on their
investment.
Entry consolidation and virtualization initiatives are now well in your budgetary reach. The MSA 1040 offers many of MSA 2040
features but at more affordable entry price points. ProLiant and BladeSystems administrators as well as IT generalists will find storage
management tasks simple and intuitive with MSA.
The MSA 1040 arrays leverage a new 4th-generation MSA architecture with a new processor, 2-host ports and 4GB cache per controller.
Take advantage of the latest hard drive advances by choosing the form factor and technology which best meets your application and
budget requirements. Unlike many competing arrays, the MSA 1040 ships standard with intuitive management tools and powerful data
services such as Snapshots and Volume Copy for increased data protection.
HP MSA 1040 Storage (SFF)
HP MSA 1040 Storage (LFF)
MSA 1040, shown with 2 controllers installed
1. Power supplies
4. Management Ethernet port
2. 8Gb Fibre Channel, 1GbE iSCSI or
5. Expansion port
10GbE iSCSI
3. CLI port (mini-USB)
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 1
QuickSpecs
HP MSA 1040 Storage
Models
HP MSA 1040 Storage
Models
MSA 1040 Pre-Configured Models:
HP MSA 1040 2-port Fibre Channel Dual Controller LFF Storage
(Includes LFF Array Chassis + two MSA 1040 FC 2-port controllers, SFPs installed, drives
not included)
HP MSA 1040 2-port Fibre Channel Dual Controller SFF Storage
(Includes SFF Array Chassis + two MSA 1040 FC 2-port controllers, SFPs installed, drives
not included)
HP MSA 1040 2-port 1GbE iSCSI Dual Controller LFF Storage
(Includes LFF Array Chassis + two MSA 1040 1GbE 2-port controllers, SFPs installed,
drives not included)
HP MSA 1040 2-port 1GbE iSCSI Dual Controller SFF Storage
(Includes SFF Array Chassis + two MSA 1040 1GbE 2-port controllers, SFPs installed,
drives not included)
HP MSA 1040 2-port 10GbE Dual Controller LFF Storage
(Includes LFF Array Chassis + two MSA 1040 10GbE 2-port controllers, SFPs installed,
drives not included)
HP MSA 1040 2-port 10GbE Dual Controller SFF Storage
(Includes SFF Array Chassis + two MSA 1040 10GbE 2-port controllers, SFPs installed,
drives not included)
DA - 14884 EMEA — Version 2 — April 14, 2014
E7V99A
E7W00A
E7W01A
E7W02A
E7W03A
E7W04A
Page 2
QuickSpecs
HP MSA 1040 Storage
Features
All MSA 1040 models offer a common set of valuable features:
Ease of management featuring browser-based out-of-band access. This allows a department or small company to effectively
handle growing storage requirements, with the aid of an intuitive GUI to administer the unit with a minimum of complexity. Ideal
for local or remote installations.
MSA 1040 comes standard with 64 controller-based snapshots and clone capability. Arrays also support an optional 512 snaps.
Dual controller array models with automated failover for high availability.
All models support a wide variety of drives: High-performance enterprise-class SAS, and high-capacity SAS Midline drives.
MSA 1040 can have a maximum of three disk enclosures (3); consisting of MSA 2040 LFF disk enclosures and/or D2700 SFF disk
enclosures. The array can grow incrementally from a few drives to a maximum of 48 LFF or 99 SFF drives.
Vdisks can be spanned across multiple enclosures
RAID levels 0, 1, 3, 5, 6, 10, 50
Maximum drive counts vary by RAID levels: 2 drive max for RAID level 1; max of 16 drives for RAID levels 0, 3, 5, 6, and 10; max
of 32 drives for RAID level 50
512 LUNs with LUN sizes greater than 40TB depending on the RAID configuration chosen. The maximum LUN size is 128TB
(depending on drive size, capacity and RAID configuration).
Non-disruptive on-line controller code upgrade (requires dual controllers w/ multi-pathing software)
Upgradable by design. Owners of a P2000 G3 array are able to do data-in-place controller upgrades to the new MSA 1040 array.
This unique ability protects the earlier investments in drives, and JBODs. (Note: Certain limitations are applicable- please review
MSA 1040-2040 Upgrade Technical Whitepaper before upgrading your P2000 G3 systems)
Follow us on twitter and be a part of the conversation, and get the latest MSA related news and information at:
http://www.twitter.com/MSAstorage
Application Solutions
The HP MSA 1040 Storage is the ideal solution for customers running Oracle, Microsoft, SAP environments
and those customers who are deploying virtual server technologies like VMware, Hyper-V, and Oracle
Virtual Machine. The MSA 1040 delivers enterprise functionality that enhances virtual environments,
simplifies management, and reduces costs. Easy to deploy, scale and maintain, HP MSA 1040 Arrays
ensure that crucial business data remains available.
HP has developed best-in-class expertise in Oracle, Microsoft, SAP, and Virtualization Hypervisor
technology through extensive testing with the HP MSA 1040, HP servers, and management software; high
availability and disaster recovery solutions; and backup and recovery on the Oracle, Microsoft, and SAP
application platforms. As a result, our customers can expect a wide range of operational and business
benefits where they can:
Learn more
Deploy IT assets across multiple locations.
Incrementally grow storage without interruption.
Enable high availability and disaster recovery capabilities for critical applications.
Deploy a remote disaster recovery site.
To learn more about specific HP Storage Solutions that are built with Oracle, Microsoft, SAP and
Virtualization environments in mind, visit the solution sites supporting each of these applications.
