w
w
.a
ce
ho
bb
y.
ru
Pro Series Scooters
w
Owner’s Manual
Read and understand this entire manual before
allowing child to use this product!
For assistance contact Razor. DO NOT RETURN TO STORE.
NOTE: Illustrations are for demonstration purposes only. Specifications subject
to change without notice.
v.1_09-11
CONTENTS
Safety Warnings ............................................................ 1
Before You Begin ........................................................... 2
Assembly Instructions ................................................ 2-3
Check Before Riding ................................................... 3-4
Safety Reminders .......................................................... 5
Warranty ........................................................................ 5
SaFETy WaRNINgS
AN IMPORTANT MESSAGE TO PARENTS: This manual contains
important information. For your child’s safety, it is your responsibility to
review this information with your child and make sure that your child
understands all warnings, cautions, instructions and safety topics. Razor USA
recommends that you periodically review and reinforce the information in this
manual with younger riders and that you are required to inspect and maintain
your child’s scooter to insure their safety.
ACCEPTABLE RIDING PRACTICES AND CONDITIONS
ru
Direct parental supervision is required. Scooters are meant to be used only
incontrolledenvironmentsfreeofpotentialtraffichazardsandnotonpublic
streets. Do not allow your child to ride a scooter in any areas where vehicle
trafficispresent.Childmustmaintainaholdofthehandlebarsatalltimes.
Never allow more than one child at a time to ride a scooter. Never use near
steps, sloped driveways, hills, roadways, alleys or swimming pool areas.
y.
GENERAL WARNING: Scooter riding can be a hazardous activity.
Scooters can, and are intended to move and it is therefore possible to get into
dangerous situations and/or lose control and/or fall. If such things occur you
can be seriously injured or die. LIKE ANY OTHER MOVING PRODUCT, USING
A SCOOTER CAN BE A DANGEROUS ACTIVITY AND MAY RESULT IN INJURY
OR DEATH EVEN WHEN USED WITH PROPER SAFETY PRECAUTIONS. USE AT
YOUR OWN RISK AND USE COMMON SENSE.
bb
Do not ride a scooter in wet weather. Scooters are intended for use on solid,
flat, clean and dry surfaces such as pavement or level ground without loose
debris such as rocks or gravel. Wet, slick or uneven and rough surfaces may
impair traction and contribute to possible accidents. Do not ride a scooter in
mud,ice,puddlesorwater.Avoidexcessivespeedsthatcanbeassociated
with downhill rides. Never risk damaging surfaces such as carpet or flooring
by use of a scooter indoors. Do not ride at night or when visibility is impaired.
• Alwayswearsafetyequipmentsuchashelmet,kneepadsandelbow
pads. Always wear a helmet when riding your scooter and keep the chinstrap securely buckled.
• Rideonsmooth,pavedsurfacesawayfrommotorvehicles.
ho
• Alwayswearshoes.
You will see people on TV and videos doing tricks or stunts. These are people
who have been practicing a long time and accept the risks of trick riding
activity. Do not assume that you can attempt to do the same tricks without
great risk.
• Avoidsharpbumps,drainagegratesandsuddensurfacechanges.Scooter
may suddenly stop.
ce
PROPER RIDING ATTIRE
• Avoidstreetsandsurfaceswithwater,sand,gravel,dirt,leavesandother
debris. Wet weather impairs traction, braking and visibility.
• Donotrideatnight.
Always ensure child is wearing proper protective equipment such as an
approved safety helmet. A helmet may be legally required by local law
or regulation in your area. A child should always wear shoes, never ride
barefooted or in sandals, and keep shoelaces tied and out of the way of
the wheels.
.a
• Brakewillgethotfromcontinuoususe.Donottouchafterbraking.
• Avoidexcessivespeedassociatedwithdownhillrides.
• Adultsmustassistchildrenintheinitialadjustmentprocedurestoassemble the scooter.
w
w
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS
FURTHER INCREASES RISK OF SERIOUS INJURY. USE AT YOUR OWN RISK
AND WITH APPROPRIATE AND SERIOUS ATTENTION TO SAFE OPERATION.
