Electrical Installation Safety Electrical Installation Safety

Electrical Installation Safety
Electrical Installation Safety
Part
number
Description
Target application
Part
number
Description
Target application
A 1143
Euro Z 290 A
Euro Z 290 A is the impedance tester
which enables line / loop impedance
– –   – – – – –  – – – – – – – – –
measurements with an accuracy down to
0.1 mΩ.
A 1199
Ro-adapter
Ro-adapter is intended for performing
earth resistance measurement in combi- – –   – – – – – – – – – – – – – – –
nation with installation safety tester.
A 1192
Very sensitive inductive sensor serves for
Selective probe for
contactless fuse and cable finding. To be – –   – – – – – – – – – – – – – – 
R10K
used with A 1191.
EurotestPV
Remote
PV remote unit for measurement and log  – – – – – – – – – – – – – – – – –
ging of irradiance and temperature values
A 1067
Test lead for R10K, Test lead with probe enables fast and ac1.5 m, with built-in curate fuse finding and current circuit al- – –   – – – – – – – – – – – – – – 
resistor
location. To be used with A 1191.
Eurocheck is a professional multifunctional
field calibrator intended for use with instal- – –          –      – –
lation safety testers.
A 1168
Plug commander
(for MI 3100)
Single phase schuko plug commander
with TEST and BACKLIGHT function keys
– – – – – –  –  – – – – – – – – – –
for fast and simple measurements on one
phase sockets.
A 1256
Plug commander
(straight cable)
Single phase schuko plug commander
with TEST and MEM function keys for fast
– –     –  –  – – –  – – – – –
and simple measurements on one phase
sockets.
A 1170
Plug commander
Single phase schuko plug commander
with TEST and MEM function keys for fast
– –     –  – – – – – – – – – – –
and simple measurements on one phase
sockets.
A 1272
Plug commander
(for Smartec)
Single phase schuko plug commander
with TEST and MEM function keys for fast
– – – – – – –  – – – – –  – – – – –
and simple measurements on one phase
sockets.
A 1378
CS 2099 Eurocheck
A 1160
Fast charger for 8
AA batteries with
a set of 6 NiMH
bat., type AA
Fast battery charger for up to 8 pieces of
AA rechargeable batteries, and a set of 6          – –     – –  
pcs NiMH rechargeable batteries, type AA.
A 1169
Fast charger for
AA, C, D and 9 V
block batteries
Fast battery charger for up to 12 pcs AA, 6
pcs C or D rechargeable batteries, 4 pcs 9                   
V block batteries.
A 1083
Power supply
adapter with 6 pcs Battery charger and a set of 6 pieces of
         – – –    – – – –
NiMH batteries,
rechargeable batteries, type AA.
type AA
A 1191
Receiver R10K
Receiver R10K is used for wire tracing,
fuse identification and fault finding in low – –   – – – – – – – – – – – – – – –
voltage electrical installations.
Single phase, 3-wire, commander with
TEST and MEM function and RGB LED
indicator for easy insulation safety meas-  – – – – – – – – – – – – – – – – – –
urements for use with MI 3108 and its
successors.
Single phase, 3-wire, commander with
TEST and MEM function and RGB LED
indicator for easy insulation safety meas-  – – – – – – – – – – – – – – – – – –
urements for use with MI 3108 and its
successors.
A 1102
Luxmeter sensor,
type B
Luxmeter sensor, type B, for high-accura– – – – – – – – –  – – – – – – – – –
cy illuminance measurement.
A 1314
Plug commander
A 1119
Luxmeter sensor,
type C
Luxmeter sensor, type C, for illuminance
measurement e.g. for general light condi- – – – – – – – – –  – – – – – – – – –
tions testing.
A 1401
Tip commander
A 1172
Luxmeter sensor,
type B (PS/2)
Luxmeter sensor, type B, for high-accuracy illuminance measurement e.g. for – –  –   – – – – – – – – – – – – –
emergency lightning inspection.
A 1002
Tip commander
Single phase 2-wire commander with test
tip and START and SAVE function keys for – – – – – – – – –  – – – – – – – – –
installation safety measurements.
