COMMERCIAL EQUIPMENT
Snowblowers | Triplex Finishing Mower | Stump Grinder | Brush Grapple | Rotary Sweep
Snow Blade | Rear Blade | Quick Hitch | Loader Attachment
Allied by Farm King Commercial Equipment:
snowblowers, mowers, attachments
FARM KING PRODUCT
LINE-UP
FARM KING PRODUCT
CATEGORIES
ALLIED HAS A LONG HISTORY OF QUALITYBUILT AGRICULTURAL AND COMMERCIAL
GRADE ATTACHMENTS.
Grain Handling
Tillage
Application Equipment
Hay Tools
Landscaping Equipment
Allied by Farm King - Commercial
Products
WWW.FARM-KING.COM
A wide variety of equipment has been developed to meet
the tough demands of farmers, contractors and landscapers.
The products that carry the Allied by Farm King brand uphold
the tradition of durable equipment that is adaptable to any
environment.
TABLE OF CONTENTS
Quick Hitch..........................4
Binary Snowblower............5
Snowblower.................... 6-7
Hydraulic Snowblower... 8-9
Triplex Finishing Mower.10-11
Stump Grinder..................12
Brush Grapple...................13
Rotary Sweep....................14
Snow Blade.......................15
Rear Blade....................16-18
Loader Attachments..........19
4 • QUICK HITCH
QUICK HITCH
Category I, II, III, II/III
THE BEST PART ABOUT OWNING A
TRACTOR IS PUTTING IT TO GOOD USE.
Regardless of the size of your tractor, a number of
implements are available to maximize the usefulness
of your machine. Whether you have a compact utility
tractor or a large four-wheel-drive, the quick hitch can
be matched to various types of mowers, tillers, rear
blades, box scrapers, cultivators and rakes to turn
any tractor into a multi-purpose farming tool.
SPECIFICATIONS
MODEL >>
Category
C3101
C3201
C3301
C3231
I
II
III
II / III
27-1/4
32-3/4
38-1/4
38-1/4
B
29-1/2
36-1/4
42-3/4
42-3/4
C
14-1/2 to 17-1/4
14-7/8
18-7/8
19
D
1-1/4
1-1/4
1-1/4
1-1/4
E
7/8
1-1/8
1-7/16
1-1/8
F
3/4
1
1-1/4
1-1/4
Weight
76 lb
134 lb
182 lb
185 lb
A
BINARY SERIES SNOWBLOWER • 5
THE ALLIED BY FARM KING BINARY SNOWBLOWER
OFFERS TWO IMPLEMENTS IN ONE MACHINE.
Allied by Farm King has been building reliable agricultural and
commercial snowblowers for more than four decades.
Farmers are making the most of their equipment assets and the Allied
by Farm King Binary Snowblower offers the flexibility to be used on a
skid steer or a tractor with a PTO and 3-point hitch.
SPECIFICATIONS
MODEL
Hydrulic flow
H500
H600
Standard
High
H660
Standard
High
H740
Standard
High
H840
Standard
High
Standard
High
Cutting width
50"
60"
66"
74"
84"
Cutting height
24"
24"
24"
25"
25"
Cutting edge
Replaceable opt.
Replaceable opt.
Replaceable opt.
Replaceable opt.
Replaceable opt.
