Products Catalogue - Leading Antenna Manufacturer &

Ver. 2.4
REVISED MARCH 2014
Ver. 2.4
All Max Electronics Ltd.
Product Catalogue
WLAN & WiFi Antennas
Revision: 2.4
This document is the exclusive property of All Max Electronics Ltd. and should not be distributed, reproduced, into any other format without prior
permission of All Max Electronics Ltd. Specifications subject to change without prior notice.
Copyright © 2014 All Max Electronics Ltd. All Rights Reserved.
No.18, Shenning Road, Chancheng Dist., Foshan, Guangdong Pro., China.
All MaxTel:
Electronics
Limited. CopyrightFax:
@ 2014,
All Rights Reserved
www.allmaxelectronics.com
+86-757-83874839
+86-757-83874846
0
Email: sales@allmaxelectronics.com Website: www.allmaxelectronics.com
REVISED MARCH 2014
Ver. 2.4
All Max Electronics Ltd.
Product Catalogue
WLAN & WiFi Antennas
Revision: 2.4
This document is the exclusive property of All Max Electronics Ltd. and should not be distributed, reproduced, into any other format without
prior permission of All Max Electronics Ltd. Specifications subject to change without prior notice.
Copyright © 2014 All Max Electronics Ltd. All Rights Reserved.
No.18, Shenning Road, Chancheng Dist., Foshan, Guangdong Pro., China.
Tel: +86-757-83874839 Fax: +86-757-83874846
Email: sales@allmaxelectronics.com Website: www.allmaxelectronics.com
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
1
www.allmaxelectronics.com
REVISED MARCH 2014
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
2
www.allmaxelectronics.com
REVISED MARCH 2014
Table of Contents
WLAN/WiFi Antennas ............................................................................................................. 1
2.4 GHz Omni Fiberglass Antennas ................................................................................... 1
2.4 GHz 6 dBi Omnidirectional Fiberglass Antenna ................................................... 1
2.4 GHz 8 dBi Omnidirectional Fiberglass Antenna ................................................... 2
2.4 GHz 10 dBi Omnidirectional Fiberglass Antenna ................................................. 4
2.4 GHz 12 dBi Omnidirectional Fiberglass Antenna ................................................. 5
2.4 GHz Omni Mobile Antennas ........................................................................................ 7
2.4 GHz 3 dBi Omnidirectional Mobile Antenna ........................................................ 7
2.4 GHz 5 dBi Omnidirectional Mobile Antenna ........................................................ 8
2.4 GHz 7 dBi Omnidirectional Mobile Antenna ........................................................ 9
2.4 GHz 9 dBi Omnidirectional Mobile Antenna ...................................................... 10
2.4 GHz Parabolic Grid Antennas ................................................................................... 12
2.4 GHz 16 dBi Die-Cast Parabolic Grid Antenna .................................................... 12
2.4 GHz 24 dBi Die-Cast Parabolic Grid Antenna .................................................... 13
2.4 GHz 27 dBi Steel Parabolic Grid Antenna .......................................................... 15
2.4 GHz 30 dBi Steel Parabolic Grid Antenna .......................................................... 16
2.4 GHz Yagi Antennas .................................................................................................... 18
2.4 GHz 11 dBi Yagi Antenna ................................................................................... 18
2.4 GHz 13 dBi Yagi Antenna ................................................................................... 19
2.4 GHz 15 dBi Radome Enclosed Yagi Antenna ...................................................... 21
2.4 GHz Directional Patch Antennas ............................................................................... 22
2.4 GHz 3 dBi Ceiling Mount Antenna ..................................................................... 22
2.4 GHz 10 dBi Patch Antenna ................................................................................. 24
2.4 GHz 18 dBi Panel Antenna ................................................................................. 25
2.4 GHz Omni Rubber Duck Antennas............................................................................ 26
2.4 GHz 2 dBi Rubber Duck Antenna ...................................................................... 26
2.4 GHz 2.15 dBi Rubber Duck Antenna-47mm Length ........................................... 27
2.4 GHz 2.15 dBi Rubber Duck Antenna-50mm Length ........................................... 28
2.4 GHz 3 dBi Flexible Rubber Duck Antenna-90mm Length .................................. 30
2.4 GHz 3 dBi Rubber Duck Antenna-95mm Length ............................................... 31
2.4 GHz 3.5 dBi Stick Rubber Duck Antenna ........................................................... 32
2.4 GHz 4 dBi Rubber Duck Antenna ...................................................................... 33
2.4 GHz 5 dBi Rubber Duck Antenna ...................................................................... 34
2.4 GHz 7 dBi Rubber Duck Antenna ...................................................................... 35
2.4 GHz 9 dBi Rubber Duck Antenna ...................................................................... 36
2.4 GHz 10 dBi Rubber Duck Antenna..................................................................... 38
2.4 GHz 12 dBi Rubber Duck Antenna..................................................................... 39
2.4 GHz 13 dBi Rubber Duck Antenna..................................................................... 40
2.4/4.9/5.2/5.8 GHz QUAD Multiband Rubber Antenna ........................................... 41
5.8 GHz Omni Fiberglass Antennas ................................................................................. 42
5.8 GHz 8 dBi Omnidirectional Fiberglass WiFi Antenna ........................................ 42
5.8 GHz 12 dBi Omnidirectional Fiberglass WiFi Antenna ...................................... 43
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
I
www.allmaxelectronics.com
REVISED MARCH 2014
5.8 GHz 15 dBi Omnidirectional Fiberglass WiFi Antenna ...................................... 44
5.1 GHz to 5.8 GHz 12 dBi Omnidirectional Fiberglass WiFi Antenna ..................... 46
5.8 GHz Directional Panel Antennas................................................................................ 47
5.1 GHz to 5.8 GHz 16 dBi Panel Antenna ............................................................... 47
5.1 GHz to 5.8 GHz 18 dBi Panel Antenna ............................................................... 49
5.1 GHz to 5.8 GHz 23 dBi Panel Antenna ............................................................... 50
5.8 GHz Dish Antennas ................................................................................................... 52
5.8 GHz 29 dBi Parabolic Dish Antenna ................................................................... 52
5.8 GHz 32 dBi Parabolic Dish Antenna ................................................................... 53
5.1 GHz to 5.8 GHz 29 dBi Parabolic Dish Antenna ................................................. 55
5.1 GHz to 5.8 GHz 32 dBi Parabolic Dish Antenna ................................................. 56
5.8 GHz Terminal Antennas ............................................................................................ 58
5.8 GHz 3 dBi Rubber Duck Terminal Antenna-85mm Length ................................ 58
5.8 GHz 3 dBi Rubber Duck Terminal Antenna-108mm Length............................... 59
5.8 GHz 3 dBi Rubber Duck Terminal Antenna-130mm Length............................... 60
5.8 GHz 3 dBi Rubber Duck Terminal Antenna-160mm Length............................... 62
5.8 GHz 3 dBi Rubber Duck Terminal Antenna-210mm Length............................... 63
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
II
www.allmaxelectronics.com
REVISED MARCH 2014
WLAN/WiFi Antennas
2.4 GHz Omni Fiberglass Antennas
2.4 GHz 6 dBi Omnidirectional Fiberglass Antenna
Descriptions
The AME-BLQ2400-6dBi is a very short and cute but high performance omnidirectional WiFi antenna, designed for
the 2.4GHz ISM band. It is ideally suited for multipoint and mobile applications where high gain and wide coverage
is desired. Additional applications include IEEE 802.11b, 802.11g and 802.11n wireless LANs, Bluetooth, public
wireless hotspot applications.
This antenna’s construction features a durable fiberglass radome for durability and aesthetics. Its mounting system
features a heavy-duty extruded aluminum bracket and stainless steel U-Bolt for superior strength.
Features
■ High gain, low VSWR
■ Compact appearance, light weight
■ Sealed with high strength fiberglass tube
■ All-weather operation
■ Includes steel mounting kits
Applications
■ 2.3-2.5 GHz ISM Band
■ Base station antenna for 2.4GHz WLAN system
■ Supports IEEE 802.11b/g/n applications
■ Point to multipoint
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
1
www.allmaxelectronics.com
REVISED MARCH 2014
Specifications
Model
AME-BLQ2400-6dBi
Frequency Range
2400-2483 MHz
Gain
6 dBi
Polarization
Vertical
VSWR
≤1.5
Beamwidth
H 360°, E 25°
Rate power
50 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
Ø20×450mm
Weight
0.4 kg
Mounting Mast Diameter
Ø30~ Ø50 mm
Rated Wind Velocity
60 m/s
Operating Temperature
-40℃ to +80℃
2.4 GHz 8 dBi Omnidirectional Fiberglass Antenna
Descriptions
The AME-BLQ2400-8dBi is a very short and cute but high performance omnidirectional WiFi antenna, designed for
the 2.4GHz ISM band. It is ideally suited for multipoint and mobile applications where high gain and wide coverage
is desired. Additional applications include IEEE 802.11b, 802.11g and 802.11n wireless LANs, Bluetooth, public
wireless hotspot applications.