A 1173
Luxmeter sensor,
type C (PS/2)
Illuminance probe for light conditions
– –  –   – – – – – – – – – – – – –
measurements with 0,1Lux resolution.
A 1175
Tip commander
(for MI 3100)
Single phase 2-wire commander with test
tip and TEST and BACKLIGHT function – – – – – –  –  – – – – – – – – – –
keys for installation safety measurements.
A 1005
Fuse / fault / cable
locator
Fuse / fault / cable locator is used for wire
tracing, fuse identification and fault finding – – – – – – – – –  – – – – – – – – –
in low voltage electrical installations.
A 1176
Tip commander
Single phase 2-wire commander with test
tip and TEST and MEM function keys for – –     –  – – – – – – – – – – –
installation safety measurements.

1. 54
Photo
MI 3108
MI 3109
MI 3105
MI 3101
MI 3102H CL
MI 3102
MI 3100
MI 3125B
MI 3125
MI 2086
MI 2088
MI 3121H
MI 3121
MI 3122
MI 3123
MI 2126
MI 3103
MI 2150
MI 2093
Photo
Selection Guide for EIS Accessories
MI 3108
MI 3109
MI 3105
MI 3101
MI 3102H CL
MI 3102
MI 3100
MI 3125B
MI 3125
MI 2086
MI 2088
MI 3121H
MI 3121
MI 3122
MI 3123
MI 2126
MI 3103
MI 2150
MI 2093
Selection Guide for EIS Accessories
Option
–

Not available
Accessories: page 1.54
Accessories: page 1.54
Option
–
Not available
1. 55
Electrical Installation Safety
Electrical Installation Safety
Part
number
Description
Target application
Part
number
Description
Target application
A 1194
Tip commander,
3-wire (for MI
3100)
Single phase 3-wire commander with test
tip, TEST and BACKLIGHT function keys – – – – – –  –  – – – – – – – – – –
for installation safety measurements.
A 1197
Tip commander,
3-wire
Single phase 3-wire commander with test
tip, TEST and MEM function keys for in- – –     –  – – – – – – – – – – –
stallation safety measurements.
A 1244
Tip commander,
2-wire (straight
cable)
Single phase 2-wire commander with test
tip, TEST and SAVE function keys for in- – –     – – –  – –   – – – – –
stallation safety measurements.
A 1270
Tip commander
(for Smartec)
Single phase 2-wire commander with test
tip, TEST and MEM function keys for in- – – – – – – –  – – – –   – – – – –
stallation safety measurements.
S 2001
Earth test set,
4-wire, 20 m
A 1300
Tip commander,
3-wire (for
Smartec)
Single phase 3-wire commander with test
tip, TEST and MEM function keys for in- – – – – – – –  – – – – –  - – – – –
stallation safety measurements.
S 2002
Earth test set,
4-wire, 50 m
S 2007
Earth test set,
4-wire, 50 m (for
Smartec)
S 2026
Earth test set,
3-wire, 20 m
S 2027
Earth test set,
3-wire, 50 m
A 1052
PC SW EuroLink
PRO (for MI 2086)
EuroLink PRO is a professional PC Software which enables downloading, data
– – – – – – – – –  – – – – – – – – –
management and complete test report
preparation.
A 1290
PC SW EuroLink
PRO Plus with
USB and RS232PS/2 cable
Professional PC Software EuroLink PRO
Plus enables downloading, data management and complete test report prepara- – – – – – – – – – – – –    – – – –
tion. Delivered with RS232-PS/2 and USB
communication cables.
A 1291
PC SW EuroLink
PRO with USB and
RS232-PS/2 cable
PC Software EuroLink PRO enables downloading and test results management and
– – – – – – – – – – –     – – – –
printing of test reports. Delivered with
RS232-PS/2 and USB communication cables.
A 1292
Password for upgrading standard PC softUpgrade code
ware EuroLink PRO to advanced PC SW
    –  –  – – – –    – – – –
EuroLink PRO to
EuroLink PRO Plus with professional reEuroLink PRO Plus
port creation facility.
A 1018
A 1019
High accuracy current clamp 1000 A / 1 A
with jaw opening 52 mm and fixed 1.5 m
Current clamp (low
cable for both load and low range / leakage    –   – – –   – – –  – – – –
range, leakage)
current measurement and for earth resistance measurement as well.