Mount plate
Universal
Universal
Universal
Universal
Hydraulic requirements
Universal
17-23 gpm
23-26 gpm
17-23 gpm
23-26 gpm
17-23 gpm
23-26 gpm
17-23 gpm
23-26 gpm
17-23 gpm
23-26 gpm
Hydraulic horsepower, max
44 hp @
3300 PSI
69 hp @
3300 PSI
44 hp @
3300 PSI
69 hp @
3300 PSI
44 hp @
3300 PSI
69 hp @
3300 PSI
44 hp @
3300 PSI
69 hp @
3300 PSI
44 hp @
3300 PSI
69 hp @
3300 PSI
Fan speed, max
664 RPM
699 RPM
664 RPM
699 RPM
664 RPM
699 RPM
664 RPM
699 RPM
664 RPM
699 RPM
Fan torque, max
3350 ft-lb
521 ft-lb
3350 ft-lb
521 ft-lb
3350 ft-lb
521 ft-lb
3350 ft-lb
521 ft-lb
3350 ft-lb
521 ft-lb
Fan
4 blade
4 blade
4 blade
4 blade
4 blade
22"
22"
22"
23"
23"
Fan diameter
Fan drive motor
Fan drive
Auger diameter
Auger drive
8.0 cuin
11.9 cuin
8.0 cuin
11.9 cuin
8.0 cuin
11.9 cuin
8.0 cuin
11.9 cuin
8.0 cuin
#80 Chain
#80HS
#80 Chain
#80HS
#80 Chain
#80HS
#80 Chain
#80HS
#80 Chain
15"
15"
15"
15"
11.9 cuin
#80HS
15"
#50 Chain
#50 Chain
#50 Chain
#50 Chain
#50 Chain
Chute rotation
Hydraulic 270°
Hydraulic 270°
Hydraulic 270°
Hydraulic 270°
Hydraulic 270°
Chute deflector
Hydraulic
Hydraulic
Hydraulic
Hydraulic
Hydraulic
Adjustable and replaceable
Adjustable and replaceable
Adjustable and replaceable
Adjustable and replaceable
Adjustable and replaceable
480 lb
528 lb
573 lb
814 lb
906 lb
Skid shoes
Weight
6 • STANDARD SNOWBLOWER
SNOWBLOWER
PRODUCT OVERVIEW
Rear attach for use on acreages,
farms and municipalities
Category I, II & III
15 - 225 hp required
FEATURES
Spout rotator and deflector available
as manual or hydraulic
Standard shear bolts on all PTOs
OPTIONS
Commercial and truck loader chute,
model 1080 and 1200
SNOWBLOWER
5010, 6010, 6610, 7420, 8420, 9620, 1080, 1200
1
SPOUT DEFLECTOR
FAN
The spout deflector can be equipped with a hydraulic
A 4-blade fan is standard on all models. Dual augers are
cylinder kit or a 6-position manual adjustment.
standard on model widths 96" to 120".
HITCH
SPOUT ROTATOR
Most models feature an adjustable hitch that is designed
The spout rotator is available with manual or hydraulic
to adapt to 3-point hitches of varying lengths and heights,
positioning.
which reduces stress on the PTO shaft.
GEARBOX
The oil bath gearbox, available on 84", 96", 108" and 1200
models, adds longevity.
SKID SHOES
Adjustable/replaceable skid shoes are standard on all
models.
STANDARD SNOWBLOWER • 7
ALLIED HAS BEEN BUILDING RELIABLE
SNOWBLOWERS FOR MORE THAN THREE
DECADES.
Through the years the design has been refined to create an
excellent snowblower that is easy to use and maintain. PTOdriven Allied snowblowers attach to 3-point hitch and are
available in widths ranging from 50" to 120".
[1] #50, #60 or #80 sized chain dependant on model [2] Dual augers [3] 7 foot commercial
and 10 foot truck loading chutes are optional on the 1080 and 1200 models. [4] Binary models
available in widths of 50-84"; Propeller models available in all models.
2
3
4
SPECIFICATIONS
MODEL >>
5010
6010
6610
7420
8420
8420G
9620
1080
1200
Cutting width / height
50" / 25"
60" / 25"
66" / 24"
74" / 25"
84" / 25"
84" / 25"
96" / 36"
108" / 41"
120" / 41"
Replaceable cutting edge
N/A
N/A
N/A
N/A
N/A
N/A
Optional
Yes
Yes
Fan type / diameter
4-blade / 22"
4-blade / 22"
4-blade / 22"
4-blade / 23"
4-blade / 23"
4-blade / 23"
4-blade / 32"
4-blade / 36"
4-blade / 36"
Replaceable fan housing
N/A
N/A
N/A
N/A
N/A
N/A
N/A
7 gauge
7 gauge
Drive fan
540 rpm open gear
540 rpm oil bath gearbox
1000 rpm oil bath gearbox
Auger diameter
15"
15"
15"
15"
15"
15"
15" (dual)
15" (dual)
15" (dual)
Auger drive
#50 chain
#50 chain
#50 chain
#50 chain
#50 chain
#50 chain
#60 chain
#80 chain
#80 chain
Spout rotator
- manual (hand crank)
- hydraulic
Standard
Optional
Standard
Optional
Standard
Optional
Optional
Standard
Optional
Standard
Optional
Standard
Optional
Standard
N/A
Standard
N/A
Standard
Spout deflector
- manual (6 position)
- hydraulic
Standard
Optional
Standard
Optional
Standard
Optional
Standard
Optional
Standard
Optional
Standard
Optional
Standard
Optional
N/A
Standard
N/A
Standard
Skid shoes
Adjustable and replaceable
Hitch category
Cat. I standard
Cat. I standard
Cat. I standard
Cat. I standard
Cat. II bushings
Cat. I & II heavy
frame optional
Cat. II std
Cat. II Q.H. std
Cat. III Q.H.
narrow
Cat. II std
Cat. II Q.H. std
Cat. III Q.H.
