HL730-7 / HL730TM-7 / HL730XTD-7

Bucket Selection Guide
Supplemental Specifications
Change in static
Change in operating
Change in static
weight
tipping load-straight tipping load-40ᴋturn
kg(lb)
kg(lb)
kg(lb)
Description
17.5-25 12PR L2
-60 (-132)
-43 (-95)
-38 (-84)
17.5 R25 XHA ᵂ
+80 (+176)
+57 (+126)
+50 (+110)
Standard Equipment
Electrical system
Alternator, 70A
Alarms, audible and visual
. air filter clogging
. transmission error
. alternator voltage
. brake oil pressure
. engine oil pressure
. parking brake
. fuel level
. hydraulic oil temperature
. coolant temperature
. service brake oil pressure
Batteries, maintenance-free 850 CCA,
12V, (2)
Horn, electric
Gauges
. engine coolant temperature
. fuel level
. hydraulic oil temperature
. speedometer
. transmission oil temperature
. voltmeter
Indicator lights
. clutch cut-off
. high beam
. turn signal
. work light
LCD Display
. clock and fault code
. operating hour counter
. engine rpm
. transmission gear range indicator
. job time and distance
. temperature(coolant, hydraulic
oil, t/m oil)
Lighting system
. 2 dome lights
. 2 stop and tail lights
. 4 turn signals
. brake lights(counter weight)
. license plate light
. head light
2 on front tower
. working lights
2 on front roof
2 on grill
Switches
. buzzer stop
. clutch cut-off
. hazard
. Ignition key, start/stop switch
. main light(illumination and
head light)
. parking
. rear wiper & washer
. work light
. full automatic transmission
Starter, electric
Starting and charging system(24-volt)
Cab
Cab, ROPS/FOPS
(sound suppressed and pressurized) with :
. cigar lighter & ashtray
. coat hook
. front/rear window defroster
. intermittent wiper and washer,
front and rear
. personal storage space:
holder, can and cup
. rear view mirrors (2 inside)
. rear view mirrors (2 outside)
. seat belt
. seat, adjustable suspension
with armrests
. steering column, tilt and telescopic
. steering wheel with knob
. sun visor(front window)
. tinted safety glass
Magazine box
Pedals
. one accelerator pedal
. one brake pedal
Rubber floor mat
Wrist rest
Engine
Antifreeze
Engine, Cummins B3.9-C
. Low Emission Diesel, Tier-ll
Engine enclosure, lockable
Engine fuel priming pump
Fan guard
Fuel/water separator
Fuel heater
Muffler, under hood with large
exhaust stack
Rain cap, engine air intake
Radiator
Starting aid (air intake heater)
Power Train
Brakes : Service, enclosed wet-disc
Differential,
Front : limited slip,
Rear : conventional
Parking brake
Torque converter
Transmission, computer-controlled,
electronic soft shift, auto-shift and
kick-shift features included
Transmission oil cooler
Hydraulics
Boom lock safety valve
Boom kickout, automatic
Bucket positioner, automatic
Diagnostic pressure taps
Hydraulic oil cooler
Hydraulic system,
. 2 spool, single lever, pilot control
for boom and bucket actuation
Steering, load-sensing
Remote cooling fan,
hydraulically-driven,
temperature sensing type
Others
Articulation locking bar
Coolant level sight gauge
Counterweight
Door and cab locks, one key
Doors, service access(locking)
Drawbar with pin
Engine oil level dipstick gauge
Ergonomically located and slip
resistant, left & right
- handrails
- ladders
- platforms
- steps
Fenders(front/rear)
Guard, bucket cylinder rod
Hydraulic oil level sight gauge
License plate bracket
Lift and tie-down hooks
Steering stops, cushioned
Tires(17.5-25, 12PR, L3)
Transmission oil level dipstick
gauge
Vandalism protection caplocks
␊ Some of the photos may include optional equipment.