This antenna’s construction features a durable fiberglass radome for durability and aesthetics. Its mounting system
features a heavy-duty extruded aluminum bracket and stainless steel U-Bolt for superior strength.
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
2
www.allmaxelectronics.com
REVISED MARCH 2014
Features
■ High gain, low VSWR
■ Compact appearance, light weight
■ Sealed with high strength fiberglass tube
■ All-weather operation
■ Includes steel mounting kits
Applications
■ 2.3-2.5 GHz ISM Band
■ Base station antenna for 2.4GHz WLAN system
■ Supports IEEE 802.11b/g/n applications
■ Point to multipoint
Specifications
Model
AME-BLQ2400-8dBi
Frequency Range
2400-2483 MHz
Gain
8 dBi
Polarization
Vertical
VSWR
≤1.5
Beamwidth
H 360°, E 18°
Rate power
50 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
Ø20×680mm
Weight
0.45 kg
Mounting Mast Diameter
Ø30~ Ø50 mm
Rated Wind Velocity
60 m/s
Operating Temperature
-40℃ to +80℃
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
3
www.allmaxelectronics.com
REVISED MARCH 2014
2.4 GHz 10 dBi Omnidirectional Fiberglass Antenna
Descriptions
The AME-BLQ2400-10dBi is a compact but high performance omnidirectional WiFi antenna, designed for the
2.4GHz ISM band. It is ideally suited for multipoint and mobile applications where high gain and wide coverage is
desired. Additional applications include IEEE 802.11b, 802.11g and 802.11n wireless LANs, Bluetooth, public
wireless hotspot applications.
This antenna’s construction features a durable fiberglass radome for durability and aesthetics. Its mounting system
features a heavy-duty extruded aluminum bracket and stainless steel U-Bolt for superior strength.
Features
■ High gain, low VSWR
■ Compact appearance, light weight
■ Sealed with high strength fiberglass tube
■ All-weather operation
■ Includes steel mounting kits
Applications
■ 2.3-2.5 GHz ISM Band
■ Base station antenna for 2.4GHz WLAN system
■ Supports IEEE 802.11b/g/n applications
■ Point to multipoint
Specifications
Model
AME-BLQ2400-10dBi
Frequency Range
2400-2483 MHz
Gain
10 dBi
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
4
www.allmaxelectronics.com
REVISED MARCH 2014
Polarization
Vertical
VSWR
≤1.5
Beamwidth
H 360°, E 10.5°
Rate power
50 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
Ø20×1000mm
Weight
0. 5 kg
Mounting Mast Diameter
Ø30~ Ø50 mm
Rated Wind Velocity
60 m/s
Operating Temperature
-40℃ to +80℃
2.4 GHz 12 dBi Omnidirectional Fiberglass Antenna
Descriptions
The AME-BLQ2400-12dBi is a compact but high performance omnidirectional WiFi antenna, designed for the
2.4GHz ISM band. It is ideally suited for multipoint and mobile applications where high gain and wide coverage is
desired. Additional applications include IEEE 802.11b, 802.11g and 802.11n wireless LANs, Bluetooth, public
wireless hotspot applications.
This antenna’s construction features a durable fiberglass radome for durability and aesthetics. Its mounting system
features a heavy-duty extruded aluminum bracket and stainless steel U-Bolt for superior strength.
Features
■ High gain, low VSWR
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
5
www.allmaxelectronics.com
REVISED MARCH 2014
■ Compact appearance, light weight
■ Sealed with high strength fiberglass tube
■ All-weather operation
■ Includes steel mounting kits
Applications
■ 2.3-2.5 GHz ISM Band
■ Base station antenna for 2.4GHz WLAN system
■ Supports IEEE 802.11b/g/n applications
■ Point to multipoint
Specifications
Model
AME-BLQ2400-12dBi
Frequency Range
2400-2483 MHz
Gain
12 dBi
Polarization
Vertical
VSWR
≤1.5
Beamwidth
H 360°, E 8°
Rate power
50 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
Ø20×1200mm
Weight
0. 65 kg
Mounting Mast Diameter
Ø30~ Ø50 mm
Rated Wind Velocity
60 m/s
Operating Temperature
-40℃ to +80℃
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
6
www.allmaxelectronics.com
REVISED MARCH 2014
2.4 GHz Omni Mobile Antennas
2.4 GHz 3 dBi Omnidirectional Mobile Antenna
Descriptions
This Mobile Antenna is very compact but high performance. It is 2.4GHz mobile omnidirectional WiFi antenna,
ideally suited for multipoint mobile applications including service vehicles, public transportation, law enforcement,
mining and construction vehicles, as well as numerous other commercial and industrial applications where mobility
and wide coverage is desired. It is compatible with IEEE 802.11b, 802.11g and 802.11n wireless LANs, Bluetooth
and other WLAN applications. This compact mobile antenna designed for the spread spectrum communication
system.
Features
■ For the spread spectrum communication system
■ Fixed and magnetic mounts available
■ Weather-Proof
■ Compact size
Applications
■ 2.4 GHz ISM Band
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Bluetooth & WiFi
■ Wireless Video Systems & Multipoint and Mobile Applications
Specifications
Model
AME-XPD2400-3dBi
Frequency Range
2400-2483 MHz
Gain
3 dBi
Rate power
50 W
Nominal Impedance
50 Ω
Dimension
85 mm
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
7
www.allmaxelectronics.com
REVISED MARCH 2014
Connector
SMA/FME or customize
Cable Length
2m/3m/5m etc.
Cable Type
RG174
Mounting
Magnetic
Housing
Black
2.4 GHz 5 dBi Omnidirectional Mobile Antenna
Descriptions
This Mobile Antenna is very compact but high performance. It is 2.4GHz mobile omnidirectional WiFi antenna,
ideally suited for multipoint mobile applications including service vehicles, public transportation, law enforcement,
mining and construction vehicles, as well as numerous other commercial and industrial applications where mobility
and wide coverage is desired. It is compatible with IEEE 802.11b, 802.11g and 802.11n wireless LANs, Bluetooth
and other WLAN applications. This compact mobile antenna designed for the spread spectrum communication
system.
Features
■ For the spread spectrum communication system
■ Fixed and magnetic mounts available
■ Weather-Proof
■ Compact size
Applications
■ 2.4 GHz ISM Band
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Bluetooth & WiFi
■ Wireless Video Systems & Multipoint and Mobile Applications
Specifications
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
8
www.allmaxelectronics.com
REVISED MARCH 2014
Model
AME-CTQ2400-5dBi
Frequency Range
2400-2483 MHz
Gain
5 dBi
Rate power
50 W
Nominal Impedance
50 Ω
Size
Φ60(Base) ×220(Height) mm
Antenna Length
220±2 mm
Connector
SMA/FME/SMB/BNC/TNC or customize
Cable Length
2m/3m/5m etc.
Cable Type
RG174
Mounting
Magnetic
Housing
Black
2.4 GHz 7 dBi Omnidirectional Mobile Antenna
Descriptions
This Mobile Antenna is very compact but high performance. It is 2.4GHz mobile omnidirectional WiFi antenna,
ideally suited for multipoint mobile applications including service vehicles, public transportation, law enforcement,
mining and construction vehicles, as well as numerous other commercial and industrial applications where mobility
and wide coverage is desired. It is compatible with IEEE 802.11b, 802.11g and 802.11n wireless LANs, Bluetooth
and other WLAN applications. This compact mobile antenna designed for the spread spectrum communication
system.
Features
■ For the spread spectrum communication system
■ Fixed and magnetic mounts available
■ Weather-Proof
■ Compact size
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
9
www.allmaxelectronics.com
REVISED MARCH 2014
Applications
■ 2.4 GHz ISM Band
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Bluetooth & WiFi
■ Wireless Video Systems & Multipoint and Mobile Applications
Specifications
Model
AME-CTQ2400-7
Frequency Range
2400-2483 MHz
Gain
7 dBi
Rate power
50 W
Nominal Impedance
50 Ω
Size
Φ70(Base) ×290(Height) mm
Antenna Length
290±2 mm
Connector
SMA/FME/SMB/BNC/TNC or customize
Cable Length
2m/3m/5m etc.
Cable Type
RG174
Mounting
Magnetic
Housing
Black
2.4 GHz 9 dBi Omnidirectional Mobile Antenna
Descriptions
This Mobile Antenna is very compact but high performance. It is 2.4GHz mobile omnidirectional WiFi antenna,
ideally suited for multipoint mobile applications including service vehicles, public transportation, law enforcement,
mining and construction vehicles, as well as numerous other commercial and industrial applications where mobility
and wide coverage is desired. It is compatible with IEEE 802.11b, 802.11g and 802.11n wireless LANs, Bluetooth
and other WLAN applications. This compact mobile antenna designed for the spread spectrum communication
system.
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
10
www.allmaxelectronics.com
REVISED MARCH 2014
Features
■ For the spread spectrum communication system
■ Fixed and magnetic mounts available
■ Weather-Proof
■ Compact size
Applications
■ 2.4 GHz ISM Band
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Bluetooth & WiFi
■ Wireless Video Systems & Multipoint and Mobile Applications
Specifications
Model
AME-CTQ2400-9dBi
Frequency Range
2400-2483 MHz
Gain
9 dBi
Rate power
50 W
Nominal Impedance
50 Ω
Size
Φ70(Base) ×350(Height) mm
Antenna Length
350±2 mm
Connector
SMA/FME/SMB/BNC/TNC or customize
Cable Length
2m/3m/5m etc.