narrow
Cat. I & II std
Cat. II Q.H. std
Cat. III Q.H.
narrow
Cat. II std
Cat. III Q.H. std
Cat. III Q.H.
narrow
Cat. II std
Cat. III Q.H. std
Cat. III Q.H.
narrow
Hitch adjustment
4 position
4 position
4 position
2 position
2 position
2 position
Fixed
2 position
2 position
HP requirement
15 - 30 hp
20 - 40 hp
22 - 40 hp
40 - 70 hp
60 - 90 hp
60 - 90 hp
90 - 125 hp
120 - 180 hp
180 -225 hp
Weight
422 lb
470 lb
515 lb
756 lb
848 lb
878 lb
1243 lb
2398 lb
2600 lb
8 • HD HYDRAULIC SNOWBLOWER
HD HYDRAULIC
SNOWBLOWER
PRODUCT OVERVIEW
Built for skid steer attachment
Widths range from 60" to 84"
17 to 40 GPM
FEATURES
All components are
hydraulically driven
Replaceable cutting edge
Adjustable skid shoes are standard
Heavy-gauge steel
OPTIONS
6" width extenders
HD HYDRAULIC SNOWBLOWER
Models 6025, 7225, 7235, 8425, 8435
1
HYDRAULIC MOTOR CHAIN DRIVE ASSEMBLY
With a hood turning range of 270º Allied by Farm King HD
Hydraulic Snowblowers give you superior control when
John Deere 14 pin. A magnetic cab mounted control box is
available on all other models.
moving snow.
HYDRAULIC MOTORS
WIRING HARNESS
hydraulic motors mounted directly on the fan and auger
Allied by Farm King HD Hydraulic Snowblowers have
The Allied by Farm King HD Hydraulic Snowblower series
shaft eliminating couplers and chain drive assemblies for
have a wiring harness to fit almost any brand on the
simplicity and ease of maintenance. A hydraulic relief
market. Compatibility available with: Bobcat 14, pin ASV,
replaces traditional shear pin technology for increased
Cat “B / C / D” series 8 pin, Case / New Holland 14 pin and
productivity and reduced downtime.
HD HYDRAULIC SNOWBLOWER • 9
THE ALLIED BY FARM KING HD HYDRAULIC
SNOWBLOWERS HAVE BEEN ENGINEERED TO
MAXIMIZE YOUR SKID STEERS EFFICIENCY.
Available in high and standard flow configurations, Allied by
Farm King blowers will connect with any modern skid steer.
Designed to be durable and reliable, Allied by Farm King
products are the best choice for industrial and commercial
snow removal.
3
2
4
[1] Hydraulic motor chain drive. [2] Wiring harness fits most skid steer brands. [3] A hydraulic motor mounts
directly on the fan and auger shaft eliminating couplers and chain drive assembly.
SPECIFICATIONS
MODEL
6025
7225
7235
8425
8435
Cutting width
60"
72"
72"
84"
84"
Cutting height
25"
25"
35"
25"
35"
Mount plate
Universal
Universal
Universal
Universal
Universal
Hydraulic requirements
17 - 23 GPM
17 - 23 GPM
32 - 40 GPM
17 - 23 GPM
32 - 40 GPM
Throwing distance
Up to 40'
Up to 40'
Up to 40'
Up to 40'
Up to 40'
Fan
4-blade
4-blade
4-blade
4-blade
4-blade
Fan diameter
20"
20"
24"
20"
24"
Auger diameter
14"
14"
18"
14"
18"
Drive auger
Hydraulic motor
Hydraulic motor
Hydraulic motor
Hydraulic motor
Hydraulic motor
Chute rotation
270°
270°
270°
270°
270°
Chute deflector
Hydraulic
Hydraulic
Hydraulic
Hydraulic
Hydraulic
Cutting edge
1/2" x 4" bolt-on
1/2" x 4" bolt-on
1/2" x 4" bolt-on
1/2" x 4" bolt-on
1/2" x 4" bolt-on
Skid shoes
Adjustable and
replaceable
Adjustable and
replaceable
Adjustable and
replaceable
Adjustable and
replaceable
Adjustable and
replaceable
Weight
828 lb
923 lb
1084 lb
951 lb
1108 lb
10 • TRIPLEX FINISHING MOWER
TRIPLEX FINISHING
MOWER
PRODUCT OVERVIEW
One of the highest measured tip
speeds in the industry creates
powerful suction for a clean cut
45 to 80 hp required
FEATURES
Slide adjustment on the gearbox for
easy belt tensioning
Blade overlap of 1-5/8" to 2-5/8"
minimizes stripping
Hard surface cutting edges are
standard on all models
OPTIONS
2-5/16" ball hitch
TRIPLEX FINISHING MOWER
Models 450, 550, 650 and 750
TRANSPORT
BLADE OVERLAP
The Triplex Finishing Mower is designed to be transported
There is a 1-5/8" blade overlap on the 450, while all the
with ease. A cast clevis hitch is standard and a 2-5/16" ball
other models have a 2-5/8" blade overlap. This overlap helps
hitch is optional for road transport. The 5-position hitch
to prevent stripping, especially when turning.
