4000 · 5000 · 5500 · 6000 · 7000 lbs

GC-VX
VERACITOR® CUSHION TIRE TRUCKS
4,000 · 5,000 · 5,500 · 6,000 · 7,000 lbs
Yale Veracitor ® GC-VX Series
This series of trucks is available in several configurations,
designed to meet and exceed your material handling application
requirements. The Veracitor® forklift can be configured for
maximum performance for medium to heavy duty applications
with state-of-the-art features and superior power. Applications
with standard and medium duty requirements can optimize the
product for lowest cost of operation. Standard duty applications
can enjoy excellent performance with minimal acquisition cost.
Yale Veracitor ® VX Industrial Engines feature a rigid
cast iron block and main bearing caps. The nodular iron
crankshaft is supported with five main bearings. The coil
over plug ignition design eliminates spark plug wires.
The Kubota LPG engine features a cast iron cylinder head and
deep skirt engine block for strength and resistance to shock. The
Kubota also features a long cylinder stroke for improved torque.
The PSI engine features hydraulic adjusters that eliminate
the need for manual valve clearance adjustments. The PSI
also features twin engine balance shafts to reduce engine
vibration resulting in smoother and quieter performance.
All engines feature hardened exhaust valve seats with
stellite coated valves for superior durability.
Fuel System
All engines are EPA emissions compliant and feature closed
loop emissions regulation systems that continually monitor
exhaust and adjust fuel/air mix as necessary. Yale Veracitor®
VX engines use a vaporizer/regulator to convert the fuel
from a liquid to a gas, and a mixer carburetor. The engines
feature three individual performance modes to optimize fuel
economy in applications with different productivity levels.
Transmission
There are two transmission selections available with multiple engine
configurations that will handle a wide variety of material handling
applications. Both transmissions feature electronic inching (requires
no adjustment), electronic shift control, neutral start switch, and
anti-restart protection. A single pedal controls both inching and
braking. Optional dual inch/brake pedals are available for operators
who prefer this design. A 100 mesh suction and a 10 micron return
line filtration protect the transmission from abrasive contaminants.
The Techtronix 100 features auto deceleration through the controlled
application of clutch packs, and also reduces tire spin by precisely
regulating engine speed during controlled power reversals.
Cooling System employs a 17” blade pusher-type fan. A
permanently lubricated water pump and a high capacity, crossflow radiator ensure rapid heat dissipation. The sealed cooling
system operates at a pressure of 15 psi and includes a coolant
LPG/Dual Fuel Engine Specifications
Engine
PSI 2.4L
Cylinders4
Camshaft
Overhead Valve
Displacement
143 cu.in./2.4 liter
Torque
121 lb.ft. @ 2000 RPM
Horsepower
59 hp
Air Filtration
Two Stage, Dry Type
Emission Control Closed loop
recovery tank for visual inspection of coolant level. Transmission
oil cooler is integrated into the radiator and is located in the side
tank. The optional combi-cooler radiator features an externally
mounted transmission oil cooler for increased heat transfer
capability. All radiators are soft mounted for excellent durability.
Drive Axle
The drive axles are designed to withstand heavy duty loads and
absorb shock loads. The wheel hubs rotate on large tapered roller
bearings. The drive shaft transmits torsion to the drive axle from
the engine and transmission. Transmission torque occurs through
an industrial hypoid ring gear and pinion differential assembly.
The drive axle is a self contained assembly that is isolated from the
transmission by a heavy duty rubber isolator. The axle shafts utilize
a “rolled fillet” root spline design for increased resistance to torsion
stress. A magnetic sump plug is used to collect any metal particles
that are circulating in the axle oil, preventing component wear.
Brakes are duo-servo hydraulic, self-energizing, and automatic
adjusting drum brake assemblies. Asbestos-free brake linings
are bonded to steel shoes and act against a cast iron drum.
Single circuit master cylinder has sealed fluid reservoir and
features a fluid level sensor which activates an indicator light
located on the instrument panel. Independent, hand adjustable
parking brake with push-button release has audible alarm.
Hydraulic Power Steering (hydrostatic steering) provides
responsive control and eliminates mechanical linkages for
reduced surface shock and simplified maintenance. The
steering wheel is 12 inches in diameter with a textured surface
grip and spinner knob, and requires only four turns lockto-lock. The center mounted steer cylinder is located
within the confines of the steer axle for protection.