Cable Type
RG174/RG58
Mounting
Magnetic
Housing
Black
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
11
www.allmaxelectronics.com
REVISED MARCH 2014
2.4 GHz Parabolic Grid Antennas
2.4 GHz 16 dBi Die-Cast Parabolic Grid Antenna
Descriptions
The AME-GPD2400-16dBi High-Performance Reflector Grid Wi-Fi Antenna provides 16 dBi gain for long-range
directional applications. Applications include point to point systems, point to multi-point and wireless bridges in the
2.4 GHz ISM band as well as IEEE 802.11b/g/n wireless LAN systems. It can be installed for either vertical or
horizontal polarization.
This 24dB grid antenna's construction features a die cast aluminum reflector grid for good strength and ease of
installation. This antenna's 2-piece reflector grid is simple to assemble and significantly reduces shipping costs. The
grid surface is UV powder coated for durability and aesthetics. The open-frame grid design minimizes wind loading.
The antenna is supplied with a 60 degree tilt and swivel mast mount kit. This allows installation at various degrees of
incline for easy alignment. It can be adjusted up or down from 0°to 60°.
Features
■ Superior performance
■ Aluminum die-cast grid construction
■ UV stable light gray powder coat finish
■ Easy to assemble
■ All-weather operation
Applications
■ 2.4 GHz wireless LAN systems
■ 2.4 GHz UNI/ISM applications
■ IEEE 802.11b/g/n Wireless LAN applications
■ WiFi systems and long-range directional applications
■ Point to Point systems and Point to Multi-point systems
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
12
www.allmaxelectronics.com
REVISED MARCH 2014
■ Wireless bridges, backhaul applications and wireless video systems
Specifications
Model
AME-GPD2400-16dBi
Frequency Range
2400-2483 MHz
Bandwidth
83 MHz
Gain
16 dBi
F/B Ratio
≥20 dB
VSWR
≤1.5
Polarization
Vertical
Max power
100 W
Nominal Impedance
50 Ω
Beamwidth
H 16°; V 21°
Radiation
Direction
Connector
N Female or customize
Dimension
0.3×0.4 m
Weight
1.5 kg
Cable
30cm LMR400
Material
Aluminum Alloy
Rated Wind Velocity
60 m/s
2.4 GHz 24 dBi Die-Cast Parabolic Grid Antenna
Descriptions
The AME-GPD2400-24dBi High-Performance Reflector Grid Wi-Fi Antenna provides 24 dBi gain for long-range
directional applications. Applications include point to point systems, point to multi-point and wireless bridges in the
2.4GHz ISM band as well as IEEE 802.11b/g/n wireless LAN systems. It can be installed for either vertical or
horizontal polarization.
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
13
www.allmaxelectronics.com
REVISED MARCH 2014
This 24dB grid antenna's construction features a die cast aluminum reflector grid for good strength and ease of
installation. This antenna's 2-piece reflector grid is simple to assemble and significantly reduces shipping costs. The
grid surface is UV powder coated for durability and aesthetics. The open-frame grid design minimizes wind loading.
The antenna is supplied with a 60 degree tilt and swivel mast mount kit. This allows installation at various degrees of
incline for easy alignment. It can be adjusted up or down from 0°to 60°.
Features
■ Superior performance
■ Aluminum die-cast grid construction
■ UV stable light gray powder coat finish
■ Easy to assemble
■ All-weather operation
Applications
■ 2.4 GHz wireless LAN systems
■ 2.4 GHz UNI/ISM applications
■ IEEE 802.11b/g/n Wireless LAN applications
■ WiFi systems and long-range directional applications
■ Point to Point systems and Point to Multi-point systems
■ Wireless bridges, backhaul applications and wireless video systems
Specifications
Model
AME-GPD2400-24dBi
Frequency Range
2400-2483 MHz
Bandwidth
83 MHz
Gain
24 dBi
F/B Ratio
≥30 dB
VSWR
≤1.5
Polarization
Vertical
Max power
100 W
Nominal Impedance
50 Ω
Beamwidth
H 10°; V 14°
Radiation
Direction
Connector
N Female or customize
Dimension
0.6×0.9 m
Weight
2.5 kg
Cable
30cm LMR400
Material
Aluminum Alloy
Rated Wind Velocity
60 m/s
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
14
www.allmaxelectronics.com
REVISED MARCH 2014
2.4 GHz 27 dBi Steel Parabolic Grid Antenna
Descriptions
The AME-GPD2400-27dBi High Performance Parabolic Grid WiFi Antenna provides 27 dBi gain with a 6.5°
beam-width for highly directional long range applications. Additional applications include point to point systems,
point to multi-point and wireless bridges in the 2.4GHz ISM band as well as IEEE 802.11b/g/n wireless LAN systems.
External interference of this antenna is minimized due to the excellent front to back ratio. This antenna comes with a
30cm cable with an N-Female connector.
This antenna's construction features a welded steel reflector grid for superior strength. The grid surface is UV powder
coated for durability and aesthetics, and the open-frame design minimizes wind loading. This antenna's 2-piece
reflector grid is simple to assemble. The 2-piece design significantly reduces shipping costs compared to similar
antennas with one piece reflector grids.
Features
■ Superior performance
■ Aluminum die-cast grid construction
■ UV stable light gray powder coat finish
■ Easy to assemble
■ All-weather operation
Applications
■ 2.4 GHz wireless LAN systems
■ 2.4 GHz UNI/ISM applications
■ IEEE 802.11b/g/n Wireless LAN applications
■ WiFi systems and long-range directional applications
■ Point to Point systems and Point to Multi-point systems
■ Wireless bridges, backhaul applications and wireless video systems
Specifications
Model
AME-GPD2400-27dBi
Frequency Range
2400-2483 MHz
Bandwidth
83 MHz
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
15
www.allmaxelectronics.com
REVISED MARCH 2014
Gain
27 dBi
F/B Ratio
≥30 dB
VSWR
≤1.5
Polarization
Vertical
Max power
200 W
Nominal Impedance
50 Ω
Beamwidth
H 6.5°; V 6.5°
Radiation
Direction
Connector
N Female
Dimension
1.2 m
Weight
6.8 kg
Material
Aluminum Alloy
Rated Wind Velocity
60 m/s
2.4 GHz 30 dBi Steel Parabolic Grid Antenna
Descriptions
The AME-GPD2400-30dBi High Performance Parabolic Grid WiFi Antenna provides 30 dBi gain with a 5.3°
beam-width for highly directional long range applications. Additional applications include point to point systems,
point to multi-point and wireless bridges in the 2.4GHz ISM band as well as IEEE 802.11b/g/n wireless LAN systems.
External interference of this antenna is minimized due to the excellent front to back ratio. This antenna comes with a
30cm cable with an N-Female connector.
This antenna's construction features a welded steel reflector grid for superior strength. The grid surface is UV powder
coated for durability and aesthetics, and the open-frame design minimizes wind loading. This antenna's 2-piece
reflector grid is simple to assemble. The 2-piece design significantly reduces shipping costs compared to similar
antennas with one piece reflector grids.
Features
■ Superior performance
■ Aluminum die-cast grid construction
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
16
www.allmaxelectronics.com
REVISED MARCH 2014
■ UV stable light gray powder coat finish
■ Easy to assemble
■ All-weather operation
Applications
■ 2.4 GHz wireless LAN systems
■ 2.4 GHz UNI/ISM applications
■ IEEE 802.11b/g/n Wireless LAN applications
■ WiFi systems and long-range directional applications
■ Point to Point systems and Point to Multi-point systems
■ Wireless bridges, backhaul applications and wireless video systems
Specifications
Model
AME-GPD2400-30dBi
Frequency Range
2400-2483 MHz
Bandwidth
83 MHz
Gain
30 dBi
F/B Ratio
≥30 dB
VSWR
≤1.5
Polarization
Vertical
Max power
200 W
Nominal Impedance
50 Ω
Beamwidth
H 5.3°; V 5.3°
Radiation
Direction
Connector
N Female
Dimension
1.5 m
Weight
12 kg
Material
Aluminum Alloy
Rated Wind Velocity
60 m/s
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
17
www.allmaxelectronics.com
REVISED MARCH 2014
2.4 GHz Yagi Antennas
2.4 GHz 11 dBi Yagi Antenna
Descriptions
The AME-BMD2400-11dBi WiFi Yagi Antenna features high gain with coax cable and N-Female connector. It is
ideally suited for directional and multipoint IEEE 802.11b, 802.11g and 802.11n wireless LANs, Bluetooth, public
wireless hotspot applications and other systems operating in the 2.4GHz ISM band. The antenna is supplied with a tilt
and swivel mast mount kit, easy to install.