Current clamp 1000 A / 1 A with jaw opening
52 mm for general current measurements
Current clamp
and in combination with A 1018 for earth – –  –  – – – –   – – –  – – – 
resistance measurement without breaking
the loop.
A 1068
Connection cable
for clamp, 1.5 m
A 1074
Mini current clamp 200 A / 0.2 A with jaw
Mini current clamp
opening 15 mm for current measurement – –  –   – – –   – – –  – – – 
200 A / 0.2 A
in confined spaces.
A 1391
A 1011
A 1021
Connection cable for connecting current
– – – – – – – – – – – – – – – – – – 
clamp on the instrument MI 2093.
AC/DC Current
clamp
AC/DC Current Clamp with 40 and 300 A
  – – – – – – – – – – – – – – – – –
range.
Test lead, 3 x
1.5 m
3-wire test lead for measurements on sin –         – – –  – – –  –
gle or three phase electrical installations.
Test lead, 4 x 1 m
4-wire test lead for measurements on
– – – – – – – – –   – – – – – – – –
electrical installations.

1. 56
Photo
MI 3108
MI 3109
MI 3105
MI 3101
MI 3102H CL
MI 3102
MI 3100
MI 3125B
MI 3125
MI 2086
MI 2088
MI 3121H
MI 3121
MI 3122
MI 3123
MI 2126
MI 3103
MI 2150
MI 2093
Photo
Selection Guide for EIS Accessories
MI 3108
MI 3109
MI 3105
MI 3101
MI 3102H CL
MI 3102
MI 3100
MI 3125B
MI 3125
MI 2086
MI 2088
MI 3121H
MI 3121
MI 3122
MI 3123
MI 2126
MI 3103
MI 2150
MI 2093
Selection Guide for EIS Accessories
Option
–
A 1055
Test lead, 2 x
1.5 m
2-wire test lead for continuity and insulation resistance measurements on electri- – – – – – – – – – – – –  – – – – – –
cal installations.
A 1319
2.5 kV test lead,
3 x 1.5 m
3-wire test lead with GUARD connection
for insulation resistance measurements
with test voltage up to 2,5 kV. Recom- – – – – – – – – – – –  – – – – – – –
mended to be used when measuring high
insulation resistances (>10 GΩ).
A 1385
Test cable for simultaneous AC/DC power
PV fused test lead and efficiency measurements of PV invert-   – – – – – – – – – – – – – – – – –
ers.
– – – – – – – – –   – – – – – – – –
– – – – – – – – –   – – – – – – – –
– – – – – – – – – – – – – –  – – – –
 –     –  – – – – – – – – – – –
 –     –  – – – – – – – – – – –

Not available
Accessories: page 1.54
Earth test set for earth resistance measurement on distance up to 20 m; set includes: test lead, 4 x 1 m; test lead, 20 m,
2 pcs; test lead, 4 m, 2 pcs; earth spikes, 4
pcs; soft carrying bag.
Earth test set for earth resistance measurement on distance up to 50 m; set includes:
test lead, 4 x 1 m; test lead, 50 m, 2 pcs;
test lead, 4 m, 2 pcs; test lead, 1 m, 2 pcs;
earth spikes, 4 pcs; carrying bag.
Earth test set for earth resistance measurement on distance up to 50 m; set includes: test lead, 50 m, 2 pcs; test lead,
4 m, 2 pcs; test lead, 1 m, 2 pcs; earth
spikes, 4 pcs; soft carrying bag.
Earth test set for earth resistance measurement on distance up to 20 m; set includes: test lead, 20 m, 2 pcs; test lead,
4.5 m; earth spikes, 2 pcs; soft carrying
bag.
Earth test set for earth resistance measurement on distance up to 50 m; set includes: test lead, 50 m, 2 pcs; test lead,
4.5 m; test lead, 1 m, 2 pcs; earth spikes,
2 pcs; soft carrying bag.
Accessories: page 1.54
Option
–
Not available
1. 57
Electrical Installation Safety
Electrical Installation Safety
Part
number
Description
Target application
Part
number
Description
Target application
A 1012
Test lead, green,
4m
Extension test lead for continuity meas          – – – – – – – – –
urements.
