QuickSpecs
HP 3PAR StoreServ 7450 Storage
Overview
HP 3PAR StoreServ 7450 Storage
HP 3PAR StoreServ 7450 Storage is the only all-flash array in the industry that delivers the performance advantages of a purposebuilt, flash-optimized architecture without compromising resiliency, efficiency, or data mobility. A flash-optimized architecture
reduces the performance bottlenecks that can choke general-purpose disk arrays that have been retrofitted with solid-state disks
(SSDs). However, unlike other purpose-built flash arrays, the 3PAR StoreServ 7450 doesn't require you to introduce an entirely
new architecture into your environment to achieve flash-optimized performance. As a result, you don't have to sacrifice rich, Tier1 data services, quad 4-node resiliency, advanced functionality, or enterprise-class efficiency, or seamless data mobility between
systems.
HP 3PAR StoreServ 7450 storage delivers performance without compromises.
HP 3PAR StoreServ 7450c Storage
What's New



New lower cost 3.84TB cMLC SSDs available
New 1.92TB FIPS Encrypted cMLC SSD available
HP 3PAR File Persona Software Suite for HP 3PAR StoreServ 7450c
NOTE: The term “HP 3PAR StoreServ 7450 Storage” refers to the whole 7450 family, including both the new HP 3PAR StoreServ
7450 Storage Converged Controller model (7450c) as well as the legacy HP 3PAR StoreServ 7450 Storage model.
Summary
3PAR StoreServ 7450c
Number of Controller Nodes
2 or 4
HP 3PAR Gen4 ASICs
2 or 4
Processors
2 - 4 eight-core 2.3 GHz
Total On-Node Cache
192 GiB
Total On-Node Cache per controller node pair
96 GiB
Maximum Host Ports
24 ports
8Gb/s Fibre Channel Host Ports
4 - 24 ports
16Gb/s Fibre Channel Host Ports
0 - 8 ports
10Gb/s iSCSI and FCoE Host Ports
0 - 8 ports
10Gb/s Ethernet Adapter
0 - 8 ports
1Gb/s Ethernet Adapter
0 - 16 ports
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 1
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Overview
Maximum Initiators Supported
Built-in 1GbE Ports
1024 or 2048
2–4
5
2U Controller Enclosure SAS Drive Capacity
Number of Solid State Drives
Raw Capacity (approx.)
24
6 – 240
0.8 – 921.6 TiB2
1
Usable File Capacity
2 - 256TiB4
Capacity Details
3PAR StoreServ 7450c
RAID Levels
RAID 0, 1, 5, 6
RAID 5 Data to Parity Ratios
2:1 - 8:1
RAID 6 Data to Parity Ratios
4:2, 6:2, 8:2, 10:2, 14:2
Drive Capacities (approximate GB )
(RAID levels, parity ratios, and drive capacities all mixable within
the same Storage System)
480GB MLC SSD3, 920GB MLC SSD3, 480GB cMLC SSD3,
1.92TB cMLC SSD3, 3.84TB cMLC SSD,
Number of Add-on Drive Enclosures
(Each Drive Enclosure holds up to 24 drives in 2U for small form
factor drives and 4U for large form factor drives)
0 - 18 enclosures
2
NOTES:
Maximum raw capacity currently supported with solid state drives.
For storage capacity, 1 GiB = 10243 bytes and 1 TiB = 1024 GiB.
3
SSDs are Solid State Drives.
4
Usable file capacity supported for HP 3PAR File Persona Software Suite.
5
Two built-in 1GbE ports per node pair can be used either for Remote Copy (RCIP) or for File Persona.
1
2
NOTE: Specifications are subject to change without notice.
Host OS Support
Citrix® XenServer® | HP-UX® | HP OpenVMS | IBM® AIX®
Microsoft® Windows® Server, including Microsoft® Hyper-V™
Oracle® Linux® (UEK and RHEL compatible kernels) | Oracle® Solaris
Red Hat® Enterprise Linux® | Red Hat® Enterprise Virtualization
SUSE® Linux Enterprise | Ubuntu | VMware vSphere™
For the latest information on supported operating systems refer to Single Point of Connectivity Knowledge for HP Storage
Products (SPOCK): http://www.hp.com/storage/spock
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 2
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Features
Accelerated
HP 3PAR StoreServ 7450 Storage provides hundreds of thousands of IOPS to allow the highest level of
performance for any application environment. With 3PAR system wide striping, data and I/O for each
volume are striped widely across all system resources including CPUs, Ports, Cache and Drives. This
wide striping enables the system to deliver accelerated performance levels (all resources supporting
each volume) while avoiding any single point of bottleneck. Even a small volume can leverage the
performance of hundreds of flash devices and all the system's controller nodes for optimal
performance. In addition, the massively parallel architecture allows 3PAR to serve the IOPS at submillisecond latency levels, enabling high quality IOPS for each of the applications running on HP 3PAR
7450 storage system.
Quality of Service - With HP 3PAR Priority Optimization, you can consolidate multiple workloads on
high-performing HP 3PAR 7450 Storage system without compromising on performance of their key
applications. A highly automated approach allows you to quickly and easily assign a minimum goal for
I/O per second, bandwidth and latency to protect mission critical applications in enterprise
environments. Or assign performance thresholds on workloads with lower service level requirements.
This capability allow you to consolidate more applications on less infrastructure while delivering
predictable performance to meet even the most demanding service level requirements.
HP 3PAR Express Writes - HP 3PAR Express Writes is a write acceleration feature built in to HP 3PAR OS
version 3.2.1 and later to optimize CPU utilization and, depending on workload, deliver greater
throughput, up to 30 percent more IOPS, and 20 percent reduced latency 1. All currently supported HP
3PAR StoreServ Storage HBAs and hosts also support the HP 3PAR Express Writes feature, and its
benefits extend to both spinning drives and flash-based media.
1
Efficient
Based on a random, 100 percent write workload with an 8K block size.
Reduce capacity requirements and extend flash media lifespan to lower costs. Stretch your Flash
media investment for improved return on investment. 3PAR StoreServ is the only platform to
guarantee to reduce your capacity requirements by 50%. 3PAR StoreServ can also extend the life of
your Flash media by providing additional media endurance.
Get thin and stay thin - Thin technologies unique to the HP 3PAR StoreServ family can reduce capacity
requirements by 50%. Purchase only what you need, as you need it so you can focus resources on
growing your business, not maintaining your storage. Additionally, the HP 3PAR ASIC with Thin Built In
features an efficient, silicon-based zero-detection mechanism. This unique hardware capability gives
HP 3PAR StoreServ Storage the power to remove allocated but unused space without impacting
performance.
Data center virtualization - Increase virtualization return on investment. Double virtual machine
density on your physical servers, spend up to 90 percent less time managing your storage, and
support your virtualization deployment with 50 percent less storage capacity. HP 3PAR StoreServ is
built from the ground up to deliver performance that exceeds the demands of virtualized data centers
along with transformative levels of simplicity, agility, and efficiency.
Do more with less -HP 3PAR StoreServ 7450 Storage delivers hundreds of thousands of IOPS at under
1ms latency with less equipment to house, far fewer disks to power and cool, less hardware to retire
after it has reached its end of life, and a reduced carbon footprint.
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 3
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Features
Bulletproof
Eliminate downtime for performance-critical applications - A unique suite of persistent technologies
power HP 3PAR StoreServ 7450 Storage in delivering high availability and Tier 1 resiliency to
performance critical applications. Achieve higher service levels for more users and applications with
less infrastructure. Deliver higher performance levels, greater availability, and next-generation
functionality to multiple user groups and applications from a single storage system.
High Availability - With the Get 6-Nines Guarantee, HP ensures 99.9999% data availability with all HP
3PAR StoreServ 7450 systems giving you the peace of mind that your performance critical applications
are back with Tier-1 resiliency Intelligent data striping across all available enclosures provides HA
Cage, the ability to maintain availability even when a whole drive enclosure fails. HP 3PAR Persistent
Cache in four node configurations eliminates performance impacts that result from unplanned
component failures, making it a must-have for maintaining service levels in the virtual data center-a
feature that you can't get from any all-flash storage platform built with 2-controllers architecture.
Futureproof
Move data seamlessly across systems and sites to balance performance and cost - HP 3PAR StoreServ
platform is autonomic (or effortless), and delivers polymorphic simplicity from midrange to high end
to flash. Federated data mobility is yet another example of Polymorphic Simplicity. Simply and nondisruptively shift data between any model HP 3PAR StoreServ system without additional management
layers or appliances. This helps balance cost and performance to meet service-level requirements at
the lowest cost while increasing business agility and minimizing risk. HP 3PAR Peer Motion enables
you to move applications that require flash-performance on 7450 at the right time without impacting
its availability. This seamless application movement on and off of flash storage enables you to put
your investment into flash technology to its most optimum usage. Simply and non-disruptively shift
data between any model HP 3PAR StoreServ system without additional management layers or
appliances.
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 4
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Service and Support, HP Care Pack, and Warranty Information
Warranty
3 Year, On-site Warranty Service for hardware components. 7x24 4-hour remote response with next
business day on-site response
The warranty on the following HP 3PAR StoreServ 7000 SSD product numbers is five years, parts only:
HP 3PAR StoreServ M6710 480GB 6G SAS SFF(2.5in) MLC 5yr Wty Solid State Drive
E7W54B
HP 3PAR StoreServ M6720 480GB 6G SAS LFF(3.5in) MLC 5yr Wty Solid State Drive
E7W55B
HP 3PAR StoreServ M6710 920GB 6G SAS SFF(2.5in) MLC 5yr Wty Solid State Drive
E7W24B
HP 3PAR StoreServ M6720 920GB 6G SAS LFF(3.5in) MLC 5yr Wty Solid State Drive
E7W25B
HP 3PAR StoreServ M6710 920GB 6G SAS SFF(2.5in) MLC FIPS Encrypt Solid State Drive
E7Y52A
HP 3PAR StoreServ M6710 480GB 6G SAS SFF(2.5in) cMLC Solid State Drive
E7Y55A
HP 3PAR StoreServ M6720 480GB 6G SAS LFF(3.5in) cMLC Solid State Drive
E7Y56A
HP 3PAR StoreServ M6710 1.92TB 6G SAS SFF(2.5in) cMLC Solid State Drive
E7Y57A
HP 3PAR StoreServ M6720 1.92TB 6G SAS LFF(3.5in) cMLC Solid State Drive
E7Y58A
HP 3PAR StoreServ M6710 1.92TB 6G SAS SFF(2.5in) FIPS Encrypted cMLC Solid State Drive
K0F27A
HP 3PAR StoreServ M6710 3.84TB 6G SAS SFF(2.5in) cMLC Solid State Drive
K2Q91A
Warranty on other HP 3PAR StoreServ 7000 SSDs excluding the ones listed above is 3 years, parts
only.
HP warrants only that the Software media will be free of physical defects for a period of ninety (90)
days from delivery.
For more information about HP's Global Limited Warranty and Technical Support, visit this link.
NOTE: SSDs have a limited number of writes that can occur before reaching the SSD's write endurance
limit. This limit is generally high enough so wear out will not occur during the expected service life of
an HP 3PAR StoreServ under the great majority of configurations, IO patterns, and workloads. HP 3PAR
StoreServ tracks all writes to SSDs and can report the percent of the total write endurance limit that
has been used. This allows any SSD approaching the write endurance limit to be proactively replaced
before they are automatically spared out. An SSD has reached the maximum usage limit once it
exceeds its write endurance limit. Following the product warranty period, SSDs that have exceeded the
maximum usage limit will not be repaired or replaced under HP support contracts.
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 5
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Service and Support, HP Care Pack, and Warranty Information
Service and Support
Technology Services for increased uptime, productivity and ROI
Trust HP storage technology experts for every level of service and support. Our integrated portfolio of
services for storage help customers reduce costs, optimize data, streamline storage management,
and improve backup and recovery. Capitalizing on HP Storage Systems' capabilities requires a service
partner who understands your increasingly complex environment. Team with the people who know HP
infrastructure hardware and software best-the experienced professionals at HP Services.
Protect your business beyond warranty
Warranty protects against manufacturer defects, however warranty uplifts, such as HP Care Pack
Services protect the business-by reducing downtime risks and providing operational consistency for
mission-critical and standard business computing.
What HP Storage Technology Services can do for you
HP Storage Technology Services can help you design, deploy, test, integrate, support, and manage IT
and infrastructure solutions. HP storage lifecycle support services offers a full spectrum of customer
care-from technology support to complex migrations to complete managed services.
Choose the right level of support, deployment and integration services
