CPI 2014 CATALOG SECTION 5: CABLE MANAGEMENT

CABLE MANAGEMENT PRODUCTS
Cable Managers & Accessories
Evolution® Cable Management
Velocity® Cable Management
Velocity® Standard Pack
Vertical Cable Management
Global Standard Pack
Horizontal Cable Management
Saf-T-Grip Straps
Cable Manager Accessories
Page 5-3
Page 5-8
Page 5-12
Page 5-13
Page 5-18
Page 5-28
Page 5-34
Page 5-35
CABLE MANAGEMENT PRODUCTS
Connecting switches and servers with the right cabling is crucial to maximizing uptime,
especially during system changes and updates. That is why it is important to keep your system
organized with CPI Cable Management Products, an end-to-end solution that makes it easier to
identify, access and sort out all the cables and cords in your network. CPI’s Cable Management
Products help untangle any configuration and increase cable performance with systems that run
within, between and around racks and cabinets. Rack-mount cable managers provide additional
support for cable bundles by defining cable pathways, a critical step in achieving better cable
organization.
To adapt to your data center needs, CPI Cable Management Products have been designed in a
large variety of widths, heights and depths. They are available in several horizontal and vertical
sections of various dimensions, utilizing rack-mount unit finger guides and/or rings, and feature
door panels to hide and secure cable.
CPI Cable Management Products feature:
• High-quality construction and design
• Proper cable bend radii to ensure maximum performance of data transmission
• Decreased potential cable damage
• Easy cable moves, adds and changes
• Prevention of tangled cords
• Meets ANSI/TIA/EIA installation guidelines for Category 5e/6/6a and fiber cables
• Provides for a professional, attractive installation
Featured Product:
Additional standard finishes (Glacier White)
are available for most Cable Managers and
Accessories.
5-2
CPI: 800-834-4969
EVOLUTION® VERTICAL CABLE MANAGEMENT
Evolution® Cable Management
CPI Evolution® Cable Management provides an engineered solution for managing
high-density cabling applications on open two-post and four-post CPI Rack
Systems, delivering increased performance to match the demands of data center
applications. Featuring easy-to-use doors with styling that complements the CPI
TeraFrame® Family of Cabinets; Evolution Cable Management provides innovative
interior features to help maximize the capacity and utility of vertical and
horizontal cable management.
Evolution Vertical Cable Manager:
Use vertical managers on the sides of racks to manage premise cables, patch
cords and jumper cords. Vertical managers include plastic T-shaped cable guides
with openings that align with each rack-mount unit space on the rack. Rounded
edges on the cable guides, and the top of the manager protect cables as they
enter or exit the interior storage space. On double-sided managers, Movable MidSections allow personalized placement of Cable Distribution Spools and other
cable management accessories to effectively route patch cords. Use accessory
Fiber Segregation Kits to create a dedicated internal channel for fiber cabling or
accessory Cable Lashing Bar Kits to anchor premise cables closer to the Movable
Mid-Sections to increase capacity. The Movable Mid-Sections can also be
positioned for a 50/50, 40/60 or 60/40 front/rear split of the internal cable
management space to match cabling requirements. The door is secured by a
spring-loaded two-point latch controlled by a single knob; simply turn the knob on
the right or left side of the door and pull to swing the door open or turn both
knobs to remove the door. The door attaches to the base and top of the cable
manager, not the cable guides, and opens wider than previous designs for better
access to cables. Vertical managers are available in single-sided, double-sided
and combination configurations in five widths to match cabling requirements.
Features:
• Improved T-shaped cable guides decrease deflection when loaded with
cables, especially important when deploying Cat 6a cable
• Rounded edges on the cable guides protect cables as they enter and exit the
storage space
• Door opens to the right or left with a single knob
• Rigid trough minimizes movement when installed on the end of a row of
racks; solid construction with a full rectangular base supports large bundles
of heavy cables
• Openings in the back of the single-sided and middle of the double-sided
managers allow cables to pass easily front to rear
• Double-sided managers have Movable Mid-Sections that allow for flexibility
in the volume of cable management space provided in the front and rear
portions of the cable manager
• Various cable management accessories are available to divide the interior
space and manage cable slack
For Horizontal Evolution Cable Management, see page 5-28.
5-3
CPI: 800-834-4969
EVOLUTION® VERTICAL CABLE MANAGEMENT
Evolution g1 Single-Sided Vertical
Cable Manager
• Rigid cable manager with 1U spaced plastic T-shaped cable guides (fingers)
• Three Fixed Accessory Panels at the back of the cable manager
• Three large Cable Distribution Spools included with 10”, 12” and 15” (250
mm, 300 mm and 380 mm) wide managers
Single-Sided
Vertical Cable
Manager also
available in 6’H
(1.8 m) and
8’H (2.4 m)
Black
Glacier White
7’H (2.1 m)
W x D - in (mm)
Shipping
Weight
lb (kg)
35511-703
35511-E03
6 x 13.2 (150 x 335)
57 (25.9)
35512-703
35512-E03
8 x 13.2 (200 x 335)
61 (27.7)
35513-703
35513-E03
10 x 13.2 (250 x 335)
67 (30.4)
35514-703
35514-E03
12 x 13.2 (300 x 335)
73 (33.1)
35515-703
35515-E03
15 x 13.2 (380 x 335)
83 (37.6)
Part Number & Finish
Evolution g2 Double-Sided Vertical
Cable Manager
Double-Sided
Vertical Cable
Manager also
available in 6’H
(1.8 m) and
8’H (2.4 m)
• Rigid cable manager with 1U spaced plastic T-shaped cable guides (fingers)
• Three Movable Mid-Sections; creates 50/50, 60/40 or 40/60 interior split
• Three large Cable Distribution Spools included with 10”, 12” and 15” (250
mm, 300 mm and 380 mm) wide managers
Part Number & Finish
Shipping
Weight
lb (kg)
Black
Glacier White
7’H (2.1 m)
W x D - in (mm)
35521-703
35521-E03
6 x 24.5 (150 x 622)
94 (42.6)
35522-703
35522-E03
8 x 24.5 (200 x 622)
101 (45.8)
35523-703
35523-E03
10 x 24.5 (250 x 622)
110 (49.9)
35524-703
35524-E03
12 x 24.5 (300 x 622)
118 (53.5)
35525-703
35525-E03
15 x 24.5 (380 x 622)
129 (58.5)
Evolution g3 Combination Vertical
Cable Manager
• Rear Cable Rings with spin-open latches on back (no door/cover)
• Three large Cable Distribution Spools included with 10”, 12” and 15” (250
mm, 300 mm and 380 mm) wide managers
Combination
Vertical Cable
Manager also
available in 6’H
(1.8 m) and
8’H (2.4 m)
Black
Glacier White
7’H (2.1 m)
W x D - in (mm)
Shipping
Weight
lb (kg)
35571-703
35571-E03
6 x 20.2 (150 x 513)
68 (30.8)
35572-703
35572-E03
8 x 20.2 (150 x 513)
72 (32.7)
35573-703
35573-E03
10 x 20.2 (150 x 513)
78 (35.4)
35574-703
35574-E03
12 x 20.2 (150 x 513)
84 (38.1)
35575-703
35575-E03
15 x 20.2 (150 x 513)
94 (42.6)
Part Number & Finish
5-4
CPI: 800-834-4969
EVOLUTION® VERTICAL CABLE MANAGEMENT
Evolution® Cable Management Accessories
Fiber Segregation Kit
35475-701
Creates a separate pathway for fiber cables and patch cords inside Evolution
Vertical Managers. The number of kits allowed per manager depends on the
position of the Movable Mid-Section in double-sided managers and the width of
the vertical cable manager (see table below). Each kit includes two 20.5”H (521
mm) J-shaped steel mounting brackets, eight plastic Fiber Segregation Spools and
mounting hardware. The Fiber Segregation Spools turn 360° with stops at 90°,
allowing easy access to fiber cables. The assembled bracket is 3.8”W x 4.3”D
(97 mm x 109 mm) and includes mounting hardware.
Cable Lashing Bar Kit
Cable Lashing Bar Kit provides tie points for cables inside Evolution Vertical
Managers. Use up to six cable lashing bars (front/rear) in 6”W (150 mm) vertical
cable managers and up to ten (front/rear) in the 8”W (200 mm), 10”W (250 mm),
12”W (300 mm) and 15”W (300 mm) vertical cable managers. Each kit includes
four round .23” (5.7 mm) diameter 20.6”L (524 mm) steel lashing bars and
mounting hardware.
Cable Divider Bar Kit
35473-001
Provides tie points for cables inside the Evolution Vertical Cable Manager and
divides the interior of the cable manager to create multiple pathways for cables.
Each kit includes four Cable Divider Bars, 5.75”H x 1”W x 20”L (146 mm x 25 mm
x 510 mm) and mounting hardware. Divider Bars are welded steel construction
consisting of a vertical cable lashing bar and two U-shaped cable dividers. Use
side-by-side to create multiple pathways in 10”W (250 mm) or wider cable
managers.
Floor Bracket
Floor Bracket secures the base of the Evolution Vertical Managers to the floor
when located at the end of a row of equipment racks. Light-duty, steel bracket
with attachment hole sized for 1/4” hardware; packs of 12, order separately.
35503-701
Part
Number
Description
Shipping
Weight
lb (kg)
35475-701
Fiber Segregation Kit, Black
6 (2.7)
35473-001
Cable Lashing Bar Kit, Zinc
2 (0.9)
35503-701
Cable Divider Bar Kit, Black
3 (1.4)
35506-701
Floor Bracket, Black
3 (1.4)
35506-701
Maximum Number of Fiber Segregation Kits
and all
Cable Manager Double-Sided with 60/40 Single-Sided
Double-Sided
Width in (mm) Front/Rear Split (60% side) otherpositions
See Cable Fill Tables at
www.chatsworth.com/cablefill
6 (150)
8 (200)
10 (250)
12 (300)
15 (380)
5-5
1
1
2
2
2
0
1
1
2
2
CPI: 800-834-4969
EVOLUTION® VERTICAL CABLE MANAGEMENT
Evolution® Cable Management Accessories
Solid Rear Panel Manager
Encloses the rear of the Evolution g1 Single-Sided Vertical Cable Manager. Hangs
from the top of the manager or attaches to the back of the Fixed Accessory Panels.
Install Cable Distribution Spools and any additional Fixed Accessory Panels before
attaching the Solid Rear Panel; does not block attachment of other accessories
inside the manager. Sold individually or in pairs; includes hardware.
Solid Mid Panel
35501-X02
Covers and divides the front and rear of the Evolution g2 Double-Sided Vertical
Cable Manager. Easy installation; attaches to the back of the Movable MidSections inside the manager. Does not block attachment of additional Movable
Mid-Sections or other cable management accessories inside the manager. Includes
one Moveable Mid-Section for 7’H (2.1m) manager and two for 8’H (1.8 m)
manager. Sold individually or in packs of four; includes hardware.
