QuickSpecs
HP 4800G Switch Series
Overview
Models
HP 4800-24G Switch
HP 4800-24G-PoE Switch
HP 4800-24G-SFP Switch
HP 4800-48G Switch
HP 4800-48G-PoE Switch
JD007A
JD008A
JD009A
JD010A
JD011A
Key features
High expandability for investment protection
Premium security
Intelligent Resilient Framework Stacking
Convergence-ready support
Powerful, integrated management capabilities
Product overview
TThe HP 4800G Switch Series is a Stackable Gigabit switch family that delivers outstanding security, reliability, and multi-service
support capabilities for robust switching at the edge or aggregation layer of large enterprise and campus networks, or in the core
layer of medium- and small-sized enterprise networks. The family consists of Layer 2/3/4 Gigabit Ethernet switches that can
accommodate the most demanding applications, providing resilient and secure connectivity and the latest traffic-prioritization
technologies to optimize applications on converged networks. Designed for maximum flexibility, these switches are available with 24
or 48 Gigabit ports. Power over Ethernet (PoE) and non-PoE models are offered with optional 10 Gigabit expansion capability and
small form-factor pluggable (SFP) Gigabit combo ports for fiber flexibility. The all-SFP model with dual power supplies, for highest
availability applications, allows for very flexible fiber with copper Gigabit connectivity.
Features and benefits
Quality of Service (QoS)
Layer 4 prioritization:
prioritization enables prioritization based on TCP/UDP port numbers
Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight queues
Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol,
TCP/UDP port number, source port, and DiffServ
Rate limiting:
limiting sets per-port ingress enforced maximums and per-port, per-queue guaranteed minimums
Bandwidth shaping:
shaping
Rate limiting:
limiting provides per-port, ingress-based enforced bandwidth maximums
Guaranteed minimums:
minimums provides per-port, per-queue egress-based guaranteed bandwidth minimums
Broadcast control:
control allows limitation of broadcast traffic rate to cut down on unwanted broadcast traffic on the network
Management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol provides easy mapping by network
management applications
Remote configuration and management:
management is available through a secure Web browser or a command-line interface (CLI)
Manager and operator privilege levels:
levels enable read-only (operator) and read-write (manager) access on CLI and Web
browser management interfaces
Management VLAN:
VLAN segments traffic to and from management interfaces, including CLI/telnet, a Web browser interface, and
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 1
QuickSpecs
HP 4800G Switch Series
Overview
SNMP
Uni-Directional Link Detection (UDLD): monitors cable between two switches and shuts down the ports on both ends if the
cable is broken turning the bi-directional link into uni-directional; this prevents network problems such as loops (may not apply
to all models; see specifications for more details)
Multiple configuration files:
files can be stored to the flash image
Dual flash images:
images provide independent primary and secondary operating system files for backup while upgrading
Secure Web GUI:
GUI provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
Command-line interface (CLI): provides a secure, easy-to-use command-line interface for configuring the module via SSH or
a switch console; provides direct real-time session visibility
SNMPv1, v2c, and v3:
v3 facilitate centralized discovery, monitoring, and secure management of networking devices
Port mirroring:
mirroring enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
sFlow (RFC 3176): provides scalable, ASIC-based wire-speed network monitoring and accounting with no impact on network
performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity
planning and real-time network monitoring purposes
Enterprise network management:
management is supported by the Web-based, enterprise-class HP Intelligent Management Center (IMC)
network management platform and Wireless Service Management (WSM), which effectively integrate traditionally disparate
management tools into one easy-to-use interface
RADIUS accounting:
accounting logs all session details that can be used to generate usage reports or interface to a billing system
DHCP options:
options DHCP client and snooping
Connectivity
Auto-MDIX:
Auto-MDIX automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
Dual-personality functionality:
functionality includes four 10/100/1000 ports or SFP slots for optional fiber connectivity such as GigabitSX, -LX, -LH, or 100-FX
IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices
such as IP phones, wireless access points, and security cameras
Optional 10 Gigabit Ethernet ports:
ports allow the addition of 10 Gigabit Ethernet connections for uplinks or high-bandwidth
server connections; flexibly supports XFP, SFP+, or CX4 local connections
High-bandwidth CX4 local stacking:
stacking when locally stacked using CX4 local stacking, achieves 12 Gbps per connection,
allowing for up to 96 Gbps total stacking bandwidth (full duplex) in a resilient stacking configuration
IPv6 native support:
support
IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge
Dual stack (IPv4 and IPv6): transitions from IPv4 to IPv6, supporting connectivity for both protocols
Multicast Listener Discovery (MLD) snooping: forwards IPv6 multicast traffic to the appropriate interface
IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic, preventing traffic flooding
