struction
anual
DIGITAL AUDIO
_w
www.samsgng.com
AK68-01002A-00
Warning
TO REDUCE THE RiSK OF ELECTRIC SHOCK DO NOT
.......,_.,_
REMOVE THE COVER(OR BACK).
¢_
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
This symbol indicates "dangerous voltage"
inside the product that presents a risk of
electric shock or personal injury.
Caution: FCC regulations state that any unauthorized
changes or modifications to this equipment may
void the user's authority to operate it.
This symbol indicates important instructions
This unit can be used only where the power
supply is AC I20V, 60Hz. It cannot be used
elsewhere.
accompanying the product.
NOTE
Do not install this equipment in a confined space such as a
bookcase or similar unit.
This DVD Recorder is designed and
manufactured to respond to the Region
Management Information.
If the Region number of a DVD disc does
not correspond to the Region number of
this DVD Recorder, the DVD Recorder
cannot play the disc.
WARNING : To prevent damage which may result in fire or
electric shock hazard, do not expose this appliance to rain
or moisture.
CAUTION : DVD RECORDERS USE AN INVISIBLE
LASER BEAM WHICH CAN CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE RECORDER CORRECTLY AS
INSTRUCTED.
CAUTION
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELR REFER SERVICING TO QUALIFIED
PERSONNEL.
This device is protected by U.S. Patent
Nos.4,631,603;4,577,216;4,819,098;4,907,
093; and 6,516,132.This product
incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights.Use of
this copyright protection technology must
be authorized by Macrovision,and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision.Reverse
engineering or
disassembly is prohibited.
f
DANGER
-
VISIBLE AND INVISIBLE
LASER RADIATION
AVOID DIRECT EXPOSURE
TO BEAM.
WHEN
OPEN.
Caution: To prevent electric shock, match wide blade of
plug to wide slot, fully insert.
Attention: Pour eviter les chocs electriques, introduire la
tame la plus large de la fiche dans la borne correspondante
de la prise et pousser jusqu au fond.
This product satisfies FCC regulations when shielded
cables and connectors are used to connect the unit to other
CAUTION
-
VISIBLE AND INVISIBLE
LASER
AVOID EXPOSURE
TO BEAM.
WHEN
OPEN.
A*TFENTION
-
RAYONNEMENT LASER VISIBLE ST INVISIBLE EN CAS SOUVERTURE,
ADVARSEL
-
SYNLIG
UNDG,_
VARO
t
-
AVATTAESSA
OLET ALTTIINA
NAKYVAA
JA NAKYMATON
LASERS,_,TEILYLLE.
b,L,k KATSO S,kTEESEEN.
VARNING
-
SYNLIG OCH
/_R OPPNAD.
equipment. To prevent electromagnetic interference with
electric appliances, such as radios and televisions, use
shielded cables and connectors for connections.
ADVARSEL
-
SYNLIG
UNNG/_
VORSICHT
-
SICHTSAREUNDUNSICHTBARELASERSTRAHLUNG,
GEOFFNET NICHT BEM STBAHL AUSSETZEN
CAUTIONS
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
2 - English
RADIATION
EXPOSITION DABGEREUSE AU EAISCEAU.
OG USYNLIG
UDS/ETTELSE
LASERSTRi_,LING
FOR STRALING.
VED _,BNING.
OSYNLIG
LASERSTRALNING
BETRAKTA
EJ STRALEN.
OG USYNLIG
EKSPONERING
LASBRSTR,&LING
FOR STR,_,LEN.
N,_R SENNA
NAR DEKSEL
DEL
APNES.
WENNABBECKUNG
• Be careful not to put your hand into the disc tray.
Precaution
• Do not place anything
tray.
other than the disc in the disc
• Exterior interference such as lightning and static
electricity can affect normal operation of this
recorder. If this occurs, turn the recorder off and on
again with the POWER button, or disconnect and
then reconnect
outlet.
| important Safety instructions
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future
reference.
1)
2)
3)
4)
5)
6)
7)
the AC power cord to the AC power
The recorder will operate normally.
• Be sure to remove the disc and turn off the recorder
after use.
• Disconnect the AC power cord from the AC outlet
when you don't intend to use the recorder for tong
periods of time.
• Clean the disc by wiping in a straight
inside to the outside of the disc.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings, Install in
accordance with the manufacturer's instructions.
| Maintenance
line from the
of Cabinet
For safety reasons, be sure to disconnect
power cord from the AC outlet.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two
blades with one wider than the other. A groundingtype plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety, if the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories
specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as a power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
| Handling Cautions
• Do not use benzene,
the AC
thinner, or other solvents
for
cleaning.
• Wipe the cabinet
with a soft cloth.
| Disc Handling
• Use discs with regular
shapes. If an irregular disc
(a disc with a special
shape) is used, this DVD
Recorder may be damaged.
• Avoid touching
the surface
disc where recording
performed.
DVD-RAM,
tJ
X
of a
is
DVD-RW and DVD-R
= Clean with an optional
DVD-RAM/PD
disc cleaner (LF-K200DCA1
where
available).Do not use cleaners or cloths
for CDs to clean DVD-RAM/DVDRW/DVD-R discs.
DVD-Video,
CD
• Wipe off dirt or contamination
cloth.
on the disc with a soft
. Before connecting other components to this
recorder, be sure to turn them all off.
. Do not move the recorder while a disc is being
played, or the disc may be scratched or broken,
the recorder's internal parts may be damaged.
• Do not put a flower vase filled with water or any
small metal objects on the recorder.
Cautio
.oQ_handl
_ ' discs
and
• Do not write on the printed side with a ball-point
or pencil.
pen
English - 3
• Do not use record cleaning sprays or antistatic.
do not use volatile chemicals, such as benzene
thinner.
• Do not apply labels or stickers
discs fixed with exposed
peeled-off stickers.)
• Do not use scratch-proof
Also,
or
to discs. (Do not use
tape adhesive
protectors
or leftover
Be careful not to harm the disc because
the data on
in a cool ventilated area.
vertically.
in a clean protection jacket.
move your DVD Recorder suddenly
from a
cold place to a warm place, condensation
may
generate on the operating parts and lens and cause
abnormal disc playback. When this occurs, do not
connect the plug to the power outlet. Wait for two
hours, then insert the disc and try to playback again.
It will work properly when condensation has
evaporated.
| Disc Specifications
, A digital versatile disc (DVD) can contain up to 135minutes of images, 8-language audio and 32 subtitle
languages. It is equipped with MPEG-2 picture
compression and Dolby 3D surround sound, allowing
you to enjoy vivid and clear theater quality images in
the comfort of your own home.
• When switching from the first layer to the second
layer of a double-layered
DVD Video disc, there may
be momentary distortion in the image and sound.
This is not a malfunction of the unit.
• Once a DVD-R/-RW recorded in Video Mode is
Audio
it becomes
DVD-Video.
size of progressive
• MOTION
JPEG is not supported.
JPEG is 3M pixels.
• Use a 700MB(8O minutes) CD-R/-RW disc.
If possible, do not use a 80OMB(90 minutes) or
above disc, as the disc may not play back.
• If the CD-R/-RW disc was not recorded as a closed
session, you may experience a delay in the early
playback time, and all recorded files may not play.
• Some CD-R/-RW discs may not be playable with this
unit, depending on the device which was used to
burn them.
For contents recorded on CD-R/-RW media from
, An audio disc on which 44.1 kHz PCM Audio
recorded
may vary
DVD-R Disc Pla
• Once a DVD-R recorded
it becomes DVD-Video.
,,,,,
in Video Mode is finalized,
• You can record onto the available
space on the disc
and perform editing functions such as giving titles to
discs and programs and erasing programs before
finalizing.
• When programming
is erased from a DVD-R, that
space does not become available. Once an area on
a DVD-R is recorded on, that area is no longer
available for recording,
erased or not.
whether
the recording
is
• It takes about 30 seconds for the unit to complete
CD
is
• Plays CD-DA format audio CD-R and CD-RW discs.
The unit may not be able to play some CD-R or CDRW discs due to the condition of the recording.
CD-P,/-RW
• Only CD-R discs with MP3 files recorded with
ISO9660 or JOLIET format can be played back
4 - English
folders.
• Maximum
CDs for your personal use, playability
depending on contents and discs.
DVD-Video
finalized,
folders.
• Only JPEG files with the ".jpg", ".JPG" extension can
be used.
• The unit can handle a maximum of 1000 files and
these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
Keep
Store
Keep
If you
• For MP3 files recorded with a VBR(Variable
Bit
Rates), from 32 Kbps to 320 Kbps, the sound may
cut in out.
or cracked discs.
| Disc Storage
•
•
•
•
".MP3" extension
• Playable bitrate range is from 56Kbps to 320Kbps.
• The unit can handle a maximum of 1000 files and
or covers.
• Do not use discs printed with label printers available
on the market.
• Do not load warped
• Only MP3 files with the ".mp3",
can be used.
recording
finishes.
management
information
after recording
• This product optimizes the DVD-R for each
recording. Optimizing is carried out when you start
recording after inserting the disc or turning on the
unit. Recording onto the disc may become
impossible if optimizing is carried out too many
times.
• Playback may be impossible
the condition of recording.
in some cases due to
• This unit can play back DVD-R discs recorded and
finalized with a Samsung DVD video recorder. It may
not be able to play some DVD-R discs depending on
the disc and the condition of the recording.
This DVD Recorder can allow you to protect the
DVD-RW Disc Pla
contents of your discs, as described below.
• Recording and playback can be performed on DVDRW discs in both the Video and VR Modes.
, Program-protected:
• Once a DVD-RW
, Disc-protected:
See page 73 "Locking a Title"
See page 85 "Disc Protection"
recorded in VR Mode or Video mode
is finalized, you cannot perform addtional recording.
• Once a DVD-RW recorded in Video Mode is finalized,
it becomes DVD-Video.
;{."DVD-RAM/DVD-RW/DVD-R
• In both modes, playback can be performed before and
after finalization, but additional recording, deleting and
;!: For more information
editing can not be performed after finalization.
• If you want to record the disc in VR Mode and then
record in V Mode, be sure to execute Format.
;{-"If poor quality DVD-RW/DVD-R
Be careful when executing Format because all the
recorded data may be lost.
• A DVD-RW blank disc is initialized to VR Mode when
first initialized.
• DVD-RW (VR mode)
- This is a format that is used for recording data on a
DVD-RW disc. You can record multiple titles, edit,
delete, partial delete, create a playlist, etc.
- A disc that is recorded in this mode wilt not play in
standard DVD players.
• DVD-RW (Video mode)
- This is a format that is used for recording data on a
DVD-RW or DVD-R disc. The disc can be played by
an existing DVD player once it has been finalized.
- If a disc that has been recorded in Video Mode by a
different maker's recorder but has not been finalized,
it cannot be played or additionally be recorded by
this recorder.
incompatible
discs that are
with the DVD-VIDEO
format cannot be
played with this product.
on DVD recording compatibility,
consult your DVD-RW/DVD-R
recordings
_not
manufacturer.
discs are used, your
may fail.
use t he fo!,!_,!ng
discs!
, LD, CD-G, CD-I, CD-ROM and DVD-ROM discs
should not be used in this product.
[Note]
Disc types that can be played :
CDICD-RICD-RWIMP31JPEGIDVD-VideolDVDRAM/DVD-RW/DVD-R.
DVD+Rt+RW
cannot record, but the finalized +Rt+RW
can be played.
For a DVD-R/DVD-RW
disc, which has been recorded
in Video Mode on another component,
when finalized.
, Some commercial
it can play only
discs and DVD discs purchased
outside your region may not be playable with this
product. When these discs are played, either "No
disc." or "Please
check the regional code." will be
displayed.
, If your DVD-RW disc is an illegal copy or is not in
DVD video format, it may also not be playable.
• DVD-RAM
discs come with or without a cartridge.
For this product, we recommend DVD-RAM discs that
come without cartridges.
• You cannot play a DVD-RAM in most DVD players
due to compatibility issues.
• Only DVD-RAM standard Version 2.0. discs can be
played in this unit.
• For cartridge type DVD-RAM discs, remove the
cartridge and use the disc only.
Protection
High Speed Recording
discs can be used in this unit.
, Not all brands of discs wilt be compatible
unit.
, The latest firmware
with this
upgrade to improve recording &
playback quality can be downloaded
from our web
site. (Download Center at www.samsung.com)
, If disc compatibility problems continue, or there is an
issue upgrading your recorder, contact the Call Center
at 1-800-SAMSUNG.
• Many DVD discs are encoded with copy protection.
Because of this, you should only connect your DVD
Recorder directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
• This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited
English - 5
Connectingto your TV ..........................
Contents
21
Connectingto a stereoamplifierwith analog
inputjacks ...................................
22
Connectingto an AV amplifierwith a digital
inputjack ....................................
Step 4 : Connecting External Devices ...........
Getting
24
Connectinga VCR, Set-TopBox(STB)
Started
Warning ...................................
2
Precaution .................................
3
ImportantSafety Instructions ......................
3
Handling Cautions ..............................
3
Maintenanceof Cabinet ..........................
3
Disc Handling..................................
3
Disc Storage ..................................
4
Disc Specifications..............................
4
General Features
23
...........................
or DVD Player to the AV 1 IN jacks ................
24
Connectinga Camcorderto the AV 2 IN jacks .......
25
Connectinga Camcorderto the DV IN jack ..........
26
Step 5 : Connecting the Power Cord ............
27
Step 6 : Preparing the Remote Control ..........
27
System
Setup
Using the Setup Menu .......................
28
Initial Setup ...............................
29
8
Before Reading the Instruction Manual
..........
9
1. OSD Language Setup ........................
29
9
2. Clock Set ..................................
29
11
3. Channel Set ................................
31
Front Panel ..................................
11
4. Setting Up the Audio Options ...................
32
Front Panel Display ............................
11
Rear Panel ...................................
12
How to use the DVD Recorder
.................
Description ................................
Unpacking ................................
12
Accessories ..................................
12
Tourof the Remote Control ......................
13
Connect!n9
& Settin
5. Setting Up the TV Aspect .....................
System Setting
............................
CM Skip Time Setting ...........................
35
EP Mode Time Setting ..........................
36
AutomaticChapter Creation ......................
36
Quick RecordingSetting ........................
37
Language Setting
UP
..........................
Video (Display) Setting
......................
Parental Control ............................
Quick Overview ............................
34
35
38
39
40
14
Step I : Connecting the Antenna cable
.........
Antenna + DVD Recorder + TV : No Cable box ......
15
15
Antenna + Cable box + DVD Recorder+ TV :Cable box
with many scrambled channels ...................
16
Antenna + DVD Recorder + Cable box +TV : Cable box
with a few scrambledchannels ...................
Step 2 : Connecting the Video Cable
...........
17
18
Before
Recording
..........................
43
Recordable discs ..............................
43
Recording Formats
44
............................
Record Mode .................................
44
Connectingto a Video inputjack ..................
18
Unrecordable video
............................
44
Connectingto an S-video inputjack ...............
19
About INFO button .............................
45
Connectingto Componentvideo inputjacks(Y,PB,PR) 20
Step 3 : Connecting the Audio cable ............
6 - English
21
Checking the available disc space
(Disc Information) ..............................
45
Deleting a Section of a Title
Recordingthe currentTV programyou are
watching .................................
45
Advanced
Editing(Playlist)
.....................
74
...................
76
Recordingfrom External Equipment ............
47
Creating a Ptaylist .............................
Copying from a Camcorder ...................
48
Playing Entries in the Ptaylist
Makinga One Touch Recording(OTR) ..........
49
Setting a Timer Recording ....................
50
FlexibleRecording(for Timer Recordingonly) .... 51
Editingthe ScheduledRecord List .............
51
Deletingthe ScheduledRecord List ............
52
Recordingthe ScheduledRecord List ...........
53
Playing .............................
78
Editing a Scene for the Ptaylist
79
54
Disc types that can be played
54
....................
Discs that cannot be played ......................
.............................
Using the Disc Menu & Title Menu
82
Deleting a Ptaylist Entry from the Playlist ............