Solid Side Panel Manager
Covers the side of an Evolution g2 Double-Sided Vertical Cable Manager located at
the end of a row of equipment racks. Easy tool-less installation; hangs from the
top of the manager and attaches at the bottom of the manager with included
snap-in hardware. Sold individually or in pairs.
35497-X02
35502-X02
Accessories listed on this page are also
available in both 6’ (1.8) and 8’ (2.4) heights.
Part
Number
Description
Height - 7’H (2.1 m)
Width - in (mm)
Shipping
Weight
lb (kg)
35501-X02
35501-X05
35501-X08
35501-X11
35501-X14
35501-X52
35501-X55
35501-X58
35501-X61
35501-X64
35497-X02
35497-X05
35497-X08
35497-X11
35497-X14
35497-X52
35497-X55
35497-X58
35497-X61
35497-X64
35502-X02
35502-X52
Solid Rear Panel, 6 (150), Each
Solid Rear Panel, 8 (200), Each
Solid Rear Panel, 10 (250), Each
Solid Rear Panel, 12 (300), Each
Solid Rear Panel, 15 (380), Each
Solid Rear Panel, 6 (150), Pair
Solid Rear Panel, 8 (200), Pair
Solid Rear Panel, 10 (250), Pair
Solid Rear Panel, 12 (300), Pair
Solid Rear Panel, 15 (380), Pair
Solid Mid Panel, 6 (150), Each
Solid Mid Panel, 8 (200), Each
Solid Mid Panel, 10 (250), Each,
Solid Mid Panel, 12 (300), Each
Solid Mid Panel, 15 (380), Each
Solid Mid Panel, 6 (150), Pack of 4
Solid Mid Panel, 8 (200), Pack of 4
Solid Mid Panel, 10 (250), Pack of 4
Solid Mid Panel, 12 (300), Pack of 4
Solid Mid Panel, 15 (380) Pack of 4
Solid Side Panel Manager, Each
Solid Side Panel Manager, Pair
11 (5.0)
11 (5.0)
11 (5.0)
11 (5.0)
11 (5.0)
42 (19.1)
42 (19.1)
42 (19.1)
42 (19.1)
42 (19.1)
16 (7.3)
16 (7.3)
16 (7.3)
16 (7.3)
16 (7.3)
62 (28.1)
62 (28.1)
62 (28.1)
62 (28.1)
62 (28.1)
19 (8.6)
35 (15.9)
X=color; 7=Black, E=Glacier White.
5-6
CPI: 800-834-4969
EVOLUTION® VERTICAL CABLE MANAGEMENT
Evolution® Cable Management Accessories
Fixed Accessory Panel Kit for Evolution g1 Single-Sided Manager
Kit includes three Fixed Accessory Panels for the Evolution g1 Single-Sided Vertical
Cable Manager. Select to match the width of the cable manager; includes
installation hardware.
Movable Mid-Section Kit for Evolution g2 Double-Sided Manager
Kit includes three Movable Mid-Sections for the Evolution g2 Double-Sided
Vertical Cable Manager. Select to match the width; includes installation hardware.
35492-X02
Cable Distribution Spools
Spools provide slack management and strain relief for patch cords and jumper
cables inside Evolution Vertical Cable Managers. Three large cable distribution
spools are included with each 10”, 12” and 15” wide (250 mm, 300 mm and 380
mm) vertical cable manager (will not fit other sizes). Attaches inside vertical cable
managers. Spools are 2.75” (69.9 mm) in diameter and 5.9”L (150 mm) and made
from black plastic; each kit includes four spools and mounting hardware.
Cable Distribution Spool Spacer Kit
35493-X02
15008-001
Spool Spacer Kit is used with the Cable Distribution Spool to offset the spool so
the front edge of the spool is close to the front edge of cable management fingers
in the Evolution g2 Double-Sided Cable Managers. Use in 10”, 12” and 15” (250
mm, 300 mm and 380 mm) wide managers; each manager includes three spools
and three spacers. Attaches to the Movable Mid-Sections inside double-sided
Evolution g2 Vertical Cable Managers. Use one Cable Distribution Spool Spacer
with each Cable Distribution Spool when the Movable Mid-Sections in the cable
manager are set for a 50/50 front/rear split. Use two Cable Distribution Spool
Spacers with each Cable Distribution Spool when the Movable Mid-Sections in the
cable manager are set for a 60/40 front/rear split; stack both of the Cable
Distribution Spool Spacers on the 60% side. Spacers are 2.8” (71 mm) in diameter
and 2.5”H (64 mm) and made from black plastic; each kit includes eight spacers
and mounting hardware.
Part
Number
35505-001
35492-X01
35492-X02
35492-X03
35492-X04
35492-X05
35493-X01
35493-X02
35493-X03
35493-X04
35493-X05
15008-001
35505-001
Description
Width - in (mm)
Fixed Accessory Panel Kit
For 6 (150) Evolution g1 Single-Sided
For 8 (200) Evolution g1 Single-Sided
For 10 (250) Evolution g1 Single-Sided
For 12 (300) Evolution g1 Single-Sided
For 15 (380) Evolution g1 Single-Sided
Movable Mid Section Kit
For 6 (150) Evolution g2 Double-Sided
For 8 (200) Evolution g2 Double-Sided
For 10 (250) Evolution g2 Double-Sided
For 12 (300) Evolution g2 Double-Sided
For 15 (380) Evolution g2 Double-Sided
Cable Distribution Spools, Pack of 4, Black
Cable Distribtuoin Spool Spacer Kit, Black
Shipping
Weight
lb (kg)
3 (1.4)
4 (1.8)
5 (2.3)
6 (2.7)
7 (3.2)
4 (1.8)
5 (2.3)
5 (2.3)
7 (3.2)
8 (3.6)
2 (0.9)
1 (0.5)
X=color; 7=Black, E=Glacier White.
5-7
CPI: 800-834-4969
VELOCITY® CABLE MANAGEMENT
Velocity® Cable Management
CPI’s Velocity® Cable Management is an economical cable management
solution for everyday use in telecommunication rooms, equipment rooms and
lab spaces and creates a complete vertical and horizontal pathway for
premise cabling and patch cords on CPI Rack Systems.
Vertical Cable Managers:
Velocity Cable Management includes single- and double-sided vertical cable
managers available in four widths and three heights. They can ship
unassembled in compact packaging to reduce shipping costs and storage
space, providing easier staging and handling on the job site with less
packaging to remove. No tools are required to assemble the cable manager.
The components simply snap together, and the manager bolts to the side of
the rack with included hardware.
The vertical cable manager features a large cross section to maximize internal
cable management space. To simplify cable management, T-shaped cable
guides and openings on the sides of the manager align with each rack-mount
unit and have rounded edges to protect cables from snags. Snap-on covers
are included and swing open to the right or left to provide easy access and
protect cables when closed. The manager has openings in the body, which
allow cables to pass easily front-to-rear. Add the accessory Cable Spool Kit to
manage fiber, the Cable Lashing Bar Kit to secure large cable bundles or the
Cable Ring Kit to create a rear pathway on the back of single-sided managers.
Snaps together:
• Vertical managers for open two-post and four-post CPI Rack Systems that
have 3”D (80 mm) mounting channels; do not use with 6” Deep Standard
Rack or SeismicFrame Two-Post Rack
• Packaging:
- Each vertical cable manager ships unassembled in a single carton
- Each horizontal cable manager ships fully assembled in a single carton
• Material:
- Vertical cable manager has steel mid panels, splice plates and plastic
sides; covers on 3.6”W (91 mm) and 6”W (152 mm) managers are plastic;
covers on 10”W (254 mm) and 12”W (305 mm) managers are steel with
plastic hinges
- Horizontal cable manager is plastic
• Finish: Black epoxy-polyester hybrid powder coat paint on steel parts; black
plastic
For Velocity Horizontal Cable Management, see page 5-28.
5-8
CPI: 800-834-4969
VELOCITY® CABLE MANAGEMENT
Velocity® Single-Sided Vertical Cable
Managers
Single-Sided Vertical Cable Managers include:
• Four vertical side sections with T-shaped cable guides spaced 1U apart
• Four mid panels with attachment points for cable management
accessories
• Two splice plates used to assemble the top and bottom side sections
• Two half-height covers that snap onto the T-shaped cable guides
• Eight M8 hex bolts, washers and hex flange nuts to secure cable
managers to the rack
Velocity Single-Sided Vertical Cable Managers
Part
Number
Description
HxWxD
in (mm)
Shipping
Weight
lb (kg)
13901-701
70 x 3.6 x 9.7 (1778 x 91 x 246)
13902-701
70 x 6 x 9.8 (1778 x 152 x 249)
18 (8.2)
13904-701
70 x 10 x 10.3 (1778 x 254 x 262)
30 (13.6)
13905-701
70 x 12 x 10.4 (1778 x 305 x 264)
32 (14.5)
For 6’H (1.8 m), 38U Racks
17 (7.7)
For 7’H (2.1 m), 45U Racks
Note: 3.6”W & 6”W ship with extruded
plastic doors; 10”W & 12”W ship with
metal doors.
13901-703
80.5 x 3.6 x 9.7 (2045 x 91 x 246)
13902-703
80.5 x 6 x 9.8 (2045 x 152 x 249)
20 (9.1)
13904-703
80.5 x 10 x 10.3 (2045 x 254 x 262)
32 (14.5)
80.5 x 12 x 10.4 (2045 x 305 x 264)
34 (15.4)
13905-703
18 (8.2)
For 8’H (2.4 m), 51U/52U Racks
13901-715
91 x 3.6 x 9.7 (2311 91 x 246)
13902-715
91 x 6 x 9.8 (2311 x 152 x 249)
19 (8.6)
21 (9.5)
13904-715
91 x 10 x 10.3 (2311x 254 x 262)
34 (15.4)
13905-715
91 x 12 x 10.4 (2311 x 305 x 264)
36 (16.3)
Color is black. Velocity Single-Sided Vertical Cable Managers are 9.5”D (241 mm)
without doors. The overall depth listed in the order table varies due to the bevel on
the door, which differs slightly with width. Usable depth is 7.5” (191 mm). Usable
width is 1.3” (33 mm) less than overall width.
Velocity® Cable Managers are easy to ship
and store - compact packaging requires
less storage space, reduces waste and is
easier and more cost-efficient to ship.
See Cable Fill Tables at www.chatsworth.com/cablefill
5-9
CPI: 800-834-4969
VELOCITY® CABLE MANAGEMENT
Velocity® Double-Sided Vertical Cable
Manager
Double-Sided Vertical Cable Manager includes:
• Four vertical side sections with T-shaped cable guides spaced 1U apart
• Four mid panels with attachment points for cable management accessories
• Two splice plates used to assemble the top and bottom side sections
• Four half-height covers that snap onto the T-shaped cable guides
• Eight M8 hex bolts, washers and hex flange nuts to secure cable managers
to the rack
Velocity Double-Sided Vertical Cable Managers
Description
HxWxD
in (mm)
For 6’H (1.8 m), 38U Racks
Shipping
Weight
lb (kg)
13911-701
70 x 3.6 x 16.4 (1778 x 91 x 417)
23 (10.4)
13912-701
70 x 6 x 16.6 (1778 x 152 x 422)
26 (11.8)
13914-701
70 x 10 x 17.5 (1778 x 254 x 445)
37 (16.8)
13915-701
70 x 12 x 17.8 (1778 x 305 x 446)
40 (18.1)
Part
Number
For 7’H (2.1 m), 45U Racks
Note: 3.6”W & 6”W ship with extruded
plastic doors; 10”W & 12”W ship with
metal doors.
