HP Compaq L2206tm 21.5-inch LED Backlit Touch Monitor

HP Compaq L2206tm 21.5-inch LED Backlit Touch
Monitor
QuickSpecs
Overview
1. Menu
Opens, selects or exits the OSD menu.
2. Minus/Volume
If the OSD menu is on, press to navigate
5. Power
backward through the OSD menu and decrease
adjustment levels. If the OSD menu is inactive,
press to activate the Volume adjustment menu.
If the OSD menu is on, press to navigate forward 6. Power LED
through the OSD menu and increase adjustment
levels.
If the OSD menu is inactive, press to activate the
source button that chooses the video signal
input (VGA, DVI, or
DisplayPort).
3. Plus/source
4. OK/auto
If the OSD menu is on, press to select the
highlighted menu item.
If the OSD menu is inactive, press to activate the
auto adjustment feature to optimize the screen
image.
Turns the monitor on or off.
Blue = Fully powered.
Amber = Sleep mode.
Flashing Amber = Sleep Timer mode.
DA - 14367 Worldwide — Version 7 — April 17, 2013
Page 1
QuickSpecs
HP Compaq L2206tm 21.5-inch LED Backlit Touch
Monitor
Overview
Model
B0L55AA
B7F36AA (Head Only)*
*This part number orders a L2206tm 21.5-inch LED Backlit Touch Monitor without a stand. Ships with AC power cable, VGA cable,
DisplayPort cable, DVI-D cable, USB cable, Audio cable, passive 5mm diameter stylus, Display cleaning kit (cloth and solution),
and printed documentation and CD, HP Display Assistant and Pivot Pro software.
DA - 14367 Worldwide — Version 7 — April 17, 2013
Page 2
HP Compaq L2206tm 21.5-inch LED Backlit Touch
Monitor
QuickSpecs
Technical Specifications
Panel
On Screen Display
(OSD) Controls
Type
TN (Twisted Nematic) LED Backlit LCD
Viewable Image Area
54,61 cm. (21.5 in.) widescreen; diagonally measured
Screen Opening
(W x H)
Aspect Ratio
47,66 x 26,81 cm. (18.76 x 10.56 in.)
Viewing Angle (typical)
Up to 170° horizontal/160° vertical (10:1 minimum contrast ratio)
Brightness (typical)*
220 nits (cd/m2)
Contrast Ratio (typical)*
1000:1
Dynamic Contrast Ratio
(typical)*
1,000,000:1
Response Rate (typical)*
5 ms (on/off)
Pixel Pitch
0.248 mm
Backlight Lamp Life*
(to half brightness)
Color Gamut
30,000 hours minimum
Color Gamut (typical)
72%
Over 16 million colors (through FRM)
*All performance specifications represent the typical specifications provided by HP's component
manufacturers; actual performance may vary either higher or lower.
Buttons or Switches
"Menu" "-" "+" "OK" "Power"
Languages
Horizontal Frequency
English, French, German, Italian, Dutch, Spanish, Japanese, Portuguese,
Traditional Chinese, and Simplified Chinese
Brightness, contrast, positioning, color temperature (warm, standard, cool,
custom), image control (clock, clock phase, scaling, sharpness, DCR),
monitor management, volume, source control, information and factory
reset
24 to 94 kHz
Vertical Frequency
50 to 76 Hz
Native Resolution
1920 x 1080 @ 60 Hz
Preset VESA Graphic Modes
(non-interlaced)
Text Mode
1920 x 1080 @ 60 Hz
1680 x 1050 @ 60 Hz
1600 x 900 @ 60 Hz
1440 x 900 @ 60 Hz
1280 x 1024 @ 60 Hz
1280 x 720 @ 60 Hz
1024 x 768 @ 60 Hz
800 x 600 @ 60 Hz
720 x 400 @ 70 Hz
640 x 480 @ 60 Hz
720 x 400 @ 70 Hz
Maximum Pixel Clock Speed
200 MHz (VGA); 170MHz (DVI and DisplayPort)
User Programmable Modes
Yes (10)
User Controls
Signal Interface/
Performance
16:9
DA - 14367 Worldwide — Version 7 — April 17, 2013
Page 3
HP Compaq L2206tm 21.5-inch LED Backlit Touch
Monitor
QuickSpecs
Technical Specifications
Touchscreen
Specification
Anti-Glare
Yes
Default Color Temperature
Standard (6500K)
Touch Technology/interface
Optical Multitouch/USB
Multitouch
2 unambiguous points
Touch Point Response
<8.3ms with dual simultaneous touches
Accuracy
<< ± 2.5mm @ 95% area for 21.5 inches (16:9) LCD
Activation (Touch Input)
Finger, gloved hand, or passive stylus (5mm diameter) included
Stylus (5mm diameter)
Passive, docked in rear bezel (left side)
Touch Certification
Windows 7
NOTES: Full touch functionality supported with Windows® 7 Home Premium, Professional, Enterprise, and
Ultimate operating systems only. Multitouch is not supported in Windows 7 Home Basic or Windows 7 Starter
editions, Windows Vista editions or Windows XP operating systems.