Features
■ High gain, low VSWR
■ High quality aluminum alloy construction
■ DC Short lightning protection
■ Includes tilt and swivel mast mount
■ Low loss cable lead terminated with N-Female connector
Applications
■ 2.4 GHz ISM Band
■ 2.4GHz WLAN systems
■ IEEE 802.11b, 802.11g Wireless LAN
■ WiFi & Wireless Video Systems
■ Wireless Bridge
Specifications
Model
AME-BMD2400-11dBi
Frequency Range
2400-2483 MHz
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
18
www.allmaxelectronics.com
REVISED MARCH 2014
Gain
11 dBi
Beamwidth
H: 40°E: 36°
F/B ratio
>28 dB
VSWR
≤1.5
Polarization
Vertical
Max power
50 W
Nominal Impedance
50 Ω
Connector
N Female or customize
Dimension
400*75*45 mm
Elements
8
Weight
0.69 kg
Rated Wind Velocity
60 m/s
Mounting Kits
U bolts
Operating Temperature
-40℃ to +80℃
2.4 GHz 13 dBi Yagi Antenna
Descriptions
The AME-BMD2400-13dBi WiFi Yagi Antenna features high gain with coax cable and N-Female connector. It is
ideally suited for directional and multipoint IEEE 802.11b, 802.11g and 802.11n wireless LANs, Bluetooth, public
wireless hotspot applications and other systems operating in the 2.4GHz ISM band.
The antenna is supplied with a tilt and swivel mast mount kit, easy to install.
Features
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
19
www.allmaxelectronics.com
REVISED MARCH 2014
■ High gain, low VSWR
■ High quality aluminum alloy construction
■ DC Short lightning protection
■ Includes tilt and swivel mast mount
■ Low loss cable lead terminated with N-Female connector
Applications
■ 2.4 GHz ISM Band
■ 2.4GHz WLAN systems
■ IEEE 802.11b, 802.11g Wireless LAN
■ WiFi & Wireless Video Systems
■ Wireless Bridge
Specifications
Model
AME-BMD2400-13dBi
Frequency Range
2400-2483 MHz
Gain
13 dBi
Beamwidth
H: 36°E: 35°
F/B ratio
≥14 dB
VSWR
≤1.5
Polarization
Vertical
Max power
50 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
590*85*45 mm
Weight
0.32kg
Rated Wind Velocity
60 m/s
Mounting Kits
U bolts
Operating Temperature
-40℃ to +80℃
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
20
www.allmaxelectronics.com
REVISED MARCH 2014
2.4 GHz 15 dBi Radome Enclosed Yagi Antenna
Descriptions
The AME-BMD2400-15dBi Radome Enclosed Yagi WiFi Antenna features high gain and a 35°beam-width. It is
ideally suited for directional and multipoint IEEE 802.11b, 802.11g and 802.11n wireless LANs, Bluetooth, public
wireless hotspot applications and other systems operating in the 2.4GHz ISM band. The unique design of this antenna
allows it to be installed for either vertical or horizontal polarization.
This antenna is enclosed within a UV-stable, UL flame rated radome for all-weather operations and supplied with a
60 degree tilt and swivel mast mount kit.
Features
■ High gain, low VSWR
■ low-loss coax lead terminated with a N-Female connector
■ DC Short lightning protection
■ Light weight, UV-stable & UL flame rated radome
■ Includes tilt and swivel mast mount
■ Can be installed for either vertical or horizontal polarization
Applications
■ 2.4 GHz WLAN systems
■ 2.4 GHz ISM Band
■ IEEE 802.11b, 802.11g &IEEE 802.11n Wireless LAN
■ Directional and multipoint applications
■ WiFi & wireless video systems
Specifications
Model
AME-BMD2400-15dBi
Frequency Range
2400-2483 MHz
Gain
15 dBi
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
21
www.allmaxelectronics.com
REVISED MARCH 2014
Beamwidth
H: 35°E: 35°
F/B ratio
≥18 dB
VSWR
≤1.5
Polarization
Vertical
Max power
50 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
Φ80X450mm
Weight
1.3 kg
Rated Wind Velocity
60 m/s
Mounting Kits
L bracket & U bolt
Operating Temperature
-40℃ to +80℃
2.4 GHz Directional Patch Antennas
2.4 GHz 3 dBi Ceiling Mount Antenna
Descriptions
The AME-XDX2400-3dBi antennas feature is broad band, low VSWR, small size, in a single package. The antenna is
omnidirectional for improved coverage in large areas. The unit is designed for use with access points and routers with
up to six antenna ports for spatial diversity. The spatially diverse elements allow the radios to select the antennas with
the best signal quality.
Designed for indoor operations, this model features a compact radome permitting mounting in many areas where
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
22
www.allmaxelectronics.com
REVISED MARCH 2014
space is at a premium for the antenna. This allows the antenna to be positioned for optimal performance. The antenna
has great appeal for office, health facilities, educational settings, industrial sites, and retail complexes, all where
broad area coverage is demanded. In additional to being compatible with IEEE 802.11b applications and 2.4 GHz
Wireless LAN and WiFi Systems
Features
■ Broad Band, low VSWR Small size
■ Spatial Diversity for better wireless reception
■ Compact/Aesthetic ceiling mount design
■ 30cm cable length with N Female connector options
Applications
■ IEEE 802.11b and Bluetooth applications
■ 2.4 GHz Wireless LAN and WiFi Systems
■ Indoor Wireless Hotspot
■ Hotels, Schools, Business Offices, HealthCare Facilities, Shopping Mall
Specifications
Model
AME-XDX2400-3dBi
Frequency Range
2400-2483 MHz
Bandwidth
83 MHz
Gain
3 dBi
VSWR
≤1.5
Polarization
Vertical
Nominal Impedance
50 Ω
Input Power
50W
Connector
N Female
Dimension
Φ190*85mm
Weight
0.3 kg
Mount Way
Ceiling Mount
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
23
www.allmaxelectronics.com
REVISED MARCH 2014
2.4 GHz 10 dBi Patch Antenna
Descriptions
The AME-BMD2400-10dBi high performance directional flat patch antenna series are suitable for indoor and
outdoor applications in the 2.4 GHz ISM band. These flat patch antennas provide 8-10 dBi of gain and a durable
UV-stable, UL flame rated radome that can be painted. This flat patch antenna series includes many connector options
including N- Male, N-Female, SMA, TNC, and MC-Card. Additionally, these patch antennas can be installed for
either vertical or horizontal polarization.
Features
■ High gain, Low VSWR, good appearance
■ Compact size, with low-loss coax cable
■ Durable UV-stable, UL flame rated patch antenna radome
■ Strong adaptability of environment
■ Optional pigtails and mounting brackets available
■ Can be installed for either vertical or horizontal polarization
Applications
■ 2.4 GHz ISM Band
■ 2.4 GHz WLAN system
■ Bluetooth & Public Wireless Hotspot
■ WiFi & Wireless Video Systems
■ Point to point and point to multipoint
Specifications
Model
AME-BMD2400-10dBi
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
24
www.allmaxelectronics.com
REVISED MARCH 2014
Frequency Range
2400-2483 MHz
Gain
10 dBi
Beamwidth
H: 110°E: 30°
VSWR
≤1.5
Polarization
Vertical
Max power
100 W
Nominal Impedance
50 Ω
Connector
N Female or customize
Dimension
Φ207*180*45 mm
Weight
0.5 kg
Operating Temperature
-40℃ to +80℃
2.4 GHz 18 dBi Panel Antenna
Descriptions
The AME-BMD2400-18dBi is a high performance directional flat panel antenna suitable for indoor and outdoor
applications in the 2.4GHz ISM band, including IEEE 802.11b, 802.11g and 802.11n.
This flat panel antenna features a heavy-duty UV-stable grey thermoplastic radome for all-weather operation. The
HG2418P antenna is supplied with a tilt and swivel mast mount kit. This allows installation at various degrees of
incline for easy alignment. It can be installed for vertical or horizontal polarization.
Features
■ Heavy duty all-weather radome
■ DC ground lightning protection
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
25
www.allmaxelectronics.com
REVISED MARCH 2014
■ Can be mounted for horizontal or vertical polarization
■ Can put CPE in enclosure
■ Includes tilt and swivel mast mount
Applications
■ 2.4 GHz Indoor/Outdoor Wireless LAN systems
■ Supports IEEE 802.11b/g/n applications
■ WiFi and 2.4 GHz wireless systems
■ Subscriber sites and CPE applications
Specifications
Model
AME-BMD2400-18dBi
Frequency Range
2400-2483 MHz
Gain
18 dBi
Beamwidth
H: 20°E: 20°
F/B Ratio
>28 dB
VSWR
≤1.5
Polarization
Vertical
Max power
100 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
Φ305×305×20 mm
Weight
1.5 kg
2.4 GHz Omni Rubber Duck Antennas
2.4 GHz 2 dBi Rubber Duck Antenna
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
26
www.allmaxelectronics.com
REVISED MARCH 2014
Descriptions
The AME-XPQ2400-2 dBi-36mm Rubber antenna for Wireless LAN antenna, provide broad coverage with an
omni-directional pattern. This flexible antenna features a tilt-and-swivel Reverse Polarity SMA Male connector,
allowing them to be used vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF
antenna for 2.4 GHz spread spectrum communication system terminal design and more.