adjustment makes it easy to move, regardless of the hitch
height of the tow vehicle. The decks are lifted into position
YOKE DESIGN
by hydraulic cylinders and are automatically locked in place
A forgiving yoke design creates the ability to follow the
for transport. The decks are unlocked right from the tractor
terrain, yet maintain a seamless finish, available on models
seat using a cable, or can be released using the optional
550 and 650.
hydraulic system.
WHEELS
ROLLER BEARINGS
The model 750 has four wheels on each of the three decks.
Tapered roller bearings in the wheel hubs ensure long-
Models 650 and 550 have four wheels on the wing decks
term reliability without needing frequent lubrication. The
and two on the center deck. The 450 has three wheels on
standard front UHMW roller prevents scalping on uneven
the wing decks and two on the center deck.
turf.
TRIPLEX FINISHING MOWER • 11
ALLIED BY FARM KING HAS BEEN MAKING
FINISHING MOWERS FOR MORE THAN 15 YEARS.
Three of these finishing mowers together create one
magnificent volume grass trimmer: the Triplex Finishing
Mower. Nine blades generate a powerful vacuum for a crisp,
clean cut. Each deck floats independently over rolling terrain
for a uniform, manicured trim.
[1] Heavy-duty deck and structural supports have solid reinforcing rods around the edges.
[2] Adjustable poly roller to prevent scalping. [3] Each wheel assembly includes a cutting height
adjustment on the 1-1/4 inch wheel yoke shaft. [4] Transport position.
1
2
3
4
SPECIFICATIONS
MODEL
450
550
650
750
Cutting width
11' (3.35 m)
13.6' (4.15 m)
16' (4.88 m)
19.9' (6.07 m)
Transportation width bottom / top, approx.
67" / 67"
86" / 100"
67" / 67"
79" / 102"
Transportation height / length, approx.
92" / 15' 9"
84-1/2" / 15' 9"
92" / 15' 9"
121-1/2" / 16' 9"
Recommended horsepower
45 hp
55 hp
65 hp
80 hp
Wing frame
2" x 3" x 1/4" wall tube
2" x 3" x 1/4" wall tube
2" x 3" x 1/4" wall tube
2" x 3" x 1/4" wall tube
Wing flex*
30° up 17° down
35° up 16° down
30° up 11° down
30° up 11° down
Deck overlap
5"
8.5"
8"
8"
Gear box rating at 540 RPM
66 horsepower - divider box / 30 horsepower - wing boxes
Hitch type
Cast clevis ‑ standard, 2 5/16" ball hitch ‑ optional
Driveline main / wings
Series 4-80° CV / series 2
Series 6-80° CV / series 2
Series 6-80° CV / series 2
Series 6-80° CV / series 2
Deck width / thickness
4' / 10 Ga.
5' / 7 Ga.
6' / 7 Ga.
7' / 7 Ga.
Deck tires
8 (15" x 6" x 6")
10 (15" x 6" x 6")
10 (15" x 6" x 6")
12 (15 " x 6 " x 6 ")
Main frame tire
2 (27" x 10-1/2" x 15")
2 (27" x 10-1/2" x 15")
2 (27" x 10-1/2" x 15")
2 (27" x 10-1/2" x 15")
Blades per deck / overlap
3 blades / 1-5/8"
3 blades / 2-5/8"
3 blades / 2-5/8"
3 blades / 2-5/8"
Blade tip speed
15,485 ft/min
15,829 ft/min
18,737 ft/min
18,552 ft/min
Cutting height
1-1/2" to 4-1/2"
1-1/2" to 4-1/2"
1-1/2" to 4-1/2"
1-1/2" to 4-1/2"
Mower drive system
2 belt B groove
2 belt B groove
2 belt B groove
2 belt B groove
Front roller
4" x 7" UHMW Poly
4" x 7" UHMW Poly
4" x 7" UHMW Poly
4" x 7" UHMW Poly
Weight
2730 lb
3919 lb
3590 lb
4633 lb
* Not recommended for operation greater than 30°, actual measurement based on mower deck flex.
12 • STUMP GRINDER
1
[1] Large 26 and 36 inch
cutting wheel diameter.
