Data required for directional LED bulb

Data required for directional LED bulb:
File-number
Bulb material
LED source
Number of LED
Nominal-voltage (V)
Nominal-power-consumption (W)
Rated power consumption (W) *)
Nominal-current-consumption (mA)
Nominal-frequency (Hz) or DC
Nominal-luminous flux (lm)
Rated useful luminous flux (lm)
Nominal-lifetime (h)
Rated-lifetime (h)
Nominal beam angle (°)
Rated beam angle (°)
Rated peak intensity (cd)
Colour temperature (K)
Colour rendering (Ra)
Colour consistency (cx, cy)
Lamp power factor
Lumen maintenance factor at the end of the nominal life
Socket
Starting time (s)
Spectral power distribution in the range 180-800 mm
Weighted energy consumption (Ec) in kWh / 1000 h
Lamp warm-up time to 60 % of full light output (s)
Number of switching cycles before premature lamp
failure
Intended for use in outdoor application (Y / N)
Intended for use in industrial application (Y / N)
Suitable for accent lighting (Y / N)
See EC regulation 1194/2012; 3.1.2 j)
Dim / no dim
Kind of dimming: Leading edge or trailing edge
Energy efficiency class according 874/2012/EC
Drawing of the lamp and of the comparing filament lamp
See EC regulation 1194/2012; 3.1.2 k)
--- Create packing department --Indication to type lamp
See EC regulation 1194/2012; 3.1.2 l)
Power-consumption equivalence incandescent lamp
See EC regulation 1194/2012; 3.1.2 m) (directional lamp)
See EC regulation 244/2009 table 6 (non directional
lamp)
Ambient temperature (Ta in °C)
Bulb dimensions (Ø x length in mm)
Bulb weight (g)
LN-04-15BS-S-30D-CW-00
Glass fiber and led
Genesis SMD5050
15leds
10-30V DC
3
3
170
50~60 Hz
240
240
35000
35000
120
120
455
5800-6800
75
X=0.3074 y= 0.3298
>=0.9
50%
G4
<0.1
N/A
3 kWh / 1000 h
<0.1
>30000
N
Y
Y
No dim
A
directional light
30w
‐20 ‐ +40 ℃
44.3*44.3
7
Legend:
a) A ‘rated’ value means a quantity value for a characteristic of a product for operating conditions specified in this
Regulation or in applicable standards. This value is usually described in a range, e.g.: 220V – 240V AC
b) A ‘nominal’ value means an approximate quantity value used to designate or identify a product.
This is usually described in specific value (not in a range), e.g.: 230V 
Download PDF
Similar pages