83
................
56
56
Slow Motion Play ..............................
57
Step Motion Play ..............................
57
About ANYKEY
57
...............................
......................
60
Selecting the Audio language
....................
60
Changing the Camera Angle
.....................
61
Zooming-in ...................................
61
Using Bookmarks
62
.............................
Using Markers ................................
Audio
CD/MP3
Picture
Playing the
Title
CD
84
84
Disc Protection ................................
85
Formatting a Disc ..............................
85
Deleting All Title Lists ...........................
86
Finalizing a Disc ...............................
87
Unfinalizing a Disc (VNR mode)
88
.................
Troubleshooting............................
89
Solutionto Error Message ....................
93
Specification ..............................
95
Warranty .................................
96
63
...................
Playing an Audio CD (CD-DA)/MP3
Playing a
.............................
58
Selecting the Subtitle ...........................
Playing an
Manager
Editing the Disc Name ..........................
54
55
Using the Search Functions ......................
Using the Repeat Function
...................
Copying a Playlist Entry to the Playtist ..............
54
Region code (DVD-Video only) ...................
Playing a Disc
77
Renaming a Ptaylist Entry .......................
Disc
Before
....................
76
...............
64
64
........................
67
List .........................
68
Basic Editing (Title List) ......................
72
Renaming(Labeling)a Title ......................
72
Locking(Protecting)a Title .......................
73
Deletinga Title ...............................
73
English - 7
High quality progressive
GeneralFeatures
Progressive
free video.
scan
scanning provides high resolution and flicker
The 10-bit 54-MHz DAC and 2D Y/C Separating Circuitry
provides the highest video playback and recording quality.
(See page 20.)
The DVD-R130 allows you to record and play high quality
digital video on DVD-RW/DVD-R discs. You can record
and edit digital video on DVD-RW/DVD-R discs as if they
were VCR tapes.
High quality digital
and playback
audio
and video recording
Record up to 8-hours of video or images with a 4.7 GB
DVD-RW/DVD-Rdisc, depending on the recording mode.
Selectable
Record
Mode
You can set your recorder to one of five different recording
speeds, each varying in recording quality and length. EP
mode yields the most recording time, LP & SP modes
provide less recording time with higher quality recording,
and XP mode gives you the highest quality recording.
There's also the FR (Flexible Recording) mode that lets
you record with the best picture quality possible for the
recording time and remaining space on the disc in timer
recording.
Automated Quality Adjustment for Timer
Recording
If FR mode is selected, the video quality is adjusted
automatically so that all video for the scheduled time can
be recorded onto the free disc space. (See page 51 .)
Create a DVD video title using a DVD-RW/DVD-R
disc
With the DVD-R130, you can create your own DVD video
title on 4.7 GB DVD-RW/DVD-Rdiscs.
Copying data from a digital camcorder using
a DV input jack
Record digital camcorder video onto DVD-RW, DVD-R
discs using the DV input jack (IEEE 1394-4pin). (See
page 48.)
8 - English
A
variety
user
of functions
with an
easy-to-use
interface
The integrated menu system and the messaging function
allow you to perform desired operations both easily and
conveniently. With a DVD-RW disc, you can edit recorded
images, create a ptaylist, and edit video in a specific
sequence according to your requirements.
Howto usethe BVD
Recorder
Before
Reacling
the
:l°st,u
cti0.¸¸M :,
Make sure to check the following before reading the
user's manual.
Icon
Term
Definition
This involves
DVD
RAM
RW
R
CD
discs
available
that have been
recorded
and finalized
in Video
This involves
Mode.
a function
available
a function
available
This involves
in DVD-R.
a function
available
This involves
a function
available
in DVD-RAM
This involves
in DVD-RW.
in a data
in a data
4,
CD (CD-R
This involves
JPEG
a function
in DVD or DVD-R/DVD-RW
This unit can record on the following types of discs.
If you want to repeatedly record on the same disc
or you want to edit the disc after recording, select a
rewritable DVD-RW type disc.
If you want to save recording without any change,
choose a non-rewritable DVD-R.
or CD-RW).
a function
picture
available
CD(CD-R
or
CD-RW).
Unlike a VCR, the recorder automatically starts
formatting when an unused disc is inserted. This is
required for the preparation
This involves
MP3
CD(CD-R
on which
MP3 is recorded).
function
settings
by using
one button.
that can be operated
ANYKEY
Using a DVD-RW
This type of disc can be formatted in either DVDVideo format (Video mode) or DVD-Video Recording
format (VR mode). For an unused disc, a message
that asks whether to initialize or not is displayed.
You can play a Video mode disc in standard DVD
players. AVR mode disc allows more varied
editing.
help each
that can be operated
only
A function
button
or
operate.
A function
by using
a
tips or instructions
on the page that
function
where
does not operate
may be cancelled.
This involves
NOTE
or CD-RW
a case
of disc recording.
available
in a data
This involves
Caution
a function
button.
1) Be sure to be familiar with Safety Instructions before
using this product. (See pages 2~3)
2) If a problem occurs, check the Troubleshooting.
(See pages 89~92)
Using a DVD-R
This type of disc can be formatted in DVD Video
format.
After formatting is complete, you can record on the
disc.
You can play this type of disc on various DVD
components only when they have been finalized.
NOTE
You can only use either the VR or Video
mode on a DVD-RW_ but not both at the
same time.
You can change the DVD-RW format to
another format by reinitializing.
It should be noted that the disc's data will
be lost when changing formats.
© 2006 Samsung Electronics Co.
All rights reserved; No part or whole of this user's manual
may be reproduced or copied without the prior written
permission of Samsung Electronics Co.
English - 9
ii'il
:i'll
There are two different recording methods,
Direct
Recording and Timer Recording. Timer recording is
classified as a Date : Once(mm/dd),
MON-FRI,
Every SAT, etc. as a record mode : XP (high quality
To play your DVD on other DVD components,
finalizing may be necessary. First, finish all editing and
recording operations, then finalize the disc.
mode), SP (standard quality mode), LP (long
recording mode), and EP (extended mode)
When using a DVD-RW
disc in VR Mode
according to the record mode. When recording is
Although finalizing is generally unnecessary when
set in the FR mode, the best quality picture is
playing the disc on a VR Mode compatible
recorded with regards to the remaining time on the
component, a finalized disc should be used for
playback.
When using a DVD-RW
disc in Video Mode
The disc should be finalized first to enable playback
on anything other than this recorder. No more editing
or recording can be made on the disc once it has
been finalized.
Y
When using a DVD-R disc
You can select the title you want to play in a
displayed
menu and then immediately
You should finalize the disc to play it on a component
other than this recorder. You cannot edit or record on
start
playback.
A DVD consists of sections called titles, and sub
sections called chapters.
During recording, a title is created between two
points where you start and stop recording. Chapters
will be created automatically
when you finalize
recording on DVD-R / DVD-RW discs in Video
mode. The chapter's length (interval between
Editing on discs is easier than editing on conventional
video tapes. The recorder supports many different edit
functions, possible only with DVDs.
With a simple and easy edit menu, you can operate
various edit functions, such as delete, copy, rename,
lock, etc., on a recorded title.
Creating a playlist (DVD-RW in VR mode)
With this recorder, you can create a new ptaylist on
the same disc and edit it without changing the original
recording.
%..., .......................................................................................................................................................................................................
,.J_
10 - English
Description
G"3
Front panel
_D
O
e
1. POWER
on and off.
Go to the next title/chapter/track,
2. AV 2 iN
Connects
external
external
to the previous
8. STOP
equipment.
digital equipment
with a DV
Stops disc playback.
9. PLAY/PAUSE
Plays a disc or pauses
10. P.SCAN
Opens to accept
5. OPEN/CLOSE
Selects
11. REC
Displays
a disc.
the disc tray.
the playing
or goes back
title/chapter/track.
jack. (such as a camcorder)
4. DiSC TRAY
Opens and closes
6. DISPLAY
|
tO
7. SEARCH
Turns the recorder
Connect
3. DV-IN
O
playback.
the progressive
scan mode.
Starts recording.
status, time, etc.
12. CH (v/',)
Select TV channels.
Front Panel Display
1. Lights when a disc is loaded.
2. Lights in the record mode.
3. Lights to indicate the timer record
4. Lights when a DVD-R/-RW/-RAM
loaded.
mode.
5. Alpha/Numeric
display.
6. Lights in the progressive
disc is
scan mode.
English - 11
| Rear Panel
@
6 oo
1. DIGITAL AUDIO OUT(OPTICAL)
Connects to an amplifier having a digital optica!
audio input jack.
6. COMPONENT VIDEO OUT(best video quality)
Connect to equipment having Component video
input jacks.
2. DIGITAL AUDIO OUT(COAXIAL)
Connects to an amplifier having a digital coaxial
7. AV 1 AUDIO IN
audio input jack.
3. AV AUDIO OUT
Connect the output of external
audio cables
using audio cables.
Connects the output of external
a video cable.
9. AV 1 S-VIDEO
4. AV VIDEO OUT(good video quality)
Connects the input of external equipment
Video cable.
using a
5. AV S-VIDEO OUT(better video quality)
Connects the input of external equipment
an S-Video cable.
using
audio/video
connection
signals.
TV, you must connect
12 - English
accessories
below.
using
equipment
using
10. ANT IN/ANT OUT (TO TV)
Connect antenna cables.
The Antenna
| Accessories
equipment
IN
Connects the output of external
an S-Video cable.
NOTE
for the supplied
using
8. AV 1 VIDEO IN
Connect to the audio input of external equipment
Check
equipment
does not pass
To watch
a DVD on your
audio/video
cables.
12. TITLE LIST/DISC MENU Button
Tour of the RemoteControl
Use thisto enter the View Recording list/Disc menu.
13. ANYKEY Button
28_
Use this to view the status of the disc that is being played.
14. REC Button
27--
Use to make a recordingon DVD-RW/-R discs.
--
16
17
15. REC MODE Button
Use this to set the desired Recordingtime and picture quality.
(XP/SP/LP/EP)
16. SUBTITLE Button
Press this to switch the DVD's subtitle language.
18
3
4_
5_
6-7_
8--
To open and closethe disc tray.
18. ANGLE Button
--
19
20
9
10--
17. OPEN/CLOSE Button
--
21
22
19. PLAY/PAUSE Button
Press to play/pause a disc or pause the recording.
20. CH Button
Use this to select a TV channel.
21. AUDIO Button
Use this to access various audio functions on a disc.
22. RETURN Button
23. PLAY LIST/TITLE MENU Button
12_
13--
--
14--
--
15--
Use this to return to the Title menu, or to view the recorded
23
24
25
24. CANCEL Button
26
25. TIMER Button
Piaylist.
Press to directly enter the Timer Recording Mode menu.
26. INFO Button
This will display current setting or disc status.
27. REPEAT Button
Allows you to repeat a title, chapter, track or disc.
1. POWER Button
2. NUMBER Buttons
3.100+ Button
Pressthistoselect channet 100or higher.
4. REVERSE/FORWARD SKIP Buttons
Pressto skip a disc backwards or forwards.
28. REPEAT A-B Button
Allows you to repeat a certain section.
29. ZOOM Button
30. INPUT SEL. Button
Selects line input signet in external input mode. (Tuner,AV1,
AV2 or DV)
5. REVERSE/FORWARD STEP Buttons
Pressto play frame by frame.
6. REVERSE/FORWARD SEARCH Buttons
Press to search a disc backwards or forwards.
7. STOP Button
Pressto stop a disc or to stop the recording.
8. CM SKIP Button
The unit can be setto automaticallyskip a portion of the
program during playback of a DVD disc.
9. MARKER Button
Usethis to bookmarkor mark a position while playing a disc.
10. MENU Button
Brings up the DVD recorder's setup menu.
11. ENTER/DIRECTION Buttons
(UP/DOWN and LEFT/RIGHT Buttons)
This buttonfunctions as a toggle switch.
English - 13
erringUp
This section
connecting
_nvolves various
methods
the DVD Recorder
components
and setting
A Quick Overview
you enough
presented
information
in this guide will give
to start using the recorder,
of
to other external
required
initial modes.
Step 1: Connecting the Antenna CabJo
T
Stop 2 : Connecting the Video Cable
T
step3:
connocttho
ng
A.d C
o ob o
T
Step 4 : Connecting ExternaJDevices
T
Stop 5: Connectingthe Power Cord
T
Step 6 : Preparingthe RemoteControJ
Quick Overview .............................
Step 1 : Connecting theAntenna
Cable ........
15
* Note to CATVsystem
installer:
: This reminder
provided to call CATV system installer's attention
Article 820-40 of the National Electrical Code
Step 2 : Connecting the Video Cable
..........
18
Step 3 : Connecting the Audio Cable
..........
21
Step 4 : Connecting External Devices ..........
24
Step 5 : Connecting the Power Cord ...........
27
(Section 54 of Canadian Electrical Code, Part I),
that provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall
be connected to the grounding system of the
Step 6 : Preparing LheRemote Control .........
27
building as close to the point of cable entry as
practical.
14 - English
is
to
There
areseveral
ways
toconnect
your
DVD
Recorder.
Select
oneoftheAntenna
connections
onthefollowing
pages.
| Antenna + DVD Recorder + TV : No Cable box
You can record non-scrambled channels by selecting
watch channels without cable box.
the channel on the DVD Recorder. Also use this method if you
Wall
RFCable
@C2
TOANT IN
/
TOANTOUT
NOTE
The VHF/UHF ANT (RF) OUT jack of this
product sends only signals received through
the antenna. It does not output Audio/Video
signals. You must connect Audio/Video cables
to view Video from the unit.
(i.e. DVD playback)
English - 15
| Antenna + Cable box + DVD Recorder + TV : Cable box with many scrambled
channels
'7;
_,;_
You can record channels by selecting the channel on the cable box. You cannot record one channel while watching
another channel. Be sure that the cable box is turned on.
Wall
Cab _ pox
TO ANT IN
TOANT OUT
NOTE
The VHF/UHF ANT (RF) OUT jack of this
product sends only signals received through
the antenna. It does not output Audio/Video
signals. You must connect Audio/Video cables
to view Video from the unit.
(i.e. DVD playback)
16 - English
| Antenna + DVD Recorder + Cable box + TV : Cable box with a few scrambled
channels
You can recora non-scramolea
channels Dy selecting
the channel on the DVD Recorder. You cannot record scrambled
channets that require a cabte box.
Wall
TO ANTIN
"TOANTOUT_I _
Cable box
NOTE
The VHF/UHF ANT (RF) OUT jack of this
product sends only signals received through
the antenna. It does not output Audio/Video
signals. You must connect Audio/Video cables
to view Video from the unit.
(i.e. DVD playback)
English - 17
_ i i iiiiiiii iiiiiiii iiiiiiii iiiii iii iiiiiiii iiiiiiii i_i
,¸¸¸¸¸¸
::i
There are several ways to connect your DVD Recorder. Select one of the video connections
The VHF/UHF
audio/video
RF OUT jack of this product sends only signals received through the antenna.
signals. You must use one of the following
;::; _._ | Connecting
_.;_
audio/video
connections
It does not output
on this unit.
to a Video input jack
Connect a video(yellow)
cabte between the VIDEO(yellow)
OUT jack on DVD Recorder and VIDEO(yellow)
the TV (or AV amplifier).
_ AUDIO_
R
Red
hi
AudioNideo
Cable
• You will enjoy normal quality images.
• Connect audio cables(white
and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on your TV(or AV amplifier).
(See pages 21 ~ 23)
18 - English
on the following pages.
VIDEO
_Yellow
IN jack on
| Connecting to an S-Video input jack
Connect an S-Video cable(not
supplied)
between the S-VIDEO
OUTjack
on DVD Recorder and S-VIDEO
IN jack on
your TV (or AV amplifier).
111_.141_1
S-VIDEO
S-Video
Cable
mo[suppl_eo_
4
• You will enjoy high quality images. S-Video separates
S-Video or Component video outputs are
the picture element into black and white (Y) and color
(C) signals to present clearer images than regular
video input mode.
• Connect audio cables(white
and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
NOTE
available only if your TV supports S-Video
input or Component video input, respectively.