Optional Equipment
24-volt to 12-volt DC converter
Air condition :
. air conditioner
. air conditioner with heater
. heater
Alarm, back-up
Beacon light, rotating
Cutting edge, bolt-on type
Differential,
Front : no spin, Rear : limited slip
Emergency steering system
Fire extinguisher
High lift arrangement with
optional counterweight,
410kg (904 lb)
Hourmeter
Hydraulic control, 2 lever
Hydraulic control, 3 lever
Hydraulic arrangement, 3-valve
Lighting, auxiliary, 4 on roof
Main disconnect switch
Mud guard
Operator suit
Radio MP3 player
Ride control system
Seat
. 2” static seat belt &
adjustable mechanical
suspension(vinyl)
. 3” static seat belt &
adjustable mechanical
suspension
. 3” retractable seat belt &
adjustable air suspension
Tires :
. 17.5 - 25, 12PR, L2
. 17.5 R25, XHAᵂ
Window, sliding
(left and right side)
Starting aid(ether)
HYUNDAI WHEEL LOADER Applied Tier 2 Engine
Tool kit
Tooth, 1 piece, bolt-on type
Guards
. crankcase
. transmission
Wheel chock
HL730-7 / HL730TM-7 / HL730XTD-7
Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine shown may vary according to International standards.
All US measurement rounded off to nearest pounds or inchs.
PLEASE CONTACT
www.hyundai-ce.com
2009. 11 Rev.10
Hardworking Hyundai Loaders
Meet the new generation wheel loader in Hyundai.
The HL730-7 will give you the satisfaction in higher power,
lower fuel consumption, more comfort and lower emission .
Come and experience what Hyundai has created
for you by bringing power and technology.
Wheel Loader
Engine
੒Gross Power 125 HP
੒Tier II Lower emission Engine
Transmission
␊ Some of the photos may include optional equipment.
੒2 Automatic Selection Mode
੒2 Kick Down Function Mode
੒AEB Function
Control
Center
The all-new, deluxe operating space was engineered with
3-D modeling to be your ultimate control center. The wide,
tinted and laminated front windshield has no framing
cutting through to ensure excellent visibility.
The Centralized Display &
Switch Panel
The centralized digital display shows the
status and conditions of your machine at a
glance.
Finger Control Lever (Option)
Joystick Control Lever
Two kickdown switches located on top of the
loader control lever and the gear shifting lever
allow the operator to change instantly to 1st
stage lower gear, in order to drive at full
power into the material.
Up-to-date-technology CAN system
The Air Conditioning and
Heating System
Transmission Control Unit(TCU) and Machine Control
Unit(MCU) realize the optimal performance through
the mutual CAN communications.
␊ Some of the photos may include optional equipment.
TCU
MCU
Full automatic shift lever
Adjustable steering column
40ᴮ
80 mm
Control Center 4
The operator can easily control the
temperature and air flow . The defroster
on the front windshield and rear window
makes it convenient for winter working
usage.
A single lever on the left side of the steering column
gives the operator fast, easy control of speed and
direction. Push the lever forward to go forward, pull it
back for reverse.
Travelling is automatically changed from 1st stage to
given stage according to travel speed and tractive
effort.
The operator can select two kinds of automatic
modes (1st ␡ 4th, 2nd ␡ 4th).
This exclusive feature contributes to a improvement
in productivity and reduction of operator fatigue.
Ride control system (optional)
The ride control system is available for smooth travelling as an option.
It significantly reduces machine bouncings and absorbs the shocks in the machine,
enhancing the productivity of the machine. This system reduces the fatigue of the
driver as well as the stress on the structures and components.
The system is consisted of accumulators in the hydraulic lift circuit, hydraulic
control valve and selection switch.
♮ Off position : Function is cancelled ♯ On position : Function is available
♰ Auto position : Function is available when the machine travels above
9.5km/hr(6.0mph). If the machine travels under 8 km/hr (5.0 mph), the function is
cancelled automatically.