HP support recommendations are designed to help you enhance technology operations and lower riskand make it easier for you to seek the right balance between affordability and service-level
commitments. Depending on your individual support needs, choose from three levels of care that
cover the entire lifecycle to better address your needs-Optimized Care, Standard Care, and Basic Care.
If none of our support recommendations meet your needs, we can tailor a service solution for your
unique support requirements. Only HP brings together deep expertise, proactive and business critical
support and a strong partner network-together with, a full set of infrastructure services designed to
power a Converged Infrastructure
Optimized Care - delivers
best performance and
stability through
deployment and proactive
management practices
HP Proactive Care Advanced - This service builds and incorporates on Proactive Care Service and also
gives customers personalized technical and operational advice from an assigned, local Account
Support Manager for personalized technical collaboration, flexible access to specialist skills to help
optimize business critical IT, and enhanced Critical Incident Management to help so the business is not
affected if there is a system or device outage.
Additional Option:
3 Year (or) 1 Year HP Proactive Select Credits, HP Data Sanitization Tier 1 Service
Standard Care - maintains
high level of uptime, along
with expert help to cut the
cost and complexity of
implementation and
support
HP Proactive Care 24x7- for a higher return on your storage investment, Proactive Care delivers
hardware and software support services designed specifically for your technology; rapid access to
Advanced Solution Center Specialists plus, Firmware/Software management and best practice advice.
Customers can optimize the return on their IT investment and realize the advantage of running their
business critical applications on virtualized infrastructure. Plus, HP Proactive Select 20 credits per
year, select from an extensive menu of consultancy and technical services, such as onsite firmware
upgrades, health checks, assessments, and education.
Additional Option:
3 Year (or) 1 Year HP Proactive Select Credits, HP Data Sanitization Tier 1 Service
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 6
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Service and Support, HP Care Pack, and Warranty Information
Basic Care - Minimum
recommended support
HP Proactive Care 24x7 - for a higher return on your storage investment, Proactive Care delivers
hardware and software support services designed specifically for your technology; rapid access to
Advanced Solution Center Specialists plus, Firmware/Software management and best practice advice.
Customers can optimize the return on their IT investment and realize the advantage of running their
business critical applications on virtualized infrastructure. Plus, 10 credits per year, select from an
extensive menu of consultancy and technical services, such as onsite firmware upgrades, health
checks, assessments, and education.
Additional Option:
3 Year (or) 1 Year HP Proactive Select Credits, HP Data Sanitization Tier 1 Service
HP Proactive Select is a flexible way to purchase services to fit your particular environment or
situation. Working with an HP Account Support Manager, you select a package of services in the form
of services credits that include proactive services spanning many technologies and processes, such as
on-site firmware upgrades, health checks, assessments, and education. You tailor the service delivery
to improve time to production, optimize performance, or build in continuous improvements.
Implementation
Installation:
Whichever level of care you select, consider our Installation and Startup Services for a smooth
implementation.
HP 3PAR StoreServ 7000 Storage Installation and Startup Service - For smooth startup, this service
provides you with deployment of your HP 3PAR StoreServ 7000 Storage, ensuring proper installation
into your storage environment and helping you realize the maximum benefit from your storage
investment.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-2568ENW.pdf
Related Services
HP Storage Transformation Workshop - Explore data management transformation journey to
business-aligned visions, aligning your specific situation and HP’s experiences.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-9541ENW.pdf
HP 3PAR StoreServ Data Migration - Proven expertise and tools help you migrate data across your
data center or around the globe.
HP 3PAR StoreServ Data Migration Service data sheet - US English (A4)
HP Storage Modernization Service - Modernize your storage to take better advantage of physical or
virtualized server environments.. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-4620ENW.pdf
HP StoreServ Integration Service - Integrate your new HP 3PAR StoreServ system so that it is agile, performs
effectively, and scales to rapid growth.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-9254ENW.pdf
HP EVA to 3PAR Acceleration Service - The HP EVA to 3PAR Acceleration Service can help guide you or
even execute data migration activities on your behalf that can not only optimize, but provide OPEX and
CAPEX savings as a result of your journey from EVA to 3PAR. This service provides customers with an
alternative DIY ("do-it-yourself") data migration option with guidance from TS Storage migration
specialists. With the help of migration experts, this service allows customers to execute an EVA to
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 7
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Service and Support, HP Care Pack, and Warranty Information
3PAR data migration at their own pace and lowered cost.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-4234ENW.pdf
HP SAN Deployment Service - HP delivers complete design and implementation services for Fibre
Channel, FCoE, FCIP, SAS, and iSCSI storage area network (SAN) connectivity components. This service
includes three levels of support based on the type of environment, ranging from simple to more
complex. A trained service specialist guides the implementation of the storage switches in the SAN
environment according to HP quality standards.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-8527EN.pdf
HP Data Replication Solution Service for 3PAR Virtual Copy- HP Data Replication Solution Service for
HP 3PAR Virtual Copy Software helps create, manage and configure local replication data mirroring
and snapshot capabilities of 3PAR storage systems. This service enables snapshots and mirroring to
facilitate data restores, minimize downtime for backups, perform application testing, support data
mining use with decision-support tools.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-0217ENW.pdf
HP Data Replication Solution Service for 3PAR Remote Copy- HP Data Replication Solution Service
for 3PAR Remote Copy Software configures real-time data mirroring between local and remote 3PAR
storage systems to safeguard critical business information. Provides scalable deployment of HP
Remote Copy Software real-time data mirroring between a local and a remote 3PAR storage system.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-8627ENW.pdf
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-9431ENW.pdf
HP 3PAR 7000 Replication Software Suite Installation and Startup Service - Provides
implementation of the HP 3PAR 7000 Replication Software Suite product. Replication Suite includes
3PAR Remote Copy, 3PAR Virtual Copy, and 3PAR Peer Persistence. The service is designed to help get
HP 3PAR 7000 Replication Software Suite up and running quickly and to provide a demonstration of
the product's key features using sample or test data only.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-2570ENW.pdf
HP 3PAR Peer Persistence Software Installation and Startup Service - Provides implementation of
the HP 3PAR Peer Persistence Software product. The service is designed to help get HP 3PAR Peer
Persistence up and running quickly and to provide a demonstration of the product's key features using
sample or test data only.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-2772ENW.pdf
HP 3PAR Adaptive Optimization Policy Implementation Service - HP 3PAR Adaptive Optimization
Policy Implementation Service provides analysis, recommendations, and implementation of HP 3PAR
Adaptive Optimization policies to enable storage tiering using data collected from the HP 3PAR
Storage system over time. With the assistance of a designated IT storage administrator, a service
specialist works with the customer to implement Adaptive Optimization policies on the HP 3PAR
Storage system to help deliver service level optimization for virtual and cloud data centers while
reducing cost, increasing agility and minimizing risk.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENW.pdf
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 8
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Service and Support, HP Care Pack, and Warranty Information
HP Storage Virtual Volume Design and Implementation Service- When redeploying an HP
StorageWorks Disk Array, the HP Virtual Volume Design and Implementation Service provides the
necessary activities required to design and implement a new virtual volume configuration.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3764ENN.pdf
HP Thin Volume Conversion Service - Provides evaluation and execution of conversion from standard
to thin provisioned virtual volumes for HP 3PAR Storage. A service specialist advises the customer on
HP thin provisioning best practices, provides evaluation of potential disk capacity savings if target
virtual volumes are converted, and plans and implements thin conversion processing. The service
leverages 3PAR thin provisioning capabilities to help optimize storage capacity, reduce cost, increase
agility and maintain performance.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENW.pdf
HP Performance Analysis Service for HP Disk Arrays - The service provides data collection, detailed
I/O analysis and enhancement recommendations for HP 3PAR StoreServ Storage disk arrays, HP EVA
P6000 Storage disk arrays and HP XP P9000 Storage disk arrays. HP Performance Analysis Service for
HP Storage Disk Arrays provides a single engagement concerning the performance of a single HP 3PAR
StoreServ Storage disk array, HP EVA P6000 Storage disk array and HP XP P9000 Storage disk array
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6668EN.pdf
HP 3PAR Health Check Service- The HP 3PAR Health Check service is delivered as a single
engagement, providing data collection, analysis, report creation, and a briefing session concerning the
performance of a single HP 3PAR StoreServ Storage System. This health check service is best for HP
3PAR StoreServ Storage Systems that have been installed and are in normal production mode. It can
also be used to establish a baseline for future reference to improve the effective use of your storage
system.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-3225ENW.pdf
HP 3PAR Storage Rebalance Service- The HP 3PAR Rebalance Service helps balance data across your
HP 3PAR StoreServ Storage to take advantage of the capabilities of the array architecture. The service
provides analysis, planning, and implementation of data movement and/or physical movement of
drive magazines within the array.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-0280ENW.pdf
HP EVA to 3PAR Acceleration Service - The HP EVA to 3PAR Acceleration Service can help guide you or
even execute data migration activities on your behalf that can not only optimize, but provide OPEX and
CAPEX savings as a result of your journey from EVA to 3PAR. This service provides customers with an
alternative DIY ("do-it-yourself") data migration option with guidance from TS Storage migration
specialists. With the help of migration experts, this service allows customers to execute an EVA to
3PAR data migration at their own pace and lowered cost.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-4234ENW.pdf
HP 3PAR Dynamic Optimization I&S - For Dynamic Optimization, implementation by HP of tasks
required to balance the HP 3PAR storage system; the service provides the Customer with a product
overview, advice, and suggested strategies for use of Dynamic Optimization, and extended/ongoing
analysis and/or implementation of Dynamic Optimization strategies can be accommodated at
additional cost
The Service has further been described in the HP 3PAR 7000 Software Installation and Startup Service
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 9
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Service and Support, HP Care Pack, and Warranty Information
Datasheet: http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-2569ENW.pdf
Get connected and get back to business
HP Storage Technology Services provide the path to get your HP Storage solutions and your business
connected to HP. Once connected, our experts are able to scan your system and run health checks,
then use that data to create personalized reports and recommendations for actions to take to prevent
problems and downtime.
For more information
http://www.hp.com/services/storage
To learn more on HP Storage Services, please contact your HP sales representative or HP Authorized
Channel Partner
HP Care Pack Services are sold by HP and HP Authorized Service Partners:


Services for customers purchasing from HP or an enterprise reseller are quoted using HP
order configuration tools.
Customers purchasing from a commercial reseller can find HP Care Pack Services at:
http://www.hp.com/go/lookuptool
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 10
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
Step 1 - Choose a Base configuration
HP 3PAR StoreServ 7450 configurations start with the selection of the Base. The Base includes controller nodes, bays for small
form factor drives, and PCIe slots for host adapter cards. SAN Kits are also considered base configurations. The SAN Kits simplify
ordering for SAN configurations with the array and extend the switch warranty to 3-years by including switches with an HP 3PAR
StoreServ 7450 Storage Base.
HP 3PAR StoreServ 7450 Base Configurations
Factory Integrated
in HP rack
Factory Integrated
in HP rack in a Storage
Centric Configuration
Field Integrated
HP 3PAR StoreServ 7450c 2-node Storage Base
E7X87A
HP 3PAR StoreServ 7450c 4-node Storage Base
E7X62A
HP 3PAR StoreServ 7450 2-node Base
C8R35A
HP 3PAR StoreServ 7450 4-node Base
C8R37A
HP 3PAR StoreServ 7450c 2-node for Storage Centric Rack
E7X89A
HP 3PAR StoreServ 7450c 4-node for Storage Centric Rack
E7X93A
HP 3PAR StoreServ 7450 2-node Base for Storage Centric Rack
E7W52A
HP 3PAR StoreServ 7450 4-node Base for Storage Centric Rack
E7W53A
HP 3PAR StoreServ 7450c 2-node Field Integrated Storage Base
E7X91A
HP 3PAR StoreServ 7450c 4-node Field Integrated Storage Base
E7X95A
HP 3PAR StoreServ 7450 2-node Base
C8R35A
HP 3PAR StoreServ 7450 4-node Base
C8R37A




A minimum of one (1) configuration base must be ordered.
The HP 3PAR StoreServ 7450c 2N base configuration includes (2) controller
nodes, 96 GB of cache, (24) small form factor drive bays, (4) built-in 8 Gb/sec
FC ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter
cards - one slot per node, (2) 2m SAS cables, (2) 1U rack filler panels to
reserve 2U of rack space above the 2-node Storage Base for a future
upgrade to a 4-node configuration, (1) mounting rail kit, and power cords.
The HP 3PAR StoreServ 7450c 4N base configuration includes (4) controller
nodes, 192 GB of cache, (48) small form factor drive bays, (8) built-in 8
Gb/sec FC ports, (8) 8Gb shortwave FC SFP, (4) PCIe adapter slots for host
adapter cards - one slot per node, (4) 2m SAS cables, (4) node link cables, (2)
mounting rail kits, and power cords.
The HP 3PAR StoreServ 7450 2-node base configuration includes (2)
controller nodes, 64 GB of cache, (24) small form factor drive bays, (4) builtin 8 Gb/sec FC ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for
host adapter cards - one slot per node, (2) 2m SAS cables, (2) 1U rack filler
panels to reserve 2U of rack space above the 2-node Storage Base for a
future upgrade to a 4-node configuration, (1) mounting rail kit, and power
cords.
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 11
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration



The HP 3PAR StoreServ 7450 4-node base configuration includes (4)
controller nodes, 128 GB of cache, (48) small form factor drive bays, (8)
built-in 8 Gb/sec FC ports, (8) 8Gb shortwave FC SFP, (4) PCIe adapter slots
for host adapter cards - one slot per node, (4) 2m SAS cables, (4) node link
cables, (2) mounting rail kits, and power cords.
All base configurations include (1) built-in 1GbE port for management and
(1) 1GbE port for either Remote Copy over IP or File Persona, per node
(support for File Persona only on 7450c).
*Storage Centric Configuration
o The Storage Centric rack versions of HP 3PAR StoreServ 7450 are
for CTO (factory Configure-To-Order) only. With a Storage Centric
configuration, the storage system gets placed in the center of the
rack so that future expansion of that storage system becomes
easier.
o In Storage Centric configurations, non-3PAR components, with the
exception of certain StoreFabric Storage Networking switches, if
added to the same order, get placed in a separate rack.
The following drawings show example configurations for a HP 3PAR StoreServ 7450
4-node in Storage Centric and non-Storage Centric configurations
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 12
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
HP 3PAR StoreServ 7450c 4N Storage Centric configuration
StoreServ 7450c 4N Storage system StoreServ 7450c 4N Storage system in a
in a storage centric configuration in a non-storage centric configuration in a HP
HP Intelligent Series Rack
Intelligent Series Rack
HP 3PAR StoreServ 7450c/7450 Upgrade Controller Node Pair
Use the HP 3PAR StoreServ 7450c Upgrade Node Pair to convert an existing previously installed HP 3PAR StoreServ 7450c 2N
Storage Base into a 4-node configuration.
HP 3PAR StoreServ 7450c Upgrade Node Pair



E7X92A
Used to upgrade the E7X91A HP 3PAR StoreServ 7450c 2-node Storage Base
to a 4-node configuration.
One (1) pair of controller nodes beyond the base configuration is supported
on the 3PAR StoreServ 7450c.
The 3PAR StoreServ 7450c Upgrade Node Pair includes (2) controller nodes,
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 13
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration

96 GB of cache, (24) small form factor drive bays, (4) built-in 8 Gb/sec FC
ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter
cards - one slot per node, (2) 2m SAS cables, (4) node link cables, (1)
mounting rail kit, and power cords
The upgrade node pair includes (1) built-in 1GbE port for management and
(1) 1GbE port for either Remote Copy over IP or File Persona, per node.
Use the HP 3PAR StoreServ 7450 Upgrade Node Pair to convert an existing previously installed HP 3PAR StoreServ 7450 2-node
Storage Base into a 4-node configuration.
HP 3PAR StoreServ 7450 Upgrade Node Pair




C8R36A
Used to upgrade the C8R35A HP 3PAR StoreServ 7450 2-node Storage Base
to a 4-node configuration.
One (1) pair of controller nodes beyond the base configuration is supported
on the 3PAR StoreServ 7450.
The 3PAR StoreServ 7450 Upgrade Node Pair includes (2) controller nodes,
64 GB of cache, (24) small form factor drive bays, (4) built-in 8 Gb/sec FC
ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter
cards - one slot per node, (2) 2m SAS cables, (4) node link cables, (1)
mounting rail kit, and power cords
The upgrade node pair includes two built-in Gigabit Ethernet ports for
management and Remote Copy over IP.
Step 2 - Choose Host Adapter
Host adapters can be ordered separately to be installed in the field or they can be factory configured into controller nodes. Host
adapter cards provide the array with additional FC ports or with 10Gb/sec iSCSI/FCoE ports. The additional FC ports can be used for
connection to hosts or used to connect to other HP 3PAR StoreServ Storage systems in a Remote Copy relationship. The iSCSI/FCoE
ports permit host connection in iSCSI and FCoE environments.
NOTE: Host adapters used with HP 3PAR StoreServ 7450 are the same as the ones used with HP 3PAR StoreServ 7000 family.
NOTE: Ethernet Adapters can be used only with the HP 3PAR File Persona Software Suite for File services connectivity.
HP 3PAR StoreServ 7000 Host Adapters
HP 3PAR StoreServ 7000 4-port 8Gb/sec Fibre Channel Adapter
QR486A
HP 3PAR StoreServ 7000 2-port 10Gb/sec iSCSI/FCoE Adapter
QR487A
HP 3PAR StoreServ 7000 2-port 16Gb Fibre Channel Adapter
E7X47A
HP 3PAR StoreServ 7000 2-port 10Gb Ethernet Adapter
E7X96A
HP 3PAR StoreServ 7000 4-port 1Gb Ethernet Adapter
E7X97A




Fibre Channel (QR486A, E7X47A) and iSCSI/FCoE Adapters (QR487A) are
used in the Storage Base products (E7X91A, E7X95A, C8R35A, and C8R37A)
and the Upgrade Node Pair (E7X92A, and C8R36A).
Ethernet Adapters (E7X96A, E7X97A) can be used exclusively with the HP
3PAR File Persona Software Suite on the HP 3PAR StoreServ 7450c Storage
Base product (E7X91A, E7X95A) and Upgrade Node Pair (E7X92A).
The 10Gb/s Ethernet Adapter (E7X96A) includes the the 10Gb/s SR SFP+
Because the Storage Base products and the Upgrade Node Pair include builtc04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 14
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration





in FC ports, the host adapter cards are optional.
QR486A and QR487A include one adapter card each. Adapters must be
purchased in pairs.
The QR486A includes (4) 8 Gb/s shortwave FC SFPs. The QR487A includes (2)
10 Gb/s SFPs. The E7X47A includes (2) 16 Gb/s shortwave FC SFPs.
Each node in a node pair (a node pair is composed of the two controller
nodes in a single 2U enclosure) must have the same number and type of
adapters. FC, iSCSI/FCoE, and GbE adapters may not be intermixed in a node
pair.
The 4 ports of the FC adapter can be individually configured to connect to a
host or to a remote array in an RC configuration.
The two ports of the iSCSI/FCoE adapter can be individually configured by
the user as iSCSI or FCoE.
Adapter Configurations permitted on all HP 3PAR StoreServ 7450 systems
Product
Nodes
A*
B*
C*
E7X91A
C8R35A
E7X87A
C8R35A
E7X89A
E7W52A
Node 0
Node 1
Empty
Empty
FC
FC
iSCSI/FCoE
iSCSI/FCoE
E7X92A
C8R36A
Node 2
Node 3
Empty
Empty
FC
FC
iSCSI/FCoE
iSCSI/FCoE
E7X95A
C8R37A
E7X62A
C8R37A
E7X93A
E7W53A
Node 0
Node 1
Node 2
Node 3
Empty
Empty
Empty
Empty
FC
FC
Empty
Empty
iSCSI/FCoE
iSCSI/FCoE
Empty
Empty
D
E
F*
G
H* I*
Empty
Empty
FC
FC
Empty
Empty
iSCSI/FCoE
iSCSI/FCoE
FC
FC
iSCSI/FCoE
iSCSI/FCoE
FC
iSCSI/FCoE
FC
iSCSI/FCoE FC
FC
FC
FC
iSCSI/FCoE
iSCSI/FCoE
iSCSI/FCoE
iSCSI/FCoE
* Factory default configurations for given quantities of adapters.
NOTE: If the configuration includes Remote Copy over Fibre Channel it is recommended that optional Fiber Channel HBAs are
purchased as the built in ports will not offer sufficient connectivity.
Ethernet Adapter Configurations permitted on HP 3PAR StoreServ 7450c
Product
Nodes
A*
B*
E7X91A
E7X87A
E7X89A
Node 0
Node 1
Empty
Empty
Eth
Eth
E7X92A
Node 2
Node 3
Empty
Empty
Eth
Eth
E7X95A
E7X62A
E7X93A
Node 0
Node 1
Node 2
Node 3
Empty
Empty
Empty
Empty
Eth
Eth
Empty
Empty
C
D
E
F*
G*
H*
Empty
Empty
Eth
Eth
Eth
Eth
FC
FC
Eth
Eth
iSCSI/FCoE
iSCSI/FCoE
FC
FC
Eth
Eth
iSCSI/FCoE
iSCSI/FCoE
Eth
Eth
Eth
Eth
Eth
Eth
* Factory default configurations for given quantities of adapters.
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 15
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
NOTE: If the configuration includes Remote Copy over Fibre Channel it is recommended that optional Fiber Channel HBAs are
purchased as the built in ports will not offer sufficient connectivity.
NOTE: Ethernet Adapters can be used only with the HP 3PAR File Persona Software Suite for File services connectivity
available on HP 3PAR StoreServ 7450c
Step 3 - Choose Drive Enclosures
Add drive enclosures to expand the configuration and to add large form factor drives to the configuration. Drive enclosures can be
ordered separately for installation in the field, or they can be factory configured in a rack. Drive enclosures are optional. Because
the Storage Base products and the Upgrade Node Pair include small form factor drive bays, the minimum configuration does not
require any additional drive enclosures. For larger configurations, attach drive enclosures. Each drive enclosure includes 24 drive
bays. The HP 3PAR StoreServ 7450 supports up to four (4) added drive enclosures per node pair. The two drive enclosure types
can be intermixed in a single array.
NOTE: Drive enclosures used with HP 3PAR StoreServ 7450 are the same as the ones used with HP 3PAR StoreServ 7000 family.
HP M6710 2.5 inch 2U SAS Drive Enclosure
HP M6720 3.5 inch 4U SAS Drive Enclosure
Drive Enclosures
HP M6710 2.5 inch 2U SAS Drive Enclosure
QR490A
HP M6720 3.5 inch 4U SAS Drive Enclosure
QR491A
HP M6710 SFF(2.5in) SAS Field Integrated Drive Enclosure
E7X64A
HP M6720 LFF(3.5in) SAS Field Integrated Drive Enclosure
E7X66A









