HP Integrity BL860c i4 Server Blade

QuickSpecs
HP Integrity BL860c i4 Server Blade
Overview
1. 3 x PCIe Mezzanine Slots
2. 24 x DDR3 DIMM Slots
3. 2 x SFF SAS HDDs, hot-swap bays
4. Two Intel® Itanium® processor 9500 series sockets
What's New
Intel® Itanium® processor 9500 series 8-core and 4-core processors
33% increase in memory bandwidth via 6.4GT/s Quick Path Interconnect (QPI) links
Faster (1067 MT/s) and Low Voltage PC3L-10600 Registered CAS 9 Memory DIMMs
Dynamic CKE, for economical use of power resources
Four integrated 10Gb Converged Network Controllers in an FCoE LAN on Motherboard (LOM) implementation
Embedded SAS read only 512MB cache
At A Glance
This document covers the HP Integrity BL860c i4 server blade only. For more information on HP BladeSystem c-Class Enclosures
and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
The HP Integrity BL860c i4 delivers the performance, reliability, and availability on HP's 64-bit operating system HP-UX 11i v3 for
the ultimate in scalability and flexibility in deployment. To further enrich your cost-efficient, consolidated Integrity blade
infrastructure, Virtual Server OE (VSE-OE) can help with solution components such as HP-UX Virtual Partitions (vPars) v6.1, HP
Integrity Virtual Machines (Integrity VM), HP Capacity Advisor, HP Global Workload Manager, and automation through HP
Infrastructure Orchestration. Additionally, High Availability OE (HA-OE) provides high availability via the HP Serviceguard
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 1
QuickSpecs
HP Integrity BL860c i4 Server Blade
Overview
clustering technology and Data Center OE (DC-OE) brings the best of the virtualization capabilities along with high availability
together in one integrated OE
HP Integrity BL860c i4 server blade includes:
Processor:
o Up to two Intel® Itanium® 9500 Series processors
Memory:
Up to 384 GB of memory. Supporting (24) DDR3 registered memory modules (R-DIMMs)
Storage Controller:
Embedded HP Smart Array p410i SAS Controller
RAID 1, RAID 0, and HBA mode configuration options
Embedded SAS read only 512MB cache
Internal Drive Support:
Supports up to (2) two small form factor (SFF) SAS hot plug hard drives
Network Controller:
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting 10Gb/1Gb autosensing Ethernet, FCoE,
Flex-10, and TCP/IP offload engine
NOTE: FlexFabric capability requires OS drivers and the use of an HP Virtual Connect FlexFabric module. Learn
more at: www.hp.com/go/virtualconnect
NOTE: BL8x0c i4 server blades require Virtual Connect 3.70 or later when used in Virtual Connect configurations
Plus one (1) additional 10/100 NIC dedicated to Integrity iLO 3 Management
Mezzanine Support:
Three (3) additional I/O expansion slots via mezzanine cards.
Supports up to (3) mezzanine cards
HP NC553m Dual Port 10Gb FlexFabric Adapter
HP NC551m Dual Port 10Gb FlexFabric Adapter
HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
HP NC532m Dual Port Flex-10 10GbE BL-c Adapter
HP Emulex LPe1205 8Gb FC BL-c HBA (2-Port 8Gb Emulex FC HBA)
HP QMH 2562 8Gb FC BL-c HBA (2-Port 8Gb QLogic FC HBA)
HP Smart Array P711m/1G FBWC 6G SAS Controller
HP 4X QDR IB CX-2 Dual Port Mezz HCA for HP BladeSystem c-Class
HP NC364m 4-Port 1GbE BL-c Adapter
HP NC360m 2-Port 1GbE BL-c Adapter
USB Support:
One (1) internal USB port on the BL860c i4
Two (2) External USB ports on the BL860c i4 via SUV cable
Management:
HP Integrity Server Blades Management Software
Integrity Integrated Lights-Out 3 (iLO 3) management processor
HP Insight Control
HP System Management Homepage
HP-UX 11i Management Software for Integrity Blades, www.hp.com/go/hpuxblades
HP Ignite-UX
HP Software Assistant (SWA)
HP Dynamic Root Disk (DRD)
HP BladeSystem Infrastructure Management Software:
HP BladeSystem c-Class Onboard Administrator
HP BladeSystem c-Class Virtual Connect
Enterprise Management Software
Data Protector Software
GlancePlus Pak
Performance Manager and Agent
Virtualization with HP Matrix OE www.hp.com/go/matrixoe
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 2
QuickSpecs
HP Integrity BL860c i4 Server Blade
Overview
Advanced Infrastructure Management
HP Capacity Advisor (which includes HP Virtualization Manager))
HP Matrix OE infrastructure orchestration
HP Systems Insight Manager
Virtualization Continuum
HP-UX Virtual Partitions (vPars) v6.1
HP Integrity Virtual Machines (with HP-UX Guest OS's)
HP Process Resource Manager/pSets
HP-UX Containers
HP Matrix OE - Matrix OE Reference Architectures
Continuous Availability
HP Serviceguard for HP-UX 11i
HP Serviceguard Extensions for SAP
HP Serviceguard Extensions for Oracle
HP Continentalclusters
Form Factor:
HP Integrity BL860c i4 server blade is a full-height, BladeSystem c-Class form factor. The BL860c i4 server blade
plugs into the BladeSystem enclosure. In the c7000 enclosure, 8 server blades are supported per 10U enclosure. 4
enclosures can be configured to a standard 42U rack; 32 BL860c i4 server blades can be configured in a fully
populated rack. In the c3000 enclosure, 4 BL860c i4 server blades are supported per 6U enclosure.
Enclosures:
HP offers two different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 8 HP Integrity BL860c i4 servers
plugged vertically. Four (4) enclosures can be configured to a standard 42U rack
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 4 HP Integrity BL860c i4 servers
plugged horizontally. Up to 7 enclosures can be configured to a standard 42U rack
The HP BladeSystem c3000 Enclosure targets three separate market segments:
Remote sites needing between 2 and 8 server blades
Mid-sized companies with between 3 and 100 servers in their company
Enterprise accounts with special datacenter requirement, such as DC power, or very limited rack power
and cooling capacity.
Server blades, storage blades, and interconnect modules are all designed to fit into the c7000 and c3000 enclosures.
For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
Warranty:
Protected by HP Services and a worldwide network of HP Authorized Channel Partners. Three-year parts, 3 Year
Labor and 3 Year on-site limited global warranty. Certain restrictions and exclusions apply. Hard drives have either a
one year or three year warranty; refer to specific hard drive QuickSpecs for details
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 3
QuickSpecs
HP Integrity BL860c i4 Server Blade
Standard Features
Processor
One of the following
depending on Model
Octo-Core Processors
Intel® Itanium® 9560 2.53GHz/8-core/32MB/170W Processor
Intel® Itanium® 9540 2.13GHz/8-core/24MB/170W Processor
Quad--Core Processor
Intel® Itanium® 9550 2.4GHz/4-core/32MB/170W Processor
Intel® Itanium® 9520 1.73GHz/4-core/20MB/130W Processor
Upgradeability
Upgradeable to two (2) processors
NOTE: The HP Integrity BL860c i4 supports 1 or 2 processor configurations. Processors must be
identical.
Cache Memory
One of the following
depending on Model
All Processors support
L3 cache; up to 32MB, see processor specifics
Total 54 MB on-die cache
Chipset
Intel Boxboro
Memory
Type
DDR3 registered memory modules (R-DIMMs)
Minimum
8 GB (2 x 4 GB DIMMs)
Maximum
384 GB (24 x 16 GB)
NOTE: Memory kits are DIMM pairs.