Steer Axle is constructed of cast steel and is rubber
shock mounted to the frame for reduced wear and
vibration. The Continuous Stability System (CSS™)
enhances lateral truck stability through reduced steer
axle articulation, while simultaneously allowing
uncompromised traveling across various surfaces.
Chassis designed by Finite Element Analysis
(FEA) methods contains a rugged, unitized
frame structure with a low step for
simple entrance to the operator’s
compartment. Ergonomically
designed overhead guard is
bar type for excellent visibility
and reduced noise.
continued on back
LPG Engine Specifications
Engine
Kubota 2.5L
Cylinders4
Camshaft
Overhead Valve
Displacement
152 cu.in./2.5 liter
Torque
131 lb.ft. @ 1000 RPM
Horsepower
59 hp
Air Filtration Two Stage, Dry Type
Emission Control Closed loop
Truck shown with optional equipment
GENERAL
1
2
3
4
5
6
7
8
9
10
11
DIMENSIONS
12
13
14
15
16
17
18
19
20
PERFORMANCE
21
22
23
24
25
26
27
28
POWERTRAIN
TIRES & WHEELS
WT.
29
31
32
33
34
35
37
38
39
40
41
42
43
44
45
46
47
49
50
51
Manufacturer Name
Yale
Model
GC040VX
GC050VX
Engine
PSI 2.4L
Kubota 2.5L
PSI 2.4L
Kubota 2.5L
Rated Capacity
lb (kg)
4000 (1814)
5000 (2268)
Load Center, Distance
in (mm)
24.0 (610)
Power Type - LPG, Diesel, Dual Fuel
LPG
Dual Fuel
LPG
LPG
Dual Fuel
LPG
Operator Type
Sit-Down Rider
Step Height
in (mm)
13.8 (350)
Tire Type - Cushion, Solid, Pneumatic
Cushion
Wheels, Number - Front/ Rear
2x/2
Lift Height, Top of Fork (TOF)
in (mm)
129 (3292)
Lift Heights, Std. Limited Free Lift (LFL) w/o LBR (TOF)
in (mm)
5 (140)
Lift Heights, Opt. Full Free Lift (FFL) w/o LBR (TOF)
in (mm)
62 (1575)
Standard Carriage Width
in (mm)
38.5 (980)
Forks, Thickness x Width x Length
in
1.6 X 3.9 X 42
Forks, Thickness x Width x Length
(mm)
(40 X 100 X 1067)
Fork Spread, Outside Dimensions
in (mm)
38.3 (974)
Mast Tilt Angles, Forward/Backward
degrees
5F/5B
Length To Face of Forks
in (mm)
88.1 (2238)
90.2 (2291)
Overall Width, Standard Tread
in (mm)
42.0 (1067)
Overall Width, Wide Tread
in (mm)
48.9 (1242)
Height, Standard Mast - Lowered
in (mm)
85 (2135)
Height, Standard Mast - Extended with LBR
in (mm)
178 (4515)
Height, Standard Mast - Extended without LBR
in (mm)
151 (3840)
Height, Standard Overhead Guard
in (mm)
84 (2128)
Height, Optional Overhead Guard
in (mm)
82 (2061)
Turning Radius, Minimum Outside (OTR)
in (mm)
76.8 (1950)
78.7 (2000)
Length, Center of Wheel to Face of Forks
in (mm)
15.4 (390)
Aisle Width, Right Angle Stack (Add Length of Load)
in (mm)
92.1 (2340)
94.1 (2390)
Equal Aisle, 90-Degree Intersecting Aisle
in (mm)
73.8 (1875)
74.7 (1897)
Travel Speed, Powershift Transmission RL/NL
mph (km/h) 10.9/11.3 (17.6/18.2) 11.1/11.2 (17.8/18.0) 10.9/11.3 (17.6/18.2) 11.1/11.2 (17.8/18.0)
Lift Speed, Standard 2-Stage LFL RL/NL
ft/min (m/s)
120/124 (.61/.63)
122 /126 (.62/.64)
120/124 (.61/.63)
122 /126 (.62/.64)
Lift Speed, Optional 2-Stage FFL RL/NL
ft/min (m/s)
106/110 (.54/.56)
106/112 (.54/.57)
106/110 (.54/.56)
106/112 (.54/.57)
Lift Speed, Optional 3-Stage FFL RL/NL