A 1014
Test probe, black
Test probe with ∅ 4 mm connection is suitable for performing measurements both in
– –             – –   
mains outlets and in situations when no
schuko outlet is present.
A 1154
Test lead, black,
4m
Extension test lead for earth and continuity
– –            –     –
measurements.
A 1015
Test probe, blue
Test probe with ∅ 4 mm connection is suitable for performing measurements both in
          – – –  – – –  –
mains outlets and in situations when no
schuko outlet is present.
A 1026
Test lead, red,
20 m
Extension test lead for continuity meas– –          –  –     –
urements.
A 1016
Test probe, red
Test probe with ∅ 4 mm connection is suitable for performing measurements both in
  – – – – – – – –    – – –   –
mains outlets and in situations when no
schuko outlet is present.
A 1153
Test lead, black,
20 m
Extension test lead for earth and continuity
– –            –     –
measurements.
A 1062
Test probe, green
Test probe with ∅ 4 mm connection is suitable for performing measurements both in
          – – –  – – –  –
mains outlets and in situations when no
schuko outlet is present.
A 1164
Test lead, black,
50 m
Extension test lead for earth and continuity
– –          –  –     –
measurements.
A 1198
Magnetic contact
probe
Test probe with magnetic contact provides
reliable contact with metal surface during               – –   –
the measurement.
S 2009
Test lead set, 2 m,
4 pcs
Set of 4 test leads is intended for two
clamp earth resistance measurement to – – – – – – – – – – – – – –  – – – –
connect current clamps on the instrument.
A 1201
Insulated rod for
CONTINUITY
measurement
Insulated rod enables insulation resistance
and continuity measurement on hard-to-              – – –   –
reach objects, e.g. luminaries.
S 2012
Continuity test
lead, 10 m, 2 pcs
(red, black)
2 pieces of extension test lead for continu– –          –  –     
ity measurements.
A 1202
Additional extension part for A
1201
Additional extension part for Insulated rod
             – – –   –
for CONTINUITY measurement A 1201.
S 2025
Test lead, 1.5 m,
2 pcs (black, red)
Connection leads for different measure– –          –  –     
ments.
A 1006
Soft carrying bag
Large soft carrying bag for transport and
storage of test instrument and belonging – – – – – – – – –   – – – – – – – –
accessories.
A 1013
Crocodile clip,
black
Crocodile clip assures secure and permanent contact during the measurement on – –             – –   
bus bars, fixing screws, etc.
A 1289
Soft carrying bag
Large soft carrying bag for transport and
storage of test instrument and belonging – –        – –     – – – –
accessories.
A 1064
Crocodile clip, red
Crocodile clip assures secure and permanent contact during the measurement on   – – – – – – – – – –  – – –  – –
bus bars, fixing screws, etc.
A 1020
Small soft carrying Small soft carrying bag for transport and
– – – – – – – – – – – – – – – – –  
bag
storage of test instrument or accessories.
A 1309
Crocodile clip,
green
Crocodile clip assures secure and permanent contact during the measurement on – –         –  –  – – –  –
bus bars, fixing screws, etc.
A 1271
Small soft carrying Small soft carrying bag for transport and
– – – – – – –   – –     – – – –
bag
storage of test instrument or accessories.
A 1310
Crocodile clip assures secure and permaCrocodile clip, blue nent contact during the measurement on – –         – – –  – – –  –
bus bars, fixing screws, etc.
A 1115
Protection case

1. 58
Photo
MI 3108
MI 3109
MI 3105
MI 3101
MI 3102H CL
MI 3102
MI 3100
MI 3125B
MI 3125
MI 2086
MI 2088
MI 3121H
MI 3121
MI 3122
MI 3123
MI 2126
MI 3103
MI 2150
MI 2093
Photo
Selection Guide for EIS Accessories
MI 3108
MI 3109
MI 3105
MI 3101
MI 3102H CL
MI 3102
MI 3100
MI 3125B
MI 3125
MI 2086
MI 2088
MI 3121H
MI 3121
MI 3122
MI 3123
MI 2126
MI 3103
MI 2150
MI 2093
Selection Guide for EIS Accessories
Option
–

Not available
Accessories: page 1.54
Protection case with plastic screen for
protection of the tester against dirt and – – – – – – – – – – – – – – – – –  –
damage.