Features
■ For 2.4 GHz spread spectrum of communications
■ Flexible Rubber Duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 2.4 GHz Band System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPQ2400-2dBi
Frequency Range
2400-2483 MHz
Gain
2 dBi
Polarization
Vertical
VSWR
≤1.5
Rate power
50 W
Nominal Impedance
50 Ω
Connector
M3/lM4 Connector
Dimension
36mm
2.4 GHz 2.15 dBi Rubber Duck Antenna-47mm Length
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
27
www.allmaxelectronics.com
REVISED MARCH 2014
Descriptions
The AME-XPQ2400-2.15dBi-47mm Rubber antenna for Wireless LAN antenna, provide broad coverage with an
omni-directional pattern. This flexible antenna features a tilt-and-swivel Reverse Polarity SMA Male connector,
allowing them to be used vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF
antenna for 2.4 GHz spread spectrum communication system terminal design and more.
Features
■ For 2.4 GHz spread spectrum of communications
■ Flexible Rubber Duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 2.4 GHz Band System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPQ2400-2.15dBi-47mm
Frequency Range
2400-2483 MHz
Gain
2.15 dBi
Polarization
Vertical
VSWR
≤2.0
Rate power
50 W
Nominal Impedance
50 Ω
Connector
SMA Male right angle 90°/straight
Dimension
Φ8×47mm
Weight
10g
Operating Temperature
-40℃ to +80℃
2.4 GHz 2.15 dBi Rubber Duck Antenna-50mm Length
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
28
www.allmaxelectronics.com
REVISED MARCH 2014
Descriptions
The AME-XPQ2400-2.15dBi-50mm Rubber antenna for Wireless LAN antenna, provide broad coverage with an
omni-directional pattern. This flexible antenna features a tilt-and-swivel Reverse Polarity SMA Male connector,
allowing them to be used vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF
antenna for 2.4 GHz spread spectrum communication system terminal design and more.
Features
■ For 2.4 GHz spread spectrum of communications
■ Flexible Rubber Duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 2.4 GHz Band System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPQ2400-2.15dBi-50mm
Frequency Range
2400-2483 MHz
Gain
2.15 dBi
Polarization
Vertical
VSWR
≤2.0
Rate power
50 W
Nominal Impedance
50 Ω
Connector
SMA Male right angle 90°/straight
Dimension
Φ8×50mm
Weight
10g
Operating Temperature
-40℃ to +80℃
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
29
www.allmaxelectronics.com
REVISED MARCH 2014
2.4 GHz 3 dBi Flexible Rubber Duck Antenna-90mm Length
Descriptions
The AME-XPQ2400-3dBi-90mm Rubber antenna for Wireless LAN antenna, provide broad coverage with an
omni-directional pattern. This flexible antenna features a tilt-and-swivel Reverse Polarity SMA Male connector,
allowing them to be used vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF
antenna for 2.4 GHz spread spectrum communication system terminal design and more.
Features
■ For 2.4 GHz spread spectrum of communications
■ Flexible Rubber Duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 2.4 GHz Band System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPQF2400-3dBi-90mm
Frequency Range
2400-2483 MHz
Gain
3 dBi
Polarization
Vertical
Return Loss (dBi)
17
Rate power
50 W
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
30
www.allmaxelectronics.com
REVISED MARCH 2014
Nominal Impedance
50 Ω
Dimension
90 mm
Connector
TNC Male
2.4 GHz 3 dBi Rubber Duck Antenna-95mm Length
Descriptions
The AME-XPQ2400-3dBi-95mm Rubber antenna for Wireless LAN antenna, provide broad coverage with an
omni-directional pattern. This flexible antenna features a tilt-and-swivel Reverse Polarity SMA Male connector,
allowing them to be used vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF
antenna for 2.4 GHz spread spectrum communication system terminal design and more.
Features
■ For 2.4 GHz spread spectrum of communications
■ Flexible Rubber Duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 2.4 GHz Band System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPQ2400-3dBi-95mm
Frequency Range
2400-2483 MHz
Bandwidth
125 MHz
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
31
www.allmaxelectronics.com
REVISED MARCH 2014
Gain
3 dBi
Polarization
Vertical
VSWR
≤1.5
Rate power
50 W
Nominal Impedance
50 Ω
Connector
SMA Male right angle 90°/straight, RP-SMA
Dimension
95mm
2.4 GHz 3.5 dBi Stick Rubber Duck Antenna
Descriptions
The Stick Rubber antenna for Wireless LAN antenna, provide broad coverage with an omni-directional pattern. This
flexible antenna features a tilt-and-swivel Reverse Polarity SMA Male connector, allowing them to be used vertically,
at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for 2.4 GHz spread spectrum
communication system terminal design and more.
Features
■ For 2.4 GHz spread spectrum of communications
■ Flexible Rubber Duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 2.4 GHz Band System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
32
www.allmaxelectronics.com
REVISED MARCH 2014
Specifications
Model
AME-XPQ2400-3.5dBi-S
Frequency Range
2400-2483 MHz
Gain
3.5 dBi
Polarization
Vertical
Rate power
50 W
Nominal Impedance
50 Ω
Dimension
115*22*4 mm
Connector
SMA/FME or customize
Cable length
2m/3m/5m etc.
Mounting
Adhesive
2.4 GHz 4 dBi Rubber Duck Antenna
Descriptions
The AME-XPQ2400-4dBi-120mm Rubber antenna for Wireless LAN antenna, provide broad coverage with an
omni-directional pattern. This flexible antenna features a tilt-and-swivel Reverse Polarity SMA Male connector,
allowing them to be used vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF
antenna for 2.4 GHz spread spectrum communication system terminal design and more.
Features
■ For 2.4 GHz spread spectrum of communications
■ Flexible Rubber Duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
33
www.allmaxelectronics.com
REVISED MARCH 2014
■ 2.4 GHz Band System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPQ2400-4dBi
Frequency Range
2400-2483 MHz
Gain
4 dBi
Polarization
Vertical
Rate power
50 W
Nominal Impedance
50 Ω
Dimension
120 mm
Connector
SMA/FME or customize
Cable length
5-20cm
2.4 GHz 5 dBi Rubber Duck Antenna
Descriptions
This compact 2.4 GHz omnidirectional high gain Rubber WiFi antenna provides broad coverage and 5 dBi gain. It is
a coaxial sleeve design with an omni-directional pattern. It is ideally suited for IEEE 802.11b, 802.11g and 802.11n
wireless LANs, Bluetooth and other WLAN applications.
This flexible antenna features a tilt-and-swivel reverse-polarity RP-SMA connector, allowing them to be used
vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points
communications system.
Features
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
34
www.allmaxelectronics.com
REVISED MARCH 2014
■ For 2.4 GHz spread spectrum of communications
■ Flexible rubber duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 2.4 GHz Band System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPQ2400-5dBi
Frequency Range
2400-2483 MHz
Gain
5 dBi
VSWR
≤1.5
Rate power
50 W
Nominal Impedance
50 Ω
Dimension
195 mm
Connector
RP-SMA Male or customize
Dimension
Φ13×195mm
Weight
25g
Operating Temperature
-40℃ to +80℃
2.4 GHz 7 dBi Rubber Duck Antenna
Descriptions
This compact 2.4 GHz omnidirectional high gain Rubber WiFi antenna provides broad coverage and 7dBi gain. It is a
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
35
www.allmaxelectronics.com
REVISED MARCH 2014
coaxial sleeve design with an omni-directional pattern. It is ideally suited for IEEE 802.11b, 802.11g and 802.11n
wireless LANs, Bluetooth and other WLAN applications.
This flexible antenna features a tilt-and-swivel reverse-polarity RP-SMA connector, allowing them to be used
vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points
communications system.
Features
■ For 2.4 GHz spread spectrum of communications
■ Flexible rubber duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 2.4 GHz Band System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPQ2400-7dBi
Frequency Range
2400-2483 MHz
Gain
7 dBi
VSWR
≤1.8
Rate power
50 W
Nominal Impedance
50 Ω
Dimension
195 mm
Connector
RP-SMA Male or customize
Dimension
Φ13×265mm
Weight
25g
Operating Temperature
-40℃ to +80℃
2.4 GHz 9 dBi Rubber Duck Antenna
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
36
www.allmaxelectronics.com
REVISED MARCH 2014
Descriptions
This compact 2.4 GHz omnidirectional high gain Rubber WiFi antenna provides broad coverage and 9dBi gain. It is a
coaxial sleeve design with an omni-directional pattern. It is ideally suited for IEEE 802.11b, 802.11g and 802.11n
wireless LANs, Bluetooth and other WLAN applications.
This flexible antenna features a tilt-and-swivel reverse-polarity RP-SMA connector, allowing them to be used
vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points
communications system.