IPv6 routing: supports IPv6 static routes and IPv6 versions of RIP and OSPF routing protocols
High-density port connectivity:
connectivity provides up to 48 fixed 10/100/1000BASE-T or 24 SFP 1000BASE-X ports in a Layer 2/Layer
3/Layer 4 stackable switch supporting unique IRF stacking
Resiliency and high availability
IEEE 802.1D Spanning Tree Protocol (STP): provides redundant links while preventing network loops
IEEE 802.1s Multiple Spanning Tree:
Tree provides high link availability in multiple VLAN environments by allowing multiple
spanning trees
Virtual Router Redundancy Protocol (VRRP): allows groups of two routers to dynamically back each other up to create highly
available routed environments
Device Link Detection Protocol (DLDP): monitors link connectivity and shuts down ports at both ends if unidirectional traffic is
detected, preventing loops in STP-based networks
Intelligent Resilient Framework (IRF): creates virtual resilient switching fabrics, where two or more switches perform as a single
Layer 2 switch, Layer 3 router; switches do not have to be co-located and can be part of a disaster recovery system; servers or
switches can be attached using standard LACP for automatic load-balancing and high availability; simplifies network
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 2
QuickSpecs
HP 4800G Switch Series
Overview
operation by eliminating the complexity of Spanning Tree, Equal-Cost Multipath (ECMP), or VRRP
Rapid Ring Protection Protocol (RRPP): connects multiple switches in a high-performance ring using standard Ethernet
technology; traffic can be rerouted around the ring in less than 50 ms, reducing the impact on traffic and applications
Manageability
Advanced IRF technology stacking:
stacking
Locally connect up to nine E4800G switches using 10 Gigabit or CX4 local connections
Improve resiliency by spreading aggregated links across multiple stacked units
See faster performance through a distributed routing architecture where locally bound traffic is handled at each unit
Simplify management with single IP management and a unified control interface per stack
RMON (remote monitoring): provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Dual flash images:
images provides independent primary and secondary operating system files for backup while upgrading
Full-featured console:
console provides complete control of the switch with a familiar command-line interface (CLI)
Web interface:
interface allows configuration of the switch from any Web browser on the network
Multiple configuration files:
files allow multiple configuration files to be stored to flash image
Software updates:
updates free downloads from the Web
sFlow (RFC 3176): wire-speed traffic accounting and monitoring
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol provides easy mapping using
network management applications
Virtual stacking capability:
capability single IP address management for a virtual stack of up to 255 Comware-based 3Com legacy
devices, including HP E4XXX and E55XX series switches
Troubleshooting:
Troubleshooting
Ingress and egress port monitoring enable network problem solving
Tracert and Ping enable testing of network connectivity
Virtual Cable Tests provide visibility to cable problems
Layer 2 switching
VLAN support and tagging:
tagging support IEEE 802.1Q, with 4094 simultaneous VLAN IDs
GARP VLAN Registration Protocol (GVRP): allows automatic learning and dynamic assignment of VLANs
IP multicast snooping and data-driven IGMP:
IGMP automatically prevents flooding of IP multicast traffic
Jumbo packet support:
support supports up to 9220-byte frame size to improve performance of large data transfers
IEEE 802.1ad QinQ:
QinQ increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple
LANs on a high-speed campus or metro network
Layer 3 services
Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs;
gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when
subnets are separated by a Layer 2 network
User Datagram Protocol (UDP) helper:
helper redirects UDP broadcasts to specific IP subnets to prevent server spoofing
Dynamic Host Configuration Protocol (DHCP): simplifies the management of large IP networks and supports client and
server; DHCP Relay enables DHCP operation across subnets
Layer 3 routing
IPv4 Routing Protocols:
Protocols support static routes, RIP, ISIS, OSPF, BGP-4
IPv6 Routing Protocols:
Protocols provide routing of IPv6 at wire speed support static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+
OSPF-ECMP (Equal-Cost Multipath): enables multiple equal-cost links in OSPF environment to increase link redundancy and
scale bandwidth
OSPF:
OSPF provides OSPFv2 for IPv4 and OSPFv3 for IPv6 routing
Multicast Routing PIM Dense and Sparse modes:
modes provides robust support of multicast protocols
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 3
QuickSpecs
HP 4800G Switch Series
Overview
Border Gateway Protocol 4 (BGP-4): Exterior Gateway Protocol (EGP) with path vector protocol uses TCP for enhanced
reliability for the route discovery process, reduces bandwidth consumption by advertising only incremental updates, and
supports extensive policies for increased flexibility, as well as scales to very large networks
IGMPv1, v2, and v3:
v3 allow individual hosts to be registered on a particular VLAN
PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6): support IP Multicast address management and inhibition of DoS attacks
IPv6 tunneling:
tunneling allows a smooth transition from IPv4 to IPv6 by encapsulating IPv6 traffic over an existing IPv4 infrastructure
Security
Access control lists (ACLs): provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination
TCP/UDP port number
RADIUS/TACACS+:
RADIUS/TACACS+ eases switch management security administration by using a password authentication server
Secure Shell (SSHv2): encrypts all transmitted data for secure, remote command-line interface (CLI) access over IP networks
IEEE 802.1X and RADIUS network logins:
logins control port-based access for authentication and accountability
Port security:
security allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout:
lockout prevents particular configured MAC addresses from connecting to the network
Secure File Transfer Protocol (FTP): allows secure file transfer to and from the switch; protects against unwanted file
downloads or unauthorized copying of a switch configuration file
Switch management logon security:
security can require either RADIUS or TACACS+ authentication for secure switch CLI logon
Secure management access:
access securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
Custom banner:
banner displays security policy when users log in to the switch
Automatic VLAN assignment:
assignment automatically assigns users to the appropriate VLAN based on their identity and location and
the time of day
Management password:
password provides security so that only authorized access to the Web browser interface is allowed
IP lockdown:
lockdown restricts incoming traffic on a port to a specific IP address/subnet, and denies all other traffic on that port
STP BPDU port protection:
protection blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged
BPDU attacks
Dynamic IP lockdown:
lockdown works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address
spoofing
DHCP protection:
protection blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Dynamic ARP protection:
protection blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
STP Root Guard:
Guard protects the root bridge from malicious attack or configuration mistakes
Convergence
LLDP-MED (Media Endpoint Discovery): is a standard extension of LLDP that stores values for parameters such as QoS and
VLAN to automatically configure network devices such as IP phones
IP multicast routing (PIM Dense): routes IP multicast traffic using the PIM Dense routing protocol
Automated voice VLAN assignment:
assignment recognizes IP phones and automatically assigns voice traffic to a dedicated VLAN for IP
phones
Monitor and diagnostics
Port mirroring:
mirroring enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
Software updates:
updates free downloads from the Web
Warranty and support
Lifetime warranty:
warranty for as long as you own the product with advance replacement and next-business-day delivery (available in
most countries)*
Electronic and telephone support:
support limited electronic and telephone support is available from HP; refer to:
www.hp.com/networking/warranty for details on the support provided and the period during which support is available
Software releases:
releases refer to: www.hp.com/networking/warranty for details on the software releases provided and the period
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 4
QuickSpecs
HP 4800G Switch Series
Overview
during which software releases are available for your product(s)
* Hardware warranty replacement for as long as you own the product, with next business day advance replacement (available in
most countries) with a five-year hardware warranty replacement for the disk drive included with HP AllianceONE Services zl Module,
HP Threat Management Services zl Module, HP PCM+ Agent with AllianceONE Services zl Module, and HP E-MSM765 zl Mobility
Controller. For details, refer to the HP Software License, Warranty, and Support booklet at: www.hp.com/networking/warranty.
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 5
QuickSpecs
HP 4800G Switch Series
Technical Specifications
HP 4800-24G Switch (JD007A)
2 module slots
Ports
20 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); 10/100/1000
Supports a maximum of 4 10-GbE ports
11.8(d) x 17.4(w) x 1.7(h) in. (29.97 x 44.2 x 4.32 cm) (1U height)
Physical characteristics
Dimensions
8.8 lb. (3.99 kg)
Weight
MPC8349 @ 533 MHz, 256 MB RAM, 32 MB flash; packet buffer size: 2
Memory and processor
Module
MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Mounting
< 10 µs
Performance
100 Mb Latency
107.2 million pps
Throughput
144 Gbps
Routing/Switching
capacity
12,000 entries
Routing table size
32°F to 113°F (0°C to 45°C)
Environment
Operating temperature
10% to 90%, non-condensing
Operating relative
humidity
100-240 VAC
Electrical characteristics Voltage
Achieved Miercom
Frequency
50 / 60 Hz
Certified Green Award
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Safety
FCC part 15 Class A; VCCI Class A; CISPR 22 Class A; EN 55024; EN 55022 1998 Class A; EN
Emissions
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; command-line interface; Web browser; out-of-band management
Management
(serial RS-232C); SNMP Manager; Telnet; HTTPS; IEEE 802.3 Ethernet MIB
Supports a maximum of four 10-GbE ports
Notes
3-year, 4-hour onsite, 13x5 coverage for hardware (UV906E)
Services
3-year, 4-hour onsite, 24x7 coverage for hardware (UV909E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV912E)
3-year, 24x7 SW phone support, software updates (UV915E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV907E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV910E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV913E)
4-year, 24x7 SW phone support, software updates (UV916E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV908E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV911E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV914E)