ft/min (m/s)
112/116 (.57/.59)
114/120 (.58/.61)
112/116 (.57/.59)
114/120 (.58/.61)
Lift Speed, Optional 4-Stage FFL RL/NL
ft/min (m/s)
120/124 (.61/.63)
122/126 (.62/.64)
120/124 (.61/.63)
122/126 (.62/.64)
Lowering Speed, Standard 2-Stage LFL RL/NL
ft/min (m/s)
114/98 (.58 /.50)
Lowering Speed, Optional 2-Stage FFL RL/NL
ft/min (m/s)
98/83 (.50 /.42)
Lowering Speed, Optional 3-Stage FFL RL/NL
ft/min (m/s)
106/93 (.54 /.47)
Lowering Speed, Optional 4-Stage FFL RL/NL
ft/min (m/s)
108/73 (.55 /.37)
Maximum drawbar pull RL/NL
lb (kg) 5322/1764 (2414/800) 4680/1764 (2123/800) 5282/1676 (2396/760) 4643/1676 (2106/760)
Drawbar Pull, Std. Transmission @ 1 mph RL/NL
4453/1764 (2020/800) 4050/1764 (1837/800) 4418/1676 (2004/760) 4012/1676 (1820/760)
Gradeability, Std. Transmission @ 1 mph RL/NL
%
39/24
35/24
33/21
30/21
Weight, Standard Truck (2-Stg. LFL) NL
lb (kg)
7803 (3539)
8587 (3895)
Weight, Standard Truck (2-Stg. LFL) RL
lb (kg)
11803 (5554)
13587 (6163)
Axle Loading, Static Front/Rear NL
lb (kg)
3570/4233 (1619/1920)
3402/5185 (1543/2352)
Axle Loading, Static Front/Rear RL
lb (kg)
10366/1437 (4702/652)
11897/1690 (5396/767)
Tire Size, Front
21 X 7 x 15
Tire Size, Rear
16 x 5 x 10.5
Wheelbase
in (mm)
56.3 (1430)
Ground Clearance, Lowest Point NL
in (mm)
3.6 (91)
(w/RL subtract 6mm)
Ground Clearance, Center of Wheelbase NL
in (mm)
4.9 (125)
Service Brake - Method of Control/Operation
Foot/Hydraulic
Parking Brake - Method of Control/Operation
Hand/Mechanical
Battery Type
Maintenance Free
Volts/Cold Cranking Amps
v/cca
12/475
Engine, Manufacturer/Model
PSI 2.4L
Kubota 2.5L
PSI 2.4L
Kubota 2.5L
Permanent Output
hp (kw)
59 (44)
59 (44)
59 (44)
59 (44)
Torque @ Rated RPM
ft Lbs (kg/m) 121 (16.7) @ 2000 RPM 131 (18) @ 1000 RPM 121 (16.7) @ 2000 RPM 131 (18) @ 1000 RPM
Number of Cylinders/Displacement
No/cc (ci)
4/2351 (143)
4/2491 (152)
4/2351 (143)
4/2491 (152)
Transmission Type, Standard
Electronic Powershift
Standard Speeds, Forward - Reverse
1-1
Hydraulic Tank Capacity (Drain and Refill)
gal (liter)
9.5 (36.1)
Fuel Tank Capacity (Dual Fuel - Gasoline )
gal (liter)
NA
10.7 (40.5)
NA
NA
10.7 (40.5)
NA
Auxiliary Hydraulic Pressure Relief for Attachments
PSI (Mpa)
2250 (15.4)
GENERAL
1
2
33
34
35
Manufacturer Name
Model
Engine
Rated Capacity
Load Center, Distance
Power Type - LPG, Diesel, Dual Fuel
Operator Type
Step Height
Tire Type - Cushion, Solid, Pneumatic
Wheels, Number - Front/ Rear
Lift Height, Top of Fork (TOF)
Lift Heights, Std. Limited Free Lift (LFL) w/o LBR (TOF)
Lift Heights, Optional Full Free Lift (FFL) w/o LBR (TOF)
Standard Carriage Width
Forks, Thickness x Width x Length
Forks, Thickness x Width x Length
Fork Spread, Outside Dimensions
Mast Tilt Angles, Forward/Backward
Length To Face of Forks
Overall Width, Standard Tread
Overall Width, Wide Tread
Height, Standard Mast - Lowered
Height, Standard Mast - Extended with LBR
Height, Standard Mast - Extended without LBR
Height, Standard Overhead Guard
Height, Optional Overhead Guard