HP Storage for Oracle hyperlink to: http://www.hp.com/storage/oracle
HP Storage for Microsoft hyperlink to: http://www.hp.com/storage/microsoft
HP Storage for SAP hyperlink to: http://www.hp.com/storage/sap
HP Storage for VMware hyperlink to: http://www.hp.com/go/vmware/storage
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 3
QuickSpecs
HP MSA 1040 Storage
Family Information
MSA 1040
Capacity
Minimum / with maximum
additional drive enclosures
LFF:
48 TB (single LFF array-head -using 12 x 4TB LFF SAS MDL drives)
192 TB (by adding 3 LFF Disk Enclosures behind LFF Array & using 4TB LFF SAS MDL drives)
SFF:
28.8 TB (single SFF array-head - using 24 x 1.2TB SFF SAS drives)
118 TB (by adding 3 SFF Disk Enclosures behind SFF Array & using 1.2TB SFF SAS drives)
NOTE: maximum available storage capacity depends on the RAID level being implemented
Controller Cache
4 GB per controller
Total LUNs
(LUN sizes are dependent
on the disk and RAID
configuration chosen)
Host Interconnect
512
maximum LUN size: 128TB
Maximum Drives
w/ 3 expansion
Maximum Host Supported
Standard Software
2 x 8Gb Fibre Channel ports per controller
2 x 1GbE RJ-45 ports per controller
2 x 10GbE ports per controller
48 LFF/99 SFF
64
Snapshot, 64 (snaps)
Clone
Remote Snap
Max Snapshot (512)
Optional Software
Product Technology
MSA 1040 Models
MSA 1040 Storage offers 3 factory configured models:
MSA 1040 8Gb FC with 2-ports per controller
MSA 1040 1GbE iSCSI with 2-ports per controller
MSA 1040 10GbE iSCSI with 2-ports per controller
Modular Chassis
2U rack height. 12 Large Form Factor or 24 Small Form Factor drive bays, accommodating SAS and SAS MDL
Drives
Optional Disk Enclosures Users have a choice of chassis for the array head between LFF and SFF drives. Additionally, users can choose
between disk enclosures accommodating either drive sizes. Both the MSA 2040 disk enclosure and the
D2700 disk enclosure can be hot-added to an operating array.
MSA 2040 3.5-inch Disk Enclosure. This 2U unit has twelve LFF (3.5-inch) drive bays and accepts for MSA
dual-ported SAS and SAS MDL drives. Each pre-configured HP MSA 2040 LFF Disk Enclosure (C8R18A) has
two I/O modules.
This 3.5-inch MSA disk enclosure can be attached to either an MSA 1040 LFF or SFF array head.
Each disk enclosure ships standard with two .5m mini-SAS to mini-SAS cables for cascading to other
disk enclosures
Up to three MSA 2040 3.5-inch disk enclosures can be attached to an MSA 1040 Array.
D2700 2.5-inch Disk Enclosure. This 2U storage enclosure (AJ941A) is designed to support twenty five HP
Storage or ProLiant 2.5-inch SFF 6Gb SAS or SAS MDL hard drives. It ships standard with dual I/O modules
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 4
QuickSpecs
HP MSA 1040 Storage
Family Information
installed.
Scalability
Vdisks
LUNs
RAID 0, 1, 3, 5, 6, 10, 50
Performance
This 2.5-inch D2700 disk enclosure can be attached to an MSA 1040 (SFF or LFF) array head
The D2700 enclosure ships standard with two .5m mini-SAS to mini-SAS cables for cascading to other
disk enclosures
Up to three D2700 may be attached to the MSA 1040 array head, providing support for up to 99 SFF
drives.
The MSA 1040 Arrays are designed to allow an installation to begin with smaller capacity and be able to
grow gradually as needed. The flexibility of SAS or SAS MDL drives technology, form factors, sizes, speeds,
and costs per GB allows a system to easily fit in almost any budget.
Large Form Factor configurations can scale up to 48 TB SAS MDL, expandable to 192 TB SAS MDL with
the addition of a maximum of three MSA 2040 3.5-inch Disk Enclosures.
Small Form Factor configurations can scale from 28 TB SAS. With the addition of three D2700 JBODs,
the MSA 1040 storage can support 118 TB SAS.
Vdisks can span across multiple enclosures, where drives used in the Vdisk can be contained in different
enclosures. The maximum number of drives that can be used in RAID 1 Vdisk is 2; RAID 0, 3, 5, 6, and 10 is
16; and for RAID 50 Vdisk is 32.
The MSA 1040 Arrays support 512 volumes and up to 512 snapshots in a system. All of these volumes can
be mapped to LUNs. LUN sizes up to 128 TB depending on the disk and RAID configuration chosen. The array
supports expansion and deletion of any LUN.
In addition to the usual RAID levels, the MSA 1040 features several important additional levels. RAID 6 is the
highest level of RAID protection. It allocates two sets of parity data across drives and allows simultaneous
write operations. It can withstand two simultaneous drive failures without downtime or data loss. RAID 10 is
mirroring and striping without parity. RAID 50 combines the block striping and parity of RAID 5 with the
straight block striping of RAID 0, yielding higher performance than RAID 5 through the addition of RAID 0,
particularly during writes.
The preliminary performance figures provided here are for your reference as many variables exist between
array configurations, workloads, hard drive types, vdisk setup parameters and host system setup.
MSA 1040 Array
Performance
Protocol (host connect)
HP MSA 1040 8Gb FC
Controller1
8Gb
Fibre Channel
MSA 1040 RAID 10 Performance Results
Random Reads IOPS
29,400
Random Writes IOPS
19,700
Random Mix 60/40
24,600
IOPS
Sequential Reads MB/s
3,100
Sequential Writes MB/s
1,500
MSA 1040 RAID 5 Performance Results
Random Reads IOPS
29,000
Random Writes IOPS
10,500
Random Mix 60/40
16,000
IOPS
Sequential Reads MB/s
3,100
Sequential Writes MB/s
2,000
MSA 1040 RAID 6 Performance Results
HP MSA 1040
10GbE Controller1
10GbE
iSCSI
HP MSA 1040
1GbE Controller2
1GbE
iSCSI
29,200
19,700
23,500
28,900
18,500
22,400
2,500
1,500
440
420
28,800
10,400
16,000
28,600
9,900
14,900
2,500
1,900
440
430
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 5
QuickSpecs
HP MSA 1040 Storage
Family Information
Random Reads IOPS
Random Writes IOPS
Random Mix 60/40
IOPS
Sequential Reads MB/s
Sequential Writes MB/s
29,000
8,200
12,500
28,800
8,100
12,500
28,500
7,300
11,300
3,100
1,900
2,500
1,800
440
380
1). For MSA 1040 8Gb FC and MSA 1040 10GbE iSCSI results, 300 GB 15K SAS drives were used in a dual
controller configuration of 8 vdisks consisting of twelve disks per vdisk, 3.3 TB volumes, and 2 volumes per
host. 4 hosts directly attached to the HP MSA 1040 8Gb FC and MSA 1040 10GbE iSCSI arrays were used in
this test configuration (results cannot be expected with a single host).