13911-703
80.5 x 3.6 x 16.4 (2045 x 91 x 417)
25 (11.3)
13912-703
80.5 x 6 x 16.6 (2045 x 152 x 422)
28 (12.7)
13914-703
80.5 x 10 x 17.5 ( 2045 x 254 x 445)
40 (18.1)
13915-703
80.5 x 12 x 17.8 (2045 x 305 x 446)
43 (19.5)
For 8’H (2.4 m), 51U/52U Racks
13911-715
91 x 3.6 x 16.4 (2311 x 91 x 417)
27 (12.2)
13912-715
91 x 6 x 16.6 (2311 x 152 x 422)
30 (13.6)
13914-715
91 x 10 x 17.5 (2311 x 254 x 445)
44 (20.0)
13915-715
91 x 12 x 17.8 (2311 x 305 x 464)
47 (21.3)
Color is black. Velocity Double-Sided Vertical Cable Managers are 16 “D (406 mm)
without doors. The overall depth listed in the order table varies due to the bevel on
the door, which differs slightly with width. Usable depth in the front of the manager
is 7.5” (191 mm). Usable depth at the rear of the manager is 5.5” (140 mm). Usable
width is 1.3” (33 mm) less than overall width.
See Cable Fill Tables at www.chatsworth.com/cablefill
5-10
CPI: 800-834-4969
VELOCITY® CABLE MANAGEMENT
Velocity® Cable Management Accessories
Cable Ring Kit
Creates a separate cable pathway on the back of a Velocity Single-Sided Vertical
Cable Manager for premise cables. Attaches to the sides with included hardware.
Match the kit to the width and height of the vertical cable managers; one kit per
manager. Rings are C-shaped, 3.0”H x 7.7”D (76 mm x 196 mm), made from
aluminum and painted black; latch is black plastic and spins open to provide
access to cables. Cable opening on 3.6”W (91 mm) rings is 1.4”W (36 mm); cable
opening on other rings is 3.8”W (97 mm). Each kit includes multiple rings and
mounting hardware. The kit for 6’ (1.8 m) include six rings, the kit for 7’ (2.1 m)
includes seven rings and the kit for the 8’ (2.4 m) includes eight rings.
13934-7XX
Cable Spool Kit
The Cable Spool Kit includes four small cable spools to provide slack management
and strain relief for patch cords and jumper cables inside the Velocity Vertical
Cable Managers. Attaches to the mid panel with included hardware. Use in 6”W
(152 mm) or wider vertical cable managers; one kit per side. Spools are 2” (51 mm)
in diameter and 6”L (152 mm) and made from aluminum; painted black. Each kit
includes four spools and mounting hardware.
13935-701
13928-001
Cable Lashing Bar Kit
Provides tie points for cables inside Velocity Vertical Cable Managers. Attaches to
the mid panel with included hardware. Use in 6”W (152 mm) or wider vertical
cable managers; one kit per side. Bars are .23” (5.7 mm) in diameter; two bars are
23.7”L (602 mm); four bars are 16.6”L (422 mm), and made from steel; zinc-plated,
silver-colored. Each kit includes six lashing bars and mounting hardware.
Part
Number
Description
HxW
ft (m) x in (mm)
Shipping
Weight
lb (kg)
13934-716
Cable Ring Kit for 6 (1.8) x 3.6 (91) Manager
8 (3.6)
13934-717
Cable Ring Kit for 7 (2.1) x 3.6 (91) Manager
9 (4.1)
13934-718
Cable Ring Kit for 8 (2.4) x 3.6 (91) Manager
11 (5.0)
13934-726
Cable Ring Kit for 6 (1.8) x 6 (152) Manager
9 (4.1)
13934-727
Cable Ring Kit for 7 (2.1) x 6 (152) Manager
11 (5.0)
13934-728
Cable Ring Kit for 8 (2.4) x 6 (152) Manager
12 (5.4)
13934-746
Cable Ring Kit for 6 (1.8) x 10 (254) Manager
12 (5.4)
13934-747
Cable Ring Kit for 7 (2.1) x 10 (254) Manager
14 (6.4)
13934-748
Cable Ring Kit for 8 (2.4) x 10 (254) Manager
15 (6.8)
13934-756
Cable Ring Kit for 6 (1.8) x 12 (305) Manager
14 (6.4)
13934-757
Cable Ring Kit for 7 (2.1) x 12 (305) Manager
16 (7.3)
13934-758
Cable Ring Kit for 8 (2.4) x 12 (305) Manager
18 (8.2)
13935-701
Cable Spool Kit, Pack of 4, Black
2 (0.9)
13928-001
Cable Lashing Bar Kit, Zinc
2 (0.9)
Cable ring kits are Black.
5-11
CPI: 800-834-4969
VELOCITY® STANDARD PACK
Velocity® Standard Pack
The Velocity® Standard Pack is an easy-to-use solution for managing
equipment and cabling at the cross connect. It includes one CPI Standard
Rack, a concrete floor installation kit and a single or double-sided Velocity
vertical cable manager packaged in a single carton.
Rack-Mount Unit (U)
marks simplify
equipment installation
Ground Studs located
directly on rack channel
Side cable openings
align with rack-mount
units on the rack
The Velocity Standard Pack is offered in four variations, with a single-sided or
double-sided cable manager in either 3.6”W (91 mm) or 6”W (152 mm). Cable
managers can be mounted on either side of the standard rack.
• Numbered rack-mount spaces on the Standard Rack are printed on the
equipment mounting channels, providing the installer an easy way of
positioning equipment in planned spaces
• Cable openings in Velocity vertical cable managers align with rack-mount
units on the rack, allowing cables to exit by rack-mount units
• Integrated masked grounding studs on the inside of the rack channel for quick
attachment to the Telecommunications Grounding System
• Cable openings have rounded edges to protect cable and will not deform or
break
• Cover snaps on and opens to the right or left for easy access to cables during
moves, adds or changes
Velocity Standard Pack includes:
• (1) 45U x 19” Standard Rack
• (1) Single or double-sided Velocity® vertical cable manager
• (1) Rack installation kit
Part
Number
Description
Width
in (mm)
Shipping
Weight
lb (kg)
57011-703
(1) Standard Rack, 45U x 19”EIA, UL, Black
(1) Velocity® Single-Sided Vertical Cable
Manager, 3.6”W (91 mm), Black
(1) Rack Installation Kit for concrete floor,
1/2” hardware, Zinc
47 (21.3)
57012-703
(1) Standard Rack, 45U x 19”EIA, UL, Black
(1) Velocity® Double-Sided Vertical Cable
Manager, 3.6”W (91 mm), Black
(1) Rack Installation Kit for concrete floor,
1/2” hardware, Zinc
60 (27.2)
57013-703
(1) Standard Rack, 45U x 19”EIA, UL, Black
(1) Velocity® Single-Sided Vertical Cable
Manager, 6”W (152 mm), Black
(1) Rack Installation Kit for concrete floor,
1/2” hardware, Zinc
50 (22.7)
57014-703
(1) Standard Rack, 45U x 19”EIA, UL, Black
(1) Velocity® Double-Sided Vertical Cable
Manager, 6”W (152mm), Black
(1) Rack Installation Kit for concrete floor,
1/2” hardware, Zinc
68 (30.8)
See Section 1 for rack shelf accessories.
5-12
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
MCS Master Cabling Section
The MCS Master Cabling Section virtually eliminates the need for horizontal
cable managers by providing frequent 1U spacing of the cable guides that
aligns precisely with the rack spacing.
Double-Sided MCS
shown with door open
Part
Number
Height
ft (m)
Shown on rack with
Jumper Tray
Depth
in (mm)
Includes innovative, rigid aluminum SwitchGate Door/Cover that hides and
conceals cable. A handle is included on the outside of the door/cover, making
removal and installation even easier.
• Extra-wide, contoured cable guides provide smooth movement and
meet UL 94V-O Flame Resistant standards
• SwitchGate Door/Cover is easily switched from right to left opening
and can be removed
• Double-Sided MCS Master Cabling Sections have edge-protected
pass through ports and vertical slots for optional Saf-T-Grip® straps
• 10”W (250 mm) version includes (4) Cable Distribution Spools
• Mounting hardware and doors are included
• Attach to Standard Racks, Universal Racks or QuadraRacks
Shipping
Weight
lb (kg)
Part
Number
14 (6.4)
15 (6.8)
16 (7.3)
17 (7.7)
18 (8.2)
20 (9.1)
22 (10.0)
30094-X00
30094-X01
30094-X02
30094-X03
30094-X05
30094-X15
30094-X08
16 (7.3)
17 (7.7)
19 (8.6)
20 (9.1)
21 (9.5)
23 (10.4)
25 (11.3)
30095-X00
30095-X01
30095-X02
30095-X03
30095-X05
30095-X15
30095-X08
38 (17.2)
40 (18.1)
43 (19.5)
45 (20.4)
48 (21.8)
51 (23.1)
56 (25.4)
30096-X00
30096-X01
30096-X02
30096-X03
30096-X05
30096-X15
30096-X08
4.4”W (112 mm) Single-Sided
30091-X00
30091-X01
30091-X02
30091-X03
30091-X05
30091-X15
30091-X08
5.6 (1.7)
6 (1.8)
6.6 (2.0)
7 (2.1)
7.6 (2.3)
8 (2.4)
9 (2.7)
8.08 (205.2)
8.08 (205.2)
8.08 (205.2)
8.08 (205.2)
8.08 (205.2)
8.08 (205.2)
8.08 (205.2)
5.6 (1.7)
6 (1.8)
6.6 (2.0)
7 (2.1)
7.6 (2.3)
8 (2.4)
9 (2.7)
8.08 (205.2)
8.08 (205.2)
8.08 (205.2)
8.08 (205.2)
8.08 (205.2)
8.08 (205.2)
8.08 (205.2)
5.6 (1.7)
6 (1.8)
6.6 (2.0)
7 (2.1)
7.6 (2.3)
8 (2.4)
9 (2.7)
8.08 (205.2)
8.08 (205.2)
8.08 (205.2)
8.08 (205.2)
8.08 (205.2))
8.08 (205.2)
8.08 (205.2)
5.6 (1.7)
6 (1.8)
6.6 (2.0)
7 (2.1)
7.6 (2.3)
8 (2.4)
9 (2.7)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
34 (15.4)
36 (16.3)
38 (17.2)
40 (18.1)
42(19.1)
45 (20.4)
49 (22.2)
6”W (150 mm) Double-Sided
10”W (250 mm) Single-Sided
30093-X00
30093-X01
30093-X02
30093-X03
30093-X05
30093-X15
30093-X08
Shipping
Weight
lb (kg)
Depth
in (mm)
4.4”W (112 mm) Double-Sided
6”W (150 mm) Single-Sided
30092-X00
30092-X01
30092-X02
30092-X03
30092-X05
30092-X15
30092-X08
Height
ft (m)
5.6 (1.7)
6 (1.8)
6.6 (2.0)
7 (2.1)
7.6 (2.3)
8 (2.4)
9 (2.7)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
38 (17.2)
40 (18.1)
43 (19.5)
45 (20.4)
48 (21.8)
51 (23.1)
56 (25.4)
10”W (250 mm) Double-Sided
5.6 (1.7)
6 (1.8)
6.6 (2.0)
7 (2.1)
7.6 (2.3)
8 (2.4)
9 (2.7)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
16.15 (410.2)
44 (20.0)
47 (21.3)
50 (22.7)
53 (24.0)
57 (25.9)
60 (27.2)
67 (30.4)
X=color; 5=Clear, 7=Black, E=Glacier White. Clear (-5XX) versions have black doors/covers and cable guides.
