ERTIFIED
C
AS 9100
RF & Microwave cable assemblies
C291
B
Pages
Introduction .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 4
Specify the right cable for your application .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 5
Finder guide cables vs insertion loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B -6 to B -7
Flexible cables
0.8/50 S cable (132390 type) .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 8
1/50 S cable (50VMTX type) .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 8
1/75 S cable (75VMTX type) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 9
2/50 S cable (RG178-KX21A-RG178 non mag).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B -9 to B -10
2/50 D cable (124416 type) .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 1 0
2/75 S cable (296775 type) .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 1 1
2.6/50 S cable (RG174-KX3B-RG316-KX22A).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B -11 to B -12
2.6/50 D cable (RD316) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 13
2.6/75 S cable (RG179).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 15
4.6/75 D cable (HD 0.6/2.8-mini RG59 type)... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 15
5/50 S cable (RG58-KX15).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 1 6
5/50 D cable (RG142-RG223-RG400-KX23).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B -16 and B -18 to B -19
6/75 S cable (RG59-KX6A).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 21
6/75 D cable (HD 0.8/3.7-RG59 type)... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 22
7/75 D cable (HD 1.0/4.8-RG6 type).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 22
10/50 S cable (RG213-KX4).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 23
10/50 D cable (RG393).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 23
11/50 D cable (RG214-KX13).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 25
11/75 D cable (RG216)... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 26
Cable assemblies
CONTENTS
ECO low loss flexible cables
2.6/50 S cable (ECO316-ECO316X) .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B -12 to B -13
2.6/50 D cable (ECO316D-ECO316DX).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 1 4
5/50 D cable (ECO142-ECO142X-Power142) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B -17 to B -18
6/50 D cable (ECO230).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 20
10/50 D cable (ECO393-ECO393X). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 24
LMR low loss flexible cables
5/50 D cable (LMR200) .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 20
10.3/50 D cable (LMR400).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 25
15.2/50 D cable (LMR600).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 26
SHF Ultra low loss cables .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-37 to B-38
Corrugated cables
Cable 1/4" spiral (HCF 1/4"-50 AlCu) .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 27
Cable 3/8" spiral (HCF 3/8" CuH-50 AlCu) ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 27
Cable 1/2" spiral (HCF 1/2" CuH-50 AlCu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B - 28
Semi-rigid and hand-formable cables
.047" cable (SR copper-SR tinned copper) .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B -28 to B -29
.085" cable (Handformable unjacketed-SR RG405/KS1-SR tinned copper-SR non magnetic-SR aluminium).. . . . . . . . . . . . . . . . . . . . . B -29 to B -31
.141" cable (Handformable unjacketed-Handformable FEP jacketed-SR RG402/KS2
SR tinned copper-SR silvered copper-SR non magnetic-SR aluminium) .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B -32 to B -35
.250" cable (SR RG401/KS3-SR aluminium) ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B -35 to B -36
Radiall cable groups
cable outer diameter in mm (2.6 mm, 5 mm, 10 mm, 11 mm,…)
characteristic impedance (50Ω, 75Ω)
number of shields (S=single, D=double)
Example for flexible cables: 5/50 S
cable outer conductor diameter in fraction of inch (1/4", 3/8", 1/2",…)
Example for corrugated cables: 1/2 spiral
Example for semi-rigid & handformable cables: .141"
cable outer conductor diameter in inches
(.085", .141", .250",…)
B-3
www.radiall.com
Cable assemblies
INTRODUCTION
Radiall is highly recognized as a leading manufacturer of coaxial connectors, cable and cable assemblies.
Radiall has the best manufacturing technology and processes. As a result, we are one of the only manufacturers that have
fully mastered foam PTFE wrapping technology. This capability enables us to supply cable assemblies featuring the highest
level of performance, stability and repeatability.
In addition, Radiall has high precision stripping and cutting machines, soldering and cleaning equipment.
Radiall offers five standard ranges of cable for a wide variety of applications for the telecom, military, instrumentation,
medical and broadcast markets.
Requirements for designing a custom cable-assembly
Start with identifying the needed components and the required information for your cable assembly:
- coaxial cable (p/n or description)
- connector 1 (p/n or description)
- optional boot 1 or heatshrink sleeve 1 (p/n or description)
- connector 2 (p/n or description)
- optional boot or sleeve 2 (p/n or description)
- length: radiall standard = overall length (or please specify if length between reference planes)
+ length tolerance (radiall standard = ±2%)
- marking: Radiall standard = RADIALL + p/n + batch code (or please specify if different)
- connectors orientation (if needed for right-angle or panel connectors)
If you need a pigtail, you will also need the following dimensions and information:
- stripping A dimension
- stripping B dimension
- stripping C dimension
- tinned inner conductor (if needed)
- tinned braid (if needed)
B-4
www.radiall.com
RG flexible cables
Standardized by MIL-C-17 US government specification since
the 40’s, these familiar P/N’s are mainly used for military RF and
microwave applications.
Every electrical, mechanical and environmental performance is
controlled and in compliance with the relevant standard.
KX cables are equivalent to RG cables under french standards
(NF).
These cables will be of perfect use with dynamic applications
(bending moment) or needing flexibility for ease of connection.
Cable assemblies
Specify the right cable for your application
RADIALL Eco-friendly low loss cables
These high performance custom cables have been designed for
optimized electrical and environmental requirements.
Cost effective compared with RG cables, they are the perfect
alternative to fulfill your needs.
These cables are halogen free and flame retardant to meet
safety environmental regulations.
Hand-formable cables
flexibility
Using a tin-dipped braid technology, these cables are a
compromise between performance and flexibility.
They allow easy routing during installation (without springback effect) and multiple repositions on site.
Preserving high performance level (low loss and high shielding
efficiency,) they are a good cost-effective alternative to semirigid cables.
attenuation
Corrugated cables
The outer conductor of these cables is constituted of a
corrugated tube (spiral or ringed winding).
This construction allows perfect shielding and some bendability
while respecting large bending radius.
The hight performance level of these cables enable them to be
used in outdoor long length transmission lines.
Semi-rigid cables
The solid tubing technology allows definitive and high precision
forming. These cables use only high grade insulation material
and feature optimal shielding effectiveness. They provide the
highest electrical performance (e.g: the lowest insertion loss)
KS cables are equivalent to semi-rigid RG cables under French
standards (NF).
These cables can also be used for cosmetic aspect where
straight and clear cable path must be demonstrated.
B-5
www.radiall.com
Cable assemblies
FINDER GUIDE - CABLES VS INSERTION LOSS
STANDARD FLEXIBLE CABLES
Cable
group
0.8/50 S
1/50 S
1/75 S
2/50 S
2/50 D
2/75 S
2.6/50 S
2.6/50 D
2.6/75 S
5/50 S
5/50 D
6/75 S
10/50 S
10/50 D
11/50 D
11/75 D
(11) = 11 GHz
Cable p/n
Cable type
C291 042 066
C291 050 066
C291 055 076
C291 145 007/017
C291 140 087
C291 146 087
C291 147 060
C291 150 000/010
C291 170 007/017
C291 185 067
C291 210 007
C291 305 000/010
C291 320 007
C291 330 000
C291 324 007
C291 322 017
C291 325 270
C291 360 000
C291 361 012
C291 510 000/010
C291 511 007
C291 600 000/010
C291 610 000
132390 type
50 VMTX type
75 VMTX type
RG178/KX21
RG178 non mag type
124416 type
296775 type
RG174/KX3B
RG316/KX22A
RD316
RG179
RG58/KX15
RG142
RG223
RG400
KX23
POWER142
RG59
KX6A
RG213/KX4
RG393
RG214/KX13
RG216
1 GHz
(VHF/UHF)
2 GHz
(band L)
3 GHz
(band S)
6 GHz
(band C)
8 GHz
(band C)
12.4 GHz
(band X)
18 GHz
(band Ku)
dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft
2.41/0.73
2.12/0.64
2.22/0.67
1.54/0.47
1.34/0.41
1.34/0.41
1.38/0.42
1.07/0.32
0.86/0.26
0.86/0.26
0.95/0.29
0.67/0.20
0.44/0.13
0.46/0.14
0.52/0.16
0.48/0.14
0.41/0.12
0.44/0.13
0.48/0.15
0.24/0.07
0.23/0.07
0.24/0.07
0.32/0.10
3.51/1.06
3.36/1.02
3.14/0.95
2.20/0.67
1.92/0.58
1.92/0.58
1.98/0.60
4.93/1.49
4.45/1.35
2.72/0.82
2.37/0.72
2.37/0.72
2.46/0.75
1.24/0.38
1.24/0.38
1.37/0.41
1.54/0.47
1.54/0.47
1.70/0.51
0.65/0.20
0.67/0.20
0.76/0.23
0.70/0.21
0.58/0.18
0.81/0.25
0.85/0.26
0.95/0.29
0.89/0.27
0.72/0.22
1.22/0.37
1.27/0.38
1.42/0.43
1.35/0.41
1.45/0.44
1.51/0.46
1.68/0.51
1.61/0.49
0.35/0.11
0.36/0.11
0.48/0.14
0.45/0.14
0.47/0.14
0.60/0.18
0.71/0.21
0.73/0.22
0.86/0.26 1.07(11)/0.32(11)
0.89/0.27 1.1(11)/0.33(11)
1.90/0.58
1.97/0.60
2.19/0.66
LOW-LOSS ECO-FRIENDLY FLEXIBLE CABLES
(alternative to RG cables - in accordance with RoHS regulation)
Cable
group
2.6/50 S
2.6/50 D
5/50 D
6/50 D
10/50 D
Cable p/n
Cable type
C291 999 904
C291 171 089
C291 999 905
C291 217 020
C291 325 290
C291 320 180
C291 326 490
C291 491 060
C291 512 020
ECO316
ECO316X
ECO316D
ECO316DX
ECO142
ECO142X
ECO230
ECO393
ECO393X
1 GHz
(VHF/UHF)
2 GHz
(band L)
3 GHz
(band S)
6 GHz
(band C)
8 GHz
(band C)
12.4 GHz
(band X)
18 GHz
(band Ku)
dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft
0.76/0.23
0.96/0.29
0.76/0.23
0.86/0.26
0.41/0.12
0.54/0.16
0.28/0.08
0.16/0.05
0.29/0.09
1.09/0.33
1.45/0.44
1.09/0.33
1.30/0.40
0.58/0.18
0.83/0.25
0.40/0.12
0.24/0.07
0.47/0.14
1.34/0.41
1.85/0.56
1.34/0.41
1.68/0.51
2.64/0.80
0.72/0.22
1.07/0.32
1.70/0.51
0.50/0.15 0.59/0.18(4)
0.30/0.09
0.64/0.19
1.11/0.34
2 GHz
(band L)
3 GHz
(band S)
(4) = 4 GHz
LOW-LOSS FLEXIBLE CABLES
Cable
group
Cable p/n
Cable type
LMR200
LMR400
LMR600
C291 316 070
C291 516 070
C291 626 070
LMR200
LMR400
LMR600
1 GHz
(VHF/UHF)
6 GHz
(band C)
8 GHz
(band C)
12.4 GHz
(band X)
18 GHz
(band Ku)
dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft
0.34/0.10
0.14/0.04
0.09/0.03
0.49/0.15
0.20/0.06
0.13/0.04
0.61/0.18
0.25/0.07
0.16/0.05
0.88/0.27
0.37/0.11
0.25/0.07
: Service+ program fast delivery
B-6
www.radiall.com
STANDARD FLEXIBLE HD CABLES
Cable
group
Cable p/n
Cable type
4.6/75 D
C291 333 039
6/75 D
C291 360 093
7/75 D
C291 384 083
HD 0.6/2.8
mini RG59 type
HD 0.8/3.7
RG59 type
HD 1.0/4.8
RG6 type
1 GHz
(VHF/UHF)
2 GHz
(band L)
3 GHz
(band S)
4.5 GHz
(band C)
8 GHz
(band C)
12.4 GHz
(band X)
18 GHz
(band Ku)
dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft
0.34/0.10
0.50/0.15
0.62/0.19
0.25/0.07
0.35/0.11
0.44/0.13
0.54/0.16
0.19/0.06
0.28/0.08
0.35/0.11
0.44/0.13
Cable assemblies
FINDER GUIDE - CABLES VS INSERTION LOSS
CORRUGATED CABLES (spiral outer shielding)
2 GHz
(band L)
3 GHz
(band S)
6 GHz
(band C)
8 GHz
(band C)
Cable
group
Cable p/n
Cable type
Celiflex 1/4"
C291 993 170
HCF 1/4"-50 AlCu
0.27/0.08
0.34/0.10
0.51/0.15
0.60/0.18
Celiflex 3/8"
C291 996 170
HCF 3/8" CuH-50 AlCu
0.19/0.06
0.24/0.07
0.36/0.11
0.43/0.13
Celiflex 1/2"
C291 994 170
HCF 1/2" CuH-50 AlCu
0.16/0.05
0.20/0.06
0.30/0.09
0.36/0.11
(11.7) = 11.7 GHz
12.4 GHz
(band X)
18 GHz
20 GHz
(band Ku) (band Ku)
dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft
0.78/0.24
0.54(11.7)/
0.16(11.7)
0.42(10)/
0.13(11.7)
0.99/0.30
1.06/0.32
12.4 GHz
(band X)
18 GHz
20 GHz
(band Ku) (band Ku)
(10) = 10 GHz
hand-formable and semi-rigid CABLES
Cable
group
Cable p/n
Cable type
.047"
C291 855 001
C291 855 065
SR copper
SR tinned copper
Handformable
unjacketed
SR RG405/KS1
SR tinned copper
SR non magnetic
SR aluminium
Handformable
unjacketed
Handformable
FEP jacketed
SR RG402/KS2
SR tinned copper
SR silvered copper
SR non magnetic
SR aluminium
SR RG401/KS3
SR aluminium
C291 850 001
C291 850 005
C291 851 001
C291 844 187
C291 864 065
C291 866 378
.141"
.250"
3 GHz
(band S)
6 GHz
(band C)
8 GHz
(band C)
dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft dB/m dB/ft
C291 844 065
.085"
2 GHz
(band L)
C291 860 001
C291 862 005
C291 861 066
C291 861 061
C291 864 187
C291 870 001
C291 874 187
1.64/0.50
1.64/0.50
2.03/0.61
2.03/0.61
2.93/0.89
2.93/0.89
3.43/1.04
3.43/1.04
4.73/1.32
4.73/1.32
5.39/1.63
5.39/1.63
5.72/1.73
5.72/1.73
0.97/0.29
1.21/0.37
1.78/0.54
2.10/0.64
2.71/0.82
3.39/1.03
3.62/1.10
0.94/0.29
0.94/0.29
0.94/0.29
0.98/0.30
1.18/0.36
1.18/0.36
1.18/0.36
1.22/0.37
1.73/0.53
1.73/0.53
1.73/0.53
1.80/0.54
2.05/0.62
2.05/0.62
2.05/0.62
2.12/0.64
2.64/0.80
2.64/0.80
2.64/0.80
2.73/0.83
3.31/1.00
3.31/1.00
3.31/1.00
3.41/1.03
3.53/1.07
3.53/1.07
3.53/1.07
3.64/1.10
0.57/0.17
0.72/0.22
1.09/0.33
1.30/0.39
1.71/0.52
2.18/0.66
2.34/0.71
0.63/0.19
0.80/0.24
1.20/0.36
1.42/0.43
1.87/0.57
2.37/0.72
2.54/0.77
0.50/0.15
0.50/0.15
0.50/0.15
0.50/0.15
0.53/0.16
0.31/0.09
0.33/0.10
0.64/0.19
0.64/0.19
0.64/0.19
0.64/0.19
0.67/0.20
0.41/0.12
0.43/0.13
0.97/0.30
0.97/0.30
0.97/0.30
0.97/0.30
1.02/0.31
0.64/0.20
0.68/0.21
1.17/0.35
1.17/0.35
1.17/0.35
1.17/0.35
1.23/0.37
0.79/0.24
0.83/0.25
1.55/0.47
1.55/0.47
1.55/0.47
1.55/0.47
1.62/0.49
1.08/0.33
1.13/0.34
1.99/0.06
1.99/0.06
1.99/0.06
1.99/0.60
2.08/0.63
1.42/0.43
1.48/0.45
2.14/0.65
2.14/0.65
2.14/0.65
2.14/0.65
2.23/0.38
1.54/0.47
1.60/0.49
: Service+ program fast delivery
B-7
www.radiall.com
Cable assemblies
FLEXIBLE CABLE 0.8/50 S
FLEXIBLE CABLE 1/50 S
(132390 type)
(50 VMTX type)
p/n: C291 042 066
p/n: c291 050 066
APPLICATION NOTE
APPLICATION NOTE
The very small outer diameter and bending
moment of this cable allow very easy routing
during installation.