Each drive enclosure includes 24 drive bays, (2) IO modules, (2) 1m SAS
cables, (1) mounting rail kit, and power cables.
The M6710 2U drive enclosure provides 24 SFF drive bays arranged in a
single row.
The M6720 4U drive enclosure provides 24 LFF drive bays, arranged in four
(4) columns of six (6) slots each.
Minimum of zero (0) drive enclosures, maximum of four (4) attached to
C8R35A and E7X91A.
Minimum of zero (0) drive enclosures, maximum of (8) attached to C8R37A
and E7X95A.
Drive enclosures are connected in daisy chains from the SAS ports of the
controller nodes.
The best practice is to balance the drive enclosures across the SAS ports,
remembering that the controller node enclosures include (24) drives
attached to the SAS port labeled DP-1.
The best practice when including LFF and SFF drive enclosures in the same
array is to arrange them in the rack so that all of the 2U enclosures that
belong to one node pair are together and all of the 4U enclosures for that
node pair are together. When connecting the backend SAS cables, intermix
the M6710 and M6720 enclosures on each SAS port.
With a four node configuration, the best practice is to attach the same
number of drive enclosures to each node pair.
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 16
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration



To achieve highest availability in multi-enclosure configurations, configure
a minimum of two (2) enclosures per node pair for RAID 1, a minimum of
four (4) enclosures per node pair if RAID 5 is included, and a minimum of
three (3) enclosures per node pair if RAID 6 is included. Include enclosures
containing node pairs in the count with the M6710 enclosures.
Drive bays that are not filled with a drive must be covered with a drive blank
to preserve proper air flow.
If future capacity upgrades are expected, include enough Drive Enclosures
so that there are some empty bays in each enclosure after all drives are
added.
Step 4 (a) - Choose Encryption (if needed)
At the time of initial system purchase, it must be decided if that system is supposed to be an encrypted system. Encryption
functionality, once turned ON, cannot be turned OFF on a given StoreServ system. If an encrypted system is desired, only
encrypted drives shall be included on the order along with the encryption LTU.
The HP 3PAR StoreServ Data Encryption enables the encryption for all the data that is stored on the internal drives of the 3PAR
StoreServ Storage. The 3PAR Encryption solution encrypts the data so that data cannot be read off a drive that is removed from
the 3PAR Storage. In the event of a failure of the drive or the theft of a drive, the proper authentication key is required to be
entered to gain access to the data stored within the drive. This method of encryption allows the user the comfort knowing all data
contained on the drive is protected against internal and external risks. Organizations within the healthcare industry, financial
services and public sectors are increasingly required to protect their sensitive information (patient records, personal identifying
information, and intellectual property) from threats like unauthorized insider access, accidental disclosure, or theft.
NOTE: Encryption Drives used with HP 3PAR StoreServ 7450 are the same as the ones used with HP 3PAR StoreServ 7000 family.
HP 3PAR StoreServ Data Encryption
HP 3PAR StoreServ 7450 Data at Rest Encryption LTU
HP 3PAR StoreServ 7450 Data at Rest Encryption E-LTU






BC985A
BC985AAE
HP 3PAR StoreServ M6710 920GB 6G SAS SFF(2.5in) FIPS Encrypted MLC Solid State
Drive
E7Y52A
HP 3PAR StoreServ M6710 1.92TB 6G SAS SFF(2.5in) FIPS Encrypted cMLC Solid
State Drive
K0F27A
All drives within a 3PAR StoreServ encrypted array must be self-encrypted devices. There cannot be a mixture of
encrypted drives and non-encrypted drives within the same encrypted array.
Customers have option to turn on encryption, non-disruptively, at any time; even after data has been written to the
system.
* FIPS 140-2 Validated Self-Encrypting Drives (SEDs) have been certified by the U.S. National Institute of Standards and
Technology (NIST) and Canadian Communications Security Establishment (CSE) as meeting the Level 2 security
requirements for cryptographic modules as defined in the Federal Information Processing Standards (FIPS) 140-2
Publication
Strengthen the DAR solution with an optional FIPS 140-2 Level 2 validated external key manager. Supports KMIP 1.1 for
key management. communications.
Supports HP Enterprise Secure Key Manager 4.0 and SafeNet KeySecure k460 and k150 centralized key management.
A data encryption license (LTU) is required to enable encryption on the array. One encryption license is required for each
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 17
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration


encrypted array.
Once encryption is enabled on the HP 3PAR StoreServ Storage, it cannot be disabled.
The local key manager is included in the HP 3PAR OS. There is not a separately orderable part number for the local key
manager.
NOTE: The HP 3PAR 7450 Data at Rest Encryption LTU are valid for both the HP 3PAR StoreServ 7450 and HP 3PAR StoreServ
7450c Storage systems.
Step 4 (b) - Choose Drives
Drives are orderable at the time the array is purchased, or can be added in the future when additional capacity is required. Unlike
other HP 3PAR StoreServ Storage systems where drives are sold in magazines of four, HP 3PAR StoreServ 7000 drives are sold as
single drives. Note that these drives are only compatible with the M6710 and M6720 drive enclosures.
NOTE: SSD Drives used with HP 3PAR StoreServ 7450 are the same as the ones used with HP 3PAR StoreServ 7000 family.
HP 3PAR StoreServ 7450 SAS SSD Drives
HP 3PAR SSDs
HP 3PAR StoreServ M6710 480GB 6G SAS SFF(2.5in) MLC 5yr Wty Solid State Drive
E7W54B
HP 3PAR StoreServ M6720 480GB 6G SAS LFF(3.5in) MLC 5yr Wty Solid State Drive
E7W55B
HP 3PAR StoreServ M6710 480GB 6G SAS SFF(2.5in) cMLC Solid State Drive
E7Y55A
HP 3PAR StoreServ M6720 480GB 6G SAS LFF(3.5in) cMLC Solid State Drive
E7Y56A
HP 3PAR StoreServ M6710 920GB 6G SAS SFF(2.5in) MLC 5yr Wty Solid State Drive
E7W24B
HP 3PAR StoreServ M6720 920GB 6G SAS LFF(3.5in) MLC 5yr Wty Solid State Drive
E7W25B
HP 3PAR StoreServ M6710 1.92TB 6G SAS SFF(2.5in) cMLC Solid State Drive
E7Y57A
HP 3PAR StoreServ M6720 1.92TB 6G SAS LFF(3.5in) cMLC Solid State Drive
E7Y58A
HP 3PAR StoreServ M6710 3.84TB 6G SAS SFF(2.5in) cMLC Solid State Drive
K2Q91A








The minimum recommended initial quantity is eight (8) drives* per node
pair
Minimum upgrade quantity is 4 drives per node pair or 2 drives per
enclosure, whichever is larger. Best practice is to run Autonomic Rebalance
(also known as tunesys) after adding the drives.
All node enclosures must contain either zero (0) or an even number of
drives. All drive enclosures must contain an even number of drives, with a
minimum of two.
Minimum raw capacity is 0.8TB per node pair.
Best practice is to add equal numbers of drives to all enclosures compatible
with the drive type being added.
With a four node configuration, the best practice is to attach the same
number and type of drives to each node pair.
Small Form Factor (SFF)-specific configuration practices
o SFF drives may be loaded into the Storage Base enclosures, the
Upgrade Node Pair enclosure and the M6710 drive enclosure.
o SFF drives must be loaded in pairs of identical drives, beginning
with the leftmost slot, slot 0, and filling to the right, leaving no
empty slots between drives.
Large Form Factor (LFF)-specific configuration practices
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 18
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
LFF drives may be loaded into the M6720 drive enclosure.
LFF drives must be loaded in pairs of identical drives starting at the
bottom of a column, leaving no empty slots between drives in the
column. It is permitted to have empty columns between columns
containing drives. Different columns do not have to contain the
same number of drives.
o An all LFF drive configuration is permitted, leaving the Storage
Base Enclosure empty.
SSD specific configuration practices
o SSD-only configurations are permitted.
o Maximum of 120 SSDs per node pair.
o The SFF and LFF SSDs allow the user to create SSD volumes that
stripe across SFF and LFF enclosures.
* 8 drives support RAID 1 and RAID 5. For RAID 6 choose 12 drives.
o
o


Step 5 - Choose Service Processor Implementation
The HP 3PAR Service Processor monitors the HP 3PAR StoreServ 7450 and enables remote monitoring and remote servicing of the
array. The key capabilities of the Service Processor is to:


Enable rapid, proactive response to issues
Provide a secure communication channel between the customer's data center and HP 3PAR Central for:
o Remote Online Software Upgrade; upgrade software with no application disruption
o Remote Diagnostics; key diagnostic information maintained centrally on a historical basis
o Remote Serviceability; provides fast predictive response and remediation
Each HP 3PAR StoreServ 7000 requires its own Service Processor. The Service Processor functions as the communication interface
between a customer's IP network and HP 3PAR Central by managing all service-related communications. The Service Processor
leverages the industry-standard HTTP over Secure Sockets Layer (HTTPS) protocol to secure and encrypt data communication.
Virtual Service Processor
The Service Processor can be deployed either as a Virtual Service processor or a Physical Service Processor. A Virtual Service
Processor (VSP) is included free with the 3PAR Base Operating System. The Virtual Service Processor can be installed on a that is
provided by the customer before installation that, meet the following specifications:


Virtualization operating system
o VMware vSphere ESXi 4.1, 5.0, 5.1, 5.5
o Microsoft Hyper-V Server 2008 R2, 2012, 2012 R2
Server features
o 2 GB RAM (minimum for the VSP Virtual Machine)
o 256 GB free disk space (minimum for the VSP Virtual Machine)
NOTE: VSP storage must not reside on the array it is managing.
o DVD ROM or DVD RW
o 1 Gb Ethernet port
o For VSP on VMware, the server must be listed in the VMware Compatibility Guide
o For VSP on Hyper-V, the server must be listed on the Windows Server Catalog
The customer must provide any hardware required to host the remote support software when deploying a Virtual Service
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 19
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
Processor. For scheduled service calls, the customer shall make the Virtual Service Processor available to HP for remedial activities
at the agreed-upon time. The customer is responsible for maintaining the appropriate HP 3PAR Remote Support Technology with a
secure connection to HP and any passwords required to access the local network and Virtual Service Processor. The customer is
responsible for providing all necessary resources in accordance with the HP 3PAR Service Processor Release Notes in order to
enable the delivery of the service and options. Please contact a local HP representative for further details on requirements,
specifications, and exclusions.
The physical Service Processor is a dedicated storage appliance located within the storage rack providing close proximity to the
HP 3PAR StoreServ 7000 Storage. The physical Service Processor is fully supported and maintained by HP Services. The physical
Service Processor has serial port connectivity that provides maintenance access for trouble shooting capabilities. If a VMware
server is not available to run the virtual Service Processor, the physical Service Processor is the alternative choice for remote
monitoring and remote service.
HP 3PAR Policy Server
HP 3PAR Policy Server works to implement customer-configurable remote service access policies. Installed on a customerprovided host, Policy Server provides the customer with ultimate flexibility and control to allow or deny outbound communication
or remote service connections to and from an HP 3PAR StoreServ Storage system. Policy Server also serves as the centralized
point for collecting and storing audit logs of all diagnostic data transfers and authorized remote service connections to and from
all configured HP 3PAR Storage systems. HP 3PAR Policy Server provides the