2). For the MSA 1040 1GbE iSCSI results, 146GB 15K SAS drives were used in a dual controller configuration
of 8 vdisks consisting of twelve disks per vdisk, 3.3 TB volumes, and 2 volumes per host. 4 hosts directly
attached to the HP MSA 1040 1GbE iSCSI array were used in this test configuration (results cannot be
expected with a single host).
NOTE: MSA 1040 tests with 1GbE iSCSI used 4 hosts directly attached to the HP MSA 1040 array.
- Sequential tests results were achieved with 256K block sizes and random tests were based on 8K block
sizes.
NOTE: For sequential workloads with a queue depth greater than 1, each sequential stream is targeted to
operate on a separate LBA range. Other types of sequential workloads that target specific LBA ranges may
achieve higher results.
- All Fibre Channel results were measured using 16Gb FC Host Bus Adapters running at 8Gb. All 10GbE iSCSI
results were measured using 10Gb iSCSI Host Bus Adapters. All 1GbE iSCSI results were measured using 1Gb
network interface controllers (NICs).
NOTE: Number and type of applications, drive type and number of drives, operating system used, and the
number of hosts will affect overall performance. This table is provided strictly as a test-lab comparison.
Configuration and
Management Tools
NOTE: These numbers reflect a full array configuration with the maximum number of front-end ports, disks,
and controllers. The test results shown for the HP MSA 1040 are designed to give a conservative reference
point for comparisons.
HP Storage Management Utility (SMU). Management access, out-of-band: WEB GUI, CLI. Interface Types:
USB, 100/1000 Ethernet. Protocols Supported SNMP, SMI-S, SSL, SSH, SMTP, FTP, HTTP, Telnet
Hot Plug Expansion and All MSA 1040 models support hot plug expansion and replacement of redundant controllers, enclosures,
fans, power supplies, and I/O modules for simple, fast installation and maintenance. Hot add expansion of
Replacement Support
disk enclosures is also supported.
Snapshot and Clone
All MSA 1040 arrays come standard with 64 snaps, 512 snaps available. This controller based functionality
offers higher levels of data protection, enables an almost instant recovery from data failure or corruption
and offers alternative development testing of 'offline' production data and the ability to backup
snapped/cloned data.
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 6
QuickSpecs
HP MSA 1040 Storage
Family Information
Overview
Server Compatibility
NOTE: depends on protocol
The MSA 1040 arrays come integrated with web browser and CLI based software for storage and RAID
management, setup, configuration, and troubleshooting. This reduces the cost of ownership by reducing
the training and technical expertise necessary to install and maintain your HP storage solution.
The SPOCK database provides interoperability information for thousands of components and millions of
component combinations. It is available to all users at: http://www.hp.com/storage/spock.
Supports most HP ProLiant and BladeSystems including
HP ProLiant DL, ML
HP c-Class Blade Servers
Compatibility must be confirmed at: http://www.hp.com/storage/spock
Industry Standard servers
Supports most multi-vendor industry standard servers. HP requires the Third-Party Server to be
logo'd and listed on the Microsoft Windows Server Catalog.
support
Refer to the Microsoft website: http://www.microsoft.com/windows/catalog/server/
HP Storage Division recommends that the Third-Party Server Vendor is an active member of TSANet.
Refer to the TSANet website for details: www.tsanet.com
Non-HP servers will generally be supported if the HP storage stack is used. This includes supported
HP branded HBAs and drivers, and supported FC switches.
OS Support
Refer to the HP support statements for complete current OS version support:
http://www.hp.com/storage/spock
Web Browser support
Microsoft Windows Server 2012
Microsoft Windows Server 2008 SP2
Microsoft Windows Server Hyper-V
VMware
Red Hat Linux
SuSE SLES
The MSA 1040 supports target based management, and includes a Web interface and a telnet
interface, and require a web browser for management.
The MSA 1040 requires Microsoft Internet Explorer, Mozilla Firefox, and Google Chrome.
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 7
QuickSpecs
HP MSA 1040 Storage
Optional Software
HP Insight Control
Storage Module for
vCenter
HP Insight Control Storage Module for vCenter
HP Insight Control Storage Module for vCenter is a component within the HP Insight Control plug-in for
vCenter. It provides VMware administrators that are using VMware's vSphere management console (vCenter)
with the ability to see how virtual machines are mapped to datastores and individual MSA Storage volumes.
By providing these clear relationships between VM's, datastores and storage, the VMware administrator's
productivity increases, as does the ability to ensure quality of service. Roles for administrators can be
defined on an individual basis, providing the ability to apply specific permissions for both view and control
functions.
The HP Insight Control Storage Module for vCenter supports mixed array environments including MSA
Storage, P2000, EVA, StoreVirtual Appliances, and the XP array series including the P9500.
When deployed with the MSA Storage array, HP Insight Control Storage Module provides the following:
Active Management functionality for the MSA 1040 array:
Create/Expand/Delete a Datastore
Create a Virtual Machine from a template
Clone VM/Datastore
Monitors the health and status of the MSA 1040
Displays LUN / volume connections from VMs and ESX servers to the arrays and provides the location
and attributes of the MSA 1040 within the SAN
Identifies what storage features are available to allow administrators to match the features available
on the MSA 1040 to their requirements
Provide a cluster-level view of the storage
HP Insight Control Storage Module for vCenter is downloadable from Software Depot:
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVPR
For complete software requirements and compatibility lists, refer to the product documentation below and
the HP SPOCK website: http://www.hp.com/storage/spock
For more information on HP Insight Control Storage Module for vCenter visit: www.hp.com/go/vmware
vStorage API for Array The vStorage API for Array Integration (VAAI) is one of the storage application programming interface (API)
sets in vSphere. VAAI is an API storage partners can leverage to enhance performance of virtual machine (VM)
Integration (VAAI)
management operations by delegating these operations to the storage array. With hardware offload,
ESX/ESXi hosts perform certain operations faster and consume less server CPU and memory resources, and
also storage port and storage fabric bandwidth. VAAI includes high performance and scalable VM data path
primitives.