If S-Video or Component video output does
not work, check the TV connections and the
TV input selection settings.
IN jacks on IV(or AV amplifier).
(See pages 21 ~ 23)
English - 19
Connecting to Component video input jacks (Y,PB,PR)
P.SCAN
Comoooenl
Cable
not suoo lea
I. Connect Component
video cables(not supplied)
between the COMPONENT
OUT(Y, PB,PR)jacks on
DVD Recorder and COMPONENT
on your TV (orAV amplifier).
IN(Y, PB,PR)jacks
2. If the connected TV supports Progressive
press the RSCAN
=
Progressive Scan Output (480p)
Not all high definition television sets are fully
compatible with this product If the 480p progressive
scan picture is not satisfactory,press the P.SCAN
button on the unit to switch to the Interlace mode
Scan,
Progressive
(480p) / Interlace (480i) scan mode in turn.
• You will enjoy best quality accurate
video separates
color reproduction
the picture
element into black and white(Y), blue(PB), red(PR)
signals to present clear and clean images.
• Connect audio cables(white
and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV(or AV amplifier).
(See pages 21 ~ 23)
20 - English
Compared to standard interlaced video, progressive
scan doubles the amount of video lines fed to your
TV, resulting in a more stable, flicker-free, and clear
image than interlaced video The progressive scan
video output jack is used in progressive output
mode This is only available with TVs that support
progressive scan
button on the front of the DVD
Recorder to enjoy best quality video.
Pressing the P.SCAN button switches
images. Component
=
NOTE
If there are questions regarding TV set compatibility
with this model, please contact our customer
service center at 1-800-SAMSUNG
There are several ways to connect your DVD Recorder. Select one of the audio connections on the following pages.
| Connecting
This connection
to your TV
will use your TV's speaKers
mm
'r]'
Audio
Cable
_14i
English - 21
Connecting to a stereo amplifier with analog input jacks
If your stereo amplifier only has AUDIO iNPUT jacks(L and R), use the AUDIO OUT aCKS.
m
t'il.],
@@
Audio
Cable
ANALOGAUDIO
[ll_[:ll_l
22 - English
| Connecting to an AV amplifier with a digital input jack
If your AV amplifier has a Dolby Digital or DTS decoder and a digital input jack, use this connection.
To enjoy Dolby
Digitat or DTS sound, you will need to set up the audio settings, (See pages 32~33)
iii
Optical Cable
Coaxial Cable
(notsupplied)
(notsupplied)
AVamplifier
__x_
Jo_
oOo®l---n
!
c'ot_tlL
_.x_
Rollt/Ri
SU_'_00IeT
Dig;mlAud_
I!l_l:llltl
Cet_te_
Laboratories.
"Dolby" and the double-D symbol are
( "DTS" and "DTS Digital Out" are trademarks
Digital Theater
.........
Systems,
of
Inc.
/f'
English - 23
i i iiiiiiii iiiiiiii iiiiiiii iiiii iii iiiiiiii iiiiiiii ii,¸i¸¸¸
This allows you to connect your DVD Recorder to other external
devices and view or record their outputs.
| Connecting a VCR, Set-Top Bo×(STB) or DVD Player to the AV 1 IN jacks
_:;
_:_
Connecting
a VCR or external
device
to the AV1
IN jacks
of the DVD Recorder.
;,:_' _;:_: You can record from connected equipment (VCR, STB or DVD Player).
o
€_
@@
AudioNideo
Cable
S-VideoCable
(not supplied)
_-_
or --_
I
.CR
STB
_AUDIO
24 - English
_
VIDEO
S-VIDEO
| Connecting a Camcorderto the AV 2 iN jacks
You can also use the AV 2 IN jacks on the front panel of the DVD Recorder. You can record from connected
equipment, such as a camcorder.
When an input source is inserted into AV 2 while watching TV, the input will be switched to AV 2 automatically.
!
Audio/Video
Cable
!
VIDEO
L A[JDIO_
I! [ll4ll]ltl
Csmcordet
English - 25
Connecting a Camcorder to the DV iN jack
If your camcoraer
nae a DV ou_pu_.tacK, connec_ it _o the DV nput jack of. our DVD Recorder.
m
DV Cable
Camcorder (See page 48)
,,
NOTE
the DV input
=
26 - English
If the input is not selected automatically, press the
INPUT eEL. button on the remote control to select
Check your camcorder's owner's manual to see
how to use the camcorder in this mode
Step5:Connectingthe
PowerCor
After all connections
in the walt outlet.
are complete,
plug the power cord
"Auto" appears in the panel display. This means
that the current time is being set automatically
(Auto Program) through the antenna under
connection and also the channel is being set.
The setup may take a few minutes.
When the DVD Recorder operates normally, the current time
is automatically set and displayed in the front pane] display.
NOTE
= After the current time is set automatically, the
recorder will perform Auto Channel Memory for
about 3 minutes, tf power is on before finishing
the Auto Channel Memory process, Auto
Channel Memory wilt stop.
In this case, do Auto Channel Memory from
MENU(see page 31).
Step6: Preparingthe
Remot
control .......
Install
Batteries
in the Remote
Control
* Open the battery cover on the back of the remote.
* Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
, Replace the battery cover.
if the remote control does not operate properly:
* Check the polarity + - of the batteries (Dry-Cell)
, Check if the batteries are drained.
, Check if remote sensor is blocked by obstacles.
* Check if there is any fluorescent lighting nearby.
Dispose
of batteries
regulations.
according
to local environmental
Do not put them in the household
trash.
English - 27
Usingthe SetupMenu
ystem
For ease of use, we recommend that you perform the initiat
setup before using the product.
With
thebutton
unit inonStop
Disc mode, press the
MENU
the mode/No
remote control.
Menu items differ depending on the disc type.
Select Setup using the _"
ENTER or _ button.
buttons, then press the
Setup menu will be displayed.
=
=
=
System
Setup of the General Options.
- CM SkipTime,EPModeTime,ChapterCreator,Quick Recording
Clock Set
-Auto Clock Set, Manuat Clock Set
Channel Set
- Antenna/CableTV,Auto ChannelMemory,Chanel Add/Delete
Language
Setup of the Language Options.
-Audio, Subtitle, Disc Menu, On-Screen Menu
Audio
Setup of the Audio Options
- Digital Output, DTS, Dynamic Compression
Video
Using the Setup Menu ...................................................... 28
Initial Setup .....................................................
29
System Setting ..................................................
35
Language Setting ................................................................38
Video (Display) Setting ......................................................39
Parental Control ....................................................................
28 - English
Setup of the Display Options. Use to select which type of
screen you want to watch and several display options.
- TV Aspect, Input Level, Black Level, 3D Noise Reduction
Parental Control
Setup of the Parental Level
Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as those
with violence, adult subject matter, etc.
- Password, Rating Level,Change Password
With
thebutton.
unit in Stop mode/No Disc mode, press the
MENU
If you connected an external Audio System, turn on your
Audio System and select AUX, CD or DVD.
The OSD (On-Screen Display) displayed on the screen
may vary depending on conditions such as the disc type
and whether the disc has been inserted or not.
| 1. OSD Language
Setup
After plugging in the recorder, the first time you press the
POWER button, the screen shown below appears.
Select
using the AT
ENTERSetup
or _" button.
buttons, then press the
Press the POWER button.
"1_]jI
Select
ClockorSet
using the ,_T buttons, then press
the
ENTER
_ button.
Clock Set menu will be displayed.
Press a number button to select the language.
NOTE
m If the language for the start@ screen is not set,
the settings may change whenever you turn the
power on or off. Therefore, make sure that you
select the language you want to use.
| 2. Clock Set
This menu is used to set the current time. You need to
set the time first to use timer recording.
You must
have the antenna/cable
connected
Select Auto Clock Set using the ,_
press the ENTER or _, button.
to
buttons, then
set the Auto Clock. See pages 15_17 for
Antenna connections(Method
1, 2 and 3).
The Menus are slightly different depending on
whether a disc is inserted or not. The menus
NOTE
If you have the antenna connected via Method 1 or 3 on
pages 15,17, the DVD Recorder automatically sets the
clock by searching for a channel that carries a time
signal and sets your time zone and daylight saving(if
applicable).
described on the next few pages are with no
disc in the unit.
The menus are not available during playback
or recording.
If you have the antenna connected via Method 2 on
page 16, you have to set the clock manually.
See "Manual Clock set" on pages 30.
English - 29
Select the sub menu(Clock
Data CH, Time Zone
or Daylight Saving) using the AY buttons, then
press the ENTER or D,-button.
If your clock cannot be set automatically,
manually.
set the clock
Select Manual Clock Set using the ,&Y buttons,
then press the ENTER or _,- button.
Clock
Data CH
Select a channel that carries a time signa! using the
• .Y buttons then press the ENTER button.
• Select Auto to set the clock data channel automatically.
5
Select the current date and current time (Month,
Day, Year, Hour, Minute and AM/PM) using the
• .Y4 _- or number buttons and then press the
ENTER button.
Time
When the current time is stored in memory and then
the set is powered off, the current time will appear in
the front panel display.
Zone
Select the time zone of your area using the AY
then press the ENTER or _- button.
* Select Automatic
buttons
to set the time zone automatically.
AY
: Sets the value
You can set the value using the number (0-_9)
buttons.
Daylight
Saving
Select Yes, No or Automatic
using the AY
then press the ENTER or _- button.
* Select Automatic
automatically.
30 - English
to set the daylight saving
buttons,
_1 _: Moves to items
| 3. Channe( Set
You can set the Antenna/Cable
5
Select Antenna
or Cable TV(depending
hookup you've selected)
using the AY
on the
buttons,
then press the ENTER or _ button.
If you have the antenna connected via Method 1 or 3 on
pages 15, 17, select Antenna. Otherwise, select Cable
TV.
TV settings automatically.
WithMENU
the unit
in Stop mode/No Disc mode, press
the
button.
6
Select Setup using the AV
the ENTER or _, button.
Select Auto Channel
Memory
using the _,T
buttons, then press the ENTER or m,,button.
Auto Channel Memory will be displayed.
The memorizing process may take a few minutes.
buttons, then press
"1_]jI
Select Channel Set using the AY
press the ENTER or _, button.
buttons, then
NOTE
If you want to stop Auto Channel Memory,
press the ENTER button.
The confirmation message wilt be displayed.
Select YES using the *_ _- buttons, then press
the ENTER button
Select Antenna/Cable TV(Signal Source) using the
AT buttons, then press the ENTER or D,-button.
English - 31
| 4. Setting Up the Audio Options
Manuat Channel Set can be used after you have
performed Auto Channel Memory.
Use the Manual Channel Setting to delete unnecessary
channels after finishing the Auto Channet Memory
You can connect the DVD-R130 to an external audio
amplifier or a Home Theater system.
Allows you to setup the audio device and sound status
settings depending on the audio system in use.
process.
WithMENU
the unitbutton
in Stop
mode, press
the
on mode/No
the remoteDisc
control.
Select Channel Add/Delete using the ,&Y
buttons, then press the ENTER or _,- button.
5
Select
Setup orusing
the ,&Y buttons, then press
the
ENTER
_,- button.
Select the channels you want to add or delete on
the "Select channel" screen using the ,&Y or
number buttons. Then, press the ENTER button.
• Using CH G Q buttons for channel selection allows
the user to add/delete one channel at a time.
• Using Ay buttons for channel selection jumps to
the next channel memorized in Auto Channet
Memory.
6
Select Add or Delete using the _1 _,-buttons,then
press the ENTER button.
• The message 'Channel is added.' or 'Channel is
deleted.' will be displayed in the center of the
screen.
• Continue to add or delete as many channels as you
want to memorize or delete. This can be used to
add channels not stored automatically due to weak
signal strength.
• Press the RETURN button to return to the previous
menu. Press the MENU button to exit the menu.
32 - English
Select
Audio or using
the ,&_
the
ENTER
_, button.
buttons, then press
Dynamic
Compression
This is only active when a Dolby Digital signal is detected.
Select the sub menu(Digital
Output, DTS,
Dynamic Compression)
using the AY buttons,
then press the ENTER or _- button.
Select
the item that
matches
connection
you've seiected
21~23(Method
1, 2 and 3).
Digital
the audio
on pages
Output
• PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM if your amplifier system is stereo and/or
Dolby Prologic.
• On : When movie soundtracks are played at low volume
or from small speakers, the system can apply
appropriate compression to make low-level content more
intelligible and prevent dramatic passages from getting
too loud.
• Off : You can enjoy the movie with standard Dynamic
Range.
5
Select the desired item(PCM, Bitstream,
Off, DTS-On, Dynamic Compression-Off
Dynamic
buttons
Compression-On)
DTSor
using the AY
Then press the ENTER or _ button.
• Bitstream : Outputs bitstream (original format) such as
Dolby or DTS.
Select bitstream if your amplifier system has multi
channel digital audio surround decoding (Dolby Digital
and/or DTS).
= Press the RETURN or _ button to return to
_or'E
the previous menu.
Press the MENU button to exit the menu.
DTS
• On : Outputs DTS bitstream. (via Digital Audio
Output)
Select DTS when connecting to a digital amp with
DTS decoder.
• Off : Doesn't output DTS bitstream (original format).
• When DTS soundtrack
is played, sound is not output
from Analog Audio Output.
English - 33
| 5.
Setting Up the TV Aspect
Select the desired item(4:3 Letter Box, 4:3 PanScan or 16:9 Wide) using the Ay buttons.
Then press the ENTER or _, button.
This allows you to set up the TV screen settings.
With
the unit
in Stop mode/No Disc mode, press
the MENU
button.
If you have a 4:3 standard
TV
• 4:3 Letter Box : Select when you want to see the
total 16:9 ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
Select Setup using the ,&Y buttons, then press
the ENTER or _,-button.
• 4:3 Pan-Scan
Select
Videoor using
the ,&V buttons, then press
the ENTER
_, button.
: Select this for a conventional
size TV
when you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie picture
will be cut off.)
If you have a wide screen TV or 4:3 standard TV
with a wide-screen mode
Select TV Aspect using the A'V buttons, then
press the ENTER or _,- button.
34 - English
• 16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
Select CM Skip Time using the AT
press the ENTER or _ button.
buttons, then
CM Skip Time will be displayed.
| CM Skip Time Setting
When a program recorded on a DVD-RAM, a DVD-RW,
or a DVD-R is played, the unit can be set to
automatically skip a portion of the program
corresponding to a CM(commercial)
Skip Time set by
the user.
Select the desired time using the AT
press the ENTER or _ button.
buttons, then
if you press the CM SKiP button during playback, the
section corresponding to the set time is skipped, and
then the next section is played.
Select
using the AT
ENTERSetup
or _ button.
buttons, then press the
You can't use the Setup functions while playing a disc.
g
CM Skip can be performed
normal playback.
g
When the time set is less than a remaining
time of a current title: The next title is
played from the beginning.
g
When the time set is less than a remaining
time of a playlist, the next scene is played.
g
CM Skip does not work
mode.
g
When a set time is less than a remaining
time of a scene, a last title, or a last track
that is displayed currently, a prohibition
mark appears.
g
CM Skip releases Repeat (including
Repeat A-B, Chapter, and Title).
g
CM Skip may not operate
Video discs.
NOTE
Select
using the AT
ENTERSystem
or _ button.
System menu will be displayed.
buttons, then press the
only during
in a still picture
with some DVD-
English - 35
| EP Mode Time Setting
You can set the EP (Extended
8 hours.
Select the desired time using the A_' buttons, then
press the ENTER or I_ button.
Play) mode's time to 6 or
With
a disc button
insertedon and
unit in
Stop mode, press
the MENU
the the
remote
control.
| Automatic
Chapter Creation
This function works for DVD-RW
discs only.
Select Setup using the A_' buttons, then press the
ENTER or 1_button.
(Video) and DVD-R
With
a disc button
inserted
unit in
Stop mode, press
the MENU
on and
the the
remote
controI.
You can't use the Setup functions while playing a disc.
Select System
using the A_' buttons, then press the
ENTER
or 1_button.