5-year, 24x7 SW phone support, software updates (UV917E)
3 Yr 6 hr Call-to-Repair Onsite (UW975E)
4 Yr 6 hr Call-to-Repair Onsite (UW976E)
5 Yr 6 hr Call-to-Repair Onsite (UW977E)
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 6
QuickSpecs
HP 4800G Switch Series
Technical Specifications
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
HP 4800-24G-PoE Switch (JD008A)
2 module slots
Ports
20 auto-negotiating 10/100/1000 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE)
4 dual-personality 10/100/1000 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE)
Supports a maximum of 4 10-GbE ports
16.5(d) x 17.4(w) x 1.7(h) in. (41.91 x 44.2 x 4.32 cm) (13.2U height)
Physical characteristics
Dimensions
13.23 lb. (6 kg)
Weight
MPC8349 @ 533 MHz, 256 MB RAM, 32 MB flash; packet buffer size: 2
Memory and processor
Module
MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Mounting
< 10 µs
Performance
100 Mb Latency
107.2 million pps
Throughput
144 Gbps
Routing/Switching
capacity
12,000 entries
Routing table size
32°F to 113°F (0°C to 45°C)
Environment
Operating temperature
10% to 90%, non-condensing
Operating relative
humidity
100-240 VAC
Electrical characteristics Voltage
50 / 60 Hz
Frequency
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Safety
FCC part 15 Class A; VCCI Class A; CISPR 22 Class A; EN 55024; EN 55022 1998 Class A; EN
Emissions
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; command-line interface; Web browser; out-of-band management
Management
(serial RS-232C); SNMP Manager; Telnet; HTTPS; IEEE 802.3 Ethernet MIB
Supports a maximum of four 10-GbE ports
Notes
3-year, 4-hour onsite, 13x5 coverage for hardware (UV906E)
Services
3-year, 4-hour onsite, 24x7 coverage for hardware (UV909E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV912E)
3-year, 24x7 SW phone support, software updates (UV915E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV907E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV910E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV913E)
4-year, 24x7 SW phone support, software updates (UV916E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV908E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV911E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV914E)
5-year, 24x7 SW phone support, software updates (UV917E)
3 Yr 6 hr Call-to-Repair Onsite (UW975E)
4 Yr 6 hr Call-to-Repair Onsite (UW976E)
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 7
QuickSpecs
HP 4800G Switch Series
Technical Specifications
5 Yr 6 hr Call-to-Repair Onsite (UW977E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
HP 4800-24G-SFP Switch (JD009A)
2 module slots
Ports
10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
Supports a maximum of 4 10-GbE ports
2 power-supply slots
Power supplies
1 minimum power-supplies required
includes: 1 x JD362AHP A5500 150 W AC Power Supply
14.17(d) x 17.32(w) x 1.72(h) in. (36.00 x 44 x 4.36 cm) (1U height)
Physical characteristics
Dimensions
13.89 lb. (6.3 kg)
Weight
MPC8349 @ 533 MHz, 256 MB RAM, 32 MB flash; packet buffer size: 2
Memory and processor
Module
MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Mounting
< 10 µs
Performance
100 Mb Latency
107.2 million pps
Throughput
144 Gbps
Routing/Switching
capacity
12,000 entries
Routing table size
32°F to 113°F (0°C to 45°C)
Environment
Operating temperature
10% to 90%, non-condensing
Operating relative
humidity
100-240 VAC
Electrical characteristics Voltage
50 / 60 Hz
Frequency
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Safety
FCC part 15 Class A; VCCI Class A; CISPR 22 Class A; EN 55024; EN 55022 1998 Class A; EN
Emissions
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; command-line interface; Web browser; out-of-band management
Management
(serial RS-232C); SNMP Manager; Telnet; HTTPS; IEEE 802.3 Ethernet MIB
Supports a maximum of four 10-GbE ports
Notes
3-year, 4-hour onsite, 13x5 coverage for hardware (UV906E)
Services
3-year, 4-hour onsite, 24x7 coverage for hardware (UV909E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV912E)
3-year, 24x7 SW phone support, software updates (UV915E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV907E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV910E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV913E)
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 8
QuickSpecs
HP 4800G Switch Series
Technical Specifications
4-year, 24x7 SW phone support, software updates (UV916E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV908E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV911E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV914E)
5-year, 24x7 SW phone support, software updates (UV917E)
3 Yr 6 hr Call-to-Repair Onsite (UW975E)
4 Yr 6 hr Call-to-Repair Onsite (UW976E)
5 Yr 6 hr Call-to-Repair Onsite (UW977E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
HP 4800-48G Switch (JD010A)
2 module slots
Ports
44 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
4 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
Supports a maximum of 4 10-GbE ports
11.8(d) x 17.4(w) x 1.7(h) in. (29.97 x 44.2 x 4.32 cm) (1U height)
Physical characteristics
Dimensions
9.9 lb. (4.49 kg)
Weight
MPC8349 @ 533 MHz, 256 MB RAM, 32 MB flash; packet buffer size: 4
Memory and processor
Module
MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Mounting
< 10 µs
Performance
100 Mb Latency
142.9 million pps
Throughput
192 Gbps
Routing/Switching
capacity
12,000 entries
Routing table size
32°F to 113°F (0°C to 45°C)
Environment
Operating temperature
10% to 90%, non-condensing