Network Adapter
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting 10Gb/1Gb autosensing
Ethernet, FCoE, Flex-10, and TCP/IP offload engine
NOTE: FlexFabric capability requires OS drivers and the use of an HP Virtual Connect FlexFabric
module. Learn more at: www.hp.com/go/virtualconnect
NOTE: BL8x0c i4 server blades require Virtual Connect 3.70 or later
Single bit cache error correction
50 bit physical addressing
64 bit virtual addressing
Integrated memory controllers and Scalable Memory Interconnect (SMI)
Intel Instruction Replay Technology
Enhanced instructions-level parallelism
Enhanced Intel Hyper Threading, with Dual-Domain Multi-Threading support
Intel Cache Safe Technology
Residual error protection for floating point operations
Thermal logic technologies
Dynamic CKE, for additional power savings with memory DIMMs
One (1) additional 10/100 NIC dedicated to Integrity iLO 3 Management
Up to twelve additional Gigabit Ethernet ports via the NC364m Quad-port mezzanine adapter or six
additional 10 Gigabit Ethernet ports via the NC552m or the NC532m dual-port mezzanine adapters.
Expansion Slots
Three Mezzanine slots, two (2) Type II and one (1) Type I, PCIe x8 Gen2
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 4
QuickSpecs
HP Integrity BL860c i4 Server Blade
Standard Features
Integrated ManageabilityIntegrity Integrated Lights-Out 3 (iLO 3)
Factory installed Integrity iLO 3 Advanced Pack license
HP BladeSystem c-Class Onboard Administrator
HP BladeSystem c-Class Virtual Connect
Storage Controller
HP Smart Array p410i
3Gb SAS Controller
2 SAS Channels (one to each HDD)
Supports RAID 1, RAID 0, and HBA mode options
Embedded SAS read only 512MB Cache
Maximum Internal
Storage
Hot Plug SAS
1.8TB SAS
Graphics
Integrated ATI RN-50 1280 x 1024 x 16M color (128 MB DDR memory)
Resolution Color Depths Depths 1280 x 1024, 16.7M , 64k, 256,16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
FlexFabric Support
Four (4) ports via Two HP NC553i 10Gb 2-port FlexFabric Converged Network Adapters integrated on
system motherboard
Dual (2) ports via HP BLc NC553m Dual Port FlexFabric 10Gb Converged Network Adapter
Dual (2) ports via HP BLc NC551m Dual Port FlexFabric 10Gb Converged Network Adapter
NOTE: BL8x0c i4 server blades require Virtual Connect 3.70 or later
NOTE: Each port supports 10GbE Ethernet or 8Gb FCoE traffic.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information and for HPUX support.
HP NC551m: http://h18004.www1.hp.com/products/quickspecs/13649_div/13649_div.html
HP NC553m: http://h18004.www1.hp.com/products/quickspecs/13737_div/13737_div.html
InfiniBand Support
Optional InfiniBand HCAs are supported by the HP Integrity BL860c i4 Server Blade. The mezzanine
circuit board connects directly to the server blade system board.
2 x 900GB SAS
HP 4X QDR InfiniBand ConnectX-2 Dual Port Mezzanine HCA for c-Class BladeSystem (PN 592519B21)
Features:
Negotiates to DDR/QDR speeds
Dual ports for redundant path connections
Support for HP-UX 11i v3
Supported with HP 4X QDR InfiniBand Switch Module for c-Class BladeSystem (PN 489184B21).
For details specifications, please visit:
http://www.hp.com/products1/serverconnectivity/adapters/infiniband/specifications.html
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 5
QuickSpecs
HP Integrity BL860c i4 Server Blade
Standard Features
Fibre Channel Support Optional Fibre Channel HBAs are supported by the HP Integrity BL860c i4. The mezzanine circuit
board connects directly to the server blade system board.
8Gb Fibre Channel Host Bus Adapters:
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
(PN 451871-B21)
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
(PN 456972-B21)
8Gb Fibre Channel HBAs feature:
8/4/2/1Gb/s auto negotiating speeds
Dual ports for redundant path connections
Optimized for HP Storage and supported by third party SAN vendors
Support for HP-UX 11i v3
Compatible SAN
HP Integrity BL860c i4 server blades are optimized for HP Storage MSA, EVA, and XP products.
Smart Array Controller Optional Smart Array Controller is supported by BL860c i4. The mezzanine circuit board connects
Support
directly to the server blade system board, and provides connection to off-blade SAS storage via a SAS
interconnect switch module in the HP BladeSystem enclosure.
HP Smart Array P711m/1G FBWC 4-ports Ext PCIe x8 6G SAS Controller (PN 513778-B21)
Provides support for HP Zoned Storage for BladeSystem
Zoned Storage solution requires compatible HP Storage 600 Modular Disk System and HP
Storage 3Gb SAS BL Switch
Supports RAID 6 with Advanced Data Guarding (ADG)
Provides support for HP P2000 G3 MSA
Support for HP P2000 G3 MSA requires HP Storage 6Gb SAS BL Switch
NOTE: For additional details please see:
http://h18004.www1.hp.com/products/quickspecs/14035_div/14035_div.html
HP USB Options
External USB DVD drive with 7 ft USB extension cable is supported with c7000 enclosures.
The solution includes the following components:
External USB DVD drive with 9-inch USB cable
Power adaptor, power cable and USB Y-connector
7-foot USB extension cable
NOTE: The USB Y-connector goes between the extension cable and the 9-inch USB cable fixed with
DVD drive.
NOTE: The Y-connector should NOT be placed between the server blade and the 7-foot Extension
cable.
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 6
QuickSpecs
HP Integrity BL860c i4 Server Blade
Standard Features
Integrity Server Blades
Management Software
and HP Integrity
Essentials Software
Plug-ins
HP-UX 11i Management
Software for HP Integrity
BL860c i4 Server Blade
and HP BladeSystem
Getting Started
HP Systems Insight Manager
HP Insight Control for HP-UX 11i
HP-UX 11i System Management
HP BladeSystem Integrated Manager in HP System Insight
Manager
HP Onboard Administrator
HP BladeSystem c-Class Onboard Administrator Firmware
HP BladeSystem c-Class Virtual Connect Firmware
HP Insight Control for HP-UX 11i v3 (Included in Base OE)
Deploy
HP Ignite-UX
Software Distributor-UX
Software Package Builder
Dynamic Root Disk (DRD)
Monitor
HP Systems Insight Manager
HP System Management Homepage
Glance Plus Pak
Performance Manager and Agent
HP Serviceguard Manager
Control
HP Integrity Integrated Lights-Out (iLO) 3 (standard with
BL860c i4 servers)
Integrity iLO 3 Advanced Pack license (included with BL860c i4
servers
Protect
HP-UX Bastille
HP-UX Containers
Data Protector Software
Software Assistant (SWA)
Optimize
HP Capacity Advisory
HP Global Workload Manager
Process Resource Manager
HP Insight Power Manager
HP-UX 11i v3 power management
Provision
HP Matrix OE infrastructure orchestration
Integrate
HP Business Technology Optimization
IT Management Software
HP Matrix OE for HP Integrity server blades
Learn More
For additional information on HP Integrity server blade
management software please visit:
http://h18004.www1.hp.com/products/servers/integrity-bl/cclass/860c/compmatrix.htm
Glossary of Integrity
HP BladeSystem
Server Blades
Integrated Manager in HP
Management Software Systems Insight Manager
Product Description
The HP BladeSystem Integrated Manager is a component in HP Systems
Insight Manager (SIM) that provides streamlined management for the entire
HP BladeSystem product family. The HP BladeSystem Integrated Manager
enables users to quickly navigate their HP blade environments including
blade servers, enclosure infrastructures, racks, and integrated switches, via
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 7
QuickSpecs
HP Integrity BL860c i4 Server Blade
Standard Features
automatically generated blade rack picture views and hierarchical trees.
Users are able to conveniently configure, deploy, and manage individual or
groups of blade systems. Additionally, users are able to quickly set up
logical collections of blade systems for convenient management and control.
HP Blades Visualization Used by System Administrators to identify, associate and group blades into
collections, using tables, trees, and picture views, and it can also be used to
monitor performance and launch Integrity Essentials.
NOTE: For more information about Manageability solutions for Integrity
Servers go to: http://www.hp.com/go/integrityessentials
HP GlancePlus Pak
HP GlancePlus Pak provides you with a single product for managing a
system's availability and performance. It is an integrated product that
includes HP GlancePlus and HP OpenView Performance Agent. As an
integrated product, the GlancePlus Pak includes the real-time diagnostic
capabilities of GlancePlus and the historical data collection capabilities of
the Performance Agent. The performance agent is used with other
availability and performance management products, thus providing an
integrated real-time and historical performance management solution.
