SC-LX86
9.2-Channel AV Receiver Featuring Hi-bit32 Audio Signal Processing, AIR Studios
Monitor Certification, THX® Ultra2 Plus Certification, 4K Pass Through, and Low
Leakage Flux Power Transformer
AMPLIFICATION
VIDEO FEATURES
› › Channels: 9
› › 4K Pass Through
› › Amplification Type: Class D 3 (Direct Energy HD)
› › 3D Ready (Blu-ray Disc ® , Broadcast and Games)
› › 810 W Multi ch Simultaneous Drive (1 kHz, THD 1 % @ 8 ohms)
› › Deep Colour (36-bit) and x.v.Colour
› › 250 W/ch (1 kHz, THD 1 % @ 4 ohms)
› › 1080p/24fps Scaler with Qdeo™
› › 190 W/ch (1 kHz, THD 1 % @ 6 ohms)
› › Triple HD Noise Reduction
› › 140 W/ch (1 kHz, THD 0.08 % @ 8 ohms)
› › Advanced Video Adjustment
CONSTRUCTION DESIGN
› › Advanced Direct Construction
› › Rigid Trans-Stabilizer
› › Stream Smoother/Stream Smoother Link
› › Frame Rate Conversion (60i/p
HOME NETWORK FEATURES
› › Insulated Dual Chassis
› › AirPlay Wireless Audio
› › 3D Space Frame Construction
› › DLNA Certified ® (1.5)
› › Low Leakage Flux Power Transformer
› › Compatible with Windows 7
AUDIO FEATURES
› › AIR Studios Monitor Certification
› › THX ® Ultra2 Plus Certified
› › Dolby ® TrueHD/Dolby Pro Logic IIz/Dolby Digital Plus
24p)
› › Music File Playback via LAN/USB (WAV, MP3, WMA, AAC, FLAC)
• 192 kHz/24-bit Music File Playback (FLAC/WAV)
› › Internet Radio with vTuner
Convenience FEATURES
› › DTS-HD ® Master Audio/DTS-ES/DTS Neo:X
› › Digital Audio from iPod ® /iPhone ® /iPad ® via USB* 1
› › Digital Core Engine with Texas Instruments Aureus™ DSP
› › Android Audio & Video Playback (MHL) Compatible* 2
› › Hi-bit32 Audio Signal Processing/192 kHz/32-bit DAC
› › USB-DAC Mode 192 kHz/32-bit Music File Playback
› › HDMI ® Audio Return Channel
› › DSD File Playback via Front USB
› › Pioneer Advanced MCACC Room Calibration
› › iControlAV2012 Remote Control App Ready (iOS/Android)* 3
• 3D Time Axis Measurement
• Precision Distance/Polarity Check
• Automatic Crossover Setting
• Reverb Before and After Calibration Results (OSD or
AVNavigator)
• Standing Wave Control
› › Pioneer Sound Enhancements
• Full Band Phase Control/Auto Phase Control Plus
• PQLS Bit-stream/Multi-Surround/2 ch Audio
• Jitter Reduction
• Auto Sound Retriever/Auto Sound Retriever for ARC
• Sound Retriever AIR
• Sound Retriever Link
• Auto Level Control (Multi-Channel)
• Advanced Surround (15+1 Modes)
• Optimum Surround (Auto Bass, Dialog, and Surround
Balancing)
• AV Receiver and Blu-ray Disc Player Control from
Smartphone
• Sound Explorer
› › Air Jam App Ready (iOS/Android)* 4 (Optional AS-BT200 adapter
required)
• Share Music and Create Playlists via Bluetooth ®
Connection
› › Wireless LAN Converter (AS-WL300) included
› › Firmware Upgrade via Internet or USB
› › AVNavigator for Easy Wiring and Setup with PC or iPad
› › Graphic User Interface (GUI) with Album Artwork (HDMI only)
› › Auto Power Down
› › Power Save for HDMI Standby Through
› › AM/FM Tuner 63 Presets
› › Sleep Timer
› › Learning Remote Control (Illumination)
› › RF Remote Control (CU-RF100-U) Ready
• Virtual Speakers (Wide/Height/Surround Back)
• Virtual Depth
*1 Dedicated cable included
HDMI conversion cable included
*2 Micro USB
*3 Available for free download from App StoreSM/Google Play
SC-LX86
9.2-Channel AV Receiver Featuring Hi-bit32 Audio Signal Processing, AIR Studios
Monitor Certification, THX® Ultra2 Plus Certification, 4K Pass Through, and Low
Leakage Flux Power Transformer
CONNECTIONS
REAR PANEL
SC-LX86/SYXJ8
› › Phono (MM) 1 In
› › Digital Coaxial 2 In (assignable)
› › Digital Optical 2 In (assignable)/1 Out
FRONT TERMINALS
› › HDMI 1 In (assignable/MHL)
› › USB/iPod Video In
› › USB-DAC In (B-Type)
› › Monitor Component 1 Out/Monitor