Operating relative
humidity
100-240 VAC
Electrical characteristics Voltage
Achieved Miercom
Frequency
50 / 60 Hz
Certified Green Award
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Safety
FCC part 15 Class A; VCCI Class A; CISPR 22 Class A; EN 55024; EN 55022 1998 Class A; EN
Emissions
61000-3-2 2000, 61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; command-line interface; Web browser; out-of-band management
Management
(serial RS-232C); SNMP Manager; Telnet; HTTPS; IEEE 802.3 Ethernet MIB
Supports a maximum of four 10-GbE ports
Notes
3-year, 4-hour onsite, 13x5 coverage for hardware (UV906E)
Services
3-year, 4-hour onsite, 24x7 coverage for hardware (UV909E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV912E)
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 9
QuickSpecs
HP 4800G Switch Series
Technical Specifications
3-year, 24x7 SW phone support, software updates (UV915E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV907E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV910E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV913E)
4-year, 24x7 SW phone support, software updates (UV916E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV908E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV911E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV914E)
5-year, 24x7 SW phone support, software updates (UV917E)
3 Yr 6 hr Call-to-Repair Onsite (UW975E)
4 Yr 6 hr Call-to-Repair Onsite (UW976E)
5 Yr 6 hr Call-to-Repair Onsite (UW977E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
HP 4800-48G-PoE Switch (JD011A)
2 module slots
Ports
44 auto-negotiating 10/100/1000 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE)
4 dual-personality 10/100/1000 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE)
Supports a maximum of 4 10-GbE ports
16.5(d) x 17.4(w) x 1.7(h) in. (41.91 x 44.2 x 4.32 cm) (1U height)
Physical characteristics
Dimensions
14.3 lb. (6.49 kg)
Weight
MPC8349 @ 533 MHz, 256 MB RAM, 32 MB flash; packet buffer size: 4
Memory and processor
Module
MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Mounting
< 10 µs
Performance
100 Mb Latency
142.9 million pps
Throughput
192 Gbps
Routing/Switching
capacity
12,000 entries
Routing table size
32°F to 113°F (0°C to 45°C)
Environment
Operating temperature
10% to 90%, non-condensing
Operating relative
humidity
Electrical characteristics Maximum heat dissipation 100 / 240 BTU/hr (105.5 / 253.2 kJ/hr)
100-240 VAC
Voltage
50 / 60 Hz
Frequency
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Safety
FCC part 15 Class A; VCCI Class A; CISPR 22 Class A; EN 55024; EN 55022 1998 Class A; EN
Emissions
61000-3-2 2000, 61000-3-3; ICES-003 Class A
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 10
QuickSpecs
HP 4800G Switch Series
Technical Specifications
Management
Notes
Services
IMC - Intelligent Management Center; command-line interface; Web browser; out-of-band management
(serial RS-232C); SNMP Manager; Telnet; HTTPS; IEEE 802.3 Ethernet MIB
Supports a maximum of four 10-GbE ports
3-year, 4-hour onsite, 13x5 coverage for hardware (UV906E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV909E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV912E)
3-year, 24x7 SW phone support, software updates (UV915E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV907E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV910E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV913E)
4-year, 24x7 SW phone support, software updates (UV916E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV908E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV911E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV914E)
5-year, 24x7 SW phone support, software updates (UV917E)
3 Yr 6 hr Call-to-Repair Onsite (UW975E)
4 Yr 6 hr Call-to-Repair Onsite (UW976E)
5 Yr 6 hr Call-to-Repair Onsite (UW977E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
Standards and protocols
(applies to all products in
series)
BGP
RFC 1657 Definitions of Managed Objects for
BGPv4
RFC 1771 BGPv4
RFC 2858 BGP-4 Multi-Protocol Extensions
Device management
RFC 1157 SNMPv1/v2c
RFC 2452 MIB for TCP6
RFC 2454 MIB for UDP6
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q (GVRP)
IEEE 802.1Q VLANs
IEEE 802.1s (MSTP)
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and
Port
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.1X PAE
IEEE 802.3ab 1000BASE-T
IEEE 802.3ac (VLAN Tagging Extension)
IEEE 802.3ad Link Aggregation (LAG)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3af Power over Ethernet
DA - 13798
RFC 2464 Transmission of IPv6 over Ethernet
Networks
RFC 2475 IPv6 DiffServ Architecture
RFC 2526 Reserved IPv6 Subnet Anycast Addresses
RFC 2710 Multicast Listener Discovery (MLD) for
IPv6
RFC 2740 OSPFv3 for IPv6
RFC 3056 Connection of IPv6 Domains via IPv4
Clouds
RFC 3306 Unicast-Prefix-based IPv6 Multicast
Addresses
RFC 3307 IPv6 Multicast Address Allocation
RFC 3484 Default Address Selection for IPv6
RFC 3493 Basic Socket Interface Extensions for
IPv6
RFC 3513 IPv6 Addressing Architecture
RFC 3542 Advanced Sockets API for IPv6
RFC 3587 IPv6 Global Unicast Address Format
RFC 3596 DNS Extension for IPv6
RFC 3810 MLDv2 for IPv6
RFC 4443 ICMPv6
MIBs
IEEE8021-PAE-MIB
IEEE8023-LAG-MIB
RFC 1212 Concise MIB Definitions
RFC 1213 MIB II
RFC 1493 Bridge MIB
EMEA — Version 6 — October 19, 2011
Page 11
QuickSpecs
HP 4800G Switch Series
Technical Specifications
IEEE 802.3ag Ethernet OAM
IEEE 802.3ah Ethernet in First Mile over Point to
Point Fiber - EFMF
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-X
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 856 TELNET