Storage Hardware Primitives for VAAI
Full Copy or Hardware Assisted Move
Block Zeroing or Hardware Assisted Zeroing
Hardware Assisted Locking or Atomic Test and Set (ATS)
Product Features
Snapshot and Volume
Copy Software for the Data Protection
MSA 1040
Snapshots create up to 512 point-in-time pictures of data
Volume Copies create up to 128 point-in-time copies of data
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 8
QuickSpecs
HP MSA 1040 Storage
Optional Software
Recovery is instant - revert data from any previous Snapshot or Volume Copy
Backup 'snapped' data to disk, virtual tape, or physical tape without a backup window
A 64 snapshot license and Volume Copy are included with all MSA 1040 models.
Support and updates are desired for bundled software functionalities (such as 64 LTU Snap and/or
Volume Copy etc. in the MSA 1040 products) a combination HW + SW support care pack must be
purchased.
HP does not provide warranty assistance for software products included with our base hardware
products. This would either be SupportPlus or SupportPlus24. The hardware warranty component of
these services is accounted for in the pricing of the SP and SP24 care packs.
Data Testing
HP MSA Remote Snap
Software
Product Features
Snap or clone data to test the performance of a software application on 'offline' production data.
Snap or clone data to test how a software patch or enhancement will function on 'offline' production
data.
MSA 1040 Snapshot and Clone:
All MSA 1040 models come STANDARD with 64 snapshots and Volume Copy software.
512 Snapshot option is also available for additional cost.
HP MSA 512-Snapshot Software LTU
TC462A
HP MSA 512-Snapshot Software E-LTU
TC462AAE
HP MSA Remote Snap Software is array based software that provides remote replication on the HP
MSA 1040 Array products. HP Remote Snap is a form of asynchronous replication which consists of
replication of block-level data from a volume on a local system to a volume that may be on the same
system or on a second independent system. This second system may be collocated with the first
system or may be located at a remote site.
HP Remote Snap functionality is based on existing Snapshot technology offered by HP MSA SAN Array
products. Snapshots are used to track the data to be replicated as well as to determine the differences
in data updated on the master volume, minimizing the amount of data to be transferred.
HP Remote Snap replication technology provides the ability to accomplish key data management and
protection capabilities. First, because Remote Snap uses snapshots as the underlying technology it
creates multiple local recovery points which can be used for such tasks as to complement daily
backups; second, replication provides the ability to access data in a remote site which could be used
for dispersed operations; and third but definitely not least important replication allows for business
continuance in the event of a failure on the primary site.
In order to perform a replication, a snapshot of the volume to be replicated is taken, creating a pointin-time image of the data. This point-in-time image is then replicated to the destination volume by
copying the data represented by the snapshot via a transport medium such as TCP/IP (iSCSI) or Fibre
Channel. The amount of data transferred is minimized though the use of snapshots whenever
possible.
HP MSA Remote Snap Software LTU
TC463A
HP MSA Remote Snap Software E-LTU
TC463AAE
(NOTE: One license per array is required for replication. For example, if you have
two MSA arrays performing replication (from Primary system to Remote System),
you will need 2 licenses).
Storage based asynchronous snapshot replication
Initial copy of data can be performed locally, reducing burden on wide area networks
Support of both Ethernet and Fiber Channel interconnects provides flexible options to the application
environments.
Snapshot based replication technology means only changed data will be replicated to alternate site
Many to 1 replication (up to 4 nodes) - primary use case is to replicate from "many" branch offices to
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 9
QuickSpecs
HP MSA 1040 Storage
Optional Software
the home office for the purpose of backing up data from the branches
Single controller to single controller replication
Advanced scheduler provides several options to IT administrators for business continuance
Flexible architecture allows remote replication between MSA 1040 and/or MSA 2040/ P2000 G3
supported arrays. Protects existing investments and enhances business continuity planning
objectives.
Replication Wizard simplifies the task of setting up and establishing replication pairs from one unified,
easy to use GUI.
Snapshot based replication enables both local and remote recovery depending on the need. Snapshot
replication isolates problems to a specific point in time which can be selected by the administrator.
Additionally snapshot replication supports longer distance replication.
Multiple relationships provide greater storage flexibility and utilization.
Bundled 64 Snapshots and Volume Copy integration provides better efficiencies by combining the
management and array technologies to create local copies.
Fast application recovery with minimal or no transaction loss
Creation of disaster tolerant copies of your critical business data
No-single-point-of-failure solution to increase the availability of your customers data
Customer Benefits
Disaster Recovery
Replication technology has typically been used to address disaster recovery issues. Disaster recovery is still
the driving business case behind replication. Remote replication can be implemented from the production site
to one or more remote sites across a campus, across town, across a state or across the country. When a
disaster strikes the primary location, the applications can be brought up at the remote site and continue
processing against the replicated copies. When the primary site is back online, the replication can be reversed
and when the data is resynchronized, processing can be switched back to the primary site and business can
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 10
QuickSpecs
HP MSA 1040 Storage
Optional Software
continue. In the past, if an e-mail system experienced a disaster it was an "oh well" moment. The loss of a
day or more of e-mail was not considered important. Today, e-mail is a critical component of many
companies' business plans and recovering e-mail after a disaster quickly and completely is required.
Maintenance
HP Remote Snap software can also be used to solve other business needs. For instance, E-mail servers may
need periodic maintenance that can take hours to complete. With remote replication in place, the downtime
can be minimal (as long as it takes to bring the remote peer of the primary e-mail server online). The primary
server can be worked on (patches, hardware upgrades, etc.) and then brought back online and into
production. A whole datacenter can be failed over to a remote site on purpose to perform maintenance on
generators, air conditioning, etc. Replication can also be used to perform a datacenter move with minimal
downtime (fail everything to the DR site, move the production datacenter to its new location then fail the DR
site back to the new datacenter).
Storage Based
Data replication is performed at the storage subsystem controller level and is totally transparent to the host,
alleviating unnecessary host cycles to perform the data mirroring functions. Unlike a fabric based or host
based solution, the storage based solution dedicates its resources to managing the replication process
between arrays, with minimal impact to applications, other data or devices on the SAN.
Bi-Directional
The bidirectional HP MSA 1040 Array solution addresses the growing need among businesses to ensure
continuous availability of applications that are critical to daily business operations. HP MSA 1040 enables two
sites in a remote replication connection to use each other as a destination to maintain replicated copies of
online data. This maximizes resource utilization while enabling business continuance, even in the event of
disaster.