The very small outer diameter and bending
moment of this cable allow very easy routing
during installation.
Its very light weight makes it perfect to
be used in all miniature and space saving
applications.
Its very light weight makes it perfect to
be used in all miniature and space saving
applications.
The insulation and jacket materials allow
this cable to be used in severe thermal
conditions.
The insulation and jacket materials allow this
cable to be used in severe thermal conditions.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid SPC(1)
solid PFA(2)
SPC(1) braid
white FEP(3)
CONSTRUCTION / DIMENSIONS
mm
inches
0.16
0.006
0.50
0.020
0.70
0.028
0.83 max 0.033 max
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
4 mm
0.157 inch
1.8 g / m
0.001 Ibs / ft
dB / m
0.64
0.88
1.90
1.28
1.48
2.41
3.03
3.51
4.20
4.93
SPC = Silver Plated Copper
PFA = PerFluoroAlkoxy
(3)
FEP = Fluorinated Ethylene Propylene
(1)
(2)
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
recommended minimum
bending radius
weight
dB / ft
0.19
0.27
0.58
0.39
0.45
0.73
0.92
1.06
1.27
1.49
inches
0.007
0.020
0.028
0.046
50Ω ± 5Ω
DC - 3 GHz
40 dB
19 000 V rms
7 kW
94 pF / m
28.5 pF / ft
69 % (4.8 ns / m)
6 mm
0.236 inch
3g/m
0.002 Ibs / ft
ENVIRONMENTAL CHARACTERISTICS
-50 / +200 °C
-58 / +392 °F
yes (UL94V0)
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 40 °C)
GHz
0.1
0.2
0.3
0.4
0.5
1.0
1.5
2.0
2.5
3.0
mm
0.17
0.52
0.70
1.17
MECHANICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
material
solid SPC(1)
solid PTFE(2)
SPC(1) braid
white FEP(3)
ELECTRICAL CHARACTERISTICS
50Ω ± 3Ω
DC - 3 GHz
40 dB
18 000 V rms
6 kW
98.7 pF / m
29.9 pF / ft
69 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
center conductor
dielectric
inner shield
outer shield
jacket
operating temperature range
fire resistance
halogen free
-90 / +200 °C
-130 / +392 °F
yes (UL94V0)
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 40 °C)
Watts
45
34
28
22
20
14
12
10
9
8
GHz
0.1
0.2
0.3
0.4
0.5
1.0
1.5
2.0
2.5
3.0
attenuation calculation (dB/m)
dB / m
dB / ft
Watts
0.54
0.16
82
0.80
0.24
58
1.01
0.31
45
1.20
0.36
39
1.37
0.42
34
2.12
0.64
25
2.76
0.84
21
3.36
1.02
17
3.91
1.19
15
4.45
1.35
14
(1.51 x √f GHz) + (0.61 x f GHz)
SPC = Silver Plated Copper
PTFE = PolyTetraFluoroEthylene
(3)
FEP = Fluorinated Ethylene Propylene
(1)
(2)
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
B-8
www.radiall.com
FLEXIBLE CABLE 2/50 S
(75 VMTX type)
(RG178 - KX21A)
p/n: c291 055 076
p/n: c291 145 007
(MIL-C-17/93-RG178)
APPLICATION NOTE
p/n: c291 145 017
Due to its 75 ohms characteristic impedance,
this cable is rather dedicated to TV/Video
application.
The very small outer diameter and bending
moment allow very easy routing during
installation.
Its very light weight makes it perfect to
be used in all miniature, space saving and
dynamic applications.
Usable in severe thermal conditions.
(NF-C-93/550-KX21A)
APPLICATION NOTE
Due to its small diameter and its stranded
inner conductor, RG 178 / KX21A is used for
applications requiring high flexibility.
Its very low bending moment allows an easy
routing during installation.
The insulation and jacket materials allow this
cable to be used in severe thermal conditions.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid SPCCS(1)
solid PTFE(2)
SPC(3) braid
white FEP(4)
mm
0.10
0.57
0.80
1.22
inches
0.004
0.022
0.031
0.048
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
80Ω ± 8Ω
DC - 2 GHz
40 dB
2 600 V rms
0.9 kW
60 pF / m
18.3 pF / ft
69 % (4.8 ns / m)
6.1 mm
0.240 inch
3g/m
0.002 Ibs / ft
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
-90 / +200 °C
-130 / +392 °F
yes (UL94V0)
no
recommended minimum
bending radius
weight
operating temperature range
fire resistance
halogen free
dB / m
dB / ft
Watts
0.70
0.21
86
0.99
0.30
64
1.21
0.37
50
1.40
0.42
41
1.57
0.47
38
1.71
0.52
35
1.98
0.60
30
2.22
0.67
26
2.71
0.82
21
3.14
0.95
18
(2.21 x √f GHz) + (0.005 x f GHz)
SPCCS = Silver Plated Copper covered steel
PTFE = PolyTetraFluoroEthylene
(3)
SPC = Silver Plated Copper
(4)
FEP = Fluorinated Ethylene Propylene
inches
0.012
0.033
0.051
0.07
50Ω ± 3Ω
DC - 3 GHz
40 dB
2 000 V rms
1 kW
96 pF / m
29 pF / ft
70 % (4.8 ns / m)
7 mm
0.275 inch
8g/m
0.0053 Ibs / ft
ENVIRONMENTAL CHARACTERISTICS
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 40 °C)
GHz
0.1
0.2
0.3
0.4
0.5
0.6
0.8
1.0
1.5
2.0
attenuation calculation (dB/m)
mm
0.30
0.84
1.30
1.78
MECHANICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
material
stranded SPCCS(1)
solid PTFE(2)
SPC(3) braid
brown FEP(4)
ELECTRICAL CHARACTERISTICS
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
Cable assemblies
FLEXIBLE CABLE 1/75 S
-55 / +200 °C
-67 / +392 °F
yes (CSA FT6 / IEC 332-2)
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.1
0.2
0.3
0.5
1.0
1.5
2.0
2.5
3.0
attenuation calculation (dB/m)
power calculation (W)
(1)
(2)
dB / m
dB / ft
Watts
0.48
0.14
190
0.68
0.21
134
0.83
0.25
110
1.08
0.33
85
1.54
0.47
60
1.90
0.57
49
2.20
0.67
42
2.47
0.75
38
2.72
0.82
35
(1.50 x √f GHz) + (0.04 x f GHz)
60 / √f GHz
SPCCS = Silver Plated Copper covered steel
PTFE = PolyTetraFluoroEthylene
(3)
SPC = Silver Plated Copper
(4)
FEP = Fluorinated Ethylene Propylene
(1)
(2)
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
B-9
Cable assemblies
FLEXIBLE CABLE 2/50 S
FLEXIBLE CABLE 2/50 D
(non magnetic RG178 type)
(124416 type)
p/n: c291 140 087
p/n: c291 146 087
(MIL-C-17/93-RG178)
APPLICATION NOTE
APPLICATION NOTE
Due to its small diameter this cable will be
used for applications requiring flexibility.
Based on MIL-C17/93 US standard, this cable is
used where non magnetic aspect is required.
Its low bending moment allows an easy
routing during installation.
In addition the solid inner conductor allows
reduced attenuation in comparison with
standard RG178.
The double braid provides a higher level of
shielding in comparison with 2mm single
braided cables.
The insulation and jacket materials allow this
cable to be used in severe thermal conditions.
In addition the solid inner conductor allows a
very good attenuation level.
The insulation and jacket materials allow this
cable to be used in severe thermal conditions.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid SPC(1)
solid PTFE(2)
SPC(1) braid
brown FEP(3)
mm
0.29
0.84
1.30
1.80
inches
0.0114
0.033
0.051
0.071
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
50Ω ± 2Ω
DC - 3 GHz
40 dB
2 000 V rms
1 kW
100 pF / m
30 pF / ft
70 % (4.8 ns / m)
9 mm
0.354 inch
8g/m
0.0053 Ibs / ft
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
-55 / +200 °C
-67 / +392 °F
yes (CSA FT6 / IEC 332-2)
no
recommended minimum
bending radius
weight
dB / m
dB / ft
Watts
0.42
0.13
253
0.59
0.18
179
0.72
0.22
146
0.94
0.28
113
1.34
0.41
80
1.65
0.50
65
1.92
0.58
57
2.16
0.65
51
2.37
0.72
46
(1.30 x √f GHz) + (0.04 x f GHz)
80 / √f GHz
SPC = Silver Plated Copper
PTFE = PolyTetraFluoroEthylene
(3)
FEP = Fluorinated Ethylene Propylene
(1)
(2)
50Ω ± 2Ω
DC - 3 GHz
80 dB
3 000 V rms
1.8 kW
105 pF / m
32 pF / ft
69 % (4.8 ns / m)
12.5 mm
0.49 inch
12.5 g / m
0.0083 Ibs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.1
0.2
0.3
0.5
1.0
1.5
2.0
2.5
3.0
attenuation calculation (dB/m)
power calculation (W)
inches
0.011
0.033
0.050
0.063
0.083
MECHANICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
mm
0.29
0.84
1.27
1.60
2.10
ELECTRICAL CHARACTERISTICS
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
material
solid SPC(1)
solid PTFE(2)
SPC braid
SPC braid
brown FEP(3)
-90 / +200 °C
-130 / +392 °F
yes (UL94V0)
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 40 °C)
GHz
0.1
0.2
0.3
0.5
1.0
1.5
2.0
2.5
3.0
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
Watts
0.42
0.13
253
0.59
0.18
179
0.72
0.22
146
0.94
0.28
113
1.34
0.41
80
1.65
0.50
65
1.92
0.58
57
2.16
0.65
51
2.37
0.72
46
(1.30 x √f GHz) + (0.04 x f GHz)
80 / √f GHz
SPC = Silver Plated Copper
PTFE = PolyTetraFluoroEthylene
(3)
FEP = Fluorinated Ethylene Propylene
(1)
(2)
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
B-10
www.radiall.com
FLEXIBLE CABLE 2.6/50 S
(296775 type)
(RG174 - KX3B)
p/n: C291 147 060
p/n: C291 150 000
(MIL-C-17/119-RG174)
APPLICATION NOTE
p/n: c291 150 010
Due to its 75 ohms characteristic impedance,
this cable is rather dedicated to TV/Video and
networks application.
Its small diameter and light weight make it
perfect to be used in all miniature, space
saving and dymamic applications.
(NF-C-93/550-KX3B)
APPLICATION NOTE
For cost effectiveness reasons and for low
frequency applications, RG174 may be used
instead of RG316 when environmental
conditions like operating temperature allow it.
This cable is compatible with a large range of
connector series.
Cable assemblies
FLEXIBLE CABLE 2/75 S
Cost effective solution
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid SPCCS(1)
solid PE(2)
SPC(3) braid
black LSZH PE(4)
CONSTRUCTION / DIMENSIONS
mm
0.17
1.00
1.32
1.90
inches
0.007
0.039
0.052
0.075
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
0.394 inch
6.6 g / m
0.0044 lbs / ft
-60 / +85 °C
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
recommended minimum
bending radius
weight
operating temperature range
fire resistance
halogen free
no
yes (IEC 754-2)
50Ω ± 2Ω
DC - 1 GHz
40 dB
2 000 V rms
1.4 kW
97.5 pF / m
29.5 pF / ft
66 % (5 ns / m)
10 mm
0.394 inch
13 g / m
0.0088 Ibs / ft
-40 / +85 °C
no
no
-40 / +185 °F
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
dB / m
dB / ft
Watts
0.42
0.13
41
0.60
0.18
29
0.74
0.22
23
0.86
0.26
20
1.06
0.32
16
1.38
0.42
12
1.70
0.52
10
1.98
0.60
8
2.23
0.68
7
2.46
0.75
6
(1.317 x √f GHz) + (0.06 x f GHz)
SPCCS = Silver Plated Copper covered steel
PE = PolyEthylene
(3)
SPC = Silver Plated Copper
(4)
LSZH PE = Low Smoke Zero Halogen PolyEthylene
inches
0.019
0.060
0.087
0.110
ENVIRONMENTAL CHARACTERISTICS
-40 / +185 °F
FREQUENCY / ATTENUATION (typ. / 25 °C) /
CW MAX POWER (sea level / 40 °C)
GHz
0.1
0.2
0.3
0.4
0.6
1.0
1.5
2.0
2.5
3.0
attenuation calculation (dB/m)
mm
0.48
1.52
2.21
2.79
MECHANICAL CHARACTERISTICS
10 mm
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
material
stranded CCS(1)
solid PE(2)
TC(3) braid
black PVC(4)
ELECTRICAL CHARACTERISTICS
75Ω ± 5Ω
DC - 3 GHz
50 dB min
8 000 V rms
400 W
67 pF / m
20.1 pF / ft
66 % (5 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
center conductor
dielectric
inner shield
outer shield
jacket
GHz
0.05
0.1
0.2
0.3
0.5
0.6
0.7
0.8
1.0
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
Watts
0.23
0.07
72
0.33
0.10
51
0.47
0.14
36
0.58
0.17
29
0.75
0.23
23
0.82
0.25
21
0.89
0.27
19
0.95
0.29
18
1.07
0.32
16
(1.03 x √f GHz) + (0.04 x f GHz)
16 / √f GHz
CCS = Copper Covered Steel
PE = PolyEthylene
(3)
TC = Tinned Copper
(4)
PVC = PolyVinyl Chloride
(1)
(1)
(2)
(2)
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
B-11
Cable assemblies
FLEXIBLE CABLE 2.6/50 S
LOW LOSS FLEXIBLE CABLE 2.6/50 S
(RG316 - KX22A)
(ECO316: alternative to RG316)
p/n: C291 170 007
p/n: C291 999 904
(MIL-C-17/113-RG316)
APPLICATION NOTE
p/n: C291 170 017
Designed by RADIALL, ECO316 is an
advantageous alternative solution to RG316:
• Advantageous in term of electrical
performance: its optimized construction allows
better attenuation and screening effectiveness
than RG316 and RG 174.
• Advantageous in term of environmental
aspect: halogen and sulphur free, this
cable does not emit any toxic substance
when submitted to fire. The flame retardant
jacket allows ECO316 to meet fire resistance
standards.
• Advantageous in term of price: ECO316 design
has integrated all RADIALL knowledge to reach
the best performances with a very competitive
price.
ECO316 is UL style 1375 approved.
This cable is compatible with a large range
of connector series.
(NF-C-93/550-KX22A)
APPLICATION NOTE
RG316 is one of the most popular RG cables.
This cable has a good flexibility and a better
attenuation than RG174.
