MIT-06I POE Active Splitter with Isolation

MSTronic Co.,Ltd.
2F, 12, Gongshang Rd., Wugu Township, Taipei County, Taiwan
TEL:886-2-2293-0159
FAX:886-2-2292-8851
E.MAIL: mstronic@yahoo.com.tw
WEB: http://www.mse.com.tw
MIT-06I
POE Active Splitter with Isolation
SPECIFICATION
FUNCTION: MSTronic’s MIT-06I Power over Ethernet (PoE)
Active Splitter offers a compact and cost effective, for remote
powering of WLAN Access Points, VoIP and network security
cameras. The MIT-06I PoE Active Splitter works with Power
Injector, as a data/power splitter and DC to DC converter.
Compliant with IEEE 802.3af and CISCO inline-power
injector, All materials meet RoHS standard.
1. INPUT :
1.1 Input Voltage:
DC-40V to DC-60V NORMAL= -48V
1.2 Under Voltage Lockout: DC -30V
2. OUTPUT :
2.1 Output Voltage & Current:
MODEL
MIT-06I-0805
MIT-06I-0809
MIT-06I-0812
MIT-06I-1205
MIT-06I-1212
MIT-06I-1224
OUTPUT
+5V
+9V
+12V
+5V
+12V
+24V
Max. load
1.6A
0.88A
0.67A
2.4A
1.0A
0.5A
Power
8W Max
8W Max
8W Max
12W Max
12W Max
12W Max
Min. Load
0A
0A
0A
0A
0A
0A
Load reg. %
5%
5%
5%
5%
5%
5%
Line reg. %
1%
1%
1%
1%
1%
1%
Ripple %
2%
2%
2%
2%
2%
2%
Noise %
5%
5%
5%
5%
5%
5%
TOTAL POWER :8 ~ 12W
Note 1:
Ripple & Noise bandwidth is from DC to 20Mhz.
Terminated With a 47uF Capacitor and 0.1uf MPE Capacitor of Proper Polarity.
MSTronic Co.,Ltd.
2F, 12, Gongshang Rd., Wugu Township, Taipei County, Taiwan
TEL:886-2-2293-0159
FAX:886-2-2292-8851
E.MAIL: mstronic@yahoo.com.tw
WEB: http://www.mse.com.tw
3.
EFFICIENCY : 78% min @-48Vin dc
4. PROTECTION
4.1 Short Circuit Protection
output Short GND Terminal will not damage the Power Supply and will
Auto-Reset.
Mode is current limits(IO(lim) = io*1.5 max)
4.2 Operation frequency is 100KHZ (min)
4.3 Isolation Voltage : 1500Vrms
4.4 Isolation Resistance :100M ohms (min)
4.5 Input Set class Resistance : 25K ohms
5.
5.1
5.2
5.3
5.4
GENERAL DESCRIPTION
Operation Temperature:
Storage Temperature:
Operation Humidity:
Cooling:
-25 - +60 Degree
-40 - +85 Degree
5% - 90% RH
Free air cooling
6. RJ-45 CONNECTOR & PINOUT
RJ -45 Output (Data Only)
Pin
Symbol
Description
1
Rx+
Data Receive
2
Rx-
Data Receive
3
Tx+
Data Transmit
4
NC
Not Connected
5
NC
Not Connected
6
Tx-
Data Transmit
7
NC
Not Connected
8
NC
Not Connected
Note: 1. pins 7 and 8(-Vdc) should not be shorted to ground.
2. power input could be on 1,2,3,6 (Cisco) or 4,5,7,8 (802.3af)
6.2 DC Power Plug diameter: 5.5Φ/2.1Φ, length: 12+/-0.5mm, 180 degree angle. Polarity : inside
(+), outside (-)
MSTronic Co.,Ltd.
2F, 12, Gongshang Rd., Wugu Township, Taipei County, Taiwan
TEL:886-2-2293-0159
FAX:886-2-2292-8851
E.MAIL: mstronic@yahoo.com.tw
WEB: http://www.mse.com.tw
7. MECHNICAL AND DIMENSION
7.1 Plastic Case Material: ABS
7.2 Plastic Case Finish: Texture
7.3 Plastic Case Color: Gray
7.4 Plastic Case Dimension: 85mm (d) * 76mm (w) * 36mm (h)
7.5 Weight: 110g
7.6 CAT-5 UTP Cable Length: 30cm, RJ-45 plug, Gray color.
7.7 Power Cable Length: 30cm, DC power plug, Gray color
8. E M I
Meet FCC Class B standard
Meet NE55022 Class B standard
Download PDF
Similar pages