Features
■ For 2.4 GHz spread spectrum of communications
■ Flexible rubber duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 2.4 GHz Band System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPQ2400-9dBi
Frequency Range
2400-2483 MHz
Gain
9 dBi
VSWR
≤1.8
Rate power
50 W
Nominal Impedance
50 Ω
Dimension
195 mm
Connector
RP-SMA Male or customize
Dimension
Φ13×295mm
Weight
25g
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
37
www.allmaxelectronics.com
REVISED MARCH 2014
Operating Temperature
-40℃ to +80℃
2.4 GHz 10 dBi Rubber Duck Antenna
Descriptions
This compact 2.4 GHz omnidirectional high gain Rubber WiFi antenna provides broad coverage and 10dBi gain. It is
a coaxial sleeve design with an omni-directional pattern. It is ideally suited for IEEE 802.11b, 802.11g and 802.11n
wireless LANs, Bluetooth and other WLAN applications.
This flexible antenna features a tilt-and-swivel reverse-polarity RP-SMA connector, allowing them to be used
vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points
communications system.
Features
■ For 2.4 GHz spread spectrum of communications
■ Flexible rubber duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 2.4 GHz Band System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPD2400-10dBi
Frequency Range
2400-2500 MHz
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
38
www.allmaxelectronics.com
REVISED MARCH 2014
Gain
10 dBi
Return Loss
17
Rate power
50 W
Nominal Impedance
50 Ω
Dimension
395 mm
Connector
RP-SMA or customize
2.4 GHz 12 dBi Rubber Duck Antenna
Descriptions
This compact 2.4 GHz omnidirectional high gain Rubber WiFi antenna provides broad coverage and 12dBi gain. It is
a coaxial sleeve design with an omni-directional pattern. It is ideally suited for IEEE 802.11b, 802.11g and 802.11n
wireless LANs, Bluetooth and other WLAN applications.
This flexible antenna features a tilt-and-swivel reverse-polarity RP-SMA connector, allowing them to be used
vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points
communications system.
Features
■ For 2.4 GHz spread spectrum of communications
■ Flexible rubber duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 2.4 GHz Band System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
39
www.allmaxelectronics.com
REVISED MARCH 2014
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPD2400-12dBi
Frequency Range
2400-2500 MHz
Gain
12 dBi
Return Loss
12
Rate power
50 W
Nominal Impedance
50 Ω
Dimension
430 mm
Connector
SMA/FME or customize
2.4 GHz 13 dBi Rubber Duck Antenna
Descriptions
This compact 2.4 GHz omnidirectional high gain Rubber WiFi antenna provides broad coverage and 13dBi gain. It is
a coaxial sleeve design with an omni-directional pattern. It is ideally suited for IEEE 802.11b, 802.11g and 802.11n
wireless LANs, Bluetooth and other WLAN applications.
This flexible antenna features a tilt-and-swivel reverse-polarity RP-SMA connector, allowing them to be used
vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points
communications system.
Features
■ For 2.4 GHz spread spectrum of communications
■ Flexible rubber duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
40
www.allmaxelectronics.com
REVISED MARCH 2014
Applications
■ 2.4 GHz Band System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPD2400-13dBi
Frequency Range
2400-2500 MHz
Gain
13 dBi
Return Loss
12
Rate power
50 W
Nominal Impedance
50 Ω
Dimension
703 mm
Connector
RP-SMA or customize
2.4/4.9/5.2/5.8 GHz QUAD Multiband Rubber Antenna
Specifications
Model
AME-QUAD2.4/5.8-5dBi
Frequency Range
2400-2483/4850-4950/5200-5300/5725-5850
Bandwidth
83/100/100/125
Gain
4dBi@2.45GHz;5dBi@4.9GHz;5dBi@5.25GHz;4.5dBi@5.75GHz
Polarization
Vertical
VSWR
≤1.5
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
41
www.allmaxelectronics.com
REVISED MARCH 2014
Rate power
50 W
Nominal Impedance
50 Ω
Connector
SMA/FME or customize
Dimension
160 mm
5.8 GHz Omni Fiberglass Antennas
5.8 GHz 8 dBi Omnidirectional Fiberglass WiFi Antenna
Descriptions
The AME-BLQ5800-8dBi is high performance omnidirectional WiFi antenna designed for the 5.8GHz ISM and UNII
band. It is ideally suited for multipoint and mobile applications where high gain and wide coverage is desired. Its
construction features is a fiberglass radome for durability and aesthetics. Included with the antenna, the mounting
system features a heavy-duty steel bracket and U-Bolt for superior strength.
Features
■ High gain, Low VSWR, Well performance
■ Durable UV-stable fiberglass radome for all-weather operation
■ DC Grounded
■ Supplied with mast mounting kits
■ Can be installed indoors or outdoors, optional gain
Applications
■ 5.1/5.5/5.8GHz UNII application
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
42
www.allmaxelectronics.com
REVISED MARCH 2014
■ 5.1/5.5/5.8GHz ISM applications
■ 5.1/5.5/5.8GHz Wireless LAN systems
■ Wireless Video Systems
■ Point to multipoint application
Specifications
Model
AME-BLQ5800-8dBi
Frequency Range
5720-5850 MHz
Gain
8 dBi
Polarization
Vertical or Horizontal
VSWR
≤1.5
Beamwidth
H 360°, E 16°
Rate power
100 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
Ø20×500mm
Weight
0.6 kg
Mounting Mast Diameter
Ø30~ Ø50 mm
Rated Wind Velocity
241 km/h
Operating Temperature
-40℃ to +80℃
5.8 GHz 12 dBi Omnidirectional Fiberglass WiFi Antenna
Descriptions
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
43
www.allmaxelectronics.com
REVISED MARCH 2014
The AME-BLQ5800-12dBi is high performance omnidirectional WiFi antenna designed for the 5.8GHz ISM and
UNII band. It is ideally suited for multipoint and mobile applications where high gain and wide coverage is desired.
Its construction features is a fiberglass radome for durability and aesthetics. Included with the antenna, the mounting
system features a heavy-duty steel bracket and U-Bolt for superior strength.
Features
■ High gain, Low VSWR, Well performance
■ Durable UV-stable fiberglass radome for all-weather operation
■ DC Grounded
■ Supplied with mast mounting kits
■ Can be installed indoors or outdoors, optional gain
Applications
■ 5.8GHz UNII application
■ 5.8GHz ISM applications
■ 5.8GHz Wireless LAN systems
■ Wireless Video Systems
■ Point to multipoint application
Specifications
Model
AME-BLQ5800-12dBi
Frequency Range
5725-5850 MHz
Gain
12 dBi
Polarization
Vertical or Horizontal
VSWR
≤1.5
Beamwidth
H 360°, E 7°
Rate power
100 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
Ø20×650mm
Weight
0.6 kg
Mounting Mast Diameter
Ø30~ Ø50 mm
Rated Wind Velocity
241 km/h
Operating Temperature
-40℃ to +80℃
5.8 GHz 15 dBi Omnidirectional Fiberglass WiFi Antenna
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
44
www.allmaxelectronics.com
REVISED MARCH 2014
Descriptions
The AME-BLQ5800-15dBi is high performance omnidirectional WiFi antenna designed for the 5.8GHz ISM and
UNII band. It is ideally suited for multipoint and mobile applications where high gain and wide coverage is desired.
Its construction features is a fiberglass radome for durability and aesthetics. Included with the antenna, the mounting
system features a heavy-duty steel bracket and U-Bolt for superior strength.
Features
■ High gain, Low VSWR, Well performance
■ Durable UV-stable fiberglass radome for all-weather operation
■ DC Grounded
■ Supplied with mast mounting kits
■ Can be installed indoors or outdoors, optional gain
Applications
■ 5.8GHz UNII application
■ 5.8GHz ISM applications
■ 5.8GHz Wireless LAN systems
■ Wireless Video Systems
■ Point to multipoint application
Specifications
Model
AME-BLQ5800-15dBi
Frequency Range
5725-5850 MHz
Gain
15 dBi
Polarization
Vertical or Horizontal
VSWR
≤1.5
Beamwidth
H 360°, E 3.5°
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
45
www.allmaxelectronics.com
REVISED MARCH 2014
Rate power
100 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
Ø38×950mm
Weight
1.2 kg
Mounting Mast Diameter
Ø40~ Ø50 mm
Rated Wind Velocity
241 km/h
Operating Temperature
-40℃ to +80℃
5.1 GHz to 5.8 GHz 12 dBi Omnidirectional Fiberglass WiFi Antenna
Descriptions
The AME-BLQ5158-12dBi is high performance omnidirectional WiFi antenna designed for the 5.8GHz ISM and
UNII band. It is ideally suited for multipoint and mobile applications where high gain and wide coverage is desired.
Its construction features is a fiberglass radome for durability and aesthetics. Included with the antenna, the mounting
system features a heavy-duty steel bracket and U-Bolt for superior strength.