Usable in severe thermal conditions, this cable
is compatible with a large range of connector
series.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
stranded SPCCS(1)
solid PTFE(2)
SPC(3) braid
brown FEP(4)
mm
0.53
1.52
1.98
2.49
inches
0.021
0.060
0.078
0.098
CONSTRUCTION / DIMENSIONS
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
ECO-Friendly cable
Cost effective solution
50Ω ± 2Ω
DC - 3 GHz
40 dB
2 000 V rms
1.8 kW
96 pF / m
29 pF / ft
70 % (4.8 ns / m)
center conductor
dielectric
inner shield
outer shield
jacket
10 mm
0.394 inch
17 g / m
0.0110 Ibs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
GHz
0.1
0.2
0.3
0.5
1.0
1.5
2.0
2.5
3.0
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
0.26
0.08
0.37
0.11
0.46
0.14
0.60
0.18
0.86
0.26
1.06
0.32
1.24
0.38
1.40
0.42
1.54
0.47
(0.82 x √f GHz) + (0.04 x f
130 / √f GHz
SPCCS = Silver Plated Copper covered steel
PTFE = PolyTetraFluoroEthylene
SPC = Silver Plated Copper
(4)
FEP = Fluorinated Ethylene Propylene
(1)
(2)
(3)
Watts
411
291
237
184
130
106
92
82
75
GHz)
inches
0.022
0.061
0.075
0.096
50Ω ± 2Ω
DC - 3 GHz
50 dB
2 000 V rms
1.4 kW
84 pF / m
25.5 pF / ft
80 % (4.15 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
-55 / +200 °C
-67 / +392 °F
yes (CSA FT6 / IEC 332-2)
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
mm
0.55
1.55
1.90
2.45
ELECTRICAL CHARACTERISTICS
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
material
solid OFC(1)
foam PE(2)
OFC(1) braid
black LSZH PE(3)
15 mm
0.590 inch
10 g / m
0.0066 Ibs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +85 °C
-40 / +185 °F
yes (UL1581 VW1 / IEC 332-1)
yes (IEC 754-2)
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.1
0.2
0.3
0.5
1.0
1.5
2.0
2.5
3.0
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
Watts
0.24
0.07
120
0.33
0.10
85
0.41
0.12
69
0.53
0.16
54
0.76
0.23
38
0.94
0.28
31
1.09
0.33
27
1.22
0.37
24
1.34
0.41
22
(0.74 x √f GHz) + (0.02 x f GHz)
38 / √f GHz
OFC = Oxygen Free Copper
PE = PolyEthylene
(3)
LSZH PE = Low Smoke Zero Halogen PolyEthylene
(1)
(2)
B-12
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
(RD316)
p/n: c291 171 083
p/n: C291 185 067
APPLICATION NOTE
APPLICATION NOTE
Designed by RADIALL, ECO316X is an
advantageous alternative solution to ECO316
when higher power level is required:
• Advantageous in term of electrical
performance: the crosslink foam polyethylene
used as dielectric material allows higher
temperature level (thus power range) than
ECO316.
• Advantageous in term of environmental
aspect: halogen and sulphur free, this cable
does not emit any toxic substance when
submitted to fire. The flame retardant jacket
allows ECO316X to meet fire resistance
standards.
• Advantageous in term of price: ECO316X
design has integrated all RADIALL knowledge
to reach the best performances with a very
competitive price.
ECO316X is UL style 1375 and 3651 approved
This cable is compatible with a large range
of standard connector series.
ECO-Friendly cable
Cost effective solution
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
jacket
FLEXIBLE CABLE 2.6/50 D
material
stranded SPC(1)
X foam PE(2)
SPC(1) braid
blue LSZH PE(3)
mm
0.54
1.54
2.05
2.52
50Ω ± 2Ω
DC - 3 GHz
35 dB
3 000 V rms
94.5 pF / m
28.7 pF / ft
71 % (4.7 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
5 mm
0.197 inch
16 g / m
0.011 Ibs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
-40 / +105 °C
-40 / +221 °F
yes (UL1581 VW1 / IEC 332-1)
yes (IEC 754-2)
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
dB / m
dB / ft
Watts
0.27
0.08
285
0.49
0.15
164
0.65
0.20
127
0.72
0.22
116
0.84
0.26
101
0.96
0.29
90
1.22
0.37
73
1.45
0.44
64
1.66
0.50
57
1.85
0.56
52
(0.81 x √f GHz) + (0.15 x f GHz)
90 / √f GHz
mm
0.53
1.52
1.90
2.30
2.80
inches
0.021
0.060
0.075
0.091
0.110
50Ω ± 2Ω
DC - 3 GHz
60 dB
2 000 V rms
1.8 kW
96 pF / m
29 pF / ft
70 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
15 mm
0.590 inch
27 g / m
0.0181 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-55 / +200 °C
-67 / +392 °F
yes (CSA FT6 / IEC 332-2)
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.1
0.2
0.3
0.5
1.0
1.5
2.0
2.5
3.0
attenuation calculation (dB/m)
power calculation (W)
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 20 °C)
GHz
0.1
0.3
0.5
0.6
0.8
1.0
1.5
2.0
2.5
3.0
attenuation calculation (dB/m)
power calculation (W)
material
stranded SPC(1)
solid PTFE(2)
SPC(1) braid
SPC(1) braid
brown FEP(3)
ELECTRICAL CHARACTERISTICS
inches
0.021
0.061
0.081
0.099
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
capacitance
velocity of propagation
Based on the RG 316 construction, RD316 has
an outer shield braid which allows higher
screening effectiveness and better mechanical
resistance.
Usable in severe thermal conditions, this cable
is compatible with a large range of connector
series.
Cable assemblies
LOW LOSS FLEXIBLE
CABLE 2.6/50 S (ECO316X)
dB / m
dB / ft
0.26
0.08
0.37
0.11
0.46
0.14
0.60
0.18
0.86
0.26
1.06
0.32
1.24
0.38
1.40
0.42
1.54
0.47
(0.82 x √f GHz) + (0.04 x f
130 / √f GHz
Watts
411
291
237
184
130
106
92
82
75
GHz)
SPC = Silver Plated Copper
PTFE = PolyTetraFluoroEthylene
(3)
FEP = Fluorinated Ethylene Propylene
(1)
(2)
SPC = Silver Plated Copper
X foam PE = Crosslink foam PolyEthylene
(3)
LSZH PE = Low Smoke Zero Halogen PolyEthylene
(1)
(2)
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
B-13
Cable assemblies
LOW LOSS FLEXIBLE CABLE
2.6/50 D (ECO316D: alternative to RD316)
LOW LOSS FLEXIBLE
CABLE 2.6/50 D (ECO316DX)
p/n: C291 999 905
p/n: c291 217 020
APPLICATION NOTE
APPLICATION NOTE
Designed by RADIALL, ECO316D is an
advantageous alternative solution to RD316:
• Advantageous in term of electrical
performance: its optimized construction allows
better attenuation and screening effectiveness
than RD316.
• Advantageous in term of environmental
aspect: halogen and sulphur free, this cable
does not emit any toxic substance when
submitted to fire. The flame retardant jacket
allows ECO316D to meet fire resistance
standards.
ECO-Friendly cable
Cost effective solution
• Advantageous in term of price: ECO316D
design has integrated all RADIALL knowledge
to reach the best performances with a very
competitive price.
ECO316D is UL style 1375 approved.
ECO-Friendly cable
Cost effective solution
This cable is compatible with a large range
of connector series.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid OFC(1)
foam PE(2)
OFC(1) braid
OFC(1) braid
black LSZH PE(3)
CONSTRUCTION / DIMENSIONS
mm
0.55
1.55
1.90
2.30
2.80
inches
0.022
0.061
0.075
0.091
0.110
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
50Ω ± 2Ω
DC - 3 GHz
65 dB
2 000 V rms
1.4 kW
84 pF / m
25.5 pF / ft
80 % (4.15 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
15 mm
0.590 inch
16 g / m
0.0106 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
B-14
Designed by RADIALL, ECO316DX is an
advantageous alternative solution to ECO316D
when higher power level is required:
• Advantageous in term of electrical
performance: the crosslink foam polyethylene
used as dielectric material allows higher
temperature level (thus power range) than
ECO316D.
• Advantageous in term of environmental
aspect: halogen and sulphur free, this cable
does not emit any toxic substance when
submitted to fire. The flame retardant jacket
allows ECO316DX to meet fire resistance
standards.
• Advantageous in term of price: ECO316DX
design has integrated all RADIALL knowledge
to reach the best performances with a very
competitive price.
ECO316DX is UL style 1375 and 3651 approved.
This cable is compatible with a large range
of standard connector series.
-40 / +85 °C
-40 / +185 °F
yes (UL 1581 VW1 / IEC 332-1)
yes (IEC 754-2)
center conductor
dielectric
inner shield
outer shield
jacket
material
stranded SPC(1)
X foam PE(2)
SPC(1) braid
SPC(1) braid
black with blue stripe
LSZH PE(3)
mm
0.54
1.54
2.03
2.50
inches
0.021
0.061
0.080
0.098
3.16
0.124
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
capacitance
velocity of propagation
50Ω ± 2Ω
DC - 6 GHz
70 dB (DC - 5 GHz)
1 500 V rms
94.5 pF / m
28.7 pF / ft
71 % (4.7 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
5 mm
0.196 inch
21 g / m
0.0140 Ibs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +105 °C
-40 / +221 °F
yes (UL1581 VW1 / IEC 332-1)
yes (IEC 754-2)
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
dB / m
dB / ft
Watts
0.1
0.24
0.07
120
0.2
0.33
0.10
85
0.3
0.41
0.12
69
0.5
0.53
0.16
54
1.0
0.76
0.23
38
1.5
0.94
0.28
31
2.0
1.09
0.33
27
2.5
1.22
0.37
24
3.0
1.34
0.41
22
attenuation calculation (dB/m)
(0.74 x √f GHz) + (0.02 x f GHz)
power calculation (W)
38 / √f GHz
(1)
OFC = Oxygen Free Copper
(2)
PE = PolyEthylene
(3)
LSZH PE = Low Smoke Zero Halogen PolyEthylene
GHz
dB / m
dB / ft
Watts
0.5
0.58
0.17
127
1.0
0.86
0.26
90
1.5
1.09
0.33
73
2.0
1.30
0.40
64
2.5
1.50
0.45
57
3.0
1.68
0.51
52
3.5
1.85
0.56
48
4.0
2.02
0.61
45
5.0
2.34
0.71
40
6.0
2.64
0.80
37
attenuation calculation (dB/m)
(0.71 x √f GHz) + (0.15 x f GHz)
power calculation (W)
90 / √f GHz
(1)
SPC = Silver Plated Copper
(2)
X foam PE = Crosslink foam PolyEthylene
(3)
LSZH PE = Low Smoke Zero Halogen PolyEthylene
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
FLEXIBLE CABLE 2.6/75 S
(HD 0.6/2.8 - mini RG59 type)
(RG179)
p/n: C291 333 039
p/n: C291 210 007
(MIL-C-17/94-RG179)
APPLICATION NOTE
APPLICATION NOTE
Due to its 75 ohms characteristic impedance,
RG179 is rather dedicated to TV/Video
application.
Due to its 75 ohms characteristic impedance,
this cable is rather dedicated to HDTV/Video
application.
Its small internal stranded inner conductor
diameter allows high flexibility for an easy
routing.
Usable in severe thermal conditions.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid BC(1)
foam PE(2)
Triplex tape Al(3)/PES(4)/Al
TC(5) braid
purple LSZH PE(6)
CONSTRUCTION / DIMENSIONS
mm
0.60
2.80
2.90
3.30
4.60
inches
0.024
0.110
0.114
0.130
0.181
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
37 mm
1.46 inch
24 g / m
0.0161 lbs / ft
recommended minimum
bending radius
weight
operating temperature range
fire resistance
halogen free
75Ω ± 3Ω
DC - 3 GHz
40 dB
2 000 V rms
1.6 kW
69 pF / m
21 pF / ft
70 % (4.8 ns / m)
10 mm
0.400 inch
14.5 g / m
0.0097 lbs / ft
-55 / +200 °C
-67 / +392 °F
yes (CSA FT6 / IEC 332-2)
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
dB / m
dB / ft
Watts
0.073
0.022
0.103
0.031
0.238
0.072
0.305
0.092
0.343
0.104
0.426
0.129
0.499
0.151
0.563
0.171
0.623
0.189
(0.32 x √f GHz) + (0.023 x f GHz)
BC = Bare Copper
PE = PolyEthylene
(3)
Al = Aluminum
(4)
PES = PolyESter
(5)
TC = Tinned Copper
(6)
LSZH PE = Low Smoke Zero Halogen PolyEthylene
inches
0.012
0.063
0.079
0.100
ENVIRONMENTAL CHARACTERISTICS
-20 / +70 °C
-4 / +158 °F
yes (IEC 60332-1)
yes (IEC 60754-1 & -2)
GHz
0.1
0.2
0.3
0.5
1.0
1.5
2.0
2.5
3.0
attenuation calculation (dB/m)
power calculation (W)
(1)
(2)
mm
0.30
1.60
2.00
2.54
MECHANICAL CHARACTERISTICS
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.05
0.1
0.5
0.8
1.0
1.5
2.0
2.5
3.0
attenuation calculation (dB/m)
material
stranded SPCCS(1)
solid PTFE(2)
SPC(3) braid
brown FEP(4)
ELECTRICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
center conductor
dielectric
inner shield
outer shield
jacket
75Ω ± 3Ω
DC - 3 GHz
1 500 V rms
56 pF / m
17.07 pF / ft
78 % (4.3 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
Cable assemblies
FLEXIBLE CABLE 4.6/75 D
dB / m
dB / ft
0.29
0.09
0.41
0.13
0.51
0.15
0.66
0.20
0.95
0.29
1.17
0.36
1.37
0.41
1.54
0.47
1.70
0.51
(0.91 x √f GHz) + (0.04 x f
250 / √f GHz
Watts
791
559
456
354
250
204
117
158
144
GHz)
SPCCS = Silver Plated Copper Covered Steel
PTFE = PolyTetraFluoroEthylene
(3)
SPC = Silver Plated Copper
(4)
FEP = Fluorinated Ethylene Propylene
(1)
(2)
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
B-15
Cable assemblies
FLEXIBLE CABLE 5/50 S
FLEXIBLE CABLE 5/50 D
(RG58 - KX15)
(RG142)
p/n: C291 305 000
p/n: C291 320 007
p/n: c291 305 010
APPLICATION NOTE
(MIL-C-17/28-RG58)
(MIL-C-17/158-RG142)
(NF-C-93/550-KX15)
RG142 is one of the most popular RG cables.
APPLICATION NOTE
RG58 is one of the most popular RG cables.
Due to its construction and raw materials
construction, RG58 / KX15 is far to be as
performant as the equivalent 5/50 cables
( RG142, RG223, ECO142 )
However, this very flexible cable must be
considered for applications requiring low
electrical performance and reduced cost.
This cable presents a good compromise
between flexibility and electrical performances.
RG142 will be selected among other 5/50 RG's
for applications requiring high frequency range
and low attenuation.
Usable in severe thermal conditions.
CONSTRUCTION / DIMENSIONS
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
stranded TC(1)
solid PE(2)
TC(1) braid
black PVC(3)
mm
0.90
2.95
3.66
4.95
inches
0.035
0.116
0.144
0.195
center conductor
dielectric
inner shield
outer shield
jacket
50Ω ± 2Ω
DC - 1 GHz
40 dB
5 000 V rms
2.6 kW
96 pF / m
29 pF / ft
66 % (5 ns / m)
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
recommended minimum
bending radius
weight
20 mm
0.787 inch
35 g / m
0.0234 Ibs / ft
-40 / +85 °C
no
no
operating temperature range
fire resistance
halogen free
-40 / +185 °F
TC = Tinned Copper
PE = PolyEthylene
(3)
PVC = PolyVinyl Chloride
(1)
(2)
B-16
dB / m
dB / ft
0.14
0.04
0.20
0.06
0.29
0.09
0.36
0.11
0.47
0.14
0.51
0.16
0.56
0.17
0.60
0.18
0.67
0.20
(0.63 x √f GHz) + (0.04 x f
55 / √f GHz
25 mm
0.984 inch
64 g / m
0.043 Ibs / ft
-55 / +200 °C
-67 / +392 °F
yes (CSA FT6 / IEC 332-2)
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.05
0.1
0.2
0.3
0.5
0.6
0.7
0.8
1.0
attenuation calculation (dB/m)
power calculation (W)
50Ω ± 2Ω
DC - 12.4 GHz
65 dB (DC - 3GHz)
5 000 V rms
3.4 kW
97 pF / m
29.3 pF / ft
70 % (4.8 ns / m)
ENVIRONMENTAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
inches
0.037
0.116
0.165
0.195
MECHANICAL CHARACTERISTICS
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
mm
0.94
2.95
4.19
4.95
ELECTRICAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
material
solid SPCCS(1)
solid PTFE(2)
SPC(3) braid
SPC(3) braid
brown FEP(4)
Watts
246
174
123
100
78
71
66
61
55
GHz)
GHz
0.5
1.0
1.5
2.0
3.0
6.0
8.0
10.0
12.4
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
0.30
0.09
0.44
0.13
0.55
0.17
0.65
0.20
0.81
0.25
1.22
0.37
1.45
0.44
1.66
0.50
1.90
0.58
(0.40 x √f GHz) + (0.04 x f
470 / √f GHz
Watts
665
470
384
332
271
192
166
149
133
GHz)
SPCCS = Silver Plated Copper Covered Steel
PTFE = PolyTetraFluoroEthylene
(3)
SPC = Silver Plated Copper
(4)
FEP = Fluorinated Ethylene Propylene
(1)
(2)
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
LOW LOSS FLEXIBLE
CABLE 5/50 D (ECO142X)
p/n: C291 325 290
p/n: c291 320 180
APPLICATION NOTE
APPLICATION NOTE
Designed by RADIALL, ECO142 is an
advantageous alternative solution to RG142:
• Advantageous in term of electrical
performance: its optimized construction allows
better attenuation and screening effectiveness
than RG142.