9’ (2.7 m) unit is an 8’ (2.4 m) unit with 1’ (0.3 m) extension.
5-13
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
MCS-EFX Master Cabling Section With
Extended Fingers
The MCS-EFX is a larger, higher capacity version of CPI’s popular MCS Master
Cabling Section vertical cable management solution. It is appropriate for
two-post and four-post applications and is available in single-sided and
double-sided configurations.
MCS-EFX is manufactured from a combination of strong, lightweight
aluminum sheet and plenum-rated composite materials for maximum strength
at minimal weight. MCS-EFX is packaged in a single carton for easy handling
and includes installation hardware.
• Cable openings on the side of MCS-EFX are sized to accommodate 48
patch cords, twice the capacity of the standard MCS; openings have
rounded edges to protect cable and will not deform or break
• Patented cable openings on the sides of MCS-EFX align with rack-mount
unit space on the rack, allowing cables to exit by raack-mount unit
• The door hinges open to the right or left for easy access to cables
during moves, adds and changes and locks in the closed position to protect
cables from damage
• Plastic Cable Guides meet UL 94V-O Flame Resistant standards
• 10”W and 12”W (250 mm and 300 mm) Double-Sided MCS-EFX include
(4) Cable Distribution Spools
• Mounting hardware and doors are included
• Attach to Standard Racks, Universal Racks or QuadraRacks
Extended fingers of
MCS-EFX
Hinged locking door
Part
Number
Height
ft (m)
Depth
in (mm)
Shipping
Weight
lb (kg)
Part
Number
31 (14.1)
32 (14.5)
35 (15.9)
40095-X03
40095-X05
40095-X15
40 (18.1)
42 (19.1)
45 (20.4)
40096-X03
40096-X05
40096-X15
44 (20.0)
47 (21.3)
50 (22.7)
40097-X03
40097-X05
40097-X15
6”W (150 mm) Single-Sided
40092-X03
40092-X05
40092-X15
7 (2.1)
7.6 (2.3)
8 (2.4)
10.62 (269.7)
10.62 (269.7)
10.62 (269.7)
7 (2.1)
7.6 (2.3)
8 (2.4)
10.62 (269.7)
10.62 (269.7)
10.62 (269.7)
7 (2.1)
7.6 (2.3)
8 (2.4)
10.62 (269.7)
10.62 (269.7)
10.62 (269.7)
7 (2.1)
7.6 (2.3)
8 (2.4)
21.23 (539.2)
21.23 (539.2)
21.23 (539.2)
56 (25.4)
59 (26.8
62 (28.1)
10”W (250 mm) Double-Sided
12”W (300 mm) Single-Sided
40094-X03
40094-X05
40094-X15
Shipping
Weight
lb (kg)
Depth
in (mm)
6”W (150 mm) Double-Sided
10”W (250 mm) Single-Sided
40093-X03
40093-X05
40093-X15
Height
ft (m)
7 (2.1)
7.6 (2.3)
8 (2.4)
21.23 (539.2)
21.23 (539.2)
21.23 (539.2)
69 (31.3)
73 (33.1)
76 (34.5)
12”W (300 mm) Double-Sided
7 (2.1)
7.6 (2.3)
8 (2.4)
21.23 (539.2)
21.23 (539.2)
21.23 (539.2)
75 (34.0)
79 (35.8)
83 (37.6)
X=color; 5=Clear, 7=Black, E=Glacier White. Clear (-5XX) versions have black doors/covers and cable guides.
5-14
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
CCS Combination Cabling Section
Hinged locking door
The CCS Combination Cabling Section offers the best of CPI’s cabling
sections, but with added design features. This cabling section is double-sided
with the front side featuring plastic cable guides (like those used on the MCS
Master Cabling Section,) while the back retains the classic VCS Vertical
Cabling Section design.
• 1U cable guides on the front designed for fanning and managing
patch cords
• Open cabling section on the rear provides easy access and routes
cable bundles feeding into the back of patch panels
• Edge-protected pass through ports make it easy to route cable from
front to back; vertical slots along the center separator secure cable
bundles neatly with optional Saf-T-Grip® Cable Management Straps
• Plastic Cable Guides meet UL 94V-O Flame Resistant standards
• Innovative SwitchGate Door/Cover (front) is easily opened from the
right or left and can be removed so that cable does not have to thread
through guides
• Attach to Standard Racks, Universal Racks, QuadraRack or Adjustable
QuadraRack frames
• Mounting hardware and doors are included
Usable Depth
For 3”D (80 mm) Rack Version:
Front=5.90” (149.9 mm); Rear=5.35” (135.9 mm)
For 6”D (150 mm) Rack Version:
Front=7.40” (188.0 mm); Rear=6.85” (174.0 mm)
Part Number
3”D (80 mm)
Racks
Height
ft (m)
30161-X01
30161-X03
30161-X05
30161-X15
30161-X08
6 (1.8)
7 (2.1)
7.6 (2.3)
8 (2.4)
9 (2.7)
30162-X01
30162-X03
30162-X05
30162-X15
30162-X08
6 (1.8)
7 (2.1)
7.6 (2.3)
8 (2.4)
9 (2.7)
30163-X01
30163-X03
30163-X05
30163-X15
30163-X08
6 (1.8)
7 (2.1)
7.6 (2.3)
8 (2.4)
9 (2.7)
Depth
in (mm)
Shipping
Weight
lb (kg)
Part Number
6”D (150 mm)
Racks
Height
ft (m)
25 (11.3)
29 (13.2)
31 (14.1)
33 (15.0)
38 (17.2)
30164-X01
30164-X03
30164-X05
30164-X15
30164-X08
6 (1.8)
7 (2.1)
7.6 (2.3)
8 (2.4)
9 (2.7)
29 (13.2)
34 (15.4)
37 (16.8)
39 (17.7)
44 (20.0)
30165-X01
30165-X03
30165-X05
30165-X15
30165-X08
6 (1.8)
7 (2.1)
7.6 (2.3)
8 (2.4)
9 (2.7)
40 (18.1)
46 (20.9)
50 (22.7)
53 (24.0)
59 (26.8)
30166-X01
30166-X03
30166-X05
30166-X15
30166-X08
6 (1.8)
7 (2.1)
7.6 (2.3)
8 (2.4)
9 (2.7)
28 (12.7)
33 (15.0)
36 (16.3)
38 (17.2)
43 (19.5)
14.61 (371)
14.61 (371)
14.61 (371)
14.61 (371)
14.61 (371)
33 (15.0)
38 (17.2)
41 (18.6)
44 (20.0)
49 (22.2)
10”W (250 mm)
10”W (250 mm)
12.24 (311)
12.24 (311)
12.24 (311)
12.24 (311)
12.24 (311)
14.61 (371)
14.61 (371)
14.61 (371)
14.61 (371)
14.61 (371)
6”W (150 mm)
6”W (150 mm)
12.24 (311)
12.24 (311)
12.24 (311)
12.24 (311)
12.24 (311)
Shipping
Weight
lb (kg)
3.65”W (92.7 mm)
3.65”W (92.7 mm)
12.24 (311)
12.24 (311)
12.24 (311)
12.24 (311)
12.24 (311)
Depth
in (mm)
14.61 (371)
14.61 (371)
14.61 (371)
14.61 (371)
14.61 (371)
42 (19.1)
49 (22.2)
53 (24.0)
56 (25.4)
63 (28.6)
X=color; 7=Black, E=Glacier White.
5-15
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
CCS-EFX Combination Cabling Section
With Extended Fingers
The CCS-EFX is a double-sided vertical cable management trough designed
for use with most two- and four-post racks to manage cable at the cross
connect, especially when using angled-face copper patch panels.
The CCS-EFX is manufactured from a combination of strong, lightweight
aluminum sheet and plenum-rated composite materials for maximum strength
at minimal weight. CCS-EFX is packaged in a single carton for easy handling
and includes installation hardware.
• Cable openings on the front are sized to fit 48 patch cords, twice the
capacity of the CCS; openings have rounded edges to protect cable
and will not deform or break
• Cable openings on front of CCS-EFX align with rack-mount unit on rack
allowing cables to exit by rack-mount unit
• The front door hinges open to the right or left and locks in the closed
position to protect cables
• Open cabling section on the rear of CCS-EFX allows large premise
cable bundles to exit the manager into the rack-mount space. Spin
closure latches secure cables
• Attach to 3”D (80 mm) Standard Racks, Universal Racks or QuadraRack
• Mounting hardware and doors are included
Extended fingers of
CCS-EFX
Hinged locking door
Part
Number
Height
ft (m)
40098-X03
40098-X05
40098-X15
7 (2.1)
7.6 (2.3)
8 (2.4)
40099-X03
40099-X05
40099-X15
7 (2.1)
7.6 (2.3)
8 (2.4)
40100-X03
40100-X05
40100-X15
7 (2.1)
7.6 (2.3)
8 (2.4)
Depth
in (mm)
Shipping
Weight
lb (kg)
6”W (150 mm)
Usable Depth
Front=8.60” (218.4 mm);
Rear=5.35” (135.9 mm)
14.94 (379.5)
14.94 (379.5)
14.94 (379.5)
38 (17.2)
41 (18.6)
44 (20.0)
10”W (250 mm)
14.94 (379.5)
14.94 (379.5)
14.94 (379.5)
52 (23.6)
56 (25.4)
60 (27.2)
12”W (300 mm)
14.94 (379.5)
14.94 (379.5)
14.94 (379.5)
56 (25.4)
60 (27.2)
64 (29.0)
X=color; 7=Black, E=Glacier White.
5-16
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
Global Vertical Cabling Section
The Global Vertical Cabling Section is an adaptable vertical cable
management solution with a unique, two-piece design that reduces shipping
size and cost. The two parts can be quickly assembled and then bolted to
CPI's Universal and Standard racks, as well as QuadraRack™ and Adjustable
QuadraRack frames. It ships partially assembled with patented cable guide
fingers at 1U intervals. Each single-sided section includes a two-piece
section, a two-piece door/cover and mounting hardware. Each double-sided
section is a one-piece section and two-piece door/cover.