The customer has complete control over policy administration.
A centralized policy administration for all HP 3PAR Storage systems is provided.
A centralized audit log to facilitate security audits is provided.
Up to 100 3PAR systems can be managed with a single 3PAR Policy Server license
Policy Server 6.1.5 can be run on a Virtual Machine. For the latest information on supported hypervisors, refer to Single
Point of Connectivity Knowledge for HP Storage Products (SPOCK): http://www.hp.com/storage/spock
HP 3PAR Policy Manager Software LTU
TE400B
Step 6 - Choose Cables for host connection and remote copy connection
The optical cables listed below support 8 Gb/s FC and 10 Gb/s iSCSI/FCoE for host connect (FC and iSCSI/FCoE) and for Remote Copy
connections (FC only). The copper1GbE cables are used for Remote Copy over IP or File Persona and for connection to the
Management Port.
Cables
FC and 10GbE
HP 3PAR 4m 50/125 (LC-LC) Fiber Cable
QL281B
HP 3PAR 6m 50/125 (LC-LC) Fiber Cable
QR631A
HP 3PAR 10m 50/125 (LC-LC) Fiber Cable
QL266B
HP 3PAR 25m 50/125 (LC-LC) Fiber Cable
QR593A
HP 3PAR 50m 50/125 (LC-LC) Fiber Cable
QL267B
HP 3PAR 100m 50/125 (LC-LC) Fiber Cable
QL268B
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
QK732A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
QK733A
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 20
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
1GbE
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A
HP 4.3m/14ft CAT5 RJ45 M/M Ethernet Cable
C7536A
HP 7.6m/25ft CAT5 RJ45 M/M Ethernet Cable
C7537A
HP 15.2m/50ft CAT5 RJ45 M/M Ethernet Cable
C7542A
Direct Attach Copper Cables* HP 3COM
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
HP ProCurve
HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
J9281B
HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
J9283B
HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable
J9285B
HP X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable
J9286B
HP X242 10G SFP+ to SFP+ 15m Direct Attach Copper Cable
J9287B
Brocade
HP B-series SFP+ to SFP+ Active Copper 1.0m Direct Attach Cable
AP818A
HP B-series SFP+ to SFP+ Active Copper 3.0m Direct Attach Cable
AP819A
HP B-series SFP+ to SFP+ Active Copper 5.0m Direct Attach Cable
AP820A
Cisco
HP C-series SFP+ to SFP+ Active Copper 7.0m Direct Attach Cable
QK701A
NOTE: *The Direct Attach Support is available only for iSCSI protocol and is
available only with HP 3PAR OS version 3.1.3 and later
Step 7 - Choose Racking Options
The HP 3PAR StoreServ 7450 is compatible with most industry standard 4-post EIA 19 inch racks with square mounting holes,
including the HP Intelligent Series Rack and the HP 10000 G2 Series Rack. The HP 3PAR StoreServ 7450 can be factory configured
and shipped in a rack or shipped without a rack for field integration into an existing rack. The rack used for factory integration is the
HP Intelligent Series Rack.
HP Rack and Rack Options
Factory
Integration
Select a rack to house your HP 3PAR StoreServ 7450.
NOTE: The HP Intelligent Series Rack is the only series supported for factory configuration.
Primary
Configuration
Rules
The HP 3PAR StoreServ 7450 will be configured into an HP Intelligent Series Rack with the
appropriate power distribution units (PDUs). If other products such as servers or back-up products
are included in the cab, a different PDU will be added (if required) or can be chosen from a list of
appropriate offerings shown in the configuration tool. The HP Intelligent Series Rack must be
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 21
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
purchased for factory configuration. Additional 3PAR StoreServ 7450 controller node enclosures
and drive enclosures may be ordered for multiple subsystem integration at the factory.
The 3PAR StoreServ 7450 is also supported in HP 10000 G2 Series racks for field installation.
When calculating available U-space, assume that no space will be placed between the mounted
components. For redundancy, order PDUs in quantities of two. Refer to the Configuration and User
Guide in the Information Library at the Rack Solutions webpage.
HP Intelligent
Series Racks
NOTE: The number of components that will fit in a rack varies and is determined by the interior Uspace of the rack.
HP 647 1075mm Shock Intelligent Rack
BW912A
HP 47U 1075mm Side Panel Kit
BW915A
HP 642 1075mm Shock Intelligent Rack
BW904A
HP 42U 1075mm Side Panel Kit
BW906A
HP 636 1075mm Shock Intelligent Rack
BW896A
HP 36U 1075mm Side Panel Kit
BW898A
HP 622 1075mm Pallet Intelligent Series Rack (22U) (available in a later release)
BW893A
For more information on the HP rack offerings, please see the following URL:
http://h18004.www1.hp.com/products/servers/platforms/rackandpower.html.
For more information on rack options, see: http://www.hp.com/products/rackoptions.
For more information on PDUs, see:
http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/pdu.html.
HP PDU Pivot Kit HP EVA PDU Pivot Kit
AG730A
Used to reclaim 2U of space in an HP Intelligent Series Rack with HP 3PAR StoreServ 7000
configurations. This kit allows the PDUs to be placed in the back of the rack without requiring any
rack U space.
NOTE: The use of the PDU Pivot Kit is strongly recommended and is the default option when orders
are configured, as it will save 2U of valuable rack space.
NOTE: 0D1 will appear after this part number to indicate factory integration where appropriate.
Performance
Optimized Data
Centers
HP 3PAR StoreServ 7450 Storage is qualified for use in HP Performance Optimized Data Centers.
Go to http://www.hp.com/go/POD for more information.
Non-HP rack and The Storage Bases, the Upgrade Node Pair, and the Drive Enclosures include mounting rails that
power
are compatible with industry standard 4-post EIA 19 inch racks with square mounting holes. For
requirements
detailed information on determining compatibility of a non-HP rack, please review the information
included in the HP 3PAR StoreServ 7450 User Guide.
Expansion Options
HP provides a variety of SAS cable kits to allow expansion of the HP3PAR StoreServ 7450. Note that the Storage Base products, the
Upgrade Node Pair and the Drive Enclosures all include SAS cables. Most configurations will not require a SAS expansion cable kit.
SAS expansion
cable kit
HP 6 Meter Expansion Cable Kit
AP879A
If an HP 3PAR StoreServ 7450 needs to be expanded into an adjacent rack, one 6 meter SAS
expansion cable kit is required for every node pair that must access drive enclosures in the
expansion rack. Each 6 meter SAS expansion cable kit contains four 6 meter SAS cables.
HP 2 Meter Expansion Cable Kit
AW566A
f an HP 3PAR StoreServ 7450 needs to be expanded within the same rack, but the new drive
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 22
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
enclosure must be located some distance from the nearest existing drive enclosure within the
same rack, one or two 2 meter SAS expansion cable kits is needed, depending on configuration.
Each 2 meter SAS expansion cable kit contains two 2 meter SAS cables.
HP 1 Meter SAS Expansion Cable Kit
QR514A
The 1 meter SAS expansion cable kit is provided for cases where a shorter SAS cable is required.
Each 1 meter SAS expansion cable kit contains two 1 meter SAS cables.
NOTE: The 2-node Storage Bases and Upgrade Node Pair come with four 2 meter SAS cables each
and the 4-node Storage Base comes with eight 2 meter SAS cables. The Drive Enclosures come
with two 1 meter SAS cables each.
Step 8 - Choose Software
HP provides an extensive selection of features for HP 3PAR StoreServ Storage. All of the features available on the HP 3PAR
StoreServ 10000 Storage system are also available on the HP 3PAR StoreServ 7450 Storage system, the result of a common
architecture that spans from small and medium businesses to the largest global enterprise. For convenient ordering, the 3PAR
StoreServ 7450 provides the features in Suites.
Two types of software licensing methods are employed with the HP 3PAR StoreServ 7450. Some software titles are licensed per
system; other titles are licensed by drive. With system-based licensing one license covers the whole array, independent of
configuration or capacity. Drive-based licensing, in contrast, is licensed per installed drive. A software title with drive-based
licensing includes two Licenses to Use (LTU), a Base LTU that enables the software feature for the system and a Drive LTU that
licenses the use of one drive. For each software title, purchase one Base LTU per title per array, and one Drive LTU, for every drive,
that is installed in the array, independent of drive type. For the HP 3PAR StoreServ 7450 there is no Drive LTUs cap. For the HP
3PAR StoreServ 7450c the Drive LTUs cap at 168. After reaching the cap, you do not need to purchase any more Drive LTUs for that
title.
NOTE: All the HP 3PAR 7450 Software LTU are valid for both the HP 3PAR StoreServ 7450 and HP 3PAR StoreServ 7450c Storage
systems.
For more information regarding HP 3PAR software see http://h18006.www1.hp.com/storage/solutions/3par/software.html.
HP 3PAR 7450 Operating System Software Suite (Required)
HP 3PAR OS SW
Suite - 3PAR
Operating
System, System
Setup, and
Management
Software
HP 3PAR 7450 Operating System Software Suite is the foundation software of HP 3PAR StoreServ
7450 Storage, combining advanced virtualization capabilities with simple storage management,
high efficiency, and world class performance. The included comprehensive thin provisioning
capabilities allow your storage to start thin, get thin and stay thin. System Tuner and Autonomic
Rebalance help maintain high performance over time. Migrating your existing data from HP EVA,
EMC CX4 or EMC VNX Storage and 3PAR systems to HP 3PAR StoreServ 7450 is easy with the
included 1 year Online Import license. HP 3PAR SmartStart Software, included in the suite, guides
you through the configuration of the service processor, HP 3PAR StoreServ Storage and the
application hosts - making storage setup quick and easy. HP 3PAR 7450 Operating System
Software Suite is a required purchase. It uses drive-based licensing. For more information see
http://www.hp.com/go/3PAR.
HP 3PAR 7450 Operating System Software Suite Base LTU
HP 3PAR 7450 Operating System Software Suite Base E-LTU
HP 3PAR 7450 Operating System Software Suite Drive LTU
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
BC890B
BC890BAE
BC891A
Page 23
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
HP 3PAR 7450 Operating System Software Suite Drive E-LTU
BC891AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR 7450 Replication Software Suite
HP 3PAR 7000
Replication
Software Suite Local
Replication,
Remote
Replication and
Transparent
Failover
The HP 3PAR Replication Software Suite offers automatic replication, transparent failover and
Point-in-Time (PIT) copies enabling seamless disaster recovery for critical data. These features
provide an agile, efficient and simple solution to protect against the unpredictable. This suite is
ideal for virtualized data centers demanding data availability and business continuity 24x7. HP
3PAR 7450 Replication Software Suite consists of HP 3PAR Remote Copy Software, HP 3PAR Peer
Persistence Software and HP 3PAR Virtual Copy Software, which are also available separately.