• Advantageous in term of environmental
aspect: halogen and sulphur free, this cable
does not emit any toxic substance when
submitted to fire.
The flame retardant jacket allows ECO142 to
meet fire resistance standards.
ECO-Friendly cable
Cost effective solution
• Advantageous in term of price: ECO142 design
has integrated all RADIALL knowledge to reach
the best performances with a very competitive
price.
ECO142 is UL style 1375 approved.
ECO-Friendly cable
Cost effective solution
This cable is compatible with a large range of
connector series.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid OFC(1) copper
foam PE(2)
Al(3) foil
TC(4) braid
black LSZH PE(5)
CONSTRUCTION / DIMENSIONS
mm
0.95
2.85
3.10
3.50
4.50
inches
0.037
0.112
0.122
0.138
0.177
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
50Ω ± 2Ω
DC - 3 GHz
80 dB (DC - 3 GHz)
5 000 V rms
2.7 kW
87 pF / m
26.4 pF / ft
77 % (4.3 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
center conductor
dielectric
inner shield
outer shield
jacket
material
solid SPC(1)
X foam PE(2)
SPC(1) braid
SPC(1) braid
black with blue stripe
LSZH PE(3)
mm
0.95
2.98
3.64
4.30
inches
0.037
0.117
0.143
0.169
5.00
0.197
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
capacitance
velocity of propagation
50Ω ± 2Ω
DC - 6 GHz
75 dB (DC - 5 GHz)
5 000 V rms
94.5 pF / m
28.7 pF / ft
71 % (4.7 ns / m)
MECHANICAL CHARACTERISTICS
15 mm
0.590 inch
36 g / m
0.0242 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
Designed by RADIALL, ECO142X is an
advantageous alternative solution to ECO142
when higher power level is required:
• Advantageous in term of electrical
performance: the crosslink foam polyethylene
used as dielectric material allows higher
temperature level (thus power range) than
ECO142.
• Advantageous in term of environmental
aspect: halogen and sulphur free, this cable
does not emit any toxic substance when
submitted to fire. The flame retardant jacket
allows ECO142X to meet fire resistance
standards.
• Advantageous in term of price: ECO142X
design has integrated all RADIALL knowledge
to reach the best performances with a very
competitive price.
ECO142X is UL style 1375 and 3651 approved.
This cable is compatible with a large range
of standard connector series.
Cable assemblies
LOW LOSS FLEXIBLE CABLE
5/50 D (ECO142: alternative to RG142)
recommended minimum
bending radius
weight
30 mm
1.18 inch
60 g / m
0.0433 Ibs / ft
ENVIRONMENTAL CHARACTERISTICS
-40 / +85 °C
-40 / +185 °F
yes (UL1581 VW1 / IEC 332-1)
yes (IEC 754-2)
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
operating temperature range
fire resistance
halogen free
-40 / +105 °C
-40 / +221 °F
yes (UL1581 VW1 / IEC 332-1)
yes (IEC 754-2)
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
dB / m
dB / ft
Watts
0.1
0.12
0.04
411
0.2
0.18
0.05
291
0.3
0.22
0.07
237
0.5
0.28
0.09
184
1.0
0.41
0.12
130
1.5
0.50
0.15
106
2.0
0.58
0.18
92
2.5
0.66
0.20
82
3.0
0.73
0.22
75
attenuation calculation (dB/m)
(0.385 x √f GHz) + (0.02 x f GHz)
power calculation (W)
130 / √f GHz
(1)
OFC = Oxygen Free Copper
(2)
PE = PolyEthylene
(3)
Al = Aluminum
(4)
TC = Tinned Copper
(5)
LSZH PE = Low Smoke Zero Halogen PolyEthylene
GHz
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5.0
6.0
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
Watts
0.36
0.11
354
0.54
0.16
250
0.69
0.21
204
0.83
0.25
177
0.95
0.29
158
1.07
0.32
144
1.18
0.36
134
1.29
0.39
125
1.50
0.45
112
1.70
0.51
102
(0.44 x √f GHz) + (0.103 x f GHz)
250 / √f GHz
SPC = Silver Plated Copper
X foam PE = Crosslink foam PolyEthylene
(3)
LSZH PE = Low Smoke Zero Halogen PolyEthylene
(1)
(2)
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
B-17
Cable assemblies
LOW LOSS FLEXIBLE CABLE 5/50 D
FLEXIBLE CABLE 5/50 D
(POWER142: alternative to RG142)
(RG223)
p/n: C291 325 270
p/n: C291 330 000
(MIL-C-17/84-RG223)
APPLICATION NOTE
Designed by RADIALL, POWER142 is an
advantageous alternative solution to ECO142
when high power level is required:
APPLICATION NOTE
RG223 is one of the most popular RG cables.
This cable presents a good compromise
between flexibility and electrical
performances.
• Advantageous in term of electrical
performance: its optimized construction allows
better attenuation and screening effectiveness
than RG142 and higher power level than
ECO142.
• Advantageous in term of environmental
aspect: the flame retardant jacket allows
POWER142 to meet fire resistance standards.
• Advantageous in term of price: POWER142
design has integrated all RADIALL knowledge
to reach the best performances with a very
competitive price.
POWER142 is UL style 1375 approved.
RG223 can be used instead of RG142 for cost
reasons in applications that do not require
high temperature resistance.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
This cable is compatible with a large range
of connector series.
center conductor
dielectric
inner shield
outer shield
jacket
mm
0.92
2.97
3.20
3.60
4.50
50Ω ± 2Ω
DC - 3 GHz
90 dB (DC - 3 GHz)
5 000 V rms
3.4 kW
97 pF / m
29.3 pF / ft
69 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
25 mm
0.980 inch
40 g / m
0.0269 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +105 °C
-40 / +221 °F
yes (UL1581 VW1 / IEC 332-1)
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 40 °C)
GHz
0.2
0.4
0.6
0.8
1.0
1.5
2.0
2.5
3.0
attenuation calculation (dB/m)
power calculation (W)
(1)
B-18
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
inches
0.036
0.117
0.126
0.142
0.177
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
mm
0.89
2.95
4.19
5.38
inches
0.035
0.116
0.165
0.212
ELECTRICAL CHARACTERISTICS
CONSTRUCTION / DIMENSIONS
material
solid SPC(1)
solid PTFE(2)
Al(3) foil
TC(4) braid
black LSZH PE(5)
material
solid SPC(1)
solid PE(2)
SPC(1) braid
SPC(1) braid
black PVC(3)
dB / m
dB / ft
Watts
0.18
0.05
470
0.26
0.08
332
0.32
0.10
271
0.37
0.11
235
0.41
0.12
210
0.50
0.15
171
0.58
0.18
148
0.66
0.20
133
0.72
0.22
121
(0.402 x √f GHz) + (0.008 x f GHz)
210 / √f GHz
50Ω ± 2Ω
DC - 12.4 GHz
65 dB (DC - 3 GHz)
5 000 V rms
2.6 kW
96 pF / m
29 pF / ft
66 % (5 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
25 mm
0.984 inch
55 g / m
0.0370 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +85 °C
no
no
-40 / +185 °F
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.5
1.0
1.5
2.0
3.0
6.0
8.0
10.0
12.4
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
Watts
0.32
0.10
71
0.46
0.14
50
0.57
0.17
41
0.67
0.20
35
0.85
0.26
29
1.27
0.38
20
1.51
0.46
18
1.73
0.52
16
1.97
0.60
14
(0.42 x √f GHz) + (0.04 x f GHz)
50 / √f GHz
SPC = Silver Plated Copper
PE = PolyEthylene
(3)
PVC = PolyVinyl Chloride
(1)
(2)
SPC = Silver Plated Copper
(2)
PTFE = PolyTetraFluoroEthylene
(3)
Al = Aluminum
(4)
TC = Tinned Copper
(5)
LSZH PE = Low Smoke Zero Halogen PolyEthylene
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
FLEXIBLE CABLE 5/50 D
(RG400)
(KX23)
p/n: C291 324 007
p/n: C291 322 017
APPLICATION NOTE
APPLICATION NOTE
(MIL-C-17/128-RG400)
(NF-C-93/550-KX23)
Relevant standard: NF-C-93/550-KX23 (France)
Due to its stranded inner conductor, RG 400
is much more flexible than RG142 and RG223.
Due to its stranded inner conductor it is much
more flexible than RG142 or RG223.
This cable will be chosen instead
of equivalent RG's for specific applications
requiring high flexibility
This cable will be chosen instead of equivalent
RG's for specific applications requiring high
flexibility.
Usable in severe thermal conditions.
Usable in severe thermal conditions.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
stranded SPC(1)
solid PTFE(2)
SPC(1) braid
SPC(1) braid
brown FEP(3)
CONSTRUCTION / DIMENSIONS
mm
0.98
2.95
4.19
4.95
inches
0.039
0.116
0.165
0.195
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
20 mm
0.79 inch
66 g / m
0.0442 lbs / ft
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
inches
0.036
0.116
0.171
0.201
50Ω ± 2.5Ω
DC - 8 GHz
65 dB (DC - 3 GHz)
5 000 V rms
3 kW
95 pF / m
28.8 pF / ft
70 % (4.8 ns / m)
recommended minimum
bending radius
weight
dB / m
dB / ft
0.36
0.11
0.52
0.16
0.65
0.20
0.76
0.23
0.95
0.29
1.42
0.43
1.68
0.51
1.92
0.58
2.19
0.66
(0.48 x √f GHz) + (0.04 x f
470 / √f GHz
30 mm
1.181 inch
70 g / m
0.0466 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
-55 / +200 °C
-67 / +392 °F
yes (CSA FT6 / IEC 332-2)
no
SPC = Silver Plated Copper
PTFE = PolyTetraFluoroEthylene
(3)
FEP = Fluorinated Ethylene Propylene
mm
0.92
2.95
4.34
5.10
MECHANICAL CHARACTERISTICS
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.5
1.0
1.5
2.0
3.0
6.0
8.0
10.0
12.4
attenuation calculation (dB/m)
power calculation (W)
material
stranded SPC(1)
solid PTFE(2)
SPC braid
SPC braid
Translucent Fiber Glass
ELECTRICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
center conductor
dielectric
inner shield
outer shield
jacket
50Ω ± 2Ω
DC - 12.4 GHz
65 dB (DC - 3 GHz)
5 000 V rms
3.4 kW
97 pF / m
29.3 pF / ft
70 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
Cable assemblies
FLEXIBLE CABLE 5/50 D
operating temperature range
fire resistance
halogen free
-55 / +200 °C
-67 / +392 °F
yes (IEC 60332-1)
no
FREQUENCY / ATTENUATION (typ. / 25 °C) /
CW MAX POWER (sea level / 40 °C)
Watts
665
470
384
332
271
192
166
149
133
GHz)
GHz
0.5
1.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
attenuation calculation (dB/m)
(1)
(1)
(2)
(2)
dB / m
dB / ft
Watts
0.33
0.10
375
0.48
0.14
260
0.60
0.18
210
0.70
0.21
180
0.80
0.24
160
0.89
0.27
146
1.05
0.32
126
1.20
0.37
112
1.35
0.41
102
1.61
0.49
88
(0.427 x √f GHz) + (0.05 x f GHz)
SPC = Silver Plated Copper
PTFE = PolyTetraFluoroEthylene
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
B-19
Cable assemblies
LOW LOSS FLEXIBLE
CABLE 5/50 D (LMR200 type)
LOW LOSS FLEXIBLE
CABLE 6/50 D (ECO230)
p/n: C291 316 070
p/n: C291 326 490
APPLICATION NOTE
APPLICATION NOTE
This LMR200 type cable can be considered
as an alternative to equivalent diameter
corrugated cables.
The main advantage is greater flexibility and
bendability allowing easy routing during the
installation.
The foam dielectric provides excellent loss
and low return loss levels.
The double screen construction (Aluminum
foil + tinned copper braid) offers a high level
of shielding as well as low leakage.
This cable will be advised for feeder and
jumper assemblies in cellular networks as
well as applications requiring easy routing.
Designed by RADIALL, ECO230 is an
advantageous alternative solution to 5 mm dia.
cables when higher power level is required:
• Advantageous in term of electrical
performance: its optimized construction allows
better attenuation and screening effectiveness
than RG cables.
• Advantageous in term of environmental
aspect: halogen and sulphur free, this cable
does not emit any toxic substance when
submitted to fire.
The flame retardant jacket allows ECO230 to
meet fire resistance standards.
• Advantageous in term of price: ECO230
design has integrated all RADIALL knowledge
to reach the best performances with a very
competitive price.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid copper
foam PE(1)
Al(2) foil
TC(3) braid
black PE(1)
mm
1.12
2.95
3.07
3.66
4.95
inches
0.044
0.116
0.121
0.144
0.195
ELECTRICAL CHARACTERISTICS
characteristic impedance
cut-off frequency
recommend. operat. freq. range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
50Ω ± 2Ω
39 GHz
DC - 6 GHz
> 90 dB
1 000 V DC
2.5 kW
80.3 pF / m
24.5 pF / ft
83 % (4.0 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
12.7 mm
0.50 inch
30 g / m
0.022 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +85 °C
no
no
-40 / +185 °F
FREQUENCY / ATTENUATION (typ.) /
CW TYP POWER (sea level / 40 °C)
GHz
0.1
0.5
1.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
attenuation calculation (dB/m)
(1)
(2)
B-20
PE = PolyEthylene
Al = Aluminum
(3)
TC = Tinned Copper
dB / m
dB / ft
Watts
0.11
0.03
560
0.24
0.07
240
0.34
0.10
170
0.42
0.13
140
0.49
0.15
120
0.55
0.17
110
0.61
0.18
100
0.71
0.22
80
0.80
0.24
70
0.88
0.27
65
(0.333 x √f GHz) + (0.011 x f GHz)
ECO230 is UL style 1375 approved.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
OFC(1) copper
foam PE(2)
Al(3) foil
TC(4) braid
black LSZH(5) PE
mm
1.46
4.07
4.27
4.75
5.90
inches
0.057
0.160
0.168
0.187
0.232
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
50Ω ± 2Ω
DC - 4 GHz
90 dB (DC - 3 GHz)
3 000 V rms
3.3 kW
84 pF / m
25.5 pF / ft
79 % (4.2 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
25 mm
0.98 inch
62 g / m
0.0417 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +85 °C
-40 / +185 °F
yes (UL1581 VW1 / IEC 332-1)
yes (IEC 754-2)
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 40 °C)
GHz
dB / m
dB / ft
Watts
0.2
0.12
0.04
391
0.4
0.17
0.05
277
0.6
0.21
0.06
226
0.8
0.25
0.08
196
1.0
0.28
0.08
175
1.5
0.35
0.10
143
2.0
0.40
0.12
124
2.5
0.45
0.14
111
3.0
0.50
0.15
101
4.0
0.59
0.18
88
attenuation calculation (dB/m)
(0.264 x √f GHz) + (0.015 x f GHz)
power calculation (W)
175 / √f GHz
(1)
OFC = Oxygen Free Copper
(2)
PE = PolyEthylene
(3)
Al = Aluminum
(4)
TC = Tinned Copper
(5)
LSZH PE = Low Smoke Zero Halogen PolyEthylene
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
FLEXIBLE CABLE 6/75 S
(RG59)
(KX6A)
p/n: C291 360 000
p/n: C291 351 012
APPLICATION NOTE
APPLICATION NOTE
(MIL-C-17/29-RG59)
(NF-C-93/550-KX6)
Due to its 75 ohms characteristic impedance,
RG59 is rather dedicated to TV/Video
application.
Relevant standard: NF-C-93/550-KX6 (France)
Due to its stranded inner conductor, KX6 is
much more flexible than RG59.
Its solid inner conductor allows better
attenuation than the equivalent KX solution
(KX6).