• Patented cable guide fingers at 1U intervals provide an organized pathway
for cable and patch cords
• 7’H (2.1 m) provides 45U
• Snap-on, hinged door/cover hides cable for a finished appearance, yet
allows quick access to cable for making changes
• Door/cover swings on hinges to open left or right
• Acorn nuts eliminate sharp edges, reducing injuries and torn cables
• Seven 2.5” (64 mm) pass-through ports allow cables to transition from front
to back
Part
Number
Description
Shipping
Weight
lb (kg)
Single-Sided GVCS
12831-X03
12833-X03
12830-X03
12832-X03
7’H x 6”W x 6.76”D, Wide
(2.1 m x 150 mm x 171.7 mm)
7’H x 6”W x 9.30”D, Wide
(2.1 m x 150 mm x 236.2 mm)
7’H x 3.65”W x 6.76”D, Narrow
(2.1 m x 92.7 mm x 171.7 mm)
7’H x 3.65”W x 9.30”D, Narrow
(2.1 m x 92.7 mm x 236.2 mm)
19 (8.6)
22 (10.0)
16 (7.3)
18 (8.2)
Double-Sided GVCS
Double-Sided
14831-X03
Single-Sided
14830-X03
7’H x 6”W x 13.52”D, Wide
(2.1 m x 150 mm x 343.4 mm)
7’H x 3.65”W x 13.52”D, Narrow
(2.1 m x 92.7 mm x 343.4 mm)
39 (17.7)
32 (14.5)
X=color: 5=Clear, 7=Black, E=Glacier White. Clear (-5XX) versions have black
doors/covers and cable guides.
Cable Rings For GVCS
Use rings to create a separate cable path on back of Global Vertical Cabling
Section to organize wires for a neat, professional installation. Contains seven
rings.
Rings shown
attached to
GVCS
Part
Number
Black
Glacier White
12836-702
12836-701
5-17
12836-E02
12836-E01
Description
Shipping
Weight
lb (kg)
7 Wide Rings
7 Narrow Ring
5 (2.3)
4 (1.8)
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
Global Standard Pack
The Global Standard Pack is an easy-to-use solution for managing equipment
and cabling at the cross connect. It includes one CPI Standard Rack, a
concrete floor installation kit and one or two CPI Global Vertical Cabling
Sections (GVCS) packaged in a single carton.
Standard Rack
with RMU printed
on rack
The Global Standard Pack shown has two Global Vertical Cabling Sections
used back-to-back on the same side of the rack to create a double-sided cable
manager. Cabling sections can also be mounted on opposite sides of the rack
to create two single-sided cable pathways.
• Numbered rack-mount unit (U) spaces on the rack are printed on the
equipment mounting channels, providing the installer an easy way of
positioning equipment in planned spaces
• Cable openings in Global Vertical Cabling Section align with U on the rack,
allowing cables to exit by U
• Integrated masked grounding studs on the inside of the rack channel for quick
attachment to the Telecommunications Grounding System
• Cable openings have rounded edges to protect cable and will not deform
or break
• Door/cover snaps on and opens to the right or left for easy access to
cables during moves, adds or changes
• Global Standard Pack is UL Listed as a communication circuit
accessory
Part
Number
Description
Width
in (mm)
Shipping
Weight
lb (kg)
57001-X03
(1) Standard Rack, 45U x 19”EIA, UL
(1) GVCS Single-Sided Vertical Cable
Manager, 3.65”W (92.7 mm)
(1) Rack Installation Kit for concrete floor,
1/2” hardware, Zinc
50 (22.7)
57002-X03
(1) Standard Rack, 45U x 19”EIA, UL
(2) GVCS Single-Sided Vertical Cable
Managers, 3.65”W (92.7 mm)
(1) Rack Installation Kit for concrete floor,
1/2” hardware, Zinc
65 (29.5)
57003-X03
(1) Standard Rack, 45U x 19”EIA, UL
(1) GVCS Single-Sided Vertical Cable
Manager, 6”W (150 mm)
(1) Rack Installation Kit for concrete floor,
1/2” hardware, Zinc
52 (23.6)
57004-X03
(1) Standard Rack, 45U x 19”EIA, UL
(2) GVCS Single-Sided Vertical Cable
Managers, 6”W (150 mm)
(1) Rack Installation Kit for concrete floor,
1/2” hardware, Zinc
67 (30.4)
Fingers align with
RMU on rack
Combines a 7’H x 19”W x 3”D
(2.1m x 19”W x 80 mm) Standard Rack,
Global Vertical Cabling Sections and
Concrete Floor Installation Kit into one
convenient shipping container!
X=color: 5=Clear, 7=Black, E=Glacier White. Clear (-5XX) versions include GVCS with
black doors/covers and cable guides. GVCS is 6.76”D (171.7 mm).
5-18
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
Single-Sided Narrow Vertical
Cabling Section
Provides convenient cable run between equipment racks. Conceals cable for a
more attractive installation.
• Bolts to CPI Standard Rack, Universal Rack, QuadraRack 4-Post Frame and
QuadraRack Server Frame
• Includes formed cabling section, lockable cabling latches - 12” (300 mm)
between latches, protective edge guards and mounting hardware
• 3.65”W x 6.38”D (92.7 mm x 162.1 mm); single-sided cable trough
• 9’ (2.7 m) version consists of a 7’ (2.1 m) section and 2’ (0.6 m) extension
11730
Cabling Section, Single-Sided, Narrow
Color
1
2
5
7
Gray
Computer Beige
Clear
Black
E
11584-X02
One-Foot Extension
Glacier White
Height - ft (m)
00
01
02
03
05
15
08
11730
- X
5.6 (1.7)
6 (1.8)
6.6 (2.0)
7 (2.1)
7.6 (2.3)
8 (2.4)
9 (2.7)
XX
Single-Sided Narrow Vertical
Cabling Section Extensions
Adds one or two feet of height to vertical cabling sections, providing a
uniform vertical pathway from ceiling to rack. Mounting hardware
included.
11378-X02
Two-Foot Extension
Part
Number
11584-X02
11730-X03
Single-Sided Narrow
11378-X02
Description
WxD
in (mm)
Shipping
Weight
lb (kg)
One-Foot Extension
3.65 x 6.38 (92.7 x 162.1)
Two-Foot Extension
3.65 x 6.38 (92.7 x 162.1)
3 (1.4)
4 (1.8)
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
5-19
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
Single-Sided Wide Vertical
Cabling Section
Provides convenient cable run between equipment racks. Conceals cable for a
more attractive installation.
• Bolts to CPI Standard Rack, Universal Rack, QuadraRack® 4-Post
Frame and QuadraRack Server Frame
• Includes formed cabling section, lockable cabling latches spaced 12”
(300 mm) apart, protective edge guards and mounting hardware
• 6”W x 6.38”D (150 mm x 162.1 mm); single-sided cable trough
• 9’ (2.7 m) version consists of 7’ (2.1 m) section with a 2’ (0.6 m) extension
11374
Cabling Section, Single-Sided, Wide
Color
11584-X01
One-Foot Extension
1
2
5
7
E
Gray
Computer Beige
Clear
Black
Glacier White
Height
00
01
02
03
05
15
08
11374
11378-X01
Two-Foot Extension
11374-503
Single-Sided Wide
-
X
5’ 6” (1.7 m)
6’ (1.8 m)
6’ 6” (2.0 m)
7’ (2.1 m)
7’ 6” (2.3 m)
8’ (2.4 m)
9’ (2.7 m)
XX
Single-Sided Wide Vertical Cabling
Section Extensions
Adds one or two feet of height to vertical cabling sections, providing a
uniform vertical pathway from ceiling to rack. Mounting hardware
included.
Part
Number
11584-X01
11378-X01
Description
WxD
in (mm)
Shipping
Weight
lb (kg)
One-Foot Extension
6 x 6.38 (150 x 162.1)
Two-Foot Extension
6 x 6.38 (150 x 162.1)
3 (1.4)
4 (1.8)
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
5-20
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
Double-Sided Narrow Vertical Cabling
Section
11781-X02
One-Foot Extension
Provides double-sided 3.65” (92.7 mm) cable run between equipment racks.
Oval ports measuring 1.38” x 2.25” (35.1 mm x 51.2 mm) are spaced at 11.62”
(295.1 mm) intervals along center separator for convenient cable and wiring
pass through. Vertical slots secure optional Saf-T-Grip® Cable Management
Straps for neatly bundled cables.
• Bolts to CPI Standard Rack, Universal Rack, QuadraRack 4-Post Frame and
QuadraRack Server Frame
• Includes formed cabling section, lockable cabling latches spaced 12”
(300 mm) apart, protective edge guards and mounting hardware
• 3.65”W x 12.75”D (92.7 mm x 323.9 mm); double-sided cable trough
• 1.38” x 2.25” (35.1 mm x 57.2 mm) oval pass through ports every 11.62”
(295.1 mm)
• 9’ (2.7 m) version consists of 7’ (2.1 m) section with a 2’ (0.6 m) extension
• Mounting hardware included
Part
Number
Description
ft (m)
Shipping
Weight
lb (kg)
12096-X03
7 (2.1) Double-Sided Narrow
24 (10.9)
12096-X15
8 (2.4) Double-Sided Narrow
27 (12.2)
12096-X08
9 (2.7 ) Double-Sided Narrow
28 (12.7)
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
Double-Sided Narrow Vertical Cabling
Section Extensions
Adds one or two feet of height to vertical cabling sections, providing a
uniform vertical pathway from ceiling to rack. Mounting hardware included.
11782-X02
Two-Foot Extension
Part
Number
11781-X02
12096-X03
Double-Sided Narrow
11782-X02
Description
WxD
in (mm)
Shipping
Weight
lb (kg)
One-Foot Extension 3.65 x 12.75
(92.7 x 323.9)
Two-Foot Extension 3.65 x 12.75
(92.7 x 323.9)
4 (1.8)
7 (3.2)
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White
5-21
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
Double-Sided Wide Vertical
Cabling Section
11781-X01
One-Foot Extension
These space-saving ducts, with locking latches, hold and separate wiring for
a more organized and managed equipment room installation. Provides
convenient cable run between equipment racks. Conceals cable for a more
attractive installation. 2.50” (63.5 mm) diameter ports spaced at 11.625”
(295.28 mm) intervals allow for convenient cable and wiring pass through.
Vertical slots secure optional Saf-T-Grip® Cable Management Straps for neatly
bundled cables.
• Bolts to CPI Standard Rack, Universal Rack, QuadraRack 4-Post Frame and
QuadraRack Server Frame
• Includes formed cabling section, lockable cabling latches - 12” (300 mm)
between latches, protective edge guards and mounting hardware
• 6”W x 12.75”D (150 mm x 323.9 mm); double-sided cable trough
• 2.5” (64.0 mm) diameter pass through ports every 11.62” (295.1 mm)
• 9’ (2.7 m) version consists of a 7’ (2.1 m) section with a 2’ (0.6 m) extension
• Mounting hardware included
Part
Number
Description
ft (m)
Shipping
Weight
lb (kg)
11729-X03
7 (2.1) Double-Sided Wide
30 (13.6)
11729-X15
8 (2.4) Double-Sided Wide
31 (14.1)
11729-X08
9 (2.7 ) Double-Sided Wide
32 (14.5)
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
11782-X01
Two-Foot Extension
Double-Sided Wide Vertical Cabling
Section Extensions
Adds one or two feet of height to vertical cabling sections, providing a
uniform vertical pathway from ceiling to rack. Mounting hardware included.