Video/Other Inputs
Audio
Power
Windows 7 Home Premium, Professional, Enterprise, and Ultimate editions support extended display touch
screen functions for two monitors connected to one system. Windows 7 Home Basic and starter editions,
Windows Vista, and Windows XP do not support extend display touch functionality. They support single-touch
functions on the primary monitor only, not the secondary monitor (extended or cloned desktop).
Plug and Play
Yes
Input Connectors
VGA (analog), DVI-D and DisplayPort w/ HDCP, USB 2-port hub
Input Impedance
75 Ohms (VGA)
Sync Input
TTL separate synch
Video/Other Cables
Cable Lengths
(1) (1) DisplayPort cable, (1) DVI-D cable, (1) VGA cable, (1) USB cable, (1)
Audio cable
1,8 m. (5.9 ft.)
Input/Output
(1) Audio in/microphone; (1) Headphone/line out; (1) audio cable included
Speakers
(2) 1W/channel built-in speakers (top firing)
Input Power
100-240VAC 50/60 Hz
Typical Power Consumption
25 W
Maximum
39 W
Power Saving
< 0.5 W standby; < 0.5 W off
Power Cable Length
1,9 m. (6.2 ft.)
Mechanical Slider
Dimensions (H x W x D)
Stand (not included
with Head Only model)
Weight
Tilt Range
Unpacked w/stand
Unpacked (Head only)
51,80 x 22,8 x 34,5 to 44,5 cm
(20.39 x 8.98 x 13.6 to 17.52 in.)
51,8 x 5,36 x 32,31 cm
(20.39 x 2.11 x 12.7 in.)
58,8 x 18,2 x 50,8 cm
(23.1 x 7.16 x 20 in.)
4,6 kg (10.11 lb.)
Unpacked (with stand)
7,0 kg (15.4 lb.)
Packaged (with stand)
Packaged (head only)
9,3 kg (20.5 lb.)
6,9 kg (15.2 lbs)
Unpacked w/o stand
(head only)
Packaged
-5° to + 30°
DA - 14367 Worldwide — Version 7 — April 17, 2013
Page 4
HP Compaq L2206tm 21.5-inch LED Backlit Touch
Monitor
QuickSpecs
Technical Specifications
Environmental
Swivel Range
No
Height Adjustable
Yes - from 0 to 13,0 cm. (0 to 5.1 in.)
Pivot Rotation
Yes
Base
Detachable, ships attached
Temperature – Operating
5° to 35° C (41° to 95° F)
Temperature – Non-operating
-20° to 60° C (-4° to 140° F)
Humidity – Operating
20% to 80% non-condensing
Humidity – Non-operating
5% to 95%, 38.7° C max wet-bulb
Altitude – Operating
0 to 5000 m. (16,400 ft.)
Altitude – Non-operating
0 to 12192 m. (40,000 ft.)
White LED Backlights
Yes
CCFL Panel
No
Arsenic-Free Display Glass
Yes
Low Halogen3
Plastics and Finishes or Paint (excludes external cables)
Mercury-Free Display
Backlighting
Yes
Environmental Data Eco-Label Certifications &
declarations
Energy Consumption
115VAC, 60Hz
This product has received or is in the process of being certified to the
following approvals and may be labeled with one or more of these marks:
IT ECO declaration
TCO 05
230VAC, 50Hz
100VAC, 60Hz
Normal Operation
Sleep
Off
18.9 W
0.4 W
0.3 W
18.8 W
0.4 W
0.3 W
19 W
0.4 W
0.3 W
Heat Dissipation*
115VAC, 60Hz
230VAC, 50Hz
100VAC, 60Hz
Normal Operation
Sleep
Off
Additional
Information
65 BTU/hr
64 BTU/hr
65 BTU/hr
1 BTU/hr
1 BTU/hr
1 BTU/hr
1 BTU/hr
1 BTU/hr
1 BTU/hr
*NOTE: Heat dissipation is calculated based on the measured watts, assuming the service level is attained for
one hour.
This product is in compliance with the Restrictions of Hazardous Substances (RoHS) directive 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and Electronic Equipment (WEEE)
Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of California; Safe Drinking Water and
Toxic Enforcement Act of 1986).
Plastics parts weighing over 25 grams used in the product are marked per ISO 11469 and ISO1043.
This product contains 18% post-consumer recycled plastic (by wt.)
This product is 98.4% recycle-able when properly disposed of at end of life.