This cable will be chosen instead of RG59 for
specific applications requiring high flexibility.
Cable assemblies
FLEXIBLE CABLE 6/75 S
Cost effective solution
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid CCS(1)
solid PE(2)
copper braid
black PVC(3)
CONSTRUCTION / DIMENSIONS
mm
0.57
3.71
4.50
6.15
inches
0.022
0.146
0.177
0.242
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
30 mm
1.18 inch
47 g / m
0.0315 lbs / ft
-40 / +85 °C
no
no
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
recommended minimum
bending radius
weight
inches
0.024
0.146
0.177
0.240
75Ω ± 3Ω
DC - 1 GHz
40 dB
7 000 V rms
2.7 kW
63 pF / m
19 pF / ft
66 % (5 ns / m)
dB / m
dB / ft
0.09
0.03
0.13
0.04
0.19
0.06
0.23
0.07
0.30
0.09
0.33
0.10
0.36
0.11
0.39
0.12
0.44
0.13
(0.40 x √f GHz) + (0.04 x f
75 / √f GHz
25 mm
0.98 inch
48 g / m
0.0320 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
-40 / +185 °F
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.05
0.1
0.2
0.3
0.5
0.6
0.7
0.8
1.0
attenuation calculation (dB/m)
power calculation (W)
mm
0.60
3.70
4.50
6.10
MECHANICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
material
stranded copper
solid PE(1)
copper braid
green PVC(2)
ELECTRICAL CHARACTERISTICS
75Ω ± 3Ω
DC - 1 GHz
40 dB
7 000 V rms
2.7 kW
60 pF / m
18.2 pF / ft
66 % (5 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
center conductor
dielectric
inner shield
outer shield
jacket
operating temperature range
fire resistance
halogen free
-40 / +85 °C
no
no
-40 / +185 °F
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
Watts
335
237
168
137
106
97
90
84
75
GHz)
CCS = Copper Covered Steel
PE = PolyEthylene
(3)
PVC = PolyVinyl Chloride
GHz
0.05
0.1
0.2
0.3
0.5
0.6
0.7
0.8
1.0
attenuation calculation (dB/m)
power calculation (W)
(1)
(1)
(2)
(2)
dB / m
dB / ft
Watts
0.10
0.03
300
0.14
0.04
212
0.20
0.06
150
0.25
0.08
122
0.33
0.10
95
0.36
0.11
86
0.40
0.12
80
0.43
0.13
75
0.48
0.15
67
(0.44 x √f GHz) + (0.04 x f GHz)
67 / √f GHz
PE = PolyEthylene
PVC = PolyVinyl Chloride
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
B-21
Cable assemblies
FLEXIBLE CABLE 6/75 D
FLEXIBLE CABLE 7/75 D
(HD 0.8/3.7 - RG59 type)
(HD 1.0/4.8 - RG6 type)
p/n: C291 360 093
p/n: C291 384 083
APPLICATION NOTE
APPLICATION NOTE
Due to its 75 ohms characteristic impedance,
this cable is rather dedicated to HDTV/Video
application.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid BC(1)
FHD PE(2)
Al(3) tape
TC(4) braid
blue PVC(5)
CONSTRUCTION / DIMENSIONS
mm
0.81
3.68
3.81
4.37
5.92
inches
0.032
0.145
0.150
0.172
0.233
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
63.5 mm
2.5 inch
46 g / m
0.031 lbs / ft
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
recommended minimum
bending radius
weight
inches
0.040
0.180
0.185
0.207
0.274
75Ω ± 1.5Ω
DC - 4.5 GHz
300 V rms
53.15 pF / m
16.2 pF / ft
82 % (4.1 ns / m)
dB / m
dB / ft
Watts
0.173
0.052
0.247
0.075
0.304
0.092
0.353
0.107
0.397
0.120
0.437
0.132
0.473
0.143
0.508
0.154
0.541
0.164
(0.24 x √f GHz) + (0.007 x f GHz)
69.85 mm
2.75 inch
59.5 g / m
0.04 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
-30 / +75 °C
-22 / +167 °F
yes (UL1666 Vertical Shaft)
no
BC = Bare Copper
FHD PE = Foam High Density PolyEthylene
(3)
Al = Aluminum
(4)
TC = Tinned Copper
(5)
PVC = PolyVinyl Chloride
mm
1.02
4.56
4.70
5.26
6.95
MECHANICAL CHARACTERISTICS
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
attenuation calculation (dB/m)
material
solid BC(1)
FHD PE(2)
Al(3) tape
TC(4) braid
blue PVC(5)
ELECTRICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
center conductor
dielectric
inner shield
outer shield
jacket
75Ω ± 1.5Ω
DC - 4.5 GHz
300 V rms
53.5 pF / m
16.3 pF / ft
83 % (4.0 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
Due to its 75 ohms characteristic impedance,
this cable is rather dedicated to HDTV/Video
application.
operating temperature range
fire resistance
halogen free
-30 / +75 °C
-22 / +167 °F
yes (UL1666 Vertical Shaft)
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
attenuation calculation (dB/m)
dB / m
dB / ft
Watts
0.134
0.040
0.193
0.058
0.240
0.073
0.281
0.085
0.318
0.096
0.352
0.107
0.384
0.116
0.414
0.125
0.443
0.134
(0.179 x √f GHz) + (0.014 x f GHz)
BC = Bare Copper
FHD PE = Foam High Density PolyEthylene
(3)
Al = Aluminum
(4)
TC = Tinned Copper
(5)
PVC = PolyVinyl Chloride
(1)
(1)
(2)
(2)
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
B-22
www.radiall.com
FLEXIBLE CABLE 10/50 D
(RG213 - KX4)
(RG393)
p/n: C291 510 000
p/n: C291 511 007
p/n: C291 510 010
APPLICATION NOTE
(MIL-C-17/74-RG213)
(MIL-C-17/174-RG393)
(NF-C-93/550-KX4)
RG393 is one of the most popular RG cables.
APPLICATION NOTE
This cable may be used for high frequency
range and severe thermal conditions
applications.
Due to its construction and raw materials
selection, RG213 is a cost effectiveness solution
in the 10 mm cable range.
This cable may be considered for low
frequencies applications that do not require
a high level of screening effectiveness.
Cost effective solution
CONSTRUCTION / DIMENSIONS
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
standed copper
solid PE(1)
copper braid
black PVC(2)
mm
2.26
7.24
8.13
10.30
inches
0.089
0.285
0.320
0.406
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
50Ω ± 2Ω
DC - 1 GHz
40 dB
10 000 V rms
6.5 kW
96 pF / m
29 pF / ft
66 % (5 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
40 mm
1.57 inch
148 g / m
0.0999 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +85 °C
no
no
PE = PolyEthylene
(2)
PVC = PolyVinyl Chloride
(1)
center conductor
dielectric
inner shield
outer shield
jacket
dB / m
dB / ft
0.05
0.01
0.07
0.02
0.10
0.03
0.12
0.04
0.16
0.05
0.18
0.05
0.20
0.06
0.21
0.06
0.24
0.07
(0.20 x √f GHz) + (0.04 x f
180 / √f GHz
material
stranded SPC(1)
solid PTFE(2)
SPC(1) braid
SPC(1) braid
brown FEP(3)
mm
2.39
7.24
8.90
9.91
inches
0.094
0.285
0.350
0.390
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
50Ω ± 2Ω
DC - 11 GHz
65 dB (DC - 3 GHz)
10 000 V rms
8.3 kW
96 pF / m
29 pF / ft
70 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
40 mm
1.57 inch
235 g / m
0.1567 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +185 °F
-55 / +200 °C
-67 / +392 °F
yes (CSA FT6 / IEC 332-2)
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.05
0.1
0.2
0.3
0.5
0.6
0.7
0.8
1.0
attenuation calculation (dB/m)
power calculation (W)
Cable assemblies
FLEXIBLE CABLE 10/50 S
GHz
0.5
1.0
1.5
2.0
3.0
6.0
8.0
10.0
11.0
attenuation calculation (dB/m)
power calculation (W)
Watts
805
569
402
329
255
232
215
201
180
GHz)
dB / m
dB / ft
0.15
0.05
0.23
0.07
0.29
0.09
0.35
0.11
0.45
0.14
0.71
0.21
0.86
0.26
1.00
0.30
1.07
0.32
(0.19 x √f GHz) + (0.04 x f
900 / √f GHz
Watts
1 273
900
735
636
520
367
318
285
271
GHz)
SPC = Silver Plated Copper
PTFE = PolyTetraFluoroEthylene
(3)
FEP = Fluorinated Ethylene Propylene
(1)
(2)
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
B-23
Cable assemblies
LOW LOSS FLEXIBLE CABLE
10/50 D (ECO393: alternative to RG393)
LOW LOSS FLEXIBLE CABLE
10/50 D (ECO393X)
p/n: C291 491 060
p/n: C291 512 020
APPLICATION NOTE
APPLICATION NOTE
Designed by RADIALL, ECO393 is an
advantageous alternative solution to RG393:
Designed by RADIALL, ECO393X is an
advantageous alternative solution to ECO393
when higher power level is required:
• Advantageous in term of electrical performance:
the crosslink foam polyethylene used as
dielectric material allows higher temperature
level (thus power range) than ECO393.
• Advantageous in term of environmental
aspect: halogen and sulphur free, this cable
does not emit any toxic substance when
submitted to fire. The flame retardant jacket
allows ECO393X to meet fire resistance
standards.
• Advantageous in term of price: ECO393X
design has integrated all RADIALL knowledge
to reach the best performances with a very
competitive price.
ECO393X is UL style 3651 approved.
This cable is compatible with a large range
of standard connector series.
• Advantageous in term of electrical
performance: its optimized construction allows
better attenuation and screening effectiveness
than RG393
• Advantageous in term of environmental
aspect: halogen and sulphur free, this cable
does not emit any toxic substance when
submitted to fire.
The flame retardant jacket allows ECO393 to
meet fire resistance standards.
ECO-Friendly cable
Cost effective solution
• Advantageous in term of price: ECO393
design has integrated all RADIALL knowledge
to reach the best performance with a very
competitive price.
ECO393 is UL style 1375 approved.
ECO-Friendly cable
Cost effective solution
This cable is compatible with a large range of
connector series.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid OFC(1)
foam PE(2)
Al(3) foil
TC(4) braid
black LSZH PE(5)
CONSTRUCTION / DIMENSIONS
mm
2.40
7.25
7.35
7.85
9.10
inches
0.094
0.285
0.289
0.309
0.358
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
40 mm
1.57 inch
130 g / m
0.0875 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +85 °C
-40 / +185 °F
yes (UL1581 VW1 / IEC 332-1)
yes (IEC 754-2)
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
dB / m
dB / ft
Watts
0.1
0.05
0.01
1 265
0.2
0.07
0.02
894
0.3
0.08
0.03
730
0.5
0.11
0.03
566
1.0
0.16
0.05
400
1.5
0.20
0.06
327
2.0
0.24
0.07
283
2.5
0.27
0.08
253
3.0
0.30
0.09
231
attenuation calculation (dB/m)
(0.14 x √f GHz) + (0.02 x f GHz)
power calculation (W)
400 / √f GHz
(1)
OFC = Oxygen Free Copper
(2)
PE = PolyEthylene
(3)
Al = Aluminum
(4)
TC = Tinned Copper
(5)
LSZH PE = Low Smoke Zero Halogen PolyEthylene
B-24
material
stranded SPC(1)
X foam PE(2)
SPC(1) braid
SPC(1) braid
black LSZH PE(3)
mm
2.35
7.20
7.89
8.57
10.00
inches
0.093
0.283
0.311
0.337
0.394
ELECTRICAL CHARACTERISTICS
50Ω ± 2Ω
DC - 3 GHz
80 dB (DC - 3 GHz)
10 000 V rms
6.6 kW
88 pF / m
26.6 pF / ft
75 % (4.4 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
center conductor
dielectric
inner shield
outer shield
jacket
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
capacitance
velocity of propagation
50Ω ± 2Ω
DC - 6 GHz
78 dB (DC - 3 GHz)
5 000 V rms
94 pF / m
28.1 pF / ft
71 % (4.7 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
50 mm
1.97 inch
180 g / m
0.120 Ibs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +105 °C
-40 / +221 °F
yes (UL1581 VW1)
yes (IEC 754-2)
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5.0
6.0
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
0.18
0.05
0.29
0.09
0.38
0.12
0.47
0.14
0.56
0.17
0.64
0.19
0.72
0.22
0.80
0.24
0.96
0.29
1.11
0.34
(0.17 x √f GHz) + (0.115 x f
490 / √f GHz
Watts
693
490
400
346
310
283
262
245
219
200
GHz)
SPC = Silver Plated Copper
X foam PE = Crosslink foam PolyEthylene
(3)
LSZH PE = Low Smoke Zero Halogen PolyEthylene
(1)
(2)
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
FLEXIBLE CABLE 11/50 D
(RG214 - KX13)
p/n: C291 516 070
p/n: C291 600 000
(MIL-C-17/75-RG214)
APPLICATION NOTE
p/n: C291 600 010
This LMR400 type cable can be considered
as an alternative to equivalent diameter
corrugated cables.
(NF-C-93/550-KX13)
APPLICATION NOTE
The main advantage is greater flexibility and
bendability allowing easy routing during the
installation.
RG214 is one of the most popular RG cables.
For economical reasons and when thermal
conditions allow it, this cable may be used
instead of RG393.
The foam dielectric provides excellent loss
and low return loss levels.
The double screen construction (Aluminum
foil + tinned copper braid) offers a high level
of shielding as well as low leakage.
This cable will be advised for feeder and
jumper assemblies in cellular networks
as well as applications requiring easy routing.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid AICC(1)
foam PE(2)
Al(3) foil
TC(4) braid
black PE(2)
mm
2.74
7.24
7.39
8.13
10.29
inches
0.108
0.285
0.291
0.320
0.405
50Ω ± 2Ω
16.2 GHz
DC - 6 GHz
> 90 dB
2 500 V DC
16 kW
78.4 pF / m
23.9 pF / ft
85 % (3.9 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
25.4 mm
1.00 inch
100 g / m
0.068 lbs / ft
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
-40 / +85 °C
no
no
-40 / +185 °F
FREQUENCY / ATTENUATION (typ.) /
CW TYP POWER (sea level / 40 °C)
GHz
0.1
0.5
1.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
attenuation calculation (dB/m)
dB / m
dB / ft
Watts
0.04
0.01
1 810
0.09
0.03
790
0.14
0.04
540
0.17
0.05
440
0.20
0.06
370
0.22
0.07
335
0.25
0.07
300
0.29
0.09
250
0.33
0.10
220
0.37
0.11
200
(0.127 x √f GHz) + (0.009 x f GHz)
AlCC = Aluminum Covered Copper
PE = PolyEthylene
(3)
Al = Aluminum
(4)
TC = Tinned Copper
(1)
mm
2.25
7.24
8.89
10.80
inches
0.089
0.285
0.350
0.425
50Ω ± 2Ω
DC - 11 GHz
65 dB (DC - 3 GHz)
10 000 V rms
6.5 kW
96 pF / m
29 pF / ft
66 % (5 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
40 mm
1.57 inch
174 g / m
0.1170 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
material
standed SPC(1)
solid PE(2)
SPC(1) braid
SPC(1) braid
black PVC(3)
ELECTRICAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
characteristic impedance
cut-off frequency
recommend. operat. freq. range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
Cable assemblies
LOW LOSS FLEXIBLE CABLE
10.3/50 D (LMR400 type)
-40 / +85 °C
no
no
-40 / +185 °F
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.5
1.0
1.5
2.0
3.0
6.0
8.0
10.0
11.0
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
0.16
0.05
0.24
0.07
0.30
0.09
0.36
0.11
0.47
0.14
0.73
0.22
0.89
0.27
1.03
0.31
1.10
0.33
(0.20 x √f GHz) + (0.04 x F
180 / √f GHz
Watts
255
180
147
127
104
73
64
57
54
GHz)
SPC = Silver Plated Copper
PE = PolyEthylene
(3)
PVC = PolyVinyl Chloride
(1)
(2)
(2)
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
B-25
Cable assemblies
FLEXIBLE CABLE 11/75 D
LOW LOSS FLEXIBLE CABLE
15.2/50 D (LMR600 type)
(RG216)
p/n: C291 610 000
p/n: C291 626 070
(MIL-C-17/77-RG216)
APPLICATION NOTE
This LMR600 cable can be considered as an
alternative to equivalent diameter corrugated
cables.