Control Center 5
Powerful Cummins
Engine
A Well Rounded System
Up-to-date hydraulic remote
cooling fan
The CUMMINS B3.9-C
engine is world-renowned
for its power and reliability.
Its excellent combustion
efficiency provides
maximum power with low
fuel consumption, even in
cold weather.
The world-wide Cummins
dealer network assures
that parts and service
support is readily available.
(EPA TierII, EU StageII)
The minimum fuel consumption and low
noise is realized by applying hydraulic
cooling fan that senses coolant temperature,
intake air temperature, transmission oil
temperature and hydraulic oil temperature.
Multi Function
Transmission
The newly developed transmission
control represents the beating
heart of transmission. The
hydraulic system for gearshifts is
working with proportional valves,
which allow a very precise control
of the clutches. For each
gearchange, the control unit
performs a monitoring function to
ensure the specified shift curve is
adhered to, and readjusts the shift
pressure applied to the clutches
accordingly. This results in smooth
gearshifts-even under load-with no traction interrupt. This helps to
avoid standstill of the vehicle, sudden load changes and torque
peaks under all conditions, for example application on steep
terrain with full load. In addition, there is the option for the driver
to make gearshifts manually.
Axle
Inboard type brake
discs.
␊ Some of the photos may include optional equipment.
Bucket cylinder guard
High-rigidity frames
Battery master switch
This guard helps to prevent possible
damage from load material.
Front and rear frames are designed for work in the
toughest applications to provide high rigidity for
the power train and loader equipment. The highrigidity frames, together with the reinforced loader
linkage, resist loading stress and shock.
A master switch disconnects the
battery power to protect the
electrical system from excess
electrical drainage.
A Well Rounded System 6
Chromium - Plated PIN is
applied
With the application of Chromium
Plated PIN, durability and
precision are improved and the life
cycle became longer.
Sealed loader linkage
Frame lock
Fully protected fitting and the sealed
loader linkage with dust seals and o-ring
will extend lubrication intervals
remarkably.
Machine can be locked by this locking bar to
prevent movement during transportation.
A Well Rounded System 7
Accessible and Serviceable
Easy Access to All Engine Accessary
Here you find the engine oil check, and the main and
pre-filters. The large access engine-side-panels
permit easy and safe inspection.
The fuel filter can be spun on and off for quick
replacements.
Cabin Air Fresh Filter
The internal pressure is maintained
to be slightly higher than that of
outside to exclude dust and to
reduce noise levels.
Remote type drain port
It is now easier to change your
engine oil, coolant and hydraulic
oil with the remote drain port.
Coolant Sight Gauge
The coolant sight gauge is
installed on the top of radiator
for convenient checks of coolant
level.
␊ Some of the photos may include optional equipment.
Accessible grease
fittings
Simple air filter
replacements
Grease fittings are highlighted
and available around the
machine for fast access when
doing your service checks.
The air cleaner is easily
replaceable by turning the wing
nut on the outer shell
counterclockwise.
Accessible and Serviceable 8
Central electric controllers & Fuse box
Hydraulic tank
Oil sight gauge
Transmission oil port
Electric controllers for Hyundai loader are
centralized to improve serviceability.
A concentrated fuse box for easy inspection.
The hydraulic tank is located behind the cab to
increase the accessibility of hydraulic hoses and
pipes.
The hydraulic oil check sight
gauge is installed on the side of
the hydraulic tank for convenient
checks from ground level.
The transmission oil change port is
also located for open accessibility
and comes with an anti-vandalism
lock for your machine protection.