Disaster Tolerance
The MSA 1040 Arrays utilize snapshot data online and in real time to a remote MSA 1040 through a local or
extended storage area network (SAN). Additionally, data replication can be bidirectional, meaning that a
storage array can be both a source and a destination. A particular LUN can be replicated in only one direction
between the two storage arrays. Write I/O data sent to the source is replicated by HP MSA 1040 Array to the
destination. A pair of properly configured HP MSA 1040 arrays is a replication solution that guarantees data
integrity in the event of a storage system or site failure.
First initial copy
When a DR site is initially created a initial copy of the data from the source volume to the target volume must
occur. The MSA 1040 array allows this first copy to take place locally. After completion the disks can me
manually moved to the remote location. Subsequent changes will only remotely copy the changed blocks.
SAN Extensions
Path failover (MPIO)
HP StoreEasy 3000
Gateway Storage
HP MSA 1040 Array provides the capability to replicate data over direct Fibre Channel. The distances
supported over dark fiber are determined by the speed of the dark fiber connection and the technology used
to communicate over the dark fiber.
Multipath failover (MPIO) is supported on all operating systems
Add more value to your MSA 1040 array
HP MSA 1040 combined with HP StoreEasy 3830 Gateway Storage or StoreEasy 3830 Gateway Storage Blade
enables you to consolidate block and file storage onto a single, high-performance system - giving your
business the flexibility to meet changing business needs on-demand.
HP StoreEasy 3830 Storage delivers efficient, secure, and highly available file services that help address your
changing file-serving needs. It reduces your cost of ownership by simplifying management, increasing
resource utilization, centralizing growth, and protecting data. HP StoreEasy 3830 Storage leverages the
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 11
QuickSpecs
HP MSA 1040 Storage
Optional Software
Server Manager capabilities in Microsoft Windows Storage Server 2012 to provide a simple and consistent
experience for managing block and file storage for multiple workloads centrally.
HP StoreEasy 3830 Gateway Storage - B7E00A
HP StoreEasy 3830 Gateway Storage Blade - B7E01A
NOTE: For more information visit: www.hp.com/go/StoreEasy
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 12
QuickSpecs
HP MSA 1040 Storage
Service and Support, HP Care Pack, and Warranty Information
Warranty
Three-year limited warranty, parts exchange Next Business day delivery
Enclosures, Hard drives, and Options for the MSA 1040 carry their own warranty. Refer to HP's Limited
Warranty Statement for more information.
The MSA 1040 has been designed with customer self-repairable parts to minimize repair time and provide
greater flexibility in performing defective parts replacement. Please refer to HP's limited warranty
Statement and parts replacement instructions for further details.
http://h18006.www1.hp.com/products/storageworks/warranty.html
Products included in various kits carry their own individual warranties.
NOTE: The warranty of the hard drive options purchased with the MSA 1040 models is different for SAS
hard drives versus SAS MDL. SAS hard drive options have a three year warranty and SAS MDL.
Service and Support
Services to accelerate time to results
HP Storage Services bring you a rich portfolio of consulting and support services designed to add value to
our core storage products and solutions. We have the know-how and experience to put storage technology
to work for you. We work closely with you as your strategic partner, leveraging our full services portfolio
to make sure that everything works to optimize your enterprise.
Choose from services aligned to our storage product offerings and lifecycle. From mission-critical onsite
services to innovative web-based remote support, you choose the precise level of attention and support
your business demands.
Discover, plan, and design Choose from a rich portfolio of services to make the most of HP MSA1040 Storage, so you can efficiently
and affordably consolidate, manage, and extract value from unstructured data.
Start here to understand your data protection options. Next, develop a methodical plan and design
the optimal HP MSA 1040 SAN Storage that addresses your unique technology requirements.
HP Backup Recovery Efficiency Analysis - Assessment of how efficiently backup components are being
used as the amount of data to be backed up continues to grow exponentially via analysis intelligence and a
snapshot of your current backup environment. http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA38490ENW.pdf
HP Backup Recovery Impact Analysis - Focus placed on service requirements and design as the key to
success for gaining a clear understanding of the role of increasingly diverse data protection strategies.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-1175ENW.pdf
HP Backup Recovery Modernization - Initial discovery, interviews, reference architecture design, proposal
content development, vendor grading, and final recommendations carried out so as to require minimal
resources and locations on your part.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-1199ENW.pdf
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 13
QuickSpecs
HP MSA 1040 Storage
Service and Support, HP Care Pack, and Warranty Information
Deploy and integrate
Implement HP MSA 2010 SAN Storage, correctly-right from the start-so you can count on reduced risk
and accelerated deployment, while implementing a best-practice configuration from day one.
HP MSA/P2000 Family Disk Array Installation and Startup Service - Implement right from the start, as
HP experts install, test, and configure your hardware and software onsite. We deliver a tailored storage
deployment properly integrated into your environment.
HP Storage Data Migration Service - End-to-end data migration service providing seamless discovery,
assessment, planning, and design, completely customizable to your organization's storage area network
(SAN) or network attached storage (NAS) environment and using innovative software to help you migrate
to HP storage quickly and efficiently
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-0774ENW.pdf
HP Storage and Data Consultant Residency Services - Strategically augment your current storage and
backup environment with HP resources who become your trusted advisors.
HP Proactive Select - A flexible way to purchase services to fit your environment with an extensive menu
of HP Proactive Select event and technical services, such as onsite firmware upgrades, health checks,
assessments, and education
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENW.pdf
Operate and support
Choose the right support to maximize uptime, free up your resources, and achieve improved value-as
you get the most out of the existing IT assets while accelerating time-to-revenue.