Select
using the A_
ENTERSetup
or 1_ button.
buttons, then press the
You can't use the Setup functions while playing a disc.
System menu will be displayed.
Select EP Mode Time using the A_' buttons, then
press the ENTER or _- button.
Select System
using the A_' buttons, then press the
ENTER
or 1_ button.
EP Mode Time will be displayed.
System menu will be displayed.
36 - English
Select Chapter Creator using the AT
press the ENTER or _ button.
buttons, then
Chapter Creator items will be displayed.
| Quick Recording
Setting
It takes about 10 seconds for a disc to load (initialize)
every time you turn on the unit. To bypass this
initialization process, you can set the Quick Recording
feature to On. This enables you to record immediately
without having to wait for the disc to load.
With
a disc button
inserted
unit control.
in Stop mode, press
the MENU
on and
the the
remote
5
Select On using the AT buttons, then press the
ENTER button.
• Off : Select this option when you do not want to create
chapters.
• On : Select this option when you want to create
chapters.
Select
using the AT buttons, then press the
ENTERSetup
or 1_ button.
You can't use the Setup functions while playing a disc.
"1_]jI
g
NOTE
g
Set the chapter creator to on and then
start recording. Stopping the recording will
automatically
create a chapter menu.
This function only works for normal recording.
- After the recording has begun, the "Do you
want to create the chapter menu after this
recording?" message appears for 10 seconds.
Select Yes or No.
Select
using the AT buttons, then press the
ENTERSystem
or 1_ button.
System menu will be displayed.
- Selecting Yes will create a new chapter menu
while selecting No will not.
g
- A new chapter is created according to the
selected recording mode. A chapter witl be
about 5 minutes long in XP and SP, and about
15 minutes long in LP and EP mode.
To display the created chapters, finalize
the disc and then press the DISC MENU
button. The chapters menu appears.
Select Quick Recording using the AT buttons, then
press the ENTER or 1_button.
Quick Recording menu will be displayed.
g
CAm"ON
The Automatic Chapter Creation function
does not work during Timer Recording or
when you turn the power off.
English - 37
Select
the AT buttons, then press the
ENTEROnor using
I_ button.
Select
using the AT buttons, then press the
ENTERLanguage
or 1_button.
Languagesetup menuwilt be displayed.
NO_E
The Quick
default.
Recording
is set to Off as
,Ķ ¸
'i/
ii!
_ _!!_i
'_
4
If you set the On-Screen menu, Disc menu, Audio and
Subtitle language in advance, they will come up
automatically every time you watch a movie.
If the selected language is not recorded on the disc, the
original pre-recorded language is selected.
Select the sub menu(Audio, Subtitle,Disc Menu,
On-Screen Menu) and press the ENTER or I_ button
using the AV buttons.
• Audio:For thedisc audio language.
• Subtitle : For the discsubtitles.
• Disc Menu : Forthe disc menucontainedon the disc.
• On-Screen Menu : For the unit menu of your DVD recorder.
Select
the ENTER
desired or
language
using the A_' buttons, then
press the
I_ button.
With
unit inonStop
Disc mode, press the
MENUthebutton
the mode/No
remote control.
Press the RETURN
Select Setup
using the A_' buttons, then press the
ENTER
or I_ button
38 - English
NOTE
or _ button
to return
to the previous menu.
Press the MENU button to exit the menu.
The selected language will only appear if it
is supported on the disc.
Select the sub menu(TV Aspect,Input Level,
Black Level, 3D Noise Reduction) using the AT
buttons, then press the ENTER or _ button.
TV Aspect:
see page 34
Input Level:
Adjusts the level of the input signal.
This allows you to set up the IV screen settings.
• Darker : If you feel the screen is too light and you
want to make the screen darker.
• Lighter : If you feel the screen is too dark and you
want to make the screen lighter.
Black Level: Adjusts
Select Setup
using the AT
ENTER
or _ button.
the black level of the screen.
buttons, then press the
• 0 IRE : Select this when you want a darker screen.
Select
ENTERVideo
or I_ using
button.the AT
buttons, then press the
• 7.5 raRE: Select this when you want a lighter screen.
Video option menu will be displayed.
g
NOTE
Black level function
progressive
is not available
in the
scan mode.
English - 39
3D Noise
Reduction (motion
adaptive
noise
reduction)
The Parental Control function works in conjunction with
DVDs that have been assigned a rating - which helps you
control the types of DVDs that your family watches. There
are up to 8 rating levels on a disc.
• On : Provides a cleaner picture through noise
reduction (for recording).
• Off : Normal
With
thebutton
unit inonStop
Disc mode, press the
MENU
the mode/No
remote control.
Use the AT
buttons to select the desired item. Then
press the ENTER or _ button.
Press the RETURN
or 4 button to return
to the previous menu.
Press the MENU button to exit the menu.
IRE: Short for the Institute
of Radio
Engineers, An IRE unit is a relative unit of
measure equaling 1/140th of the peak-topeak (p-p) video
amplitude.
Select
using the AT
ENTERSetup
or _ button.
buttons, then press the
Select Parental Control using the AT
press the ENTER or _ button.
40 - English
buttons, then
4
The first time the Parental Control is accessed, the
| Setting the Rating Level
'Create the Password' message will be displayed.
Create a 4-digit password using the 0 to 9 buttons on the
remote control.
Select Rating
Level using the AT buttons.
The Re-enter Password screen appears to confirm
the password. Enter your password again.
Press the ENTER or _,-button.
Press the ENTER or _ button, and then select On
using the AT buttons.
The Parental Control screen appears.
3
Select the desired Level you want using the AT
buttons, then press the ENTER or _- button.
For exampte, if you select up to Level 6, discs that
contain Level 7, 8 will not play. A higher number indicates
that the program is intended for adult use only.
Press the RETURN
_OTE
or _ button to return
to the previous menu.
Press the MENU button to exit the menu.
English - 41
| Changingthe Password
See page 92 if you forgot your password.
NOTE
Select Change Password
using the AT
buttons.
Press the ENTER or _ button.
The "Enter the password" message will be displayed.
Enter
the 4-digit
password using the 0 to 9 buttons on
the remote
control.
The "Confirm the password" message wilt be
displayed.
Enter your password again using the 0 to 9 buttons on
the remote control.
42 - English
BeforeRecording
a _¸
This unit can record on various types of discs. Before
recording, read the following instructions and select the
disc type according to your preference.
This section snows various DVD recording
methods.
| Recordable
discs
This recorder can record on the following
DVD-RW
discs.
DVD-R
RW
R
* DVD-RWs are rewritable.
* DVD-Rs are non-rewritable
Compatibility
Recorders
between Samsung
and Other Companies'
DiscTypes RecordingRecording
Device FinalizingAdditional
Recording
format
inSamsung
Recorde
Samsang
VRMode
finalized Notrecordable
totfinalized Recordable
OtherCompany finalized Notrecordable
totfinalized Recordable
DVD-RW
V Mode
Samsung
finalized Notrecordable
lotfinalized Recordable
finalized Notrecordable
OtherCompany totfinalized Notrecordable
Samsung
DVD-R
VMode
Other
Company
Before Recording
.......................
43
finalized Notrecordable
lotfinalized Recordable
finalized
Notrecordable
lotfinalized Notrecordable
Recording the current TV program
you are watching
..........................
m Finalize
45
NOTE
Recording from External Equlpmem
Copying from a Camcorder
...........
..................
Making a One Touch Recording (OTR
48
.......
Setting a Timer Recording ...................
Flexible Recording {for Timer Recording only,
Editing the Scheduled Record List
Deleting the Scheduled Record List
47
............
49
50
...51
51
...........
52
Recording the Scheduled Record List ..........
53
- This closes the DVD-R/-RW
and no
additional recording can be done.
m Unfinalize
- This allows additional recording on a
DVD-RW disc originally recorded on the
DVD-R130.
- A DVD-RW disc that has been recorded
by DAO(Disc At once) in a PC cannot be
unfinalized.
- A DVD-RW disc that has been recorded
in Video Mode of another manufacturer's
recorder cannot be unfinalized.
- A DVD-R disc cannot be unfinalized.
English - 43
| Recording Formats
| Record Mode
Since available functions differ depending on the disc
type, select a disc that best fits your preference; When
you insert an unused disc, the following message
appears.
DVD-RW: When a blank disc is first inserted, the
message "Uninitialized Disc Do you want to
initialize this disc?" will appear. When "Yes" is
selected, the disc will be formatted in VR
Mode.
Select one of four record modes by pressing the REC
MODE button repeatedly for the desired recording time
and picture quality while the unit is in Stop mode.
In general, picture quality improves as the recording
time decreases.
In FR mode, the most suitable record mode is selected
automatically according to the remaining time on the
disc and length of the timer recording set.
Mode
Characteristic
XP
Selectwhenthevideo
Recording
TimesDataRates
(highqualitymode) qualityis important.
SP
about8 Mbps
Selectto recordin
Approx.2 hours
about4 Mbps
(standard
quality
mode)standardquality.
LP
Approx.1 hour
Select_,_ena long
Approx.4 hours
(longrecording
mode' recording
timeisrequired.about2 Mbps
EP
(extendedmode'
If you want to format in either VR Mode or Video
Mode, refer to Formatting a Disc on pages 85-86.
FR
Selectwhena longer
recordingtimeis
required.
Approx.6 hours/
about1.2Mbps
Approx.8 hours/
about0.8 Mbps
for timerrecordingonly Approx60to 480Nin
(FlexibleRecording' seepage51.
| Unrecordable
Approx0.8to 8Mbps
video
Video with copy protection cannot be recorded on this
DVD Recorder. When the DVD Recorder receives a copy
guard signal while recording, recording stops and the
following message appears on the screen.
DVD-R : Formatting the DVD is unnecessary and only Video
Mode Recording is supported
DVD-RW(Videomode)l-R
. Chapters will be created automatically
recording on DVD-R / DVD-RW discs
The chapter's length (interval between
according to the recording mode.
. Simple editing (erasing titles/changing
when you finalize
in Video mode.
chapters) varies
title name)
Concerning Copy Control Signals
TV broadcasts that contain copy control signals may have
one of the following three signal types, COPY-Free, CopyOnce and Copy-Never. If you want to record a copy-once
type program, use DVD-RW with CPRM in VR Mode.
DVD-RW(VRmode)
_-_
. This mode allows multiple editing functions (such as
deletion of the whole title, partial deletion of a title, etc.)
. Various editing options using a created Ptaytist
DVD-RW(Ver.I.I )
Copy-Free
Copy-Once
Copy-Never
O
DVD-RW(Ver.I.I )
with CPRM
VR mode
O
Video mode
O
DVD-R
O
O*
When a "Copy Once" recording has been made, recording
cannot be done anymore.
44-
English
Content
Protection
forRecordable
Media
(CPRM)
CPRM is a mechanism that ties a recording to the media on
which it is recorded, it is supported by some DVD recorders,
but not by many DVD players. Each blank recordaNe DVD
has a unique 64-bit media ID etched in the BCA. When
protected content is recorded onto the disc, it can be
encrypted with a 56-bit C2 (Cryptomeda) cipher derived from
the media ID.
,0C0rdi,g
pr0gr0,
Y0°
oro
During playback, the ID is read from the BCA and used to
generate a key to decrypt the contents of the disc.
If the contents of the disc are copied to other media, the ID witl
be absent or wrong and the data witl not be decryptable.
Check that the disc has enough available space for the
recording. Adjust the recording mode.
| About the INFO button
Press the OPEN/CLOSE button and place a
recordabte disc on the disc tray.
TITL_LIST
DlSCMENU _TKE¥
pLAYLIST
CANCEl _T_EMENU
00®0
Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD" disappears from the front panel display.
DVD-RW
The INFO function allows you to view the current status
and progress of playback and recording. Depending on
the disc type and status, the displayed screen may be
different.
If an unused DVD-RW disc is inserted, you will be
prompted to initialize first. Make your selection using
the 4 _ buttons, then press ENTER(See
page 44)
| Checking the available disc space
(Disc Information)
When recording on a used disc, make sure that there is
enough disc space for recording. With DVD-RWs, you
can free up disc space by erasing titles.
* Press the INFO button.
The disc information
display window appears.
items in the display differ depending
or the recording format.
on the disc type
(_ Disc Type
Current information display status
(_ Disc Name
Total Title : Total number of titles
Total Playlist : Total number of Playlists
Recordable Time : The longest continuous
recording time in each of the record
modes(approximate)
Date : Current date
_Time
: Current time
English - 45
Press the CH ((_/G)
or number ( @ ~Q ) buttons
to select the current program you want to record.
Press the REC MODE button repeatedly, (or press the
REC MODE button and then press the AT button) to
select the recording speed(quality).
|
sP-LP EP-xP-,
J
To stop recording
Press the STOP (@) button to stop or finish a
recording in progress.
• When using DVD-RW/DVD-R discs, the message
'Updating the information of disc. Please wait for a
moment.' is displayed.
To pause
recording
Press the PLAY/PAUSE
recording in progress.
(Q)
Press the PLAY/PAUSE
recording.
(_))
button to pause
button again to resume
= You can not change
the channel
NOTE
=
5
the record
information concerning the channel is displayed on the
displayed
will stop automatically
= Up to 99 titles can be recorded
disc.
=
=
Recording
will stop automatically
image is selected.
is
from the one you're
before
Most new discs are sold
= Do not use DVD-R authoring
this unit.
Press the INFO button once again to view information about the
recording.
recording.
discs must be formatted
starting to record.
unformatted.
To view the current status of the disc and progress of recording :
Press the INFO button, and the information about the disc will
appear.
if a copy
If you are using a Cable Box(no antenna),
you cannot watch a different cable TV
program
English
if there
onto a
protected
= DVD-RW
46-
mode and
recording.
no free space left for recording.
Press the REC button.
screen and then recording begins, icon( ())is
on the front panel.
Recording
during
discs with
Press the REC button.
To stop recording
Press the STOP ((_)
recording in progress.
button to stop or finish
* When using DVD-RW/DVD-R
discs, the message
'Updating the information of disc. Please wait for a
moment.' is displayed.
Check that the disc has enough available space for the
recording. Adjust the record mode.
NOTE
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2
3
Press the OPEN/CLOSE button to ctose the disc tray.
Wait until "LOAD" disappears from the front panel
display.
If an unused DVD-RW disc is inserte& the message
"Uninitialized Disc Do you want to initialize this disc?" will
appear (See page 44)
Press the INPUT SEL. button to setect the input
source according to the connection you made.
The front panel display changes in the following
sequence:
m You can not change the record
input source during recording.
m Recording
will stop automatically
no free space
protected
m DVD-RW
if there is
left for recording.
m Up to 99 titles can be recorded
disc.
m Recording
mode and
onto a
will stop automatically
if a copy
image is selected.
discs must be formatted
starting to record.
unformatted.
before
Most new discs are sold
m Do not use DVD-R authoring
this unit.
discs with
Channel Number _ AV1 _ AV2 _ DV--]
If you've connected a digital camcorder, press the
INPUT SEL. button to select DV. (See page 48)
Press the REC MODE button repeatedly, (or press
the REC MODE button and then press the AT
button) to select the recording speed(quality).
[-* SP _ LP .-* EP .-* XP..]
English - 47
Copying
froma Camcorder
Select
PLAY (_)theicon
on the upper
part the
of the
screen the
to playback
camcorder
and find
starting position to copy.
To start recording, select REC(_) icon in the top side
of the screen using the 4 _ buttons, then press the
ENTER button.
You may control a Digital Camcorder using the IEEE1394
(DV) interface.
To stop recording
Press the STOP ((_)
recording in progress.
Check that the disc has enough available space for the
recording. Adjust the record mode. See pages 25~26 to
see how to connect the camcorder to your DVD recorder.
button to stop or finish
. When using DVD-RW/DVD-R
discs, the message
'Updating the information of disc. Please wait for
a moment'
is displayed.
= You can not change
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
input source while
NOTE
=
2
Recording
the record
mode and
recording.
will stop automatically
if there
Press the OPEN/CLOSE button to close the disc tray.
Wait until "LOAD" disappears from the front panel display.
