DVIGear: DVI-7312 DVI Fiber Optic Extender, 2x LC / Data Sheet

DVI-7312
DVI Fiber Optic Extender, 2x LC
FEATURES
•Supports HDTV resolutions up to 1080p,
PC resolutions up to 1920x1200
•Supports cable lengths up to 2,000 meters
(~ 1.2 miles)
•Supports multi-mode and single-mode fiber
optic cables.
•Optical fiber transmission is immune to
environmental signal noise
•Low RFI / EMI profile for sensitive applications
•User-programmable EDID memory, eliminates
the need for DDC connection
Superior Performance - The DVI-7312 is a low-cost, high performance
DVI Optical Extender capable of transporting high resolution DVI signals up
to 2.0 kilometers (~ 1.2 miles). The unit consists of an optical transmitter
module that converts the DVI input signals into light pulses for transmission
over two strands of multi-mode or single-mode fiber optic cable, and an
optical receiver module that converts the light pulses back to a DVI signal
for display on a monitor or projector. A programmable memory chip in
the transmitter module provides EDID support for any display, thereby
eliminating the need for copper cables. These features make the DVI‑7312
the perfect solution for any application that requires DVI signals to be
extended over very long cable distances with flawless image quality.
Source Device
(e.g. PC or Mac)
DVI-7312-TX*
Front View
Rear View
Display Device
(e.g. Projector)
AC Power Adapter
12
AC Power Adapter
(optional)
DVI-7312-TX / RX
12
DVI-7312-RX*
Two Multi-Mode or Single-Mode
LC optical cables
*HDCP communications
are not supported
DVIGear • 1059 Triad Court, Suite 8, Marietta, GA 30062 • Tel: 770.421.6699 • Toll Free: 888.463.9927 • Fax: 770.234.4207 • sales@dvigear.com • www.dvigear.com
DVI-7312
DVI Fiber Optic Extender, 2x LC
SPECIFICATIONS
Performance
Compliance
Maximum Pixel Clock Frequency
Maximum Video Bit Rate
Supported Color Depth
Supported HDTV Formats
Supported PC Resolutions
Digital Audio Support
Connections
DVI Input / DVI Output
Optical
Power Inputs
Optical
Optical Technology / Wavelengths
Optical Wavelength(s)
Optical Transmitter
Optical Receiver
Optical Transmitter Output Power
Optical Receiver Input Sensitivity
Optical Link Power Budget
Cable
Fiber Cable Type / Max. Length
DVIGear Fiber Cable
Cable Jacket
Cable Outside Diameter
DDC Support
EDID Support
HDCP Support
Mechanical
Construction
Dimensions (L x W x H)
Net Weight
Environmental
Temperature
Humidity
Power Requirements
Optical Transmitter
Optical Receiver
External AC Power Adapter
Power Consumption
Regulatory Approvals
Fiber Optic Extender Unit
AC Power Adapter
Warranty
Limited Warranty
Model Numbers
DVI-7312
DVI-7312-TX
DVI-7312-RX
DVI-CUST-OPT
Accessories Included
DVI v1.0
165 MHz
1.65 Gbps (single-link only)
8-bit
480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2048x1080
Up to 1600x1200 and 1920x1200
None
1x 18+1 DVI-D male connector
2x LC fiber optic connectors
1x 3.5mm jack
WDM (Wavelength-Division Multiplexing)
1310 nm, 1550 nm
Tx Module: 2x FP Laser Diodes, Class 1 laser product
Rx Module: 2x InGaAs PIN Photo Diodes
-9 dBm (minimum) / -3 dBm (maximum)
-24 dBm (minimum) / 0 dBm (maximum)
15.0 dB (minimum)
50/125μ LC Multi-Mode Fiber with 2x LC connectors / 500 meters
9/125μ LC Single-Mode Fiber with 2x LC connectors / 2,000 meters
OFNP, Plenum Rated - additional data and custom lengths available on request
OFNP, Plenum-rated, Black PVC Jacket
5.0 mm
An EDID memory built into the Tx module can learn and store the display’s EDID info.
HDCP communications are NOT supported!
High-impact plastic enclosure with black satin finish
2.8” x 1.6” x 0.6” (70.1 mm x 41.0 mm x 15.4 mm)
DVI-7312-TX: 1.1 oz. (32 g)
DVI-7312-RX: 1.1 oz. (32 g)
Operating: 32° to +158° F
(0° to +70°C)
Operating: 5% to 80% (non-condensing)
Storage: -40° to +185° F (-40° to +85°C)
Storage: 5% to 95% (non-condensing)
Tx module requires at least 360 ma of DC current from pin 14 of DVI (source) connector.
Optional external power supply may be used if needed.
Must be powered using the supplied external power supply
Input: 100-240VAC / 50-60Hz 0.2A
Output: 5VDC, 3.0A
DVI-7312-TX: 1.8 watts
DVI-7312-RX: 1.4 watts
FCC, CE, RoHS
FCC, CE, UL, C-UL, CEC, GS, PSE, RoHS
3 Years Parts and Labor
DVI Single-Link Fiber Optic Extender, 2x LC
DVI Single-Link Fiber Optic Transmitter, 2x LC
DVI Single-Link Fiber Optic Receiver, 2x LC
2x LC, Plenum-rated, Single-Link DVI Fiber Optic Cable (length must be specified)
1x External AC Power Adapter with USA plug, 1x User Guide
Optional Accessories
External AC Power Adapter (with USA, Euro, UK, or Australia plugs) for DVI-7312-TX Transmitter unit
2
DVIGear • 1059 Triad Court, Suite 8, Marietta, GA 30062 • Tel: 770.421.6699 • Toll Free: 888.463.9927 • Fax: 770.234.4207 • sales@dvigear.com • www.dvigear.com
Download PDF
Similar pages