RFC 925 Multi-LAN Address Resolution
RFC 950 Internet Standard Subnetting Procedure
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1122 Host Requirements
RFC 1141 Incremental updating of the Internet
checksum
RFC 1253 (OSPF v2)
RFC 1305 NTPv3
RFC 1350 TFTP Protocol (revision 2)
RFC 1389 RIPv2 MIB Extension
RFC 1519 CIDR
RFC 1542 BOOTP Extensions
RFC 1723 RIP v2
RFC 1812 IPv4 Routing
RFC 2131 DHCP
RFC 2236 IGMP Snooping
RFC 2284 EAP over LAN
RFC 2616 HTTP Compatibility v1.1
RFC 2644 Directed Broadcast Control
RFC 2767 Dual Stacks IPv4 & IPv6
RFC 3246 Expedited Forwarding PHB
RFC 3410 Applicability Statements for SNMP
RFC 3416 Protocol Operations for SNMP
RFC 3417 Transport Mappings for the Simple
Network Management Protocol (SNMP)
RFC 3623 Graceful OSPF Restart
RFC 3704 Unicast Reverse Path Forwarding (URPF)
RFC 3768 VRRP
RFC 4213 Basic IPv6 Transition Mechanisms
IPv6
RFC 1886 DNS Extension for IPv6
RFC 1887 IPv6 Unicast Address Allocation
Architecture
RFC 1981 IPv6 Path MTU Discovery
RFC 2080 RIPng for IPv6
RFC 2373 IPv6 Addressing Architecture
DA - 13798
RFC 1657 BGP-4 MIB
RFC 1724 RIPv2 MIB
RFC 1907 SNMPv2 MIB
RFC 2012 SNMPv2 MIB for TCP
RFC 2233 Interfaces MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2574 SNMP USM MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2819 RMON MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 4113 UDP MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1D (STP)
RFC 1157 SNMPv1
RFC 1215 SNMP Generic traps
RFC 1757 RMON 4 groups: Stats, History, Alarms
and Events
RFC 1901 SNMPv2 Introduction
RFC 1918 Private Internet Address Allocation
RFC 2575 VACM for SNMP
RFC 2576 Coexistence between SNMP versions
RFC 2578 SMIv2
RFC 2581 TCP6
OSPF
RFC 1253 OSPFv2 MIB
RFC 1587 OSPF NSSA
RFC 1850 OSPFv2 Management Information Base
(MIB), traps
RFC 2328 OSPFv2
QoS/CoS
IEEE 802.1P (CoS)
RFC 2474 DSCP DiffServ
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
Security
RFC 1492 TACACS+
IPsec
RFC 2401 IP Security Architecture
EMEA — Version 6 — October 19, 2011
Page 12
QuickSpecs
HP 4800G Switch Series
Technical Specifications
RFC 2375 IPv6 Multicast Address Assignments
RFC 2460 IPv6 Specification
RFC 2461 IPv6 Neighbor Discovery
RFC 2462 IPv6 Stateless Address Autoconfiguration
RFC 2463 ICMPv6
DA - 13798
RFC 2402 IP Authentication Header
RFC 2406 IP Encapsulating Security Payload
RFC 2409 - The Internet Key Exchange
RFC 2865 - Remote Authentication Dial In User
Service (RADIUS)
EMEA — Version 6 — October 19, 2011
Page 13
QuickSpecs
HP 4800G Switch Series
Accessories
HP 4800G Switch Series Modules
accessories
HP 5500/4800 2-port GbE SFP Module
HP 5500/5120 2-port 10GbE SFP+ Module
HP 4500/4800 2-port 10GbE XFP Module
HP 4500/4800 1-port 10GbE XFP Module
HP 4500/4800 2-port 10GbE LCM Module
HP 5500 2-port 10GbE Local Connect Module
Transceivers
HP X130 SFP+ LC SR Transceiver
HP X130 SFP+ LC LRM Transceiver
HP X130 SFP+ LC LR Transceiver
HP X124 1G SFP LC SX Transceiver
HP X124 1G SFP LC LX Transceiver
HP X125 1G SFP RJ45 T Transceiver
HP X124 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X125 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X110 100M SFP LC FX Dual Mode Transceiver
HP X110 100M SFP LC LX10 Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X110 100M SFP LC FX Transceiver
HP X130 SC LR XFP Transceiver
HP X130 LC SR XFP Transceiver
HP X135 LC ER XFP Transceiver
HP X130 CX4 XFP Transceiver
Cables
HP 0.5 m Multimode OM3 LC/LC Optical Cable
HP 1 m Multimode OM3 LC/LC Optical Cable
HP 2 m Multimode OM3 LC/LC Optical Cable
HP 5 m Multimode OM3 LC/LC Optical Cable
HP 15 m Multimode OM3 LC/LC Optical Cable
HP 30 m Multimode OM3 LC/LC Optical Cable
HP 50 m Multimode OM3 LC/LC Optical Cable
HP 50 cm CX4 Cable
HP 100 cm CX4 Cable
HP 300 cm CX4 Cable
NEW HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 1 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 2 m PremierFlex OM3+ LC/LC Optical Cable
DA - 13798
EMEA — Version 6 — October 19, 2011
JD367A
JD368B
JE049A
JE053A
JE051A
JD360B
JD092B
JD093B
JD094B
JD493A
JD494A
JD089B
JD061A
JD062A
JD063B
JD098B
JD099B
JD118B
JD119B
JD120B
JD497A
JD498A
JD090A
JD091A
JD102B
JD108B
JD117B
JD121A
JD506A
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
JE054A
JE055A
JE056A
BK837A
BK838A
BK839A
Page 14
QuickSpecs
HP 4800G Switch Series
Accessories
NEW HP 5 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 15 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 30 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 50 m PremierFlex OM3+ LC/LC Optical Cable
Power Supply
HP A5800/A5500 150W AC Power
HP A5800/A5500 150W DC Power Supply
DA - 13798
EMEA — Version 6 — October 19, 2011
BK840A
BK841A
BK842A
BK843A
JD362A
JD366A
Page 15
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP 2-Port SFP
A5500/E4800 Module
(JD367A)
Ports
Services
2 SFP 1000 Mbps ports
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 4500/4800 2-port
10GbE XFP Module
(JE049A)
Ports
Services
2 XFP 10-GbE ports; Duplex: full only
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 4500/4800 1-port
10GbE XFP Module
(JE053A)
Ports
Services
1 XFP 10-GbE port; Duplex: full only
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 4500/4800 2-port
10GbE LCM Module
(JE051A)
Ports
Services
2 CX4 10-GbE ports; Duplex: full only
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP X124 1G SFP LC SX
Transceiver (JD493A)
Ports
Connectivity
1 LC 1000BASE-SX port
Connector type
Wavelength
Dimensions
JD493A HP X124 1G SFP
Physical characteristics
LC SX Transceiver that
provides a full duplex
Gigabit solution up to
550m on Multi Mode
Electrical characteristics
fiber.