APPLICATION NOTE
Due to its 75 ohms characteristic impedance,
RG 216 is rather dedicated to TV/Video
application.
The main advantage is greater flexibility and
bendability allowing easy routing during the
installation.
The foam dielectric provides excellent loss and
low return loss levels.
The double screen construction (Aluminum foil
+ tinned copper braid) offers a high level of
shielding as well as low leakage.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
stranded TC(1)
solid PE(2)
copper braid
copper braid
black PVC(3)
mm
1.21
7.24
8.89
10.80
inches
0.048
0.285
0.350
0.425
This cable will be advised for feeder and jumper
assemblies in cellular networks as well as
applications requiring easy routing.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
75Ω ± 3Ω
DC - 3 GHz
65 dB
10 000 V rms
5.3 kW
66 pF / m
20 pF / ft
66 % (5 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
50 mm
1.97 inch
165 g / m
0.1104 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +85 °C
no
no
-40 / +185 °F
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
0.1
0.2
0.3
0.5
1.0
1.5
2.0
2.5
3.0
attenuation calculation (dB/m)
power calculation (W)
TC = Tinned Copper
PE = PolyEthylene
(3)
PVC = PolyVinyl Chloride
(1)
(2)
dB / m
dB / ft
0.09
0.03
0.13
0.04
0.17
0.05
0.22
0.07
0.32
0.10
0.40
0.12
0.48
0.14
0.54
0.16
0.60
0.18
(0.28 x √f GHz) + (0.04 x f
125 / √f GHz
Watts
395
280
228
177
125
102
88
79
72
GHz)
material
solid AlCC(1)
foam PE(2)
Al(3) foil
TC(4) braid
black PE(2)
mm
4.47
11.56
11.71
12.45
14.99
inches
0.176
0.455
0.461
0.490
0.590
ELECTRICAL CHARACTERISTICS
characteristic impedance
cut-off frequency
recommend. operat. freq. range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
50Ω ± 2Ω
10.3 GHz
DC - 6 GHz
> 90 dB
4 000 V DC
40 kW
76.6 pF / m
23.4 pF / ft
87 % (3.8 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
38.1 mm
1.50 inch
200 g / m
0.131 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +85 °C
no
no
-40 / +185 °F
FREQUENCY / ATTENUATION (typ.) /
CW TYP POWER (sea level / 40 °C)
GHz
0.1
0.5
1.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
attenuation calculation (dB/m)
dB / m
dB / ft
0.03
0.008
0.06
0.018
0.09
0.026
0.11
0.033
0.13
0.039
0.15
0.044
0.16
0.049
0.19
0.058
0.22
0.066
0.25
0.074
(0.078 x √f GHz) + (0.009 x
Watts
2 970
1 270
870
700
590
530
470
400
350
310
f GHz)
AICC = Aluminum Covered Copper
PE = PolyEthylene
(3)
Al = Aluminum
(4)
TC = Tinned Copper
(1)
(2)
B-26
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
CORRUGATED CABLE 3/8"
(Cellflex 1/4" Spiral)
(Cellflex 3/8" Spiral)
p/n: C291 993 170
p/n: C291 996 170
(Cellflex HCF 1/4" - 50 AlCu)
(Cellflex HCF 3/8" CuH-50 AlCu)
APPLICATION NOTE
APPLICATION NOTE
The outer conductor of this cable is
constituted of a corrugated tube (spiral
winding).
The outer conductor of this cable is constituted
of a corrugated tube (spiral winding).
This construction allows perfect shielding and
bendability while respecting large bending
radius.
This construction allows perfect shielding and
bendability while respecting large bending
radius.
The foam dielectric provides excellent loss and
low return loss levels.
The foam dielectric provides excellent loss and
low return loss levels.
This cable will be advised for feeder and
jumper assemblies in cellular networks as well
as applications requiring high performance
level on long distances.
This cable will be advised for feeder and
jumper assemblies in cellular networks as well
as applications requiring high performance
level on long distances.
The anti-UV LSZH (Low Smoke Zero Hallogen)
material is also flame retardant and allows
this cable to be used for indoor public areas
as well as outoor installations.
The anti-UV LSZH (Low Smoke Zero Hallogen)
material is also flame retardant and allows
this cable to be used for indoor public areas
as well as outoor installations.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
corrugated inner shield
outer shield
jacket
material
solid AlCC(1)
foam PE(2)
spiral copper tube
black LSZH PE(3)
CONSTRUCTION / DIMENSIONS
mm
1.90
4.30
6.50
7.80
inches
0.075
0.169
0.256
0.307
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
material
solid AlCC(1)
foam PE(2)
spiral copper tube
black LSZH PE(3)
mm
2.60
6.30
9.10
10.20
inches
0.102
0.248
0.358
0.402
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
25.0 mm
0.984 inch
70 g / m
0.047 lb / ft
recommended minimum
bending radius
weight
25.0 mm
0.984 inch
120 g / m
0.080 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
-40 / +85 °C
-40 / +185 °F
yes (UL 1581 VW1 / IEC 332-1)
yes (IEC 754-2)
FREQUENCY / ATTENUATION (typ. / 25 °C) /
CW MAX POWER (sea level / 40 °C)
GHz
dB / m
dB / ft
1.0
0.19
0.06
2.0
0.27
0.08
3.0
0.34
0.10
4.0
0.40
0.12
6.0
0.51
0.15
8.0
0.60
0.18
10.0
0.69
0.21
12.4
0.78
0.24
18.0
0.99
0.30
20.0
1.06
0.32
attenuation calculation (dB/m)
(0.17 x √f GHz) + (0.015 x f
(1)
AlCC = Aluminum Covered Copper
(2)
PE = PolyEthylene
(3)
LSZH PE = Low Smoke Zero Hallogen PolyEthylene
50Ω ± 1Ω
DC - 13.4 GHz
110 dB
4 500 V rms
11.9 kW
82 pF / m
24.8 pF / ft
82 % (4.1 ns / m)
MECHANICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
center conductor
dielectric
corrugated inner shield
outer shield
jacket
50Ω ± 1Ω
DC - 20.4 GHz
110 dB
3 100 V rms
5.5 kW
82 pF / m
24.8 pF / ft
82 % (4.1 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
Cable assemblies
CORRUGATED CABLE 1/4"
operating temperature range
fire resistance
halogen free
-40 / +85 °C
-40 / +185 °F
yes (UL 1581 VW1 / IEC 332-1)
yes (IEC 754-2)
FREQUENCY / ATTENUATION (typ. / 25 °C) /
CW MAX POWER (sea level / 40 °C)
Watts
339
232
185
156
124
104
91
79
63
59
GHz)
GHz
0.5
1.0
1.5
2.0
3.0
4.0
6.0
8.0
10.0
12.4
attenuation calculation (dB/m)
dB / m
dB / ft
0.09
0.03
0.13
0.04
0.17
0.05
0.19
0.06
0.24
0.07
0.29
0.09
0.36
0.11
0.43
0.13
0.49
0.15
0.56
0.17
(0.123 x √f GHz) + (0.01 x f
Watts
810
560
449
384
306
260
205
173
152
133
GHz)
AlCC = Aluminum Covered Copper
PE = PolyEthylene
(3)
LSZH PE = Low Smoke Zero Hallogen PolyEthylene
(1)
(2)
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
B-27
Cable assemblies
CORRUGATED CABLE 1/2"
SEMI-RIGID CABLE .047
(Cellflex 1/2" Spiral)
(Copper)
p/n: C291 994 170
p/n: C291 855 001
APPLICATION NOTE
APPLICATION NOTE
(Cellflex HCF 1/2" CuH-50 AlCu)
(MIL-C-17/151-00001)
The outer conductor of this cable is constituted
of a corrugated tube (spiral winding).
This is the smallest semi-rigid cable size
proposed by RADIALL.
This construction allows perfect shielding and
bendability while respecting large bending radius.
Its reduced size allows it to be easily
handformable during integration operations.
The foam dielectric provides excellent loss and
low return loss levels.
This cable will be advised for feeder and jumper
assemblies in cellular networks as well as
applications requiring high performance level
on long distances.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
The anti-UV LSZH (Low Smoke Zero Hallogen)
material is also flame retardant and allows this
cable to be used for indoor public areas as well
as outoor installations.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
corrugated inner shield
outer shield
jacket
material
solid AlCC(1)
foam PE(2)
spiral copper tube
black LSZH PE(3)
mm
3.60
8.30
12.30
13.50
inches
0.142
0.327
0.484
0.531
50Ω ± 1Ω
DC - 11.7 GHz
110 dB
5 845 V rms
20.5 kW
82 pF / m
24.8 pF / ft
82 % (4.1 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
32.0 mm
1.260 inch
210 g / m
0.140 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +85 °C
-40 / +185 °F
yes (UL 1581 VW1 / IEC 332-1)
yes (IEC 754-2)
FREQUENCY / ATTENUATION (typ. / 25 °C) /
CW MAX POWER (sea level / 40 °C)
GHz
dB / m
dB / ft
Watts
0.5
0.08
0.02
1 120
1.0
0.11
0.03
770
1.5
0.14
0.04
616
2.0
0.16
0.05
525
2.5
0.18
0.06
461
3.0
0.20
0.06
417
4.0
0.24
0.07
353
6.0
0.30
0.09
278
8.0
0.36
0.11
234
10.0
0.42
0.13
204
attenuation calculation (dB/m)
(0.10 x √f GHz) + (0.01 x f GHz)
(1)
AlCC = Aluminum Covered Copper
(2)
PE = PolyEthylene
(3)
LSZH PE = Low Smoke Zero Hallogen PolyEthylene
B-28
mm
0.29
0.94
1.19
-
inches
0.011
0.037
0.047
-
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
material
solid SPCCS(1)
solid PTFE(2)
copper tubing
-
50Ω ± 2.5Ω
DC - 20 GHz
110 dB
2 000 V rms
1.1 kW
100 pF / m
30 pF / ft
70 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
3.17 mm
0.125 inch
6.0 g / m
0.0040 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +100 °C
-40 / +212 °F
not applicable
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
(1)
(2)
dB / m
dB / ft
Watts
1.14
0.35
30
1.64
0.50
21
2.03
0.61
17
2.93
0.89
12
3.43
1.04
11
3.88
1.18
9.5
4.37
1.32
8.5
5.39
1.63
7.1
5.72
1.73
6.7
(1.10 x √f GHz) + (0.04 x f GHz)
30 / √f GHz
SPCCS = Silver Plated Copper Covered Steel
PTFE = PolyTetraFluoroEthylene
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
HAND-FORMABLE CABLE
.085 (unjacketed)
(Tinned copper)
p/n: C291 855 065
p/n: C291 844 065
(MIL-C-17/151-00002 type)
APPLICATION NOTE
APPLICATION NOTE
This handformable cable is a good alternative
to RG405 for applications requiring an easy
routing on equipment.
This is the smallest semi-rigid cable size
proposed by RADIALL.
Its reduced size allows it to be easily
handformable during integration operations.
Due to the outer conductor coating (tin), this
cable will be used instead of standard .047
copper for applications requiring high corrosion
resistance and improved solderability.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid SPCCS(1)
solid PTFE(2)
TC(3) tubing
-
mm
0.29
0.94
1.19
-
inches
0.011
0.037
0.047
-
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
50Ω ± 2.5Ω
DC - 20 GHz
110 dB
2 000 V rms
1.1 kW
100 pF / m
30 pF / ft
70 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
3.17 mm
0.125 inch
6.0 g / m
0.0040 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +100 °C
-40 / +212 °F
not applicable
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
Watts
1.14
0.35
30
1.64
0.50
21
2.03
0.61
17
2.93
0.89
12
3.43
1.04
11
3.88
1.18
9.5
4.37
1.32
8.5
5.39
1.63
7.1
5.72
1.73
6.7
(1.10 x √f GHz) + (0.04 x f GHz)
30 / √f GHz
SPCCS = Silver Plated Copper Covered Steel
PTFE = PolyTetraFluoroEthylene
(3)
TC = Tinned Copper
(1)
(2)
Due to the outer conductor construction, this
cable can be hand formed with exceptional
ease with no spring back effect.
Cable can be reshaped, eliminating the need
for costly drawings.
Attenuation is a little bit higher than the
RG405's one but temperature range is wider.
Cable assemblies
SEMI-RIGID CABLE .047
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid SPCCS(1)
solid PTFE(2)
copper foil
TS(3) braid
-
mm
0.51
1.63
2.21
-
inches
0.020
0.064
0.087
-
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
50Ω ± 2Ω
DC - 20 GHz
90 dB
5 000 V rms
1.9 kW
97.5 pF / m
29.5 pF / ft
70 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
3.2(4) / 9.5(5) mm
0.125(4) / 0.375(5) inch
17.8 g / m
0.0119 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-65 / +150 °C
-85 / +302 °F
not applicable
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
Watts
0.67
0.20
100
0.97
0.29
71
1.21
0.37
58
1.78
0.54
41
2.10
0.64
35
2.39
0.72
32
2.71
0.82
28
3.39
1.03
24
3.62
1.10
22
(0.63 x √f GHz) + (0.04 x f GHz)
100 / √f GHz
SPCCS = Silver Plated Copper Covered Steel
PTFE = PolyTetraFluoroEthylene
(3)
TS = Tin Soaked
(4)
one time
(5)
repeated
(1)
(2)
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
B-29
Cable assemblies
SEMI-RIGID CABLE .085
SEMI-RIGID CABLE .085
(RG405 - KS1)
(Tinned copper)
p/n: C291 850 001
(MIL-C-17/133-00007)
APPLICATION NOTE
APPLICATION NOTE
Due to the outer conductor coating (tin),
this cable will be used instead of RG405
for applications requiring high corrosion
resistance and improved solderability.
RG405 is one of the most popular semi-rigid
RG cables.
RG405 will be prefered to flexible RG316
or RD316 for applications requiring high
frequency range, low attenuation, high
screening effectiveness, very small
bending radius and/or no spring back effect.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid SPCCS(1)
solid PTFE(2)
copper tubing
-
CONSTRUCTION / DIMENSIONS
mm
0.51
1.68
2.20
-
inches
0.020
0.066
0.087
-
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
recommended minimum
bending radius
weight
3.17 mm
0.125 inch
20.0 g / m
0.0135 lbs / ft
(1)
(2)
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
dB / m
dB / ft
Watts
0.65
0.20
100
0.94
0.29
71
1.18
0.36
58
1.73
0.53
41
2.05
0.62
35
2.33
0.71
32
2.64
0.80
28
3.31
1.00
24
3.53
1.07
22
(0.61 x √f GHz) + (0.04 x f GHz)
100 / √f GHz
SPCCS = Silver Plated Copper Covered Steel
PTFE = PolyTetraFluoroEthylene
mm
0.51
1.68
2.20
-
inches
0.020
0.066
0.087
-
50Ω ± 1.5Ω
DC - 20 GHz
110 dB
5 000 V DC
1.9 kW
100 pF / m
30 pF / ft
70 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
3.17 mm
0.125 inch
20.0 g / m
0.0135 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
-40 / +125 °C
-40 / +257 °F
not applicable
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
material
solid SPCCS(1)
solid PTFE(2)
TPC(3)
-
ELECTRICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
center conductor
dielectric
inner shield
outer shield
jacket
50Ω ± 1.5Ω
DC - 20 GHz
110 dB
5 000 V rms
1.9 kW
100 pF / m
30 pF / ft
70 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
B-30
p/n: C291 850 005
(MIL-C-17/133-RG405)
(NF-C-93/551-KS1)
operating temperature range
fire resistance
halogen free
-40 / +125 °C
-40 / +257 °F
not applicable
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
Watts
0.65
0.20
100
0.94
0.29
71
1.18
0.36
58
1.73
0.53
41
2.05
0.62
35
2.33
0.71
32
2.64
0.80
28
3.31
1.00
24
3.53
1.07
22
(0.61 x √f GHz) + (0.04 x f GHz)
100 / √f GHz
SPCCS = Silver Plated Copper Covered Steel
PTFE = PolyTetraFluoroEthylene
(3)
TPC = Tin Plated Copper
(1)
(2)
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
SEMI-RIGID CABLE .085
(Non magnetic)
(Aluminum)
p/n: C291 851 001
p/n: C291 844 187
(MIL-C-17/133-00008)
(MIL-C-17/133-00013)
APPLICATION NOTE
APPLICATION NOTE
Based on RG405 standard, this cable will
be selected for application requiring easy
conformability and/or application requiring
reduced weight.