Features
■ High gain, Low VSWR, Well performance
■ Durable UV-stable fiberglass radome for all-weather operation
■ DC Grounded
■ Supplied with mast mounting kits
■ Can be installed indoors or outdoors, optional gain
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
46
www.allmaxelectronics.com
REVISED MARCH 2014
Applications
■ 5.1/5.5/5.8GHz UNII application
■ 5.1/5.5/5.8GHz ISM applications
■ 5.1/5.5/5.8GHz Wireless LAN systems
■ Wireless Video Systems
■ Point to multipoint application
Specifications
Model
AME-BLQ5158-12dBi
Frequency Range
5150-5850 MHz
Gain
12 dBi
Polarization
Vertical or Horizontal
VSWR
≤1.5
Beamwidth
H 360°, E 7°
Rate power
100 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
Ø20×650mm
Weight
1.2 kg
Mounting Mast Diameter
Ø30~ Ø50 mm
Rated Wind Velocity
241 km/h
Operating Temperature
-40℃ to +80℃
5.8 GHz Directional Panel Antennas
5.1 GHz to 5.8 GHz 16 dBi Panel Antenna
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
47
www.allmaxelectronics.com
REVISED MARCH 2014
Descriptions
This heavy duty compact flat panel WiFi antenna is ideal for 5.8GHz UNII & ISM Band applications. The antenna
measures 12.40" (315mm) square and combines 19 dBi gain with broad coverage. It is suitable for both indoor and
outdoor applications. This WiFi antenna features a heavy-duty UV-stable white fiberglass radome for all-weather
operation. The HG5819P antenna is supplied with a tilt and swivel mast mount kit. This allows installation at various
degrees of incline for easy alignment. It can be installed for vertical or horizontal polarization.
Features
■ Light weight, compact size
■ Heavy-duty radome, all-weather operation
■ DC Short lightning protection
■ Integral N-Female connector
■ Includes tilt and swivel mast mount
■ Rugged and Weatherproof
Applications
■ 5.8GHz UNII applications
■ 5.8GHz ISM applications
■ 5.8GHz Wireless LAN systems
■ WiFi systems
■ Wireless Video System
Specifications
Model
AME-BMD5158-16dBi
Frequency Range
5150-5850 MHz
Gain
16 dBi
VSWR
≤1.5
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
48
www.allmaxelectronics.com
REVISED MARCH 2014
Polarization
Vertical or Horizontal
Beamwidth
H 17°, V 17°
F/B Ratio
>28dBi
Max power
100 W
Nominal Impedance
50 Ω
Connector
N Female or customize
Dimension
Φ250*220*55 mm
Weight
0.5 kg
Mounting Mast Diameter
Ø30~ Ø50 mm
Rated Wind Velocity
241 km/h
Operating Temperature
-40℃ to +80℃
5.1 GHz to 5.8 GHz 18 dBi Panel Antenna
Descriptions
AME-BMD5800-18dBi Panel Enclosure Antennas are high performance directional panel antennas suitable for
indoor and outdoor applications in the 5.1 to 5.8GHz band allowing the integration of the customer's electronic
equipment inside. The internal weatherproof equipment bay provides an enclosed space to mount radios, amplifiers,
and other electronic equipment directly behind the panel antenna. Standoffs are provided to help mount equipment
securely into the equipment bay.
Features
■ Internal Equipment Bay
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
49
www.allmaxelectronics.com
REVISED MARCH 2014
■ Easy to install, Durable UV-stable, UL flame rated radome
■ Integral Connector, optional antenna cables
■ Can be installed for either vertical or horizontal polarization
■ Includes tilt and swivel mast mount hardware
Applications
■ 5.1/5.5 /5.8 GHz communication Applications, UNII,ISM, 802.11a, WiMAX, WLAN, RLAN
■ WiFi Systems and Wireless Video Systems
■ WiMAX Mobile applications
■ Point to point, point to multipoint Applications
Specifications
Model
AME-BMD5800-18dBi
Frequency Range
5150-5850 MHz
Gain
18 dBi
Beamwidth
H: 60°E: 8°
Polarization
Vertical
VSWR
≤1.5
Max power
100 W
Nominal Impedance
50 Ω
Connector
N Female or customize
Dimension
320*200*98 mm
Inner Space of Enclosure
272*153*48 mm
Weight
2.0 kg
Enclosure
Material Aluminium Die Cast
Radome Materia
ABS
Mounting Mast Diameter
Ø30~Ø50mm
Rated Wind Velocity
241Km/h
5.1 GHz to 5.8 GHz 23 dBi Panel Antenna
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
50
www.allmaxelectronics.com
REVISED MARCH 2014
Descriptions
AME-BMD5800-23dBi Panel Enclosure Antennas are high performance directional panel antennas suitable for
indoor and outdoor applications in the 5.1 to 5.8GHz band allowing the integration of the customer's electronic
equipment inside. The internal weatherproof equipment bay provides an enclosed space to mount radios, amplifiers,
and other electronic equipment directly behind the panel antenna. Standoffs are provided to help mount equipment
securely into the equipment bay.
Features
■ High gain, High F/B ratio
■ Easy to install, Durable UV-stable, UL flame rated radome
■ Low profile, small size, light weight
■ Can be installed for either vertical or horizontal polarization
■ Includes tilt and swivel mast mount hardware
Applications
■ 5.1/5.5 /5.8 GHz communication Applications,
■ UNII,ISM, 802.11a, WiMAX, WLAN, RLAN
■ WiFi Systems and Wireless Video Systems
■ WiMAX Mobile applications
■ Point to point, point to multipoint Applications
Specifications
Model
AME-BMD5800-23dBi
Frequency Range
5150-5850 MHz
Gain
23 dBi
Beamwidth
H: 12°E: 12°
F/B Ratio
>28dB
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
51
www.allmaxelectronics.com
REVISED MARCH 2014
VSWR
≤1.5
Max power
100 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
Φ305*305*20 mm
Weight
0.65kg
Mounting Mast Diameter
Ø30~Ø50mm
Rated Wind Velocity
241Km/h
5.8 GHz Dish Antennas
5.8 GHz 29 dBi Parabolic Dish Antenna
Descriptions
The AME-PWG5800-29dBi is a high performance broadband dual polarized solid dish antenna. Because of its'
superb electrical performance and mechanical stability, the parabolic dish antenna can be used in a wide variety of
high performance 5.8 GHz range wireless applications. This simplifies installations since the same antenna can be
used for a wide array of wireless applications. This antenna features 29 dBi of gain with a 6°horizontal beam-width
and vertical beam-width.
The features a dual polarity feed system. It is fed via two N-Female ports, one for vertically polarized and one for
horizontally polarized signals. This feature makes it ideal for MIMO/802.11n and polarization diversity systems.
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
52
www.allmaxelectronics.com
REVISED MARCH 2014
Features
■ Dual Polarity feed system
■ High Gain, Low VSWR Wide Bandwidth
■ Aluminum Die Cast Reflector
■ Compatible with vertical or horizontal polarization
■ Includes tilt and swivel mast mount kit, easy to install
Applications
■ 5.8 GHz WLAN System
■ Long-Range Directional Applications
■ Point to Point, Point to Multi-point System
■ Wireless Bridges
Specifications
Model
AME-PWG5800-29dBi
Frequency Range
5720-5850 MHz
Bandwidth
125 MHz
Gain
29 dBi
Polarization
Vertical or Horizontal
VSWR
≤1.5
Beamwidth
H 8°, E 8°
Rate power
500 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
600 mm
Weight
4 kg
5.8 GHz 32 dBi Parabolic Dish Antenna
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
53
www.allmaxelectronics.com
REVISED MARCH 2014
Descriptions
The AME-PWG5800-32dBi is a high performance broadband dual polarized solid dish antenna. Because of its'
superb electrical performance and mechanical stability, the parabolic dish antenna can be used in a wide variety of
high performance 5.8 GHz range wireless applications. This simplifies installations since the same antenna can be
used for a wide array of wireless applications. This antenna features 29 dBi of gain with a 6°horizontal beam-width
and vertical beam-width.
The features a dual polarity feed system. It is fed via two N-Female ports, one for vertically polarized and one for
horizontally polarized signals. This feature makes it ideal for MIMO/802.11n and polarization diversity systems.
Features
■ Dual Polarity feed system
■ High Gain, Low VSWR Wide Bandwidth
■ Aluminum Die Cast Reflector
■ Compatible with vertical or horizontal polarization
■ Includes tilt and swivel mast mount kit, easy to install
Applications
■ 5.8 GHz WLAN System
■ Long-Range Directional Applications
■ Point to Point, Point to Multi-point System
■ Wireless Bridges
Specifications
Model
AME-PWG5800-32dBi
Frequency Range
5720-5850 MHz
Bandwidth
125 MHz
Gain
32 dBi
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
54
www.allmaxelectronics.com
REVISED MARCH 2014
Polarization
Vertical or Horizontal
VSWR
≤1.5
Beamwidth
H 6.5°, E 6.5°
Rate power
100 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
900 mm
Weight
7 kg
5.1 GHz to 5.8 GHz 29 dBi Parabolic Dish Antenna
Descriptions
The AME-PWD5800-29dBi is a high performance broadband dual polarized solid dish antenna. Because of its'
superb electrical performance and mechanical stability, the parabolic dish antenna can be used in a wide variety of
high performance 4.9 GHz and 5 GHz range (5.1/5.3/5.4/5.8 GHz) wireless applications.. This simplifies installations
since the same antenna can be used for a wide array of wireless applications. This antenna features 29 dBi of gain
with a 6°horizontal beam-width and vertical beam-width.