If an unused DVD-RW disc is inserted, whether to
initialize or not will be asked first. (See page 44)
Press the REC MODE button repeatedly
(or press
the REC MODE button and then press the AT
button) to select the recording speed(quality).
FSP_
LP_
EP_XP
]
= Up to 99 titles can be recorded
disc.
= DVD-RW
onto a
discs must be formatted
starting to record.
unformatted.
before
Most new discs are sold
= Do not use DVD-R authoring
this unit.
discs with
= To access
during
recording,
on-screen
controls
press the _ or 1_ buttons.
= When copying
from a camcorder
and the
end of the tape is reached (no Video),
screen may turn blue or purple.
4
Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that
enables Digital camcorder
of the screen.
48-
is
no free space left for recording.
English
control appears on the top
the
To view the current status of the disc and the progress of
recording : Press the INFO button, and information about
the disc wilt appear.
Recording(O
You can set the DVD Recorder to record in preset
increments by pressing the REC button repeatedly.
Press the INFO button once again. Then you can check
the information about the title being recorded
If you want
to record
a TV channel,
the CH(©
/ (D)
buttons
or number
buttons
to select use
a desired
channel.
If you want to record from a connected external
component, press the INPUT SEL. button to select an
appropriate external input(AV1, AV 2 or DV).
* CATV channels: 1 to 125
* TV channels: 2 to 69
Example 1) SelectingChannel 120
®+®+©
Example 2) SelectingChannel 9
®+®
To stop recording
Press the REC button to start recording.
Press the STOP ( Q ) button. The message "Press
STOP button once more to cancel Timer Record." is
displayed.
Press the REC button to adjust the recording time.
0:30 _ 1:00 .-* 1:30 _ 2:00 .-* 3:00 _ 4:00.-* off 1
The timer counter
NOTE
the DVD Recorder
After finishing
Recorder
decreases
to 0:00, then
stops recording.
recording,
will be turned
Press the STOP ( _ ) button again to stop recording.
the DVD
off automatically.
English - 49
Setti.gaTimerRecordi,g
i!i
• Source: Select the video input source (AV 1, AV 2) or the
broadcasting channel you want to make a timer recording
of. When selecting channels to be recorded, the AT buttons
on the remote control can let you select only the channels
that have been memorized during Auto Channel Memory.
For the selection of other channels, use the number buttons.
• Date: Date that the timer recording starts
You need to set the Clock (Setup - Clock Set) before
proceeding with a timer recording. (See page 29)
01/01
MON-FRI
01/02
Every SAT
01/30
01/31
Every SUN
• Start/End Time: Start and end time of the timer
recording
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE
button to close the disc
• Mode (Record mode)
XP : Approx. 1 hour
SP : Approx. 2 hours
LP : Approx. 4 hours
EP : Approx. 6 hours or 8 hours.
tray.
FR : See page 51.
Wait until "LOAD" disappears from the front panel
display.
If an unused DVD-RW disc is inserted, whether to
initialize or not will be asked first. (See page 44.)
NOTE
When you are recording at EP mode on a
DVD-RW(V)/-R disc, it may not record the full 6
or 8 hours because the unit uses the
VBR(Variable Bit Rate) ENCODING system.
For example, if you record a Program with a lot
of action, it uses a higher bit rate which in turn
consumes more disc memory.
Press the MENU button in Stop mode.
You can also set a timer recording via the TIMER button.
Press the ENTER button.
Press the AT buttons to select Timer
then press the ENTER or _, button.
Rec., and
• ( Q ) and Timer Set will appear on the front panel
display. This means that a timer recording is set.
• Recording is automatically performed when the set time
is reached.
Press the AT buttons to select Timer Record,
and then press the ENTER or _ button.
The Timer Record Input items are displayed.
NOTE
Fill in the items using the ,_.T4 _- buttons.
_1 _ : Moves to the previous/next item,
AY 0-9 : Sets a value.
50-
English
m If the timer settings overlap
The programs are recorded in order of priority.
If timer recording is set for the first program
and then again for the second program and
both programs overlap, the following message
will appear on the screen: 'This setting is
identical with 1.' The message shows that the
first program has priority.
After recording of the first program is complete,
the second program starts being recorded.
m To exit without saving the current setting
Press the MENU or TIMER button.
m To return to the previous menu
Press the RETURN button if you don't want to
set a timer recording.
g
The timer recording time may differ from the
set time depending on the disc and the
overall timer recording status (for example,
recording times overlapping, or when the
previous recording ends within 3 minutes of
the start of the next recording.)
NOTE
g
Q_will start blinking if Timer Recording
ready to start.
Press the AT buttons to select Scheduled
Record List, and then press the ENTER or t,button.
is not
Fle×ibleRecording(for
Timer RecorBingOnly}
Press the AT buttons to select the number of the
Scheduled Record List you want to edit, and then
press the ENTER or _ button.
The Edit and Delete items are displayed.
In FR mode, the most suitable record mode is selected
automatically, according to remaining time on the disc
and length of the timer recording set.
The FR mode recording setup is the same as Timer
Recording setup. When setting the mode in step 6,
select FR Mode.(See page 50.)
Editingthe Scheduled
RecordList
Press the AT buttons to select Edit, and then
press the ENTER or _ button.
The Timer Record Input item is displayed.
You can change timer record settings using the
scheduled record list menu.
Press the MENU button in STOP mode.
Edit the items you want to modify. See the Timer
Record section for more information on Timer Record
Press the AT buttons to select Timer
then press the ENTER or t,- button.
Rec., and
Input items. (See page 50.)
Move through the items with the _11_ buttons and
change the settings with A_ or number buttons
and press the ENTER button.
Press
finished.the MENU button after the operation is
The menu screen will disappear.
English - 51
Press the AT buttons to select the number of the timer
recording you want to delete, and then press the ENTER
or _ button.
Deleting!he Scheduled
The Edit and Delete items are displayed•
You can delete timer record list using the scheduled
record list menu.
5
You will be prompted with the delete confirmation
message, For example • "Do you want to delete
'No.01'?".
Press the AT buttons to select Timer Ree., and then
press the ENTER or D,-button.
3
Press the AT buttons to select Delete, and then press
the ENTER or m,,button.
Press the AT buttons to select Scheduled Record
List, and then press the ENTER or _ button.
Press the _ _- buttons to select Yes, and then press the
ENTER button.
The selected entry will be deleted from the list.
Press the MENU button after the operation is finished.
The menu screen will disappear.
You can not delete programs that are
_OTE
52-
English
currently
being recorded.
,ooordi.
t,
sch,a.I,a, c
When the start time in the Scheduled Record List
reached while the unit is powered
automatically
is
off, the unit will
power on and start recording.
:::::::::_Ji_i_i_,,
............................................................................................
UHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH[_
When the scheduled recording is operating, the
program being recorded will not display on TV.
. Power on TV using the TV remote control.
. Power off TV using the TV remote control if you don't
want to see the program being recorded.
To stop recording
Press the STOP (Q) button. The message "Press
STOP button once more to cancel Timer Record." is
displayed.
Press the STOP ((_)
=
button again to stop recording.
If a copy protection
signal is received during
recording, recording wilt stop.
NOTE
=
If there is no free disc space or the disc is
not recordable,
recording will not operate.
(You can record after replacing the disc.)
English - 53
Read the following
This section introduces basic pla} back functions
and playback by disc type,
|
information
before playing a disc.
Region code (DVD-Video only)
Boththe DVD recorderand the discsare coded by region.
Theseregionalcodes must match in orderfor the discto play.
Numberfor
tf
the codes this
do not
recorderis
match, the
describedon
disc willnotthe
play.The
rearpanel
Region
of the
recorder.
|
Disc types that can be played
DiscTypes
Max,
Rayrng
Trrre
24O
480
80
160
Doublesided(3.5"
AUDIOSinglesided(5") 74
20
Singlesided(3.5":
DiscLogo Recorded
content DiscShape
BVB-VIDEO _
-,0
VIDEO
AUDIO-OD
_
_IGI_AL
AUXIn
Singlesided(5")
AUDIO+ VIDEO Doublesided(5")
SJnqJe
sided(3.5"i
JPEG
CD-Ri-RW
JPEGImages
MP3DD-R/-RW
MP3Audio
Singlesided(5")
Singlesided(35":
Singlesided(5")
Singlesided(3.5":
Single-sided
5"(4.7GB) 4(LP:Long
Payback)
DVD-RAM
_
o
AUDIO+ VIDEO
6or8(EP:Extended}
_AM
2(XP:
Excelient
Quality)
Double-sided4(SP:
Standard
Quality)
5"(9.4GB) 8(LP:
Long
Payback)
12or16(EP:Extended)
DVD-RW
D.=
_
AUDIO+ VIDEO
r4w
Standard
Quality)
5"(4.7GB) 2(SP:
4(LP:
Long
Payback)
6or8(EP:Extended}
DIGITALJ
SOUND _
1(XP:
Excelient
Quality)
DVD-R
Dolby Digital
DTS
DigitalAudio
NTSCbroadcast
sys[emin U.S.A
Canada.Korea
a
MP3
Japan.e[c.
Standard
Quality)
5"(4.7GB) 2(SP:
R
STE"EO
I"TSO]
Stereo
AUDIO+ VIDEO
4(LP:
Long
Payback)
6or8(EP:Extended}
Depending on the disc type, it may take
up to 20 seconds to load.
NOE
|
Discs that cannot be played
•
•
•
•
DVD-Video with a region number other than "1" or "ALL"
5" 2.6 GB and 5.2 GB DVD-RAM
3.9 GB DVD-R Disc forAuthoring.
DVD-RW(VR mode) not recordedfollowing the Video Recording
Standard
Playing a Picture CD ...........................................................67
•
Ptaytng the Title List ............................................................68
•
•
•
Unfinalized DVD-R,unfinalizedDVD-RW(V mode) recorded on
other equipment.
PAL discs
DVD-ROM/PD/MV-Disc/DiVXVideo Disc, etc.
Video CD/CVDISVCDICD-ROMICDV/CD-GICD-t
Before Playing ................................................................... 54
Playing a Disc.................................................................... 55
Playing an Audio CDIMP3 .................................................64
54 - English
NOTE
m This DVD recorder can only operate with
discs that are compatible with DVD-RAM
Standard Version 2.0.
m Playback and/or recording may not work for
some types of discs, or when specific
operations, such as angle change and
aspect ratio adjustment, are being
performed. Information about the discs is
written in detail on the box. Please refer to
this if necessary.
m Do not allow the disc to become dirty or
scratched. Fingerprints, dirt,dust,scratches
or
deposits of cigarette smoke on the recording
surface may make it impossible to use the
disc for recording.
Place a disc gently into the tray with the disc's
label facing up.
For DVD-RAM discs, insert the printed side facing up.
Press the OPEN/CLOSE
tray,
button to close the disc
• Your DVD Recorder closes the disc tray and loads the
disc automaticaUy.
• When the recorder is powered on and a disc is in the
tray, the unit witl be activated and wait in Stop mode.
m DVD-RAM/-RW/-R
discs may not be able to
play on some DVD players, depending on
the player, disc and the condition of the
recording.
m Discs with PAL programs recorded on them
can not be recorded on using this product.
• Press PLAY(C0 button to start piayback.
• If you want the unit to play automaticaUy when it is
powered off with a disc in the unit, power on with the
PLAY( Q ) button.
Piayi.g aDisc
4
NOTE
Ca_t}oI_
Press the STOP(_)
button to stop playback.
When you stop playing the disc,the recorder
rememberswhere you stopped.When you press PLAY
buttonagain, it will pick up where you left off. (unless
the disc is removedor the recorderis unplugged,or if
you do not press the STOPbutton twice.) This function
is only applicableto DVD-VIDEO,DVD-RAM,DVDRW,DVD-R or audio CDs (CD-DA).
Do not move your DVD recorder while
playing, as this may cause damage to the
disc.
Make sure to press the OPEN/CLOSE
button to open or close the disc tray.
Do not push the disc tray while it is being
opened or closed, as this may cause a
product malfunction.
Do not place foreign materials on or in the
disc tray.
Some functions may perform differently or be
disabled depending on the disc type.
If this occurs, refer to the instructions written
on the disc case.
Be especially careful that children's fingers
are not caught between the disc tray and the
tray chassis when it closes.
You must only insert one DVD disc at a time.
Inserting two or more discs will not allow
playback and may cause damage to the
DVD player.
English - 55
ii
i
|
Using the Disc Menu & Title Menu
|
Using the Search Functions
Some discs contain a dedicated menu system that allow
you to select special functions for the title, such as chapters,
audio track, subtitles, film previews, information on
characters, etc.
STOP
PLAY
For DVD-VIDEO discs
Press
menu. the DISC MENU button to enter the disc's
. Move to the setup menu related to the playback
operation.
. You can select the audio language and the subtitles
provided by the disc.
Press
TITLE
menu the
of the
disc. MENU button to move to the title
• Use this button if the disc contains more than one title. Some
type of discs may not support the title menu function.
DVD-VIDEO/
_
DVD-RAM/
_" Fast 3(X 8) -_ _'_ Fast 4(X16) _
Fast l(X 2) _ _
DVD-RW/DVD-R
_
Fast 5(X 32) _ _'_ Fast 6(X128)
_
For DVD-RAM/-RW/-R discs
Press
List.
the TITLE LIST button to move to the Title
Titme List
_
: Title List shows
a list to help
you select a title. Since the title
list consists of the information
NOTE
on video that is actually
recorded, if one title is deleted,
that title cannot
_
(CDDA)
_'_ Fast X 8 _ t-_. Fast X 2
• You can scan the program in reverse.
To return to normal speed playback, press the
PLAY((_ ) button.
• When you press and hold the SEARCH((_
(_)
button, playback is done at the default speed of fast 2.
If you release the SEARCH((_) _ ) button, playback
is performed at a normal speed.(Except CD-DA)
• The speed marked in this function may be different
from the actual playback speed.
g
selecting a desired scene in
the entire Title List. When one
playlist is played, only the
scene selected will play and
then stop. Since only the
necessary
playing a desired
for
scene
is
included in a playlist, even if
that playlist is deleted, the
original
deleted.
56 - English
material
Fast X 2 _ _'_ FastX 4 _
be played
: This refers to a unit of
playback, which is made by
information
Fast l(X 2)
AUDIO CD
again.
Play List
Fast2(X 4) -'1
will not be
(VR mode only.)
No sound is heard during
mode except fast playback
mode.
NOTE
g
For CD(CD-DA),
Scan(Search)
(1.7X speed)
You can hear sound
during Scan mode.
| About ANYKEY
During
through
playback,
you can search
a chapter
quickly
or track.
............................................................................................................................................................................................................................
_Ji_"JiHiHiHiHiHHH_;"
"J
During
playback,
the remote
control.press the SKIP(_
*
If you press the SKIP(G
_
) button on
TI_LCLIST
DISCt_atU _U,,VK_V CANC_
) button,
O@ O
it moves to the beginning of the chapter or track or
marker(DVD-RW(VR
mode)).
Pressing the button once again within 3 seconds
returns to the beginning of the previous chapter or
track or marker(DVD-RW(VR
*
_LmLIST
Tn'L__t_U
mode)).
If you press the SKIP(_;_ ) button,
The ANYKEY function allows you to easily search for a
desired scene by accessing title, chapter, track, and
time. You can also change the subtitle and audio
settings and set some features including Repeat, Angle,
and Zoom.
it moves to the next chapter or title or marker(DVDRW(VR mode)).
|
Slow Motion Play
•
if you want to move to a title
a desired scene.
or chapter
to find
iiiiiiiii_i_i_iiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
In Pause
press the SEARCH ((_))
the
remotemode,
control.
*
If you press the SEARCH(Q
button on
) button,
Press the ANYKEY button during playback.
C
*
I1_ Slow I(I/2)_
I1_ Siow2(1/4)_
If you press the SEARCH( _
r
I!_ Siow3(I/8) q
) button,
_1_ Slow 1(1/2)_ "_1 Slow 2(1/4)-,
*_l Slow 3(1/8) -7
* To return to norma! speed playback, press the
PLAY((_)
button.
