PiXORD-128

100M IR Network Camera

Makes surveillance possible when it's too dark to see

Nighttime Outdoor Video Surveillance

- Illuminates that which cannot be seen

- Combines both day and night features

- Enhanced Web-based control

Main Features

- Highly configurable event handling including motion detection

- Built-in Web server for remote management

- Infrared radiant distance: 80~100M

- Aluminum outdoor housing: IP 66 Waterproof Standard

www.pixord.com

PiXORD-

128

100M IR Network Camera

Makes surveillance possible when it's too dark to see

Specifications

Network Camera Hardware

System

CPU: 32-Bit RISC Processor

ROM: 2MB Flash ROM

RAM: 16MB SDRAM

Watchdog: Chip to monitor system voltage tolerance and abnormal program execution

Connectors

1x RJ-45 connector for Ethernet

1x BNC Video out connector

1x 12V DC connector

2x LEDs to indicate network and power/system status

GPIO Terminal Block for: - 4x opto-isolated sensor inputs

- 1x relay output

- 1x RS-485 COM port for external PTZ devices

- 1x video input

2x DIP switches; video source selector, and 75 ohm impedance match switch

Video

Internal CCD Sensor

1/3” Sony SuperHAD interlaced color/monochrome CCD (Day/Night)

0 Lux (F1.2)

Lens

Standard package:

TAMRON 4mm, DC-Iris F1.2~360 IR Lens

Image Compression

JPEG; MJPEG

Video Adjustment

Auto White Balance (AWB on)

Auto Gain Control (AGC on/off)

Back Light Compensation (BLC on/off)

Auto Electronic Shutter (AES on/off)

Auto Day/Night (auto switch between color/monochrome in low light)

Brightness, Contrast, Hue, Saturation, Quality Level (compression), Frame rate

Resolutions

Full (4SIF): NTSC = 704x480; PAL = 704x576

SIF: NTSC = 352x240; PAL = 352x288

QSIF: NTSC = 176x112; PAL = 176x144

Performance

Up to 30/25 frames per second (SIF); up to 4 FPS (Full)

Network throughput: Max. 800KB/s, 30 simultaneous connections

Network

Network Interface

10/100 Base-T Ethernet

Protocols

TCP/IP, ARP, ICMP, HTTP, FTP, Telnet, SMTP, DHCP, DNS, DDNS

Mechanical Design

Dimensions

168(L) x 77(W) x 54(H)mm

Net Weight

1.1kg

Approvals

CE / FCC

Package Contents

CD Title with manuals and software

Quick Installation Guide

One Ethernet Cable

Power Adapter

Distributed By:

Management

Event management

Programmable event script with Wizard support

Trigger: 1. Motion detection

2. Scheduling (time/frequency)

3. Sensor Input

4. Video/Network connection

5. CGI

Action: 1. Send Alert Message

2. Store images to internal buffer (2MB pre/post alarm)

3. FTP images to remote site

4. E-mail message/images

5. Relay output to external device

6. HTTP server push to remote site

Installation

PiXORD IP Installer (Win32 Application)

Firmware Upgrade

Remote upgrade via FTP

PiXORD Firmware Upgrade utility (Win32 Application) (available with future upgrade)

Customized Web UI is upgradeable via FTP and Telnet

Client PC Requirements

Microsoft Windows 98se/Me/2000/XP

Microsoft Internet Explorer 5.x or above

Microsoft DirectX 9.0c

Macromedia Flash 6

Security

Multi-tiered access control for configuration

Recording

Directly from Web UI while viewing the live video stream

PiXORDWare Recording Software – free 16-channel surveillance and configuration software

Operating Environment

Operating Temperature

5° ~50°C (40° ~ 125°F)

Water Proof Standard

IP66 Standard

Input Voltage

12V DC, 1A

Power Consumption

10W

External Housing

Radiant Distance : 80~100m

Glass Cover : Φ 110 heat resistant glass

3mm thick

Infrared LED : Wave length: 850nm

Angle: 30°

Quantity: 17 units

Power on: CDS auto control, adjustable control point

Blower Control : On: 35°C; Off: 25°C

Heater Control : On: 15°C; Off: 25°C

IP Rating : IP 66

Mounting : Bottom

Construction : Aluminum

Power : AC 90~260V

Power Consumption : 22W

Operating Temperature : -20°C ~ +60°C (-4°F ~ +140°F)

Dimensions : Φ134 x 318mm(L), Bracket: 205mm(L)

Weight : 3500g