SINAQUATM INDUCTION HOLDING WELL
IHW062-34, IHW062-36
SinAquaTM Induction
Holding Well
Quantity
Item #
Note: Induction cooking
and holding requires the
use of induction
compatible (i.e. magnetic)
food pans (note: most are).
IHW062-34
Standard Features
Designed to accommodate Gastronorm or standard
hotel pans, half-pans: one 1/1 or three 1/3. Adaptor
plate available for other pan sizes.
•
Two depths available: IHW062-34 - 100mm (4”) and
•
IHW062-36 - 152mm (6”). Units only compatible with
•
one pan depth.
•
•
•
Drop-in rectangular design, stainless steel housing,
heavy duty energy efficient electronics, high-impact
polycarbonate top, stainless steel sides
Three separate control panels per unit
(front/center/back) allows for different products to be
held at different temperatures
Four standard temperature settings - 160, 170, 180,
190°F / 70, 75, 80, 90°C. More available via keypad
accessibility.
•
Integral automatic timer commences when pan
inserted in the well. Hold time is user selectable.
Display flashes when hold time has expired. Timer
can be turned on or off.
•
Spring-loaded sealed temperature sensor to ensure
reliable pan-contact temperature measurement
•
Microprocessor monitors vital components 120 times
per second to check for overheating, power supply
problems and more. Induction unit shuts off and
displays error codes enabling user to diagnose and
correct minor problems.
•
•
•
Automatic pan detection allows for instant energy
transmission to pan, and almost no energy
consumption when pan is not present (even if unit is
left on)
•
Standard Cat 5e or Cat 6 patch cables from unit to
control boxes are included (any replacement cables
MUST BE SHIELDED type)
Easy to clean polycarbonate/stainless construction
Works with any standard magnetic pan - including
18/8 (300 series) stainless pans which have been cold
worked.
•
Lock feature prevents unwanted setting changes
•
LED annunciators for “Heating” and “At Temp”
•
One 200-240VAC unit on a 15 amp circuit
•
While rated at 1.8kW per well, unit typically duty cycles
at _____ watts.
•
Two year parts and 1 year labour warranty
•
Made in the USA*
Specifications
Shall be a CookTek drop-in rectangular induction food
holding well, model _________ with a total KW rating of
1.8 kW.
Unit shall be manufactured in the United States and
constructed of an stainless steel housing and a highimpact polycarbonate top.
Unit shall be built with an auto shut-off feature to prevent
overheating, offer self-diagnostics, and have a pan
maximizer feature to ensure maximum heating of any
induction compatible pan.
Unit shall operate on ____ power with integral ______
Red LED display for precise user control and feedback cord and plug (supplied).
Maximum temperature limit prevents damage to pans
and/or unit
*of USA and imported parts
Ph:
1300 79 1954
Fax: 07 3345 6403
Email: cooktek@stoddart.com.au
Brisbane - Melbourne - Sydney - Perth - Adelaide
Australian Distributor:
Stoddart Food Service Equipment
IHW062-3x 14353_A USINTL
IHW062-34, IHW062-36
•
SINAQUATM INDUCTION HOLDING WELL
Product Name
SINAQUATM INDUCTION HOLDING WELL
IHW062-34, IHW062-36
SINAQUATM INDUCTION HOLDING WELL
•
Cooling clearance: 2” (55mm) from combustable materials, 6” (152mm) below
•
The maximum (do not exceed) ambient temperature is 50˚C/122˚F.
A
B
C
D
E
F
G*
H*
J
K
M
N
P
Q
R
Dimensions
IHW062-34
IHW062-36
inches mm inches mm
21.75
552 21.75
552
13.75
349 13.75
349
7.73
196
9.75
248
20.18
513 20.18
513
7.68
195
9.70
246
12.26
311 12.26
311
20.625
524 20.625
524
12.625
321 12.625
321
2.90
74
2.90
74
2.25
57
2.25
57
3.26
83
3.26
83
1.91
49
1.91
49
2.46
62
2.46
62
3.81
97
3.81
97
1.02
26
1.02
26
* Cutout dimensions can be up to
20.75” x 12.75” (527mm x 324mm)
Specifications
IHW062-34, IHW062-36
Model Number
IHW062-34
IHW062-36
Power Requirements
200-240VAC, 1 Ph
200-240VAC, 1 Ph
Power Consumption
3 x 600W (max)
3 x 600W (max)
200-240VAC, 50/60 Hz
200-240VAC, 50/60 Hz
7.5 A (max)
7.5 A (max)
100-600W per zone (1800W max)
100-600W per zone (1800W max)
160 ,170,180, 190°F / 70,75,80,90°C
160 ,170,180, 190°F / 70,75,80,90°C
Voltage
Amperage
Power Range
Preset Temperatures
Expanded Temperatures
Dimensions (in)
80,150,160,165,170,175,180,185,190,195,200,20 80,150,160,165,170,175,180,185,190,195,200,20
5,210, 220,230,240,250°F/
5,210, 220,230,240,250°F/
70,75,80,85,90,95,100, 105,110,115,120°C
70,75,80,85,90,95,100, 105,110,115,120°C
21.75” x 13.75” x 7.73”
21.75” x 13.75” x 7.73”
552 x 349 x 196
552 x 349 x 196
20.625” x 12.625”
20.625” x 12.625”
524 x 321
524 x 321
Weight
22.4 lbs / 10.1 kg
23.7lbs / 10.7 kg
Packaged Weight
25.9 lbs / 11.7 kg
27.2 lbs / 12.3 kg
24” x 18” x 12”
24” x 18” x 12”
607 x 457 x 305
607 x 457 x 305
6 ft / 1.8 m
6 ft / 1.8 m
NEMA 5-15P
NEMA 5-15P
7 ft / 2.1 m
7 ft / 2.1 m
Dimensions (mm)
Cutout Dimensions (in)
Cutout Dimensions (mm)
Packaged Dimensions (in)
Packaged Dims. (mm)
Power Cord Length
Plug Type
Rmte Ctrl Box Cord Length
Warranty
2 years parts and 1 year labour warranty
Note: Ambient air should not exceed 50˚C/122˚F. Dedicated circuit required. Many local codes exist, and it is the Owner and Installer’s responsibility to comply with those codes. CookTek
continually improves its products and reserves the right to change or improve specifications without notice.
Ph:
1300 79 1954
Fax: 07 3345 6403
Email: cooktek@stoddart.com.au
Brisbane - Melbourne - Sydney - Perth - Adelaide
Australian Distributor:
Stoddart Food Service Equipment
IHW062-3x 14353_A USINTL
Download PDF
Similar pages