Press and hold the SEARCH( O ) button during pause,
and the disc will play s!owly at a 1/2 speed. If the button
is released, the pause operation will resume.
Press the _r
The speed marked
_,_OTE
different
in this function
from the actual
playback
buttons to select the Title or Chapter.
may be
speed.
| Step Motion Play
i[[[[
Press
STEP(
Q Q ) button on the remote
control the
in the
still mode.
.
Eachtime the buttonis pressed,a new framewill appear.
When STEP( G ) is pressed,the previousflame will be activated.
Press the _ _, buttons or number (0~9) buttons
to select the desired scene and then press the
ENTER button.
When STEP( Q ) is pressed,the next frame will be activated
.
To return to normalspeed playback,press the PLAY((_) button.
English - 57
• If you want to move to a desired
find a scene.
time to help you
|
Using the Repeat Function
Press the ANYKEY button during playback.
Using the REPEAT button
Press the REPEAT button during playback.
Press the A_r buttons
to select the Time.
Press the REPEAT button or press the A_'
buttons to select the Title or Chapter you want
to play repeatedly,
Press the ENTER
button.
Enter the time in the sequence of hours,
minutes, and seconds using the number buttons
and then press the ENTER button.
The Time Search
NOTE
operate
function
does not
in some discs.
To make the screen disappear,
ANYKEY
press the
again.
Chapter : Repeats the chapter that is playing.
Title : Repeats the title that is playing.
To return
to normal
playback
Press the REPEAT button and select Off by
using _
or REPEAT button.
Press the ENTER or CANCEL button to return to normal
playback.
58 - English
Using the ANYKEY button
_2 :_ _
._!_
Press the ANYKEY button during playback.
Using the ANYKEY button
Press the ANYKEY
Press
press
the AT
the _ _.
Chapter
buttons
buttons
button during playback.
to select Repeat and
to select the Title or
you want to play repeatedly.
Press the AT buttons to select Repeat
press the 1_button to select A-B.
and
Press the ENTER button.
To make the menu screen disappear, press the
ANYKEY or RETURN button.
g
NOTE
DVD-RAM,
unfinalized
DVD-RW(VR
mode),
DVD-R and unfinalized
RW (Video mode) do not repeat
DVD-
Press the ENTER
button.
a chapter.
Press the ENTER button at the point where you
want the repeat play to start (A) and press it
again at the point where you want the repeat
play to stop (B).
Repeat playback of the A-B section starts.
g
If you set point (B) before
has lapsed,
NOTE
the prohibition
five seconds
mark (Q)
will
appear.
g
You can also activate
pressing
g
Audio
support
Normal
the CANCEL
CDs(CD-DA)
Playback
by
button.
and MP3 discs do not
the Repeat A-B function.
English - 59
| Selecting the Subtitle
|
Subtitle languages may not work depending on the
disc type. This is only available during playback.
Selecting the Audio language
Audio languages may not work depending on the disc
type. This is only available during playback.
(VR mode)
Using the SUBTITLE button
(VR mode)
Using the AUDIObutton
Press the SUBTITLE button during playback.
r
Press
Press the SUBTITLE
button or AT
select the desired subtitle language.
buttons
To make the menu screen disappear,
CANCEL or RETURN button.
press the
the AUDIO button during playback.
to
Press the AUDIO
select the desired
button or AT buttons
audio language.
to
1
4_
Press the _
buttons to select Subtitle and
press the _ 1_buttons to select the desired
subtitle language.
Press the _,_" buttons
press the _ I_ buttons
audio language.
=
NOTE
The subtitle display may be different depending
on the disc type.
= If the subtitles overlap_ disable the caption
function on your TV.
= Some discs allow you to select the language for
the disc menu only.
60 - English
to select Audio and
to select the desired
g
NOTE
g
Audio languages may be different because
they are disc-specific.
Some discs allow you to select the audio
language for the disc menu only.
g
This function is disc-dependent,
not work all DVDs.
g
This function
NOTE
|
does not work when
has not been recorded
camera
and may
a DVD
with a multi-
angle system.
Changing the Camera Angle
When a DVD-VIDEO contains multiple angles of a
particular scene, you can select the Angle function.
This is only available
during playback.
If the disc contains multiple angles, the ANGLE mark
appears on the screen.
Press the A_' buttons to select Zoom,
press the ENTER button.
Press the ANGLE button or AT buttons
the desired angle.
and then
( _, ) will be displayed.
to select
Using the ANYKEY button
Press the ANYKEY button during playback.
ii
Press the _,_ _ _. buttons
you want to enlarge.
4
Press the ENTER
enlarged
to move to the area
button. The screen will be
to twice the normal
size.
If you press the ENTER button once again after the screen
is enlarged to twice the normal size,the screen size will be
Press the A_' buttons to select Angle and press
the _ _. buttons or number(0--9) buttons to
select the desired
enlarged to four times the normalsize.
angle.
C
normal size--_ 2X-* 4X-* 2Xq
English - 61
i
| Using Bookmarks
This feature lets you bookmark sections of a DVD or DVDR/-RW(V mode), so you can quickly find them.
Press the MARKER button during playback.
(V mode)
1
Press the MARKER button during playback.
2
Press the MARKER
button during
Press the _1_,- buttons to select a bookmarked
scene.
Press the ENTER or PLAY(_)
) button to start
playing from the selected scene.
playback.Press
the ENTER button when the
desired scene appears.
The number 1 is displayed and the scene is memorized.
Press the MARKER button during playback
Press the _ _. button to move to the next position.
_&S;;2
4
Press the ENTER
Press
scene. the _1_,- buttons
to select a bookmarked
button when the desired
scene appears.
The number 2 is displayedand the scene is memorized.
Press
CANCEL
selectedthe bookmark.
, Repeat above to bookmark other positions.
• You can bookmark up to 10 scenes.
NOTE
When the disc tray is opened and then
closed, bookmarks will disappear.
The button display
on the disc type.
62 - English
may differ depending
button to delete the
I Using Markers
(VR mode)
t
,,,
Press the MARKER button during playback.
2
Press the _1b,-buttons to select a bookmarked
scene.
Press the ENTER button when the desired scene
appears.
The number 01 is displayed and the scene is
memorized.
Press the ENTER or PLAY( O ) button to start
playing from the selected scene,
• tf you press the SKIP( (_)button, it moves to the beginning of
the marker. Pressing the button once again within 3 seconds
returns to the beginning of the previous marker.
• If you press the SKIP( ® )button, it moves to the next marker.
Press the MARKER
button during playback.
Press the _1b,-button to move to the next position.
Press
scene. the _1 _ buttons to select a bookmarked
Press the CANCEL button to delete the selected
Press the ENTER button when the desired scene
appears.
bookmark.
The number 02 is displayed and the scene is memorized.
• DVD-RAM or DVD-RW (VR Mode) discs have the
Marker function instead of the Bookmark function.
The Marker function allows you to mark up to 99
scones. Since the scenes may be displayed as
many different pages, numbering is necessary. If a
disc in use is encoded with Disc Protect, Markers
cannot be set or deleted. Onty playback is available.
* When a marker is cleared while DVD-RW (VR mode) is
playing, marker numbers will change. For example, if the
7th marker is cleared after ten markers are registered, the
marker numbers after the eighth will automatically move
ahead by one and the 8th marker becomes the 7th.
English - 63
| PJaying an Audio CD (CD-DA)/MP3
©--
@®@
©®@
@@@
® @
=@® ®®-
Each disc has a variety of menu functions available.
=®
=®
ThelnSert
an audio
CD menu
CD (CD-DA)audio
appears and
int° traY.th
the
e tracks
disc (songs) are
played automatically.
00®0
1. AT
: Selects a track (song).
2. I_ : Plays the selected track (song).
3. ENTER( Cb' ) button : Plays the selected track (song).
4. SKIP(®
) button : Plays the next track.
5. SKIP( _
) button : Returns to the beginning of the
current track when pressed during
PresShear,
and
the then
A_ buttOnSpres
s the
t° ENTER
select the
button
track or
you button.Want
to
playback, if pressed again, your
DVD recorder moves to and plays
the previous track. If you press this
button within three seconds after
playback starts, the previous track
wilt be played.
if you press this button after three
seconds, the current track will be
replayed from the beginning.
6. SEARCH((_/_
7. STOP((_))
) button : Fast Play (X2, X4, X8)
: Stops a track(song).
& PLAY/PAUSE((_)
: Plays a track(song) or pauses
playback.
9. ANYKEY: To select the top menu on screen display
(Repeat or Play Option).
1. PLAY MODE icon
2. Current track (song) : Displays the number of the track
currently being played.
& Displays the current play index and total track number.
4. Shows the operating state of a disc and the current
playback time.
& Displays the track tist (song list) and the playing time of
each track.
& Buttondisplay.
64 - English
©@@
@@@
©®®
@ @
Insert an MP3 disc into the disc tray.
And press the AT buttons to select Disc
Navigation,
and then press the ENTER or _, button.
©
m®
®
-@®
®®®®
MENU
a_t_RN
-®
Press the A_" buttons to select Music, and then
press the ENTER or _ button.
The MP3 menu appears and the tracks(songs) are
played automatically.
@
m@
®
m®
00®0
1. AT
: Selects a track (song).
2. _ : Plays the selected track (song).
3. ENTER(_
4. RETURN(Q
Press the AT buttons to select the track (song) you
want to hear, and then press the ENTER button or
button.
) button
: Plays back the selected track
(song) or displays the files in
the selected folder.
) button
: Moves to the folder to which
the current song belongs.
5. SKIP( @ ) button
: Plays the next track.
6. SKIP( Q ) button
: Returns to the beginning of the
current track when pressed while
playing. If pressed again, your
DVD recorder moves to and
plays the previous track. If you
press this button within three
seconds, the previous track wilt
@
be played. If you press this
button after three seconds, the
current track will be replayed
from the beginning.
7. STOP((_)
: Stops a track(song).
8. PLAY/PAUSE((_)
) : Plays a track(song) or pauses
playback.
9. ANYKEY : To select the top menu on screen display
(Repeat or Play Option).
1. PLAY MODE icon
2. Current track (song) : Displays the name of the track
being played.
3. MP3 file information.
4. Shows the operating state of a disc and the current
playback time.
5. Displays the information for the folder and its tracks.
6. Button display.
English - 65
2
Using the REPEAT button
Press the REPEAT button during playback.
The TRACK repeat mode icon (co) appears and the
selected track is played repeatedly.
Select the desired repeat mode (TRACK or DISC)
using _ _. buttons, and then press the ENTER
button.
For MP3 discs, you can select Folder, Track or
Disc.
To return
to normal
playback
Select Off in p(ay mode window using 4 _, buttons,
and then press the ENTER button.
The Play Option can be used with an audio CD in the Play
or Stop mode.
....................................................................................................
_j_j_?__j)__
2
Press the REPEAT button once more to play the
entire disc repeatedly.
Press the ANYKEY button in the Stop mode.
Play Option will be highlighted.
The DISC repeat mode icon (_,) appears and the
inserted disc is played repeatedly.
• During Playback, Repeat Mode will be highlighted.
,;s;_
TO return
to normal
playback
-1 Select a desired play option (Normal, Random, Intro
or Playlist) using the _ _ buttons. Press the
ENTER button.
_
3
Press the REPEAT button repeatedly
until the
repeat mode icon disappears, or press the
CANCEL button.
• Normal : Tracks on a disc are played in the order in
which they were recorded on the disc.
• Random
Using the ANYKEY button
Press the ANYKEY button during playback.
The play mode window appears.
: The Random option plays the disc's tracks in
random order. After a random list is generated
and played completely, another random list is
generated and played.
Random Play is continued until the play option
is changed.
• Intro : The first 10 seconds of each track will be played. If
you want to listen to the music that you have
selected, press the ENTER button or PLAY(_ )
button. The play option wilt be changed to Normal
Play. When tntro Play is completed, Normat Play
is performed.
• Playlist : The Playlist playback option allows you to
select the order in which you want tracks to
play.
66 - English
You can register a maximum of 30 tracks in the playlist.
Press the ANYKEY button during playback, then
setect PLay option using AT buttons.
Insert an JPEG disc into the disc tray.
2
Select Playlist using the _ _
buttons, and then
press the ENTER button.
The Playlist screen will appear.
Select tracks in the order in which you want them to
Press the A'_' buttons to select Disc Navigation,
then press the ENTER or _,-button.
and
play using the ,_T buttons.
Press the ENTER button.
Press the A_ buttons to select Photo, and then
press the ENTER or _, button.
3
If you playlisted a wrong track, press the _, button,
then press the AT buttons to select wrong track and
press the CANCEL button.
The wrong track will be removed.
4
Press the AT _1_,- buttons
to select a picture.
• To see the next 8 pictures, press the SKIP((_)
button.
• To see the previous 8 pictures, press the SKIP( Q ) button.
4
Press the PLAY( @ ) button to playback the playlist.
English - 67
-1 If you press the PLAY( _
screen will appear.
) button, the Slide show
The picture interval (Slide show speed) must be set.
Follow these instructions
Title List.
to ptay back a scene from the
-2 Press the ENTER button with a picture selected in
the Album screen. Select a display mode (Album
screen
(_),
Slide show ( _
), Rotation
( I_ )
or Zoom ( e. )) using the 4
buttons, then press the ENTER button.
: Returns to the Album screen.
: The unit enters slide show mode.
Before the slide show can begin, the picture interval
(Slide show speed) must be set.
_&5;;2
Press the A'_ buttons to select an entry you want to
play from Title List, and then press the PLAY((_)
button.
The selected entry (title) witl be played back.
: Each time the ENTER button is pressed, the
picture rotates 90 degrees clockwise.
% • Each time the ENTER button is pressed, the
picture is enlarged up to 4X.
(Normal .._ 2X .-.+4X .._2X .-.+Normal)
. Press the ANYKEY button to display or clear menus.
68 - English
To stop playing the title, press the STOP((_)
button.
To return the title list screen, press the TITLE LIST
button.
To view the current status of the disc and the
progress of playback
Using the MENU button
: Press the mNFO button, and
the information about the disc will appear.
ii
Press the MENU button.
Press the INFO button once again. Then you can
check the information about the title under playback.
Press the AT buttons to select Title List, and then
press the ENTER or _ button twice.
The Title List screen is displayed.
To
stop playing the title, press the STOP((_)
button.
To return the title list screen, press the TITLE LIST
button.
Press the AT buttons to select Titme, and then
press the ENTER or I_ button.
The Edit menu is displayed on the right.
g
NOTE
(Rename,
Delete, Edit, Protection
You can also play a recorded program by
pressing the ANYKEY
playback.
button during
: See pages 72~75)
Press the AT buttons to select Play to play the title
list and then press the ENTER button.
The selected entry (title) will be played back.
Press the AT
buttons to select Title.
Press the _11_or number buttons to select to
play the title list and then press the ENTER
button.
English - 69
®®
®
®
Playback screen for recorded
entries
Q Information window for the selected entry : Title
name, recording date, lock status, record mode
Recorded entry No.
Recorded entry title
Recording length (i.e., the playing time)
Title list edit items
Play : Plays the selected entry.
Rename : Renames the title of a selected entry.
Delete : Deletes the selected entry from the list.
Edit : Deletes a section.
Protection
: Locks or unlocks the selected entry.
Button display
NOTE
g
This may depend
g
DVD-R/DVD-RW(Video)
editing function.
70 - English
on the the disc type.
has limited
This section
introduces
basic functions
of DVD
editing.
Title List
A title is a section of recorded
video and audio.
Title List shows a list to help you select a title.
Since the title list consists of the information on
stream that is actually recorded, if one title is deleted,
that title cannot be played again.
This refers
selecting a
When one
by the user
information
included in
the original
Basic Editing (Title List_ ..................
72
Advance Editing (Playiist)
76
Disc Manager
.................
..........................
84
to a unit of playback, which is made by
desired scene in the entire Title List.
piayiist is played, only the scene selected
will play and then stop. Since only the
necessary for playing a desired scene is
a ptayiist, even if that playtist is deleted,
recorded title will not be deleted.
Recording or editing might not be completed if an
error such as a sudden power failure occurs.