[2] Manual tilt adjustment
up to 15 degrees.
STUMP GRINDER
Skid Steer and 3-Point Mount
STUMP GRINDER
PRODUCT OVERVIEW
2
THE ALLIED BY FARM KING STUMP GRINDER CAN
CUT THROUGH EVEN THE HARDEST STUMPS.
Constructed for fast and easy stump
removal
The impressive 45 degree swing arc allows the stump grinder
Category I, II and Universal
skid steer
easily controlled using the tractor or skid steer hydraulic levers.
15 - 45 hp required
to cover greater surface areas of larger trees. The grinder is
Both 3-point hitch grinder models use a slip clutch with the skid
steer unit using system pressure.
FEATURES
Carbide-tipped cutting teeth
5 – 8 inches of cutting depth
Rubber chip deflector
3/4 inch cutting wheel thickness
Easily accessible grease fittings
SPECIFICATIONS
MODEL
Hitch
Overall length
Drive system protection
Gearbox rating / ratio
Cutting wheel construction
Cutting wheel thickness
Cutting wheel diameter
Cutting wheel speed @540 PTO RPM
Number of teeth
Cutting teeth construction
Cut height above ground
Cut depth below ground
Max. cut depth per pass
Max. horizontal cut
Swing arc
Min. power / flow required
Max. power / flow
Drive system
PTO speed
Weight
2628
Cat. I
75"
Slip clutch
60 hp / 1:1.5
3/4"
26"
810 RPM, 5,515 ft/min
33
Carbide steel bolt in
18"
10"
5"
28"
45°
22 PTO hp
50 PTO hp
PTO / Series 5
540 RPM
660 lb
3633
Cat. I / II
80"
Slip clutch
100 hp / 1:1.46
Welded 2 piece laminated steel
3/4"
36"
788 RPM, 7,430 ft/min
42
Carbide steel bolt in
18"
15"
8"
33"
45°
45 PTO hp
100 PTO hp
PTO / Series 6
540 RPM
880 lb
2628H
Universal skid steer
72"
System pressure
60 hp / 1:1.5
3/4"
26"
810 RPM, 5,515 ft/min
33
Carbide steel bolt in
18"
10"
5"
28"
45°
15 GPM
25 GPM
Hydraulic
540 RPM @ 19.4 GPM
757 lb
BRUSH GRAPPLE • 13
1
BRUSH GRAPPLE
Models 6254, 7764
STUMP GRINDER
PRODUCT OVERVIEW
Constructed for picking up brush and
other debris
Available in widths of 62
and 77 inches
95 - 150 hp required
2
THE LARGE 50 INCH GRAPPLE OPENING ALLOWS
THE OPERATOR TO PICK LARGE QUANTITIES OF
BRANCHES AT ONE TIME.
Two 2500 psi cylinders squeeze any kind of brush quickly and
easily. Simply mount the Allied brush grapple to the front of any
loader for increased versatility.
FEATURES
Reinforced tubes between lower tines
[1] Tine points are designed to go under logs and brush, leaving nothing on the
ground. [2] Replaceable weld-on tine points.
Serrated upper tines
Pivot Pin designed with tight tolerances
Hardened steel construction
OPTIONS
Available in skid steer or tractor
mounting configurations
SPECIFICATIONS
MODEL
Overall width
Overall depth
Overall height closed
Grapple opening
Upper grapple widths
Tine Spacing
Number of tines / grapples (lower / upper)
Reinforcing tubes between lower tines
Number of hydraulic cylinders
Cylinder bore
Cylinder stroke
Cylinder rod diameter
Cylinder pressure rating
Horsepower rating, maximum
Weight
6254
7764
62"
25"
54"
50"
19.25"
15"
5/4
Standard
2
2"
10"
1.125"
2500 psi
95 PTO HP
790 lb
77"
25"
54"
50"
19.25"
15"
5/4
Standard
2
2"
10"
1.125"
2500 psi
150 PTO HP
970 lb
14 • ROTARY SWEEP
1
ROTARY SWEEP
3-Point and Skid Steer Mount
ROTARY SWEEP
PRODUCT OVERVIEW
For use in municipalities, farms,
construction sites and airports; built to
remove dirt, sand, gravel and trash
Category I and skid steer
2
THE ALLIED BY FARM KING ROTARY SWEEP CUTS
CLEANING JOBS IN HALF WITH A RUGGED AND
DURABLE DESIGN.
The rotary sweep is available in 5 to 7 foot sweeping widths,
making sure no surface goes untouched. Rear mounted for
Broom angles up to 30° right or left
tractors and front mounted for skid steers allows the Allied
FEATURES
rotary sweep to easily be maneuvered around obstacles.