Part
Number
11729-503
Double-Sided Wide
11781-X01
11782-X01
Description
WxD
in (mm)
Shipping
Weight
lb (kg)
One-Foot Extension 6 x 12.75
(150 x 323.9)
Two-Foot Extension 6 x 12.75
(150 x 323.9)
5 (2.3)
9 (4.1)
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
5-22
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
Cabling Section Cover
Designed to be used on narrow and wide Vertical Cabling Sections to provide
a clean, professional appearance. Available in metal or plexiglass versions;
plexiglass for 7’ (2.1 m) only; in sizes to fit your installation.
• Hides cables
• Provides professional appearance
• Quick attachment and removal
• For use with vertical cabling sections only
Shipping
Weight
lb (kg)
Part
Number
Height
ft (m)
12189-701
7 (2.1)
Plexiglass, Black
8 (3.6)
12664-X02
7 (2.1)
Metal
8 (3.6)
11923-X05
7.6 (2.3)
Metal
4 (1.8)
11923-X15
8 (2.4)
Metal
5 (2.3)
11923-X08
9 (2.7)
Metal
5 (2.3)
Style
3.65”W (92.7 mm)
6”W (150 mm)
12188-701
7 (2.1)
Plexiglass, Black
9 (4.1)
12664-X01
7 (2.1)
Metal
9 (4.1)
11922-X05
7.6 (2.3)
Metal
7 (3.2)
11922-X15
8 (2.4)
Metal
7 (3.2)
11922-X08
9 (2.7)
Metal
8 (3.6)
X=color: 7=Black, E=Glacier White
Finger Snaps Cable Guides
Adding Finger Snaps Cable Guides is a snap. The unique, patented design
provides retrofit cable guides in-between the latches on VCS Vertical Cabling
Sections or CCS Combination Cabling Sections.
• Plastic cable guides that easily retrofit onto CPI VCS Vertical Cabling
Sections or CCS Combination Cabling Sections
• Resilient composite material ensures long lasting, quality construction
• Extra-wide and contoured guides allow smooth transition of the cable
from the horizontal pathway into a CPI cabling section
• 1U cable guides are designed for fanning and managing patch cords or
cables
• Meets UL 94V-O Flame Resistant standards
Description
Shipping
Weight
lb (kg)
12370-001
2 Finger Snaps, Black
1 (0.5)
12370-002
12 Finger Snaps, Black
2 (0.9)
Part
Number
5-23
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
Extended Fingers Bracket
Extended Fingers Bracket provides extra-deep cable management capacity for
applications that require large cable bundles or thick cable.
Extra space also improves cable bend radius management, meeting or
exceeding the needs of the latest Category 5e/6/6a or fiber industry
standards. It is a cost-effective accessory for cable management in specific
areas of the rack, rather than along its entire height.
• It is preassembled in 7U, 9U and 13U heights for mounting directly onto
any industry-standard rack
• Patented cable guide fingers at 1U intervals provide an organized cable
pathway
• Made of durable, flame-retardant (UL 94V-0) plastic for environmental
safety
• Sold individually
1U
Part
Number
Description
Shipping
Weight
lb (kg)
12891-X03
7U
2 (0.9)
12891-X01
9U
4 (1.8)
12891-X02
13U
4 (1.8)
X=color: 7=Black, E=Glacier White.
Horizontal Cable Guides
Rack-Mounted cable guides organize multiple horizontal cable runs. Designed
to use with most rack-mounted panels.
• Slotted loop design makes cable installation and changes quick and
simple
• Made of thick aluminum and black plastic dipped to reduce cable
insulation damage
• Sold in matching pairs
• Threaded side holes allow mounting of vertical cable loop
(P/N 10683-001)
Part
Number
Description
Dim. A
in (mm)
Dim. B
in (mm)
10419-001
One Loop
3.46 (87.9)
4.25 (108.0)
11157-001
Two Loop
5.25 (133.4)
3.88 (98.6)
11154-001
Four Loop
8.60 (218.4)
3.88 (98.6)
11153-001
Six Loop
15.60 (396.2)
3.88 (98.6)
5-24
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
IBM® Style Vertical Cable Loop
Used for vertical cable runs on most rack mounted equipment. Mounts in a
variety of ways to equipment rack or connector panels. 1-1/2” (38 mm) hole
to hole.
• Aluminum construction coated with black plastic to prevent cable
scrapes
• Sold individually or in package of 100
• Mounting hardware not included
Part
Number
Shipping
Weight
lb (kg)
Color
10683-001
Black
1 (0.5)
10683-101
Black, Package of 100
23 (10.4)
Vertical Wire Management Loop
CPI Vertical Wire Management Loops are used to organize patch cords and
cabling. Maintains vertical wire management for one or two racks mounted
together. Mounting hardware not included.
• Does not protrude into rack-mounting space
• Aluminum construction coated with black plastic to prevent damage
to cable jackets
Part
Number
Color
Shipping
Weight
lb (kg)
13079-001
Black
1 (0.5)
Double-Wide Cable Ring
Provides vertical cable management space between racks butted side-by-side
by mounting to the hole pattern across two rack channels. Large size, 2.3”H x
2.8”W x 4”D (58 mm x 71 mm x 100 mm), accommodates larger cable
bundles. Made of thick aluminum with rounded edges to reduce cable
insulation damage. Sold individually or in box of 100. Shipping weight
approximately
4 oz (110 g) each and 25 lb (11.3 kg) for box of 100. Mounting hardware not
included.
• Mounts to hole pattern across two rack channels
• Provides vertical cable management for larger cable bundles
• Use where vertical cabling section is not required
Part Number
Individually
Box of 100
12228-X01
12228-X11
Description
Double-Wide Loop
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
5-25
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
Narrow Cable Ring
Attaches to walls or racks where width is limited. Holds and dresses vertical
cable runs. Mounting hardware not included.
• Made of aluminum with rounded edges to reduce cable insulation
damage
• Narrow Cable Ring is 2.50”H x 1.25”W x 4.00”D
(63.5 mm x 31.8 mm x 101.6 mm)
• Sold individually or box of 100
Part Number
Individually
Box of 100
11228-X01
11228-X11
Description
Narrow Cable Ring
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
Narrow Cable Loop
Use these cable loops to hold and dress cable vertically. Attach to walls or
racks where width is limited. Mounting hardware not included.
• Made of aluminum with rounded edges to reduce cable insulation
damage
• Narrow Cable Loop is 2.50”H x 1.25”W x 4.00”D
(63.5 mm x 31.8 mm x 101.6 mm)
• Sold individually or box of 100
Part Number
Individually
Box of 100
11230-X01
11230-X11
Description
Narrow Cable Loop
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
Cable Distribution Spools
Cable Distribution Spools promote a gradual bend for cable runs to aid in
complying with ANSI/TIA/EIA-568B bend radius requirements (typically 4X the
cable diameter). Routes all types of cabling from horizontal to vertical or
vice-versa.
• The kit includes a #12-24 rack screw and a wood screw for use with
the 4” (100 mm) spool
• Made of high-impact plastic
15002-001
Part Number
Individually
Box of 100
15002-001
5-26
15002-002
Description
in (mm)
4 (100) Cable Spool
CPI: 800-834-4969
VERTICAL CABLE MANAGEMENT
Cable Distribution Spools
Spools mounted on a double-sided
vertical cabling section
Cable Distribution Spools provide slack management and strain relief for
patch cords and jumper cables inside CPI vertical cable managers. Designed
for use inside any CPI double-sided vertical cable manager 10”W and wider,
including VCS, MCS, MCS-EFX, CCS, CCS-EFX and Evolution® g2 Double-Sided
Vertical Cable Manager. Also compatible with Evolution® g1 Single-Sided
Vertical Cable Manager.
• Three large cable distribution spools are included with each 10”, 12” and 15”
wide (250 mm, 300 mm and 380 mm) vertical cable manager (will not fit other
sizes)
• Attaches to the fixed adapter panels on the back of single-sided vertical
cable managers and the Movable Mid-Sections inside the double-sided
vertical cable managers
• Spools are 2.75” (69.9 mm) in diameter and 5.9”L (150 mm) and made from
black plastic
• Each kit includes four spools and mounting hardware
• Made of high-impact, flame retardant material
Description/Color
Shipping
Weight
lb (kg)
15008-001
Spool Kit, Black
2 (0.9)
15008-002
Spool Kit, Computer Beige
2 (0.9)
Part
Number
2” (50 mm) Diameter Fiber Management
Spools
Use the 2” (50 mm) Diameter Fiber Management Spool to support fiber and
copper cables within CPI's extensive line of vertical cabling sections. The
spools meet EIA/TIA bend radius requirements and minimize cable tangles
and tears for more efficient data transmission.
• Provides proper cable support and bend radius for more efficient data
transmission
• Maintains strength under heavy cable loads
• Mounts to all CPI vertical cabling sections 6”W (150 mm) or wider,
including MCS, MCS-EFX, CCS, CCS-EFX and VCS
2” (50 mm) Diameter Fiber Management Spools
Application
Package Shipping
Part
Width
Weight
Number
Of
in (mm)
lb (kg)
12766-X02
12766-X07
For 6, 10 or 12 (150, 250 or 300)
Double-Sided Cabling Sections
For 6, 10 or 12 (150, 250 or 300)
Double-Sided Cabling Sections
2
2 (0.9)
7
5 (2.3)
X=color: 7=Black, E=Glacier White
5-27
CPI: 800-834-4969
HORIZONTAL CABLE MANAGEMENT
Evolution® Horizontal Cable Manager
Use Evolution® Horizontal Cable Managers above and below patch panels and
network switches to organize and store cables. Horizontal managers include
plastic T-shaped cable guides to organize patch cords and jumper cords as the
cords enter and exit the manager to make individual equipment connections. The
snap-on cover matches the door styling on the vertical manager. Swing the cover
up or down to access cables; the cover stays in the open position while cabling.
Three edge-protected, oval-shaped pass-through ports allow patch cords to pass
front-to-rear. Horizontal managers are available in three heights.
• Contoured front door with snap-hinges and longitudinal center feature
contrasting aluminum finish
• Three 1.25”H x 2.12”W (31 mm x 53 mm) edge-protected oval cable
pass-through ports at the rear of the cable manager
• Improved T-shaped cable guides decrease deflection when loaded with
cables, especially important when deploying Cat 6a cable
• Rounded edges on the cable guides protect cables as they enter and exit the
storage space
• Snap-On cover opens up or down and stays in the open position
Part
Number
Description
HxWxD
in (mm)
Shipping
Weight
lb (kg)
35441-X01
35441-X02
35441-X03
35441-X04
1U x 19 x 8.2 (208)
2U x 19 x 8.2 (208)
3U x 19 x 8.2 (208)
4U x 19 x 8.2 (208)
4 (1.8)
5 (2.3)
6 (2.7)
7 (3.2)
X=color: 7=Black, E=Glacier White.