Cabling
Services
DA - 13798
LC
850 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
0.8 W
typical
1.0 W
Power consumption
maximum
Maximum distance:
• 220m-550m
Fiber type
Multi Mode
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
EMEA — Version 6 — October 19, 2011
Page 16
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP X124 1G SFP LC LX
Transceiver (JD494A)
Ports
Connectivity
A small form-factor
pluggable (SFP) Gigabig Physical characteristics
LX transceiver that provides
a full duplex Gigabit
solution up to 550m on
MMF or 10Km on SMF
Electrical characteristics
Cabling
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
LC
Connector type
1300 nm
Wavelength
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
Dimensions
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
SFP
Transceiver form factor
0.8 W
Power consumption
typical
1.0 W
Power consumption
maximum
Maximum distance:
• 500m for Multimode
• 10km for Singlemode
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Services
HP X125 1G SFP RJ45 T Ports
Transceiver (JD089B)
Connectivity
Physical characteristics
A small form factor
pluggable (SFP) Gigabit
1000Base-T transceiver
that provides a full duplex Electrical characteristics
Gigabit solution up to
100m on a Cat-5+ cable.
Cabling
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
RJ-45
Connector type
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x
Dimensions
1.4 cm)
Full configuration weight 0.07 lb. (0.03 kg)
0.8 W
Power consumption
typical
1.0 W
Power consumption
maximum
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
• 100m
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Services
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 17
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP X124 1G SFP LC LH40 Ports
1310nm Transceiver
Connectivity
(JD061A)
A small form-factor
pluggable SFP Gigabit
LH40 transceiver that
provides a full duplex
Gigabit solution up to
40km on a single-mode
fiber.
Physical characteristics
Electrical characteristics
Cabling
1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1310 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption typical 0.8 W
Power consumption
1.0 W
maximum
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
40km distance
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
HP X120 1G SFP LC LH40 Ports
1550nm Transceiver
Connectivity
(JD062A)
Physical characteristics
A small form-factor
pluggable (SFP) Gigabit
LH40 transceiver that
Electrical characteristics
provides a full-duplex
Gigabit solution up to 40
km on a single mode fiber.
Cabling
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1550 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption typical 0.8 W
Power consumption
1.0 W
maximum
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
40km distance
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 18
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP X125 1G SFP LC
LH70 Transceiver
(JD063B)
Ports
Connectivity
A small form-factor
pluggable (SFP) Gigabit
LH70 transceiver that
provides a full-duplex
Gigabit solution up to
70km on a single-mode
fiber.
Physical characteristics
Electrical characteristics
Cabling
Maximum distance:
• 70km
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Services
HP X120 1G SFP LC BX
10-U Transceiver
(JD098B)
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
LC
Connector type
1550 nm
Wavelength
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
Dimensions
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
0.8 W
Power consumption
typical
1.0 W
Power consumption
maximum
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Ports
Connectivity
Physical characteristics
A small form-factor
pluggable (SFP) Gigabit
LX-BX10-U transceiver that
provides a full duplex
Electrical characteristics
Gigabit solution up to
10km on a single mode
cable.
Cabling
Notes
Services
DA - 13798
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U);
Duplex: full only
LC
Connector type
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
Dimensions
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
0.8 W
Power consumption
typical
1.0 W
Power consumption
maximum
Maximum distance:
• 10km
Fiber type
Single Mode
TX 1310nm RX 1490nm
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
EMEA — Version 6 — October 19, 2011
Page 19
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP X120 1G SFP LC BX
10-D Transceiver
(JD099B)
Ports
Connectivity
Physical characteristics
A small form-factor
pluggable (SFP) Gigabit
LX-BX10-D transceiver that
provides a full duplex
Electrical characteristics
Gigabit solution up to
10km on a single mode
cable.