Turning Radius, Minimum Outside (OTR)
Length, Center of Wheel to Face of Forks
Aisle Width, Right Angle Stack (Add Length of Load)
Equal Aisle, 90-Degree Intersecting Aisle
Travel Speed, Powershift Transmission RL/NL
Lift Speed, Standard 2-Stage LFL RL/NL
Lift Speed, Optional 2-Stage FFL RL/NL
Lift Speed, Optional 3-Stage FFL RL/NL
Lift Speed, Optional 4-Stage FFL RL/NL
Lowering Speed, Standard 2-Stage LFL RL/NL
Lowering Speed, Optional 2-Stage FFL RL/NL
Lowering Speed, Optional 3-Stage FFL RL/NL
Lowering Speed, Optional 4-Stage FFL RL/NL
Maximum drawbar pull RL/NL
Drawbar Pull, Standard Transmission @ 1 mph RL/NL
Gradeability, Standard Transmission @ 1 mph RL/NL
Weight, Standard Truck (2-Stg. LFL) NL
Weight, Standard Truck (2-Stg. LFL) RL
Axle Loading, Static Front/Rear NL
Axle Loading, Static Front/Rear RL
Tire Size, Front
Tire Size, Rear
Wheelbase
37
Ground Clearance, Lowest Point NL (w/RL subtract 6mm)
in (mm)
38
39
40
41
42
43
44
45
46
47
Ground Clearance, Center of Wheelbase NL
Service Brake - Method of Control/Operation
Parking Brake - Method of Control/Operation
Battery Type
Volts/Cold Cranking Amps
Engine, Manufacturer/Model
Permanent Output
Torque @ Rated RPM
Number of Cylinders/Displacement
Transmission Type, Standard
Standard Speeds, Forward - Reverse
Hydraulic Tank Capacity (Drain and Refill)
Fuel Tank Capacity (Dual Fuel - Gasoline )
Auxiliary Hydraulic Pressure Relief for Attachments
in (mm)
3
4
5
6
7
8
9
10
11
DIMENSIONS
12
13
14
15
16
17
18
19
20
PERFORMANCE
21
22
23
24
25
26
27
28
POWERTRAIN
TIRES & WHEELS
WT.
29
31
32
49
50
51
Yale
GC055SVX
PSI 2.4L
lb (kg)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in
(mm)
in (mm)
degrees
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
mph (km/h)
ft/min (m/s)
ft/min (m/s)
ft/min (m/s)
ft/min (m/s)
ft/min (m/s)
ft/min (m/s)
ft/min (m/s)
ft/min (m/s)
lb (kg)
%
lb (kg)
lb (kg)
lb (kg)
lb (kg)
in (mm)
v/cca
hp (kw)
ft Lbs (kg/m)
No/cc (ci)
gal (liter)
gal (liter)
PSI (Mpa)
Kubota 2.5L
5500 (2495)
24.0 (610)
LPG
Dual Fuel
LPG
Sit-Down Rider
13.8 (350)
Cushion
2x/2
129 (3292)
5 (140)
62 (1575)
38.5 (980)
1.6 X 3.9 X 42
(40 x 100 x 1067)
38.3 (974)
5F/5B
87.7 (2228)
43.6 (1108)
48.9 (1242)
85 (2135)
178 (4515)
151 (3840)
84 (2128)
82 (2061)
76.3 (1937)
15.4 (390)
91.6 (2327)
74.2 (1885)
10.9/11.3 (17.6/18.2)
11.1/11.2 (17.8/18.0)
120/124 (.61/.63)
124 /126 (.63/.64)
106/110 (.54/.56)
108/112 (.55/.57)
112/116 (.57/.59)
116/120 (.59/.61)
120/124 (.61/.63)
122/126 (.62/.64)
114/98 (.58 /.50)
98/83 (.50 /.42)
106/93 (.54 /.47)
108/73 (.55 /.37)
5260/1676 (2386/760)
4623/1676 (2097/760)
4398/1676 (1995/760)
3993/1676 (1811/760)
31/20
28/20
9113 (4134)
14613 (6628)
3454/5659 (1567/2567)
12799/1814 (5806/823)
21 X 8 x 15
16 x 6 x 10.5
56.3 (1430)
3.6 (91)
4.9 (125)
Foot/Hydraulic
Hand/Mechanical
Maintenance Free
12/475
PSI 2.4L
Kubota 2.5L
59 (44)
59 (44)
121 (16.7) @ 2000 RPM
131 (18) @ 1000 RPM
4/2351 (143)
4/2491 (152)
Electronic Powershift
1-1
9.5 (36.1)
NA
10.7 (40.5)
NA
2250 (15.4)
GENERAL
DIMENSIONS
PERFORMANCE
WT.