USE CAUTION.
• Obeyalllocaltrafficandscooteringlawsandregulations.
• Watchoutforpedestrians.
• Checkandsecureallfastenersbeforeeveryride.
• Replacewornorbrokenpartsimmediately.
• Donotexceedweightlimitspecifiedonproductboxandproductwarning
label.
w
WARNING: ALWAYS INSPECT SCOOTER PRIOR TO RIDING. Properly
inspecting and maintaining your scooter can reduce the risk of injury. Always
inspect your scooter before riding and regularly maintain it.
• Donotallowchildrenunderageeight(8)touseProSeriesscooters.All
children and preteens should ride with adult guidance at all times.
• Riderweightdoesnotnecessarilymeanachild’ssizeisappropriatetofit
or maintain control of the scooter.
WARNING: CHECK LOCAL LAWS REGARDING SCOOTER USE. Check
local laws and regulations to see where and how you may use your Razor
scooter legally. In many states and local areas scooter riders are required
BY LAW to wear a helmet. Check local laws and regulations regarding laws
governing helmet use and scooter operation in your area.
• Aparent’sdecisiontoallowhisorherchildtoridethisproductshouldbe
based on the child’s maturity, skill and ability.
• Thisscooterwasmanufacturedforperformanceanddurabilitybutitisnot
impervious to damage. Trick riding can over stress or damage any product,
including this scooter, and the rider assumes all risks associated with
high-stress activity.
1
BEFORE yOU BEgIN
Removecontentsfrombox.Inspectthecontentsoftheboxforscratchesinthepaintand/ordentsthatmayhave
occurred during shipping. Because your scooter was partially assembled and packed at the factory, there should not be
anyproblems,eveniftheboxhasafewscarsordents.
Grips
T-tube/ Steering column
ru
Handlebar
Down tube
Rear fender/brake
bb
Front fork
Deck
ho
Wheels and
wheel bearings
.a
ce
q Required Tools
5mm
Allen wrench
y.
Collar clamp
Fork headset locknut
WaRNINg: DO
NOT USE NON-RAZOR
PRODUCTS WITH YOUR
SCOOTER.
Razor scooters have been built to
certainRazordesignspecifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
or may not be compatible and will
void your warranty.
w
w
aSSEmBly INSTRUCTIONS
q Double Collar Clamp
w
WaRNINg: Failure to
properly install and tighten the
collar clamp may cause the rider to
lose control and fall. If you do not
understand these instructions or
the concept of “tighten securely”
seektheassistanceofaqualified
mechanic.
1 Loosen the collar clamp and
slide it upward. With a clock-wise
twisting motion, push and “thread”
the T-tube onto the fork until it
bottoms out on the fork headset
lock nut.
2 With the front wheel pointed
straight ahead, the handlebars
square to the front wheel and the
Razor logo facing the front, tighten
the clamp as shown. Tighten each
bolt securely.
2
aSSEmBly INSTRUCTIONS
q Triple Collar Clamp (on select models only)
ru
2 With the front wheel pointed
straight ahead, the handlebars
square to the front wheel and the
Razor logo facing the front, tighten
the clamp as shown. Tighten each
bolt securely.
2 With the front wheel pointed
straight ahead, the handlebars
square to the front wheel and the
Razor logo facing the front, tighten
the clamp as shown. Tighten each
bolt securely.
w
w
.a
1 Loosen the collar clamp and
slide it upward. With a clock-wise
twisting motion, push and “thread”
the T-tube onto the fork until it
bottoms out on the fork headset
lock nut.
ce
ho
bb
q Quad Collar Clamp (on select models only)
y.
1 Loosen the collar clamp and
slide it upward. With a clock-wise
twisting motion, push and “thread”
the T-tube onto the fork until it
bottoms out on the fork headset
lock nut.
CHECk BEFORE RIDINg
w
q Double Collar Clamp
Using a 5mm Allen wrench, check that the collar clamp bolta are tightened securely.