Large brush diameter of 32 inches
Double gearbox drive
OPTIONS
Sprinkler system for dust control / Dirt
deflector
SPECIFICATIONS - 3-POINT MOUNT
MODEL >>
6032P
6032W
Overall width
69"
69"
Brush diameter
32"
32"
Sweeping width
60"
60"
Width at 30° angle
53"
53"
Mounting system
Cat. I
Cat. I
Brush material
Poly
Poly /
Wire
PTO RPM range
540
540
Sprinkler system
Opt.
Opt.
Dirt deflector
Opt.
Opt.
Weight
640 lb
640 lb
7232P
81"
32"
72"
64"
Cat. I
Poly
540
Opt.
Opt.
740 lb
[1] Poly or a combination of poly and wire brushes is available. [2] Quick attach skid steer
mounts for easy hook up.
7232W
81"
32"
72"
64"
Cat. I
Poly /
Wire
540
Opt.
Opt.
840 lb
8432P
93"
32"
84"
76"
Cat. I
Poly
540
Opt.
Opt.
740 lb
8432W
93"
32"
84"
76"
Cat. I
Poly /
Wire
540
Opt.
Opt.
840 lb
SPECIFICATION - SKID STEER MOUNT
MODEL >>
6032PS
6032WS
7232PS
Overall width
69"
69"
81"
Brush diameter
32"
32"
32"
Sweeping width
60"
60"
72"
Width at 30° angle
53"
53"
64"
Mounting system
Skid steer Skid steer Skid steer
Brush material
Poly
Poly / Wire
Poly
Hyd. motor rating
16 GPM
16 GPM
16 GPM
Sprinkler system
Opt.
Opt.
Opt.
Dirt deflector
Opt.
Opt.
Opt.
Weight
640 lb
640 lb
740 lb
7232WS
8432PS
81"
93"
32"
32"
72"
84"
64"
76"
Skid steer Skid steer
Poly / Wire
Poly
16 GPM
16 GPM
Opt.
Opt.
Opt.
Opt.
740 lb
840 lb
8432WS
93"
32"
84"
76"
Skid steer
Poly / Wire
16 GPM
Opt.
Opt.
840 lb
SNOW BLADE • 15
1
SNOW BLADE
Skid Steer and Euro Mount
SNOW BLADE
PRODUCT OVERVIEW
Constructed for residential and
commercial snow removal
2
THE EXTREMELY VERSATILE ALLIED BY FARM KING
SNOW BLADE CAN COME EQUIPPED FOR A FRONT
END LOADER OR SKID STEER CONFIGURATION.
25 - 80 hp recommended horsepower
The snow blade is constructed using 3/8 inch by 6 inch cutting
FEATURES
blade. Furthermore, the cutting edge is reversible to extend the
10 gauge blade thickness
overall life of the blade. At each end of the blade are adjustable
7 and 9 foot models have 5 degree
oscillation
skid shoes for a precise blading depth.
2 extension trip springs
OPTIONS
Hydraulic angle kit
Crossover release valve
[1] Dual acting cylinder hydraulics provide hands free angle adjustment. [2] The 5
degrees of oscillation allows the blade to contact uneven surfaces.
SPECIFICATIONS
MODEL >>
Overall width
Overall height
Moldboard thickness
Cutting edge
Lateral oscillation
Manual angle positions
Skid steer mount
Adjustable skid shoes
Horsepower range
Weight
W6021S
60"
21"
10 gauge
3/8" x 6"
n/a
5
Universal
Standard
up to 40 hp
334 lb
W7221S
72"
21"
10 gauge
3/8" x 6"
n/a
5
Universal
Standard
up to 40 hp
350 lb
W9027E
90"
27"
10 gauge
3/8" x 6"
5°
5
n/a
Standard
30 - 80 hp
555 lb
W9027S
90"
27"
10 gauge
3/8" x 6"
5°
5
Universal
Standard
30 - 80 hp
530 lb
W10827E
108"
27"
10 gauge
3/8" x 6"
5°
n/a
n/a
Standard
40 - 95 hp
665 lb
W10827S
108"
27"
10 gauge
3/8" x 6"
5°
n/a
Universal
Standard
40 - 95 hp
690 lb
16 • REAR BLADE
REAR BLADE
PRODUCT OVERVIEW
Constructed for ditching, scraping,
landscaping and snow removal
Category I, II and III
15 - 150 hp required
FEATURES
Reversible / replaceable cutting edge
No tools are required for
adjusting the angle
Pivot Pin designed with tight
tolerances
OPTIONS
Hydraulic angle adjustment, Series 60
REAR BLADE
Series 30, 45, 60, 80, 100, 155
1
PRECISION ENGINEERED
These rear blades have been precisely built, with particular
attention to the pivot point. To minimize metal-on-metal
wear and maximize blade longevity, the pivot point has
been designed with tight tolerance and built to those
specifications.