TIRES & WHEELS
POWERTRAIN
1 Manufacturer Name
Yale
2 Model
GC060VX
GC070VX
Engine
PSI 2.4L
Kubota 2.5L
PSI 2.4L
Kubota 2.5L
3 Rated Capacity
lb (kg)
6000 (2722)
7000 (3175)
4 Load Center, Distance
in (mm)
24.0 (610)
5 Power Type - LPG, Diesel, Dual Fuel
LPG
Dual Fuel
LPG
LPG
Dual Fuel
LPG
6 Operator Type
Sit-Down Rider
7 Step Height
in (mm)
13.8 (350)
8 Tire Type - Cushion, Solid, Pneumatic
Cushion
9 Wheels, Number - Front/ Rear
2x/2
10 Lift Height, Top of Fork (TOF)
in (mm)
126 (3209)
11 Lift Heights, Std. Limited Free Lift (LFL) w/o LBR (TOF)
in (mm)
5 (150)
Lift Heights, Opt. Full Free Lift (FFL) w/o LBR (TOF)
in (mm)
58 (1490)
12 Standard Carriage Width
in (mm)
38.5 (980)
13 Forks, Thickness x Width x Length
in
2.0 X 4.9 X 42
Forks, Thickness x Width x Length
(mm)
(50 X 125 X 1067)
14 Fork Spread, Outside Dimensions
in (mm)
38.3 (974)
15 Mast Tilt Angles, Forward/Backward
degrees
5F/5B
16 Length To Face of Forks
in (mm)
93.4 (2373)
95.6 (2429)
17 Overall Width, Standard Tread
in (mm)
43.6 (1108)
45.6 (1158)
Overall Width, Wide Tread
in (mm)
48.9 (1242)
18 Height, Standard Mast - Lowered
in (mm)
87 (2185)
19 Height, Standard Mast - Extended with LBR
in (mm)
175 (4435)
Height, Standard Mast - Extended without LBR
in (mm)
152 (3855)
20 Height, Standard Overhead Guard
in (mm)
84 (2128)
Height, Optional Overhead Guard
in (mm)
82 (2061)
21 Turning Radius, Minimum Outside (OTR)
in (mm)
81.3 (2066)
22 Length, Center of Wheel to Face of Forks
in (mm)
15.8 (402)
15.8 (402)
23 Aisle Width, Right Angle Stack (Add Length of Load)
in (mm)
97.2 (2468)
99.3 (2521)
24 Equal Aisle, 90-Degree Intersecting Aisle
in (mm)
76.5 (1943)
78.2 (1986)
25 Travel Speed, Powershift Transmission RL/NL
mph (km/h) 10.6/11.2 (17.0/18.0)
11.1/11.2 (17.8/18.0)
10.6/11.2 (17.0/18.0)
11.1/11.2 (17.8/18.0)
26 Lift Speed, Standard 2-Stage LFL RL/NL
ft/min (m/s)
104 /108 (.53/.55)
108 /110 (.55/.56)
104 /108 (.53/.55)
110 /110 (.56/.56)
Lift Speed, Optional 2-Stage FFL RL/NL
ft/min (m/s)
102/106 (.52/.54)
104/106 (.53/.54)
102/106 (.52/.54)
104/106 (.53/.54)
Lift Speed, Optional 3-Stage FFL RL/NL
ft/min (m/s)
100 /104 (.51/.53)
100/104 (.51/.53)
100 /104 (.51/.53)
102/104 (.52/.53)
Lift Speed, Optional 4-Stage FFL RL/NL
ft/min (m/s)
120/124 (.61/.63)
122/126 (.62/.64)
N/A
27 Lowering Speed, Standard 2-Stage LFL RL/NL
ft/min (m/s)
104/93 (.53 /.47)
104/93 (.53 /.47)
Lowering Speed, Optional 2-Stage FFL RL/NL
ft/min (m/s)
98/83 (.50 /.42)
98/83 (.50 /.42)
Lowering Speed, Optional 3-Stage FFL RL/NL
ft/min (m/s)
114/95 (.58 /.48)
114/95 (.58 /.48)
Lowering Speed, Optional 4-Stage FFL RL/NL
ft/min (m/s)
108/73 (.55 /.37)
N/A
28 Maximum drawbar pull RL/NL
lb (kg) 5234/1821 (2374/826) 4597/1821 (2085/826) 5172/1709 (2346/775) 4559/1709 (2068/775)
Drawbar Pull, Std. Transmission @ 1 mph RL/NL
4372/1821 (1983/826) 3968/1821 (1800/826) 4321/1709 (1960/775) 3931/1709 (1783/775)
29 Gradeability, Std. Transmission @ 1 mph RL/NL
%
28/19
25/19
25/17
23/17
