ET-7750
Start Here
Read these instructions before using your product.
Note for Spanish speakers/Nota para hispanohablantes: Para
obtener instrucciones de configuración en español, consulte la Guía
de instalación en www.epson.com/support/et7750sp (requiere una
conexión a Internet).
2 Fill ink tanks
Note: This product requires careful handling of ink. If ink spills, wipe it
off immediately with a damp towel to avoid permanent stains. If ink gets
on your clothes or belongings, it may not come off.
Warning: Keep the ink bottles out of the reach of children and do not
drink the ink.
1
Open the ink tank cover, then open the cap for the ink tank
you are going to fill.
2
Unpack one of the ink bottles. Hold the ink bottle upright
and slowly turn the bottle cap to remove it.
1 Unpack
Note:
• Do not open the ink bottles until you are ready to fill the ink tanks.
The ink bottles are vacuum packed to maintain reliability.
Caution: Do not shake or squeeze the ink bottle. Do not touch
the top of the ink bottle after its cap is removed.
3
• The CD/DVD tray is taped to the bottom of cassette 2.
Position the top of the ink bottle along the slot in front of
the filling port, then slowly stand the bottle up to insert it.
• For instructions on how to replace the included replacement
maintenance box, see the online User’s Guide.
1
Remove all protective materials from the product.
Note: Refer to the color-coded sticker to identify the color of each
tank. Do not force the bottles into position; they are keyed for
each color.
4
2
Wait for the ink to fill the tank. Do not squeeze the bottle.
Ink flows into the tank and stops automatically when the
ink is filled to the upper line.
Lift up the scanner unit. Remove all protective materials
from inside the product.
Note: If ink does not flow from the bottle, lift and reinsert the
bottle.
Caution: Do not touch the flat white cable or the ink tubes and
their translucent cover.
5
When the ink tank is full, remove the ink bottle and securely
close the ink tank cap. Place the ink bottle aside; you will
need it later.
Note: Replace the bottle cap and tighten it.
6
Repeat the previous steps for the other colors.
13 Follow the on-screen instructions to adjust the print
7
Close the ink tank cover and then the scanner unit.
quality. Press the OK button to continue.
Note: You can change these settings later using the product’s
control panel. For more information, see the online User’s Guide.
14 To complete filling the ink tanks, repeat steps 1 through 6
using the remaining ink in the bottles.
Note: Replace the bottle cap before disposing of the bottles.
15 Press the OK button to proceed. Follow the on-screen
8
Connect the power cord to the back of the product and to
an electrical outlet.
instructions to reset the ink levels.
16 Close the ink tank cover and scanner unit.
3 Load paper
See the online User’s Guide for information about available
paper types and sizes, loading capacity, rear feed loading, and
loading CD/DVD/Blu-ray™ discs.
Caution: Do not connect to your computer yet.
9
Raise the control panel, then press the
turn on the product.
Output tray
power button to
Cassette 1
Cassette 2/front cover
You can load the following paper sizes:
Note: If an error message appears, turn off the product and
check that no protective material has been left inside the product.
10 Press
or to select your language on the LCD screen,
then press the OK button. Follow steps 11 and 12 to
continue ink charging.
• Cassette 1: 3.5 × 5-, 4 × 6-, or 5 × 7-inch photo paper
• Cassette 2: Letter-, A4-, legal-size, or 8 × 10-inch paper
See the instructions below for loading paper.
1
Raise the control panel and lower the front cover.
2
Pull out a paper cassette.
Note: You can change this setting later using the product’s
control panel. For more information, see the online User’s Guide.
11 When the message to see the Start Here sheet appears
on the LCD screen, press the OK button. On the next
screen, press and hold the OK button for 3 seconds.
12 When the message to start initialization appears on the
LCD screen, press the
start button to start charging
the ink. Ink charging takes approximately 7 minutes. A
message appears when ink charging is complete. Press
the OK button to continue.
Cassette 1
3
Cassette 2
Slide the side edge guides outward and set the front edge
guide to the paper size you are using.
Cassette 1
Cassette 2
Note: After some ink is used for charging, the rest is available for
printing.
Caution: Do not turn off the product, raise the scanner unit, or
load paper while the product is charging or you’ll waste ink.
4134833
1-F
Rev.0
C
4134833
1-F
Rev.0
M
4134833
1-F
Rev.0
Y
4134833
1-F
Rev.0
K
4 Insert paper with the glossy or printable side down.
2
Insert the product CD or download and run your product’s
software package:
www.epson.com/support/et7750 (U.S.) or
www.epson.ca/support/et7750 (Canada)
3 Follow the instructions on the screen to run the setup
Cassette 1
Cassette 2
Note: Make sure the paper is loaded against the front edge
guide and not sticking out from the end of the cassette.