HP Ignite-UX
HP Ignite-UX is a free toolset that enables a network install of HP-UX onto
for HP-UX Deployments multiple PA-RISC and/or Integrity servers on a network. It can also be used
to create custom install configurations, or golden images, recover systems
remotely, create custom recovery media including tape, CD and DVD, and
manage and monitor multiple client installation sessions.
HP Capacity Advisor
The capacity planning component of HP Capacity Advisor offers the
industry's first lightweight, integrated tool for ongoing capacity planning by
simulating the placement of application workloads to help IT administrators
improve server utilization. It captures real-world server utilization data to
pre-test different scenarios before making changes to critical applications.
HP Virtualization Manager, which is included with Capacity Advisor and
Global Workload Manager, provides a central point of control that allows
you to manage all the resources in your virtualized environment and a
powerful way to connect IT resources to real business needs.
HP Integrity Integrated
HP Integrity Integrated Lights-Out (iLO) management processors make it
Lights-Out (iLO) 3
simpler, faster, and less costly to remotely manage your Integrity servers.
(factory integrated with
HP iLO functions without additional software and can be accessed from any
BL860c i4)
location via a web browser. HP Integrity systems with iLO 3 ships with a buil
in Advanced Pack License so your Integrity blade is instantly ready to use
iLO Virtual Media and iLO power measurement.. iLO Advanced features
enabled in this release: Virtual Media, LDAP directory services, iLO power
measurement, and integration with Insight Power Manager. No additional
iLO licensing is needed.
NOTE: Please see www.hp.com/go/integrityilo for more information
HP Onboard
The Onboard Administrator for the HP BladeSystem enclosure is the brains
Administrator
of the new c-Class infrastructure. Together with the enclosure's HP Insight
Display, the Onboard Administrator has been designed for both local and
remote administration of HP BladeSystem c-Class. This module and its
firmware provides:
Wizards for simple, fast setup and configuration
Highly available and secure access to the HP BladeSystem
infrastructure
Security roles for server, network, and storage administrators
Automated power and cooling of the HP BladeSystem infrastructure
Agent-less device health and status
Thermal Logic power and cooling information and control
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 8
QuickSpecs
HP Integrity BL860c i4 Server Blade
Standard Features
NOTE: Please see http://www.hp.com/go/onboardadministrator for more
information.
HP Serviceguard
HP Serviceguard Manager is a graphical user interface (GUI) that provides
Manager
configuration, administration, and monitoring capabilities for Serviceguard,
Serviceguard Extension for RAC, Metrocluster, and Continentalclusters.
Using Serviceguard Manager, operators see color-coded icons that provide
a big-picture view of multiple clusters. From this big-picture view, operators
can drill down and proactively manage clusters, systems (nodes), and
packages that run applications.
HP Systems Insight
HP Systems Insight Manager (HP SIM) provides a unified, secure and
Manager
extensible environment to centrally manage servers, storage and other
infrastructure devices across multiple operating system platforms.
HP System Management HP System Management Homepage is a web-based interface that
Homepage
consolidates and simplifies the management of individual ProLiant and
Integrity servers running Microsoft Windows or Linux operating systems, or
HP 9000 and HP Integrity servers running HP-UX 11i. By aggregating data
from HP Insight Management Agents and other management tools, the
System Management Homepage provides a secure and intuitive interface to
review in-depth hardware configuration and status data, performance
metrics, system thresholds and software version control information. The
System Management Homepage can also be used to access the HP LightsOut Management processor on ProLiant and Integrity servers.
HP Matrix OE for HP
HP Matrix OE is advanced lifecycle management software for HP Integrity
Integrity servers
servers which enable you to instantly adjust to dynamic business demands with the new addition of infrastructure orchestration, not only can you easily
plan, configure, and automate your physical and virtual resources in the
same way, but now you can also provision and modify a complex
infrastructure in minutes.
HP-UX Software
HP-UX Software Assistant (SWA) is a command-line based tool that
Assistant (SWA)
consolidates and simplifies patch management and security bulletin
management on HP-UX systems. The SWA tool is new for HP-UX releases
as of January 2007, includes Security Patch Check (SPC), and is the HPrecommended utility to use to maintain currency with HP-published security
bulletins for HP-UX software.
HP-UX Workload
HP-UX Workload Manager (HP-UX WLM) is a resource management tool
Manager
that provides automatic CPU resource allocation and application
performance management based on your service-level objectives (SLOs)
and business priorities. WLM is most effective managing applications that
are CPU-bound. It automatically adapts system or partition CPU resources
(cores) to the demands, SLOs, and priorities of the running applications. (A
core is the actual data processing engine within a processor, where a single
processor can have multiple cores, and a core can support multiple
execution threads through Hyper-Threading, introduced with HP-UX 11i v3,
as discussed below.) It adjusts the CPU allocation of a group of processes
known as a workload, basing adjustment on the current needs and
performance of the applications in that workload.
HP Global Workload
The workload management capability for HP-UX Integrity servers is
Manager
provided by the HP Global Workload Manager component of HP Matrix
OEInsight Dynamics -- Matrix OEVSE. HP Global Workload Manager
(gWLM) is an intelligent policy engine that automatically allocates resources
among multiple workloads to increase server utilization while meeting
service levels for high-priority applications. Designed to work across multiple
HP-UX 11i, OpenVMS and Linux environments, the workload management
features are ideal for large, centralized IT environments that host
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 9
QuickSpecs
HP Integrity BL860c i4 Server Blade
Standard Features
HP Matrix
Performance Manager
and Agent
Process Resource
Manager
HP-UX Containers
Software Distributor-UX
OS Support
applications for many departments.
HP Matrix OE capabilities let you provision infrastructure in minutes to
automatically activate physical and virtual servers, storage, and networking
from pools of shared resources. Whether you need a single virtual machine
or infrastructure for a complex three-tier application, Matrix OE finds
available resources, streamlines the approval process, and automatically
provisions and configures what's needed across infrastructure silos.
Delivering infrastructure to the business becomes faster, more efficient, and
more reliable.
HP Performance Manager, Agents, and Monitor combine to provide a
powerful and flexible distributed management solution. This solution is a
single interface for centrally monitoring, analyzing, and forecasting resource
utilization for distributed multi-vendor environments, enabling you to offer
the best possible level of service in a cost-effective manner.
HP Process Resource Manager (HP PRM) is a resource management tool
used to control the amount of resources that processes use during peak
system load. HP PRM can manage allocation of the following resources:
CPU: Ensures a minimum allocation of CPU; can also simultaneously
cap CPU resource usage for each group in the configuration. (Starting
with HP-UX 11i v3, per-group capping is available.)
Memory: Ensures a minimum allocation of private real memory; can
also cap private memory usage. Allows you to allocate an exact
amount of shared memory.
Disk bandwidth: Ensures a minimum allocation of disk bandwidth
One method that Matrix OE uses to improve server resource utilization is to
consolidate multiple applications within a single operating system image.
HP-UX Containers combine kernel level security and prove resource
management to stack multiple applications within the same operating
system. HP-UX Containers and HP-UX Workload Manager can dedicate
specific resources to specific applications within an operating system image
avoiding resource contention issues. Using HP-UX Containers11i v3
Security Containment, organizations can ensure that application instances
cannot access processes or file from other applications or the system. This
ensures that multiple application instances run securely in a consolidated
environment, providing the benefits of consolidation while preserving the
security of a scale out environment. For software licensing purposes, the
maximum number of CPUs in HP-UX Containers can be capped. This
capability is part of the HP-UX Base Operating Environment (BOE).
Software Distributor (SD) is the HP-UX administration tool set used to
deliver and maintain HP-UX operating systems and layered software
applications. SD is delivered as part of HP-UX; you do not need to download
it separately.