Due to the aluminum outer conductor, this
cable can be hand formed with exceptional
ease with no spring back effect.
Cable can be reshaped, eliminating the need
for costly drawings.
The outer conductor material (aluminum)
slightly increases the attenuation compared
to standard RG405.
Based on RG405 standard, this cable is used
where non magnetic aspect is required.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid SPC(1)
solid PTFE(2)
copper tubing
-
mm
0.51
1.68
2.20
-
inches
0.020
0.066
0.087
-
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
50Ω ± 1.5Ω
DC - 20 GHz
110 dB
5 000 V rms
1.9 kW
100 pF / m
30 pF / ft
70 % (4.8 ns / m)
3.17 mm
0.125 inch
20.0 g / m
0.0135 lbs / ft
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
-40 / +125 °C
-40 / +257 °F
not applicable
no
recommended minimum
bending radius
weight
operating temperature range
fire resistance
halogen free
(1)
(2)
dB / m
dB / ft
Watts
0.65
0.20
100
0.94
0.29
71
1.18
0.36
58
1.73
0.53
41
2.05
0.62
35
2.33
0.71
32
2.64
0.80
28
3.31
1.00
24
3.53
1.07
22
(0.61 x √f GHz) + (0.04 x f GHz)
100 / √f GHz
inches
0.020
0.066
0.087
-
50Ω ± 1Ω
DC - 20 GHz
110 dB
5 000 V rms
1.9 kW
100 pF / m
30 pF / ft
70 % (4.8 ns / m)
1.8 mm
0.07 inch
10.7 g / m
0.0072 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
mm
0.51
1.68
2.20
-
MECHANICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
material
solid SPCCS(1)
solid PTFE(2)
TPAI(2) tubing
-
ELECTRICAL CHARACTERISTICS
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
Cable assemblies
SEMI-RIGID CABLE .085
-40 / +125 °C
-40 / +257 °F
not applicable
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
SPC = Silver Plated Copper
PTFE = PolyTetraFluoroEthylene
dB / m
dB / ft
Watts
0.68
0.20
100
0.98
0.30
71
1.22
0.37
58
1.80
0.54
41
2.12
0.64
35
2.41
0.73
32
2.73
0.83
28
3.41
1.03
24
3.64
1.10
22
(0.635 x √f GHz) + (0.04 x f GHz)
100 / √f GHz
SPCCS = Silver Plated Copper Covered Steel
PTFE = PolyTetraFluoroEthylene
(3)
TPAl = Tin Plated Aluminum
(1)
(2)
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
B-31
Cable assemblies
HAND-FORMABLE CABLE
.141 (Unjacketed)
HAND-FORMABLE CABLE
.141 (Jacketed)
p/n: C291 864 065
p/n: C291 866 378
APPLICATION NOTE
APPLICATION NOTE
This handformable cable is a good alternative
to RG402 for applications requiring an easy
routing on equipment.
Due to the outer conductor construction, this
cable can be hand formed with exceptional
ease with no spring back effect.
Cable can be reshaped, eliminating the need
for costly drawings.
Attenuation is a little bit higher than the
RG402's one but temperature range is wider.
This jacketed cable will be used instead
of standard unjacketed .141 for applications
requiring electrical insulation and/or
protection against environmental aggressions
(chemical, humidity...).
The FEP jacket allows this cable to be used
under severe thermal conditions.
The jacket makes the spring back effect
slightly increasing.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid SPCCS(1)
solid PTFE(2)
copper tape
TS(3) braid
-
mm
0.92
2.95
3.50
-
inches
0.036
0.116
0.138
-
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
50Ω ± 2Ω
DC - 20 GHz
90 dB
5 000 V rms
3.4 kW
97.5 pF / m
29.5 pF / ft
70 % (4.8 ns / m)
6.4(4) / 19(5) mm
0.25(4) / 0.75(5) inch
33 g / m
0.0221 lbs / ft
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
-65 / +150 °C
-85 / +302 °F
not applicable
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
Watts
0.39
0.12
315
0.57
0.17
223
0.72
0.22
182
1.09
0.33
129
1.30
0.39
111
1.49
0.45
100
1.71
0.52
89
2.18
0.66
74
2.34
0.71
70
(0.345 x √f GHz) + (0.04 x f GHz)
315 / √f GHz
SPCCS = Silver Plated Copper Covered Steel
PTFE = PolyTetraFluoroEthylene
(3)
TS = Tin Soaked
(4)
one time
(5)
repeated
(1)
(2)
B-32
inches
0.036
0.117
0.138
0.159
50Ω ± 2Ω
DC - 20 GHz
90 dB
5 000 V rms
3.4 kW
97.5 pF / m
29.5 pF / ft
70 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
mm
0.92
2.98
3.50
4.05
ELECTRICAL CHARACTERISTICS
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
material
solid SPC(1)
solid PTFE(2)
TS(3) braid
black FEP(4)
11(5) / 33(6) mm
0.43(5) / 1.3(6) inch
38 g / m
0.0254 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-65 / +150 °C
-85 / +302 °F
yes (CSA FT6 / IEC 332-2)
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
Watts
0.43
0.13
315
0.63
0.19
223
0.80
0.24
182
1.20
0.36
129
1.42
0.43
111
1.63
0.49
100
1.87
0.57
89
2.37
0.72
74
2.54
0.77
70
(0.390 x √f GHz) + (0.04 x f GHz)
315 / √f GHz
SPC = Silver Plated Copper
PTFE = PolyTetraFluoroEthylene
(3)
TS = Tin Soaked
(4)
FEP = Fluorinated Ethylene Propylene
(5)
one time
(6)
repeated
(1)
(2)
: Service+ program = fast delivery
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
SEMI-RIGID CABLE .141
(RG402 - KS2)
(Tinned copper)
p/n: C291 860 001
p/n: C291 862 005
APPLICATION NOTE
APPLICATION NOTE
(MIL-C-17/130-RG402)
(NF-C-93/551-KS2)
(MIL-C-17/130-00005)
Due to the outer conductor coating (tin),
this cable will be used instead of RG402
for applications requiring high corrosion
resistance and improved solderability.
RG402 is one of the most popular semi-rigid
RG cables.
RG402 will be prefered to flexible RG142 for
applications requiring high frequency range,
low attenuation, high screening effectiveness,
very small bending radius and/or no spring
back effect.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid SPCCS(1)
solid PTFE(2)
copper tubing
-
CONSTRUCTION / DIMENSIONS
mm
0.92
2.98
3.58
-
inches
0.036
0.117
0.141
-
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
(1)
(2)
6.35 mm
0.250 inch
46 g / m
0.0309 lbs / ft
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
recommended minimum
bending radius
weight
inches
0.036
0.117
0.141
-
dB / m
dB / ft
0.34
0.10
0.50
0.15
0.64
0.19
0.97
0.30
1.17
0.35
1.35
0.41
1.55
0.47
1.99
0.60
2.14
0.65
(0.30 x √f GHz) + (0.04 x f
315 / √f GHz
50Ω ± 1Ω
DC - 20 GHz
110 dB
5 000 V rms
3.4 kW
89 pF / m
27 pF / ft
70 % (4.8 ns / m)
1.90 mm
0.075 inch
46 g / m
0.0309 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
-40 / +125 °C
-40 / +257 °F
not applicable
no
SPCCS = Silver Plated Copper Covered Steel
PTFE = PolyTetraFluoroEthylene
mm
0.92
2.98
3.58
-
MECHANICAL CHARACTERISTICS
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
material
solid SPCCS(1)
solid PTFE(2)
TPC(3)
-
ELECTRICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
center conductor
dielectric
inner shield
outer shield
jacket
50Ω ± 1Ω
DC - 20 GHz
110 dB
5 000 V rms
3.4 kW
89 pF / m
27 pF / ft
70 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
This cable is also an economical alternative
solution to .141 silvered copper.
Cable assemblies
SEMI-RIGID CABLE .141
operating temperature range
fire resistance
halogen free
-40 / +125 °C
-40 / +257 °F
not applicable
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
Watts
315
223
182
129
111
100
89
74
70
GHz)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
0.34
0.10
0.50
0.15
0.64
0.19
0.97
0.30
1.17
0.35
1.35
0.41
1.55
0.47
1.99
0.60
2.14
0.65
(0.30 x √f GHz) + (0.04 x f
315 / √f GHz
Watts
315
223
182
129
111
100
89
74
70
GHz)
SPCCS = Silver Plated Copper Covered Steel
PTFE = PolyTetraFluoroEthylene
(3)
TPC = Tin Plated Copper
(1)
(2)
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
B-33
Cable assemblies
SEMI-RIGID CABLE .141
SEMI-RIGID CABLE .141
(Silvered copper)
(Non magnetic)
p/n: c291 861 066
p/n: c291 861 061
APPLICATION NOTE
APPLICATION NOTE
Based on RG402 standard, this cable is used
where non magnetic aspect is required.
Based on RG402 standard, this cable is used
where non magnetic aspect is required.
In addition, due to the outer conductor
coating (silver), this cable will be used
instead of RG402 for applications requiring
high corrosion resistance and improved
solderability.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid SPC(1)
solid PTFE(2)
SPC(1) tubing
-
CONSTRUCTION / DIMENSIONS
mm
0.92
2.98
3.58
-
inches
0.036
0.117
0.141
-
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
recommended minimum
bending radius
weight
1.90 mm
0.075 inch
46 g / m
0.0309 lbs / ft
(2)
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
dB / m
dB / ft
0.34
0.10
0.50
0.15
0.64
0.19
0.97
0.30
1.17
0.35
1.35
0.41
1.55
0.47
1.99
0.60
2.14
0.65
(0.30 x √f GHz) + (0.04 x f
315 / √f GHz
SPC = Silver Plated Copper
PTFE = PolyTetraFluoroEthylene
inches
0.036
0.117
0.141
-
50Ω ± 1Ω
DC - 20 GHz
110 dB
5 000 V rms
3.4 kW
89 pF / m
27 pF / ft
70 % (4.8 ns / m)
recommended minimum
bending radius
weight
2.54 mm
0.100 inch
46 g / m
0.0309 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
-40 / +125 °C
-40 / +257 °F
not applicable
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
(1)
mm
0.92
2.98
3.58
-
MECHANICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
material
solid SPC(1)
solid PTFE(2)
copper tubing
-
ELECTRICAL CHARACTERISTICS
50Ω ± 1Ω
DC - 20 GHz
110 dB
5 000 V rms
3.4 kW
89 pF / m
27 pF / ft
70 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
center conductor
dielectric
inner shield
outer shield
jacket
Watts
315
223
182
129
111
100
89
74
70
GHz)
operating temperature range
fire resistance
halogen free
-40 / +125 °C
-40 / +257 °F
not applicable
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
(1)
(2)
dB / m
dB / ft
0.34
0.10
0.50
0.15
0.64
0.19
0.97
0.30
1.17
0.35
1.35
0.41
1.55
0.47
1.99
0.60
2.14
0.65
(0.30 x √f GHz) + (0.04 x f
315 / √f GHz
Watts
315
223
182
129
111
100
89
74
70
GHz)
SPC = Silver Plated Copper
PTFE = PolyTetraFluoroEthylene
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
B-34
www.radiall.com
SEMI-RIGID CABLE .250
(Aluminum)
(RG401 - KS3)
p/n: C291 864 187
p/n: C291 870 001
(MIL-C-17/130-00009)
(MIL-C-17/129-RG401)
(NF-C-93/551-KS3)
APPLICATION NOTE
Based on RG402 standard, this cable will
be selected for application requiring easy
conformability and/or application requiring
reduced weight.
Due to the aluminum outer conductor, this
cable can be hand formed with exceptional
ease with no spring back effect.
Cable can be reshaped, eliminating the need
for costly drawings. The outer conductor
material (aluminum) slightly increases the
attenuation compared to standard RG402.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid SPCCS(1)
solid PTFE(2)
TPAl(3)
-
mm
1.63
5.31
6.35
-
inches
0.064
0.209
0.250
-
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
0.125 inch
30 g / m
0.0185 lbs / ft
recommended minimum
bending radius
weight
9.53 mm
0.375 inch
140 g / m
0.0945 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
-40 / +125 °C
-40 / +257 °F
not applicable
no
dB / m
dB / ft
0.36
0.11
0.53
0.16
0.67
0.20
1.02
0.31
1.23
0.37
1.41
0.43
1.62
0.49
2.08
0.63
2.23
0.68
(0.32 x √f GHz) + (0.04 x f
315 / √f GHz
50Ω ± 0.5Ω
DC - 18 GHz
110 dB
7 500 V rms
6.1 kW
89 pF / m
27 pF / ft
70 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
3.17 mm
SPCCS = Silver Plated Copper Covered Steel
PTFE = PolyTetraFluoroEthylene
(3)
TPAl = Tin Plated Aluminum
material
solid SPC(1)
solid PTFE(2)
copper tubing
-
ELECTRICAL CHARACTERISTICS
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
center conductor
dielectric
inner shield
outer shield
jacket
50Ω ± 1Ω
DC - 20 GHz
110 dB
5 000 V rms
3.4 kW
89 pF / m
27 pF / ft
70 % (4.8 ns / m)
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
Caution must be paid to the reduced
operating temperature range.
inches
0.036
0.117
0.141
-
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
RG401 will be used for application requiring
very low attenuation, high power and high
screening effectiveness.
CONSTRUCTION / DIMENSIONS
mm
0.92
2.98
3.58
-
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
APPLICATION NOTE
Cable assemblies
SEMI-RIGID CABLE .141
operating temperature range
fire resistance
halogen free
-40 / +90 °C
-40 / +194 °F
not applicable
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
Watts
315
223
182
129
111
100
89
74
70
GHz)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
(1)
(1)
(2)
(2)
dB / m
dB / ft
Watts
0.21
0.06
900
0.31
0.09
636
0.41
0.12
520
0.64
0.20
367
0.79
0.24
318
0.92
0.28
285
1.08
0.33
256
1.42
0.43
212
1.54
0.47
201
(0.165 x √f GHz) + (0.04 x f GHz)
900 / √f GHz
SPC = Silver Plated Copper
PTFE = PolyTetraFluoroEthylene
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
B-35
www.radiall.com
Cable assemblies
SEMI-RIGID CABLE .250
(Aluminum)
p/n: C291 874 187
APPLICATION NOTE
Based on RG401 standard, this cable will
be selected for application requiring easy
conformability and/or application requiring
reduced weight.
Due to the aluminum outer conductor, this
cable can be hand formed with exceptional
ease with no spring back effect.
Cable can be reshaped, eliminating the need
for costly drawings.
The outer conductor material (aluminum)
slightly increases the attenuation compared
to standard RG401.