Please be aware that material that has been
damaged cannot be retrieved.
English - 71
m
¢_]__;_
Basi Editing (Tjtie List)
|
Renaming (Labeling) a Title
Follow these instructions to rename a title list entry, i.e.,
to edit the title of a recorded program.
Select the desired characters using the AT
buttons, press the ENTER button.
_l _,
Using the TITLE LiST button
Press
the List
TITLE
LISTis button.
The Title
screen
displayed
Using the MENU button
, Press the MENU button.
, Press the Ay buttons to select Title List, then
press the ENTER or _ button twice.
* Back Space : Deletes the character before the
cursor.
* Space : Enters a blank and moves the cursor one
forward (to the right).
* Delete : Deletes the character at the cursor
position.
* Clear : Deletes all the character inputs.
* Save : Registers the character inputs.
5
Press the AT buttons to select an entry you want to
rename from the Title List, and then press the
ENTER or _ button.
iiil i i
i_
%
Press the AT
3
buttons to select Rename, and then
press the ENTER or _ button.
The Rename screen is displayed.
72-
English
Press the AT 4 I_ buttons to select Save, and then
press the ENTER button.
The changed title name is displayed on the title item of
the selected Title list entry.
| Locking (Protecting)
a Title
Follow these instructions to lock an entry to protect it
from accidental deletion.
4
Press the 4 I_ buttons to select On, and then press
the ENTER button. The key icon on the information
window for the selected entry changes to the locked
status. ( _t' _ _ )
If you want to unlock the title entry,select the protected title
and set the Protectionfunction to Off.
Using the TITLE LIST button
Press the TITLE LIST button.
The Title List screen is displayed
Using the MENU button
, Press the MENU button•
• Press the AT buttons to select Title List, and then
press the ENTER or I_ button twice.
| Deleting a Title
Follow these instructions to delete an entry from the Title List.
Using the TITLE LIST button
Press
ATthebuttons
to select
an entry
protect the
from
Title List,
and then
pressyou
thewant to
ENTER or _- button.
1
Press the TITLE LIST button.
The Title List screen is displayed
Using the MENU button
, Press the MENU button•
* Press the AT buttons to select Title List, and then
press the ENTER or I_ button twice.
Press the AT buttons to select Protection,
press the ENTER or I_ button.
and then
m
Press the AT buttons to select an entry you want to
delete from the Title List, and then press the ENTER
or I_ button.
English - 73
ii/ iiiii _
Press
the ATor l_-button.
buttons to select Delete, and then press
the ENTER
|
Deleting a Section of a Title
Follow these instructions to delete a section of a Title List
entry.
(VR mode)
Using the TITLE LIST button
_HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHWi_i_i_i_i
_HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
You will be prompted with the confirmation message.
DVD-RW(VR mode): Since Playlist is present, the
message "Do you want to delete?(Related playtists may
be deleted.)" is displayed.
Press the TITLE LIST button.
The Title List screen is displayed
Using the MENU button
,
Press the MENU button.
• Press the AV buttons to select Title List, and
then press the ENTER or 1_button twice.
DVD-RW(Video
mode), DVD-R: Since Playtist is not
present, the message "Do you want to delete?" is
displayed.
• The message may be different depending on the
type of disc.
Press the AT buttons to select an entry you want to
edit from the Title List, and then press the ENTER or
t,- button.
Press
the _11_
buttons to select Yes, and then press
the
ENTER
button
iiil i i
i_
g
You cannot delete a protected entry.
If you want to delete a protected entry, select
"Off' in the Title Protection menu.
g
Once an entry is deleted from the Title List, it
cannot be recovered.
g
Once a DVD-R or DVD-RW
cannot be deleted.
g
With DVD-R, titles are only deleted from the
menu, however, the Title remains physically
on the disc.
NOTE
74-
English
is finalized, it
Press the A'_' buttons to select Edit, and then press
the ENTER or t,- button.
Press the ENTER button at the starting point.
The image and starting point time are displayed on the
Press
the 4 button.
I_ buttons to select Delete, and then press
the ENTER
section deletion starting point window.
The message "Do you want to delete?(Deleted part will
not be restored)" is displayed.
Edit Title List Screen Elements
7
1 Playback bar
2 Title List No.
Press 4 I_ buttons to select Yes, and then press the
ENTER button.
The selected section is deleted.
To return to the Title List screen_ press the _l _- buttons
to select Return.
3 Section deletion starting point window and time
4 Section deletion end point window and time
• Select the start and end points of the section
you want to delete using the playback related
buttons.
• Playback related buttons ((_,
G, G
(_: (_, _
The length of the section to be deleted must
be at least 5 seconds long.
NOTE
)
g
If the length of the section to be deleted is
less than 5 seconds, you will be prompted
with the message "The range is too short.".
g
Press
the ENTER
at the
point. in the
The image
and end button
point time
areend
displayed
Section deletion ending point window.
If the end time precedes the starting point,
you will be prompted with the message "End
point cannot be marked earlier than start
point".
g
The section cannot be deleted when it
m
includes a still picture.
m Press the MENU button after the operation
has finished.
The Edit Title List screen will disappear.
English - 75
5
• The yellow-colored selection bar moves to the End
item.
AdveneedEditing
• Select the starting point of the section from which
you want to create a new scene using the playback
IPl0
related buttons ((_, _,
| Creating a Playlist
(_,
_,
_
G
_ ).
Press the ENTER button at the end point.
Followthese instructionsto create a new playtistentryfrom
a recorded
title.
(VR mode)
i
Withthethe
unit incontrol.
Stop mode, press the MENU button
on
remote
Press the AT buttons to select Playlist, and then
press the ENTER or _ button.
• The image and end point time are displayed
End window.
• The yellow-colored
item.
on the
selection bar moves to the Make
To make a new playlist
Press the 4 I_ buttons to select Make, and then
press the ENTER button.
A new Scene will be added to the current Playlist.
A new Make Scene screen is displayed.
Repeat the above steps to create further scenes.
Press the AT buttons to select New Playlist, and
then press the ENTER or _ button.
The Make Scene screen is displayed.
g
If you want to make a new playlist, go to
MENU _ new playlist.
g
You can check and see all the scenes
NOTE
on
Edit Playlist screen.
To return
to Edit Playlist
menu
Press the 4 I_ buttons to select Return, and then
press the ENTER button.
The Edit Playlist screen is displayed.
iiil i i
i_
_ff
Press the ENTER button at the start point.
_
4
g You can create up to 99 playlist
NOTE
g Depending
screen may look slightly
g Press the MENU
the operation
• The image and starting point time are displayed on
the Start window.
76-
English
entries.
on the disc type, the displayed
different.
or PLAY
LIST button after
has finished.
The Edit Playlist
screen will disappear.
| Playing Entries in the Playlist
Follow these instructions
to play the playlist
Press
the ATbutton.
buttons to select Play, and then select
the
ENTER
entries.
The playlist entries will be played.
(VR mode)
With
the unit in stop mode, press the PLAY LIST
button.
The Edit Playlist screen is displayed.
Using the MENU button
• Press the MENU button in the stop mode.
• Press the ,&_' buttons to select Playlist, and then
press the ENTER or _,,button.
• Press the A_' buttons to select Edit Playlist, and
then press the ENTER or _ button.
2
Press the AT
buttons to select the title you want to
* To view the current status of the disc and the
progress of playback : Press the INFO button,
and the information about the disc will appear.
* Press the INFO button once again. Then you can
check the information about the playtist currently
being played back.
edit from the Playlist, and then press the ENTER or
button.
The Edit Playlist menu is displayed : Play, Rename, Edit
Scene, Copy, Delete.
m
* The screen returns to the Edit Playlist screen
when the playback has finished.
Pressthe
STOP((_) buttonto
stop playing.
Thescreenreturnsto
the EditPlaylistscreen.
English - 77
| Renaminga Playlist Entry
Follow these instructions
to rename
i.e. to edit the title of a playlist
Enter
the desired characters using the AT
buttons.
_11_
a playlist entry,
entry.
(VR made)
With the unit in stop mode, press the PLAY LIST
button.
The Edit Playlist screen is displayed.
• This function is the same as the Rename function in
renaming the title list. (See page 721)
• The maximum number of characters that can be
entered is 31. All 31 characters can be displayed
by pressing the INFO button.
5
Using the MENU button
. Press the MENU button in the stop mode.
• Press the AT buttons to select Playlist, and then
press the ENTER or _ button.
• Press the A_' buttons to select Edit PlaylisL and
then press the ENTER or _- button.
2
Press the AT buttons to select the title you want to
edit from the Playiist, and then press the ENTER or
_,- button.
The Edit Playtist menu is displayed : Play, Rename, Edit
Scene, Copy, Delete.
iiiill
i_
Press the ,_
buttons to select Rename, and then
press the ENTER button.
78-
English
Press the AT
_ _ buttons to select Save, and then
press the ENTER button.
The changed title name is displayed on the title item of
the selected playlist entry.
| Editing a Scene for the Playlist
Follow these instructions
to edit scenes for a playlist
(VR mode)
With
the unit in stop mode, press the PLAY LIST
button.
The Edit Playlist screen is displayed.
Press the _,T _1 t,- buttons to select the scene you
want to play, and then press the ENTER button.
The ptaytistentry to be played is selected.
Using
the MENU button
• Press the MENU button in the stop mode.
, Press the A_' buttons to select Playlist, and then
press the ENTER or _', button.
• Press the _,T buttons to select Edit Playlist, and
then press the ENTER or 1_button,
2
Press the AT
buttons to select the title you want to
edit from the Playtist, and then press the ENTER or
t,- button.
The Edit Playlist menu is displayed:Play, Rename, Edit
Press the ENTER button.
The selected scene is played.
Scene, Copy, Delete.
m
• To stop scene play, press the STOP((_J) button.
Press the ,_T buttons to select Edit Scene, and then
press the ENTER button.
The Edit Scene screen is displayed.
English - 79
Press
scene. the ENTER button at the end point of the
Press the AT _ I_ buttons to select the scene you
want to modify, and then press the ENTER button.
. The image and ending point time are displayed on
the End window.
Press the 4 I_ buttons to select Change, and then
press the ENTER button.
Press the AT buttons to select Modify, and then
press the ENTER button.
o The scene you want to modify is changed with the
selected section.
Press
scene. the ENTER button at the start point of the
iiil i i
i_
. The image and starting point time are displayed
on the Start window.
. Select the starting or ending point of the
section you want to modify using the playback
related buttons ((_,(_)
80-
English
,(_ , _,
(_ ,_,
_).
g
No'rE
Depending
disc type, the displayed
may look slightly
screen
different.
Press the A'V 411_buttons to select the scene you
want to move (change the position), and then press
the ENTER button.
4
Press the AT
4 1_buttons to select the scene that
wilt have a new scene inserted before it, and then
press the ENTER button.
A yellow selection window is displayed on the scene to
be added as the new scene.
Press thebutton.
AT buttons to select Move, then press the
ENTER
Press
the
AT buttons to select Add, then press the
ENTER
button.
A yellow selection window is displayed on the scene to
be moved.
Press the AT 4 1_buttons to select the position to
which you want to move the selected scene, and
then select the ENTER button.
Press the ENTER button at the starting point of the
scene.
m
5
The selected scene is moved to the selected position.
• The image and starting point time are displayed on
the Start window.
. Select the end point of the section where you want
to add the new scene using the playback related
buttons (@,(_),@,
@, @, @,
@ ).
English - 81
Press the ENTER button at the end point of the scene.
| Copying
a Ptaylist Entry to the
Playlist
Using the PLAY LiST button
Press the PLAY LIST button.
The Edit Playlist screen is displayed.
• The image and end point time are displayed in the
End window.
. To cancel, press the 4 _. buttons to select Cancel
and then press the ENTER button.
Press
the 4 button.
1_ buttons to select Add, and then press
the ENTER
Using the MENU button
• Press the MENU button in the stop mode.
• Press the AT
buttons to seiect Playlist,
and
then press the ENTER or _,- button.
• Press the AT
buttons to select Edit Playlist,
and then press the ENTER or I_ button.
The section you want to add is inserted prior to the
scene selected in step 4.
2
Press the A_
buttons to select the title you want to
copy to the Playlist, and then press the ENTER or I_
button.
The Edit Playlist menu is displayed : Play, Rename, Edit
Scene, Copy, Delete
Press the AT _ 1_ buttons to select the scene you
want to delete, and then press the ENTER button.
Press the A_ buttons to select Copy, and then
press the ENTER button.
Press the A'V buttons to select Delete, and then press
the ENTER button.
5
82-
English
Playlist that has been selected will be copied.
Press the AT buttons to select DeLete, and then
press the ENTER button.
g
The playlist can contain up to 99 playlist
entries (titles).
g
Press the MENU button after the operation
has finished.
NOTE
, You will be prompted with the delete confirmation
message "Do you want to delete'?".
The Edit Playlist screen will disappear.
|
Deleting a Playlist Entry from the
Playlist
Using the PLAYLIST button
r;
With
the unit in Stop mode, press the PLAY LIST
button.
Press
the 4 button.
!_ buttons to select Yes, and then press
the
ENTER
The Edit Playlist screen is displayed.
You automatically returned to the Edit Playlist screen
after the deletion operation has finished.
Using
the MENU button
•
Press the MENU button in the stop mode.
•
Press the AT buttons to select Playlist, and then
press the ENTER or _ button.
Press the AT buttons to select Edit Playlist, and
,
then press the ENTER or I_ button.
2
m
Press the AT buttons to select the title you want to edit
from the Playlist, and then press the ENTER or _ button.
5
The Edit Playlist menu is displayed : Play, Rename, Edit
Scene, Copy, Delete.
English - 83
A
Enter the desired characters using the AT
buttons.
_1D,-
| Editing the Disc Name
Follow these instructions to give a name to a disc.
• This function is the same as the Rename function in
renaming the title list. (See page 72.)
. The maximum number of characters that can be
entered is 31. All 31 characters can be displayed by
pressing the INFO button.
With
unit incontrol.
Stop mode, press the MENU button
on thethe
remote
Press the AT _1_ buttons to select Save, and then
press the ENTER button.
A disc name is given to the disc.
Press the AT buttons to select Disc Manager, then
press the ENTER or _,- button.
g
You may need to clear disc protect before
beginning editing.(see page 85.)
g
Depending
NOTE
on the kind of disc, the displayed
screen may be different.
iiiill
i_
Press the AT
%
buttons to select Disc Name, then
press the ENTER or I_ button.
The Rename screen is displayed.
84-
English
| Disc Protection
Disc Protection allows you to protect your discs from
being formatted or deleted due to unintended
operations
:::::::::::_jIHHHHHHHHHHHHHHHHHHHHHHHHHHH_jIHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH_j_HHHHH_I_jIHIHHHHHHHHHHHHHHHHHHHHHHHHHHHHH_jIHHHHHHHHHHH_jI_I_IH_I_I_I_I_I_I_j_HHHHH_H_HHH_
With
theremote
unit incontrol.
Stop mode, press the MENU button
on the
|
Formatting
a Disc
Use these instructions
The disc protection
to format
should
a disc.
be cleared.
Withthethe
unit incontrol.
Stop mode, press the MENU button
on
remote
Press the AT buttons to select Disc Manager, and
then press the ENTER or _- button.
Press the AT buttons to select Disc Manager, and
then press the ENTER or _,-button.
Press the A_" buttons to select Disc Protection,
then press the ENTER or _ button.
m
Press the AT buttons to select Disc Format, and
then press the ENTER or _ button.
Press the AT buttons to select Protected,
press the ENTER button.
then
English - 85
DVD-RW
• You will be prompted with the confirmation message
"Choose the recording format for DVD- RW"
4
Press the 4 _,- buttons to select desired mode, then
press the ENTER button.
Press the AT buttons to select Disc Manager, and
then press the ENTER or _, button.
Press the AT buttons to select Delete All Title
Lists, and then press the ENTER or t,- button.
. You will be prompted again with the message "All
data will be deleted. Do you want to continue?"
. You will be prompted with the confirmation message
"Do you want to delete all title lists?".