Cabling
Notes
Services
HP X120 1G SFP LC SX
Transceiver (JD118B)
Ports
Connectivity
A small form-factor
pluggable (SFP) Gigabit SX Physical characteristics
transceiver that provides a
full-duplex Gigabit
solution up to 550m on a Electrical characteristics
Multimode fiber.
Cabling
Services
DA - 13798
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D);
Duplex: full only
LC
Connector type
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
Dimensions
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
0.8 W
Power consumption
typical
1.0 W
Power consumption
maximum
Maximum distance:
• Up to 10km
Fiber type
Single Mode
TX 1490nm RX 1310nm
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
1 LC 1000BASE-SX port
Connector type
Wavelength
Dimensions
LC
850 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
0.8 W
typical
1.0 W
Power consumption
maximum
Maximum distance:
• FDDI Grade distance = 220m
• OM1 = 275m
• OM2 = 500m
• OM3 = Not Specified by standard
Cable length
up to 550m
Fiber type
Multi Mode
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
EMEA — Version 6 — October 19, 2011
Page 20
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP X120 1G SFP LC LX
Transceiver (JD119B)
Ports
Connectivity
A small form-factor
pluggable (SFP) Gigabig Physical characteristics
LX transceiver that provides
a full duplex Gigabit
solution up to 550m on
Electrical characteristics
MMF or 10Km on SMF
Cabling
Maximum distance:
• 550m for Multimode
• 10km for Singlemode
Fiber type
Both
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Services
HP X110 100M SFP LC
FX Dual Mode
Transceiver(JD497A)
Transceiver
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
LC
Connector type
1300 nm
Wavelength
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
Dimensions
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
0.8 W
Power consumption
typical
1.0 W
Power consumption
maximum
Cable type:
Either single mode or multimode;
Ports
Connectivity
Physical characteristics
A small form-factor
pluggable (SFP) 100 MB/s
Dual mode transceiver that
provides a full duplex
Electrical characteristics
100Mb/s solution up to
2km on a multi mode
fiber.
Cabling
Services
DA - 13798
1 LC 100 Mbps port
Connector type
Wavelength
Dimensions
LC
1310 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
0.8 W
typical
1.0 W
Power consumption
maximum
2km
Cable length
Multi Mode
Fiber type
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
EMEA — Version 6 — October 19, 2011
Page 21
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP X110 100M SFP LC Ports
LX10 Transceiver(JD498A)
Transceiver
Connectivity
A small form-factor
pluggable (SFP) 100Mb/s Physical characteristics
transceiver that provides a
full duplex 100Mb/s
solution for up to 10km on Electrical characteristics
a single mode cable.
Cabling
An XFP 10 Gigabit CX4
transceiver that provides
full duplex 10G solution
using CX4 cabling.
HP 0.5 m Multimode
OM3 LC/LC Optical
Cable (AJ833A)
LC
1310 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
0.8 W
typical
1.0 W
Power consumption
maximum
10km
Cable length
Fiber type
Single Mode
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Services
HP X130 10G XFP CX4
Transceiver (JD506A)
1 LC 100 Mbps port
Connector type
Wavelength
Dimensions
Ports
Connectivity
Cabling
Services
1 CX4 10-GbE port; Duplex: full only
CX4
Connector type
15m Max CX4 cables
Cable length
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Cabling
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 22
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
HP 1 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ834A)
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 23
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP 2 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ835A)
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 24
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP 5 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ836A)
Cable type:
type
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable
and Ethernet assembly with LC duplex connectors on one end and LC duplex
connectors on other end.
Notes
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 25
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP 15 m Multimode
OM3 LC/LC Optical
Cable (AJ837A)
Cabling
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 26
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP 30 m Multimode
OM3 LC/LC Optical
Cable (AJ838A)
Cabling
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 27
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP 50 m Multimode
OM3 LC/LC Optical
Cable (AJ839A)
Cabling
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 28
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP 0.5 m PremierFlex
OM3+ LC/LC Optical
Cable (BK837A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ± 3um; Cladding diameter: 125um ± 2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade - Low Smoke Zero Halogen (LSZH)
thermoplastic.
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL OFN FT4, ROHS. Cable also has a longitudal
white stripe that runs the entire length of the cable.
• Insertion Loss: less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
HP 1 m PremierFlex
OM3+ LC/LC Optical
Cable (BK838A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 29
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP 2 m PremierFlex
OM3+ LC/LC Optical
Cable (BK839A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
HP 5 m PremierFlex
OM3+ LC/LC Optical
Cable (BK840A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 30
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP 15 m PremierFlex
OM3+ LC/LC Optical
Cable (BK841A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
HP 30 m PremierFlex
OM3+ LC/LC Optical
Cable (BK842A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 31
QuickSpecs
HP 4800G Switch Series
Accessory Product Details
HP 50 m PremierFlex
OM3+ LC/LC Optical
Cable (BK843A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
To learn more, visit: www.hp.com/networking
© Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
DA - 13798
EMEA — Version 6 — October 19, 2011
Page 32
Download PDF
Similar pages