ADJUSTMENT
The manual tilt adjustment on the 45 Series tilts the blade
up to 15°. The same bolts adjust the sideshift feature to
move the blade up to 12" off-center. Tilt on the 30 and 60
Series is adjusted on the 3-point hitch.
CUTTING EDGE
Allied by Farm King rear blades feature a reversible and
replaceable cutting edge.
STANDARD EQUIPMENT
Allied Rear Blades are quick hitch compatible and the
parking stand is standard equipment.
REAR BLADE • 17
ALLIED BY FARM KING HAS BEEN BUILDING A
WIDE VARIETY OF REAR BLADES FOR SEVERAL
DECADES.
These blades are manufactured using more steel, which adds
strength, longevity and durability to each blade. Available in five
series suitable for tractors ranging from 15 hp to 150 hp, Allied
by Farm King Rear Blades are capable of tackling tough scraping
projects.
[1] Manual or hydraulic offset adjustment is available on 80 Series and larger. [2] Adjusting
the angle on models without hydraulic cylinders does not require tools. [3,4] The manual tilt
adjustment on the 45 Series tilts the blade up to 15°. The same bolts adjust the sideshift feature.
2
3
4
SERIES
MODEL
Maximum hp
3048
3060
3072
4560
4572
4584
6084
6096
8084
8096
80108
10096
100108
15596
155108
155120
155144
30
30
30
45
45
45
60
60
80
80
80
100
100
155
155
155
155
3-point hitch
Category I
Moldboard thickness
Moldboard width
Category I
1/4"
48"
60"
Moldboard height
Adjustment
Adjustment, angle
Adjustment, tilt
Category I & II
Category II
1/4"
1/4" Boxed reinforcement
1/4"
72"
60"
72"
84"
84"
96"
84"
96"
96"
108"
120"
13"
16"
18"
18"
21.25"
Manual 5-position
Manual or hydraulic
Manual or hydraulic
Manual or hydraulic
30° left or right
40° left or right
40° left or right
30° left or right
30° left or right
30° left or right
3-point hitch
linkage adj.
Manual
15° blade adjustment
3-point hitch
linkage adj.
N/A
N/A
Up to 12" off center
N/A
N/A
N/A
N/A
3"
N/A
1/4" x 3" reversible
155
180
Manual or hydraulic 20° left or right
High carbon 1/2" x 6" reversible
263
283
289
405
144"
Manual or hydraulic 13° blade adjustment
N/A
130
108"
Manual 5-position
N/A
Weight, lb
5/16" Boxed reinforcement
96"
12 1/2"
Sideshift
Cutting edge
108"
Category II & III
Manual 5-position
Offset
King pin
Category II & III
N/A
N/A
3 1/2"
4"
High carbon 1/2" x 6" reversible
450
939
969
989
1287
1352
1683
1710
1749
Dual gauge wheel kit
N/A
N/A
N/A
Optional
Optional
Optional
Skid shoes
N/A
N/A
N/A
Optional
Optional
Optional
Racket jack
N/A
N/A
N/A
Optional
Optional
Optional
1846
18 • REAR BLADE
Series 30
Series 45
Series 60
FOR TRACTORS 15-30 HP
FOR TRACTORS 20-45 HP
FOR TRACTORS 30-60 HP
Available in 4', 5' and 6' widths.
Available in 5', 6' or 7' widths. 15°
Available in 7' and 8' widths.
Manual adjustment. Tilt adjustment
vertical tilt on both sides. Cutting
Mechanical linkage. Hyd. adjustment
is 3-point hitch linkage adjustment.
edge constructed of high carbon
is optional. Cutting edge constructed
steel, 1/2" x 6".
of high carbon steel, 1/2" x 6".
SERIES
3-point hitch
Angle
30
Cat. I
30° left or right
SERIES
3-point hitch
Angle
45
Cat. I
40° left or right
SERIES
60
3-point hitch
Cat. II, I optional
Angle
40° left or right
Angle - forward
5-position
Angle - forward
5-position
Angle - forward
5-position
Angle - reverse
5-position
Angle - reverse
5-position
Angle - reverse
5-position
Series 80
Series 100
Series 155
FOR TRACTORS 80 HP
FOR TRACTORS 100 HP
FOR TRACTORS 150 HP
Available in 7', 8' and 9' widths.
Available in 8' and 9' widths.