5 Slide the side edge guides against the paper, but not too
tightly. Make sure the paper is under the tabs on the side
edge guides.
program.
4 When you see the Select Your Connection screen, select
one of the following:
• Wireless connection
In most cases, the software installer automatically
attempts to set up your wireless connection. If setup
is unsuccessful, you may need to enter your network
name (SSID) and password.
• Direct USB connection
Make sure you have a USB cable (not included).
Cassette 1
Cassette 2
6 Keep the cassette flat as you insert it all the way.
• Wired network connection
Make sure you have an Ethernet cable (not included).
Mobile printing
Connect wirelessly from your smartphone, tablet, or computer.
Print documents and photos from across the room or around
the world:
Cassette 1
Cassette 2
7 Pull out the output tray until it stops and lower the control
panel.
• Print
directly from your iOS device. Simply connect your
printer and device to the same network and tap the action
icon to select the print option.
• Use
Epson Print Enabler (free from Google Play™) with
Android™ devices (v4.4 or later). Then connect your printer
and device to the same network and tap the menu icon to
select the print option.
• Print remotely with Epson Connect™ and Google Cloud
Print™. See your online User’s Guide for instructions or
learn more at www.epson.com/connect (U.S.) or
www.epson.ca/connect (Canada).
8 Select the paper settings on the product’s control panel.
4 Install software
Note: If your computer does not have a CD/DVD drive or you are
using a Mac, an Internet connection is required to obtain the product
software.
To print from a Chromebook™, go to www.epson.com/support/gcp
(U.S.) or www.epson.ca/support/gcp (Canada) for instructions.
1 Make sure the product is NOT CONNECTED to your
computer.
Any problems?
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
• Restart your router (turn it off and then on), then try to
connect to it again.
• The printer can only connect to a network that supports
2.4 GHz connections. If your router offers both 2.4 GHz and
5 GHz connections, make sure 2.4 GHz is enabled.
• If you see a firewall alert message, click Unblock or Allow
to let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. Be sure to enter your password in the correct
case.
There are lines or incorrect colors in my printouts.
indows®: If you see a Found New Hardware screen, click
W
Cancel and disconnect the USB cable.
Run a nozzle check to see if any of the print head nozzles are
clogged. Then clean the print head, if necessary. See the online
User’s Guide for more information.
The product’s screen is dark.
Make sure your product is turned on, and press any button to
wake it from sleep mode.
Setup is unable to find my product after connecting it
with a USB cable.
Make sure your product is on and securely connected as
shown:
Need paper and ink?
nsure peak performance and brilliant results
E
with Genuine Epson® Ink and specialty papers,
engineered specifically for Epson printers. Find
Genuine Epson Ink and specialty papers at
www.epson.com (U.S. sales) or www.epson.ca
(Canadian sales) and at Epson authorized
resellers. Call 800-GO-EPSON (800-463-7766).
ET-7750 replacement inks
Color
Any questions?
Quick Guide
Basic information, troubleshooting, and limited warranty.
Part number
Black
512
Cyan
512
Magenta
512
Yellow
512
Photo Black
512
User’s Guide
Windows: Click the icon on your desktop or Apps screen to
access the online User’s Guide.
Mac: Click the icon in Applications/Epson Software/Guide to
access the online User’s Guide.
If you don’t have a User’s Guide icon, go to the Epson website,
as described below.
Technical support
Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product
to download drivers, view manuals, get FAQs, or contact Epson.
Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 am to
8 pm Pacific Time, Monday through Friday, and 7 am to 4 pm,
Pacific Time, Saturday. Days and hours of support are subject
to change without notice. Toll or long distance charges may
apply.
Recycling
Epson offers a recycling program for end of life hardware and
ink bottles. Please go to www.epson.com/recycle (U.S.) or
www.epson.ca/recycle (Canada) for information on how to
return your products for proper disposal.
EPSON is a registered trademark, Epson Connect is a trademark, and EPSON Exceed Your
Vision is a registered logomark of Seiko Epson Corporation.
Designed for Excellence is a trademark of Epson America, Inc.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
Android, Google Cloud Print, Chromebook, and Google Play are trademarks of Google Inc.
General Notice: Other product names used herein are for identification purposes only and may
be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2017 Epson America, Inc., 6/17
Printed in XXXXXX
CPD-53999
Download PDF
Similar pages