Composite 1 Out
› › Preout 9.1 ch (11.2 ch terminals)
› › Phones 1 Out (shown on front page)
› › Multi-ch In (7.1 ch)
› › HDMI 7 In (6 assignable)/3 Out (1 for
zone 4)
› › Ethernet 1 In
› › ZONE 4 HDMI for Audio and Video
› › ZONE 3 AV (Composite), Volume and
Balance
› › Component Video 3 In (assignable)
› › MCACC Setup Mic In
REAR TERMINALS
ZONE FEATURES
› › ZONE 2 AV (Composite), Component,
Subwoofer, Volume, Balance and Tone
SPECIFICATIONS
› › Power Requirements: AC 220-230 V,
› › Speaker 11 ch Out (SB/FH/FW/B, FH or
FW/B assignable)
› › Bluetooth Adapter Port for AS-BT200
› › USB Charge Port for AS-WL300
Wireless Converter
50/60 Hz
› › Power Consumption: 370 W/0.1 W
(Standby)
› › Dimensions (W x H x D): 435 x 185 x
441 mm
› › Weight: 18.0 kg
› › AV (Composite) 4 In/1 Out
› › IR 2 In/1 Out
› › Audio 1 In (assignable)
› › 12 V Trigger x 2/RS-232C
INTEGRATED TECHNOLOGIES
PIONEER and the Pioneer logo are registered trademarks of Pioneer Corporation.
The impedances indicated are actual values that speakers can present to an amplifier while playing back
music. They do not refer to the nominal rated impedances of speakers you use.
THX and the THX logo are trademarks of THX Ltd. which are registered in some jurisdictions. All rights
reserved.
AIR STUDIOS and the AIR STUDIOS logo are registered trademarks of Air Studios, Inc.
"Qdeo", and "QuietVideo" are trademarks of Marvell or its affiliates.
Aureus is a trademark of Texas Instruments.
HDMI connection may not allow transmission of copyright protected material, depending on the capability
of the signal source.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
DTS is a registered trademark & the DTS logo and Symbol are trademarks of DTS, Inc.
The Bluetooth word mark and logo are registered trademarks and are owned by the Bluetooth SIG, Inc.
Bluetooth functionality requires a compatible A2DP profile Bluetooth enabled device.
Certain Bluetooth features may not be supported by all compatible Bluetooth-enabled devices, and/or the
functionality of such features may be limited in certain devices.
Windows and the Windows logo are trademarks of the Microsoft group of companies.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been
designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the
developer to meet Apple performance standards. Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod,
iPhone, or iPad may affect wireless performance.
Apple, AirPlay, iPhone, iPad, iPod and iPod touch are registered trademarks of Apple Inc., registered in the
U.S. and other countries. AirPlay works with iPhone 4S, iPhone 4, iPhone 3GS, iPod touch (2nd, 3rd and 4th
generations), iPad 2, iPad with iOS 4.2 or later, and iTunes 10.1 (Mac and PC) or later.
The AirPlay logo is a trademark of Apple Inc.
DLNA, the DLNA Logo and DLNA Certified are trademarks, service marks, or certification marks of the Digital
Living Network Alliance.
“x.v.Colour” is a trademark of Sony Corporation.
Android and Google Play are trademarks of Google Inc.
MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or registered trademarks of MHL LLC in
the United States and other countries.
vTuner is a registered trademark of Noting Else Matters Software, Ltd.
Phase Control is a trademark placed on a product with Pioneer's Phase Control Technology concept. The
technology enables high-grade sound reproduction environment by improving the phase matching for each
of the components.
For details on iPod compatibility, visit http://pioneer.jp/homeav/support/ios/eu/
© 2012 Pioneer Corporation. All rights reserved.
Note: Specifications and design subject to change without notice.
Download PDF
Similar pages