Replication Software Suite uses drive-based licensing. For more information see
NOTE: The Peer Persistence feature provides transparent failover in VMware cluster environments
and requires the Remote Copy feature as a prerequisite.
HP 3PAR 7450 Replication Software Suite Base LTU
HP 3PAR 7450 Replication Software Suite Base E-LTU
HP 3PAR 7450 Replication Software Suite Drive LTU
HP 3PAR 7450 Replication Software Suite Drive E-LTU
BC892A
BC892AAE
BC893A
BC893AAE
NOTE: If the configuration includes Remote Copy over Fibre Channel it is recommended that optional Fiber Channel HBAs are
purchased as the built in ports will not offer sufficient connectivity
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR 7450 Security Software Suite
HP 3PAR 7000
Security
Software Suite
HP 3PAR 7450 Security Software Suite provides secure administrative segregation of users and
hosts, allowing individual user groups and applications to confidently share a 3PAR StoreServ
7450 system. It also allows you to secure volumes and copies so they cannot be deleted, even by a
3PAR StoreServ 7450 user with the highest level privileges. When coupled with reservationless,
non-duplicative, read-only virtual copies (snapshots), the Virtual Lock feature enables you to
retain frozen, point-in-time copies of your data to assist internal data retention and simplify
compliance with internal governance procedures. HP 3PAR 7450 Security Software Suite consists
of HP 3PAR Virtual Domains Software and HP 3PAR Virtual Lock Software, which are also available
separately. Security Software Suite uses drive-based licensing.
HP 3PAR 7450 Security Software Suite Base LTU
HP 3PAR 7450 Security Software Suite Base E-LTU
HP 3PAR 7450 Security Software Suite Drive LTU
HP 3PAR 7450 Security Software Suite Drive E-LTU
BC908A
BC908AAE
BC909A
BC909AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR 7450 Data Optimization Software Suite
HP 3PAR 7450
The HP 3PAR 7450 Data Optimization Software Suite makes sure that data is on the right storage
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 24
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
Data
Optimization
Software Suite Rebalance,
Redistribute,
and Refresh
asset at the right time. This suite rebalances, redistributes and refreshes storage non-disruptively
with features that provide autonomic storage tiering and dynamic data mobility, reducing cost and
increasing agility. HP 3PAR 7450 Data Optimization Software Suite consists of HP 3PAR Priority
Optimization , HP 3PAR Dynamic Optimization, HP 3PAR Adaptive Optimization and HP 3PAR Peer
Motion (providing federation capability for data mobility), which are also available separately.
Data Optimization Software Suite uses drive-based licensing. For more information see
NOTE: The Adaptive Optimization feature requires HP 3PAR Reporting Software Suite as a
prerequisite.
HP 3PAR 7450 Data Optimization Software Suite V2 Base LTU
HP 3PAR 7450 Data Optimization Software Suite V2 Base E-LTU
HP 3PAR 7450 Data Optimization Software Suite V2 Drive LTU
HP 3PAR 7450 Data Optimization Software Suite V2 Drive E-LTU
BD272A
BD272AAE
BD273A
BD273AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR 7450c File Persona Software Suite
HP 3PAR File
Persona
Software Suite
– Converged
Block, File and
Object Access
The HP 3PAR File Persona Software Suite is a licensed feature of the 3PAR OS that enables a rich set
of file protocols and core file data services on a 3PAR StoreServ system. As a feature of the 3PAR OS,
the File Persona inherits the industry leading architecture and Block Persona benefits of 3PAR
StoreServ. It extends the spectrum of primary storage workloads natively addressed by 3PAR
StoreServ from virtualization, databases, and applications via the Block Persona to also include
client workloads such as home directory consolidation, group/department shares, and corporate
shares via the File Persona – all with truly Converged Controllers, truly agile capacity, and truly
unified management.
The File Persona is supported on the 3PAR StoreServ 7450c. It requires the installation of 1GbE
(E7X97A) or 10GbE (E7X96A) network cards.
For more information see http://www.hp.com/go/3PAR/FilePersona
NOTE: The File Persona feature requires HP 3PAR 7450 Operating System Software Suite as a
prerequisite.
HP 3PAR 7450c File Persona Software Suite 1TB LTU
HP 3PAR 7450c File Persona Software Suite 1TB E-LTU
BD411A
BD411AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR 7450 Reporting Software Suite
HP 3PAR
Reporting
Software Suite Historical
Performance and
Capacity
The HP 3PAR 7450 Reporting Software Suite includes System Reporter, a historical performance
and capacity management tool for storage reporting, monitoring, and troubleshooting. Also
included is 3PARInfo, a command line tool that allows you to view HP 3PAR StoreServ Storage
configuration information. Reporting Software Suite uses system-based licensing. For more
information see
HP 3PAR 7450 Reporting Suite LTU
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
BC914B
Page 25
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
Management
Tool
HP 3PAR 7450 Reporting Suite E-LTU
BC914BAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR Application Software Suite for Oracle
HP 3PAR
Application
Software Suite
for Oracle Application
Protection
The HP 3PAR Application Software Suite for Oracle provides everything you need for protecting
Oracle databases, including Recovery Manager for Oracle and Oracle Space Reclamation
capabilities. Recovery Manager for Oracle is an extension to 3PAR Virtual Copy that intelligently
creates, manages, and presents time-consistent snapshot images of Oracle® databases for rapid
application recovery, near-continuous data protection, data sharing, and non-disruptive backup.
Application Software Suite for Oracle uses system-based licensing. For more information see.
NOTE: HP 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the HP
3PAR Replication Software Suite.
HP 3PAR 7450 Application Suite for Oracle LTU
HP 3PAR 7450 Application Suite for Oracle E-LTU
BC918B
BC918BAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR Application Software Suite for SQL
HP 3PAR
Application
Software Suite
for SQL Application
Protection
The HP 3PAR Application Software Suite for SQL protects Microsoft® SQL databases with Recovery
Manager for Microsoft® SQL and the 3PAR VSS Provider software. 3PAR Recovery Manager for
Microsoft® SQL Server is an extension to 3PAR Virtual Copy that eases costs and administration by
providing rapid, affordable online recovery of Microsoft® SQL Server databases from multiple,
highly granular point-in-time snapshots. Quickly recover a database to a known point in time,
speeding up a variety of operations including rapid recovery of the production SQL server.
Application Software Suite for SQL uses system-based licensing. For more information see
NOTE: HP 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the HP
3PAR Replication Software Suite.
HP 3PAR 7450 Application Suite for Microsoft SQL LTU
HP 3PAR 7450 Application Suite for Microsoft SQL E-LTU
BC917B
BC917BAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR Application Software Suite for Exchange
HP 3PAR
Application
Software Suite
for Exchange Application
Protection
The HP 3PAR Application Software Suite for Exchange provides you the essentials for protecting
your Microsoft Exchange data, including Recovery Manager for Exchange and the VSS Provider
software. Recovery Manager for Exchange is an extension to 3PAR Virtual Copy that intelligently
creates and manages snapshots that can be used to quickly restore Exchange instances or
databases (or non-disruptively back them up to tape) for near-continuous data protection.
Application Software Suite for Exchange uses system-based licensing. For more information see
http://h18006.www1.hp.com/storage/software/3par7000/as-exchange/index.html.
NOTE: HP 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the HP
3PAR Replication Software Suite.
HP 3PAR 7450 Application Suite for Microsoft Exchange LTU
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
BC916B
Page 26
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
HP 3PAR 7450 Application Suite for Microsoft Exchange E-LTU
BC916BAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR Application Software Suite for VMware
HP 3PAR
Application
Software Suite
for VMware Application
Protection
The HP 3PAR Application Software Suite for VMware provides everything you need to make your
VMware environment more agile and efficient-including Recovery Manager for VMware, Host
Explorer for VMware, VASA support, and three essential plug-ins: the VMware Site Replication
Manager (SRM) Adapter, the 3PAR VAAI plug-in, and the 3PAR management plug-in for VMware
View. Application Software Suite for VMware uses system-based licensing. For more information
see.
NOTE: HP 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the HP
3PAR Replication Software Suite.
HP 3PAR 7450 Application Suite for VMware LTU
HP 3PAR 7450 Application Suite for VMware E-LTU
BC915B
BC915BAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR Application Software Suite for Microsoft Hyper-V
HP 3PAR
Application
Software Suite
for Hyper-V Application
Protection
The HP 3PAR Application Software Suite for Hyper-V provides you the essentials for protecting
your Microsoft Hyper-V environment, including Recovery Manager for Hyper-V and the VSS
Provider software. Recovery Manager for Hyper-V is an extension to 3PAR Virtual Copy that
intelligently creates and manages snapshots that can be used to quickly restore Hyper-V VMs (or
non-disruptively back them up to tape) for near-continuous data protection. Application Software
Suite for Hyper-V uses system-based licensing.
NOTE: HP 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the HP
3PAR Replication Software Suite.
HP 3PAR 7450 Application Suite for Microsoft Hyper-V LTU
HP 3PAR 7450 Application Suite for Microsoft Hyper-V E-LTU
BD190B
BD190BAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP Cluster Extension Software
HP Cluster
Extension
Software- High
Availability
HP Cluster Extension Software (CLX) offers protection against application downtime from fault,
failure, or site disaster by extending a local cluster between data centers over metropolitan
distance. CLX reinstates critical applications at a remote site within minutes or seconds after an
adverse event. CLX integrates with the OS clustering software (such as MS Cluster Service in
Windows) and the remote mirroring software on storage (such as HP 3PAR Remote Copy Software
on HP 3PAR systems) to automate failover and failback between sites. This dual integration
enables the cluster service to verify the status of the storage as well as the server cluster; thus
allowing the correct failover and failback decisions to be made which minimize downtime, and
accelerates recovery without human intervention. Thus the Cluster Extension Software can help
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 27
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
customers achieve 'zero' RPO and RTO in minutes or seconds. For more information, including how
Cluster Extension Software is licensed, see
http://h18006.www1.hp.com/storage/software/ces/index.html.