HP Proactive Care 24x7 - Hardware and software support services designed specifically for your
technology with rapid access to Advanced Solution Centre Specialists plus firmware and software
management and best practice advice
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855ENW.pdf
HP Proactive Care Personalized Support - An option-if you have HP Proactive Care- to bring increased
personalization of the Proactive Care support experience through the assignment of an Account Service
Manager (ASM) who provides IT best practice advice to help address IT issues and projects.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-3446ENW.pdf
HP Support Plus 24 - Support for environments where proactive help from HP is not required, with 24x7
hardware and software support onsite that includes third-party support with a maximum four-hour onsite
response.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6638EN.pdf
HP Education Services - Comprehensive training for new, as well as experienced, storage administrators
designed to expand your skills and keep you up to speed with the latest storage and virtualization
technology from HP Storage.
http://education.hp.com/curr-storsan.htm
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 14
QuickSpecs
HP MSA 1040 Storage
Service and Support, HP Care Pack, and Warranty Information
Optimized Care- delivers Choose from three levels of operate and support care
best performance and
stability through
HP Proactive Care 24x7-Plus, 20 credits per year per array
deployment and proactive
management practices
Additional options - HP Proactive Care Personalized Support (once per Proactive Care support new
environment), an additional day of HP Personalized Support, and 10 additional HP Proactive Select credits
per year, per array
Standard Care-maintains
high level of uptime, along
with expert help to cut the
cost and complexity of
implementation and
support
HP Proactive Care 24x7-Plus, 10 credits per year per array
Basic Care-Minimum
recommended support
HP Support Plus 24 - plus 10 HP Proactive Select credits per year, per array
Additional options - HP Proactive Care Personalized Support (once per Proactive Care support new
environment), an additional day of HP Personalized Support, and 10 additional HP Proactive Select credits
per year, per array
Additional options - 10 Proactive Select Credits per Year
Remote
Support Automation
HP Insight Remote Support-Available at no additional cost to all warranty, HP Care Pack Service and
service agreement customers, uses proven technology to deliver secure, reliable 24x7 remote monitoring,
diagnosis and problem resolution.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-4676ENW.pdf
http://h18004.www1.hp.com/products/servers/management/insight-remote-support/
overview.html
For more information
www.hp.com/services/storage
To learn more on HP Storage Services, please contact your HP sales representative or HP Authorized
Channel Partner
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
Services for customers purchasing from HP or an enterprise reseller are quoted using HP order
configuration tools.
Customers purchasing from a commercial reseller can find HP Care Pack Services at:
www.hp.com/go/lookuptool
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 15
QuickSpecs
HP MSA 1040 Storage
Configuration Information
Configure to Order Program Information
HP has a very successful Configure to Order program for the MSA 1040 family. The MSA 1040 models and options may be factory
installed in a rack with switches, MSA 2040 disk enclosures and hard drives. The MSA 1040 arrays may be integrated with ProLiant
servers or as standalone storage.
Orders to be shipped through the CTO process must have a minimum of four drives of the same type ( SAS or SAS MDL).
Step 1 - MSA 1040 - Base Configuration
Select one model:
Model Name
SKUs
HP MSA 1040 2-port Fibre Channel Dual Controller LFF Storage
(Includes LFF Array Chassis + two MSA 1040 FC 2-port controllers, SFPs installed, drives not included)
HP MSA 1040 2-port Fibre Channel Dual Controller SFF Storage
(Includes SFF Array Chassis + two MSA 1040 FC 2-port controllers, SFPs installed, drives not included)
HP MSA 1040 2-port 1GbE iSCSI Dual Controller LFF Storage
(Includes LFF Array Chassis + two MSA 1040 1GbE 2-port controllers, SFPs installed, drives not included)
HP MSA 1040 2-port 1GbE iSCSI Dual Controller SFF Storage
(Includes SFF Array Chassis + two MSA 1040 1GbE 2-port controllers, SFPs installed, drives not included)
HP MSA 1040 2-port 10GbE Dual Controller LFF Storage
(Includes LFF Array Chassis + two MSA 1040 10GbE 2-port controllers, SFPs installed, drives not included)
Direct attached copper cables are supported in 10GbE Controller systems
HP MSA 1040 2-port 10GbE Dual Controller SFF Storage
(Includes SFF Array Chassis + two MSA 1040 10GbE 2-port controllers, SFPs installed, drives not included)
Direct attached copper cables are supported in 10GbE Controller systems
E7V99A
E7W00A
E7W01A
E7W02A
E7W03A
E7W04A
Step 2 - Options
Select each option with quantities specified.
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 16
QuickSpecs
HP MSA 1040 Storage
Configuration Information
Step 2a - SAS or SAS MDL Drive Options
SKUs
HP MSA 1040 Arrays support both the HP ProLiant Server SFF Hard Disk Drives and HP MSA SFF Hard Disk Drives
NOTE: SAS MDL drives are designed for archival or reference data. They should not be used in a heavy or intense I/O
environment. Those situations require the use of enterprise-class SAS drives. MSA 3.5-inch or 2.5-inch drives are for
use only with MSA arrays and supported Disk Enclosures.
MSA 1040 Drives:
SAS Drives (SFF 2.5-inch)
HP MSA 146GB 6G SAS 15K 2.5-inch Dual Port Enterprise 3yr Warranty Hard Drive
HP MSA 300GB 6G SAS 15K 2.5-inch Dual Port Enterprise 3yr Warranty Hard Drive
HP MSA 300GB 6G SAS 10K 2.5-inch Dual Port Enterprise 3yr Warranty Hard Drive
HP MSA 450GB 6G SAS 10K 2.5-inch Dual Port Enterprise 3yr Warranty Hard Drive
E2D54A
C8S61A
E2D55A
E2D56A
HP MSA 600GB 6G SAS 10K 2.5-inch Dual Port Enterprise 3yr Warranty Hard Drive
HP MSA 900GB 6G SAS 10K 2.5-inch Dual Port Enterprise 3yr Warranty Hard Drive
HP MSA 1TB 6G SAS 7.2K 2.5-inch Dual Port Midline 1yr Warranty Hard Drive
HP MSA 1.2TB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
MSA Large Form Factor (LFF) SAS MDL DP drives for MSA 1040 Array and MSA 2040 3.5-inch Disk Enclosure
C8S58A
C8S59A
C8S62A
E7W47A
HP P2000 1TB 6G SAS 7.2K LFF (3.5-inch) Dual Port MDL Hard Drive
HP P2000 2TB 6G SAS 7.2K LFF (3.5-inch) Dual Port MDL Hard Drive
HP P2000 3TB 6G SAS 7.2K rpm (3.5-inch) Midline 1yr Warranty Hard Drive
HP MSA 4TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
MSA Large Form Factor (LFF) SAS DP drives for MSA 1040 Array and MSA 2040 3.5-inch Disk Enclosure
AP861A
AW555A
QK703A
C8R26A
HP P2000 300GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive
HP P2000 450GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive
HP P2000 600GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive
HP ProLiant Server SAS & SATA Drives (SFF 2.5-inch):
AP858A
AP859A
AP860A
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3yr Warranty Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
DA - 14884 EMEA — Version 2 — April 14, 2014
507127-B21
627117-B21
512547-B21
581284-B21
619291-B21
718160-B21
605835-B21
Page 17
QuickSpecs
HP MSA 1040 Storage
Configuration Information
Step 2b - Drive Enclosure Options
MSA 2040 LFF Disk Enclosure
Rear Panel components
1.