CONSTRUCTION / DIMENSIONS
center conductor
dielectric
inner shield
outer shield
jacket
material
solid SPC(1)
solid PTFE(2)
TPAl(3) tubing
-
mm
1.63
5.31
6.35
-
inches
0.064
0.209
0.250
-
ELECTRICAL CHARACTERISTICS
characteristic impedance
operating frequency range
shielding effectiveness
voltage withstanding
peak power
capacitance
velocity of propagation
50Ω ± 1Ω
DC - 18 GHz
110 dB
7 500 V rms
6.1 kW
89 pF / m
27 pF / ft
70 % (4.8 ns / m)
MECHANICAL CHARACTERISTICS
recommended minimum
bending radius
weight
9.53 mm
0.375 inch
79.5 g / m
0.0530 lbs / ft
ENVIRONMENTAL CHARACTERISTICS
operating temperature range
fire resistance
halogen free
-40 / +100 °C
-40 / +212 °F
not applicable
no
FREQUENCY / ATTENUATION (typ.) /
CW MAX POWER (sea level / 25 °C)
GHz
1.0
2.0
3.0
6.0
8.0
10.0
12.4
18.0
20.0
attenuation calculation (dB/m)
power calculation (W)
dB / m
dB / ft
0.22
0.07
0.33
0.10
0.43
0.13
0.68
0.21
0.83
0.25
0.97
0.29
1.13
0.34
1.48
0.45
1.60
0.49
(0.18 x √f GHz) + (0.04 x f
550 / √f GHz
Watts
550
389
318
225
194
174
156
130
123
GHz)
SPC = Silver Plated Copper
PTFE = PolyTetraFluoroEthylene
(3)
TPAl = Tin Plated Aluminum
(1)
(2)
B-36
Note: typical attenuation for a couple of connectors (dB) = 0.045 x √f (GHz)
www.radiall.com
SHF2.4M
4.59 dB/m @ 40 GHz
14 g/m
SHF3M
3.11 dB/m @ 40 GHz
(1.91 @ 18 GHz)
35 g/m
2.24 dB/m @ 30 GHz
(1.63 @ 18 GHz)
45 g/m
1.27 dB/m @ 26.5 GHz
(1.02 @ 18 GHz)
60 g/m
SHF8M
0.68 dB/m @ 18 GHz
130 g/m
SHF13
0.33 dB/m @ 9.5 GHz
280 g/m
DC - 40GHz
DC - 40GHz
SHF4.2M
DC - 30GHz
SHF5M
DC - 26.5GHz
DC - 18GHz
DC - 9.5GHz
139 dB/100ft
4.3 g/ft
10.6 g/ft
SHF Cable
Ultra low loss SHF cable range
94 dB/100ft (58 @ 18 GHz)
13.6 g/ft
68 dB/100ft (49 @ 18 GHz)
18.2 g/ft
38 dB/100ft (31 @ 18 GHz)
21 dB/100ft
39.4g/ft
10dB/100ft
84.8 g/ft
Also available with stranded inner conductor
More flexible
SHF3, SHF5 and SHF8
Other available versions
A/10
Crush resistant
1000N/10cm
SHF5MA/10
and SHF8MA/10
OD
UV resistant
SHF5OD, SHF5MOD,
SHF8OD and SHF8MOD
LW-2
44 g/m for SHF5M
(13.3 g/ft)
92 g/m for SHF8M
(28.04 g/ft)
SHF5MLW-2
and SHF8MLW-2
AF-2
51 g/m for SHF5M
(15.4 g/ft)
100 g/m for SHF8M
(30.48 g/ft)
SHF5MAF-2 and SHF8MAF-2
Hermetically sealed @ 150°C
15 Km (50,000 ft)
fluid resistant
Armored
cable
Outdoor
cable
Light weight
cable
Air Frame
cable
B-37
www.radiall.com
GHz
1.0
2.0
4.0
6.0
8.0
12.4
18.0
26.5
40.0
SHF2.4M SHF3M SHF4.2M SHF5M
0.62
0.39
0.32
0.23
0.89
0.56
0.46
0.32
. 0
1.28
0.81
0.68
0.46
0
1.59
1.01
0.85
0.57
0
1.86
1.19
1.01
0.66
3.5
2.36
1.53
1.30
0.84
5
1.91
1.63
1.02
320091
4.
3.62
2.41
2.07
1.27
4.59
3.11
SHF8M
0.15
0.21
0.30
0.37
0.44
0.55
GHz
1.0
o
2.0
4.0
6.0
8.0
12.4
18.0
26.5
40.0
SHF13
0.09
0.14
0.20
0.26
0.30
Typical
Attenuation (dB/100 ft)
Attenuation (dB/m)
Typical
SHF Cable
Ultra low loss shf cable range
SHF2.4M
18.90
27.08
39.01
48.45
56.60
Atte
71.96
88.56
110.30
140.05
SHF3M SHF4.2M SHF5M
11.73
9.75
6.86
16.95 14.15
9.79
24.69 20.73 14.02
30.91 26.06 17.34
36
tion34 30.74 20.19
46.73 39.76 25.50
58.17 49.77 31.19
73.42 63.23 38.56
94.75
SHF8M
4.42
6.34
9.14
11.37
13.29
16.92
SHF13
2.87
4.18
6.16
7.78
9.21
Attenuation
1
5.00
0.5
4.50
0
4.00
SHF2.4M
dB/m
3.50
SHF3M
3.00
SHF4.2M
2.50
SHF5M
36
2.00
SHF8M
1.50
SHF13
1.00
0.50
0.00
2
4
6
8
10
12
14
16
18
20
22
24M
26
P
28
er
30
32
34
36
38
40
Frequency (GHz)
SHF2.4M SHF3M SHF4.2M SHF5M SHF8M
50
260
400
630
850 1600
200
180
280
450
600 1100
dB/m
130
200
310
420
800
900
105
160
260
340
650
0
90
140
220
300
560
300
75
120
180
240
450
00 0
60
90
150
200
380
50
80
140
190
35
60
SHF13
2500
1800
1300
1000
900
SHF2.4M
2400
SHF3M
2100
SHF4.2M
1800
SHF5M
1500
SHF8M
1200
SHF13
900
600
300
50
0
(*) CW max power calculated at sea level / 40°C and V.S.W R. 1:1
(W
MaxS Power
F 2
2700
(W)
GHz
1.0
2.0
4.0
6.0
8.0
12.4
18.0
26.5
40.0
CW Max Power (*)
Power (W)
4
8
12
16
20
24
28
32
Frequency (GHz)
Phase change vs temperature
SHF5M - SHF8M (Typ.)
2 000
1 800
1 600
1 400
1 200
1 000
(PPM)
800
600
400
200
)0
-200
-80
-60
-40
-20
0
20
40
-400
-600
-800
-1 000
Temperature (°C)
B-38
www.radiall.com
0
20
40
60
80
100
120
140
36
40
Company Profile
AUTOMOTIVE
AEROspace
Cable
designation
Cable
Group
/Ω
Imp.
Ω
Core type
Cable dimensions mm (inch)
Core 
Insulator  Screen
RG 174 A/U
RG 178 B/U
RG 178 B/U
RG 178 non m.
RG 179 B/U
RG 187 A/U
RG 188 A/U
RG 196 A/U
RG 212 /U
RG 213 /U
RG 214 /U
RG 215
RG 216 /U
RG 217 /U
RG 218 /U
RG 223 /U
RG 225 /U
RG 303 /U
RG 316 /U
RD 316
RG 393
RG 400
2.6 / 50 S
2 / 50 S
2 / 50 S
2 / 50 S
2.6 / 75 S
2.6 / 75 S
2.6 / 50 S
2 / 50 S
8 / 50 D
10 / 50 S
11 / 50 D
10 / 50 S
11 / 75 D
14 / 50 D
22 / 50 S
5 / 50 D
11 / 50 D
5 / 50 S
2.6 / 50 S
2.6 / 50 D
10 / 50 D
5 / 50 / D
50
50
50
50
75
75
50
50
50
50
50
50
75
50
50
50
50
50
50
50
50
50
7 x 0.16
7 x 0.1
7 x 0.1
7 x 0.1
7 x 0.1
7 x 0.1
7 x 0.17
7 x 0.1
solid
7 x 0.75
7 x 0.75
7 x 0.75
7 x 0.4
solid
solid
solid
7 x 0.8
solid
7 x 0.17
7 x 0.17
7 x 0.81
19 x 0.19
0.48 (.019)
0.30 (.012)
0.30 (.012)
0.29 (.011)
0.30 (.012)
0.30 (.012)
0.51 (.020)
0.30 (.012)
1.41 (.056)
2.26 (.089)
2.25 (.089)
2.25 (.089)
1.21 (.048)
2.69 (.106)
4.95 (.195)
0.89 (.035)
2.38 (.094)
0.94 (.037)
0.53 (.021)
0.53 (.021)
2.39 (.094)
0.98 (.039)
RD 179
BT 3002
BT 2002
2.6 / 75 D
3.6 / 75 D
5 / 75 D
75
75
75
7 x 0.10
solid
7 x 0.20
0.30 (.012)
0.31 (.012)
0.60 (.024)
1.52 (.060)
0.84 (.033)
0.84 (.033)
0.84 (.033)
1.60 (.063)
1.60 (.063)
1.52 (.060)
0.86 (.034)
4.70 (.185)
7.24 (.285)
7.24 (.285)
7.25 (.285)
7.24 (.285)
9.40 (.370)
17.27 (.680)
2.95 (.116)
7.24 (.285)
2.95 (.116)
1.52 (.060)
1.52 (.060)
7.24 (.285)
2.95 (.116)
S
S
S
S
S
S
S
S
D
S
D
S
D
D
S
D
D
S
S
D
D
D
Outer 
2.79 (.110)
1.78 (.070)
1.83 (.072)
1.80 (.071)
2.54 (.010)
2.79 (.110)
2.79 (.110)
2.03 (.080)
8.43 (.331)
10.30 (.406)
10.80 (.425)
10.29 (.405)
10.80 (.425)
13.84 (.545)
22.10 (.870)
5.38 (.212)
10.90 (.429)
4.32 (.170)
2.49 (.098)
2.80 (.110)
9.91 (.390)
4.95 (.195)
DEFENSE
INDUSTRIAL
INSTRUMENTATION
MEDICAL
SPACE
TELECOM
Radiall cable if applicable
P/N
Remark
C291 150 000
C291 145 007
C291 145 060
C291 140 087
C291 210 007
C291 211 006
C291 160 006
C291 110 006
na
C291 510 000
C291 600 000
na
C291 610 000
C291 620 000
C291 630 000
C291 330 000
C291 605 007
na
C291 170 007
C291 185 067
C291 511 007
C291 324 007
PVC jacket
FEP jacket
PVC jacket
non magnetic / FEP jacket
FEP jacket
PTFE jacket
PTFE jacket
PTFE jacket
C291 230 080
C291 246 046
C291 333 080
LSOH jacket
FEP jacket
FEP jacket
s.a.
PointVirgule +33 3 44 23 48 48
2011
Simply Your Best Connection
.
Technical information and sales contacts are available at : www.radiall.com
The Best End-to-End Interconnect Solutions
PVC jacket
PVC jacket
PVC jacket
PVC jacket
PVC jacket
PVC jacket
glass fiber jacket
We offer an extensive range of solutions that supports the most demanding signal transmission applications.
4G wireless infrastructure, active array radars, IED’s detection, electrical wiring in aircrafts, soldier tactical radios,
in-vehicle communications networks, and magnetic resonance imaging systems are just a few of the complex
applications that we support.
• RF coaxial connectors
• Multipin rectangular connectors
• Fiber optic connectors and transceivers
• Rack and panel connectors
• Coaxial and fiber optic cable assemblies and harnesses
• Antennas for tactical networks, aerospace
• High frequency microwave components
and instrumentation
• Coaxial switches, including the smallest
and most reliable SPDT relay
.
FEP jacket
FEP jacket
FEP jacket
FEP jacket
Flexible cable BT approved
D
D
D
3.07 (.121)
3.55 (.140)
5.1 (.200)
India - Radiall India Pvt. Ltd.
Semi rigid cables MIL-C-17 standard
RG 401 /U
RG 401 alu
RG 402 /U
RG 402 tin
RG 402 silver
RG 402 alu
RG 402 non m.
RG 405 /U
RG 405 tin
RG 405 alu
RG 405 non m.
.047"
.047" tin
.250"
.250"
.141"
.141"
.141"
.141"
.141"
.085"
.085"
.085"
.085"
.047"
.047"
50
50
50
50
50
50
50
50
50
50
50
50
50
solid
solid
solid
solid
solid
solid
solid
solid
solid
solid
solid
solid
solid
1.63 (.064)
1.63 (.064)
0.92 (.036)
0.92 (.036)
0.92 (.036)
0.92 (.036)
0.92 (.036)
0.51 (.020)
0.51 (.020)
0.51 (.020)
0.51 (.020)
0.29 (.011)
0.29 (.011)
Hand-formable
Hand-formable
Hand-formable
Hand-formable
.085"
.141"
.141"
.141"
50
50
50
50
solid
solid
solid
solid
0.51 (.020)
0.92 (.036)
0.92 (.036)
0.92 (.036)
5.31 (.209)
5.31 (.209)
2.98 (.117)
2.98 (.117)
2.98 (.117)
2.98 (.117)
2.98 (.117)
1.68 (.066)
1.68 (.066)
1.68 (.066)
1.68 (.066)
0.94 (.037)
0.94 (.037)
--------------
6.35 (.250)
6.35 (.250)
3.58 (.141)
3.58 (.141)
3.58 (.141)
3.58 (.141)
3.58 (.141)
2.20 (.087)
2.20 (.087)
2.20 (.087)
2.20 (.087)
1.19 (.047)
1.19 (.047)
C291 870 001
copper tubing
C291 874 187
tinned alu tubing
C291 860 001
copper tubing
C291 862 005
tinned copper tubing
C291 861 066 silvered copper tubing
C291 864 187
tinned alu tubing
C291 861 061 non magnetic / copper tubing
C291 850 001
copper tubing
C291 850 005
tinned copper tubing
C291 844 187
tinned alu tubing
C291 851 001 non magnetic / copper tubing
C291 855 001
copper tubing
C291 855 065
tinned copper tubing
2.21 (.087)
3.50 (.138)
4.05 (.159)
4.50 (.177)
C291 844 065
C291 864 065
C291 866 378
C291 866 270
.
Best Value-added Services
D1C004XE - 2010 November Edition
1.6 (.063)
1.95 (.077)
2.5 (.098)
• Collaboration: We work closely with your engineers to understand your business, your technical needs, and your
budgetary issues;
• Wide Product Range: We manage our product lines thru the entire lifecycle in order to offer you a wide selection of
standard products at an affordable cost;
• Custom Products: We can tailor products to specific equipment and application needs;
• Global Presence: We’re everywhere you need us, with worldwide sales, engineering support, R&D in North America,
Europe, and Asia, and manufacturing facilities strategically located in the United States, Mexico, France, India, and China;
• Responsive Support and Service: From the design stage, planning to post-installation support, we’re with you at every
step, whether you need sales support or engineering expertise;
• On-time Delivery: We support your logistical needs so you get the products when and where you need them;
• Warranty: We proudly stand behind our products.
Hand-formable cable
1.63 (.064)
2.95 (.116)
2.98 (.117)
2.98 (.117)
-----
tin soaked braid
tin soaked braid
FEP jacket
LSZH jacket
Certifications and Environmental
Corrugated cables (with helical or ringed/annular copper tube)
Flexible
Flexible
Flexible
Flexible
Flexible
Super flexible
Super flexible
Super flexible
Super flexible
1/4"
1/2"
7/8"
1 1/4"
1 5/8"
1/4"
3/8"
1/2"
7/8"
50
50
50
50
50
50
50
50
50
solid
solid
solid
solid
solid
solid
solid
solid
tube
Note: S = single braid. D = dual braid. 2.38 (.094)
4.80 (.189)
9.13 (.359)
12.7 (.500)
17.3 (.681)
1.90 (.075)
2.60 (.102)
3.60 (.142)
9.04 (.356)
6.40 (.252)
11.6 (.457)
22.5 (.866)
32.5 (1.28)
43.5 (1.71)
4.70 (.185)
6.30 (.248)
8.70 (.343)
23.62 (.930)
----------
8.70 (.343)
16.35 (.644)
27.7 (1.091)
39.5 (1.55)
50.5 (1.99)
7.40 (.291)
10.8 (.425)
13.2 (.520)
27.48 (1.082)
na
C291 972 085
na
na
na
C291 993 080
C291 996 070
C291 994 080
C291 996 580
Coaxial, rf & microwave
ringed/annular tube
ringed/annular tube
ringed/annular tube
ringed/annular tube
ringed/annular tube
helical tube
helical tube
helical tube
helical tube
Full Line Catalog
Radiall is ISO 9001: 2008 certified and dedicated to continuous improvement
programs that have resulted in also being AS9100, TS16949 and ISO 14001
certified. In addition, Radiall is committed to investing in its people, future
technologies and the environment, such as being RoHS (Restriction of Hazardous Substances) and REACH (Registration,
Evaluation, Authorization and Restriction of Chemical substances) compliant.
For more information about cables manufactured by Radiall, please consult our online catalog.
www.radiall.com
Radiall is a global leader in the design, development and
manufacturing of leading edge interconnect solutions. Dedicated
to understanding its customers’ needs since 1952, Radiall has
earned the reputation of being “the best of the best” in engineering
ingenuity by providing a constant flow of creative system solutions
serving the telecommunications, aerospace, defense, instrumentation,
automotive, industrial, medical and broadcast markets.
www.radiall.com
Coaxial, rf
& microwave
www.radiall.com
Download PDF
Similar pages