3
CHECk BEFORE RIDINg
q Triple Collar Clamp (on select models only)
ru
Using a 5mm Allen wrench, check that the collar clamp bolts are tightened securely.
ho
bb
y.
q Quad Collar Clamp (on select models only)
.a
q Wheels and Bearings
ce
Using a 5mm Allen wrench, check that the collar clamp bolts are tightened securely.
w
w
Under normal circumstances and conditions, Razor wheels and wheel bearings are maintenance free. Nonetheless, it
istheresponsibilityoftheownerorguardiantoperiodicallyinspectthewheelsforwearandtear,theaxleforproper
tightness and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops play, this is an
indicationofexcesswearandreplacementisnecessary.ReplaceimmediatelywithonlygenuineRazorwheels.Worn
wheels/bearings are considered normal wear-and-tear and are not covered by the Razor Warranty. Wheels other than
genuine Razor wheels may not be compatible with your Razor scooter. The use of anything other than genuine Razor
replacement parts may affect your safety and will void your warranty.
w
q Cleaning your Scooter
Wipe with a damp cloth to remove dirt and dust.
Do not use industrial cleaners or solvents as they may damage the surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners as they may damage or dissolve the plastic components or soften the decals or decal adhesive.
q How to Ride
Place one foot on the baseboard, push forward with the other foot. Steer. For enhanced cornering, lean slightly into the
direction of the turn. For controlled stops, apply the brake by stepping on the rear fender/brake. Razor recommends that
you practice applying the brake at various speeds and in an open area free from obstructions before riding your Razor
scooter around others.
WaRNINg: Wheelies
and other stunt-type riding reduces
your ability to maneuver and control
your scooter. Take the necessary
precautions, such as wearing
appropriate protective gear and
practice in an area safe for stunt
riding and free from obstructions.
SaFETy REmINDERS
PRE-RIDE CHECklIST
q
Check and secure all fasteners before every ride. Make sure the
collar clamp is locked properly in place before riding.
Replacement Parts
Replace worn or broken parts immediately.
Safety gear
Be Careful!
You will see people on TV and maybe even people you know doing
tricks and stunts. These are people who have been practicing on
scooters for a very long time. Don’t try something until you are
ready. Avoid steep inclines and don’t ride too fast — you can lose
control and fall. Skateboard parks are not designed for scooters.
Neverrideintrafficoronthestreetandwatchyoursurroundings
for pedestrians, bikers, boarders and skaters.
Maintain a hold on the handlebars at all times.
Always wear proper protective equipment such as an approved
safety helmet, elbow pads and kneepads. Always wear shoes
(lace-upwithrubbersoles),neverridebarefootedorinsandals,
and keep shoelaces tied and out of the way of the wheels.
y.
ru
q
q
q
loose Parts
ho
bb
DO NOT RETURN TO STORE
w
WaRRaNTy
.a
ce
Failure to follow these instructions may damage
your product and void your warranty.
Razordoesnotofferanextendedwarranty.Ifyouhavepurchasedan
extendedwarranty,itmustbehonoredbythestoreatwhichitwas
purchased.
This Limited Warranty will be void if the product is ever
•usedinamannerotherthanforrecreation;
•modifiedinanyway;
•rented.
__________________________________________
w
Razor limited Warranty
The manufacturer warranties this product to be free of manufacturing defects
for a period of 6 months from date of purchase. This Limited Warranty does
not cover normal wear and tear, or any damage, failure or loss caused by
improper assembly, maintenance, or storage.
w
For your records, save your original sales receipt with this manual.
The manufacturer is not liable for incidental or consequential loss or damage
due directly or indirectly to the use of this product.
Printed in China for:
Razor USA LLC
Copyright © 2003-2012 Razor USA, LLC. All rights reserved. RAZOR and the Razor Logo
Design are among the registered trademarks of Razor USA LLC in the United States and/or
select foreign countries.
09/2011
5
Download PDF
Similar pages