FCK008FCK016 INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS
FCK008
FCK016
Mount Connector
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
FCK008 / FCK016
FCK008 / FCK016
Installation Instructions
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT WARNINGS AND
CAUTIONS!
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
WARNING: Exceeding the weight capacity can result in
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located on wall mounts and accessories
attached to the wall mounts, does not exceed the weight
capacity specified for the wall mount.
LEGEND
Tighten Fastener
Loosen Fastener
Apretar elemento de fijación
Aflojar elemento de fijación
Befestigungsteil festziehen
Befestigungsteil lösen
Apertar fixador
Desapertar fixador
Serrare il fissaggio
Allentare il fissaggio
Bevestiging vastdraaien
Bevestiging losdraaien
Serrez les fixations
Desserrez les fixations
TOOLS and PARTS REQUIRED FOR INSTALLATION
A (2)
[FCK008 only]
B (2)
[FCK016 only]
2
Installation Instructions
FCK008 / FCK016
INSTALLATION
1.
Remove end caps from wall mount rails. (See Figure 1)
1
Wall mount
rail end caps
Figure 1
2.
Attach FCK008 or FCK016 (A or B) to the wall mount rails
and tighten. (See Figure 2)
3.
Attach wall mount to wall (if not already done) following
installation instructions included with the wall mount.
4.
Install accessories following installation instructions
included with accessories.
FUSION
Mount
FUSION
Mount
(A) or (B)
Figure 2
3
FCK008 / FCK016
Installation Instructions
USA/International
Europe
Chief Manufacturing, a products division
of Milestone AV Technologies
8805-000261
2008 Milestone AV Technologies, a
Duchossois Group Company
www.chiefmfg.com
12/08
Asia Pacific
A
P
F
A
P
F
A
8401 Eagle Creek Parkway, Savage, MN 55378
800.582.6480 / 952.894.6280
877.894.6918 / 952.894.6918
Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands
+31 (0)40 2668620
+31 (0)40 2668615
Room 24F, Block D, Lily YinDu International Building
LuoGang, BuJi Town, Shenzhen, CHINA.
P +86-755-8996 9226
F +86-755-8996 9217
Download PDF
Similar pages