31 Weight, Standard Truck (2-Stg. LFL) NL
lb (kg)
9768 (4431)
10535 (4779)
Weight, Standard Truck (2-Stg. LFL) RL
lb (kg)
15767 (7152)
17535 (7954)
32 Axle Loading, Static Front/Rear NL
lb (kg)
3474/6294 (1576/2855)
3269/7266 (1483/3296)
Axle Loading, Static Front/Rear RL
lb (kg)
13718/2049 (6222/929)
15221/2314 (6904/1050)
33 Tire Size, Front
21 X 8 x 15
21 X 9 x 15
34 Tire Size, Rear
16 x 6 x 10.5
35 Wheelbase
in (mm)
56.3 (1430)
Ground
Clearance,
Lowest
Point
NL
37 (w/RL subtract 6mm)
in (mm)
3.6 (91)
38 Ground Clearance, Center of Wheelbase NL
in (mm)
4.9 (125)
39 Service Brake - Method of Control/Operation
Foot/Hydraulic
40 Parking Brake - Method of Control/Operation
Hand/Mechanical
41 Battery Type
Maintenance Free
42 Volts/Cold Cranking Amps
v / cca
12/475
43 Engine, Manufacturer/Model
PSI 2.4L
Kubota 2.5L
PSI 2.4L
Kubota 2.5L
44 Permanent Output
hp (kw)
59 (44)
59 (44)
59 (44)
59 (44)
45 Torque @ Rated RPM
ft Lbs (kg/m) 121 (16.7) @ 2000 RPM 131 (18) @ 1000 RPM 121 (16.7) @ 2000 RPM 131 (18) @ 1000 RPM
46 Number of Cylinders/Displacement
No / cc (ci)
4/2351 (143)
4/2491 (152)
4/2351 (143)
4/2491 (152)
47 Transmission Type, Standard
Electronic Powershift
Standard Speeds, Forward - Reverse
1-1
49 Hydraulic Tank Capacity (Drain and Refill)
gal (liter)
9.5 (36.1)
50 Fuel Tank Capacity (Dual Fuel - Gasoline )
gal (liter)
NA
10.7 (40.5)
NA
NA
10.7 (40.5)
NA
51 Auxiliary Hydraulic Pressure Relief for Attachments
PSI (Mpa)
2250 (15.4)
GC040-050VX, GC055SVX MAST DIMENSIONS
Maximum Fork
Height (TOF) †
Overall Lowered Height
in (mm)
in (mm)
Overall Extended Height
with LBR
without LBR
in (mm)
in (mm)
Free Lift (TOF)
without LBR*
in (mm)
Approximate Total Weight of Standard Equipped Truck w/o Load
GC040VX
GC050VX
GC055SVX
lbs (kg)
lbs (kg)
lbs (kg)
2-STAGE LIMITED FREE LIFT (LFL) Hi-Vis™2 MAST
82 (2092)
129 (3292)
61 (1535)
85 (2135)
131 (3315)
178 (4515)
104 (2650)
151 (3840)
5 (140)
5 (140)
7596 (3445)
7803 (3539)
8380 (3801)
8587 (3895)
8906 (4040)
9133 (4134)
152 (3860)
62 (1575)
7840 (3556)
8624 (3912)
9150 (4150)
193 (4890)
210 (5340)
216 (5490)
222 (5640)
240 (6090)
54 (1395)
60 (1545)
62 (1595)
66 (1695)
84 (2145)
8085 (3668)
8160 (3702)
8185 (3713)
8234 (3735)
8314 (3771)
8869 (4023)
8944 (4057)
8969 (4069)
9018 (4090)
9098 (4127)
9395 (4262)
9470 (4296)
9495 (4307)
9544 (4329)
9624 (4365)
262 (6641)
298 (7556)
59 (1513)
71 (1817)
8694 (3944)
8889 (4032)
9478 (4299)
9673 (4388)
10004 (4538)
10199 (4626)
2-STAGE FULL FREE LIF­­­T (FFL) Hi-Vis™ MAST
130 (3302)
85 (2135)
179 (4525)
3-STAGE FULL FREE LIFT (FFL) Hi-Vis™2 MAST
171 (4350)
77 (1935)
220 (5575)
189 (4800)
83 (2085)
238 (6025)
194 (4950)
85 (2135)
244 (6175)
200 (5100)
88 (2235)
249 (6325)
218 (5550)
94 (2385)
267 (6775)
4-STAGE FULL FREE LIFT (FFL) Hi-Vis™ MAST**
240 (6095)
84 (2135)
289 (7321)
276 (7013)
96 (2437)
322 (8184)
†
*
**
Lift heights over 171.5” (4356 mm) maximum fork height are considered highlifts and require reduced capacity and restricted back tilt.