Available in 8', 9', 10' and 12' widths.
Angle adjustment, offset and tilt
Hydraulic angle adjustment, offset
Hydraulic angle adjustment, offset
can be fitted with either hydraulic
and tilt. Cutting edge constructed of
and tilt. Cutting edge constructed of
cylinders or mechanical linkage.
high carbon steel, 1/2" x 6".
high carbon steel, 1/2" x 6".
SERIES
3-point hitch
Angle
80
Cat. II
30° left or right
SERIES
3-point hitch
Angle
100
Cat. II and III
30° left or right
SERIES
3-point hitch
Angle
155
Cat. II and III
30° left or right
Angle - forward
5-position
Angle - forward
5-position
Angle - forward
5-position
Angle - reverse
5-position
Angle - reverse
5-position
Angle - reverse
5-position
LOADER ATTACHMENTS • 19
Standard A Frame
Regular A Frame
Heavy-duty A Frame
Pallet Fork A Frame Kit
For loader models 395, 495, 595, 695, 2495,
2595, and 2596. Brackets also available to fit
most non-Allied loaders. Ideal for round bales.
For loader models 395, 495, 595, 695,
795, 2495, 2595, 2596, 2795HD and 2895.
Available in skid steer and Euro style models.
60" for loader models 595, 695, 795, 895,
2595, 2596, 2795HD and 2895. Specifically
designed for round or square bales. 75"
model specifically designed to handle 6' plus
diameter round bales.
Available for all loader models and designed
to fit on all ‘A’ frame models. Forks available
in 48" (4,400 lb capacity) and 42" (2,000 lb
capacity) sizes.
Specifications
Weight
490 lb
Series
95
Series
Midmount
2000
Skid
Steer
Weight
254 lb
222 lb
329 lb
1-3
1-3
1-3
No. of spears
No. of spears
1
Spear lengths
32" / 49"
Spear lengths
32" /
49"
32" / 49"
32" /
49"
SERIES
60"
75"
Weight
310 lb
350 lb
No. of spears
1-3
1-3
SERIES
60"
75"
Spear lengths
32" / 49"
32" / 49"
Weight
690 lb
730 lb
Standard Bucket
Large Capacity/Snow Bucket
C2000 Series Grapple
C3000 Series Grapple
Available in 48", 60", 72", 84", 96" and 100".
Capacities range from 6.3 cu. ft. up to 1.19
cu. yd.
Available in 84" and 100" sizes. Capacities
range from 1.35 cu. yd. up to 2.25 cu. yd.
Comes standard with 84" cross tube to fit on
84" and larger standard and large capacity
buckets. Also designed for 85" manure bucket
with ten tines as shown here.
Grapple comes standard with 84" cross tube
to fit on 84" and larger standard and large
capacity buckets. Specifically designed to
handle 6' plus diameter round bales.
SERIES
95 Series
Midmount
2000
SERIES
95 Series
Midmount
2000
Model
C2000
C2062
Series
C3000
C3001
Weight
490 lb
510 lb
Weight
905 lb
980 lb
Weight
565 lb
565 lb
Weight
785 lb
801 lb
Square Bale Stacker Frame
Round Bale Squeeze
Skid Steer Adapter Plate
Ballast Box
For loader models 895, 2495, 2595, 2596,
2795HD and 2895. Install up to 8 additional
stabilizer spears. Telescopic extension kit for up to 3 square bales at a time.
For loader models 395, 495, 595, 695
and 795.
For loader models 95, 195, 295, 395, 495,
595, 2095, 2195, 2295, 2395, 2495, 2595
and 2596. Allows the user to pick up any
skid steer attachment.
For loader models 95, 2095, 195 and 2195.
Provides weight to the rear axle, which in
turn increases the stability and traction of
your tractor.
SERIES
95 Series
Midmount
2000
Weight
440 lb
400 lb
No. of spears
1-4
Spear lengths
32" / 49"
SERIES
4872
1-4
Bales
4' - 6'
SERIES
Skid Steer
32" / 49"
Rated
2,200 lb
Weight
120 lb
SERIES
95 Series
Midmount
2000
Weight
57 lb
57 lb
www.farm-king.com
1260 Clarence Avenue
Winnipeg, Manitoba Canada R3T 1T2
Ph.: 204.661.8711 | Fax: 204.654.2503
Toll Free: 888.524.1003
E-mail: info@buhler.com
www.farm-king.com
Equipment shown is subject to change without notice. ©2017 Buhler Trading Inc.
Printed in Canada. TTSX:BUI Ref: 022016-3000-LM P/N: PCOMMEQ
a division of Buhler Industries Inc.
Download PDF
Similar pages