Velocity® Horizontal Cable Manager
Use Velocity® Horizontal Cable Manager above and below patch panels and
network switches to organize and store cables. Features T-shaped cable
guides at the top and bottom of the manager to organize patch cords. Two
cable openings in the rear of the manager allow front-to-rear cabling, and the
snap-on cover stays in the opened position to provide easy access to cables.
The single-sided horizontal cable managers are available in three heights.
• Horizontal managers for open two-post and four-post CPI Rack Systems
• The Velocity Horizontal Cable Manager includes:
- One 19”W EIA rack-mount cable manager with T-shaped cable guides
- One cover that snaps onto the T-shaped cable guides
- Four #12-24 x 1” rack-mount screws and four M6 x 25 mm rack-mount
screws
Part
Number
Description
HxWxD
in (mm)
Shipping
Weight
lb (kg)
13930-701
13930-702
13930-703
1U x 19 x 5.9 (150)
2U x 19 x 5.9 (150)
3U x 19 x 5.9 (150)
2 (0.9)
3 (1.4)
3 (1.4)
Color is black. 1U = 1.75” (44.45 mm); the overall height of the manager is .03” (0.16
mm) less than the full rack-mount unit height. Usable depth is 3.7” (94 mm). The
usable height of the manager varies but is 1.2” (31 mm) less than the overall height
of the manager at the narrowest point.
5-28
CPI: 800-834-4969
HORIZONTAL CABLE MANAGEMENT
Universal Horizontal Cable Manager
Create an attractive and highly functional horizontal pathway for patch cords
and multimedia applications using coax, copper and fiber optic cables. After
routing the cables or cords, simply snap on the cover for a clean, professional
appearance.
• Extra-wide and contoured cable guide fingers, spaced 1.75” (44.5 mm)
apart, separate and organize patch cords for quick and easy moves, adds
and changes.
• The cable guides are offset to ensure proper bending radii of patch
cables, even hooded patch cables
• Patented fingers meet the requirements of UL 94V-0 flammability rating
• Snap-on covers are easy to use and open 180° up or down with
adjacent installation
• Covers and panel have a black powder-coat textured finish, reducing
fingerprints and smudges
30530-X19
Double-Sided Universal Horizontal Cable Manager
Part
Number
Description
HxWxD
in (mm)
Shipping
Weight
lb (kg)
30529-X19
30529-X23
30530-X19
30530-X23
30531-X19
30531-X23
1U x 19 x 11.73 (297.9)
1U x 23 x 11.73 (297.9)
2U x 19 x 11.73 (297.9)
2U x 23 x 11.73 (297.9)
3U x 19 x 11.73 (297.9)
3U x 23 x 11.73 (297.9)
5 (2.3)
6 (2.7)
6 (2.7)
7 (3.2)
6 (2.7)
7 (3.2)
X=color: 7=Black, E=Glacier White.
30130-X19
Single-Sided Universal Horizontal Cable Manager
30330-X19
Use Universal Horizontal Cable Manager in
conjunction with the CPI Patch Panel Wire
Management Bar (P/N 12176-X01) and any
of CPI’s vertical cabling sections for clean,
organized cable management.
Part
Number
Description
HxWxD
in (mm)
Shipping
Weight
lb (kg)
30139-X19
1U x 19 x 4.96 (126.0)
2 (0.9)
30139-X23
1U x 23 x 4.96 (126.0)
3 (1.4)
30130-X19
2U x 19 x 5.14 (130.6)
3 (1.4)
30130-X23
2U x 23 x 5.14 (130.6)
4 (1.8)
30131-X19
3U x 19 x 5.14 (130.6)
4 (1.8)
30131-X23
3U x 23 x 5.14 (130.6)
5 (2.3)
30339-X19*
1U x 19 x 6.26 (159.0)
3 (1.4)
30339-X23*
1U x 23 x 6.26 (159.0)
3 (1.4)
30330-X19*
2U X 19 X 6.44 (163.6)
4 (1.8)
30330-X23*
2U X 23 X 6.44 (163.6)
5 (2.3)
30331-X19*
3U X 19 X 6.44 (163.6)
5 (2.3)
30331-X23*
3U X 23 X 6.44 (163.6)
6 (2.7)
X=color: 7=Black, E=Glacier White. *Note: Deep Panel is used when Double-Sided
MCS Master Cabling Sections are center-mounted on 3”D racks.
5-29
CPI: 800-834-4969
HORIZONTAL CABLE MANAGEMENT
Horizontal Cable Management Accessories
Patch Panel Wire Management Bar
12176-X01
19” rack-mountable bar provides the necessary wire management and strain relief
required by ANSI/TIA/EIA-568-B. May be mounted inward for 6” (150 mm) channel
or outward to standard 3” (80 mm) rack side channel; attaches to rack with
standard #12-24 rack screws (not included). Wire tie holes maintain wire
perpendicular relative to termination point; made of sturdy aluminum and sold
individually.
Horizontal Wire Management Panel for VCS
13070-X19
13075-X19
19” Wire Management Panel is offset 1.5” (38 mm) from the rack channel to
ensure proper bending radii of patch cables, even hooded patch cables. Use in
combination with VCS Vertical Cabling Sections. Unique offset design provides
patch cable pathway from front-to-back or side-to-side. Available in single 1.75”
(44.5 mm) or double 3.5” (89.0 mm) rack-mounting units design. Mounts quickly
and easily using threaded cable distribution spools; cable distribution spools
maintain bend radius through the pass-through trough and across the front plane
of the horizontal manager.
Horizontal Wire Management Panel for MCS and CCS
Use in combination with MCS Master Cabling Section and CCS Combination
Cabling Section to provide open horizontal management for cables.
Clip-On Cable Cover
The Clip-On Cable Cover is designed for use with the CPI 19” Horizontal Wire
Management Panels. Attach to the horizontal wire management panel by simply
sliding/clipping it into place.
12541X19
12542X19
Slip-On Cover, Ring Panel
The Slip-On Cover is used on the Large Horizontal Ring Panel, P/N 11564-XXX.
Sold individually
Description
Shipping
Weight
lb (kg)
12176-X01
Patch Panel Wire Mangement Bar
1 (0.5)
13070-X19
Horizontal Wire Panel for VCS, 1U
2 (0.9)
13075-X19
Horizontal Wire Panel for VCS, 2U
2 (0.9)
12541-X19
Horizontal Wire Panel for MCS/CCS, 1U
2 (0.9)
12542-X19
Horizontal Wire Panel for MCS/CCS, 2U
2 (0.9)
12663-X01
Cable Cover for 13070-XXX, 1U
2 (0.9)
12663-X02
Cable Cover for 13075-XXX, 2U
2 (0.9)
11764-X19
Slip-On Cover, 19”W, for 11564-X19
2 (0.9)
11764-X23
Slip-On Cover, 23”W, for 11564-X23
2 (0.9)
Part
Number
12663-X01
11764-X19
11764-X23
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
5-30
CPI: 800-834-4969
HORIZONTAL CABLE MANAGEMENT
Jumper And Transition Trays
12183 Upper Tray
The Jumper and Transition Trays aid in compliance with ANSI/TIA/EIA-568B
bend radius requirements. Two styles are available to provide upper and
lower horizontal/vertical cable management and promote a gradual,
controlled bend for both UTP and optical fiber cable. Adjust the position of the
bend radius to deliver cables into the vertical cable manager or attach a
transition plate between trays to create a solid wire way between racks.
Mounting screws not included. Sold individually.
• Provides 1-1/2” (38 mm) bend radius for compliant installation of Category
5e/6/6a or fiber cable
• Telescopes to adjust cable entry or exit position
• Mounts on 19” or 23” rack; may also be wall-mounted
• Strong lightweight aluminum construction
Description
Shipping
Weight
lb (kg)
12183-X23
Upper Tray, 3.5”D (89 mm)
3 (1.4)
13183-X23
Upper Tray, 6”D (150 mm)
4 (1.8)
12185-X19
12185-X23
Lower Tray, Single,
3.5”D (89 mm)
4 (1.8)
12187-X19
12187-X23
Lower Tray, Double,
3.5”D (89 mm)
5 (2.3)
12186-X01
N/A
Transition Plate,
15.5”L (394 mm)
2 (0.9)
Part Number
13183 Deep Upper Tray
19”
23”
12183-X19
13183-X19
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
12185 Lower Tray, Single
12187 Lower Tray, Double
12186 Transition Plate
5-31
CPI: 800-834-4969
HORIZONTAL CABLE MANAGEMENT
Rack Radius Drop
The Rack Radius Drop provides a transition from a horizontal cable run onto a
rack, while maintaining the recommended bend radius. Cable bundles are
held securely in place on the Rack Radius Drop by using the included Saf-TGrip® Center Grommet Buckle Cable Management Strap; 9”L (230 mm) for
12392-X09 and 12393-X01 and 6”L (150 mm) for 12392-X06 and
12394-X01 only.
Note: For UTP and STP-A, the required bend radius is no less than four times the
cable diameter. For optical fiber, the required bend radius is either 10 times the
cable diameter or 1.2” (30 mm), whichever is larger (reference BICSI TDDM).
12392-X06
Three styles are available:
1) 3” (80 mm) or 6” (150 mm) rack channels without vertical rack cabling
sections use P/N 12392-X06, 3”(80 mm) or 12392-X09, 6”(150 mm).
2) Single sided vertical rack cabling managers use P/N 12393-X01
3) Double sided vertical rack cabling managers use P/N 12394-X01
• Provides an organized method to transition from horizontal cable run onto
the rack, while maintaining bend radius; styles offered for use with or
without vertical rack cabling sections
• Provides 1-1/2” (38 mm) bend radius
• Quick and easy slip-on installation onto rack channel
• Sold individually
12393-X01
Part
Number
Description
in (mm)
Shipping
Weight
lb (kg)
12392-X06
Rack Radius Drop for 3 (80) Rack Channels
w/o Vertical Cabling Sections
1 (0.5)
12392-X09
Rack Radius Drop for 6 (15) Rack Channels
w/o Vertical Cabling Sections
1 (0.5)
12393-X01
Rack Radius Drop For Use with Single
Sided Vertical Cabling Section
1 (0.5)
12394-X01
Rack Radius Drop For Use with Double
Sided Vertical Cabling Section
1 (0.5)
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
12394-X01
Large Horizontal Cable Ring
This is the same ring used on our Large Horizontal Ring Panel series 11564.
Sold individually and in quantities of 50.