HP-UX 11i v3 Data Center Operating Environment (DC-OE)
HP-UX 11i v3 Virtual Server Operating Environment (VSE-OE)
HP-UX 11i v3 High Availability Operating Environment (HA-OE)
HP-UX 11i v3 Base Operating Environment (BOE)
NOTE: For more complete and up to date information on HP-UX 11i support, please visit the HPUX11i website at: http://www.hp.com/go/hpux
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 10
QuickSpecs
HP Integrity BL860c i4 Server Blade
Standard Features
Supported Software
Options
HP Matrix OE - Matrix OE for HP Integrity servers (included within both the VSE-OE and DC-OE),
which includes the following capabilities for Integrity blades:
HP-UX Virtual Partitions (vPars) v6.1
HP Integrity Virtual Machines (VM)
HP Capacity Advisor
HP Global Workload Manager
HP Integrity Online VM Migration
HP Virtualization Manager
HP Serviceguard for HP-UX 11i
HP Serviceguard Manager
HP Serviceguard Extensions for SAP
HP Serviceguard Extensions for Oracle
HP Insight Control power management
GlancePlus Pak
Performance Manager and Agent
HA Monitors
MirrorDisk/UX
Intelligent ManageabilityHP Integrity Integrated Lights-Out 3 (iLO 3) Remote Management
Virtual serial console (Multiple, mirrored sessions, with previous context and console log buffer)
Virtual Media
Virtual Power Button Control
LDAP Directory Services
iLO 3 power measurement and integration with Insight Power Manager
Embedded system health and Integrity fault management Diagnostics and troubleshooting:
virtual front panel
log access to Integrity System Event Log
Forward Progress Log Blade power consumption reading
Dedicated LAN Connectivity
Automatic IP Configuration via DHCP/DNS/WINS browser
Command Line and scripted access Industry Standard RC4, 128-bit Secure Sockets Layer (SSL) and
Secure Shell (SSH) Security
Directory Services Integration (LDAP)
Support for 19 user accounts with customizable access privileges
NOTE:iLO 3 Advanced Pack license is included with every BL860c i4 server blade
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 11
QuickSpecs
HP Integrity BL860c i4 Server Blade
Standard Features
Availability
Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection
Two hot-plug SAS hard drive bays and integrated RAID (HP Smart Array p410i) controller on every
server blade
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load
balancing) supported on integrated LOMs and with add-in Mezzanine cards.
ECC protected DDR3 memory
Memory double chip spare to overcome two DRAM chip failures
Dynamic Processor resilience and deallocation with HP-UX
Journal file system with HP-UX*
Auto reboot
HP Serviceguard for HP-UX*
HP Serviceguard Extension for RAC for HP-UX*
HP Serviceguard Extension for SAP for HP-UX*
Serviceguard Manager for HP-UX Clusters*
HP Event Monitoring Service
HA Monitors for HP-UX
HA Toolkits for HP-UX
HP Mirrordisk/UX* (Included if purchase HP-UX 11i VSE-OE, HA-OE or DC-OE)
Extended Campus Cluster*, HP Metrocluster*, and HP Continentalclusters* for HP UX
HP System Insight Manager (SIM) for proactive fault management
HP Serviceguard Storage Management Suites for HP-UX*
NOTE: *Fee based software products.
Industry Standard
Compliance
Security
ACPI 2.0 Compliant
PCIe 2.0 Compliant
WOL Support
USB 2.0 Support
Hardware Security
Administrator's password
Integrity iLO 3 access control- 19 customizable local user accounts with assignable rights for
power, console, configuration, etc.
OA and Integrity iLO 3 Directory Services Integration (LDAP)
Integrity iLO 3 access via SSL encryption or SSH
Integrity iLO 3 access methods via web, SSH, etc. can be disabled
SSL encryption on web console
Trusted Platform Module (TPM) option for secure cryptographic key storage, integrates with HPUX security features
Platform security fundamentals
For the past 25 years HP has been building one of the most trustworthy and secure UNIX operating
systems on the market. Designed for the optimal protection against both external and internal threats.
HP-UX 11i offers industry-leading breadth and depth of UNIX security features. Focused on
comprehensive security integration aimed at proactively mitigating risk, reducing compliance cost and
accelerating time to implementation, HP-UX security solutions significantly lower IT costs. This set of
fully integrated and complementary features is designed to provide layered security with in-depth
protection of all your enterprise assets by protecting all these aspects of data, systems, data and
identity security. HP-UX independently validates its comprehensive security portfolio through Common
Criteria security evaluations. For more details, visit: www.hp.com/go/hpux11isecurity
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 12
QuickSpecs
HP Integrity BL860c i4 Server Blade
Standard Features
Protecting systems:
One critical factor in enterprise security is system minimization and hardening. HP-UX 11i offers a set
of security features designed to address known and unknown vulnerabilities by running only the
services that are needed, thus minimizing a potential point of attack. The following security features
have built-in mechanisms not only to minimize and harden the system, but also to detect and react to
attack in real time:
Bastille system hardening
Host Intrusion Detection System
Secure Resource Partitions
IPFilter - firewall technology
Software Assistant (security bulletin currency)
Install-time Security
Boot Authentication
Standard Mode Security Extensions
Shadow Passwords
Strong Random Number Generator
Protecting data:
HP-UX 11i offers data protection in many forms: protecting data in transit, in use and at rest. By using
security features designed to protect data in its three forms, HP-UX 11i customers can minimize
possible breaches not only in terms of data loss, but in customer trust as well. Several security
features offer data protection capabilities to HP-UX customers:
Encrypted volume and file system
Trusted Computing Services
Security containment
OpenSSL
IPSec
Secure Shell
MD5sum
Protecting Identity:
In modern day global enterprise companies, managing identity is not an easy task , especially as
identity management requirements grow to include employees, contractors, partners and suppliers
across many countries with various privacy protection laws and regulation. HP-UX 11i dramatically
simplifies this critical task by integrating various identity management technologies which offer ease of
use and adherence to compliance regulation:
Identity Management Integration
Select Access for IdMI
Role-based Access Control
AAA Server
HP Directory Server for HP-UX
LDAP-UX Client
Kerberos Server
Kerberos Client Services
PAM Kerberos
HP also offers many additional security features available through open source software for HP-UX.
Common Criteria certification
Many enterprise and government customers require this vendor-independent security certification
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 13
QuickSpecs
HP Integrity BL860c i4 Server Blade
Standard Features
because it increases confidence in the product's security assurance, functionality, quality and
effectiveness. Many governments, including the United States, require certification for government IT
procurement.
Certification evaluations are only conducted by the evaluation agency after release of the product. HPUX 11i v3, has been actively evaluated to the Common Criteria (CC) Security standards for many
years. A history of our achievements include:
February 2003: Certification of HP-UX 11i V1 achieves A CC to Evaluation Assurance Level 4
May 2006: Certification of HP-UX 11i V2 to the current EAL4 Common Criteria
May 2008: Certification of HP-UX 11iV3 achieved including hard partitions (nPars)
December 2009: Certification of HP-UX 11iV3 to CCOPP profile including soft partitions (vPars)
Common Criteria certifications continue to be an integral part of our HP-UX comprehensive security
portfolio. HP-UX 11i v3 has successfully completed a new Commercial off the Shelf (COTS)
Compartmentalized Operations Protection Profile (CCOPP) evaluation. This new CCOPP evaluation
encompasses the extensive range of security solution for HP-UX 11i v3 including soft partitioning or
Virtual partitions (vPars) as well as the previously certified hard partitions (nPars).
Factory Express
HP Factory Express offers configuration, customization, integration and deployment services for HP
Portfolio for Servers and servers and storage products. Customers can choose how their factory solutions are built, tested,
Storage
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array
of servers and storage: HP Integrity, HP ProLiant, HP Integrity Server Blades, HP ProLiant Server
Blades, HP BladeSystem, HP 9000 servers as well as the MSA1xxx, VA7xxx, EVA, XP, rackable tape
libraries and configurable network switches.
For more information on Factory Express services for your specific server model please contact your
sales representative or go to: http://www.hp.com/go/factory-express.