Accessible and Serviceable 9
Specifications & Dimensions
Engine
Maker/Model
Axles
CUMMINS B3.9-C
Type
4-cycle, turbocharged, charge
aircooled direct injection,
Gross power
125HP(93 kW) / 2,200rpm
Net power
Maximum torque
No. of cylinders
119HP(89 kW) / 2,200rpm
52kg.m(373 lb.ft) / 1,300rpm
4
Bore x Stroke
102 mm (4.02”) x 120 mm (4.72”)
Displacement
3.9ὀ(239 cu in)
Compression ratio
Air cleaner
Drive system
Four-wheel drive system
Mount
Rigid front axle and
oscillating rear axle
ᴦ12o (total 24o)
Rear axle oscillation
Hub reduction
Planetary reduction at wheel end
Differential
Limited slip front & conventional rear
Reduction ratio
22.846
Emergency brake
Description
UNIT
Hydraulic system
2 x 12V, 80 AH.
Cooling
24V, 3.7 kW
Hydraulic remote cooling system
Net power output of standard engine as installed in this
vehicle(per SAE J1349) complete with fan, air cleaner,
alternator, water pump, lubricating oil pump and fuel
pump. No derating for continuous operating required up
to 3048m (10000ft). This engine meets the EPA(Tierௗ) /
EU(Stageௗ) Emission regulation.
Pump
Control valve
Relief valve setting
Pilot system
Type
Relief valve setting
Open-centered, tandem circuit system.
Pilot-operated controls.
Closed with pressure and vacuum relief.
Full automatic power shift, countershaft type with softshift in range and direction. Properly matched torque
converter to engine and transmission for excellent
working ability
Two mode automatic shifting and kick down system.
Torque converter type
Stall torque ratio
Tire
Travel speed
3-elements, single-stage
single-phase
2.382 : 1
17.5-25, L3
km/h (mph)
1st
6.9(4.3)
2nd
12.1(7.5)
3rd
22.1(13.7)
4th
37.0(23.0)
1st
7.3(4.5)
2nd
12.8(8.0)
3rd
23.3(14.5)
Type
mm (ft-in)
1,005 (3’ 4”) 1,140 (3’ 9” ) 1,010 (3’ 4”)
7ft height
mm (ft-in)
1,440 (4’ 9”) 1,580 (5’ 2”) 1,730 (5’ 8”)
mm (in)
Pilot operated lift and tilt circuit,
single-lever(joystick) control
standard.
Lift circuit
The valve has four functions ;
raise, hold, lower and float.
Can adjust automatic kickout
from horizontal to full lift.
Tilt circuit
Cylinder
Lift
Tilt HL730-7
HL730TM-7
Cycle time
Raise (with load)
Dump
Lower (empty)
Total sec
at carry
mm (ft-in) 6,810 (22’ 4”) 6,880 (22’ 7”) 7,190 (23’ 7”)
mm (ft-in) 4,790 (15’ 9”) 4,870 (16’) 5,120 (16’10”)
mm (ft-in) 3,640 (11’ 11”) 3,780 (12’ 5”) 3,970 (13’)
2,315 (7’ 7”)
2,430 (8’)
Helical gear type, 78 liters/min
@ governed rpm
(25 USgpm)
H. Wheelbase
mm (ft-in)
2,750 (9’)
2,750 (9’)
2,750 (9’)
I.
mm (ft-in)
370 (1’ 3”)
370 (1’ 3”)
370 (1’ 3”)
Cylinder
Ground clearance
Type
Double acting
Bore x stroke
60mm(2.4") x 390mm(15.4")
40o(each direction)
mm (ft-in) 3,030 (9’ 11”) 3,030(9’ 11”) 3,030(9’ 11”)
K. Height over cab
mm (ft-in) 3,170 (10’ 5”) 3,170 (10’ 5”) 3,170 (10’ 5”)
on ground
deg
42
50
42
at carry
deg
48
54
49
deg
48
50
48
M. Dump angle
mm (ft-in) 11,190 (36’9”) 11,200 (36’ 9”) 11,510 (37’ 9”)
Clearance circle
N. Overall width
Features
- Center-point frame articulation.
- Load-sensing system.
- Steering-wheel operated metering pump controls
flow to steering cylinders.