2.
3.
Power Indicator
Fault Indicator
Unit Locator
4.
5.
SAS In Port
SAS Out Port
HP D2700 SFF Disk Enclosure
Rear Panel components
1.
2.
3.
4.
5.
Power Supply 1
Power Supply 2
Fan 1
I/O Module A
I/O Module B
6.
7.
8.
9.
Fan 2
Rear UID push button
Enclosure LEDs
Power on/standby button
Use either disk enclosure with Large or Small Form Factor, single or dual controller array heads. Each ships with two .5m mini-SAS to
mini-SAS cables.
HP MSA 2040 LFF Disk Enclosure
HP D2700 Disk Enclosure
C8R18A
AJ941A
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 18
QuickSpecs
HP MSA 1040 Storage
Configuration Information
Step 2c - SAS Cable Options
miniSAS to miniSAS Cables:
Connecting MSA 1040 Controller to a disk enclosure where a longer cable is desired.
HP External Mini SAS 1m Cable ALL
HP External Mini SAS 2m Cable
407337-B21
407339-B21
Step 3 - Other MSA 1040 Options
Choose optional AC Power Cords (2 required)
NOTE: Two PDU cables: one 142263-008 (Black) and one 1422633-013 (Grey), ship standard with all AC-powered enclosures.
HP ProLiant 12 ft Power Cord
Power Cord, (Australia/China/New Zealand)
Power Cord, (Central Europe)
Power Cord, (United Kingdom/Hong Kong)
Power Cord, (Switzerland)
Power Cord, (Italy)
Power Cord, (Denmark)
Power Cord, (Japan)
Power Cord, (South East Asia/India)
227099-001
227098-001
157215-001
157216-001
157219-001
157217-001
157218-001
139867-001
157220-001
Step 4a - Choose Supported Options For Fibre Channel Infrastructure
Fibre Channel
Host Bus Adapters
MSA 1040 8Gb FC configurations can be connected to 16Gb FC infrastructure as switches will
auto-negotiate to 8Gb speed. MSA 1040 controller do not support 16Gb FC SFPs. See MSA 2040
for native 16Gb FC connectivity.
Model
C-class HBA
SKUs
HP QMH2572 8Gb Fibre Channel Host Bus Adapter for BladeSystem c-Class
HP LPe1205A 8Gb Fibre Channel Host Bus Adapter for BladeSystem c-Class
FC switches
651281-B21
659818-B21
HP SN8000B Family (16Gb)
HP SN3000B Fibre Channel Switch (16Gb)
HP SN6000B Fibre Channel Switch (16Gb)
HP StoreFabric SN6500B 16Gb 96/96 Power Pack+ FC Switch
HP StoreFabric SN6500B 16Gb 96/96 FC Switch
HP StoreFabric SN6500B 16Gb 96/48 Power Pack+ FC Switch
HP StoreFabric SN6500B 16Gb 96/48 FC Switch
BladeSystem c-Class Fibre Channel Mezzanine HBAs
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
DA - 14884 EMEA — Version 2 — April 14, 2014
451871-B21
456972-B21
Page 19
QuickSpecs
HP MSA 1040 Storage
Configuration Information
Fibre Channel HBAs
NOTE: Please visit www.hp.com/go/fchba for product details and www.hp.com/storage/spock
for compatibility details.
Emulex Fibre Channel HBAs
Fibre Channel
Switches
PremierFlexOM4
HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
QLogic Fibre Channel HBAs
AJ762B
AJ763B
HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AK344A
AJ764A
HP 8/20q FC 8-ports Active Switch
HP 8/20q FC 16-ports Active Switch
HP 8/8 Base (0) e-port SAN Switch
HP 8/8 (8) Full Fabric Ports Enabled SAN Switch
HP 8/24 Base (16) Full Fabric Ports Enabled SAN Switch
HP 8/80 Power Pack+ (48) Full Fabric Ports Enabled SAN Switch
HP 8/80 Base (48) Full Fabric Ports Enabled SAN Switch
HP 1606 FCIP 16-pt Enabled 8Gb FC 6-pt Enabled 1GbE Power Pack+ Switch
HP 1606 FCIP 16-pt Enabled 8Gb FC 6-pt Enabled 1GbE Full Switch
HP 1606 FCIP 4-pt Enabled 8Gb FC 2-pt Enabled 1GbE Base Switch
HP 2408 FCoE 24-pt 10GbE 8-pt 8Gb FC Base Converged Network Switch
HP 2408 FCoE 24-10GbE 8-8Gb FC Power Pack+ Converged Network Switch
Brocade 8/12c SAN Switch for BladeSystem c-Class
Brocade 8/24c SAN Switch for BladeSystem c-Class
Brocade 8/24c Power Pack+ SAN Switch for BladeSystem c-Class
HP SN6000 Stackable 8Gb 24-port Single Power Fibre Channel Switch
NOTE: 20 device ports active/4 stacking (ISL) ports active
AQ233B
AK242B
AM866B
AM867B
AM868B
AM872B
AM871B
AP864B
AP863B
AP862B
AP801B
AP802B
AJ820B
AJ821B
AJ822B
AW575B
HP SN6000 Stackable 8Gb 24-port Dual Power Fibre Channel Switch
NOTE: 20 device ports active/4 stacking (ISL) ports active
AW576B
HP SN6000 Stackable 12-port Single Power FC Switch
NOTE: 8 device ports/4 stacking (ISL) ports active, upgradeable to 20 device ports active
BK780B
Cisco MDS 9124 8-ports Active Fabric Switch
Cisco MDS 9124 16-ports Active Fabric Switch
HP MDS 9124 24-ports Active Fabric Switch
Cisco MDS 8/12c Fabric Switch for HP BladeSystem c-Class
Cisco MDS 8/24c Fabric Switch for HP BladeSystem c-Class
Cisco MDS 9222i Multiservice with 0 SFP Transceiver Modular Fabric Switch
HP SN6000C 8Gb 16-port Fibre Channel Switch
HP SN6000C 8Gb 32-port Fibre Channel Switch
AG646A
AG647A
AG648A
AW563A
AW564A
AG851B
AW585A
AW586A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
QK732A
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 20
QuickSpecs
HP MSA 1040 Storage
Configuration Information
type cables
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
OM3 FC LC-LC cables HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
QK733A
QK734A
QK735A
QK736A
QK737A
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
Step 4b - Choose Supported Options For 10GbE Infrastructure
- verify that the cable/transceiver is supported with the connecting device (i.e. switch or NIC/iSCSI HBA)
NOTE: Direct attached copper cables are supported in 10GbE Controller systems
Copper Cable
HP BladeSystem c-Class Small Form-Factor Pluggable .5m 10GbE Copper Cable
HP BladeSystem c-Class Small Form-Factor Pluggable 1m 10GbE Copper Cable
HP BladeSystem c-Class Small Form-Factor Pluggable 3m 10GbE Copper Cable
HP BladeSystem c-Class Small Form-Factor Pluggable 5m 10GbE Copper Cable
HP BladeSystem c-Class Small Form-Factor Pluggable 7m 10GbE Copper Cable
DAC Cable
HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
iSCSI Adapters
NOTE: OS Specific software iSCSI initiators are supported on NICs which conform to the IEEE
Ethernet Standards. Review SPOCK for any changes to the hardware iSCSI adapters which are
supported: http://www.hp.com/storage/spock
DA - 14884 EMEA — Version 2 — April 14, 2014
487649-B21
487652-B21
487655-B21
537963-B21
487658-B21
J9281B
J9283B
J9285B
JD095C
JD096C
JD097C
JG081C
JC784C
Page 21
QuickSpecs
HP MSA 1040 Storage
Configuration Information
Step 5 - Choose Rack Options
Please refer to the HP Infrastructure products page for more information on HP racks and rack options or the HP 10000 G2 Series Rack
QuickSpec.