HP Simple Configurator SCE is a guided self service tool to help sales and non technical people provide customers with initial
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use
in your existing ordering processes. If you require "custom" rack configuration or configuration for
products not available in SCE, please contact HP's Customer Business Center or an Authorized
Partner for assistance. http://www.hp.com/products/configurator
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 14
QuickSpecs
HP Integrity BL860c i4 Server Blade
Standard Features
Service and Support
HP Care Pack Services are available for the HP Integrity BL860c i4 server blade. These services offer
integrated hardware and software support to help customers maintain a robust, stable, flexible IT
environment that enhances their business agility. They encompass today's most popular products,
including UNIX, Windows and Linux servers, as well as mobile technology, network devices, desktops,
printers, storage solutions, management software and more.
All of these Service offerings let customers leverage HP Services multi-vendor, multi-technology
experience and expertise; global reach with delivery capabilities; single-point-of-contact problem
diagnosis and resolution; advanced remote monitoring and performance enhancement technologies;
and proven support management processes based on IT best practices.
HP Services professionals can help customers identify the support offering that fits their business and
technology goals. HP Services include:
HP Critical Service - comprehensive preventive services and super-responsive support to
maximize availability and minimize downtime risk exposure in mission-critical environments
HP Proactive 24 Service - collaborate with HP Services professionals to improve operational
effectiveness, performance, and stability through joint services planning and 24x7
hardware/Software Support
Support Plus 24 - 24x7x365 onsite hardware and over-the-phone Software Support for HP and
selected multi vendor products, plus software updates at substantial subscription savings
Support Plus - the economical choice for single-source hardware/Software Support delivered
during extended business hours, as well as cost-saving software updates
These products are covered by a global limited warranty and supported by HP Services.
A complete range of HP Care Pack services are available including:
Proactive Select - a cost effective method of buying service credits up front to be used for
consultancy and service options as needed.
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours,
7 days call window with options including 4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support.
NOTE: For more information regarding the Blade service portfolio visit our worldwide web site on the
internet at: http://h20219.www2.hp.com/services/cache/81725-0-0-225-121.html
HP Services for the c7000 Enclosure cover the enclosure, power supplies and fans. HP qualified rack
options are covered by these services when installed within the same rack. HP Supported Ethernet
devices covered include the Ethernet Pass-Through Module, Fibre Channel Pass-Through Module and
GbE2c Ethernet Blade Switch and Cisco Catalyst 3020 Blade Switch.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/bladesystemservices
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 15
QuickSpecs
HP Integrity BL860c i4 Server Blade
Support Services
HP Technology Services-consultants and support experts to solve your most complex infrastructure problems. We help keep your
business running, no matter what. Boost availability and avoid downtime, trust our expertise to optimize your HP solution.
HP Care Pack Services: Packaged server and storage services for increased uptime, productivity and ROI
When you buy HP server and storage products and solutions, it's also a good time to think about what levels of support you may
need. Our portfolio of service options reduce deployment and management worries while helping you get the most out of your
server and storage investments. We take a holistic approach to your environment, bridging servers, blades, storage, software and
network infrastructures with our packaged HP Care Pack Services for servers and storage.
Protect your business beyond warranty
When it comes to robustness and reliability, standard computing equipment warranties have matured along with technology. Good
news that can also create problems stemming from depending on standard warranties designed to only protect against product
defects and some downtime causes. Using a standard approach to warranty uplifts, such as HP Care Pack Services, helps
reduce downtime risks and provides operational consistency for mission-critical and standard business computing.
HP Care Pack Services: Upgrading or extending standard server and storage warranties cost effectively
HP Care Pack Services offer a standard reactive hardware and software support services suite sold separately, or combined with
our Support Plus and Support Plus 24 services. The portfolio also provides a combination of integrated proactive and reactive
services, such as Proactive 24 Service and Critical Service. In addition with HP Proactive Select, you can acquire the specific
proactive constancy and technical services. HP Proactive Select menu offers a broad set of service options that you can mix and
match depending on your specific requirements. Proactive service options include offers for server, storage, network, SAN device,
software, environment and education services.
HP server and storage lifecycle support services offers a full spectrum of customer care-from technology support to complex
migrations to complete managed services. HP Factory Express provides customization, integration and deployment services for
turnkey solutions. HP Education Services offer flexible, comprehensive training on to help your IT staff get the most out of your
server and storage investments. HP Financial solutions extend innovative financing and cost-effective asset management
programs-from purchase to equipment retirement. Depending on a customer's individual support needs, customers' can choose
from three conveniently structured support solutions. The support recommendations listed below generally apply to the server and
the complete system. Options should be covered at the same service level as the associated installed system.
Choose the right level of support, deployment and professional integration services for your requirements and expectations:
Learn more: www.hp.com/services/servers and www.hp.com/services/storage
NOTE: Care Pack Services availability may vary by product and country.
Recommended HP Care Pack Services for optimal satisfaction Integrity Servers:
Optimized Care
3-Year HP Critical Service:
HP Critical Service (CS) provides a complete support solution designed for businesses that run essential mission-critical
applications, which cannot tolerate downtime without a significant business impact. This 3-year, comprehensive service provides
the right combination of proactive and reactive support designed to improve availability and performance across your IT
infrastructure. With fewer interruptions and less downtime, you will lower costs and gain competitive advantages in the
marketplace. HP Critical Service provides highly-trained professionals with world-class skills and a commitment to understand
both your enterprise technology requirements and your business objectives. In today's new era of business technology,
technology must produce thousands of business outcomes. Today's HP Technology Services portfolio helps customers manage
their technology in action-because when technology works, business works.
Boost business productivity through increased availability and decrease business losses caused by IT downtime
Reduce risk and improve efficiency by proactively managing changes across the environment with no interoperability gaps
Resolve complex problems quickly through direct access to HP Services expertise and support from a team familiar with
business and technology infrastructure
Free IT staff to focus on strategic business issues and increase customer satisfaction
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 16
QuickSpecs
HP Integrity BL860c i4 Server Blade
Support Services
http://h20195.www2.hp.com/v2/GetPDF.aspx/5982-0079EN.pdf
HP Factory Express Package 5 Service: HP designed Solution
HP Factory Express Service Package 5 provides you with all of the configuration, racking, and installation services of Packages 3
and 4, along with advice and technical assistance. Utilize this service if you want help in designing your solution. HP Factory
Express Service Package 5 allows you to leverage HP's factory capabilities along with those of an HP services consultant and
field delivery specialist to deliver a solution that helps address your unique needs and requirements.
The service is recommended if you want to benefit from HP's design and configuration skills by having an HP consultant work
directly with you to recommend and develop technical specifications for the solution that will help address your performance and
availability goals.
Service benefits
An HP-designed and configured solution based on accurate data that you provide to HP about your requirements
Dedicated team engagement and collaboration with you from planning through implementation
Enhanced IT resources and operations
A solution designed by a team of HP engineering specialists to your specifications in accordance with ISO 9000: 2000
quality standards and then built, tested, shipped, and deployed with skilled onsite deployment assistance
An HP-designed and configured solution based on accurate data that you provide to HP about your requirements
Dedicated team engagement and collaboration with you from planning through implementation
Enhanced IT resources and operations
A solution designed by a team of HP engineering specialists to your specifications in accordance with ISO 9000: 2000
quality standards and then built, tested, shipped, and deployed with skilled onsite deployment assistance
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-9994EN.pdf
Standard Care
3-Year HP Proactive 24
As an alternative to our recommended support level, for customers who want enhanced operational effectiveness and proactive
problem identification:
HP Proactive 24 Service (P24) integrates hardware and software support to help you improve the stability and operational
effectiveness of your IT environment. An HP Account Manager acts as your primary point of contact to ensure that HP meets your
support needs effectively.
P24 provides the maximum value when multiple technologies in the environment (e.g. servers, storage, SAN and the network),
are all covered. It provides an environment-wide view and consistent support of all of these components which affect stability of
your key applications.
