Addressable Notification Control Module
55000-825
Addressable Notification Control Module, 4” box mounting w/LED
XP95 Series
Phone: 888- 673-2900 • Local: 309-755-6352 • Fax: 309-755-8310 • email: inquire@globalfirecontrol.com
DESCRIPTION
The XP95 series addressable sounder control module,
model 55000-825, is designed to fit one circuit of
notification appliances or switches audio to a voice
evacuation speaker circuit. An eight position dip switch
allows for setting the device address and whether the
notification appliance circuit (NAC) is wired to the
module as a Class A (Style Z) or Class B (Style Y)
circuit. This unit requires power from a separate,
regulated, power limited 24 VDC supply that is UL
Listed for Fire Protective Signaling per NFPA 72.
Each module can be addressed from 1 to 127, using
the 8 position dip switch. The dip switches are binary
numbers to make up the address. By selecting the on
position for each number and then adding them up,
gives you the device address. The dip switch numbers
are 1, 2, 4, 8, 16, 32, and 64. As an example, a
detector addressed at number 20 would have the
numbers 16 and 4 in the on position.
XP95 Series Notification Control Module
Model 55000-825
FEATURES
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Document I-05.1016 Rev. 1.1
UL listed
MEA Listed
CSFM Approved
FM Approved
Compatible with the G-Force 4200 & 4102 panels
Monitors and controls one circuit of notification
appliances
Separate, regulated, 24 VDC power
Eight position dip switch
Fast response time
4” box mounting
White cover plate w/LED window
Manufactured by Apollo Fire Detectors Ltd.
Page 1 of 2
Model No. 55000-825 Addressable Notification Control Module
ORDERING INFORMATION
Model No.
55000-825
Description
Addressable Notification Control module, 4” box mounting, w/Alarm LED
SPECIFICATIONS (55000-825 Control Module)
SPECIFICATIONS (Notification)
SLC Wiring:
2 wire supply, polarity insensitive
Relay Rating:
2A @ 30VDC, 0.6A @ 125VAC
Supply Voltage:
16-28VDC
Termination:
Screw Terminals
Class A (Style D) or Class B (Style B)
switch selectable
Current
Consumption:
Style:
Class:
1mA (.001 Amp)
End-of-Line
Resistor:
Speaker Mode:
Styles 4, 6, and 7
Terminations:
Screw Terminals
End-of-Line
resistor:
Address Setting:
Alarm Indicator:
Materials:
External Power
Supply:
Operating
Temperature:
Humidity:
None
Dip Switch
Dimensions:
Red LED visible through cover plate
White polycarbonate cover plate, V-O
rated to UL 94
24 VDC regulated, power limited, UL
Listed for Fire
Protective Signaling per NFPA
Weight:
Mounting:
47K
Jumper selectable (moving jumper
disables power supply supervision)
Note: Audio amplifier must have wire
supervision capability as per NFPA
0˚ F to + 155˚ F (-20˚ C to +70˚ C)
0% to 95% RH (No condensation or
icing)
4” x 4’ x 1.3” (113mm x 113mm x
30mm)
3 oz. (85.8g)
Centers to fit 4” box, NEMA OS-11989
Global Fire Control, Inc.
1201 7th Street, Suite 103
East Moline, IL 61244
Phone: 888-673-2900
Local: 309-755-6352
Fax: 309-755-8310
email: inquire@globalfirecontrol.com
NOTICE: The information contained in this document is intended only as a summary and is subject to change without notice. The devices
described in this document have specific instruction sheets, which cover various technical limitation and liability information. Copies of these
instruction sheets and the General Product Warning and Limitations Document, which also contains important information are provided with the
product and are available from Global Fire Control, Inc. Information contained in these documents should be consulted before specifying or using
the product. For further information or assistance concerning particular problems contact Global Fire Control, Inc. Global Fire Control, Inc.
reserves the right to change specifications without notice.
Page 2 of 2
Document I-05.1016 Rev. 1.1
Download PDF
Similar pages