On 2-stage FFL and 3-stage FFL mast, subtract 26” (665 mm) if Load Backrest (LBR) is used.
Lift trucks equipped with the 4-stage FFL mast require Class II carriage and forks.
21
36.66
(929)
21
17
36.0
(914)
36.66
(929)
17
36.0
(914)
24
24
5º FWD
5º BACK
5º FWD
5º BACK
19
Non-Susp
Semi
Full
in (mm)
in (mm)
in (mm)
Tall OHG (Std.)
42.0 (1067)
42.5 (1079)
42 (1067)
Short OHG (Opt.)
39.4 (1000)
39.8 (1012)
N/A
see chart
10
19
10
see chart
18
18
20
GC40-70VX
46.4 (1178)
GC55VX
48.5 (1231) 20
11 Opt.
GC40-70VX
11.846.4 (1178)
(300)GC55VX
48.5 (1231)
11 Opt. 11 Std.
25.4
(645)
37
7
11 Std.
22
22
4.9
(125)
4.4
(112)
35
25.4
(645)
37
33.3º
7
16
33.3º
4.9
(125)
35
16
4.4
(112)
11.8
(300)
Capacity
Grade Clearance
GC040VX
50%
GC050VX
45%
GC055SVX
47%
GC060VX
39%
GC070VX
39%
GC060-070VX MAST DIMENSIONS
Maximum Fork
Height (TOF) †
Overall Lowered Height
in (mm)
in (mm)
Overall Extended Height
with LBR
without LBR
in (mm)
in (mm)
Free Lift (TOF)
without LBR*
in (mm)
Approximate Total Weight of Standard Equipped Truck w/o Load
GC060VX
GC070VX
lbs (kg)
lbs (kg)
2-STAGE LIMITED FREE LIFT (LFL) Hi-Vis™2 MAST
126 (3209)
86 (2185)
175 (4435)
152 (3855)
5 (150)
9768 (4431)
10535 (4779)
148 (3755)
156 (3955)
58 (1490)
62 (1590)
9785 (4438)
9822 (4455)
10552 (4787)
10589 (4803)
207 (5245)
212 (5395)
236 (5995)
254 (6445)
59 (1505)
63 (1595)
73 (1855)
79 (2005)
10128 (4594)
10173 (4614)
10308 (4676)
10498 (4762)
10896 (4942)
10941 (4963)
11076 (5024)
11266 (5110)
262 (6641)
298 (7556)
59 (1513)
71 (1817)
10486 (4757)
10681 (4845)
N/A
N/A
2-STAGE FULL FREE LIF­­­T (FFL) Hi-Vis™ MAST
122 (3110)
130 (3310)
85 (2135)
88 (2235)
171 (4335)
179 (4535)
3-STAGE FULL FREE LIFT (FFL) Hi-Vis™2 MAST
181 (4618)
85 (2135)
231 (5845)
187 (4768)
88 (2235)
236 (5995)
211 (5368)
98 (2485)
260 (6595)
229 (5818)
104 (2635)
278 (7045)
4-STAGE FULL FREE LIFT (FFL) Hi-Vis™ MAST**
240 (6095)
84 (2135)
289 (7321)
276 (7013)
96 (2437)
322 (8184)
†
*
**
Lift heights over 164.0” (4166 mm) maximum fork height are considered highlifts and require reduced capacity and restricted back tilt.