- Tilt and telescopic steering column.
mm (ft-in)
Description
Bucket capacity
202 liters (53.4 USgal)
Type : Double acting
No. of cylinders-bore x stroke;
2-105 mm(4.1") x 772 mm(30.4")
1-120 mm(4.7") x 510 mm(20.1")
2-95 mm(3.7") x 775 mm(30.5")
Cooling system
30 liters (7.9 USgal)
Crankcase
11 liters (2.9 USgal)
Transmission
20 liters (5.3 USgal)
Front axle
18.4 liters (4.9 USgal)
HL730-7 / HL730XTD-7
5.4 sec
1.0 sec
2.6 sec
9.0 sec
Rear axle
18.4 liters (4.9 USgal)
Hydraulic tank
95 liters (25.1 USgal)
Hydraulic system
160 liters (42.3 USgal)
(including tank)
2,450 (8’)
2,400 (7’ 10”)
2,450 (8’)
Overview
HL730-7
HL730TM-7 HL730XTD-7
UNIT
kg (lb) 9,700 (21,400) 10,000 (22,050) 9,900 (21,830)
Operating weight
Service refill capacities
2,630 (8’ 8”)
J. Height over exhaust
L. Roll-back angle
Fuel tank
HL730TM-7
5.4 sec
1.4 sec
2.4 sec
9.2 sec
128 (5.0”)
7,200 (23’7”)
E. Overall height (fully raised)
Heaped
m3 (yd3)
1.8 (2.4)
1.6 (2.1)
1.8 (2.4)
Struck
m3 (yd3)
1.5 (2.0)
1.4 (1.8)
1.5 (2.0)
Breakout force-bucket
The valve has three functions ;
tilt back, hold and dump.
Can adjust automatic bucket
positioner to desired load angle.
95 (3.7”)
mm (ft-in)
Relief valve setting 210 kg/cm2 (2,990 psi)
Type
80 (3.1”)
on ground mm (ft-in) 6,850 (22’ 6”) 7,000 (23’)
G. Front overhang
Two function valve with single or
two lever controls :
Optional third-function valve
with auxiliary lever.
210 kg/cm2 (2,990 psi)
Steering angle
3,060 (10’)
Full hydraulic power steering
Pump
Pilot oil pressure is generated
by the pilot oil supply unit.
30kg/cm2 (427 psi)
mm (ft-in) 2,730 (8’ 11”) 2,785 (9’ 2”)
F. Bucket pivot max. height
Helical gear type, 140 liters/min
(37.0 USgpm)@governed rpm
Bucket controls
Transmission
Steering system
HL730TM-7 HL730XTD-7
Full lift
C. Digging depth
D. Overall length
Type
HL730-7
General purpose bolt-on cutting edge
Bucket Type
A. Dumping clearance at max.
height and 45o dump angle.
18.0 : 1
24V, 70 Amp
Starting motor
Specifications & Dimensions 10
Parking brake
B. Reach
Battery
Reverse
Service brakes
Hydraulically actuated, wet disc
brakes actuate all 4 wheels
independent axle-by-axle system.
Single pedal braking including
clutch cut off switch.
Spring-applied, hydraulically
released wet disc brake in
front axle.
When brake oil pressure
drops, indicator light alerts
operator and parking brake
automatically applies.
Dry, dual elements
Alternator
Forward
Dimensions
Brakes
Tipping load
kg (lb) 9,590 (21,140) 10,090 (22,240) 9,520 (20,990)
Straight
kg (lb) 7,880 (17,370) 6,640 (14,640) 7,020 (15,480)
Full turn
kg (lb) 6,790 (14,970) 5,710 (12,590) 6,040 (13,320)
Tires
Type
Tubeless, loader design tires
Standard
17.5-25, 12 PR, L3
Options include
17.5-25, 12 PR, L2
17.5 R25 XHAᵂ
Specifications & Dimensions 11
Download PDF
Similar pages