DA - 14367 Worldwide — Version 7 — April 17, 2013
Page 5
QuickSpecs
HP Compaq L2206tm 21.5-inch LED Backlit Touch
Monitor
Technical Specifications
Packaging Materials External:
PAPER/Cardboard & misc
1210 g
Internal:
RoHS Compliance
Material Usage
Packaging
End-of-life
Management and
Recycling
PLASTIC/Polyethylene low
25 g
density
Hewlett-Packard is committed to compliance with all applicable environmental laws and regulations, including
the European Union Restriction of Hazardous Substances (RoHS) Directive. HP's goal is to exceed compliance
obligations by meeting the requirements of the RoHS Directive on a worldwide basis. By July 1, 2006, RoHS
substances will be virtually eliminated (virtually = to levels below legal limits) for all HP electronic products
subject to the RoHS Directive, except where it is widely recognized that there is no technically feasible
alternative (as indicated by an exemption under the EU RoHS Directive).
This product does not contain any of the following substances in excess of regulatory limits (refer to the HP
General Specification for the Environment at
http://www.hp.com/hpinfo/globalcitizenship/environment/supplychain/gen_specifications.html):
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants - may not be used as flame retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
Halogenated Diphenyl Methanes
Lead carbonates and sulfates
Lead and Lead compounds
Mercuric Oxide Batteries
Nickel - finishes must not be used on the external surface designed to be frequently handled or carried
by the user.
Ozone Depleting Substances
Polybrominated Biphenyls (PBBs)
Polybrominated Biphenyl Ethers (PBBEs)
Polybrominated Biphenyl Oxides (PBBOs)
Polychlorinated Biphenyl (PCB)
Polychlorinated Terphenyls (PCT)
Polyvinyl Chloride (PVC) - except for wires and cables, and certain retail packaging has been voluntarily
removed from most applications.
Radioactive Substances
Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)
HP follows these guidelines to decrease the environmental impact of product packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury and cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in packaging materials.
Use readily recyclable packaging materials such as paper and corrugated materials.
Reduce size and weight of packages to improve transportation fuel efficiency.
Plastic packaging materials are marked according to ISO 11469 and DIN 6120 standards.
Hewlett-Packard offers end-of-life HP product return and recycling programs in many geographic areas. To
recycle your product, please go to: http://www.hp.com/go/reuse-recycle or contact your nearest HP sales
office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each
DA - 14367 Worldwide — Version 7 — April 17, 2013
Page 6
HP Compaq L2206tm 21.5-inch LED Backlit Touch
Monitor
QuickSpecs
Technical Specifications
Hewlett-Packard
Corporate
Environmental
Information
Options
product type for use by treatment facilities. This information (product disassembly instructions) is posted on
the Hewlett Packard web site at: http://www.hp.com/go/recyclers. These instructions may be used by
recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
For more information about HP's commitment to the environment:
Global Citizenship Report
http://www.hp.com/hpinfo/globalcitizenship/gcreport/index.html
Eco-label certifications
http://www.hp.com/hpinfo/globalcitizenship/environment/productdesign/ecolabels.html
ISO 14001 certificates:
http://www.hp.com/hpinfo/globalcitizenship/environment/operations/envmanagement.html
HP Single Monitor Arm
Part number BT861AA
The flexible design of the HP Single Monitor Arm provides a seemingly
endless range of display adjustments with an amazing 13 inches of lift, 50
degrees of tilt, and 360 degrees of pan and rotation - all at your fingertips -helping you stay comfortable and productive throughout the day.
HP Adjustable Dual
Premium space-saving dual screen solution provides access to more monitor
real estate and makes it possible to manage multiple applications
Display Stand
simultaneously. Weight adjustable for dual monitors from 17-24 inches.
Part Number AW664AA
Rotate displays into portrait/landscape positions.
HP Height Adjustable
A height adjustable stand supporting the L2206tm touch monitor that can
Stand for Touch Monitors replace the standard slider stand to provide greater ergonomic flexibility to
position the touch screen to provide the best touch experience to end users.
Part Number A1X81AA
The stand provides a stable touch platform for either landscape or portrait
orientation of the monitor.
Stand Specifications
Tilt Range
-5 to + 60 degrees
Swivel Range
Height Adjustable
Pivot Rotation
Base and Stand
Dimensions
(W x D x H)
No
Yes, range 177.5 mm
No
Detachable
37,5 x 33,5 x 32 cm
(14.8 x 13.2 x 12.6 in)
Weight
Unpacked 3,25 kg (7.17 lbs)
Packaged 4,63 kg (10.21 lbs)
HP Slider Stand for
L2206tm - Part number
B7F51AA
Color
Black
The standard slider stand with tilt, height and pivot adjustment which ships
with the standard L2206tm (part number B0L55AA).