Choose P24 when you want to:
enhance operational effectiveness with proactive problem identification and recommendations from HP
partner with technical experts who help coordinate support, provide hands-on assistance, and share knowledge with your
staff
rapidly access support and expertise spanning your environment
obtain personalized services tailored to your business environment and critical success factors
anticipate necessary change - and execute it correctly the first time
efficiently manage infrastructure resources to meet your performance objectives
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-1614ENN.pdf
Server Installation
HP provides onsite new hardware installation and software deployment of the Blade server. HP provides configuration and testing
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 17
QuickSpecs
HP Integrity BL860c i4 Server Blade
Support Services
of BladeSystem Ethernet interconnect switches, facilitating proper implementation of network protocols and access to advanced
features.
Basic Care
3-Year HP Support Plus 24
For a higher return on your server and storage investment, HP Support Plus 24 provides integrated hardware and software
support services designed specifically for your technology. Available 24x7, this 3-year combined reactive support option delivers
onsite hardware support and over-the-phone software support around-the-clock. Leverage the full strength of HP Technology
Services - customers can trust the services professionals at HP to work collaboratively with them, putting our strategic and
technical know-how to work across their entire infrastructure.
Improve uptime with responsive hardware and software services
Enjoy consistent service coverage across geographically dispersed sites
Update HP software at a predictable cost
Increase customer satisfaction-with no interoperability gaps
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6638EN.pdf
Server Installation
HP provides onsite new hardware installation and software deployment of the Blade server. HP provides configuration and testing
of BladeSystem Ethernet interconnect switches, facilitating proper implementation of network protocols and access to advanced
features.
Relate Services
HP Proactive Select Service
For customers that need the flexibility of choosing from a variety of service activities ranging from assessments,
performance analysis, firmware management, and infrastructure solution support to technical forums.
These service activities cover a broad spectrum of IT technology domains including servers, blades,
operating systems, storage, SANs, networks, third party software, virtualization, power and cooling,
management software, security and ITSM. The end result is a solution that is designed by you to help
you meet your IT and business goals. Customers can buy Proactive Select Service Credits when you purchase your hardware
and then use the credits over the next 12 months.
Service benefits
HP Proactive Select services help you to:
Access a list of flexible and customizable proactive service activities
Choose from a variety of service activities addressing both technology and process needs
Have the ability to change the Plan during the review meeting
Enhance your in-house IT team with complementary assistance from HP
Improve the time to solution
Reduce business risk and project costs by accessing HP specialists
Simplify IT operational procedures by leveraging HP best practices
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-4213ENW.pdf
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 18
QuickSpecs
HP Integrity BL860c i4 Server Blade
Support Services
eSupport
Insight Remote Support
Delivers secure remote monitoring and support for HP servers and storage, 24x7 at no additional cost. Available as part of HP
Warranty, Care Pack and Service Contract offers.
HP eSupport is a portfolio of technology-based services that assist you with managing your business environment - from the
desktop to the data center.
Support Portal
The HP support portal provides one-stop access to the information, tools and services you need to manage the daily operations of
your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service agreement. To access the support portal, visit
http://www.hp.com/support
HP Insight Remote Support software delivers secure remote monitoring and support for your HP Servers and Storage, 24 X 7, so
you can spend less time solving problems and more time focused on your business. You can have your systems remotely
monitored for hardware failure using secure technology that's been proven at thousands of companies around the world. In many
cases, you can avoid problems before they occur.
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 19
QuickSpecs
HP Integrity BL860c i4 Server Blade
Models
HP Integrity BL860c i4 Base Model
HP Integrity BL860c i4
(2P)
AM377A
Processor(s)
Supports up to two (2)
processors
Cache Memory
Memory
Network Adapter
Two (2) processor sockets; processor modules are configured to order
Storage Controller
One (1) additional 10/100 NIC dedicated to Integrity iLO 3 Management
Integrated HP Smart Array p410i SAS Controller
Embedded SSAS read only 512MB cache
Two SFF SAS drive bays; hard disk drives are configured to order
Three PCIe mezzanine card slots (PCIe Gen2 x8 interface); mezzanine
cards are configured to order.
None internal to blade server
Integrity iLO 3 and Integrity iLO 3 Advance Pack license included.
Up to 8 supported in HP BladeSystem c7000 Enclosure
Up to 4 supported in HP BladeSystem c3000 Enclosure
Hard Drives
IO expansion
Optical Drive
Integrity iLO 3
Form Factor
Included with processors
Twenty four (24) DIMM sockets; memory DIMMs are configured to order.
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting
10Gb/1Gb autosensing Ethernet, FCoE, Flex-10, and TCP/IP offload
engine
NOTE: FlexFabric capability requires OS drivers and the use of an HP
Virtual Connect FlexFabric module. Learn more at:
www.hp.com/go/virtualconnect
NOTE: BL8x0c i4 server blades require Virtual Connect 3.00 or later when
used in Virtual Connect configurations
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 20
QuickSpecs
HP Integrity BL860c i4 Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration
HP Models
HP Integrity BL860c i4 Server Blade
NOTE: Adding Option code "#0D1" to the Server Blade PN will integrate the
configured blade into the enclosure (which must be on the same order).
Configurable Model ships with:
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting
10Gb/1Gb autosensing Ethernet, FCoE, Flex-10, and TCP/IP offload engine plus
(1) additional 10/100 NIC dedicated to Integrity iLO 3 Management
AM377A
Integrated HP Smart Array p410i SAS Controller for internal HDDs
Integrated SAS read only 512MB cache
Two small form factor (SFF) SAS hot plug hard drive bays
HP Integrity Integrated Lights-Out 3
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted):
HP Processors
HP Memory
NOTE: Select minimum one (1) and maximum two (2) processors.
Octo-Core Processors
HP BL8x0c i4 Itanium 9540 (2.13GHz/8-core/24MB/170W) Processor Kit
HP BL8x0c i4 Itanium 9560 (2.53GHz/8-core//32MB/170W) Processor Kit
Quad-Core Processor
HP BL8x0c i4 Itanium 9520 (1.73GHz/4-core/20MB/130W) Processor Kit
HP BL8x0c i4 Itanium 9550 (2.4GHz/4-core/32MB/170W) Processor Kit
NOTE: Select minimum one (1) (2x4GB DIMMs) memory kit per server, and
maximum of six (6) memory kits per server (12 memory kits if 2 processors
ordered)
HP BL8x0c i4 8GB (2x4GB) PCL3-10600 Registered CAS 9 Memory Kit
HP BL8x0c i4 16GB (2x8GB) PCL3-10600 Registered CAS 9 Memory Kit
HP BL8x0c i4 32GB (2x16GB) PCL3-10600 Registered CAS 9 Memory Kit
NOTE: Memory kits consist of pairs of DIMMs.
NOTE: DIMMs must be installed in pairs.
NOTE: Minimum memory requirement is 8GB.
AM383A
AM382A
AM385A
AM384A
AM386A
AM387A
AM388A
Step 3: Choose Additional Options for Factory Integration
HP Hard Drives
NOTE: Hard drives have either a one year or three year warranty; refer to
specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
718160-B21
Page 21
QuickSpecs
HP Integrity BL860c i4 Server Blade
Configuration Information - Factory Integrated Models
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
NOTE: Though the disks are 6Gb, implementation of the embedded HP Smart
Array p410i SAS RAID controller limits performance of disks to 3Gb.
6G SAS Hot Plug Enterprise Performance Solid State Drives
HP 200GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty
Solid State Drive
HP 400GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty
Solid State Drive
HP Ethernet Mezzanine HP NC364m Quad Port 1GbE BL-c Adapter
Options
NOTE: Provides four additional Gigabit Ethernet ports per I/O expansion slot.
NOTE: BL860c i4 supports HP Virtual Connect Ethernet Interconnect Modules.
See: http://www.hp.com/go/bladesystem/virtualconnect for complete details.
HP NC360m Dual Port 1GbE BL-c Adapter
NOTE: Provides two additional Gigabit Ethernet ports per I/O expansion slot.
HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
NOTE: Provides Flex-10 connectivity when used in conjunction with the HP
Virtual Connect Flex-10 10Gb Ethernet Module for the c-Class BladeSystem
Option (P/N 455880-B21).