Accessories: page 1.54
Option
–
Not available
1. 59
Selection Guide for EIS Accessories
Part
number
A 1302
Description
Set of carrying
straps
Target application
MI 3108
MI 3109
MI 3105
MI 3101
MI 3102H CL
MI 3102
MI 3100
MI 3125B
MI 3125
MI 2086
MI 2088
MI 3121H
MI 3121
MI 3122
MI 3123
MI 2126
MI 3103
MI 2150
MI 2093
Photo
ƒƒ High Voltage Insulation / Continuity / Earth
Set of carrying straps for carrying the
measuring instrument around the neck al- – – – – – – –   – – –    – – – –
lowing free hand use of the tester.
ƒƒ Appliance / Machine / Switchboard Safety
ƒƒ Power Quality Analysis
ƒƒ LAN Cabling Certification
ƒƒ Indoor Environment Quality
ƒƒ Digital Multimeters / Clamp Meters /
A 1303
Soft hand strap
Soft hand strap for holding the instrument. – – – – – – –   – – –    – – – –
A 1245
Holder for commander
Holder enables free hand operation with
the tester by fixing the test commander – –      – – – – – – – – – – – –
and other test cables when not in use.
A 1110
Three phase
adapter
3-phase test adapter for installation safety testing on 3-phase sockets type 16 A           – – –  – – – – –
3CEE.
A 1111
Three phase
A 1215
adapter with
(for
switch
MI 2150)
3-phase adapter with selection switch for
installation safety testing on 3-phase sockets type 16 A 3CEE. The adapter allows           – – –  – – –  –
seamless switching between measurements.
A 1171
RS232 / USB
adapter with 1 m
cable
RS232 / USB adapter for instruments with– – – – – – – – –   – – – – – – – –
out USB comunication port.
A 1293
PC SW Eurotest
2Mobile/Smart
phone with modem
and data cable
PC Software Eurotest2Mobile / Smartphone enables Bluetooth connection between
– –   – – – – – – – – – – – – – – –
Smart Mobile phones and Metrel installation
safety testers.
A 1017
Communication
cable RS232
RS232 interface cable for connecting the
– – – – – – – – –   – – – – – – – –
instrument with the PC.
Barcode scanner
Barcode scanner for identification of barcode labelled installation structure ele    – – – – – – – – – – – – – – –
ments like sockets, switches, fuses,
switchboards, etc.
A 1105
AM 1337 RFID HGL
RFID reader
  – – – – – – – – – – – – – – – – –
Voltage and Continuity Testers
ƒƒ Variable transformers /
Equipment for laboratories and Schools
GOOD TO KNOW
High Voltage Insulation / Continuity / Earth
Selection Guide for CONTINUITY Insulation Testers
Selection Guide for HV Insulation Testers
EARTH TESTER
MI 3295 Step Contact Voltage Measuring System
CONTINUITY TESTERS
MI 3252 MicroOhm 100A
MI 3252 MicroOhm 10A NEW MI 3242 MicroOhm 2A NEW HIGH VOLTAGE INSULATION TESTERS
MI 3200 TeraOhm 10 kV MI 3201 TeraOhm 5 kV Plus MI 2077 TeraOhm 5 kV MI 3202 GigaOhm 5 kV PC SOFTWARE
HVLink PRO
DEMONSTRATION BOARD
MI 3299 HV demo BOX
Selection Guide for HV Accessories
2
2
2
-
-
-
02
06
07
2
-
08
2
2
2
-
-
-
10
12
14
2
2
2
2
-
-
-
-
16
18
20
22
2
-
24
2
2
-
-
26
27
CATALOGUE 2012/13

1. 60
Option
–
Not available
Accessories: page 1.54
Accessories: page 2.27
High Voltage Insulation Resistance Diagnostics / Accurate Low Resistance Measurements
ƒƒ Electrical Installation Safety
High Voltage Insulation / Continuity / Earth
MEASURING INSTRUMENTS AND TESTERS
Electrical Installation Safety
Download PDF
Similar pages