HP StoreFront Remote SaaS Portal
HP StoreFront
Remote SaaS
Portal
The HP StoreFront Remote SaaS Portal provides proactive tools and integrated data collection
from the HP 3PAR StoreServ Storage arrays that call home to deliver unique insights and analytics
all in one dashboard. Identify capacity and performance issues early through intuitive capacity
and performance trend analysis and forecasting. These valuable analytics help maximize asset
utilization and optimize the datacenter with recommendations and remedial actions when issues
arise. Users can log into http://www.storefrontremote.com to claim their arrays and get access for
free.
Step 9 - Choose Options for Storage Networking
HP's comprehensive portfolio of Storage Area Network infrastructure products and solutions are designed to meet a range of
storage networking needs from small and midsized businesses to the largest corporate enterprises. HP StoreFabric storage
networking SAN Solutions deliver scalability, performance, and broad interoperability required for critical data and applications.
For additional details on SAN infrastructure components and options and storage compatibility information, please visit:
http://hp.com/go/san or select from the part numbers below.
Fibre Channel
Host Bus Adapters
Brocade Fibre Channel HBAs
HP 81B 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
AP769B
HP 82B 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AP770B
Emulex Fibre Channel HBAs
HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
AJ762B
HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AJ763B
QLogic Fibre Channel HBAs
Fibre Channel Switches
HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
AK344A
HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AJ764A
HP B-series
8 Gb Fibre Channel Switches
HP 8/8 Base (0) e-port SAN Switch
AM866B
HP 8/8 (8) Full Fabric Ports Enabled SAN Switch
AM867B
HP 8/24 Base (16) Full Fabric Ports Enabled SAN Switch
AM868B
16 Gb Fibre Channel Switches
HP SN3000B 16Gb 24-port/12-port Active Fibre Channel Switch
QW937A
HP SN3000B 16Gb 24-port/24-port Active Fibre Channel Switch
QW938A
HP SN6000B 16Gb 48-port/24-port Active Fibre Channel Switch
QK753B
HP SN6000B 16Gb 48-port/48-port Active Fibre Channel Switch
QR480B
HP SN6000B 16Gb 48-port/24-port Active Power Pack+ Fibre Channel Switch
QK754B
HP SN6000B 16Gb 48-port/48-port Active Power Pack+ Fibre Channel Switch
QR481B
FCoE, Extension and Embedded Switches
HP 1606 FCIP 4-pt Enabled 8Gb FC 2-pt Enabled 1GbE Base Switch
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
AP862B
Page 28
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
HP 1606 FCIP 16-pt Enabled 8Gb FC 6-pt Enabled 1GbE Full Switch
AP863B
HP 1606 FCIP 16-pt Enabled 8Gb FC 6-pt Enabled 1GbE Power Pack+ Switch
AP864B
Brocade 8/12c SAN Switch for BladeSystem c-Class
AJ820B
Brocade 8/24c SAN Switch for BladeSystem c-Class
AJ821B
Brocade 8/24c Power Pack+ SAN Switch for BladeSystem c-Class
AJ822B
HP H-series
HP 8/20q Fibre Channel 8-ports Active Switch
NOTE: 8 device ports active, upgradeable to 20 device ports active
AQ233B
HP 8Gb Simple SAN Connection Kit
NOTE: 8 device ports active, upgradeable to 20 device ports active
AK241B
HP 8/20q Fibre Channel Switch
NOTE: 16 switch ports active, upgradeable to 20 device ports active
AK242B
HP SN6000 Stackable 8Gb 24-port Single Power Fibre Channel Switch
NOTE: 20 device ports active/4 stacking (ISL) ports active
AW575B
HP SN6000 Stackable 8Gb 24-port Dual Power Fibre Channel Switch
NOTE: 20 device ports active/4 stacking (ISL) ports active
AW576B
HP SN6000 Stackable 12-port Single Power FC Switch
NOTE: 8 device ports/4 stacking (ISL) ports active, upgradeable to 20 device
ports active
BK780B
HP C-series
HP SN6000C 8Gb 16-port Fibre Channel Switch
AW585A
HP SN6000C 8Gb 32-port Fibre Channel Switch
AW586A
Cisco MDS 8/12c Fabric Switch for HP BladeSystem c-Class
AW563A
Cisco MDS 8/24c Fabric Switch for HP BladeSystem c-Class
AW564A
Cisco MDS 9124 8-ports Active Fabric Switch
AG646A
Cisco MDS 9124 16-ports Active Fabric Switch
AG647A
HP Intelligent Infrastructure
Analyzer Software (IIAS)
HP Intelligent Infrastructure Analyzer Software LTU
TC400A
HP Intelligent Infrastructure
Analyzer Software (IIAS)
HP Intelligent Infrastructure Analyzer Software E-LTU
HP Virtual Connect
HP 3PAR StoreServ 7000 Storage supports direct attach with HP Virtual Connect
FlexFabric. Please refer to SPOCK for HP Virtual Connect information.
http://h20272.www2.hp.com/index.aspx
TC400AAE
An online monitoring and diagnostic solution intended to manage the physical
layer of a Storage Area Network (SAN) consisting of HP B-series and/or H-series
Fibre Channel switches and directors. It uses industry-standard protocols (such
as SNMP, SMI-S, Telnet) to monitor the physical layer across the SAN and to
diagnose changes/events in Small Form-factor Pluggable (SFP) transceiver
states/characteristics. It also presents the SAN topology, inventory and
diagnostic information to the user in real-time.
PremierFlexOM4 cable options HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
QK732A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
QK733A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 29
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
OM3 FC LC-LC cables options
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
AJ833A
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
AJ834A
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
AJ835A
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
AJ836A
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ837A
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
AJ838A
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
AJ839A
Step 10 - Federation / Data Migration
HP provides several ways to migrate your data from older arrays. Peer Motion provides federation with other 3PAR arrays, which
includes the ability to migrate data to HP 3PAR StoreServ 7450 Storage.
(Peer Motion is part of the HP 3PAR 7450 Data Optimization Software Suite). Peer Motion Software is also available as a
standalone license
HP 3PAR Peer Motion
Software
HP 3PAR 7450 Peer Motion Software Base LTU
BC906A
HP 3PAR 7450 Peer Motion Software Drive LTU
BC907A
* Insert AE at the end of a part number for an electronic LTU (XXXXXAAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
Online Import allows you to easily migrate data from HP EVA, EMC CX4 or EMC VNX Storage arrays to the HP 3PAR StoreServ 7450,
a 1 year Online Import license is built into the HP 3PAR 7450 Operating System Software Suite. Additional licenses are available to
order.
HP 3PAR Online Import
Software
HP 3PAR 7450 Online Import Software 180 day LTU
BD195A
* Insert AE at the end of a part number for an electronic LTU (XXXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
In addition HP supports the MPX200.
HP MPX200 Multi-protocol and Heterogeneous Data Migration
The HP MPX200 Multiprotocol Router provides support for HP 3PAR StoreServ 7000 and 10000 as well as 3PAR F/T, including
1GbE iSCSI and 10GbE iSCSI and FCoE target support. MPX200 iSCSI provides an alternative option for HP 3PAR storage systems if
you don't want to dedicate native iSCSI ports on your array. The MPX200 also facilitates the sharing of iSCSI/FCoE connectivity
simultaneously for HP 3PAR storage systems from the same MPX200. For Data Migration the MPX200 provides high performance
migration from P6000/EVA to HP 3PAR storage systems and simplifies Data Migration from third party storage such as IBM and
EMC to HP 3PAR.The MPX200 is an ideal solution enabler for HP 3PAR customers. http://www.hp.com/go/mpx200
FCIP Software
HP MPX200 Half Chassis FCIP License
TA766A
HP MPX200 Full Chassis FCIP License
TA767A
Data Migration Software HP MPX200 1TB Full Chassis Data Migration License
TA762A
HP MPX200 5TB Full Chassis Data Migration License
TA763A
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 30
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Configuration
HP MPX200 Full Chassis 1 Array Data Migration License
TA764A
Step 11- Adding a File Controller
With HP 3PAR StoreServ File Controller you get an efficient, bulletproof, and effortless way to provide file storage from HP 3PAR
StoreServ Storage. 3PAR StoreServ File Controller saves you time and money by supporting hundreds to thousands of concurrent
users and diverse file workloads .It also has non-intrusive data deduplication that provides an average 50-60% in space savings. It
provides security through features such as built-in encryption, sophisticated access controls, online snapshots, and the ability to
run endpoint protection and backup software onboard so that data is protected at rest and in flight.
HP 3PAR StoreServ File Controllers are clustered file gateway configurations with transparent failover and online rolling
maintenance updates that deliver continuous availability of data to users, servers, and applications. With a straightforward and
consistent management experience, it also provides robust capabilities for demanding 24 x 7 file storage environments.
See the HP 3PAR StoreServ File Controller QuickSpecs for more information on specifications and options at:
http://www8.hp.com/h20195/v2/GetHtml.aspx?docname=c04637524
Add a Power Cord
The HP 3Par StoreServ File Controller comes standard with at least one rack (IEC-IEC) PDU power cord. If you wish to use wall outlet
power instead, you can choose a country- or region-specific power cord.
3Par StoreServ File
Controller
HP C13 - Nema 5-15P US/CA 110V 10Amp 1.83m Power Cord
AF556A
HP C13 - GB-1002 CN 250V 10Amp 1.83m Power Cord
AF557A
HP C13 - IRAM -2073 AR 250V 10A 2.5m Power Cord
AF558A
HP C13 - Nema 5-15P TH/PH 250V 10Amp 1.83m Power Cord
AF559A
HP C13 - KSC- 8305 KR 250V 10Amp 1.83m Power Cord
AF560A
HP C13 - CNS-690 TW 110V 13Amp 1.83m Power Cord
AF561A
HP C13 - IS-1293 IN 240V 6Amp LV 2.0m Power Cord
AF562A
HP C13 - AS3112-3 AU 250V 10Amp 2.5m Power Cord
AF569A
HP C13 - SEV 1011 CH 250V 10Amp 1.83m Power Cord
AF565A
HP C13 - DK-2.5A DK 250V 10Amp 1.83m Power Cord
AF566A
HP C13 - CEE-VII EU 250V 10Amp 1.83m Power Cord
AF568A
HP C13 - SI-32 IL 250V 10Amp 1.83m Power Cord
AF564A
HP C13 - CEI-23-50 IT/CL 250V 10Amp 1.83m Power Cord
AF571A
HP C13 - JIS C8303 JP 100V 12Amp 2.0m Power Cord
AF572A
HP C13 - BS-1363A UK/HK/SG 250V 10Amp 1.83m Power Cord
AF570A
HP C13 - SABS-164 ZA 250V 10Amp 2.5m Power Cord
AF567A
HP C13 - NBR-14136 BR 250V 10Amp 1.83m Power Cord
AF591A
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 31
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Features and Benefits
HP 3PAR StoreServ 7450 Product Dimensions, and Weight
Physical Dimensions
Height in/mm/U
Width in/mm
Depth in/mm
Max Weight lb/kg
42U Intelligent Series Rack
79.0/2006.6
23.5/597.8
44.30/1125.2
243/110 (empty)
HP 3PAR StoreServ 7450c
2-node Storage Base (no
host adapters, no drives)
3.46/87.95/2
19/483
26.6/676.1*
47.7/21.6
HP 3PAR StoreServ 7450c
2-node Storage Base (with
two host adapters, no
drives)
3.46/87.95/2
19/483
26.6/676.1*
48.7/22.1
HP 3PAR StoreServ 7450c
4-node Storage Base (no
host adapters, no drives)
6.925/175.9/4
19/483
26.6/676.1*
97.8/44.4
HP 3PAR StoreServ 7450c
4-node Storage Base (with
four host adapters, no
drives)
6.925/175.9/4
19/483
26.6/676.1*
99.8/45.3
HP M6710 2.5 inch 2U SAS
Drive Enclosures (without
drives)