HP NC532m Dual Port Flex-10 10GbE BL-c Adapter
NOTE: Provides Flex-10 connectivity when used in conjunction with the HP
Virtual Connect Flex-10 10Gb Ethernet Module for the c-Class BladeSystem
Option (P/N 455880-B21).
HP FlexFabric
HP BLc NC551m Dual Port FlexFabric 10Gb Converged Network Adapter
Mezzanine Options
HP BLc NC553m Dual Port FlexFabric 10Gb Converged Network Adapter
NOTE: Provides Ethernet and FCoE connectivity when used in conjunction with
HP Virtual Connect FlexFabric 10Gb/24-Port Module (PN 571956-B21).
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
HP NC551m:
http://h18004.www1.hp.com/products/quickspecs/13649_div/13649_div.html
HP NC553m:
http://h18004.www1.hp.com/products/quickspecs/13737_div/13737_div.html
HP Virtual Connect FlexFabric Module
http://h18004.www1.hp.com/products/quickspecs/13652_div/13652_div.html
HP Fibre Channel
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class
Mezzanine Options
BladeSystem
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
NOTE: BL860c i4 supports HP Virtual Connect Fibre Channel Interconnect
Modules. See: http://www.hp.com/go/bladesystem/virtualconnect for complete
details.
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
619291-B21
581286-B21
581284-B21
627117-B21
507127-B21
512547-B21
632492-B21
632494-B21
447883-B21
445978-B21
610609-B21
467799-B21
580151-B21
613431-B21
451871-B21
456972-B21
Page 22
QuickSpecs
HP Integrity BL860c i4 Server Blade
Configuration Information - Factory Integrated Models
HP Infiniband
Mezzanine Options
HP Security - TPM
HP 4X QDR IB CX-2 Dual Port Mezz HCA for HP BladeSystem c-Class
NOTE: Provides DDR/QDR InfiniBand connectivity when used in conjunction
with HP BLc 4X QDR IB Switch for HP BladeSystem c-Class (PN 489184-B21).
NOTE: For more support details, please visit the following web-page:
http://www.hp.com/products1/serverconnectivity/adapters/infiniband/
specifications.html
HP BL8x0c i4 Trusted Platform Module Kit
NOTE: The TPM must be installed by the factory.
592519-B21
AM392A
Step 4: Choose Additional Options for Field Upgrades
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional
options, including server blade enclosures interconnect, mezzanine options and power subsystem options; please see the
Core Options and Additional sections below; or the following:
HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
and HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 23
QuickSpecs
HP Integrity BL860c i4 Server Blade
Core Options
HP Ethernet Mezzanine HP NC364m Quad Port 1GbE BL-c Adapter
Options
NOTE: Provides four additional Gigabit Ethernet ports per each I/O expansion
slot.
HP NC360m Dual Port 1GbE BL-c Adapter
NOTE: Provides two additional Gigabit Ethernet ports per each I/O expansion
slot.
HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
NOTE: Provides Flex-10 connectivity when used in conjunction with the HP
Virtual Connect Flex-10 10Gb Ethernet Module for the c-Class BladeSystem
Option (P/N 455880-B21).
HP NC532m Dual Port Flex-10 10GbE BL-c Adapter
NOTE: Provides Flex-10 connectivity when used in conjunction with the Provides
Flex-10 connectivity when used in conjunction with the HP Virtual Connect Flex10 10Gb Ethernet Module for the c-Class BladeSystem Option (P/N 455880B21).
HP FlexFabric
HP BLc NC551m Dual Port FlexFabric 10Gb Converged Network Adapter
Mezzanine Options
HP BLc NC553m Dual Port FlexFabric 10Gb Converged Network Adapter
NOTE: Provides Ethernet and FCoE connectivity when used in conjunction with
HP Virtual Connect FlexFabric 10Gb/24-Port Module (PN 571956-B21).
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
HP NC551m:
http://h18004.www1.hp.com/products/quickspecs/13649_div/13649_div.html
HP NC553m:
http://h18004.www1.hp.com/products/quickspecs/13737_div/13737_div.html
HP Virtual Connect FlexFabric Module
http://h18004.www1.hp.com/products/quickspecs/13652_div/13652_div.html
HP Fiber Channel
Mezzanine Options
HP Processors
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
Octo-Core Processors
HP BL8x0c i4 Itanium 9540 (2.13GHz/8-core/24MB/170W) Processor Kit
HP BL8x0c i4 Itanium 9560 (2.53GHz/8-core/32MB/170W) Processor Kit
Quad-Core Processor
HP BL8x0c i4 Itanium 9520 (1.73GHz/4-core/20MB/130W) Processor Kit
HP BL8x0c i4 Itanium 9550 (2.4GHz/4-core/32MB/170W) Processor Kit
NOTE: HP Integrity BL860c i4 processor upgrade kits contain one processor.
Processors in a given server blade must be identical. No mixing of processor
models is allowed.
NOTE: HP Integrity BL860c i4 only supports 1 or 2 processor configurations.
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
447883-B21
445978-B21
610609-B21
467799-B21
580151-B21
613431-B21
456972-B21
451871-B21
AM383A
AM382A
AM385A
AM384A
Page 24
QuickSpecs
HP Integrity BL860c i4 Server Blade
Core Options
HP Memory
HP BL8x0c i4 8GB (2x4GB) PCL3-10600 Registered CAS 9 Memory Kit
HP BL8x0c i4 16GB (2x8GB) PCL3-10600 Registered CAS 9 Memory Kit
HP BL8x0c i4 32GB (2x16GB) PCL3-10600 Registered CAS 9 Memory Kit
NOTE: Memory kits consist of pairs of DIMMs.
NOTE: DIMMS must be installed in pairs.
NOTE: DIMMs must be installed in decreasing capacity with the largest DIMMs
installed in the lowest numbered slots.
HP Hard Drives
NOTE: Hard drives have either a one year or three year warranty; refer to specific
hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
NOTE: Though the disks are 6Gb, implementation of the embedded
HP p410c SAS RAID controller limits performance of disks to 3Gb
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information related to HDDs:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide)
6G SAS Hot Plug Enterprise Performance Solid State Drives
HP 200GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid
State Drive
HP 400GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid
State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information related to HDDs:
http://h18000.www1.hp.com/products/quickspecs/14038_div/14038_div.html
(Worldwide)
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
AM386A
AM387A
AM388A
619291-B21
581286-B21
581284-B21
627117-B21
507127-B21
512547-B21
632492-B21
632494-B21
Page 25
QuickSpecs
HP Integrity BL860c i4 Server Blade
Additional Options
HP Smart Array
Controller
HP Smart Array P711m 6G SAS Controller
NOTE: The P711m will function as a SAS RAID controller when connected to
MDS600 disk subsystem via the HP BLc 6Gb SAS Switch. In the RAID mode, HPUX 11i v3 is supported.
NOTE: The P711m will function as a Pass-Thru when connected to the HP
P2000G3 SAS Storage Array via the HP BLc 6Gb SAS Switch. In the Pass-Thru
mode, HP-UX 11i v3 is supported.
For more details please see QuickSpec:
http://h18004.www1.hp.com/products/quickspecs/14035_div/14035_div.html
513778-B21
HP Infiniband
Mezzanine Options
HP 4X QDR InfiniBand ConnectX-2 Dual Port Mezzanine HCA for c-Class
BladeSystem
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12586_div/12586_div.html
592519-B21
HP Ethernet
Interconnects
HP BLc Virtual Connect FlexFabric 10Gb/24-port Module Option
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13652_div/13652_div.html
571956-B21
HP Storage Blades
HP Storage SB40c Storage Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional
options at:
http://h18000.www1.hp.com/products/quickspecs/12587_div/12587_div.html
(Worldwide)
HP Storage D2200sb Storage Blade
NOTE: Please see QuickSpecs for Technical Specifications and additional options
at:
http://h18004.www1.hp.com/products/quickspecs/13714_div/13714_div.html
HP LTO-5 SB3000c Tape Blade
HP LTO-4 SB1760c Tape Blade
NOTE: Please see the QuickSpecs for Technical Specifications and options at:
http://h18004.www1.hp.com/products/quickspecs/12729_div/12729_div.html
411243-B21
HP Tape Blades
HP USB Options
HP Integrity USB External DVD-RW drive
NOTE: The HP Integrity USB External DVD-RW drive solution includes the External
DVD drive (AT120A) with 9 inch USB cable, power adaptor, power cable and Yconnector and 7-foot USB extension cable.