• Provides horizontal cable management on wall
• 2.8”H x 6”W (71 mm x 150 mm) heavy duty aluminum rings
• Rounded edges protect cable sheaths
Description
Shipping
Weight
lb (kg)
Cable Ring
19 (8.6)
Part Number
Each
Box of 50
11563-X01
11563-X50
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
5-32
CPI: 800-834-4969
HORIZONTAL CABLE MANAGEMENT
Large Horizontal Ring Panel
Used to organize horizontal cable runs. Large 2.8”H (71 mm) by 6”W (150 mm)
heavy duty aluminum rings with rounded edges protect cable sheaths and will
not bind during installation. Rings are bolted onto panels, so they can be
added or removed as needed. 19” and 23” wide rack panel options come
pre-assembled with seven equally spaced rings.
• 2.8”H x 6”W (71 mm x 150 mm) heavy duty aluminum rings
• Rings can be added or removed as needed
• Installation hardware not included
• Shipping weight approximately 5 lb (2.3 kg)
Part Number
19”
23”
11564-X19
11564-X23
Description
Ring Panel
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
Rack Cabling Managers
Used to organize horizontal cable and wire runs. Two sizes of slotted plastic
rings provide ample room to hold all types and sizes of wiring and cabling.
• Easy to install on equipment racks
• Installation hardware not included
1175
Rack Cabling Managers
Panel/Ring Size
H x D - in (mm)
2
3
1U, 1.6 x 1.3 (41 x 33) Rings
2U, 3 x 1.6 (80 x 41) Rings
Color
1
2
5
7
E
Gray
Computer Beige
Clear
Black
Glacier White
Rack Width
19
23
1175
5-33
X
-
X
19”W
23”W
XX
CPI: 800-834-4969
SAF-T-GRIP® STRAPS
Saf-T-Grip® Open Loop Series
Used to strap together free hanging computer cable for a tangle-free
installation. Strap is held in place by a loop that adheres to one cable. Simply
peel the hook and loop sides apart to remove strap.
Saf-T-Grip® End Grommet Buckle Series
The buckle design provides extra strength for those harder to manage cables.
Mounts cable along walls and backboards or wherever horizontal cable runs
are required. Wrap this strap around the cable and back through the nylon
buckle. Pull snugly, cinching down the cable for secure fit.
Open Loop Series
Saf-T-Grip® Center Grommet Buckle
Series
The buckle design provides twice the holding strength of ordinary straps.
Unique center grommet feature provides a sturdy fixture for attaching straps
in any direction. Simply loop the strap around cables and back through the
buckle. Secure cinch back and down for a secure hold.
Saf-T-Grip Strap Series Type
020
Open Loop Series (pkg. of 25)
050
End Grommet & Buckle Series (pkg. of 25)
060
Center Grommet & Buckle Series (pkg. of 25)
Strap Length - in (mm)
06
6 (150), for 2 (50) diameter cable bundles
09
9 (230), for 3 (80) diameter cable bundles
12
12 (300), for 4 (100) diameter cable bundles
Strap Width - in (mm)
2
3/4 (19.1)
Strap Colors
Center Grommet & Buckle Series
0X0
XX
5-34
-
X
01
Black
03
Royal Blue
XX
CPI: 800-834-4969
CABLE MANAGEMENT ACCESSORIES
Open Composite Distribution Ring
Supports cable and wire in communication closets, on backboards, equipment
racks or wherever cable runs are required. These rings are made of highstrength, fire-retardant material with rounded edges to prevent damage to
cable and wire insulation, while providing easy pull-through. Mounting hole
configuration allows rings to be attached to most surfaces, including our
equipment racks. The open designed “C’’ rings allow for easy adds, moves
and changes, eliminating the need to feed through cable. Mounting hardware
not included.
• Organizes equipment wiring and cabling
• Strong, lightweight composite construction
• Eliminates cable nicks, great for wire pulling
• Split ring style allows easy additions or changes to cable runs
• Molded of fire-retardant material
Part
Number
Description
Width
in (mm)
Shipping
Weight
lb (kg)
12035-001
2 (50) Open “C” Ring, Gray
1 (0.5)
12035-011
Carton of 100
6 (2.7)
Channel-Mounted Distribution Ring
Designed to mount to the upright channels of CPI Universal Racks. Made of
high-strength, fire-retardant material with rounded edges to prevent damage
to cable and wire insulation, while providing easy pull-through. The opendesign “C’’ rings allow for easy adds, moves and changes, eliminating the
need to feed through cable. Mounting hardware not included.
• Mounts on CPI Universal Racks only
• Organizes equipment wiring and cabling
• Strong, lightweight composite construction
• Split ring style allows easy additions or changes to cable runs
• Molded of fire-retardant material
• Sold individually and in quantities of 100
• Internal dimensions: 2.58” W (65.5 mm) x 3”D (76.2 mm)
• Overall dimensions: 3.58” (90.9 mm) x 3.93” (99.8 mm); projects 3.68”
(93.5 mm) past the sides of the rack channel
Part Number
Description
Shipping
Weight
lb (kg)
11125-011
3 (80) Open “C” Ring, Beige
9 (4.1)
11112-013
3 (80) Open “C” Ring, Black
9 (4.1)
Each
Box of 100
11125-001
11125-013
Shipping Weights are for Box of 100.
11125 shown on Rack
5-35
CPI: 800-834-4969
CABLE MANAGEMENT ACCESSORIES
Closed Composite Distribution Rings
With Distribution Rings, all your wiring and cabling can now be neatly and
easily organized and managed. Designed to support cable and wire in
communication closets, on backboards, equipment racks or wherever cable
runs are required. The versatile brackets are made of high-strength, fireretardant composite material. Rounded edges prevent damage to cable and
wire insulation, while providing easy pull-through. Mounting hole
configuration allows brackets to be attached to most surfaces including our
equipment racks. Color is compatible with most equipment. Mounting
hardware not included.
• Strong, lightweight, fire-retardant composite material construction
• Easy to install onto CPI equipment racks or backboards
• Rounded shape eliminates cable nicks, great for wire pulling
Part Number
Description
Shipping
Weight
lb (kg)
12127-011
2 (50) Closed “D” Ring
6 (2.7)
10812-011
3 (80) Closed “D” Ring
9 (4.1)
Each
Box of 100
12127-001
10812-001
Color is gray. Shipping Weights are for Box of 100.
Metal D-Rings
A convenient and economical way to route, support and secure cables and
jumper wires in terminal closets or wherever cable runs are required.
• Offered in three standard sizes
• Made from 1/8” x 1/2” (3.18 mmm x 13 mm) hot-rolled steel strap with
zinc plating to resist corrosion
• Ring edges are rolled to prevent nicks and scratches in the cable and
wire insulation
• Mounting hardware not included
Part Number
Description
Shipping
Weight
lb (kg)
Each
Box of 100
10941-000
10941-010
Small Rings
16 (7.3)
10942-000
10942-010
Medium Rings
22 (10.0)
10943-000
10943-010
Large Rings
24 (10.9)
Shipping Weights are for Box of 100.
5-36
CPI: 800-834-4969
CABLE MANAGEMENT ACCESSORIES
Nylon
Stand-Off Tie Bracket
These brackets mount to the back of the rack channel to provide a convenient
point to tie-down cable runs.
• Choice of either non-conductive nylon or high strength aluminum
• Either end of the aluminum bracket can be attached to rack, allowing
cabling to run several different ways
• Mounting hardware not included
Part Number
Each
Aluminum
Box of 50
Description
Shipping
Weight
lb (kg)
10001-001
10001-050
1 x 5 (30 x 130), White Nylon
3 (1.4)
10559-X00
10559-X50
1 x 6 (30 x 150), Aluminum
5 (2.3)
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White. Shipping
Weights are for Box of 50.
Cable Strain Relief Bracket
Have you ever pulled cables out of rack-mounted equipment accidentally? Do
you need to maintain a minimum bend radius for your cabling? Our rackmounted cable strain relief is the answer. Made of high-strength aluminum, it
includes ten flexible Saf-T-Grip® Cable Management Straps. This bracket can
be mounted at desired height and depth to position straps right where you
need them. Reusable rivets allow Saf-T-Grips to be added or removed as
required. Aluminum construction.
• Mounting hardware not included
Part
Number
Description
Shipping
Weight
lb (kg)
11570-X19
19” Rack
1 (0.5)
11570-X23
23” Rack
1 (0.5)
X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
Jack Plate Wall-Mounting Bracket
This innovative flush-mount wall board bracket is designed to hold round style
modular jack plate assemblies. To install, simply drill a 2-3/8” (60.33 mm)
diameter hole into dry wall, insert bracket into hole and using a flat blade
screwdriver, tighten patented sure-grip pads to hold securely in place.
Adjustable pads handle most wall sizes up to 1” (25.4 mm) thick. Clear plastic
flush mount design is invisible when installed. Four screws hold pattern to fit
round modular jack rings. Includes two #6-32 machine screws. For AT&T and
Regional Bell Operating Co., use with modular jack plate assemblies such as
Allen-Tel AT218 or Suttle SE-625B2 (not included).
Part Number
Each
20502-002
5-37
Box of 200
Description
20502-022 Jack Plate Wall-Mounting Bracket
Shipping
Weight
lb (kg)
12 (5.4)
CPI: 800-834-4969
CABLE MANAGEMENT ACCESSORIES
Mag-Clips, Medium Sized
The medium sized 17000 and 17100 magnetic clips are designed to hold a
25-pair cable or several electrical cords. Keeps cables within workstation
areas neat and off of the floor to reduce the danger of accidents. Nylon cable
ties can be laced through the four square holes in the top of the 17000 series
to secure additional cables.
Part Number
Description
Shipping
Weight
lb (kg)
17000-X50
Clip With Holes
7 (3.2)
17100-X50
Clip Without Holes
7 (3.2)
Each
Box of 50
17000-X00
17100-X00
X=color: 0=Gray, 1=Computer Beige. Shipping Weights are for Box of 50.
Mag-Clips, Large
This larger clip holds a 100-pair telephone cable or up to 1” (30 mm) diameter
tubing. There are also holes provided to lace additional cords to the top of the
clip. The amount of direct pull required to separate the clips from a painted
steel surface averages 15 lb (67 kg).
Part Number
Each
Box of 25
17500-X00
17500-X20
Description
Shipping
Weight
lb (kg)
Clip
7 (3.2)
X=color: 0=Gray, 1=Computer Beige, 2=White. Shipping Weights are for Box of 25.
Mag-Clips, Wrap-Around Clasp
The wrap-around clasp easily secures a 25-pair cable, approximately 7/16”
(11.113 mm) diameter, or a similar size cable, cord or tubing. The doublemagnetic style has extra clasp-mounting screws allowing them to hold two
cables with the addition of another clasp. Incorporate either a single or
double magnet assembly to provide sufficient holding power.
• Direct pull required to separate these magnets from a painted surface
averages 5 lb (22 kg) for the single magnetic style and 12 lb (53 kg) for the
double magnet style
• Finished in Chem Film over zinc plating
• Extra clasps may be ordered separately
Part
Number
Description
Shipping
Weight
lb (kg)
17250-000
17350-000
17260-001
17260-002
Single Wrap-Around Clip
Double Wrap-Around Clip
Extra Clasps, Small
Extra Clasps, Large
1 (0.5)
1 (0.5)
1 (0.5)
1 (0.5)
5-38
CPI: 800-834-4969
Download PDF
Similar pages