http://h18004.www1.hp.com/products/servers/platforms/rackandpower.html
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 22
QuickSpecs
HP MSA 1040 Storage
Technical Specifications
MSA 1040
POWER REQUIREMENTS
Input Power Requirements 110VAC 3.20A, 343W; 220VAC 1.67A,337W
(typical-running I/O)
SFF/LFF arrays
Max Input Power
100-240 VAC, 50/60 Hz., 4.20-1.77A; 48-60 VDC 9.4A/7.5A
Heat Dissipation
1174 BTU/hr
TEMPERATURE AND HUMIDITY RANGES
Operating Temperature
Shipping Temperature
Operating Humidity
41°F to 104°F (5°C to 40°C)
-40°F to 158°F (-40°C to 70°C)
10% to 90% RH @ 104°F (40°C) non-condensing
Non-Operating Humidity Up to 93% RH @ 104°F (40°C)
DECLARED ACOUSTIC NOISE LEVELS
Sound Power
Sound Pressure
SHOCK AND VIBRATION
A weighted sound power LWAd=6,75 B
A weighted sound pressure LpAm - 55dB
Shock, Operational
Shock, Non-Operational
Vibration, Operational
Vibration, Non-Operational
PHYSICAL
3G's for 11 milliseconds
Per NEBS GR-63-CORE UNPACKAGED EQUIPMENT SHOCK CRITERIA (4.3.2)
5-500Hz, 0.14 Grms shaped
3-365-3Hz, 1.22 Grms,z-axis,0.85 Grms, X&Y axis shaped spectrum
Height
Depth (excluding cables)
(back of ear to back of
controller handle)
Width (body only)
Chassis Weight
(no controllers)
3.5 in/ 8.9 cm
MSA 1040 SFF 24-bay array: 19.5 in / 49.5 cm
MSA 1040 LFF 12-bay array: 22.5in. / 57.2 cm
17.6 in / 44.7 cm (w/ ears 19 in / 48.26 cm)
MSA 1040 LFF chassis: 31 lbs. (DC-pwr model: 32.6 lbs)
MSA 1040 SFF chassis: 29.1 lbs (DC-pwr model: 30.7lbs)
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 23
QuickSpecs
HP MSA 1040 Storage
Technical Specifications
MSA 1040 Controllers:
User Interface
RAID Support
Cache Memory
MSA 1040
Regulatory Info
Status and activity provided via management interfaces. Status Indicators on
front of Controller
0, 1, 3, 5, 6, 10, 50
Cache Backup
4GB Read/Write. ECC protection with backup to Flash memory (indefinite
backup)
ECC protection with back up to flash memory (indefinite backup)
Upgradeable Firmware
yes
Disk Drive and Enclosure
Protocol Support
6 Gb SAS - Serial Attached SCSI
Host Ports
Expansion Port
2 x 8Gb Fibre Channel per controller
2 x 1GbE iSCSI per controller
2 x 10GbE iSCSI per controller
SAS (SFF8088) 4x lane 6 Gb SAS
Weight, controller
MSA 1040 Controllers 4.8 lbs.
Safety
UL 60950-1 (USA)
CAN/CSA-C22.2 No.60950-1-03 (Canada)
EN 60950-1 (European Union)
GS mark (Germany)
IEC 60950-1 (International)
CCC Mark (power supply only, China PRC)
VCCI:2008-04 Class A (Japan)
FCC 15:109(g) Class A (USA)
ICES-003:2004 Class A (Canada)
EN55022 : (European Union Class A); CISPR 22 (International Class A)
EN61000-3-2 : (Harmonics) (European Union)
EN61000-3-3 : (Flicker) (European Union)
EN 55024 (European Union, Immunity, Class A);CISPR 24 (International
Immunity, Class A)
AS/NZS CISPR 22, Class A (Australia, New Zealand)
CNS 13438 Taiwan, Class A (Taiwan)
KN22 Class A (Emissions Class A); KN24 (Immunity) (S Korea)
RoHS-6/6 Compliance, China RoHS, WEEE
Electromagnetic
Compatibility
RoHS and WEEE
Country Approvals
United States ,Australia/New Zealand, Canada, China (PRC), European Union,
Germany (GS Mark), Japan, South Korea, Taiwan
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 24
QuickSpecs
HP MSA 1040 Storage
Technical Specifications
© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel
Corporation. Unix is a registered trademark of The Open Group.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
DA - 14884 EMEA — Version 2 — April 14, 2014
Page 25
Download PDF
Similar pages