HP LCD Monitor Quick
Release
Part number EM870AA1
An easy-to-use, VESA-compliant, LCD monitor mounting solution that allows
you to quickly and securely attach an LCD monitor to a variety of stands,
brackets, arms or wall mounts.
HP Integrated Work
Center Stand - USDT and
Thin Clients)-Part number
LH526AA
Allows mounting of a 17 - 24 inch diagonal HP LCD monitor and an HP Compaq
dc8000 series Ultra-slim Desktop PC as well as select HP Thin Clients on a
single stand for the convenience of an "all-in-one" form factor. For more
information, refer to this product's QuickSpecs document.
DA - 14367 Worldwide — Version 7 — April 17, 2013
Page 7
HP Compaq L2206tm 21.5-inch LED Backlit Touch
Monitor
QuickSpecs
Technical Specifications
HP Integrated Work
Center for Small Form
Factor - Part number
QK549AA
The HP Integrated Work Center Stand allows you to easily attach a 17- to 24inch HP LCD monitor and an HP Compaq dc7900, 8000, 8000f Elite or 6005
Pro Ultra-slim Desktop PC or HP Thin Client on a single stand for the
convenience of an "all-in-one" form factor. For more information, refer to the
product's QuickSpecs.
HP USB Graphics Adapter Enables connection of up to six simultaneous displays to help you boost
productivity and multi-task across several open applications. Use one Adapter
Part number NL571AA
to bridge between a notebook or desktop PC and second monitor or use
multiple Adapters to connect several displays to each other.
HP Business PC Security Attaches to the rear of the PC with a six-foot steel cable that can be used to
secure a PC or peripherals such as mice, keyboards, monitors or USB security
Lock Kit
devices to protect them against unauthorized removal by physically
Part number PV606AA
connecting the system to an anchor point.
HP DisplayPort Cable Kit Connects a DisplayPort connector on an HP Business Desktop computer to a
DisplayPort connector on a monitor
Part number VN567AA
What's in the box?
Monitor and accessories
Documentation
Featured Software
Other
HP Compaq L2206tm 21.5-inch LED Backlit Touch Monitor, AC Power cable,
VGA cable, DisplayPort cable, DVI-D cable, USB cable, Audio cable, Passive
5mm diameter stylus, Display cleaning kit (cloth and solution)
Printed documentation and CD
Color
HP Display Assistant is a software utility that enables theft deterrence and
allows monitor adjustment, color calibration, and security/asset
management using the Display Data Channel Command Interface (DDC/CI)
protocol of the connected PC or workstation.
Pivot Pro Software enables a user with a rotating display to easily and
instantly switch from landscape to portrait mode, and back.
English, S. Chinese, T. Chinese, Bahasa Indonesia, Japanese, Korean, Brazilian
Portuguese, French, Spanish (International), Kazakh, German, Russian
English, S. Chinese, T. Chinese, Bahasa Indonesia, Japanese, Korean, Brazilian
Portuguese, French, Spanish (International), Kazakh, German, Russian
Black
VESA External Mounting
Yes (one set of standard 4-hole pattern, 100 mm).
Security Lock-Ready
Yes
User Guide Languages
Warranty Languages
Certifications and
Compliance
CAS and IEC 60950-1 Second Edition, TCO 5.2, CEL Grade 1, CB, CE, TUV-GS, ISO 13406-2, CSA, FCC, EPA,
GOST, NOM, TUV-S, VCCI, KC/KCC, PSB, ISC, BSMI, C-TICK, CCC, CECP, SEPA, CEL, E-standby
Compatibility
Compatible with platforms using the VESA standard video modes. Recommended for use with HP
products.
Protected by HP, including a 3 year standard limited warranty. Optional Care Pack Services are extended
service contracts which go beyond your standard warranties.2
Service and Warranty
DA - 14367 Worldwide — Version 7 — April 17, 2013
Page 8
HP Compaq L2206tm 21.5-inch LED Backlit Touch
Monitor
QuickSpecs
Technical Specifications
© Copyright 2013 Hewlett-Packard Development Company, L.P.
1 The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting
surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the
VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction professional to
determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting
solution is properly installed to support applied loads.
2 HP Care Pack Services extend service contracts beyond the standard warranties. Service levels and response times for HP Care Packs
may vary depending on your geographic location. Service starts from date of hardware purchase. To choose the right level of service
for your HP product, use the HP Care Pack Services Lookup Tool at http://www.hp.com/go/lookuptool. Additional HP Care Pack
Services information by product is available at http://www.hp.com/hps/carepack.
3External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not be
Low Halogen.
All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either
higher or lower. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
DA - 14367 Worldwide — Version 7 — April 17, 2013
Page 9
Download PDF
Similar pages