NOTE: The USB Y-connector goes between the extension cable and the 9-inch USB
cable fixed with DVD drive.
NOTE: The Y-connector should NOT be placed between the server blade and the 7foot Extension cable.
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
AP880A
BS580A
AQ697A
AT120A
Page 26
QuickSpecs
HP Integrity BL860c i4 Server Blade
Additional Options
HP Care Pack Services HP offers a range of support services and additional services. For a complete listing
of services, see: HP.com external site:
http://www.hp.com/services/bladesystemservices
HP Critical Service
Hardware Only, Critical Service, 7-Day x 24 Hour, 1 Year
Hardware Only, Critical Service, 7-Day x 24 Hour, 3 Years
Installation Services
Integrity BL860c i4 Server Blade Hardware Installation
NOTE: For more information: http://www.hp.com/services/bladesystemservices
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
HA112A1
HA112A3
HA113A1
Page 27
QuickSpecs
HP Integrity BL860c i4 Server Blade
Memory
DIMM installation guidelines:
1. All DIMMs must be DDR3 registered memory modules (R-DIMMs)
2. Both DIMM slots in a memory bank must be populated. A memory bank in this case is identical with a memory pair. A
PCU will drive banks A through F.
3. Banks must be populated in sequential Alphabetic order, starting with bank A for CPU0, followed by bank A for CPU1,
etc.
4. Both DIMMs in a memory bank must be identical.
5. DIMMs must be installed in decreasing capacity with the largest DIMMs installed in the smallest numbered DIMM slot.
HP Integrity BL860c i4 Server Blade
Standard Memory
8 GB Registered PCL3-10600 DDR3 1333MHz ECC DIMMs (2 x 4 GB)
Memory Bus Bandwidth: 6.4GT/s
Standard Memory Plus Optional Memory
Up to 384GB of DDR3 registered memory is available.
Following are memory options available from HP:
HP Memory
HP BL8x0c i4 8GB (2x4GB) PCL3-10600 Registered CAS 9 Memory Kit
HP BL8x0c i4 16GB (2x8GB) PCL3-10600 Registered CAS 9 Memory Kit
HP BL8x0c i4 32GB (2x16GB) PCL3-10600 Registered CAS 9 Memory Kit
The following memory options are also supported as field upgrades (no factory
installation)
HP BL8x0c i2 8GB (2x4GB) PC3-10600 Registered CAS 9 Memory Kit
HP BL8x0c i2 16GB (2x8GB) PC3-10600 Registered CAS 9 Memory Kit
NOTE: Must be installed in pairs.
NOTE: DIMMs must be installed in decreasing capacity with the largest DIMMs
in the smallest numbered slots.
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
AM386A
AM387A
AM388A
AM327A
AM328A
Page 28
QuickSpecs
HP Integrity BL860c i4 Server Blade
Storage
1
2 x SFF SAS Hot Plug Hard Drives
Hard Drives
SAS Hot Plug SFF Enterprise (ENT) Drives
NOTE: Hard drives have either a one year or three year warranty; refer to specific hard drive QuickSpecs for details.
Quantity
Position
Supported
Supported Controller
900GB 6G 10K SFF
2
1-2
HP Smart Array P410i Controller
600GB 6G 10K SFF
450GB 6G 10K SFF
300GB 6G 10K SFF
300GB 6G 15K SFF
146GB 6G 15K SFF
6G SAS Hot Plug Enterprise Performance Solid State Drives
NOTE: Hard drives have either a one year or three year warranty; refer to specific hard drive QuickSpecs for details.
Quantity
Position
Supported
Supported Controller
200GB 6G SLC SFF
2
1-2
HP Smart Array P410i Controller
400GB 6G SLC SFF
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 29
QuickSpecs
HP Integrity BL860c i4 Server Blade
Power Specifications
NOTE: The HP Power Advisor is a tool provided by Hewlett-Packard to assist in the estimation of power consumption and proper
selection of components including power supplies at a system, rack, and multi-rack level. A variety of additional features are also
provided including a condensed bill of materials, a cost of owner ship calculator, and a power report. For additional information
please visit: HP Power Advisor: http://h18004.www1.hp.com/products/solutions/power/index.html
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 30
QuickSpecs
HP Integrity BL860c i4 Server Blade
Technical Specifications
System Unit
Dimensions
Shipping Dimensions
Weight
Temperature Range*
Height
Depth
Width
Height
Depth
Width
Maximum
Operating
Non-Operating
Storage
Maximum Wet Bulb
Temperature
14.42 in (36.63 cm)
19.1 in (48.51 cm)
2.025 in (5.14 cm)
21.50 in (54.61 cm)
26.0 in (66.04 cm)
10.00 in (25.4 cm)
25.0 lbs (11.3 kg)
10° to 35° C (50° to 95° F)
-40° to 60° C (-40° to 140° F)
-20° to 60° C (-4° to 140° F)
30° C (86° F)
Relative Humidity**
Operating
15% to 80% RH non-condensing
Shipping
5% to 95% RH non-condensing
Storage
5% to 95% RH non-condensing
* All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F
per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit
is 3,048m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or 30.3
KPa/4.4 psia.
** Storage maximum humidity of 90% is based on a maximum temperature of 45°C (113°F).
Altitude maximum for storage corresponds to a pressure minimum of 70 KPa.
Embedded SAS RAID
HP Smart Array p410i
Controller
Disk Drive and
3Gb SAS (Serial Attached SCSI)
Enclosure Interface
SAS Connectors
2 internal (SFF8484) x4 wide part connectors
Cache Memory Speed DDR2-800 memory provides up to 4.2 GB/s maximum bandwidth
Server Interface
X1 5.0Gbps PCIe provides 1GB/s maximum bandwidth.
SAS Speed
Two x1 3G SAS provide 600MB/s maximum bandwidth.
Cache Memory
Embedded SAS read only 512MB.
Logical Drives
Up to 2 logical volumes
Supported
Maximum Logical DriveUp to 64 logical
Capacity
Host Memory
64-bit, supporting greater than 4GB server memory space
Addressing
RAID Support
RAID 0 (Striping), RAID 1 (mirroring), and1+0 (Mirrored and Striped)
(not supported with BL8x0c i4 blades)
Upgradeable Firmware Upgradeable Firmware with Recovery ROM features
Online Drive Flash requires 256MB, 512MB, or 1GB cache module
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 31
QuickSpecs
HP Integrity BL860c i4 Server Blade
Technical Specifications
Embedded NC553i 10
Gb 2-port FlexFabric
NICs with Flex-10
support
Network Interface
Compatibility
Data Transfer Method
Network Transfer Rate
(Theoretical Maximum
Values)
1000Base-Sx
IEEE 802.ip QoS 802.3x flow control, and 802.3ap 10GBase-KR
PCI Express, four lanes (x4)
1Dual 10Gb parts offer up to 40Gb/s bidirectional theoretical throughput
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
Regulatory ComplianceRegulatory Model
Number
Electromagnetic
Interference
Safety
More detailed
regulatory documents
and certifications
RSVLA-BC11
Complies with FCC Rules and Regulations, Part 15, as a Class A digital
device. Manufacturer's Declaration to EN55022 Class A, VCCI
Registered, Class A, KC (Korea Certification), BMSI Taiwan, CSA
Certified, compliant with IEC 60950, UL 60950, EN 60950 and EN41003
UL Listed, CSA Certified, TUV GS Mark compliant with EN 60950 and
EN 41003
http://docs.hp.com/en/hw.html
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon
Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 14449 Worldwide QuickSpecs — Version 3 — 12/10/2013
Page 32
Download PDF
Similar pages