3.46/87.95/2
19/483
24.8/630.7
33.5/15.2
HP M6720 3.5 inch 4U SAS
Drive Enclosures (without
drives)
6.89/175/4
19/483
24.9/631.4
42.9/19.5
SFF SAS drive with carrier
3.42/86.85**
0.78/19.9**
896/227.7
0.7/0.32
(varies by type)
LFF SAS drive with carrier
1.18/30.0**
4.36/110.84**
8.67/220.26
1.9/0.86
(varies by type)
* includes length of ejector handles
** includes RFI clips
Power Requirements
Input Voltage (VAC)
100 - 240 VAC
Frequency (Hz)
50 - 60
Component
Idle
(watts / BTU/hr)
Transactional
(watts / BTU/hr)
Node Pair (7450/7450c), no drives, no
add-on host adapters
344 / 1173
363 / 1238
4-port 8Gb/sec Fibre Channel Adapter
24 / 81.7
32.6 / 111
2-port 16Gb/s Fibre Channel Adapter
9.47 / 32.3
9.89 / 33.7
2-port 10Gb/sec iSCSI/FCoE Adapter
34 / 115.8
40 / 136.4
2-port 10Gb/s Ethernet Adapter
5.69 / 19.4
5.71 / 19.5
4-port 1Gb/s Ethernet Adapter
1.97 / 6.7
1.97 / 6.7
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 32
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Features and Benefits
HP M6710 2.5 inch 2U SAS Drive Enclosure, 150 / 512 (average)
no drives
150 / 512 (average)
HP M6720 3.5 inch 4U SAS Drive Enclosure, 164 / 559 (average)
no drives
164 / 559 (average)
480GB MLC SSD
2.2/ 7.5
5.5/18.7
920GB MLC SSD
2.2/7.5
5.5/18.7
480GB cMLC SSD
3.2/11
7.1/24.4
1920GB cMLC SSD
3.5/11.9
8.9/30.5
3840GB cMLC SSD
3.4 / 11.64
11.0 / 37.56
Environmental Specifications
Operating Temperature
41° to 104° F (5° to 40° C) - Reduce rating by 1° F for each 1000 ft altitude
(1.8° C/1,000 m)
Shipping Temperature
32° to 140° F (0° to 60° C)
Altitude (ft/m) max.
10,000 ft / 3,048 m
Shipping Altitude (ft/m) max.
40,000ft/ 12,192 m
Humidity
10% to 90% non condensing
Shipping Humidity
10% to 90% non condensing
Operating Vibration
0.25 G, Sine, 5-500 Hz, 0.1 Grms, Random 10-100Hz
Non-operating Vibration
0.5 G, 5 - 500 Hz, Sine
Operating Shock
2 G, 11ms, half-sine
Non-operating Shock
10 G, 11ms, half-sine
Maximum Air Flow
Storage Base and Upgrade Node Pair - 109 CFM per enclosure
M6710 Drive Enclosure - 105 CFM
M6720 Drive Enclosure - 109 CFM
Electromagnetic Compatibility
CISPR 22:2008/ EN55022:2010 Class A
CISPR 24:2010/ EN 55024:2010
IEC 61000-3-2:2005/ EN 61000-3-2:2006 +A1:2009 +A2:2009
IEC/ EN 61000-3-3:2008
AS/NZS CIPSR 22: 2009 Class A
CNS 13438:2006 Class A
47 CFR Part 15 Subpart b Class A
ICES-003 Issue 4 Class A
V-3/2012.04 Class A
RRA Notice No. 2011-24 (2011.12.23) Class A
RRA Notice No. 2011-25 (2011.12.23)
Acoustics
Fan Speed
Sound pressure level measured per ISO 7779
(RPM)
specifications during normal operating fan conditions,
from a minimum of 4,000 RPM to a maximum of 10,000 Typical
RPM
Maximum
7450c 2N
7450c 4N
M6710 2.5" M6720 3.5"
Storage Base Storage Base 2U SAS Drive 4U SAS Drive
Enclosure
Enclosure
72
74
66
67
93
97
85
88
Typical operations assume 20 degrees centigrade ambient with a fan
speed of 4000 RPM.
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 33
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Features and Benefits
Safety
IEC 60950-1:2005 (2nd Edition)
EN 60950-1:2006 +A11:2009
EN 62479:2010
CNS 14336-1 2nd Edition
UL 60950-1 2nd Ed.
CAN/CSA C22.2 No. 60950-1
Certifications / Markings
cTUVus Mark
TUV T-mark (EN 60950)
CE Mark
FCC Class A
IC Class A
VCCI Class A
BSMI Class A
KCC
GOST-R
C-Tick
WEEE
China RoHS
EU RoHS
NOTE: Specifications are subject to change without notice. Acoustics and power consumption for the node pair has been measured
with Gold efficiency PCM.
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 34
Quick Specs
HP 3PAR StoreServ 7450 Storage
Appendix
This Appendix includes the technical specification of the HP 3PAR StoreServ 7450 Storage.
Summary
3PAR StoreServ 7450
Number of Controller Nodes
2 or 4
HP 3PAR Gen4 ASICs
2 or 4
Processors
2 - 4 eight-core 2.3 GHz
Total On-Node Cache
128 GiB
Total On-Node Cache per controller node pair
64 GiB
Maximum Host Ports
24 ports
8Gb/s Fibre Channel Host Ports
4 - 12 ports
16Gb/s Fibre Channel Host Ports
0 - 4 ports
10Gb/s iSCSI and FCoE Host Ports
0 - 8 ports
Maximum Initiators Supported
1024 or 2048
2U Controller Enclosure SAS Drive Capacity
24
Number of Solid State Drives
Raw Capacity (approx.)
6 – 240
1
0.8 - 460.8 TiB3
2
Capacity Details
3PAR StoreServ 7450
RAID Levels
RAID 0, 1, 5, 6
RAID 5 Data to Parity Ratios
2:1 - 8:1
RAID 6 Data to Parity Ratios
4:2, 6:2, 8:2, 10:2, 14:2
Drive Capacities (approximate GB )
(RAID levels, parity ratios, and drive capacities all mixable within
the same Storage System)
100GB SSD4, 200GB SSD, 400GB SSD, 480GB SSD, 920GB SSD,
480GB cMLC SSD, 1.92TB cMLC SSD
Number of Add-on Drive Enclosures
(Each Drive Enclosure holds up to 24 drives in 2U for small form
factor drives and 4U for large form factor drives)
0 - 8 enclosures
3
NOTES:
The minimum drive quantity is permitted as long as the total raw capacity is at least 0.8 TB.
Maximum raw capacity currently supported with solid state drives.
3
For storage capacity, 1 GB = 1,000,000,000 bytes and 1 TB = 1,000 GB.
4
SSDs are Solid State Drives.
1
2
NOTE: Specifications are subject to change without notice.
HP 3PAR StoreServ 7450 Product Dimensions, and Weight
Physical Dimensions
Height in/mm/U
Width in/mm
Depth in/mm
Max Weight lb/kg
HP 3PAR StoreServ 7450 2node Storage Base (no host
adapters, no drives)
3.46/87.95/2
19/483
26.6/676.1*
47.7/21.6
HP 3PAR StoreServ 7450 2node Storage Base (with
3.46/87.95/2
19/483
26.6/676.1*
48.7/22.1
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 35
Quick Specs
HP 3PAR StoreServ 7450 Storage
Appendix
two host adapters, no
drives)
HP 3PAR StoreServ 7450 4node Storage Base (no host
adapters, no drives)
6.925/175.9/4
19/483
26.6/676.1*
97.8/44.4
HP 3PAR StoreServ 7450 4node Storage Base (with
four host adapters, no
drives)
6.925/175.9/4
19/483
26.6/676.1*
99.8/45.3
* includes length of ejector handles
** includes RFI clips
Environmental Specifications
Operating Temperature
41° to 104° F (5° to 40° C) - Reduce rating by 1° F for each 1000 ft altitude
(1.8° C/1,000 m)
Shipping Temperature
32° to 140° F (0° to 60° C)
Altitude (ft/m) max.
10,000 ft / 3,048 m
Shipping Altitude (ft/m) max.
40,000ft/ 12,192 m
Humidity
10% to 90% non-condensing
Shipping Humidity
10% to 90% non-condensing
Operating Vibration
0.25 G, Sine, 5-500 Hz, 0.1 Grms, Random 10-100Hz
Non-operating Vibration
0.5 G, 5 - 500 Hz, Sine
Operating Shock
2 G, 11ms, half-sine
Non-operating Shock
10 G, 11ms, half-sine
Maximum Air Flow
Storage Base and Upgrade Node Pair - 109 CFM per enclosure
M6710 Drive Enclosure - 105 CFM
M6720 Drive Enclosure - 109 CFM
Electromagnetic Compatibility
CISPR 22:2008/ EN55022:2010 Class A
CISPR 24:2010/ EN 55024:2010
IEC 61000-3-2:2005/ EN 61000-3-2:2006 +A1:2009 +A2:2009
IEC/ EN 61000-3-3:2008
AS/NZS CIPSR 22: 2009 Class A
CNS 13438:2006 Class A
47 CFR Part 15 Subpart b Class A
ICES-003 Issue 4 Class A
V-3/2012.04 Class A
RRA Notice No. 2011-24 (2011.12.23) Class A
RRA Notice No. 2011-25 (2011.12.23)
Acoustics
Fan Speed
Sound pressure level measured per ISO 7779
(RPM)
specifications during normal operating fan conditions,
from a minimum of 4,000 RPM to a maximum of 10,000 Typical
RPM
Maximum
7450 2N
7450 4N
M6710 2.5" M6720 3.5"
Storage Base Storage Base 2U SAS Drive 4U SAS Drive
Enclosure
Enclosure
72
74
66
67
93
97
85
88
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 36
Quick Specs
HP 3PAR StoreServ 7450 Storage
Appendix
Typical operations assume 20 degrees centigrade ambient with a fan
speed of 4000 RPM.
Safety
IEC 60950-1:2005 (2nd Edition)
EN 60950-1:2006 +A11:2009
EN 62479:2010
CNS 14336-1 2nd Edition
UL 60950-1 2nd Ed.
CAN/CSA C22.2 No. 60950-1
Certifications / Markings
cTUVus Mark
TUV T-mark (EN 60950)
CE Mark
FCC Class A
IC Class A
VCCI Class A
BSMI Class A
KCC
GOST-R
C-Tick
WEEE
China RoHS
EU RoHS
NOTE: Specifications are subject to change without notice. Acoustics and power consumption for the node pair has been measured
with Gold efficiency PCM.
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 37
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Summary of Changes
Date
02-Oct-2015
18-Sept-2015
Version History
From Version 23 to 24
From Version 22 to 23
Action
Added
Changed
17-Aug-2015
From Version 21 to 22
Changed
19-Jun-2015
05-Jun-2015
From Version 20 to 21
From Version 19 to 20
Changed
Changed
01-Jun-2015
From Version 18 to 19
Added
Changed
Deleted
30-Mar-2015
From Version 17 to 18
Changed
20-Feb-2015
From Version 16 to 17
Changed
09-Feb-2015
From Version 15 to 16
Changed
1-Dec-2014
10-Nov-2014
29-Aug-2014
22-Aug-2014
From Version 14 to 15
From Version 13 to 14
From Version 12 to 13
From Version 11 to 12
Added
Changed
Changed
Changed
18-Aug-2014
From Version 10 to 11
Changed
18-Jul-2014
From Version 9 to 10
Added
03-Jul-2014
27-Jun-2014
10-jun-2014
From Version 8 to 9
From Version 7 to 8
From Version 6 to 7
Changed
Changed
Changed
11-apr-2014
31-mar-2014
09-dec-2013
From Version 5 to 6
From Version 4 to 5
From Version 3 to 4
Changed
Changed
Added
Description of Change:
Added the HP StoreFront Remote SW
Changes made to the Service and Support and Features
and Benefits Sections.
Updated the usable file capacity for File Persona to a max
of 256TiB and built-in RCIP port support for File Persona
What´s New section was updated
Changes made to the Configuration and Overview
Sections
New lower cost 3.84TB cMLC SSDs available. New 1.92TB
FIPS Encrypted cMLC SSD available.
Changes made to the Configuration and Service and
Support Sections
Removed all the File Controller Section since it now has its
own QS.
OBS SKUs removed ( AG851B & C8569A), Entered 7450c
SW SKUs for File Persona, Updated the limited availability
message.
Changes made to the Overview and Service and Support
Sections.
Changes made to the Feature and Benefits and What´s
New Sections
Added section about HP 3PAR File Persona Software Suite
Changes were made throughout the QuickSpec.
Changes were made throughout the QuickSpec
Removed this entire bullet: “Encrypted and nonencrypted drives can be mixed in a non-encrypted array”
Changes were made throughout the Overview and
Configuration section. Sku´s descriptions were updated
Configuration section – WSS2012 R2 Upgrade section
added (D4T73A); Standard Features – Power Supply
changed from 2x 460 W to 2 x 750 W;
Changes were made throughout the QuickSpec
Changes were made throughout the QuickSpec
Overview & What´s new section; Features; Carepack
information
The QuickSpec was reconfigured.
Warranty and Hard Drives were revised.
HP 3PAR StoreServ 7450 2-node and 4-node Base for
Storage Centric Racks were added to Step 1 in
Configuration
HP 3PAR StoreServ M6710 and M6720 480GB 6G SAS SFF
and LFF MLC Solid State Drives and HP 3PAR StoreServ
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 38
QuickSpecs
HP 3PAR StoreServ 7450 Storage
Summary of Changes
28-jun-2013
From Version 2 to 3
Changed
18-jun-2013
From Version 1 to 2
Changed
M6710 and M6720 920 GB 6G SAS SFF ad LFF MLC Solid
State Drives were added to Step 4b in Configuration
Changes were made throughout the Configuration
section.
Host OS Support was revised.
© Copyright 2015 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products
and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
For drives, 1 TB = 1 trillion bytes. Actual formatted capacity is less.
c04111384 — DA – 14602 Worldwide — Version 24 — October 2, 2015
Page 39
Download PDF
Similar pages