On 2-stage FFL and 3-stage mast, subtract 23” (585 mm) if Load Backrest (LBR) is used.
Lift trucks equipped with the 4-stage FFL mast require Class II carriage and forks.
(continued from cover)
Operator’s Compartment features cowl-mounted hydraulic
control levers positioned on the right side of the steering column.
Optional Accutouch electro-hydraulic controls are integrated into
the operator’s right-side armrest allowing superior ergonomic
actuation. Automotive-style pedal arrangement with a large,
single inch/brake pedal is standard. Tilt cylinders are located
beneath the floor for uncluttered space. Rubber floor mat reduces
noise and vibration. Floorplate can be removed without tools
for excellent service access. Low step height and a convenient
hand grip provide easy entry and exit to and from the truck.
Intellix VSM acts as a master truck controller, providing
extensive monitoring and control of truck functions and systems.
CANbus technology reduces wiring complexity and enables
comprehensive communications between truck systems. The
ergonomically positioned dash display transmits continual
feedback to the operator and allows for communication of service
codes. Comprehensive on-board diagnostics enable quick and
easy troubleshooting. The electrical system features sealed
connectors and Hall Effect sensors for superior dependability.
Hydraulic System incorporates a gear type pump, cast iron
body for quiet efficiency. The system is protected from overloads
by a main relief valve for the lift circuit and a secondary relief valve
for tilt and auxiliary functions. Oil is double filtered through a 100
mesh suction line strainer and 10 micron return line filter. Hydraulic
tank is integrated into the frame. For Accutouch electro-hydraulic
controls, an emergency lowering valve is provided to allow the
load to be lowered in the event of power loss. O-ring face seal
fittings are used in all high pressure hydraulic connections.
Masts are available in 2-stage LFL (Hi-VisTM2), 2-stage FFL
(Hi-VisTM), and 3-stage FFL (Hi-VisTM2), and 4-stage FFL (Hi-VisTM)
models. Mast features flush-faced design with geometrically
matched, angled load roller bearings which are canted, yet provide
full-face roller contact. The mast front rail flange angle coupled
with the inverted “J” inner channel and three degree mast rollers
significantly reduce channel and roller wear. “J-hook” mast mounting
system allows for convenient mast installation and removal. A
non-metallic mast pivot bushing with woven reinforcement offers
high load carrying capability with outstanding durability.
Options
Techtronix 100 transmission
– Auto Deceleration System
– Controlled power reversal feature
– Controlled ramp descent
Powertrain protection system
Premium monitoring package
High air intake with precleaner
Accumulator
Keyless start (w/auxiliary key switch)
LED brake and back-up lights
Halogen or LED headlights and rear drive lights
Traction speed limiter
Heavy duty combi-cooler radiator
Swing-out, drop-down EZ-tank Bracket
Accutouch, electro-hydraulic control
Return-to-set tilt
Rear drive handle with horn button
Swivel full-suspension seat
High-visibility non-cinch seat belt with or without interlock
Foot Directional Control pedal
Extension tubes with quick disconnects
10˚ forward/5˚ backward tilt
Operator password
Dual side view mirrors
Audible alarm - reverse actuated 82-102 dB(A) - self-adjusting
Visible alarm amber strobe light - continuous activated
Paper applications kit
Impact monitor
Load weight display
Operator pre-shift checklist
YALE MATERIALS HANDLING CORPORATION
P.O. Box 7367, Greenville, NC 27835-7367
www.yale.com
Yale is a Registered Trademark and
is a Registered Copyright.
©Yale Materials Handling Corporation 2014. All Rights Reserved.
Manufactured in our own ISO 9001 and 14001 Registered Facilities
2227-1D
12/2014
All trucks shown with optional equipment.
Truck performance may be affected by the condition of the vehicle, how it is equipped and the application. Consult your Yale® Industrial
Truck Dealer if any of the information shown is critical to your application. Specifications are subject to change without notice.
This truck meets all applicable mandatory requirements of ANSI B56.1 Safety Standard for Powered Industrial Trucks at the time of
manufacture. Classified by Underwriters’ Laboratories, Inc., as to fire and electric shock hazard only for Type E industrial trucks.
The Yale® products included in this document may be covered by US patent 6,684,148 and other patents pending.
Download PDF
Similar pages