The features a dual polarity feed system. It is fed via two N-Female ports, one for vertically polarized and one for
horizontally polarized signals. This feature makes it ideal for MIMO/802.11n and polarization diversity systems.
Features
■ Dual Polarity feed system
■ High Gain, Low VSWR Wide Bandwidth
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
55
www.allmaxelectronics.com
REVISED MARCH 2014
■ Aluminum Die Cast Reflector
■ Compatible with vertical or horizontal polarization
■ Includes tilt and swivel mast mount kit, easy to install
Applications
■ 5.1/5.5/5.8 GHz WLAN System
■ Long-Range Directional Applications
■ Point to Point, Point to Multi-point System
■ Wireless Bridges
Specifications
Model
AME-PWD5800-29dBi
Frequency Range
5150-5850 MHz
Bandwidth
125 MHz
Gain
29 dBi
F/B Ratio
≥40 dB
Polarization
Vertical or Horizontal
VSWR
≤1.5
Beamwidth
H6°, E6°
Rate power
100 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
600 mm
Weight
5 kg
5.1 GHz to 5.8 GHz 32 dBi Parabolic Dish Antenna
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
56
www.allmaxelectronics.com
REVISED MARCH 2014
Descriptions
The AME-PWD5800-32dBi is a high performance broadband dual polarized solid dish antenna. Because of its'
superb electrical performance and mechanical stability, the parabolic dish antenna can be used in a wide variety of
high performance 4.9 GHz and 5 GHz range (5.1/5.3/5.4/5.8 GHz) wireless applications.. This simplifies installations
since the same antenna can be used for a wide array of wireless applications. This antenna features 29 dBi of gain
with a 6°horizontal beam-width and vertical beam-width.
The features a dual polarity feed system. It is fed via two N-Female ports, one for vertically polarized and one for
horizontally polarized signals. This feature makes it ideal for MIMO/802.11n and polarization diversity systems.
Features
■ Dual Polarity feed system
■ High Gain, Low VSWR Wide Bandwidth
■ Aluminum Die Cast Reflector
■ Compatible with vertical or horizontal polarization
■ Includes tilt and swivel mast mount kit, easy to install
Applications
■ 5.1/5.5/5.8 GHz WLAN System
■ Long-Range Directional Applications
■ Point to Point, Point to Multi-point System
■ Wireless Bridges
Specifications
Model
AME-PWD5800-32dBi
Frequency Range
5150-5850 MHz
Bandwidth
100 MHz
Gain
32 dBi
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
57
www.allmaxelectronics.com
REVISED MARCH 2014
Polarization
Vertical or Horizontal
VSWR
≤1.5
Beamwidth
H 6.5°, E 6.5°
Rate power
100 W
Nominal Impedance
50 Ω
Connector
N Female
Dimension
900 mm
Weight
7 kg
5.8 GHz Terminal Antennas
5.8 GHz 3 dBi Rubber Duck Terminal Antenna-85mm Length
Descriptions
This compact 5.8 GHz omnidirectional Rubber antenna provides broad coverage and 3dBi gain. It is a coaxial sleeve
design with an omni-directional pattern. It is ideally suited for IEEE 802.11b, 802.11g and 802.11n wireless LANs,
Bluetooth and other WLAN applications.
This flexible antenna features a tilt-and-swivel reverse-polarity RP-SMA connector, allowing them to be used
vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points
communications system.
Features
■ For 5.8 GHz spread spectrum of communications
■ Flexible rubber duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 5.8 GHz Wireless LAN System
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
58
www.allmaxelectronics.com
REVISED MARCH 2014
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPQ5800-3dBi-85mm
Frequency Range
57250-5850 MHz
Gain
3 dBi
Polarization
Vertical
VSWR
≤1.5
Rate power
50 W
Nominal Impedance
50 Ω
Connector
SMA/FME or customize
Dimension
Φ13×85 mm
Weight
10g
Operating Temperature
-40℃ to +80℃
5.8 GHz 3 dBi Rubber Duck Terminal Antenna-108mm Length
Descriptions
This compact 5.8 GHz omnidirectional Rubber antenna provides broad coverage and 3dBi gain. It is a coaxial sleeve
design with an omni-directional pattern. It is ideally suited for IEEE 802.11b, 802.11g and 802.11n wireless LANs,
Bluetooth and other WLAN applications.
This flexible antenna features a tilt-and-swivel reverse-polarity RP-SMA connector, allowing them to be used
vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points
communications system.
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
59
www.allmaxelectronics.com
REVISED MARCH 2014
Features
■ For 5.8 GHz spread spectrum of communications
■ Flexible rubber duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 5.8 GHz Wireless LAN System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPQ5800-3dBi-108mm
Frequency Range
2400-2483/5150-5250/ 5725-5850MHz
Gain
2.0/2.5/ 3dBi
Polarization
Vertical
VSWR
≤1.5
Rate power
50 W
Nominal Impedance
50 Ω
Connector
RP-SMA or customize
Dimension
Φ8×108 mm
Weight
12g
Operating Temperature
-40℃ to +80℃
5.8 GHz 3 dBi Rubber Duck Terminal Antenna-130mm Length
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
60
www.allmaxelectronics.com
REVISED MARCH 2014
Descriptions
This compact 5.8 GHz omnidirectional Rubber antenna provides broad coverage and 3dBi gain. It is a coaxial sleeve
design with an omni-directional pattern. It is ideally suited for IEEE 802.11b, 802.11g and 802.11n wireless LANs,
Bluetooth and other WLAN applications.
This flexible antenna features a tilt-and-swivel reverse-polarity RP-SMA connector, allowing them to be used
vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points
communications system.
Features
■ For 5.8 GHz spread spectrum of communications
■ Flexible rubber duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 5.8 GHz Wireless LAN System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPQ5800-3dBi-130mm
Frequency Range
2400-2483/5150-5250/ 5725-5850MHz
Gain
3 dBi
Polarization
Vertical
VSWR
≤1.5
Rate power
50 W
Nominal Impedance
50 Ω
Connector
RP-SMA or customize
Dimension
Φ16×130 mm
Weight
16g
Operating Temperature
-40℃ to +80℃
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
61
www.allmaxelectronics.com
REVISED MARCH 2014
5.8 GHz 3 dBi Rubber Duck Terminal Antenna-160mm Length
Descriptions
This compact 5.8 GHz omnidirectional Rubber antenna provides broad coverage and 3dBi gain. It is a coaxial sleeve
design with an omni-directional pattern. It is ideally suited for IEEE 802.11b, 802.11g and 802.11n wireless LANs,
Bluetooth and other WLAN applications.
This flexible antenna features a tilt-and-swivel reverse-polarity RP-SMA connector, allowing them to be used
vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points
communications system.
Features
■ For 5.8 GHz spread spectrum of communications
■ Flexible rubber duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 5.8 GHz Wireless LAN System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
Model
AME-XPQ5800-3dBi-160mm
Frequency Range
2400-2483/5150-5250/ 5725-5850MHz
Gain
3 dBi
Polarization
Vertical
VSWR
≤1.5
Rate power
50 W
Nominal Impedance
50 Ω
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
62
www.allmaxelectronics.com
REVISED MARCH 2014
Connector
RP-SMA or customize
Dimension
Φ21×160 mm
Weight
35g
Operating Temperature
-40℃ to +80℃
5.8 GHz 3 dBi Rubber Duck Terminal Antenna-210mm Length
Descriptions
This compact 5.8 GHz omnidirectional Rubber antenna provides broad coverage and 3dBi gain. It is a coaxial sleeve
design with an omni-directional pattern. It is ideally suited for IEEE 802.11b, 802.11g and 802.11n wireless LANs,
Bluetooth and other WLAN applications.
This flexible antenna features a tilt-and-swivel reverse-polarity RP-SMA connector, allowing them to be used
vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points
communications system.
Features
■ For 5.8 GHz spread spectrum of communications
■ Flexible rubber duck antenna
■ Small dimension and light structure, easy to install
■ Good shockproof and anti-aging performance
Applications
■ 5.8 GHz Wireless LAN System
■ IEEE 802.11b, 802.11g Wireless LAN & IEEE 802.11n Applications
■ Public Wireless Hotspot
■ Wireless Video Systems
■ Multipoint and Mobile Applications & Bluetooth
Specifications
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
63
www.allmaxelectronics.com
REVISED MARCH 2014
Model
AME-XPQ5800-3dBi-210mm
Frequency Range
5725-5850MHz
Gain
3 dBi
Polarization
Vertical
VSWR
≤1.5
Rate power
50 W
Nominal Impedance
50 Ω
Connector
RP-SMA or customize
Dimension
Φ13×210 mm
Weight
21g
Operating Temperature
-40℃ to +80℃
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
64
www.allmaxelectronics.com
REVISED MARCH 2014
TERMS OF USE: The antenna of All Max Electronics must be professionally installed. It is the
installers responsibility to folly local country regulations including operation within legal frequency
channels, output power, and Dynamic Frequency Selection (DFS) requirements.
For further information, please visit www.allmaxelectronics.com.
All Max Electronics Limited. Copyright @ 2014, All Rights Reserved
65
www.allmaxelectronics.com
Download PDF
Similar pages