Press
the _1b,buttons to select Yes, and then press
the ENTER
button.
The disc is formatted.
DVD-VR and DVD-V are defined according to their
recording format.
DVD-VR
DISC
DVD-V
DVD-RW
DVD-RW
DVD-R
|
. When Protected Entry exists: The Delete All Title List
function will not operate. If you want to delete a
protected entry, disable Protection for it on the Lock
item. (See page 73)
Deleting All Title Lists
The disc protection
should
be cleared
first.
Press
the _11_
buttons to select Yes, and then press
the
ENTER
button.
AIt title lists are deleted.
1
86-
With theon unit
Stop mode,
button
the in
remote
control. press
English
the MENU
You will be prompted with the message 'Do you want
to finalize disc?".
| Finalizing a Disc
After you record titles onto a DVD-RW/DVD-R
disc with
your DVD recorder, it needs to be finalized before it can
be played back on external devices.
Withthetheremote
unit incontrol.
Stop mode, press the MENU button
on
If you select Yes, you will be prompted again with the
message "Disc will be finalized. Do you want to
continue?".
Press the AT buttons to select Disc Manager, and
then press the ENTER or I_ button.
Press
the _11_
buttons to select Yes, and then press
the
ENTER
button.
The disc is finalized.
NOTE
Once a disc is finalized, you cannot delete
entries from the record list.
After being finalized, the DVD-R/DVD-
Press the A'_' buttons to select Disc Finalize, and
then press the ENTER or I_ button.
RW(video
mode) operates in the same
manner as a regular DVD disc and is
playable in standard DVD players.
Depending
on disc type, the displayed
screen may appear slightly different.
Finalizing time may be different depending
on the amount of data recorded on the disc.
Data on the disc will be damaged if the
recorder is powered
off during finalizing
process.
English - 87
ii
m
i
i
| Unfinalizing a Disc (VNR mode)
Press
the 4 button.
i_ buttons to select Yes, and then press
the ENTER
The disc is unfinalized.
g
A DVD-RW can be finalized or unfinalized
in
Video mode.
NOTE
Mark
Finalize
Unfinalize
DVD-Video(RW)
DVD-RW(V)
OperationSameasDVD-Videc
_,dditional
recording,
protection
anddeletion
arepossible
g
A DVD-RW can be finalized or unfinalized
in
VR mode.
Press the AT buttons to select Disc Manager, and
then press the ENTER or I_ button.
Mark
Operation
Press the ,_T button to select Disc Unfinalize,
then press the ENTER or _ button.
and
You will be prompted with the message "Do you want to
unfinalize disc?".
iiiill
i_
%,%
%3
If you select Yes, you will be prompted again with the
message "Disc will be unfinalized. Do you want to
continue?".
88-
English
Finalize
Unfinalize
DVD-RW(VR:F)
DVD-RW(VR)
Additional
recording, Additional
recording,
deletion,editing,and
ddetion,
editingand
,rotection
areimpossible protection
arepossible
Troubleshooting
"onal
rmatJ
If your product malfunctions, go through the
checkpoints below before contacting a Samsung
authorized service center.
| Power
power is turned
on.
The DVD recorder requires some time
to initialize and the input will be
displayed for approx. 10 seconds after
it is turned on.
| Recording
Cannot record TV programs,
Check
whether
the power cord is
securely plugged into the power outlet.
Did you set the DVD recorder channel
settings correctly?
Check the free space on your DVDRW/DVD-R discs.
_!'ttl
I pressed
the REC button but there is no response
Recording is possible for DVD-RW/
DVD-R discs only. If a program is copy
Troubleshooting ...........................
8c
Solutions to Error Message ..................
93
Specification
95
Warrant],
.............................
...............................
protected, it cannot be recorded.
96
English - 89
| Ptayback
Cannot play the disc.
Check whether the disc is inserted
correctly with the label facing up.
Check the regiona! code of the DVD
disc.
The ang!e operation does not work while playing a
DVD disc.
The angle operation is available
when the disc contains images
only
captured from different angles.
This DVD recorder cannot play some
types of discs. (See pages 5, 54.)
The selected audio and/or subtitle language
is not
(2) icon appears on the screen.
You cannot use this operation or
function due to one of the following
reasons:
(1) Your DVD disc restricts it.
(2) Your DVD disc does not support
this feature (for example: angles)
(3) The feature is not available at the
moment.
(4) You've requested a title, chapter, or
scan time that is out of range.
Play mode settings are different from the settings
configured in the Settings menu.
The disc does not support all selected
functions. In this case, some settings
configured in the settings menu may
not work properly.
,_,_J,_::;
Cannot change the aspect ratio.
The aspect ratio is fixed for DVD
discs. (See page 34.)
90-
English
Audio and subtitle languages are discspecific. Only the sound and subtitle
languages contained on the DVD disc
are available and displayed in the disc
menu.
| Video
| Timer
The disc revolves, but no image or bad quality
images are displayed.
...............
Recording
Timer !amp flickers:
@
Check whether there is damage to or
any foreign material on your disc.
Some low quality discs may not play
properly.
Check whether the current disc is
recordable or not.
Make sure to check before the start
time of recording.
If scenes change from dark to bright
suddenly, the screen may shake
vertically temporarily,
fault.
Check if there is enough space in the
disc for recording.
but this is not a
Timer recording does not work properly.
| Sound
Re-check the recording time and the
end time settings again.
No sound.
Recording will be cancelled, if the
power is disconnected due to a
power failure or other similar reason,
while recording.
Are you watching a program in scan
mode?
If you are playing a program at a
speed other than normal and fast1
speed, the sound wilt not be heard.
Check the connections
and settings.
Check whether the disc is damaged.
Clean the disc, if necessary.
Check whether
the disc is inserted
correctly with the label facing up.
J
Check whether you have selected
the correct digital output options in
the Audio Output Options menu.
(See page 32, 33.)
English-
91
| RemoteControJUnit
@
The remote control doesn't work.
F
@
Point the remote control at the remote
control sensor on your DVD recorder.
Allow for proper distance. Remove
obstacles between your DVD recorder
and the remote control.
Check whether the batteries are
empty.
|
Other
@
Press the (G) and (Q) buttons on
your DVD recorder simultaneously
when the power is on. All settings
including the password will revert to
the factory settings. Do not use this
unless absolutely necessary.
(Note that this function is possible only
when no disc is inserted.)
@
A recorded disc is played with only
the subtitle and the audio signal
which were selected during recording.
92-
English
Read the table of contents and then
find and read the section describing
your problem, and follow the
instructions given.
Turn your DVD recorder off and on.
If the problem still persists, contact a
nearby Samsung service center.
Before
contacting
a Samsung
Error
authorized
service
center, perform the following
simple checks.
Solution
/ Explanation
Message
You cannot record a copy protected movie.
,_ You can't record the video since it is protected by copyright.
You cannot record. This disc is protected.
This disc cannot be formatted (the disc is
protected).
This disc cannot be renamed
(the disc is protected).
_, Disc you are using is protected.
The disc cannot be finalized (the disc is
use this function,
protected).
to page 85.
To record on this disc or
cancel the disc protection
function.
Refer
This [Menu] is not available (the disc is
protected).
The disc cannot be played,
Please check the regional code of the disc.
_, The disc does
and cannot
not match
be played
the regional
on this
code for your
area
device.
This disc cannot be formatted.
Please check the disc.
You could not format the disc
because of error detection.
You could not finalize the disc
_, Make
sure there
are no scratches
or dirt on the disc.
because of error detection.
You could not unfinalize the disc
because of error detection.
The disc cannot be played,
Please check the TV system.
_, The disc is PAL format
and cannot
be played
on this
unit.
The disc can be neither played nor recorded.
_, Make
sure there
are no scratches
or dirt on the disc.
The disc cannot be played, Please check the disc.
If the disc has invalid information,
no more titles can be recorded.
Please format the disc beforehand.
_, You can't
previous
use the disc because
it contains
errors
from
recordings.
Use the disc after formatting.
English - 93
SoJutionto Error Message
Error Message
Solution / Explanation
_, You can't use the disc because
Error is detected
on the disc.
previous
it contains
errors from
recordings.
Use the disc after formatting.
_, When operating,
errors happen.
Turn off the device.
(To turn off, press and hold the power button on the front
System
error is found.
of the device for 10 seconds.)
Please try it again after turning
off the power.
After turning
off, press the Open button and remove
the
disc from the device.
,_ Make sure the DV device is connected
connection
The DV device is not connected.
If it is connected
If you are unable to solve the problem
,_ The model and serial number
,_ The warranty
94-
properly,
the above instructions,
turn it off and on once again.
note:
on the rear of your DVD Recorder
of the problem
your nearest
English
to the DV
information
_, A clear description
Then contact
after reading
properly
Jack.
SAMSUNG
authorized
service
center. Call 1-800-SAMSUNG
for a center near you.
Specif
.....
Power
120V AC, 60Hz
requirements
19 Watts
Power consumption
5.5 Ib
Weight
General
Dimensions
Operating
16.9 in(W) x 8.5 in(D) x 1.9 in(H)
+41°F to +95°F
temp.
Other conditions
Keep level when operating. Less than 75% operating humidity
1.0 V p-p at 75£Qload, sync negative
Video
(1,2)
S-Video input (Y: 1.0Vp-p, C: 0.286Vp-p at 75£Qload)
Audio(1,2)
Max.Audio Input Level : 2Vrms
DV Input
IEEE 1394(4p) compatible jack
Input
Receivable
Regular TV broadcasting: VHF (2~13), UHF (14~69)
Channels
Cable TV broadcasting: 1~125
Analog output jacks 1, 2
Audio
Optical/Coaxial digital audio output
Full scale Analog output level : 2Vrms
Output
Video output jack 1
Video
S-Video output 1 (Y:l.0Vp-p, C:0.286Vp-p at 75£Qload)
Component output 1 (Y: 1.0Vp-p, Pb: 0.70Vp-p, Pr: 0.70Vp-p at 750 load)
Picture Compression
Audio
Compression
MPEG-II
format
format
Dolby Digital 2ch/256kbps
XP (about 8 Mbps), SP (about 4 Mbps), LP (about 2 Mbps),
Recording
Recording
Quality
EP (about 1.2 Mbps or about 0.8 Mbps)
20 Hz ~ 20 kHz
Audio Frequency Response
For DVD discs, audio signals
Audio
Output
Analog
Audio
frequency
are converted
recorded
and output
at 96kHz
sampling
at 48kHz.
Output
u
48 / 96kHZ
.
44:lkHZ
Digital Audio OutpUt
I
48kNz
I
4-4_lkHz
English - 95
L¸
This SAMSUNG
brand
INC. (SAMSUNG)
warranted
limited
product,
by SAMSUNG
warranty
as supplied
and delivered
against
manufacturing
warranty
used in the United
Warranty
repairs
service,
or SAMSUNG's
States,
center.
dated
in materials
consumer
AMERICA,
purchaser,
and workmanship
service
Ninety Days (90)
/
date of purchase,
is
for the following
center.
installation,
authorized
must be presented
service
upon request
Transportation
Labor
and is valid only on products
transportation,
by SAMSUNG's
bill of sale
or replace
to be defective
Prior
the warranty
to returning
determination
operation
Parts
and does not include
must be performed
will repair
during
problem
Year
on the original
authorized
if found
returned
defects
ELECTRONICS
to the original
removal
purchased
and
or reinstallation.
center.
To receive
as proof
of purchase
to and from the service
center
warranty
to SAMSUNG
is the
of the purchaser.
SAMSUNG
parts,
begins
the original
responsibility
by SAMSUNG
carton
period:
One (1)
This limited
and distributed
new, in the original
_i
this
product,
during
period
warranty
with transportation
any product
and service
at our option
the limited
for warranty
procedures.
and at no charge
period
charges
service,
specified
prepaid
The product
to SAMSUNG's
the purchaser
SAMSUNG
with new or reconditioned
above.
must contact
does
not warrant
of SAMSUNG
and must
must
be
designated
service
SAMSUNG
uninterrupted
for
or error-free
of the product.
All replaced
parts and products
Replacement
parts
become
and products
the property
assume
the remaining
original
warranty,
be returned
or ninety
to SAMSUNG.
(90) days,
whichever
is
longer.
This limited
warranty
noncommercial
damage
which
or problems
abuse,
peripheral;
finish;
occurs
which
neglect,
fluctuations
covers
manufacturing
use of this product
are caused
product
product
alteration
applications
fire, water,
lightning
caused
by improper
or modification;
serial
and environmental
non-SAMSUNG
or unauthorized
result in service
problems;
failures
numbers;
instructions
parts,
including,
this product
not supplied
installation;
or unauthorized
to follow
operating
accessories
incorrect
repair;
accidents,
electrical
damage
customer
damage
equipment.
failures
misuse,
with any
or exterior
adjustments,
in the instruction
which
with other
to:
line voltage,
connection
cosmetic
instructions,
and prescribed
in normal,
was not intended;
improper
or equipment
due to incompatibility
encountered
but not limited
by SAMSUNG;
acts of nature;
or faulty
that are covered
supplies,
or problems
for which
or other
improper
failure
and workmanship
to the following,
and uses
or equipment
damage
with altered
in materials
by products
misapplication,
or surges;
maintenance
in shipment;
defects
and shall not apply
book;
this product
use of
or
ContactSAMSUNG
WORLDWIDE
Ifyouhaveanyquestions
orcomments
relating
toSamsung
products,
please
contact
theSAMSUNG
customer
carecenter.
Region
North America
Country
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
Latin America
Europe
ClS
East & Africa
Web Site
www.samsung.com/ca
www.samsung.oom/mx
1-800-SAMSUNG (7267864)
0800-333-3733
0800-124-421
www.samsung.oom
www.samsung.com/ar
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
1-800-234-7287
800-7267
1-800-682-3180
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
1-800-751-2676
1-800-7287-864
1-800-100-5303
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
02 201 2418
844 000 844
38 322 887
09 893 79 554
FRANCE
GERMANY
HUNGARY
08 25 08 65 85 (0,15_/Min)
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
199 153 153
02 261 03 710
POLAND
PORTUGAL
0 801 801 881
80 8 200 128
SLOVAKIA
SPAIN
SWEDEN
U.K
0850 123 989
902 10 11 30
08 585 367 87
0870 242 0303
RUSSIA
UKRAINE
AUSTRALIA
8-800-200-0400
8-800-502-0000
1300 362 603
CHINA
HONG KONG
800-810-5858, 010- 6475 1880
2862 6001
3030 8282
1600 1100 11
01805 - 121213 (_ 0,12/Min)
06 40 985 985
0900 20 200 88 (€ 0.10/Min)
231 627 22
INDONESIA
JAPAN
0800-112-8888
0120-327-527
MALAYSIA
PHILIPPINES
SINGAPORE
1800-88-9999
THAILAND
Middle
Care Center
1-800-SAMSUNG (7267864)
01-800-SAMSUNG (7267864)
800-726-7864(SAMSUNG)
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
INDIA
Asia Pacific
Customer
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232
TAIWAN
VIETNAM
02-689-3232
0800-329-999
1 800 588 889
SOUTH AFRICA
U.A.E
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
www.samsung.com/br
www.samsung.com/cl
www.sa msu ng.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.sa rnsu ng.com/latin
www.sa rnsu ng.com/latin
www.sa msu ng.com/latin
www.sa msu ng.com/latin
www.samsung.com/latin
www.sa msu ng.com/latin
www.samsung.com/latin
www.samsung.com/be
www.samsung.oorn/oz
www.samsung.com/dk
www.samsung.com/fi
www.sarnsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.ru
www.samsung.com/ur
www.samsung.com/au
www.samsung.oom.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.oom/vn
www.samsung.com/za
www.sarnsung.com/mea
HEADQUARTERS
105
Challenger
Road,
Ridgefield
Park,
N.J.07660-0511
TEL:
1-800-SAMSUNG
SERVICE
DIVISION
400Valley
Road_
Suite
201
Mount
Arlington_
NJ07856
1-800-SAMSUNG
(1-800-7267864)
www.sanlsung.com
AK68-01002A-00
Download PDF
Similar pages